Общий источник света.

Утопленный галогеновый потолочный источник света.

Бактерицидная камера КБ-Я-ФП Ультралайт позволяет сохранить инструменты стерильными после дезинфекции, не позволяя бактериям повторно заразить предметы. Материалы сохраняют чистоту до 7 суток, благодаря УФ-излучению, которое не выходит за пределы камеры. Камера состоит из: металлического корпуса, с шарнирно поднимающейся и опускающейся металлической крышкой с установленным свето-теплозащитным стеклом, полностью задерживающим УФ-излучение; металлических решеток для укладки стерильных инструментов; светотехнической части (ультрафиолетовая бактерицидная лампа мощностью 30W, пускорегулирующая аппаратура, блок управления и индикации). Камера используется как напольный вариант. Возможность установки решеток в двух уровнях позволяет увеличить загрузку медицинского инструмента в 1,5 раза по сравнению с аналогами, укомплектованными решетками одного уровня. Конструкция камеры имеет запатентованное решение, выраженное в вынесении цоколей и креплений бактерицидной УФ-лампы за пределы рабочего объема камеры, что существенно улучшает режимы поддержания стерильности. Эффективность данной конструкции доказана ВНИИ Профилактической Токсикологии и Дезинфектологии МЗ РФ. Наружные поверхности камеры допускают дезинфекцию способом протирания дезинфицирующими средствами, зарегистрированными и разрешенными в РФ для дезинфекции поверхностей по режимам, регламентированным действующими документами по применению дезинфицирующих средств, утвержденными в установленном порядке. Внутренние поверхности камеры устойчивы к обработке способом протирания средствами дезинфекции по МУ 287-113. Условия эксплуатации камеры соответствуют климатическому исполнению УХЛ 4.2 по ГОСТ Р 50444-92: температура от +10 С до + 35 C ; относительная влажность – 80 % при температуре 25 С. Тип камеры напольная Объем, л 107 Тип лампы TUV-30 Ширина, мм 950 Глубина, мм 600 Высота, мм 1170 Габаритные размеры столика, мм 900х430х805

Arco Lamp by Castiglioni for Flos

lampada ad arco di Achille Castiglioni

LAMPADA

Single, double, triple or four-tined street lamp.

Kaiser Leuchten (Gebr. Kaiser & Co. Leuchten KG) war ein bedeutender Leuchtenhersteller in Neheim.

Single, double, triple or four-tined street lamp.

3D parametric, Lumos Strahler, Lamp on a rail with 3 spots, with optional\n- spot size\n- spot position\n- spot angle

3D parametric, resolution dependent, Leonard garden lamp, wall mounted

Downlight frame 60 cm

3D parametric, resolution dependent, Leonard garden lamp, wall mounted, hanging

BTICINO

3D parametric, resolution dependent, Leonard, medium garden standing lamp

3D parametric, resolution dependent, Leonard garden standing lamp, with 3 head

#http://www.idobathroom.com www.bimlab.fi changelog 15.06.2006 -initial release 1.9.2008 -added to Seven D

Family name STEP wall recessed lighting fixture bollard lighting fixture

Just a lamp I made :) Rememger to set illuminating surfaces (in photorendering settings) to a suitable value. It might be an idea to set a general light with no shadowcasting below if you want more light

Family name COLUMN Bollard lighting fixture

3D parametric, resolution dependent, wrought iron garden lamp, wall mounted, hanging

Family name BLITZ Wall mounted lighting fixture

arco di flos https://flos.com/it

Light Pole By Paulo H. Santos, arq.º phsantos.arq@clix.pt AGO 2008 Made in Portugal3D parametric, street lamp post\n- with optional one or two lamps

3D parametric, resolution dependent, Leonard garden lamp, wall mounted, standing

Hanging lamp industrial design www.masterscript.nl

#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D parametric traffic light with support\n- red, orange, green optinal: on / off

Family name BLINKER wall recessed lighting fixture

Family name TRIM APPLIQUE Wall mounted lighting fixture

Family name RING Ground recessed drive-over lighting fixture

3D parametric, resolution dependent, Leonard, small garden standing lamp

LUCE A SOFFITTO

Family name MOAI Bollard lighting fixture

3D parametric, resolution dependent, garden lamp, wall mounted, hanging

Family name PARK Post top / Pole / Wall Mounted lighting fixture

Family name POOL Submersion Wall mounted lighting fixture

Family name TECHNO Projector lighting fixture

Family name ZEN Wall/Ceiling mounted lighting fixture

PULSANTI LUCI

Family name LOBBY Ceiling recessed lighting fixture

Recessed ceiling spot lamp.

Family name EOS wall recessed lighting fixture bollard lighting fixture

Family name POSTER Post top lighting fixture

BPP007 LED-MP/740 PSU II GR 60P BPP007 - LED Medium Power - Power supply unit - Posttop for diameter 60 mm Under new regulations, all mercury-based lamps are prohibited from 2015 onwards. This means that all luminaires using these lamps need to be replaced as well. However, the installed base of these luminaires is huge, and the municipalities do not have the budget for such largescale replacement, especially in this period of economic austerity. At the same time, the municipal authorities are facing tremendous pressure to save energy and to reduce light pollution of the night sky (many mercury installations have a transparent bowl, sending light everywhere).StreetSaver is an affordable, high-quality solution that enables the municipalities to address all these issues at once by changing their mercury- based luminaires to a LED system – for only limited investment.

Family name POOL SPOT Submersion Surface lighting fixture

Family name TRIM BOLLARD Bollard lighting fixture

THE SIZE OF THIS LAMP IS FIXED TOTAL LENGTH AND WIDTH CONTROLS CAN NOT BE USED

Family name AVENUE Post top lighting fixture

50er Jahre Lampe

Single, double, triple or four-tined street lamp.

Recessed ceiling spot lamp.

http://www.cateonline.fr GDLobjects by al_design copyright Architecture_AL 2013 design by al_d 2003 script by Lup & al

3D parametric, resolution dependent, Leonard, large garden standing lamp

3D parametric, resolution dependent, wrought iron garden lamp, wall mounted, standing

Family name MOVIT Projector lighting fixture

Valoa säteilevä loistava objekti, joka voidaan näyttää tai piilottaa renderoinnissa.

presa

THE SIZE OF THIS LAMP IS FIXED TOTAL LENGTH AND WIDTH CONTROLS CAN NOT BE USED

3D parametric, resolution dependent, garden standing lamp

2D Lamp symbol

lampada da terra TOIO di flos - https://flos.com/it/prodotti/lampade-terra/toio/toio/

Recessed ceiling spot lamp.

Fluorescent wall lamp.

THE SIZE OF THIS LAMP IS FIXED TOTAL LENGTH AND WIDTH CONTROLS CAN NOT BE USED

THE SIZE OF THIS LAMP IS FIXED TOTAL LENGTH AND WIDTH CONTROLS CAN NOT BE USED POINT LIGHT, NO SHADOW OPTION

3D parametric, resolution dependent, Leonard, XXL garden standing lamp

An object to help in the placement of lights in a room.

#http://www.idobathroom.com www.bimlab.fi changelog 01.02.2007 -initial release

Recessed halogen ceiling lamp.

