2D Internet outlet

2D Electric symbol

2D electric symbol

2D exhaust symbol

2D Downlight symbol

2D Halogen lamp

2D Inbow light

2D Outbow light

2D Outdoor Light

2D Pendant light

2D Post lamp

2D Washbasin lamp

2D electric symbol

2D electric symbol

2D floor spot lamp

2D Panasonic switch

2D Panasonic switch symbol

2D Panasonic switch symbol

2D power outlet symbol

2D special power outlet symbol

2D electric symbol

2D electric symbol

2D electric symbol

2D electric symbol

2D electric symbol

2D electric symbol

Electrical workbench approximately 34" H x 72" W x 36" D. Characteristics/components include butcher block maple top; with two drawer or door pedestals and an electronic riser wiring kit. This workbench is used in wood and metal workshops. Workbench is a mix and match construction and can be configured to end users needs.

FAAC J200 SA Semi-Automatic bollard resolves the problems of transit and/or parking control with no need of electric power supply (particularly suitable for areas difficult to wire). The gas actuator allows it to be lifted automatically with a key. It is lowered by pressing the head of the bollard. J200 SA main features are:: 1. Power supply and wiring not needed 2. Simple and safe movements thanks to the dedicated release key 3. Kept lock in up position (against accidental release) 4. Very low (and easy) maintenance needed 5. No pit needed: laying and civil works performed in a single operation 6. Easy transport, storage and laying thanks to the limited weight

FAAC J200 F Fixed bollard does not require either invasive laying operations or electric wiring. It is therefore suitable for permanent installations to define residential pedestrian areas or for multiple installations together with other automatic or semi-automatic bollards. J200 F main features are:: 1. Power supply and wiring not requested 2. Simple laying and limited excavation 3. Guarantees aesthetic coherency in multiple installations together with retractable bollards. 4. Possibility of removing the bollard to open the passage temporarily 5. Easy transport, storage and laying thanks to the limited weight

FAAC J275 SA Semi-Automatic traffic bollard solves any transit and/or park control problems without the need of electric power supply (particularly suitable for old town centers and areas difficult to wire). In fact, thanks to a gas operator, raising occurs automatically by means of a key release. Lowering occurs by a foot pressure on the bollard head. J275 SA main features are:: 1. Power supply and wiring not needed 2. Simple and safe movements thanks to the dedicated release key 3. Kept lock in up position (against accidental release) 4. Very low (and easy) maintenance needed

FAAC J275 F Fixed traffic bollard does not require invasive civil works, nor electric wiring. It is therefore suitable for permanent installations, to define pedestrian areas, or for multiple installations together with other retractable bollards. J275 F main features are:: 1. Power supply and wiring not requested 2. Simple laying and limited excavation 3. Guarantees aesthetic coherency in multiple installations together with retractable bollards. 4. Possibility of removing the bollard to open the passage temporarily

FAAC J355 F M30 bollard has successfully passed the ASTM F 2656-07 simulation testing. FAAC J355 F M30 bollard is therefore suitable for the permanent protection of sensitive areas perimeters, alone or in combination with retractable (HA) models. J355 F M30 main features are: 1. Compliant with ASTM F 2656-07 2. Power supply and wiring not requested 3. Shallow mount concept: just 350mm excavation depth required 4. Modular underground structure: to facilitate the laying and increase the overall crash resistance in multiple installation 5. Guarantees aesthetic coherency in multiple installations together with retractable bollards.

FAAC J355F M50 bollard has successfully passed the ASTM F 2656-07 simulation testing. FAAC J355 F M50 bollard is therefore suitable for the permanent protection of sensitive areas perimeters, alone or in combination with retractable (HA) models. FAAC J355 F M50 main features are: 1. Compliant with ASTM F 2656-07 2. Power supply and wiring not requested 3. Shallow mount concept: just 350mm excavation depth required 4. Modular underground structure: to facilitate the laying and increase the overall crash resistance in multiple installation 5. Guarantees aesthetic coherency in multiple installations together with retractable bollards.

The series of UFO tables, characterized by its elegant and evergreen oval or round design, is offered in many standard versions and matching of finishes: UFO in the classic version with veneer top and lacquered base or fully lacquered, UFO-Full fully covered with veneer, UFO-Soft fully covered with soft-leather. Over the listed dimensions we can produce Ufo tables in "unlimited" sizes. In addition, upon request, it is possible to have marble or back-painted glass tops as well additional functions such as wiring predisposition. All variants have the top completely made of solid multilayer shaped wood; the base has an internal wooden structure, then covered with a moulded shaped cone of multilayer in high thickness, covered with veneer.

PowerCat 6 Patch Panels are the premier Molex patch panel product line. A key product used in both Category 6 link and channel gigabit ethernet applications. The IDC section consists of V-shaped contacts that flex not fatigue when terminated. Each port features a patented spring-loaded shutter and can be colour coded to match jack outlets. Offering both front and rear labelling options, the patch panel is constructed of cold-rolledsteel for additional strength and durability. [LIST] Available in 1U 24 Port and 2U 48 Port density Each port features the patented spring-loaded shutter: prevents incomplete mating, protects from dust and contaminants Patented IDC V-shaped contacts that flex not fatigue when terminated Features pointed IDC towers to speed termination and enhance cable retention Dual colour-coding allows for 568 A/B wiring configuration Front and rear port labelling as well as panel identification label 4 x 6 ganged jack configuration Individually removable patch panel ports Integral cable management shelf ensures bend radius compliance Available with either ANSI or metric hardware kit Can be terminated using industry standard punchdown tools RJ-11& RJ-12 compatible Molded category identification on each port face as well as optional port identification icon [/LIST]

High-class pendant profile luminaire with LEDs, designed for direct light emission, made of an extruded aluminium section with natural anodised finish A6C0. End caps, 5 or 7-pin connection terminal and 7-pin feed-through wiring included. Mounting by suspension cables (max. length 2000mm), infinitely adjustable with quick release. Light emission through a diffuser made of satined polycarbonate for an almost homogeneous emission of light or a clear microprism for reduced brightness. Luminaire equipped with the latest generation of lined-up LED boards, colour rendering index Ra > 80, small colour tolerance MacAdam 3.

High-class pendant profile luminaire with LEDs, designed for direct-indirect light emission, made of an extruded aluminium section with natural anodised finish A6C0. End caps, 5 or 7-pin connection terminal and 7-pin feed-through wiring included. Mounting by suspension cables (max. length 2000mm), infinitely adjustable with quick release. Direct light emission through a diffuser made of satined polycarbonate for an almost homogeneous emission of light or a clear microprism for reduced brightness. Indirect light emission through a diffuser made of satined polycarbonate. Luminaire equipped with the latest generation of lined-up LED boards, colour rendering index Ra>80, small colour tolerance MacAdam 3.

High-class profile luminaire with LEDs, designed for direct light emission and surface mounting, made of an extruded aluminium section with natural anodised finish A6C0. End caps, mounting clips, 5 or 7-pin connection terminal and 7-pin feed-through wiring included. Light emission through a diffuser made of satined polycarbonate for an almost homogeneous emission of light or a clear polycarbonate microprism for reduced brightness (LRA). Luminaire equipped with the latest generation of lined-up LED boards, colour rendering index Ra > 80, small colour tolerance MacAdam 3.

High-class profile luminaire with LEDs, designed for direct light emission and wall mounting, made of an extruded aluminium section with natural anodised finish A6C0. End caps, 5 or 7-pin connection terminal and 7-pin feed-through wiring included. Wall mounting using the attached brackets. Light emission through a flush-mount snap-in flat diffuser made of satined polycarbonate for an almost homogeneous emission of light. Luminaire equipped with the latest generation of LED boards, colour rendering index Ra>80, small colour tolerance MacAdam 3.

High-class profile luminaire with LEDs, designed for direct-indirect light emission and wall mounting, made of an extruded aluminium section with natural anodised finish A6C0. End caps, 5 or 7-pin connection terminal and 7-pin feed-through wiring included. Wall mounting using the attached brackets. Direct and indirect light emission through diffusers made of satined polycarbonate for an almost homogeneous emission of light. Luminaire equipped with the latest generation of LED boards, colour rendering index Ra>80, small colour tolerance MacAdam 3.

High-class profile luminaire made of an extruded aluminium section with natural anodised finish A6C0, designed for direct light emission and recessed mounting in false ceilings (ranging from 12.5 to 40mm thick) with a recessed-mount bracket (sold separately). Rectangular aluminium end caps, 5 or 7-pin connection terminal and 7-pin feed-through wiring included. Light emission through a diffuser made of satined polycarbonate for an almost homogeneous emission of light or a clear microprism for reduced brightness. Luminaire equipped with the latest generation of LED boards, colour rendering index Ra>80, small colour tolerance MacAdam 3.

High-class pendant profile luminaire with LEDs, designed for direct light emission, made of an extruded aluminium section with natural anodised finish A6C0. End caps, 5 or 7-pin connection terminal and 7-pin feed-through wiring included. Mounting by suspension cables (max. length 2000mm), infinitely adjustable with quick release. Light emission through a diffuser made of satined polycarbonate for an almost homogeneous emission of light or a clear microprism for reduced brightness. Luminaire equipped with the latest generation of lined-up LED boards, colour rendering index Ra > 80, small colour tolerance MacAdam 3.