THE SIZE OF THIS LAMP IS FIXED TOTAL LENGTH AND WIDTH CONTROLS CAN NOT BE USED THE LENGTH OF THE LAMPSHADE IS 1.65 M POINT LIGHT, NO SHADOW OPTION

Střední velikost vířivky Softub model Legend 220 je určen pro dvě až čtyři osoby a je skvělým kompromisem pro menší rodinu nebo pár. Oproti nejmenšímu modelu Sportster 140 má navíc větší průměr, více trysek a barevné osvětlení Color LED. Pokud budete vířivku využívat převážně ve dvou, je pro Vás model Legend 220 ideální volbou a navíc Vám umožňuje příležitostné využití s přáteli.

IES compatible light source.

#http://www.gdlfactory.fi/ --- © GDL FACTORY ----- ---- Jarkko Hoivala ------ Versio Pvm Muokannut Selite 1.0 24.06.2014 J. Hoivala Luotu Käyttäjävastuu -------------------------------- Objektin tuottaja tai tarjoaja eivät takaa objektien virheetöntä toimintaa. Objektin käyttäminen tapahtuu käyttäjän omalla vastuulla. Objekti tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

Softub Resort 300+ má o 20 cm větší průměr, než model Legend, je o 8cm vyšší, což umožňuje větší počet osob bez rozlití vody nebo "živější" využití vířivky. Model Resort 300+ má navíc na dně půlkruhový vyvýšený schod, který využijí především děti, pro které by mohl být největší model při plném obsazení hluboký. Samozřejmostí je barevné osvětlení a vyšší počet trysek oproti menším modelům. Vířivka Softub Resort 300+ pojme pohodlně 5­ 6 osob a je právem vlajkovou lodí celé nabídky vířivek Softub.

2D Washbasin lamp

2D Halogen lamp

2D Post lamp

THE SIZE OF THIS LAMP IS FIXED TOTAL LENGTH AND WIDTH CONTROLS CAN NOT BE USED POINT LIGHT, NO SHADOW OPTION

THE SIZE OF THIS LAMP IS FIXED TOTAL LENGTH AND WIDTH CONTROLS CAN NOT BE USED POINT LIGHT, NO SHADOW OPTION

Fluorescent wall lamp.

Recessed halogen ceiling lamp.

2D electric symbol with listing parameters.

2D electric symbol with listing parameters.

2D electric symbol with listing parameters.

Single, double, triple or four-tined street lamp.

2D electric symbol with listing parameters.

2D electric symbol with listing parameters.

2D electric symbol with listing parameters.

Gazprom lamp

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -change in colours 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -all new cabinets 01.09.2008 -initial release

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -change in colours 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -initial release

#http://www.idobathroom.com www.bimlab.fi

Fluorescent wall lamp.

The Leaf Lamp Tree is a tree-size standing lamp for public indoor spaces.The branches shape a magnificent crown foliage (Ø130 / Ø230 / Ø300 / Ø350 cm or custom size up to Ø600 cm for special projects). Leaf Lamp Trees stand on the ground with a robust base that can be bolted to the floor or an optional base plate that makes the tree freestanding. Leaf Lamp Tree has A-class sound-absorbing qualities – the foliage forms a soft labyrinth of 4.5 / 18 / 27 / 67.5 square metres of wool felt. It radically enhances speech perception in its proximity – and under the Leaf Lamp Tree, a whisper is as good as a shout.

The Leaf Lamp Tree is a tree-size standing lamp for public indoor spaces.The branches shape a magnificent crown foliage (Ø130 / Ø230 / Ø300 / Ø350 cm or custom size up to Ø600 cm for special projects). Leaf Lamp Trees stand on the ground with a robust base that can be bolted to the floor or an optional base plate that makes the tree freestanding. Leaf Lamp Tree has A-class sound-absorbing qualities – the foliage forms a soft labyrinth of 4.5 / 18 / 27 / 67.5 square metres of wool felt. It radically enhances speech perception in its proximity – and under the Leaf Lamp Tree, a whisper is as good as a shout.

Occasional lamp table (end table) approximately 20" high X 27" wide X 27" deep with choice of finishes (wood, oak veneer, or high pressure laminate).

Table lamp, 27-34" high X 6" wide X 6" deep with linen shade. Convenience outlet required at point of use.

An LED floor lamp for use as a reading light. The lamp design may have an articulating arm for adjusting the light just where it is needed. The lamp will use an LED light.

Dual delivery ophthalmic laser system. Unit allows rapid switching between two laser delivery systems. The unit includes safety goggles and a slit lamp or an indirect ophthalmoscope, both with high visibility safety filters.

Slit lamp with applanation tonometer. Unit consists of a base mounted ophthalmological slit lamp with head and chin rest and manual height and focusing adjustments. The instrument features a microscope head with parallel optics that will accept an applanation tonometer. Designed for use in ophthalmology during diagnostic examinations.

EFG Tab is a sound absorbing table screen characterized by a clean design and clean lines. EFG Tab gives you the opportunity to shape the workplace to suit your needs and activities. The functional toolbar with accessories will help you create a workplace where function and performance are blended with design and appearance. EFG Tab is available in fabrics in single or dual colours and contrasting stitching in a multitude of colour combinations giving you the opportunity to play with colours and shape your own workplace. The extensive EFG Tab collection is available in a variety of sizes to fit your chosen table.

The diffusers of the Beluga series, available in 4 lengths of electrical cable, are composed of transparent lead crystal spheres. The lamp runs on mains power and is suitable for use with LED.

<p></p><p>The Crio range consists of hanging lamps for indoor use, in aluminium, either painted in a matt white finish or laminated in natural light-coloured wood or dark ebony. The diffuser is in opaline PMMA (polymethyl-methacrylate). The lamp runs on mains power and is suitable for use with fluorescent bulbs and LED.</p><p></p>

The diffusers of the Tooby series, available in 4 lengths of electrical cable, are composed of cylindrical elements in borosilicate glass (Pyrex®) and a cap with an anodised finish, with a ribbed plastic cylindrical element inside to diffuse the light evenly along the entire tube. The lamp runs on mains power and is suitable for use with LED.

The Polair diffusers come in 4 electric cable lengths, and are composed of borosilicate (Pyrex®) glass cylindrical elements, with a sandblasted base, and have a cap with an opaque black finish. The lamp runs on mains power and is suitable for use with LED.

The pendant lamp is designed for indoor use, and are available in white, dark grey or light grey aluminium, the light is directed through the light bars. The lamp runs on mains power and is suitable for use with LED.

The floor lamp is designed for indoor use, and are available in white, dark grey or light grey aluminium, the light is directed through the light bars. The lamp, which has a built-in dimmer switch, runs on mains power and is suitable for use with LED.

The wall and ceiling lamp is designed for indoor use, and are available in white, dark grey or light grey aluminium, the light is directed through the light bars. For this lamp the energy voltage is low (24V dc, LED) and comes with a remote power pack.

The wall and ceiling lamp is designed for indoor use, and are available in white, dark grey or light grey aluminium, the light is directed through the light bars. For this lamp the energy voltage is low (24V dc, LED) and comes with a remote power pack.

The wall and ceiling lamp is designed for indoor use, and are available in white, dark grey or light grey aluminium, the light is directed through the light bars. For this lamp the energy voltage is low (24V dc, LED) and comes with a remote power pack.

Olympic is a round white painted aluminium hanging light collection, with the LED light source located on the outer ring. Both direct and indirect light diffusion. The hanging lights are available in different diameters, and in single or multiple layouts. The peculiarity of these lamps is the possibility to intertwine them, creating original shapes and compositions, also thanks to the easy cable length adjustment.

Olympic is a round white painted aluminium hanging light collection, with the LED light source located on the outer ring. Both direct and indirect light diffusion. The hanging lights are available in different diameters, and in single or multiple layouts. The peculiarity of these lamps is the possibility to intertwine them, creating original shapes and compositions, also thanks to the easy cable length adjustment.

Olympic is a round white painted aluminium hanging light collection, with the LED light source located on the outer ring. Both direct and indirect light diffusion. The hanging lights are available in different diameters, and in single or multiple layouts. The peculiarity of these lamps is the possibility to intertwine them, creating original shapes and compositions, also thanks to the easy cable length adjustment.

Olympic is a round white painted aluminium hanging light collection, with the LED light source located on the outer ring. Both direct and indirect light diffusion. The hanging lights are available in different diameters, and in single or multiple layouts. The peculiarity of these lamps is the possibility to intertwine them, creating original shapes and compositions, also thanks to the easy cable length adjustment.

Olympic is a round white painted aluminium hanging light collection, with the LED light source located on the outer ring. Both direct and indirect light diffusion. The hanging lights are available in different diameters, and in single or multiple layouts. The peculiarity of these lamps is the possibility to intertwine them, creating original shapes and compositions, also thanks to the easy cable length adjustment.

The Crio range consists of hanging lamps for indoor use, in aluminium, either painted in a matt white finish or laminated in natural light-coloured wood or dark ebony. The diffuser is in opaline PMMA (polymethyl-methacrylate). The lamp runs on mains power and is suitable for use with fluorescent bulbs and LED.

The Crio range consists of hanging lamps for indoor use, in aluminium, either painted in a matt white finish or laminated in natural light-coloured wood or dark ebony. The diffuser is in opaline PMMA (polymethyl-methacrylate). The lamp runs on mains power and is suitable for use with fluorescent bulbs and LED.

<p>Hanging lamp with built-in LED, 43W - 4800Lumen. Dimmable driver included in the structure. Reflected light. Structure available in different colours: white, black, gold foil, silver foil. Other structure colours are possible on request. LED light available in 2700K, 3000K, 4000K. </p>

<p>The collection Real is a series of ceiling and wall lights, the result of our desire to create a highly innovative refined product with a simple original form. Due to its design and indirect light, it can be used in many different enviroments.<br>Device for indirect light.</p>

Wall / ceiling lamp with built-in LED, 2,2W - 250 Lumen. Driver included in the structure. Structure available in different colours: white, french gold, steel finishing. Other structure colours are possible on request. The Plexiglas shades enhance the beauty of the light and feature a strippled pattern which improves light diffusion, ensuring high luminosity.

Wall / ceiling lamp with built-in LED, 3,2W - 350 Lumen. Driver included in the structure. Structure available in different colours: white, french gold, steel finishing. Other structure colours are possible on request. The Plexiglas shades enhance the beauty of the light and feature a strippled pattern which improves light diffusion, ensuring high luminosity.

Ceiling lamp with built-in LED, 6,3W - 800 Lumen. Dimmable driver included in the structure. Structure available in different colours: white, french gold, steel finishing. Other structure colours are possible on request. The Plexiglas shades enhance the beauty of the light and feature a strippled pattern which improves light diffusion, ensuring high luminosity.

Ceiling lamp with built-in LED, 20W - 2650 Lumen. Dimmable driver included in the structure. Structure available in different colours: white, french gold, steel finishing. Other structure colours are possible on request. The Plexiglas shades enhance the beauty of the light and feature a strippled pattern which improves light diffusion, ensuring high luminosity.

Hanging lamp with built-in LED, 6,3W - 800 Lumen. Dimmable driver included in the structure. Structure available in different colours: white, french gold, steel finishing. Other structure colours are possible on request. The Plexiglas shades enhance the beauty of the light and feature a strippled pattern which improves light diffusion, ensuring high luminosity. LED light available in 2700K, 3000K, 4000K.

Hanging lamp with built-in LED, 20W - 2650 Lumen. Dimmable driver included in the structure. Structure available in different colours: white, french gold, steel finishing. Other structure colours are possible on request. The Plexiglas shades enhance the beauty of the light and feature a strippled pattern which improves light diffusion, ensuring high luminosity.

Hanging lamp with built-in LED, 28W - 3850 Lumen. Dimmable driver included in the structure. Structure available in different colours: white, french gold, steel finishing. Other structure colours are possible on request. The Plexiglas shades enhance the beauty of the light and feature a strippled pattern which improves light diffusion, ensuring high luminosity.

Plafoniera a led integrati, 28W - 3850 Lumen. Trasformatore dimmerabile incluso nella struttura. La struttura è disponibile in diverse finiture: bianco, oro francese, finitura acciaio. Altre finiture sono disponibili su richiesta. Il diffusore in plexiglas è particolarmente luminoso grazie alla micro-puntinatura interna che permette una maggiore diffuzione della luce.

Wall / ceiling lamp with built-in LED, 6W - 880 Lumen. Dimmable driver included in the structure. Structure available in different colours: white, french gold, steel finishing. Other structure colours are possible on request. Lens availaible in 25° e 42°.

Wall / ceiling lamp with built-in LED, 2x6W - 2x880 Lumen. Dimmable driver included in the structure. Structure available in different colours: white, french gold, steel finishing. Other structure colours are possible on request. Lens availaible in 25° e 42°.

Wall / ceiling lamp with built-in LED, 3x6W - 3x880 Lumen. Dimmable driver included in the structure. Structure available in different colours: white, french gold, steel finishing. Other structure colours are possible on request. Lens availaible in 25° e 42°.

Wall / ceiling lamp with built-in LED, 4x6W - 4x880 Lumen. Dimmable driver included in the structure. Structure available in different colours: white, french gold, steel finishing. Other structure colours are possible on request. Lens availaible in 25° e 42°.

Wall / ceiling lamp with built-in LED, 5x6W - 5x880 Lumen. Dimmable driver included in the structure. Structure available in different colours: white, french gold, steel finishing. Other structure colours are possible on request. Lens availaible in 25° e 42°.

Wall / ceiling lamp with built-in LED, 7W - 980 Lumen. Dimmable driver included in the structure. Reflected light. Structure available in different colours: white, french gold, steel finishing, brown. Other structure colours are possible on request. Reflecting surface in glass. Glass available in: white, silver foil, gold foil.

Wall / ceiling lamp with built-in LED, 11,7W - 1860 Lumen. Dimmable driver included in the structure. Reflected light. Structure available in different colours: white, french gold, steel finishing, brown. Other structure colours are possible on request. Reflecting surface in glass. Glass available in: white, silver foil, gold foil.