High-class pendant profile luminaire with LEDs, designed for direct-indirect light emission, made of an extruded aluminium section with natural anodised finish A6C0. End caps, 5 or 7-pin connection terminal and 7-pin feed-through wiring included. Mounting by suspension cables (max. length 2000mm), infinitely adjustable with quick release. Direct light emission through a diffuser made of satined polycarbonate for an almost homogeneous emission of light or a clear microprism for reduced brightness. Indirect light emission through a diffuser made of satined polycarbonate. Luminaire equipped with the latest generation of lined-up LED boards, colour rendering index Ra>80, small colour tolerance MacAdam 3.

High-class profile luminaire with LEDs, designed for direct light emission and surface mounting, made of an extruded aluminium section with natural anodised finish A6C0. End caps, mounting clips, 5 or 7-pin connection terminal and 7-pin feed-through wiring included. Light emission through a diffuser made of satined polycarbonate for an almost homogeneous emission of light or a clear polycarbonate microprism for reduced brightness (LRA). Luminaire equipped with the latest generation of lined-up LED boards, colour rendering index Ra > 80, small colour tolerance MacAdam 3.

High-class profile luminaire with LEDs, designed for direct light emission and wall mounting, made of an extruded aluminium section with natural anodised finish A6C0. End caps, 5 or 7-pin connection terminal and 7-pin feed-through wiring included. Wall mounting using the attached brackets. Light emission through a flush-mount snap-in flat diffuser made of satined polycarbonate for an almost homogeneous emission of light. Luminaire equipped with the latest generation of LED boards, colour rendering index Ra>80, small colour tolerance MacAdam 3.

High-class profile luminaire with LEDs, designed for direct-indirect light emission and wall mounting, made of an extruded aluminium section with natural anodised finish A6C0. End caps, 5 or 7-pin connection terminal and 7-pin feed-through wiring included. Wall mounting using the attached brackets. Direct and indirect light emission through diffusers made of satined polycarbonate for an almost homogeneous emission of light. Luminaire equipped with the latest generation of LED boards, colour rendering index Ra>80, small colour tolerance MacAdam 3.

High-class profile luminaire made of an extruded aluminium section with natural anodised finish A6C0, designed for direct light emission and recessed mounting in false ceilings (ranging from 12.5 to 40mm thick) with a recessed-mount bracket (sold separately). Rectangular aluminium end caps, 5 or 7-pin connection terminal and 7-pin feed-through wiring included. Light emission through a diffuser made of satined polycarbonate for an almost homogeneous emission of light or a clear microprism for reduced brightness. Luminaire equipped with the latest generation of LED boards, colour rendering index Ra>80, small colour tolerance MacAdam 3.

The SRW6U SmartRack 6U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The side panels and front door lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible front door can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW6U comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 16.5 inches deep, such as network switches and patch panels.

The SRW9U SmartRack 9U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The side panels and front door lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible front door can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW9U comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 16.5 inches deep, such as network switches and patch panels.

The SRW10US SmartRack 10U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW10US comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.

The SRW12US SmartRack 12U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW12US comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.

The SRW18US SmartRack 18U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 250 pounds. The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW18US comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.

The SRW12USG SmartRack 12U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The front door features a shatter-resistant clear acrylic window that lets you monitor equipment readouts without unlocking the enclosure. Not only does the window help prevent equipment tampering and reduce acoustic noise, but it also adds visual flair to your IT installation. The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft. The top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW12USG comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and 12-24 threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.

Plenty of space for the wiring Fully perfected in terms of form and function, weather-proof and largely UV-resistant, and made of unbreakable thermosettting plastic: The WG 800 that is also protected against sprayed water can be illuminated and lettered throughout and sets new standards for professional electrical installation work through the ample amount of space allowed for the wiring.

Excel Dryer is proud to announce a breakthrough in hand drying technology. The XLERATOR hand dryers deliver 3 times faster hand drying power. A user's hands will be thoroughly dry in only 10 to 15 seconds. The XLERATOR hand dryer is the result of a two-year research project, in which we studied every detail of the hand-drying process, with countless hours of field testing, listening to what users had to say, and, as a result, developed the patented technology behind the best hand dryer in the business. The benefits of the XLERATOR include:<br><ul><li>FAST! Dry hands completely in 10-15 Seconds</li><li>Uses 80% Less Energy than other hand dryers</li><li>95% Cost Savings vs. Paper Towels</li><li>GREENSPEC® Listed and Helps Qualify for LEED® Credits</li><li>Promotes Hygiene (automatic sensor activated)</li><li>Source Reduction Alternative</li></ul><br><br>Specification Tools<br><br>Product Images<br><br><br>Click diagram for enlargement.<br><br><b>Construction</b><br><br><ol><li>Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts.</li><li>Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring.</li><li>All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements.</li><li>Entire mechanism shall be internally grounded.</li></ol><p>   </p><br><br><b>Mechanism</b><br><br><ol><li>Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet).</li><li>Hand dryer heating element (970 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet).</li><li>Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if hands are not removed.</li></ol><br><br><b>Limited Warranty</b><br>The hand dryer shall be guaranteed to be free from defects for a period of five (5) years. Warranty shall include factory performed labor as well as the repair or exchange of defective parts, at manufacturer's option.

Excel Dryer is proud to announce a breakthrough in hand drying technology. The XLERATOR hand dryers deliver 3 times faster hand drying power. A user's hands will be thoroughly dry in only 10 to 15 seconds. The XLERATOR hand dryer is the result of a two-year research project, in which we studied every detail of the hand-drying process, with countless hours of field testing, listening to what users had to say, and, as a result, developed the patented technology behind the best hand dryer in the business. The benefits of the XLERATOR include:<br><ul><li>FAST! Dry hands completely in 10-15 Seconds</li><li>Uses 80% Less Energy than other hand dryers</li><li>95% Cost Savings vs. Paper Towels</li><li>GREENSPEC® Listed and Helps Qualify for LEED® Credits</li><li>Promotes Hygiene (automatic sensor activated)</li><li>Source Reduction Alternative</li></ul><br><br>Specification Tools<br><br>Product Images<br><br><br>Click diagram for enlargement.<br><br><b>Construction</b><br><br><ol><li>Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts.</li><li>Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring.</li><li>All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements.</li><li>Entire mechanism shall be internally grounded.</li></ol><p>   </p><br><br><b>Mechanism</b><br><br><ol><li>Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet).</li><li>Hand dryer heating element (970 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet).</li><li>Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if hands are not removed.</li></ol><br><br><b>Limited Warranty</b><br>The hand dryer shall be guaranteed to be free from defects for a period of five (5) years. Warranty shall include factory performed labor as well as the repair or exchange of defective parts, at manufacturer's option.

Excel Dryer is proud to announce a breakthrough in hand drying technology. The XLERATOR hand dryers deliver 3 times faster hand drying power. A user's hands will be thoroughly dry in only 10 to 15 seconds. The XLERATOR hand dryer is the result of a two-year research project, in which we studied every detail of the hand-drying process, with countless hours of field testing, listening to what users had to say, and, as a result, developed the patented technology behind the best hand dryer in the business. The benefits of the XLERATOR include:<br><ul><li>FAST! Dry hands completely in 10-15 Seconds</li><li>Uses 80% Less Energy than other hand dryers</li><li>95% Cost Savings vs. Paper Towels</li><li>GREENSPEC® Listed and Helps Qualify for LEED® Credits</li><li>Promotes Hygiene (automatic sensor activated)</li><li>Source Reduction Alternative</li></ul><br><br>Specification Tools<br><br>Product Images<br><br><br>Click diagram for enlargement.<br><br><b>Construction</b><br><br><ol><li>Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts.</li><li>Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring.</li><li>All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements.</li><li>Entire mechanism shall be internally grounded.</li></ol><p>   </p><br><br><b>Mechanism</b><br><br><ol><li>Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet).</li><li>Hand dryer heating element (970 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet).</li><li>Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if hands are not removed.</li></ol><br><br><b>Limited Warranty</b><br>The hand dryer shall be guaranteed to be free from defects for a period of five (5) years. Warranty shall include factory performed labor as well as the repair or exchange of defective parts, at manufacturer's option.

An LED professional floodlight for sport structures, traffic underpasses and outdoor car parks characterised by its particularly high lighting performance. The number of LED modules may vary from two to four depending on the level of performance required. Option of replacing any of the LED modules without having to make any manual electrical disconnections as there is no wiring between the modules. Easy and quick ceiling-mounted installation thanks to the bracket kit accessory - to be ordered separately. This allows the bracket, which acts as a template, to be fixed to the ceiling. Then the product is fitted sideways onto the bracket and secured with safety screws.