Hanging lamp with built-in LED, 22,7W up / 23,5W down - 2300Lumen up / 2700Lumen down. Dimmable driver included in the structure. Direct and reflected light. Structure available in different colours: white, black, gold foil, silver foil. Other structure colours are possible on request.

Wall lamp with built-in LED, 4,8W + 1,6 W - 680 + 220 Lumen. Dimmable driver included in the structure. Direct and reflected light. Structure available in different colours: white, black, gold foil, silver foil. Other structure colours are possible on request.

Wall lamp with built-in LED, 9,7W + 3,2 W - 1360 + 440 Lumen. Dimmable driver included in the structure. Direct and reflected light. Structure available in different colours: white, black, gold foil, silver foil. Other structure colours are possible on request. LED light available in 2700K, 3000K, 4000K.

Table lamp with built-in LED, 15W - 1640 Lumen. Dimmable driver included in the structure. Direct and reflected light. Structure available in different colours: white, black, gold foil, silver foil. Other structure colours are possible on request.

Hanging lamp with built-in LED, 34W - 4100 Lumen. Dimmable driver included in the structure. Structure available in different colours: white, french gold, steel finishing. Other structure colours are possible on request. The Plexiglas shades enhance the beauty of the light and feature a strippled pattern which improves light diffusion, ensuring high luminosity.

Hanging lamp with built-in LED, 46W - 5600 Lumen. Dimmable driver included in the structure. Structure available in different colours: white, french gold, steel finishing. Other structure colours are possible on request. The Plexiglas shades enhance the beauty of the light and feature a strippled pattern which improves light diffusion, ensuring high luminosity.

Wall lamp with built-in LED, 17W + 3W - 1800+450 Lumen. Dimmable driver included in the structure, it is possible to have the double lighting: branches and spotlight separately. Structure available in white. Other structure colours are possible on request. The Plexiglas shades enhance the beauty of the light and feature a strippled pattern which improves light diffusion, ensuring high luminosity. Branches are dismantled for better packaging.

Chandelier with built-in LED, 57,6W + 6W - 6300+880 Lumen. Dimmable driver included in the structure, it is possible to have the double lighting: branches and spotlight separately. Structure available in white. Other structure colours are possible on request. The Plexiglas shades enhance the beauty of the light and feature a strippled pattern which improves light diffusion, ensuring high luminosity. The sphere is made of glass. Branches are dismantled for better packaging.

Chandelier with built-in LED, 92W+ 6W - 10.000+880 Lumen. Dimmable driver included in the structure, it is possible to have the double lighting: branches and spotlight separately. Structure available in white. Other structure colours are possible on request. The Plexiglas shades enhance the beauty of the light and feature a strippled pattern which improves light diffusion, ensuring high luminosity. The sphere is made of glass. Branches are dismantled for better packaging.

Ceiling lamp with built-in LED, 38W - 5200 Lumen. Dimmable driver included in the structure. Reflected light. Structure available in different colours: white, french gold, steel finishing. Other structure colours are possible on request.

Ceiling lamp with built-in LED, 50W - 7200 Lumen. Dimmable driver included in the structure. Reflected light. Structure available in different colours: white, french gold, steel finishing. Other structure colours are possible on request.

Auto - Licht

Garden Lamp

Garden Lamp

Lamp SPot Fitting

Floor Lamp 60 cm

Światło punktowe o zmiennym kierunku i kącie snopu.

#http://www.gdlfactory.fi/ --- © GDL FACTORY ----- ---- Jarkko Hoivala ------ Versio Pvm Muokannut Selite 1.0 24.06.2014 J. Hoivala Luotu Käyttäjävastuu -------------------------------- Objektin tuottaja tai tarjoaja eivät takaa objektien virheetöntä toimintaa. Objektin käyttäminen tapahtuu käyttäjän omalla vastuulla. Objekti tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.gdlfactory.fi/ --- © GDL FACTORY ----- ---- Jarkko Hoivala ------ Versio Pvm Muokannut Selite 1.0 24.06.2014 J. Hoivala Luotu Käyttäjävastuu -------------------------------- Objektin tuottaja tai tarjoaja eivät takaa objektien virheetöntä toimintaa. Objektin käyttäminen tapahtuu käyttäjän omalla vastuulla. Objekti tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.gdlfactory.fi/ --- © GDL FACTORY ----- ---- Jarkko Hoivala ------ Versio Pvm Muokannut Selite 1.0 24.06.2014 J. Hoivala Luotu Käyttäjävastuu -------------------------------- Objektin tuottaja tai tarjoaja eivät takaa objektien virheetöntä toimintaa. Objektin käyttäminen tapahtuu käyttäjän omalla vastuulla. Objekti tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

generelle allgemeine Lichtquelle..

3D parametric, resolution dependent, wrought iron garden lamp, standing

Length and Width parameters are not used Diameter of Lamp : 240 mm

Length and Width parameters are not used Height of Lamp : 440 mm

#http://www.idobathroom.com www.bimlab.fi changelog 01.03.2005 -renamed furniture series 01.03.2005 -modifications for skandinavian and russian market 01.10.2003 -3D material for lamp 01.03.2003 -initial release

Fluorescent wall lamp.

2D floor spot lamp

Recessed halogen ceiling lamp.

Ceiling Mount Points 3 pcs M3 x 5 depth Power requirements 3.0-1.3A, 100-240V, 50-60Hz Conformances CE, FCC Class A, cCSAus Operating temperature 0 - 40°C Operating humidity 20-80% RH Storage conditions 10-90% RH Available colour Black, White Warranty 3 years standard warranty, 500 hours or 90 days on lamp (whichever comes first) Optional 2 years, 24/7 operation warranty. Conditions apply

Dental operating light designed to be cabinet mounted. Unit has an auto on/off function with chair preset movements, three position or variable intensity and third axis of rotation for precise light head positioning. Light has a quartz halogen lamp.

Binocular microscope. Equipped with plan achromatic objectives to suit work in brightfield, phase contrast, darkfield, photomicrography, dual viewing and projection screen. Microscope has a high light intensity, 100 watt halogen lamp, for constant color temperature and illumination, a three step variable transformer, focusable aspheric abbe condenser system; heat absorbing glass; centerable field diaphragm; two built-in filter turrets permitting a combination of selective light balancing and color compensating filters. Other components/features include a swing-in condenser, 4X objective, quadruple nosepiece, 10X wide field eyepieces and a graduated stage. Other observation tubes can be added. It is used in laboratories for cell counting and other observation techniques.

Binocular laboratory microscope. Characteristics include a 6V, 20W tungsten halogen lamp, quadruple revolving nosepiece, a binocular body, un-graduated mechanical stage, 4X,10X,40X and 100X plan achromatic objectives. Unit has a 1.25 condenser with mount, an auxiliary swing-in condenser, two (10X) widefield eyepieces, dual diopter adjustment and may include a carrying case. Used in the laboratory to perform observations on laboratory cultures and samples. Microscope to be provided with appropriate light source and filters for phase contrast microscopy.

Co-oximeter analyzer. The unit calculates hemoglobin/oxygenation concentrations. The analyzer characteristics/components include a sample readout in no longer than 45 seconds, dual beam optics and a hollow cathode lamp. It is used to calculate oxygen content, capacity, and measured saturation and correlates closely with reference methods.

Bio safety cabinet, Class II, Type A1. This is a vertical freestanding unit with a face velocity of 100 fpm, constructed of type 304 stainless steel. The inside walls have a high velocity air return. The unit utilizes 70% air recirculation 30% exhaust either into room or through to the outside. It requires HEPA and includes a removable work tray, built-in drain valve, two valve penetrations with blanking plugs, duplex outlet and a fluorescent lamp. Used for low to moderate risk biological agents with the absence of volatile toxic chemicals and radionuclides. 4 foot model, other sizes available.

Gross pathology station. The unit contains four, two-speed electronic fans to reduce the danger of formaldehyde toxicity, an exhaust system with filters that last 2 to 8 months to convert the formaldehyde to CO2 and water, built in fluorescent lamps for shadow-free illumination, a "voice capturing option" to allow the pathologist to dictate without having to fumble with a hand or foot control and a built-in faucet with catch pan in the rear. Used for gross preparation of pathology specimens.

The ophthalmic refraction desk shall be specifically designed to conduct eye examinations in ophthalmic clinics and hospital. It shall have a control console consisting of three rechargeable instrument wells, two 110v auxiliary switches to control accessories, two low voltage switches to control fixation lights, a separate on/off dimmer control for room lights and an indirect ophthalmoscope control with hanger that provides power to the instrument when lifted. This item may include an optional equipment stand/pole with one to three arms and the ability to accept a phoropter arm. There shall be a swivel Lamp and a trial lens drawer.

Ophthalmic adjustable instrument table. Four toed pedestal type base with foot pedal brake or hand operated clamp for securing table adjustment. Designed for use with slit lamp, ophthalmometer, perimeter and screening instruments.

Lensometer. Unit includes lamps, prism measuring lens marking device, cylinder axis wheel calibrated in two 180 degree segments and a green filter for tinted glass. The instrument may be inclined between 25 to 90 degrees. Used for measuring lens.

Binocular indirect ophthalmoscope. Unit consists of headband and crown, halogen quartz lamp, multi-coated aspherical lenses, scleral depressor and mirror. It also includes a control switch that regulates the illumination from 2 to 6 volts. Used to examine presence of blood vessels in patient's pupils.

Ophthalmic radiuscope. Unit consists of a fine compound microscope with concentric coarse and fine focusing adjustments. It includes a 6.5 V lamp, monochromatic filter, two lens mount and a built-in variable voltage selector. For contact lenses measuring and inspection.

Lantern for color perception testing. The unit is also known as a Farnsworth Lantern. The lantern comes complete with a carrying case, spare lamp and color plates. Used for detecting defective color vision.

X-ray film illuminator approximately 20' H x 29' W x 6'' D. This is a double, wall mounted type unit with a continuous viewing surface. The tension film grips are adjustable top and bottom with standard grip strip. The unit's balanced-light viewing is assured by the 32W circular fluorescent lamp. It provides 500 feet candles of cool operation across the entire 14" X 17" viewing surface. It is available with or without film-activated switch. The unit can be used in hospitals, examining rooms, satellite office or lab.

Film illuminator, 4 panels, wall mounted. This unit is designed for simple on the wall installation. It has a front-mounted switch for independent control of fluorescent lamps. The unit is used to review and analyze radiography film in hospitals and X-ray clinics.

Wall mounted examination light. Unit features high intensity color-corrected lighting, a tungsten halogen lamp and a supporting arm with minimum reach of 45 inches. Physical dimensions refer to the retracted light; one length of the dual swing arm from the wall mount in width and depth and the combined height of the lamp head and folded arms. See manufacturer's requirements for screws and pull-out strengths for mounting. Unit may also have a center mount detachable and sterilizable control handle. The unit is used in clinical treatment rooms and hospital rooms.

Ceiling mounted surgical light. Consists of a single lamp head up to 24" in diameter depending on the manufacturer. Unit provides heat filtered, color corrected light. Most lights require a minimum ceiling height of 8 feet 2 inches; check manufacturers' specific recommendations. Light head is in a movable yoke attached to a column hanging from the ceiling. For minor surgery and obstetrical procedures. Physical dimensions refer to the retracted light; one length of the dual swing arm around the center mount for width and depth and the height is the combined lamp head and folded arms height.

Ceiling mounted surgical light generally 30-34" or larger in diameter depending on manufacturer. Light head is suspended from the ceiling by a mounting plate and pole. Light head contains several individual pods each with its own light source. Unit also has a detachable sterilizable handle. Minimum ceiling height for most models is 8'-9"; check the manufacturers' specific recommendations. Height dimension below refers to the height of the lamp housing. Width and depth are the length of the swing arm plus the light head diameter. This light is suitable for dual site surgery.

Dual head surgical light mounted from a single pole. Both heads are of equal size and hang from individual swing arms. Each light head contains several light sources, an intensity control and a detachable, sterilizable handle. The minimum required ceiling height for most models is 9'-2"; refer to the manufacturers' specifications. The database height dimension below refers to the height of the lamp heads themselves. Width and depth are the sum of the swing arm length and lamp head diameter. This light is for use in major and minor surgical procedures.

Dual head surgical light ceiling mounted from a single pole. Unit has two lamp heads of differing sizes mounted on individual swing arms. Unit features multiple lighting pods in each lamp head, deep cavity illumination, color-corrected light, intensity control and sterilizable handles. Refer to the manufacturers' specifications for minimum ceiling heights and installation data. The database height dimension below refers to the height of the lamp head itself. The width and depth measurements are the larger of the two sums of the swing arm length and the head diameter. For use in general purpose surgical suites.

Ultraviolet treatment booth which uses a combination of UVA and UVB light. Unit consists of a full body cabinet constructed with seven aluminum panels, magnetic door and a viewing window. The interior consists of wall reflector panels, hand rails, a padded floor, screen protection for lamps and a ventilation system. The unit also features dual exposure controls for managing exposure time and UVA and UVB measuring devices. The unit is used in dermatology for UV body treatment.

High flexibility can be considered one of the main plus of SLOT. Able to ensure functional lighting with excellent light output, SLOT also allow to create more or less marked light accents suitable for variuos applications. The UP-DOWN versions house two lamps, each one with its own adjustable reflector and independent control gear.

LINEAR FRAME is a linear fitting for façade lighting effects; it provides soft illumination with a wide and uniform distribution. It can be supplied with Fluorescent lamp or LED light sources. The minimalist shape of LINEAR FRAME blends into the building without interfering with the architecture.

LINEAR is a range of walk-over luminaires developed for elegant grazing light effects. LINEAR is perfect to underline paths and building façades. The minimalist design and shallow recessing depth allow for discrete installation in narrow niches. MINILINEAR and LINEAR WALK OVER are supplied with fluorescent lamps with asymmetric optic and ACCENT LEDs.

High flexibility can be considered one of the main plus of SLOT. Able to ensure functional lighting with excellent light output, SLOT also allow to create more or less marked light accents suitable for variuos applications. The UP-DOWN versions house two lamps, each one with its own adjustable reflector and independent control gear.