Advanced Touch Screen Control A Crestron® touch screen offers an ideal user-interface for controlling all the technology in your home, boardroom, classroom, courtroom, or command center. Touch screens simplify and enhance the way you use technology, doing away with those piles of remote controls, cluttered wall switches, disparate smartphone apps, and cryptic computer screens. For controlling audio, video, lighting, shades, HVAC, security, and other systems, Crestron touch screens are fully-customizable with easy-to-use controls and icons, true feedback and real-time status display, full-motion video windows, and a full-featured media player for an enhanced multiroom entertainment experience.   The Crestron TS-1542 delivers the ultimate touch screen experience — blending style and function with advanced high-definition graphics. In one slim device, the TS-1542 integrates a brilliant 15.6” Full HD touch screen display and high-performance digital graphics engine. Its sleek, modern design features premium metallic construction and edge-to-edge glass for a contemporary look that’s perfectly at home placed on an executive boardroom table, installed in a high-tech command center, or mounted on the wall in a luxury residence. Featuring enhanced Smart Graphics™ performance and dual-window HD streaming video display, the TS-1542 delivers an elegant and powerful touch screen control solution for a wide range of applications. Additional features include the abilities to control any function using voice commands, browse the Internet, annotate over a video image or whiteboard screen, and communicate using built-in VoIP intercom and phone functions.[1] Single-wire PoE+ connectivity and a choice of tabletop, wall, or VESA mounting options afford an integrator-friendly solution that’s easy to install and fits perfectly in any space. Standard finishes include either white or dark gray metallic, or choose the Signature Series option to design your own custom finish. Sleek, Versatile Design At just 1-3/4 inches (45 mm) deep, the TS-1542 can be mounted virtually anywhere using the supplied wall mount kit or a third-party VESA 100 compliant mounting arm, bracket, or stand. A tabletop tilt model (TS-1542-TILT) is also offered, which features an ultra-stylish, smooth-tilt base for use on a table, desk, podium, or countertop.   TS-1542 Signature Series The Signature Series allows the TS-1542 to be transformed into a beautiful showpiece adorned with custom colors and graphics on the tilt base and rear of the touch screen. No design is off limits, as Crestron provides the means for design ideas to be submitted, rendered for approval, and then made real. For more information, please visit: www.crestron.com/signatureseries.   Smart Graphics™ Crestron touch screens use Smart Graphics to deliver the ultimate user experience and the ultimate value by enabling the creation of dynamically rich user interfaces with incredible efficiency and unparalleled functionality. Using Smart Graphics, programmers can swiftly integrate fluid gesture-driven controls, animated feedback, rich metadata, embedded apps and widgets, and full-motion video for a deeply engaging and ultra-intuitive touch screen experience. Crestron Smart Graphics offers these enhancements and more: Cool-looking graphical buttons, sliders, knobs, and gauges that are intuitive and fun to use Kinetic effects to enhance the feeling of realism, with lists and toolbars that scroll with momentum at the flick of a fingertip Drag-and-drop objects that snap into place, offering an easy way to switch sources Dashboard widgets to personalize the touch screen with clocks, weather, news, and other information [1] A power-saving screensaver that can display the time, temperature, and other text content at a reduced brightness level Customizable themes allowing a completely different look and feel for every user, event, or season Fully-developed SmartObjects® that enable sophisticated control over complex devices with minimal programming A consistent look and feel across multiple touch screens of varying sizes Auto-Brightness Control The TS-1542 maintains optimal visibility under varying lighting conditions by automatically adjusting its display brightness according to changes in the ambient light level in the room. HD Streaming Video High-definition streaming video capability makes it possible to view security cameras and other video sources right on the touch screen. Up to two video windows can be displayed simultaneously. Native support for H.264 and MJPEG formats allows the TS-1542 to display live streaming video from IP cameras, streaming encoders (Crestron CEN-NVS200, DM-TXRX-100-STR, or similar [2]), and DigitalMedia™ switchers. Video is delivered to the touch screen over Ethernet, eliminating the need for any extra video wiring. Voice Recognition Some things are easier said than done, so why not just say what you want and let Crestron do it for you? With built-in voice recognition, the TS-1542 provides the ability to use spoken commands to control virtually anything. Voice recognition can be used to quickly turn devices on or off, select and play a specific media title or playlist, change the channel, choose a lighting scene, lock the doors, arm the security system, or enter a password. Simply say a command and Crestron does the rest.[1] Rava® SIP Intercom Rava SIP Intercom Technology enables hands-free VoIP communication with other Rava-enabled touch screens and door stations. Rava works over Ethernet, supporting 2-way intercom, video intercom [3], and paging without requiring any special wiring. VoIP phone capability is also possible through integration with a SIP-compatible IP phone system or SIP server, allowing hands-free telephone functionality complete with speed-dialing, caller ID, custom ringers, and other enhancements. Built-in echo cancellation affords full-duplex performance for clear, seamless voice communication. Speakers and Microphone The built-in speakers and microphone provide clear audio for intercom and phone calls, as well as for listening to multimedia. Audio Feedback Customized audio files can be loaded to add another dimension to the touch screen graphics using personalized sounds, button feedback, and voice prompts. Web Browsing Using its built-in web browser, the TS-1542 provides quick access to online program guides and other web-based services at the touch of a button, allowing enhanced touch screen control of DVRs and other appliances without having to pick up a separate tablet or smartphone. If a device can be controlled or managed through a web browser, it can be integrated into the Crestron system through the TS-1542. Of course, the web browser may also be used to simply browse the Internet, watch online videos, and check up on social media.[1] Multi-Touch Support The TS-1542’s capacitive touch screen affords enhanced capabilities for browsing web pages using multi-touch gestures. Keyboard Options Typing in passwords, URLs, and text searches is facilitated using the on-screen multi-language keyboard. A physical USB keyboard (not included) may also be connected. Built-in Annotation Whether conducting a high-level boardroom meeting or training seminar, sharing ideas in a huddle space, or watching sports in your home theater, annotation helps put the fine point on any presentation. Annotation provides the ability to illustrate your thoughts on-the-fly, letting you draw and write over streaming video and computer images, and sketch out ideas on a whiteboard screen. Native to the TS-1542, remote annotation capability allows multiple participants, each with a separate touch screen, to draw with their fingertips over the same video image or whiteboard, enabling enhanced collaboration in a classroom, courtroom, or council chamber. Adding a Crestron Digital Graphics Engine (model DGE-100 [2]) connected to the room’s main display allows the whole annotation session to be viewed by the entire audience. Single-Wire Connectivity A simple Ethernet LAN connection with PoE+ is all that is required to wire the TS-1542, containing all control, video, intercom, and power signals within a single wire. If the LAN does not support PoE+, the TS-1542 may be powered using the supplied 100-240V power pack or 24VDC Cresnet® power.[4] Power over Ethernet Using PoE+ technology, the TS-1542 can get its operating power right through the LAN wiring. PoE (Power over Ethernet) eliminates the need for a local power supply or any dedicated power wiring. To supply PoE+ to a network of TS-1542 touch screens and other devices, Crestron offers the CEN-SWPOE-16 16-Port Managed PoE Switch.[2] Interface Module Each TS-1542 ships with a compact interface module (TS-1542-IMCW), which may be used as required to provide an RJ45 LAN connection for the touch screen. The module can be mounted in a 1-gang electrical box or floor box, under a table, or in a podium or equipment rack. A 6 foot (1.8 meter) long LAN cable is included for connection between the module and touch screen. NOTE: When surface mounted using the wall mount kit (included with models TS-1542-B-S and TS-1542-W-S only), all wiring enters through an electrical box or cut-out and is concealed from view. For this method of installation, the interface module may not be required. Notes: 1. Voice recognition, web browsing, weather information, and certain other functions require an Internet connection. 2. Item(s) sold separately. 3. H.264 compatible IP camera required. 4. Connection to a Cresnet network or power supply is for power only. Does not support Cresnet data communications. 5. Supports up to two simultaneous streaming inputs with a maximum combined total bitrate of 25 Mbps.

The GLS-PART-CN is a sleek, surface-mount partition sensor that utilizes the dependable Cresnet® wired network for power and communications. Designed with hospitality environments in mind, this easily installed sensor uses an infrared (IR) beam to sense the position of movable partitions within a space. The IR beam’s signal strength is adjustable and features a sensing distance of up to four feet, making the GLS-PART-CN a versatile partition sensor with optimized sensing accuracy. Three LEDs on the unit provide at-a-glance information on the sensor’s state of power, communications, and partition detection. The GLS-PART-CN offers mounting options for rooms with finished or droptile ceilings. The GLS-PART-CN has plug-in outputs and built-in time delays. Also, the partition sensor easily connects via Cresnet® to a Crestron control processor to manage divisible room environments. Cresnet The GLS-PART-CN uses the dependable Cresnet wired network for communication between devices. Cresnet provides a simple solution for configuring and wiring sensors as part of any complete Crestron system. Cresnet is the communications backbone for Crestron lighting dimmers, keypads, shades, thermostats, and many other devices. This flexible 4-wire bus provides data communications and 24 Volts DC power for all of the devices on the Cresnet network. Versatile Installation The GLS-PART-CN has a white finish and can mount directly into finished ceilings. For droptile ceilings, the GLS-PART-CN installs into a 1-gang, 3-1/2 inch deep electrical box. In both instances, a decorator-style faceplate[1] can be used to match the GLS-PART-CN with the color of the room. Only about 20 mm of the GLS-PART-CN is visible after installation, making it an unobtrusive addition to a room. Digital Output This sleek sensor delivers unparalleled versatility through an additional output on the terminal block, which can be used as an alternate method of integration with a Crestron Control System® or other system. The 5th pin of the Cresnet connector provides either a 24 Volt, 10 mA output or a closure to ground, perfect for connection with a Versiport or digital input port. Notes: 1. Sold separately.