Alma light is a spanish company specialized in the design and development of indoor lighting. Lighting lamps with own style and personality.

Alma light is a spanish company specialized in the design and development of indoor lighting. Lighting lamps with own style and personality.

21.1 is a single 21 pendant hung from a round canopy. The pendant is designed to hang either alone or with a clustering of 21.1 chandeliers. Solitary pendants can be used to highlight areas of a room, or in random groupings form an ambient chandelier. Inspired by the sporadic, perhaps discordant arrangement of barnacles on a rock surface, the 21 is fabricated from thin sheets of porcelain wrapped around frosted borosilicate glass trumpet-shaped diffusers. Each diffuser houses a low voltage (12V, 20W xenon) lamp. A strong contrast is established between the organically distributed soft light passing through the translucent white porcelain skin and the sharp, crisp light passing through the borosilicate glass diffuser.

16 is formed by sequentially pouring three separate layers of molten glass – in varying opacities – on a horizontal plane. Each layer responds to the indeterminate shape of the previous pour to create a uniquely layered whole. Two of these pieces are then attached and illuminated with an internal LED lamp.

Pin – bathroom lighting with genuine character Pin was designed by Matti Klenell in 2009 as a modern and more charismatic version of the classic, globe-shaped bathroom lamp. The conventional porcelain wall fitting has been replaced by an angled glass neck that gives the impression of a lamp that is growing out from the wall. The opaque glass cleverly conceals all the lamp’s electrical components, transforming Pin into a wall decoration at the same time as it provides pleasant lighting in the bathroom. In 2010 Matti Klenell’s design for Örsjö Lighting was named “Bathroom Product of the Year” by Elle Decoration in recognition of its outstanding form and function.

High-class LED ring luminaire direct/indirect with a seamlessly welded lamp housing in a compact design made of steel sheet. Fitting via cable suspension with max. length 2000 mm, continuously adjustable via quick release. Ring 64mm high, 54mm wide. Diameter 760mm / 1040mm / 1220mm and 1360mm. Equal light spread direct/indirect 1:1. Light control via satined diffuser made of PMMA for an almost homogenous light emission. Direct/indirect diffuser with 8mm height for lateral light emission. Equipped with LEDs of latest generation. Colour rendering index Ra>80. Close colour tolerance MacAdam 3. Ready for connection via 3 or 5 pin, transparent supply and ceiling canopy. Position of canopy optional lateral or central. All versions are delivered with a white canopy RAL9016.

High-class LED luminaire designed for surface mounting, with round lamp housing in a flat design made of seamlessly welded, powder-coated extruded aluminium. Available in silver RAL9006 or white RAL9016 fine matte finish. Base plate made of steel sheet for holding the LED boards and the electronics. Electrical connection through 3 or 5-pin connection terminal. Light emission through a diffuser made of satined PMMA for an almost homogeneous emission of light or a satined PMMA microprism for reduced brightness (LRA). Luminaire equipped with the latest generation of LED boards, colour rendering index Ra > 80, small colour tolerance MacAdam 3. Luminaire available in 5 sizes, 2 power outputs (HO/LO) and 2 colour temperatures (3000K/4000K). Available option: dynamic white.

High-class LED luminaire designed for direct-indirect light emission and surface mounting, with round lamp housing in a flat design made of seamlessly welded, powder-coated extruded aluminium. Available in silver RAL9006 or white RAL9016 fine matte finish. Base plate made of steel sheet for holding the LED boards and the electronics. Electrical connection through 3 or 5-pin connection terminal. Indirect emission of light through separate LED boards. Indirect emission of light from 10 to 25%, depending on the size of the luminaire and the power output. Direct light emission through a diffuser made of satined PMMA for an almost homogeneous emission of light or a satined PMMA microprism for reduced brightness (LRA). Indirect light emission through a diffuser made of satined PMMA. Luminaire equipped with the latest generation of LED boards, colour rendering index Ra > 80, small colour tolerance MacAdam 3. Luminaire available in 4 sizes, 2 power outputs (HO/LO) and 2 colour temperatures (3000K/4000K).

High-class pendant LED luminaire, with round lamp housing in a flat design made of seamlessly welded, powder-coated extruded aluminium. Available in silver RAL9006 or white RAL9016 fine matte finish. Base plate made of steel sheet for holding the LED boards and the electronics. Mounting by suspension cables (max. length 2000mm), infinitely adjustable with quick release. Electrical connection through 3 or 5-pin transparent power supply cable and ceiling housing. Light emission through a diffuser made of satined PMMA for an almost homogeneous emission of light or a satined PMMA microprism for reduced brightness (LRA). Luminaire equipped with the latest generation of LED boards, colour rendering index Ra > 80, small colour tolerance MacAdam 3. Luminaire available in 5 sizes, 2 power outputs (HO/LO) and 2 colour temperatures (3000K/4000K). Available option: dynamic white

High-class pendant LED luminaire designed for direct-indirect light emission, with round lamp housing in a flat design made of seamlessly welded, powder-coated extruded aluminium. Available in silver RAL9006 or white RAL9016 fine matte finish. Base plate made of steel sheet for holding the LED boards and the electronics. Mounting by suspension cables (max. length 2000mm), infinitely adjustable with quick release. Electrical connection through 3 or 5-pin transparent power supply cable and ceiling housing. Indirect light emission through separate LED boards. Indirect light emission from 10 to 25%, depending on the size of the luminaire and the power output. Direct light emission through a diffuser made of satined PMMA for an almost homogeneous emission of light or a satined PMMA microprism for reduced brightness (LRA). Indirect light emission through a diffuser made of satined PMMA. Luminaire equipped with the latest generation of LED boards, colour rendering index Ra > 80, small colour tolerance MacAdam 3. Luminaire available in 4 sizes, 2 power outputs (HO/LO) and 2 colour temperatures (3000K/4000K).

High-class recessed LED luminaire, with subtle round frame, made of seamlessly welded, powder-coated extruded aluminium. Lamp housing with special plates for easy recessed mounting in false ceilings from 2 to 30mm thick. Available in silver RAL9006 or white RAL9016 fine matte finish. Base plate made of steel sheet for holding the LED boards and the electronics. Electrical connection through 3 or 5-pin connection terminal. Light emission through a diffuser made of satined PMMA for an almost homogeneous emission of light or a satined PMMA microprism for reduced brightness (LRA). Luminaire equipped with the latest generation of LED boards, colour rendering index Ra > 80, small colour tolerance MacAdam 3. Luminaire available in 6 sizes, 2 power outputs (HO/LO) and 2 colour temperatures (3000K/4000K). Available option: dynamic white.

High-class LED ring luminaire direct/indirect with a seamlessly welded lamp housing in a compact design made of steel sheet. Fitting via cable suspension with max. length 2000 mm, continuously adjustable via quick release. Ring 64mm high, 54mm wide. Diameter 760mm / 1040mm / 1220mm and 1360mm. Equal light spread direct/indirect 1:1. Light control via satined diffuser made of PMMA for an almost homogenous light emission. Direct/indirect diffuser with 8mm height for lateral light emission. Equipped with LEDs of latest generation. Colour rendering index Ra>80. Close colour tolerance MacAdam 3. Ready for connection via 3 or 5 pin, transparent supply and ceiling canopy. Position of canopy optional lateral or central. All versions are delivered with a white canopy RAL9016.

High-class pendant LED luminaire, with round lamp housing in a flat design made of seamlessly welded, powder-coated extruded aluminium. Available in silver RAL9006 or white RAL9016 fine matte finish. Base plate made of steel sheet for holding the LED boards and the electronics. Mounting by suspension cables (max. length 2000mm), infinitely adjustable with quick release. Electrical connection through 3 or 5-pin transparent power supply cable and ceiling housing. Light emission through a diffuser made of satined PMMA for an almost homogeneous emission of light or a satined PMMA microprism for reduced brightness (LRA). Luminaire equipped with the latest generation of LED boards, colour rendering index Ra > 80, small colour tolerance MacAdam 3. Luminaire available in 5 sizes, 2 power outputs (HO/LO) and 2 colour temperatures (3000K/4000K). Available option: dynamic white

High-class pendant LED luminaire designed for direct-indirect light emission, with round lamp housing in a flat design made of seamlessly welded, powder-coated extruded aluminium. Available in silver RAL9006 or white RAL9016 fine matte finish. Base plate made of steel sheet for holding the LED boards and the electronics. Mounting by suspension cables (max. length 2000mm), infinitely adjustable with quick release. Electrical connection through 3 or 5-pin transparent power supply cable and ceiling housing. Indirect light emission through separate LED boards. Indirect light emission from 10 to 25%, depending on the size of the luminaire and the power output. Direct light emission through a diffuser made of satined PMMA for an almost homogeneous emission of light or a satined PMMA microprism for reduced brightness (LRA). Indirect light emission through a diffuser made of satined PMMA. Luminaire equipped with the latest generation of LED boards, colour rendering index Ra > 80, small colour tolerance MacAdam 3. Luminaire available in 4 sizes, 2 power outputs (HO/LO) and 2 colour temperatures (3000K/4000K).

High-class LED luminaire designed for surface mounting, with round lamp housing in a flat design made of seamlessly welded, powder-coated extruded aluminium. Available in silver RAL9006 or white RAL9016 fine matte finish. Base plate made of steel sheet for holding the LED boards and the electronics. Electrical connection through 3 or 5-pin connection terminal. Light emission through a diffuser made of satined PMMA for an almost homogeneous emission of light or a satined PMMA microprism for reduced brightness (LRA). Luminaire equipped with the latest generation of LED boards, colour rendering index Ra > 80, small colour tolerance MacAdam 3. Luminaire available in 5 sizes, 2 power outputs (HO/LO) and 2 colour temperatures (3000K/4000K). Available option: dynamic white.

High-class LED luminaire designed for direct-indirect light emission and surface mounting, with round lamp housing in a flat design made of seamlessly welded, powder-coated extruded aluminium. Available in silver RAL9006 or white RAL9016 fine matte finish. Base plate made of steel sheet for holding the LED boards and the electronics. Electrical connection through 3 or 5-pin connection terminal. Indirect emission of light through separate LED boards. Indirect emission of light from 10 to 25%, depending on the size of the luminaire and the power output. Direct light emission through a diffuser made of satined PMMA for an almost homogeneous emission of light or a satined PMMA microprism for reduced brightness (LRA). Indirect light emission through a diffuser made of satined PMMA. Luminaire equipped with the latest generation of LED boards, colour rendering index Ra > 80, small colour tolerance MacAdam 3. Luminaire available in 4 sizes, 2 power outputs (HO/LO) and 2 colour temperatures (3000K/4000K).

High-class recessed LED luminaire, with subtle round frame, made of seamlessly welded, powder-coated extruded aluminium. Lamp housing with special plates for easy recessed mounting in false ceilings from 2 to 30mm thick. Available in silver RAL9006 or white RAL9016 fine matte finish. Base plate made of steel sheet for holding the LED boards and the electronics. Electrical connection through 3 or 5-pin connection terminal. Light emission through a diffuser made of satined PMMA for an almost homogeneous emission of light or a satined PMMA microprism for reduced brightness (LRA). Luminaire equipped with the latest generation of LED boards, colour rendering index Ra > 80, small colour tolerance MacAdam 3. Luminaire available in 6 sizes, 2 power outputs (HO/LO) and 2 colour temperatures (3000K/4000K). Available option: dynamic white.

Rectangular body with raised edges consisting of a polycarbonate housing and diffuser of the same material. Consists of a LED lamp that switches on if the power supply fails. Mounting Options: [LIST] Hydra surface Hydra semi-recessed (KSH/KSP) Hydra ceiling flush-mounted (KET) Hydra wall flush-mounted (KEP) Hydra pennant (KET+ KSB) Hydra watertight (KES) [/LIST]

Rectangular body with raised edges consisting of a polycarbonate housing and diffuser of the same material. Consists of a LED lamp that switches on if the power supply fails. Mounting Options: [LIST] Hydra surface Hydra semi-recessed (KSH/KSP) Hydra ceiling flush-mounted (KET) Hydra wall flush-mounted (KEP) Hydra pennant (KET+ KSB) Hydra watertight (KES) [/LIST]

Rectangular body with raised edges consisting of a polycarbonate housing and diffuser of the same material. Consists of a LED lamp that switches on if the power supply fails. Mounting Options: [LIST] Hydra surface Hydra semi-recessed (KSH/KSP) Hydra ceiling flush-mounted (KET) Hydra wall flush-mounted (KEP) Hydra pennant (KET+ KSB) Hydra watertight (KES) [/LIST]

Rectangular body with raised edges consisting of a polycarbonate housing and diffuser of the same material. Consists of a LED lamp that switches on if the power supply fails. Mounting Options: [LIST] Hydra surface Hydra semi-recessed (KSH/KSP) Hydra ceiling flush-mounted (KET) Hydra wall flush-mounted (KEP) Hydra pennant (KET+ KSB) Hydra watertight (KES) [/LIST]

Rectangular body with raised edges consisting of a polycarbonate housing and diffuser of the same material. Consists of a LED lamp that switches on if the power supply fails. Mounting Options: [LIST] Hydra surface Hydra semi-recessed (KSH/KSP) Hydra ceiling flush-mounted (KET) Hydra wall flush-mounted (KEP) Hydra pennant (KET+ KSB) Hydra watertight (KES) [/LIST]

Rectangular body with raised edges consisting of a polycarbonate housing and diffuser of the same material. Consists of a LED lamp that switches on if the power supply fails. Mounting Options: [LIST] Hydra surface Hydra semi-recessed (KSH/KSP) Hydra ceiling flush-mounted (KET) Hydra wall flush-mounted (KEP) Hydra pennant (KET+ KSB) Hydra watertight (KES) [/LIST]

Rectangular body with raised edges consisting of a polycarbonate housing and diffuser of the same material. Consists of a LED lamp that switches on if the power supply fails. Mounting Options: [LIST] Hydra surface Hydra semi-recessed (KSH/KSP) Hydra ceiling flush-mounted (KET) Hydra wall flush-mounted (KEP) Hydra pennant (KET+ KSB) Hydra watertight (KES) [/LIST]