Advanced Touch Screen Control A Crestron® touch screen offers an ideal user-interface for controlling all the technology in your home, boardroom, classroom, courtroom, or command center. Touch screens simplify and enhance the way you use technology, doing away with those piles of remote controls, cluttered wall switches, disparate smartphone apps, and cryptic computer screens. For controlling audio, video, lighting, shades, HVAC, security, and other systems, Crestron touch screens are fully-customizable with easy-to-use controls and icons, true feedback and real-time status display, full-motion video windows, and a full-featured media player for an enhanced multiroom entertainment experience.   The Crestron TS-1542-C delivers the ultimate touch screen experience — blending style and function with advanced high-definition graphics. In one slim device, the TS-1542-C integrates a brilliant 15.6” Full HD touch screen display and high-performance digital graphics engine. Its sleek, modern design features premium metallic construction and edge-to-edge glass for a contemporary look that’s perfectly at home placed on an executive boardroom table, installed in a high-tech command center, or mounted on the wall in a luxury residence. Featuring enhanced Smart Graphics™ performance and dual-window HD video display, the TS-1542-C delivers an elegant and powerful touch screen control solution for a wide range of applications. Its DM 8G+® input provides a single-wire interface carrying high-speed Ethernet, uncompressed 4K video, H.264 streaming video, and PoDM++ power, all over a single CAT type cable. Additional features include the abilities to control any function using voice commands, browse the Internet, annotate over a video image or whiteboard screen, and communicate using built-in VoIP intercom and phone functions.[1] A choice of tabletop, wall, or VESA mounting options afford an integrator-friendly solution that’s easy to install and fits perfectly in any space. Standard finishes include either white or dark gray metallic, or choose the Signature Series option to design your own custom finish. Sleek, Versatile Design At just 1-3/4 inches (45 mm) deep, the TS-1542-C can be mounted virtually anywhere using the supplied wall mount kit or a third-party VESA 100 compliant mounting arm, bracket, or stand. A tabletop tilt model (TS-1542-TILT-C) is also offered, which features an ultra-stylish, smooth-tilt base for use on a table, desk, podium, or countertop.   TS-1542-C Signature Series The Signature Series allows the TS-1542-C to be transformed into a beautiful showpiece adorned with custom colors and graphics on the tilt base and rear of the touch screen. No design is off limits, as Crestron provides the means for design ideas to be submitted, rendered for approval, and then made real. For more information, please visit: www.crestron.com/signatureseries.   Smart Graphics™ Crestron touch screens use Smart Graphics to deliver the ultimate user experience and the ultimate value by enabling the creation of dynamically rich user interfaces with incredible efficiency and unparalleled functionality. Using Smart Graphics, programmers can swiftly integrate fluid gesture-driven controls, animated feedback, rich metadata, embedded apps and widgets, and full-motion video for a deeply engaging and ultra-intuitive touch screen experience. Crestron Smart Graphics offers these enhancements and more: Cool-looking graphical buttons, sliders, knobs, and gauges that are intuitive and fun to use Kinetic effects to enhance the feeling of realism, with lists and toolbars that scroll with momentum at the flick of a fingertip Drag-and-drop objects that snap into place, offering an easy way to switch sources Dashboard widgets to personalize the touch screen with clocks, weather, news, and other information [1] A power-saving screensaver that can display the time, temperature, and other text content at a reduced brightness level Customizable themes allowing a completely different look and feel for every user, event, or season Fully-developed SmartObjects® that enable sophisticated control over complex devices with minimal programming A consistent look and feel across multiple touch screens of varying sizes Auto-Brightness Control The TS-1542-C maintains optimal visibility under varying lighting conditions by automatically adjusting its display brightness according to changes in the ambient light level in the room. DigitalMedia 8G+® & 4K Video Using DM 8G+ technology, the TS-1542-C achieves complete connectivity over a single CAT type twisted pair cable. The cable connects to a Crestron DM® system (i.e., a DM switcher or transmitter [2,3]), which can be located in a central equipment cabinet or some other remote location. The DM system provides the interface for all video, audio, and networking signals to the TS-1542-C. Power for the TS-1542-C can also be carried over the DM 8G+ connection by adding a PoDM++ compatible power source.[4] The DM 8G+ connection transports high-speed Ethernet, uncompressed 4K video, and stereo audio signals from the DM system to the TS-1542-C. Support for 4K video and HDCP 2.2 encryption ensures compatibility with a complete range of video sources. Any video source connected to the DM system, including 4K and Ultra HD sources, can be viewed right on the touch screen, either full screen or in a window. DM 8G+ supports 1080p, WUXGA, and 2K signals over cable lengths up to 330 feet (100 m) using Crestron DM Ultra or DM 8G Cable, or third-party CAT5e. Higher resolutions up to UHD and 4K are supported at distances up to 330 feet (100 m) using DM Ultra Cable, 230 feet (70 m) using DM 8G Cable, or 165 feet (50 m) using CAT5e.[5] HD Streaming Video High-definition streaming video capability makes it possible to view live streaming video from IP cameras and streaming encoders (Crestron CEN-NVS200, DM-TXRX-100-STR, DMC-STRO, or similar [2]). Up to two streaming video windows can be displayed simultaneously, or a single streaming window can be displayed alongside a DM 8G+ video window. H.264 and MJPEG streaming formats are supported. Voice Recognition Some things are easier said than done, so why not just say what you want and let Crestron do it for you? With built-in voice recognition, the TS-1542-C provides the ability to use spoken commands to control virtually anything. Voice recognition can be used to quickly turn devices on or off, select and play a specific media title or playlist, change the channel, choose a lighting scene, lock the doors, arm the security system, or enter a password. Simply say a command and Crestron does the rest.[1] Rava® SIP Intercom Rava SIP Intercom Technology enables hands-free VoIP communication with other Rava-enabled touch screens and door stations. Rava works over Ethernet, supporting 2-way intercom, video intercom [6], and paging without requiring any special wiring. VoIP phone capability is also possible through integration with a SIP-compatible IP phone system or SIP server, allowing hands-free telephone functionality complete with speed-dialing, caller ID, custom ringers, and other enhancements. Built-in echo cancellation affords full-duplex performance for clear, seamless voice communication. Speakers and Microphone The built-in speakers and microphone provide clear audio for intercom and phone calls, as well as for listening to multimedia. Audio Feedback Customized audio files can be loaded to add another dimension to the touch screen graphics using personalized sounds, button feedback, and voice prompts. Web Browsing Using its built-in web browser, the TS-1542-C provides quick access to online program guides and other web-based services at the touch of a button, allowing enhanced touch screen control of DVRs and other appliances without having to pick up a separate tablet or smartphone. If a device can be controlled or managed through a web browser, it can be integrated into the Crestron system through the TS-1542-C. Of course, the web browser may also be used to simply browse the Internet, watch online videos, and check up on social media.[1] Multi-Touch Support The TS-1542-C’s capacitive touch screen affords enhanced capabilities for browsing web pages using multi-touch gestures. Notes: 1. Voice recognition, web browsing, weather information, and certain other functions require an internet connection. 2. Item(s) sold separately. 3. The DM device to which the TS-1542-C is connected must have an Ethernet connection to a Crestron control system. 4. Optional PoDM++ injector, model DM-PSU-ULTRA-MIDSPAN, sold separately. Any wiring carrying PoDM is for intra-building use only and should not be connected to a line that runs outside of the building in which the PoDM PSE (power sourcing equipment) is located. 5. The maximum cable length for DigitalMedia 8G+ (DM 8G+) is dependent upon the type of cable and resolution of the video signal. Refer to the “DM 8G+ Maximum Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete DM system design guidelines. All wire and cables are sold separately unless noted otherwise. 6. H.264 compatible IP camera required. 7. Connection to a Cresnet network or power supply is for power only. Does not support Cresnet data communications. 8. Supports up to two simultaneous streaming inputs with a maximum combined total bitrate of 25 Mbps.

The Tork Mini Mechanical Hand Towel Roll Dispenser is ideal for environments where space is limited. Designed to fit tight spaces previously reserved for folded towels, the Tork Mini Mechanical Dispenser provides the operational benefits of a larger roll towel dispenser in a compact and attractive design. At just over 12 inches high, it is nearly six inches shorter than a full-size dispenser so it can fit into tight spaces like those between cabinets and countertops. Tork Mini Mechanical Dispenser does not require external electricity, wiring or batteries and the reversible cover can be installed to open from the left or right, increasing the options for placement. Dispenses and cuts a single 11-inch towel is ready and waiting for the next patron. There are no settings to adjust and no levers or buttons are required to operate the dispenser, reducing the risk of cross-contamination. The translucent cover saves maintenance time as staff can see at a glance when it is time to refill the dispenser, and the locking cover prevents pilferage. Accommodates a variety of 8 inch controlled roll towels.

The Tork Mini Mechanical Hand Towel Roll Dispenser is ideal for environments where space is limited. Designed to fit tight spaces previously reserved for folded towels, the Tork Mini Mechanical Dispenser provides the operational benefits of a larger roll towel dispenser in a compact and attractive design. At just over 12 inches high, it is nearly six inches shorter than a full-size dispenser so it can fit into tight spaces like those between cabinets and countertops. Tork Mini Mechanical Dispenser does not require external electricity, wiring or batteries and the reversible cover can be installed to open from the left or right, increasing the options for placement. Dispenses and cuts a single 11-inch towel is ready and waiting for the next patron. There are no settings to adjust and no levers or buttons are required to operate the dispenser, reducing the risk of cross-contamination. The translucent cover saves maintenance time as staff can see at a glance when it is time to refill the dispenser, and the locking cover prevents pilferage. Accommodates a variety of 8 inch controlled roll towels.

The Tork Mini Mechanical Hand Towel Roll Dispenser is ideal for environments where space is limited. Designed to fit tight spaces previously reserved for folded towels, the Tork Mini Mechanical Dispenser provides the operational benefits of a larger roll towel dispenser in a compact and attractive design. At just over 12 inches high, it is nearly six inches shorter than a full-size dispenser so it can fit into tight spaces like those between cabinets and countertops. Tork Mini Mechanical Dispenser does not require external electricity, wiring or batteries and the reversible cover can be installed to open from the left or right, increasing the options for placement. Dispenses and cuts a single 11-inch towel is ready and waiting for the next patron. There are no settings to adjust and no levers or buttons are required to operate the dispenser, reducing the risk of cross-contamination. The translucent cover saves maintenance time as staff can see at a glance when it is time to refill the dispenser, and the locking cover prevents pilferage. Accommodates a variety of 8 inch controlled roll towels.

The Tork Mini Mechanical Hand Towel Roll Dispenser is ideal for environments where space is limited. Designed to fit tight spaces previously reserved for folded towels, the Tork Mini Mechanical Dispenser provides the operational benefits of a larger roll towel dispenser in a compact and attractive design. At just over 12 inches high, it is nearly six inches shorter than a full-size dispenser so it can fit into tight spaces like those between cabinets and countertops. Tork Mini Mechanical Dispenser does not require external electricity, wiring or batteries and the reversible cover can be installed to open from the left or right, increasing the options for placement. Dispenses and cuts a single 11-inch towel is ready and waiting for the next patron. There are no settings to adjust and no levers or buttons are required to operate the dispenser, reducing the risk of cross-contamination. The translucent cover saves maintenance time as staff can see at a glance when it is time to refill the dispenser, and the locking cover prevents pilferage. Accommodates a variety of 8 inch controlled roll towels.

FAAC J275 F 2K Fixed traffic bollard does not require invasive civil works, nor electric wiring. It is therefore suitable Delimitation and protection of perimeter of critical areas like: military sites, airports, embassies, consulates, banks, marine zones, prisons, sensitive industrial sites or wherever high security is required. J275 F 2K main features are: 1. Power supply and wiring not requested 2. Simple laying and limited excavation 3. Guarantees aesthetic coherency in multiple installations together with retractable bollards. 4. High resistance to impact

<p>The CHV-TSTATEX is a wireless thermostat featuring infiNET EX® technology. The CHV-TSTATEX installs just like a conventional thermostat because no extra wires are needed to connect to the control system. Although functional as a standalone thermostat, the CHV-TSTATEX delivers enhanced functionality as part of a complete Crestron® automation system. Integrating HVAC with a Crestron system can help lower energy bills and increase user friendliness.</p> <p>The CHV-TSTATEX is designed for one- or two-stage heating and one- or two-stage cooling control of baseboard, forced air, heat pump[1], and dual-fuel heat pump[1] HVAC systems. The large backlit LCD display provides a clear view of temperature, set point, system mode, fan mode, system status, and setup functions. Climate control features include separate heating and cooling set points, and adjustable anticipators to prevent overshooting the desired temperature. Continuous fan operation can be selected when needed for increased circulation.</p> <p>Fan Coil Unit Support<br>The CHV-TSTATEX-FCU model of the infiNET EX thermostat provides the functionality of controlling fan coil units[2]. Aesthetically identical to the base model, the CHV-TSTATEX-FCU has custom firmware, display programming and terminal labels designed for three-speed fan applications. The CHV-TSTATEX-FCU supports on/off control of the valves and the fan in four-pipe fan coil applications, eliminating the need for an additional device dedicated to controlling the fan coil unit itself. </p> <p>infiNET EX Communications<br>Ultra-reliable infiNET EX wireless technology provides steadfast two-way RF communications throughout a residential or commercial structure without the need for physical control wiring. Employing a 2.4 GHz mesh network topology, each infiNET EX device functions as an expander, passing command signals through to every other infiNET EX device within range (approximately 150 feet or 46 meters indoors), ensuring that every command reaches its intended destination without disruption[3].</p> <p>The CHV-TSTATEX communicates with a Crestron control system via an infiNET EX Wireless Gateway (model CEN-RFGW-EX, DIN-AP3MEX, or MC3[4]). Up to 100 infiNET EX devices may coexist on a single wireless network, and every non-battery-powered device that is added to the network effectively increases the range and stability of the entire network by providing multiple redundant signal paths[3]. Built-in Dynamic Frequency Allocation continuously monitors RF conditions, automatically selecting the clearest channel to prevent interference from neighboring networks, cordless phones, and microwaves. </p> <p>Automation System Integration<br>The wireless connection to the control system allows the functions of the CHV-TSTATEX to be controlled from touch screens, keypads, wireless remotes, computers, or even a mobile device. It supports unlimited flexibility for remote control, scheduling, and integration with other devices and systems. In the event that communication with the control system is disrupted for any reason, the CHV-TSTATEX will remain operable to control the HVAC system.</p> <p>Easy Installation<br>Because no control wires are required, the CHV-TSTATEX can be installed just like any conventional thermostat. To simplify installation, physical switches are provided for the most critical configuration options, including heat/cool type, heat pump behavior, power settings, number of heating/cooling stages, and fan options. These settings allow HVAC contractors to install and test the thermostats prior to the appearance of a Crestron system integrator. </p> <p>Remote Sensors<br>Optional remote temperature sensors can be connected to the CHV-TSTATEX for enhanced flexibility and optimized performance. Climate can be regulated according to an average of multiple sensors, or the built-in sensors can be disabled entirely to allow the CHV-TSTATEX to be installed out of view. For heat pump-type systems, outdoor temperature can be monitored to optimize system performance. Compatible sensors include the CHV-RTS and the CHV-RSS.</p> <p>Features<br>Summary Of Features </p> <p>Wall mount heat/cool thermostat for baseboard, forced air, and heat pump[1] HVAC systems<br>Crestron system integration via infiNET EX® wireless network<br>Saves on energy costs with advanced programming abilities <br>Supports two remote temperature sensors<br>Fail-safe mode allows operation in event of control system failure<br>Backlit LCD display<br>Fan coil unit control[2] (CHV-TSTATEX-FCU model only)<br>Available in white, black, or almond finish</p> <p>Notes: <br>1. Heat pump systems require an outdoor temperature sensor; contact Crestron for additional design assistance.<br>2. Four-pipe fan coil units are supported.<br>3. Any infiNET EX device that provides expander functionality will effectively extend the range of the wireless network beyond the initial range of the gateway. Battery-powered infiNET EX devices do not provide expander functionality. To achieve expander functionality, the CHV-TSTATEX must be connected to a 24-Volt power source. Wireless networks composed predominantly of battery-powered devices may need additional infiNET EX expanders, such as the CLW-EXPEX or GLA-EXPEX (sold separately), or other non-battery-powered infiNET EX devices to ensure proper functionality of the network and battery life for the devices. Refer to the Best Practices for Installation and Setup of Crestron RF Products, Doc. #6689 for complete system design guidelines, or contact Crestron True Blue Support for further assistance.<br>4. Item(s) sold separately.</p>

<p>The MP-B10 is an enhanced pushbutton control panel designed for installation in a wall or podium. It can be used with any Crestron® control system or presentation switcher, and it provides a perfect complement to any Crestron MPC Media Presentation Controller. Available in white or black, the MP-B10 is constructed to handle the rigors of everyday use in a typical classroom, meeting room, lecture hall, or training facility.</p> <p>Its 10 “hard key” buttons can be custom programmed to control any function, such as system power, input source selection, and lighting presets. Audio volume and other parameters are adjustable using the control knob and LED bargraph. Custom backlit labeling of each button is facilitated using an assortment of pre-printed labels or Crestron Engraver software. </p> <p>A built-in IR receiver provides a gateway for RC-5 and Crestron compatible IR wireless remotes. An ambient light sensor is also included, which may be programmed to control the MP-B10’s backlight intensity and other customer functions. The MP-B10 can be powered through the network wiring using either Cresnet® or PoE (Power over Ethernet), requiring just one wire for operation.</p> <p>Features<br>Summary Of Features </p> <p>Wall mount pushbutton control panel<br>No programming required with select .AV Framework™ enabled switchers<br>10 programmable buttons with LED feedback<br>Customizable backlit button labels<br>Volume control knob and LED bargraph<br>Built-in IR receiver and light sensor<br>High-speed Ethernet or Cresnet® communications<br>PoE or Cresnet network powered<br>3-gang wall box-mountable</p>