Rectangular body with raised edges consisting of a polycarbonate housing and diffuser of the same material. Consists of a LED lamp that switches on if the power supply fails. Mounting Options: [LIST] Hydra surface Hydra semi-recessed (KSH/KSP) Hydra ceiling flush-mounted (KET) Hydra wall flush-mounted (KEP) Hydra pennant (KET+ KSB) Hydra watertight (KES) [/LIST]

Rectangular body with raised edges consisting of a polycarbonate housing and diffuser of the same material. Consists of a LED lamp that switches on if the power supply fails. Mounting Options: [LIST] Hydra surface Hydra semi-recessed (KSH/KSP) Hydra ceiling flush-mounted (KET) Hydra wall flush-mounted (KEP) Hydra pennant (KET+ KSB) Hydra watertight (KES) [/LIST]

Rectangular body with raised edges consisting of a polycarbonate housing and diffuser of the same material. Consists of a LED lamp that switches on if the power supply fails. Mounting Options: [LIST] Hydra surface Hydra semi-recessed (KSH/KSP) Hydra ceiling flush-mounted (KET) Hydra wall flush-mounted (KEP) Hydra pennant (KET+ KSB) Hydra watertight (KES) [/LIST]

Rectangular body with raised edges consisting of a polycarbonate housing and diffuser of the same material. Consists of a LED lamp that switches on if the power supply fails. Mounting Options: [LIST] Hydra surface Hydra semi-recessed (KSH/KSP) Hydra ceiling flush-mounted (KET) Hydra wall flush-mounted (KEP) Hydra pennant (KET+ KSB) Hydra watertight (KES) [/LIST]

Rectangular body with raised edges consisting of a polycarbonate housing and diffuser of the same material. Consists of a LED lamp that switches on if the power supply fails. Mounting Options: [LIST] Hydra surface Hydra semi-recessed (KSH/KSP) Hydra ceiling flush-mounted (KET) Hydra wall flush-mounted (KEP) Hydra pennant (KET+ KSB) Hydra watertight (KES) [/LIST]

A ceiling spotlight, with an essential and complementary shape, plus LED source. Optical unit with convex extra clear glass lens, this for smoothing the light beam. Aluminum lacquered case with high resistance varnish: colors are available in extra matte finish, perfect for all contemporary living spaces. Bicolor finish is for optical group and lamp.

<p>Dot, available with 1, 3 or 5 light sources, is a lamp containing an innovative parabola which grants an antireflection effect and LED sources of high illumination intensity. It is an indoor luminaire made of AirCoral® and installable on ceilings which takes maximum advantage from technological research, guaranteeing the most complete customization of the form and inclination of the internal parabola. The product is available with different lens which allow the adaptation to any types of architectonic projects and necessities.</p> <p>AirCoral body<br>IP20 protection grade<br>Body dimensions 72x50x52 mm/172x50x52 mm/ 272x50x52 mm<br>COB professional LED source <br>LED colour temperature: 3000 K (on demand 2700 K - 3500 K - 4000 K - 5000K)<br>On demand: PUSH/DALI dimmable LED</p>

<p>A bright product starting from its shape, discreet and elegant, able to perfectly integrate itself inside architectures achieving extraordinary complete disappearance effects. Genius guarantees a perfect lighting in every environment is may be installed in: totally disappearing recessed luminaire for indoor spaces, made of AirCoral® and installable on plasterboard or brick ceilings, is able to emit an incredible light intensity for just a 20 mm emission hole, so tiny that it disappears when the product is turned off.</p> <p>With a simple hand gesture, the electric part can be extracted directly from the hole which allows the light to pour out. This is possible thanks to the push-pull mechanism, which makes the eventual extraction and replacement of the LED source easier in case of maintenance.</p> <p>AirCoral® body<br>IP20 protection grade<br>90° light beam inclination<br>Light emission hole Ø 20<br>Dimensions 125 x 100 x 110 mm<br>LED lamp COB professional<br>LED colour temperature: 3000K</p><p></p>

Pipedino Open is an indoor bi-emission wall lamp made of AirCoral® that emanates a concrete light, a uniform guide throughout walls. A diffused light distribution, symmetrical and regular; a direct and indirect light. Walls, ceilings and furniture all get to be enhanced in detail, thanks to a light that gives visual quality. AirCoral® body IP20 protection grade Dimensions 250 x 110 x 90 mm Lamp A60 incandescent QT-DE 12 halogen TC-DEL fluorescent LED LED colour temperature: 3000K ( 2700K - 4000K upon request)

A professional projector in aluminium installable on rail and dust painted: Q2 is ideal to be placed in indoor environments. It has a disappearing, adjustable arm which can be hidden within the body. The different and interchangeable lens, which can be easily replaced without any specific items, best combine functionality and design. A perfect design in which the driver remains hidden in the body of the spotlight. No power supply system visible. Aluminium body IP40 protection grade Adjustable light beam inclination (+- 360°) Projector Ø 60 x 180 mm LED COB lamp professional LED colour temperature 3000 K (2700 - 3500 K - 4000 K on request)

Rhino, an indoor totally disappearing recessed luminaire made of Coral®, installable on plasterboard ceilings or walls, is a versatile product, characterized by an extractable recess with interchangeable lens. It enlights spaces perfectly and in a very incisive way, enriching them with ever-changing plays of light. The projector can be oriented in several ways, in a completely external position or in a recessed one. The latter, conceived to obtain a minimal visual impact. When the projector is not recessed it is 360° adjustable on the horizontal line and 90° on the vertical one. Coral® body IP40 protection grade Adjustable light beam inclination (+- 360°) Light emission hole Ø 50 Dimensions Ø 110 x 100 mm LED lamp COB professional LED colour temperature: 3000K (2700 K - 4000 K on request)

Unleaf is a total recessed luminaire made of AirCoral® and installable on plasterboard or brick walls and ceilings. A perfect cut on the wall, it shapes spaces and architectonic projects with an original luminescent touch. The product surface sinks into the wall, modelling it through light. An underlying, embellishing beam for a lamp of peculiar design and unique elegance; characteristics reflected in the suggestive atmosphere recreated in the environment by the luminaire. AirCoral® body IP20 protection grade Dimensions 450 x 450 x 95 mm LED light source LED colour temperature: 3000 K (on demand 2700 K - 4000 K)

Yang is a bi-emission indoor lamp made of AirCoral® and installable on walls. It has a multifaceted form, a twine of inclined surfaces crossing each other on which the emanated beam plays, creating a juxtaposition of light and shadow. Yang scatters a welcoming light which does not invade spaces, but embraces them. AirCoral® body IP40 protection grade Dimensions 500 x 110 x 90 mm Light source LED LED colour temperature: 3000 K (on demand 2700 K - 4000 K)

POOL is a high performance submersion luminaire designed specifically for swimming pools and freshwater. Available in three dimensions, it is equipped with halogen lamps and LED light sources, monochromatic and RGBW, for emotion and charm underwater.