<p>The MP-B20 is an enhanced pushbutton control panel designed for installation in a wall or podium. It can be used with any Crestron® control system or presentation switcher, and it provides a perfect complement to any Crestron MPC Media </p> <p>Presentation Controller. Available in white or black, the MP-B20 is constructed to handle the rigors of everyday use in a typical classroom, meeting room, lecture hall, or training facility.</p> <p>Its 15 “hard key” buttons can be custom programmed to control any function, such as system power, input source selection, transport control, and lighting presets. The 5-way directional navigation pad enables full control of displays and other devices that utilize an onscreen menu. Audio volume and other parameters are adjustable using the control knob and LED bargraph. Custom backlit labeling of each button is facilitated using an assortment of pre-printed labels or Crestron Engraver software.</p> <p>A built-in IR receiver provides a gateway for RC-5 and Crestron compatible IR wireless remotes. An ambient light sensor is also included, which may be programmed to control the MP-B20’s backlight intensity and other customer functions. The MP-B20 can be powered through the network wiring using either Cresnet® or PoE (Power over Ethernet), requiring just one wire for operation.</p> <p>Features<br>Summary Of Features </p> <p>Wall mount pushbutton control panel<br>15 programmable buttons with LED feedback<br>Customizable backlit button labels<br>5-way navigation pad<br>Volume control knob and LED bargraph<br>Built-in IR receiver and light sensor<br>High-speed Ethernet or Cresnet® communications<br>PoE or Cresnet network powered<br>3-gang wall box-mountable</p>

<p>Crestron® MPC is a family of 2-Series control systems designed for installation in a wall or podium. Perfect for classrooms, meeting rooms, lecture halls, and training facilities, the MPC-M5 provides a fully-programmable user interface featuring an attractive and intuitive layout of pushbuttons with customizable backlit labeling and wireless remote capability.</p> <p>Available in white or black, the MPC-M5 is constructed to handle the rigors of everyday use in a corporate or educational environment. An assortment of programmable control ports provides for interfacing with AV equipment, lighting, shades, screens, and other room devices. Ethernet connectivity allows for integration with Crestron Fusion® Cloud as part of a complete managed enterprise solution.</p> <p>Control Simplified<br>The MPC-M5 is engineered to be easy to integrate and use, yet versatile enough to suit each application perfectly. Its 10 programmable “hard key” buttons can be freely programmed for system power, input source selection, transport control, volume adjustment, lighting presets, and any other functions. Custom backlit labeling of the buttons is facilitated using an assortment of pre-printed labels or Crestron Engraver software.</p> <p>Wireless Remote<br>A range of options is available for adding wireless remote control to the MPC system. Its built-in IR receiver allows the use of any Crestron or third-party IR remote that supports RC-5 commands. Adding a CEN-GWEXER wireless gateway enables support for Crestron infiNET EX® and ER wireless remotes and touch screens.[1]</p> <p>Built-in Control Ports<br>Through its onboard control ports, the MPC-M5 interfaces directly with the video display or projector, projection screen, lift, occupancy sensors, and other devices in the room. In addition to high-speed Ethernet, there is a bidirectional RS-232 COM port, an IR/serial port, two relays, and two digital input ports right on the rear panel.</p> <p>Power over Ethernet<br>Using PoE technology, the MPC-M5 gets its operating power right through the LAN wiring. PoE (Power over Ethernet) eliminates the need for a local power supply or any dedicated power wiring. A PoE Injector (PWE-4803RU [1]) simply connects in line with the LAN cable at a convenient location. Crestron PoE switches (CEN-SW-POE-5 or CEN-SWPOE-16 [1]) may also be used to provide a total networking solution with built-in PoE.</p> <p>Crestron Fusion® and SNMP<br>As part of a complete managed network in a corporate enterprise, college campus, convention center, or any other facility, the MPC-M5 works integrally with Crestron Fusion Cloud to enable remote scheduling, monitoring, and control of rooms and technology from a central help desk. Built-in SNMP support enables integration with third-party network management software, allowing control and monitoring in a format that's familiar to IT personnel.</p> <p>Features<br>Summary Of Features </p> <p>Wall mount Crestron® 2-Series control system<br>10 programmable buttons with LED feedback<br>Customizable backlit button labels<br>Built-in IR receiver<br>RS-232, IR, 2 input, & 2 relay control ports<br>10/100 Ethernet<br>PoE network powered<br>Crestron Fusion® and SNMP remote management<br>Available in white or black<br>2-gang wall box mountable</p> <p>Notes: <br>1. Item(s) sold separately.</p>

<p>DigitalMedia™ NVX technology transports ultra high-definition 4K video with 60 Hz frame rates and 4:4:4 color sampling over standard Gigabit Ethernet. Support for HDR video (HDR10) and HDCP 2.2 ensures the ultimate in picture quality and compatibility for all of today’s varied media sources. Using standards-based Ethernet wiring and switches, DM® NVX delivers a vastly scalable, high-performance solution for enterprise-wide 4K content distribution.[1]</p> <p>The Crestron® DM-NVX-350 is a compact video encoder/decoder designed to function as either a transmitter or receiver with the ability to switch between the two modes programmatically via commands from a Crestron control system. Featuring simple web-based control and management, USB and KVM integration, and support for copper and fiber LAN connectivity, the DM-NVX-350 offers a one-stop solution for any-sized network AV installation.[2]</p> <p><strong>Real-Time 4K60 Video Distribution</strong><br>Engineered for demanding conference room and classroom applications, DM NVX ensures real-time, full-motion 4K60 video performance for the presentation of multimedia, videoconferencing, and live camera images. DM NVX employs high-quality JPEG 2000 encoding using a patent-pending technique that overlaps scaling and encoding latencies, achieving an ultra-low end-to-end latency of 30 ms at 60 fps, so on-screen functions such as mousing and game play are fluid and natural.</p> <p><strong>Encoder and Decoder in One</strong><br>In a single compact device, the DM-NVX-350 is configurable to operate as either a network AV encoder or decoder.</p> <ul><li>As an encoder, it allows a laptop computer, camera, or other media source to be connected via HDMI® and then transmitted over the network.[1]</li><li>As a decoder, it receives the signal from a DM NVX encoder and feeds it to a display device via the HDMI output. It can quickly and easily switch between multiple encoders on the network alongside locally-connected HDMI sources.[1]</li><li>The encoder/decoder mode can be switched on-the-fly via a control system to provide a versatile, cost-effective presentation switching solution using one integrated device.</li></ul><p><strong>2x1 HDMI® Auto-Switcher </strong></p>The DM-NVX-350 includes two HDMI inputs. Switching between the two inputs can be performed automatically using auto-switching mode, manually using the onboard input select button, programmatically via a Crestron control system, or through a computer using a web browser. When used as a decoder mounted behind a typical conference room display device, the HDMI inputs provide a convenient way to connect a Crestron AirMedia® presentation gateway.[1] <p><br></p><p><strong>HDMI Output</strong><br>When configured as a decoder, the DM-NVX-350’s HDMI output feeds the decoded signal to the local display device (or any other device with an HDMI input). Its built-in scaler ensures an optimal image, scaling the encoded source resolution up or down to match the native resolution of the display device. When used as an encoder, the HDMI output can be used to feed a local display, confidence monitor, or audio system.[1,3]</p> <p><strong>USB and KVM Integration</strong><br>For a complete signal management solution, DM NVX supports the extension of USB signals, which may be switched and routed alongside the AV signal or separately via the control system. USB 2.0 host and device ports are provided on each DM-NVX-350 box, allowing a USB mouse, keyboard, or other device to be connected at one box and routed to a computer or other host at another box. KVM switch functionality is a natural application for this feature, but all types of USB peripherals are supported including whiteboards, touch screens, game controllers, cameras, mobile devices, headsets, and flash drives.[4]</p> <p>USB signals can also be routed to other locations where a DM NVX box does not exist using Crestron USB over Ethernet Extender Modules (USB-EXT-DM). USB signals can be freely routed between DM NVX and USB-EXT-DM units over Ethernet under the management of a Crestron control system.</p> <p><strong>7.1 Surround Sound Audio</strong><br>DM NVX supports the lossless transport of 7.1 surround sound audio signals, including Dolby® TrueHD, Dolby Atmos®, DTS-HD®, DTS:X®, and uncompressed linear PCM. In decoder mode, the DM-NVX-350 has the ability to receive both multichannel and 2-channel downmix signals from a DM-NVX-351 or DM-NVX-351C encoder, allowing either signal to be selected at the HDMI output while the 2-channel signal is automatically routed to the analog output.</p> <p><strong>Analog Audio Embedding or De-embedding </strong><br>A balanced stereo analog audio port is included, which may be configured as either an input or output. As an input, it allows a stereo audio source to be connected and combined with the video signal from either HDMI input or the incoming network video stream. As an output, it can provide a stereo line-level signal to feed a local sound system or sound bar. The output volume is adjustable via a control system or web browser.[5]</p> <p><strong>Breakaway Audio</strong><br>A DM NVX decoder may select and combine separate video and audio signals from two different inputs, even two different encoders. There are just two exceptions: A) signals may not be combined between the two onboard HDMI inputs, and B) combining signals from two separate encoders is limited to 2-channel stereo audio.[6,7]</p> <p><strong>Text Overlay</strong><br>The ability to display dynamic or fixed text on screen provides a means to label the video source or display special instructions, schedules, announcements, alerts, and other messaging.</p> <p><strong>Video Wall Processing</strong><br>A video wall composed of up to 64 individual displays can be configured using multiple DM-NVX-350 units. Each unit provides fully-adjustable zoom capability and bezel compensation to accommodate a range of video wall configurations and display types. One DM-NVX-350 is required per display, supporting configurations of up to eight wide by up to eight high.</p> <p><strong>Key Features</strong><br></p><ul><li>4K60 4:4:4 video over standard Gigabit Ethernet</li><li>No latency penalty for real-time video performance</li><li>HDR (High Dynamic Range) video support (HDR10)</li><li>Dolby® TrueHD, Dolby Atmos®, DTS-HD®, DTS:X®, and uncompressed 7.1 linear PCM audio support</li><li>HDCP 2.2 compliant</li><li>Configurable as an encoder or decoder</li><li>Dual onboard RJ45 LAN ports</li><li>Option for a fiber optic network connection via SFP port [2]</li><li>Enterprise-grade security</li><li>Two auto-switching HDMI® inputs and one HDMI output [1]</li><li>Built-in 4K60 4:4:4 scaling</li><li>Onboard video wall processing</li><li>Analog audio port configurable as a balanced stereo input or output [5]</li><li>Analog audio embedding or de-embedding</li><li>Audio breakaway capability [6,7]</li><li>Dynamic text overlay capability</li><li>RS-232 and IR control ports [9]</li><li>CEC device control gateway [9]</li><li>USB and KVM signal extension and routing [4]</li><li>Easy setup via built-in webpages</li><li>Fully-controllable via a Crestron® control system</li><li>Compact, surface-mountable form factor</li><li>Powered via local power pack or optional power injector [8]</li><li>100-240V universal power pack included</li></ul> <p>1. 4K60 4:4:4 performance requires the use of HDMI cables with a minimum TMDS bandwidth of 18 Gbps, such as Crestron model CBL-HD (20 ft / 6.1 m max. length). If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables with a minimum bandwidth of 10.2 Gbps may be used, such as Crestron models CBL-HD-LOCK or CBL-HD (any available length). Performance may also be affected if an HDMI coupler is inserted in the HDMI signal path. Crestron coupling products (MP-WP150, MP-WP152, MPI-WP150, or FTA-CP-HD-101) and cable retractors (CBLR2-HD) all have a specified bandwidth of 10.2 Gbps, and thus do not support 4K60 4:4:4. Please be aware that bandwidth loss is cumulative, so the combination of multiple components inserted inline may reduce performance.<br>2. To add a fiber optic LAN port requires the purchase of a Crestron SFP-1G series SFP transceiver module (sold separately). All LAN ports on the DM-NVX-350 are for connection to an Ethernet based AV network or device; they cannot be connected to the “DM” ports of other Crestron devices.<br>3. When in encoder mode, the HDMI output resolution is matched to the resolution of the encoded source.<br>4. The DM-NVX-350 can be configured to accept the connection of a USB device or a USB host, not both. Crestron DM NVX products are engineered to deliver maximum compatibility with the widest possible range of USB products. Crestron does not guarantee that all USB products are compatible with DM NVX products. DM NVX is compatible with Crestron USB-EXT-DM products, but is not compatible with the “USB HID only” signal extender technology found in other Crestron DM products.<br>5. The analog audio port can function as an input or output, not both. Analog audio output is only functional when the DM-NVX-350 is receiving a 2-channel stereo input signal. To derive a 2-channel downmix signal from a multichannel surround sound source, please refer to the Crestron DM-NVX-351 or DM-NVX-351C.<br>6. Audio from one onboard HDMI input may not be combined with video from the other onboard HDMI input.<br>7. Combining audio from one encoder with video from another encoder utilizes the secondary 2-channel audio stream. Multichannel audio from one encoder cannot be combined with video from another encoder.<br>8. The DM-NVX-350 is powerable using the 24V power pack (included) or a DM-PSU-ULTRA-MIDSPAN (sold separately).<br>9. Device control via RS-232, IR, CEC, or Ethernet requires integration with a Crestron control system.<br>10. As an encoder, the DM-NVX-350 does not transmit audio via the secondary 2-channel stream except when it is receiving a 2-channel stereo input signal via the HDMI or analog inputs.<br>11. 3D video input signals are automatically converted to 2D.<br>12. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.</p>

<p>DigitalMedia™ NVX technology transports ultra high-definition 4K video with 60 Hz frame rates and 4:4:4 color sampling over standard Gigabit Ethernet. Support for HDR video (HDR10) and HDCP 2.2 ensures the ultimate in picture quality and compatibility for all of today’s varied media sources. Using standards-based Ethernet wiring and switches, DM® NVX delivers a vastly scalable, high-performance solution for enterprise-wide 4K content distribution.[1]</p> <p>The Crestron® DM-NVX-351 is a compact video encoder/decoder designed to function as either a transmitter or receiver with the ability to switch between the two modes programmatically via commands from a Crestron control system. Featuring simple web-based control and management, USB and KVM integration, and support for copper and fiber LAN connectivity, the DM-NVX-351 offers a one-stop solution for any-sized network AV installation.[2]</p> <p>The DM-NVX-351 includes all the features of the DM-NVX-350 with the addition of surround sound to stereo downmixing. Refer to the “7.1 Surround Sound Audio with Downmixing” section below for details.</p><p> </p><p><strong>Real-Time 4K60 Video Distribution</strong><br>Engineered for demanding conference room and classroom applications, DM NVX ensures real-time, full-motion 4K60 video performance for the presentation of multimedia, videoconferencing, and live camera images. DM NVX employs high-quality JPEG 2000 encoding using a patent-pending technique that overlaps scaling and encoding latencies, achieving an ultra-low end-to-end latency of 30 ms at 60 fps, so on-screen functions such as mousing and game play are fluid and natural.</p><p> </p><p><strong>Encoder and Decoder in One</strong><br>In a single compact device, the DM-NVX-351 is configurable to operate as either a network AV encoder or decoder.</p> <ul><li>As an encoder, it allows a laptop computer, camera, or other media source to be connected via HDMI® and then transmitted over the network.[1]</li><li>As a decoder, it receives the signal from a DM NVX encoder and feeds it to a display device via the HDMI output. It can quickly and easily switch between multiple encoders on the network alongside locally-connected HDMI sources.[1]</li><li>The encoder/decoder mode can be switched on-the-fly via a control system to provide a versatile, cost-effective presentation switching solution using one integrated device.</li></ul><p><strong>2x1 HDMI® Auto-Switcher </strong></p><p>The DM-NVX-351 includes two HDMI inputs. Switching between the two inputs can be performed automatically using auto-switching mode, manually using the onboard input select button, programmatically via a Crestron control system, or through a computer using a web browser. When used as a decoder mounted behind a typical conference room display device, the HDMI inputs provide a convenient way to connect a Crestron AirMedia® presentation gateway.[1]</p><p> </p><p><strong>HDMI Output</strong><br>When configured as a decoder, the DM-NVX-351’s HDMI output feeds the decoded signal to the local display device (or any other device with an HDMI input). Its built-in scaler ensures an optimal image, scaling the encoded source resolution up or down to match the native resolution of the display device. When used as an encoder, the HDMI output can be used to feed a local display, confidence monitor, or audio system.[1,3]</p><p> </p><p><strong>USB and KVM Integration</strong><br>For a complete signal management solution, DM NVX supports the extension of USB signals, which may be switched and routed alongside the AV signal or separately via the control system. USB 2.0 host and device ports are provided on each DM-NVX-351 box, allowing a USB mouse, keyboard, or other device to be connected at one box and routed to a computer or other host at another box. KVM switch functionality is a natural application for this feature, but all types of USB peripherals are supported including whiteboards, touch screens, game controllers, cameras, mobile devices, headsets, and flash drives.[4]</p> <p>USB signals can also be routed to other locations where a DM NVX box does not exist using Crestron USB over Ethernet Extender Modules (USB-EXT-DM). USB signals can be freely routed between DM NVX and USB-EXT-DM units over Ethernet under the management of a Crestron control system.</p><p> </p><p><strong>7.1 Surround Sound Audio with Downmixing</strong><br>DM NVX supports the lossless transport of 7.1 surround sound audio signals, including Dolby® TrueHD, Dolby Atmos®, DTS-HD®, DTS:X®, and uncompressed linear PCM. The DM-NVX-351 includes the ability to decode the incoming multichannel surround sound signal, whether from the network or an HDMI input, and downmix that signal to stereo. The stereo downmix signal is automatically routed to the onboard analog output [4], while the HDMI output can be configured to output either stereo or multichannel. As an encoder, the DM-NVX-351 distributes both stereo and multichannel signals simultaneously over the network, allowing either signal to be selected at any decoder on the network.</p><p> </p><p><strong>Analog Audio Embedding or De-embedding </strong><br>A balanced stereo analog audio port is included, which may be configured as either an input or output. As an input, it allows a stereo audio source to be connected and combined with the video signal from either HDMI input or the incoming network video stream. As an output, it can provide a stereo line-level signal to feed a local sound system or sound bar. The output volume is adjustable via a control system or web browser.[5]</p><p> </p><p><strong>Breakaway Audio</strong><br>A DM NVX decoder may select and combine separate video and audio signals from two different inputs, even two different encoders. There are just two exceptions: A) signals may not be combined between the two onboard HDMI inputs, and B) combining signals from two separate encoders is limited to 2-channel stereo audio.[6,7]</p><p> </p><p><strong>Text Overlay</strong><br>The ability to display dynamic or fixed text on screen provides a means to label the video source or display special instructions, schedules, announcements, alerts, and other messaging.</p><p> </p><p><strong>Video Wall Processing</strong><br>A video wall composed of up to 64 individual displays can be configured using multiple DM-NVX-351 units. Each unit provides fully-adjustable zoom capability and bezel compensation to accommodate a range of video wall configurations and display types. One DM-NVX-351 is required per display, supporting configurations of up to eight wide by up to eight high.</p><p> </p><strong>Key Features</strong><br><ul><li>4K60 4:4:4 video over standard Gigabit Ethernet</li><li>No latency penalty for real-time video performance</li><li>HDR (High Dynamic Range) video support (HDR10)</li><li>Dolby® TrueHD, Dolby Atmos®, DTS-HD®, DTS:X®, and uncompressed 7.1 linear PCM audio support</li><li>HDCP 2.2 compliant</li><li>Configurable as an encoder or decoder</li><li>Dual onboard RJ45 LAN ports</li><li>Option for a fiber optic network connection via SFP port [2]</li><li>Enterprise-grade security</li><li>Two auto-switching HDMI® inputs and one HDMI output [1]</li><li>Built-in 4K60 4:4:4 scaling</li><li>Onboard video wall processing</li><li>Analog audio port configurable as a balanced stereo input or output [5]</li><li>Analog audio embedding or de-embedding</li><li>Stereo downmixing of surround sound audio signals</li><li>Simultaneous distribution of stereo and surround sound signals</li><li>Audio breakaway capability [6,7]</li><li>Dynamic text overlay capability</li><li>RS-232 and IR control ports [9]</li><li>CEC device control gateway [9]</li><li>USB and KVM signal extension and routing [4]</li><li>Easy setup via built-in webpages</li><li>Fully-controllable via a Crestron® control system</li><li>Compact, surface-mountable form factor</li><li>Powered via local power pack or optional power injector [8]</li><li>100-240V universal power pack included</li></ul> <p>1. 4K60 4:4:4 performance requires the use of HDMI cables with a minimum TMDS bandwidth of 18 Gbps, such as Crestron model CBL-HD (20 ft / 6.1 m max. length). If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables with a minimum bandwidth of 10.2 Gbps may be used, such as Crestron models CBL-HD-LOCK or CBL-HD (any available length). Performance may also be affected if an HDMI coupler is inserted in the HDMI signal path. Crestron coupling products (MP-WP-150, MP-WP-152, MPI-WP-150, or FTA-CP-HD-101) and cable retractors (CBLR2-HD) all have a specified bandwidth of 10.2 Gbps, and thus do not support 4K60 4:4:4. Please be aware that bandwidth loss is cumulative, so the combination of multiple components inserted inline may reduce performance.<br>2. To add a fiber optic LAN port requires the purchase of a Crestron SFP-1G series SFP transceiver module (sold separately). All LAN ports on the DM-NVX-351 are for connection to an Ethernet based AV network or device; they cannot be connected to the “DM” ports of other Crestron devices.<br>3. When in encoder mode, the HDMI output resolution is matched to the resolution of the encoded source.<br>4. The DM-NVX-351 can be configured to accept the connection of a USB device or a USB host, not both. Crestron DM NVX products are engineered to deliver maximum compatibility with the widest possible range of USB products. Crestron does not guarantee that all USB products are compatible with DM NVX products. DM NVX is compatible with Crestron USB-EXT-DM products, but is not compatible with the “USB HID only” signal extender technology found in other Crestron DM products.<br>5. The analog audio port can function as an input or output, not both.<br>6. Audio from one onboard HDMI input may not be combined with video from the other onboard HDMI input.<br>7. Combining audio from one encoder with video from another encoder utilizes the secondary 2-channel audio stream. Multichannel audio from one encoder cannot be combined with video from another encoder.<br>8. The DM-NVX-351 is powerable using the 24V power pack (included) or a DM-PSU-ULTRA-MIDSPAN (sold separately).<br>9. Device control via RS-232, IR, CEC, or Ethernet requires integration with a Crestron control system.<br>10. 3D video input signals are automatically converted to 2D.<br>11. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.</p>

<p>DigitalMedia™ NVX technology transports ultra high-definition 4K video with 60 Hz frame rates and 4:4:4 color sampling over standard Gigabit Ethernet. Support for HDR video (HDR10) and HDCP 2.2 ensures the ultimate in picture quality and compatibility for all of today’s varied media sources. Using standards-based Ethernet wiring and switches, DM® NVX delivers a vastly scalable, high-performance solution for enterprise-wide 4K content distribution.[1]</p> <p>The Crestron® DM-NVX-351C is a video encoder/decoder card that installs in one slot of a DMF-CI-8 card chassis. It is designed to function as either a transmitter or receiver with the ability to switch between the two modes programmatically via commands from a Crestron control system. Featuring simple web-based control and management, USB and KVM integration, and support for copper and fiber LAN connectivity, the DM-NVX-351C offers a one-stop solution for any-sized network AV installation.[2]</p> <p>The DM-NVX-351C includes all the features of the DM-NVX-350C with the addition of surround sound to stereo downmixing. Refer to the “7.1 Surround Sound Audio with Downmixing” section below for details.</p><p> </p><p><strong>Real-Time 4K60 Video Distribution</strong><br>Engineered for demanding conference room and classroom applications, DM NVX ensures real-time, full-motion 4K60 video performance for the presentation of multimedia, videoconferencing, and live camera images. DM NVX employs high-quality JPEG 2000 encoding using a patent-pending technique that overlaps scaling and encoding latencies, achieving an ultra-low end-to-end latency of 30 ms at 60 fps, so on-screen functions such as mousing and game play are fluid and natural.</p><p> </p><p><strong>Encoder and Decoder in One</strong><br>In a single card, the DM-NVX-351C is configurable to operate as either a network AV encoder or decoder.</p> <ul><li>As an encoder, it allows the output of a switcher, computer, AirMedia® gateway, or other media source to be connected via HDMI® and then transmitted over the network.[1]</li><li>As a decoder, it receives the signal from a DM NVX encoder and feeds it to the input of a switcher or display device via the HDMI output. It can quickly and easily switch between multiple encoders on the network alongside locally-connected HDMI sources.[1]</li><li>The encoder/decoder mode can be switched on-the-fly via a control system to provide a versatile, cost-effective presentation switching solution.</li></ul><p><strong>2x1 HDMI® Auto-Switcher </strong></p><p>The DM-NVX-351C includes two HDMI inputs. Switching between the two inputs can be performed automatically using auto-switching mode, programmatically via a Crestron control system, or through a computer using a web browser.[1]</p><p> </p><p><strong>HDMI Output</strong><br>When configured as a decoder, the DM-NVX-351C’s HDMI output feeds the decoded signal to the input of a switcher, a local display device, or any other device with an HDMI input. Its built-in scaler ensures an optimal image, scaling the encoded source resolution up or down to match the native resolution of the display device. When used as an encoder, the HDMI output can be used to feed a local display, confidence monitor, or audio system.[1,3]</p><p> </p><p><strong>USB and KVM Integration</strong><br>For a complete signal management solution, DM NVX supports the extension of USB signals, which may be switched and routed alongside the AV signal or separately via the control system. USB 2.0 host and device ports are provided on each DM-NVX-351C card, allowing a USB mouse, keyboard, or other device to be connected at one DM NVX endpoint and routed to a computer or other host at any other endpoint. KVM switch functionality is a natural application for this feature, but all types of USB peripherals are supported including whiteboards, touch screens, game controllers, cameras, mobile devices, headsets, and flash drives.[4]</p> <p>USB signals can also be routed to other locations where a DM NVX endpoint does not exist using Crestron USB over Ethernet Extender Modules (USB-EXT-DM). USB signals can be freely routed between DM NVX and USB-EXT-DM units over Ethernet under the management of a Crestron control system.</p><p> </p><p><strong>7.1 Surround Sound Audio with Downmixing</strong><br>DM NVX supports the lossless transport of 7.1 surround sound audio signals, including Dolby® TrueHD, Dolby Atmos®, DTS-HD®, DTS:X®, and uncompressed linear PCM. The DM-NVX-351C includes the ability to decode the incoming multichannel surround sound signal, whether from the network or an HDMI input, and downmix that signal to stereo. The stereo downmix signal is automatically routed to the onboard analog output [5], while the HDMI output can be configured to output either stereo or multichannel. As an encoder, the DM-NVX-351C distributes both stereo and multichannel signals simultaneously over the network, allowing either signal to be selected at any decoder on the network.</p><p> </p><p><strong>Analog Audio Embedding or De-embedding </strong><br>A balanced stereo analog audio port is included, which may be configured as either an input or output. As an input, it allows a stereo audio source to be connected and combined with the video signal from either HDMI input or the incoming network video stream. As an output, it can provide a stereo line-level signal to feed a local sound system or analog audio switcher. The output volume is adjustable via a control system or web browser.[5]</p><p> </p><p><strong>Breakaway Audio</strong><br>A DM NVX decoder may select and combine separate video and audio signals from two different inputs, even two different encoders. There are just two exceptions: A) signals may not be combined between the two onboard HDMI inputs, and B) combining signals from two separate encoders is limited to 2-channel stereo audio.[6,7]</p><p> </p><p><strong>Text Overlay</strong><br>The ability to display dynamic or fixed text on screen provides a means to label the video source or display special instructions, schedules, announcements, alerts, and other messaging.</p><p> </p><strong>Video Wall Processing</strong><br>A video wall composed of up to 64 individual displays can be configured using multiple DM-NVX-351C cards. Each card provides fully-adjustable zoom capability and bezel compensation to accommodate a range of video wall configurations and display types. One DM-NVX-351C is required per display, supporting configurations of up to eight wide by up to eight high.<br> <br><strong>Key Features</strong><br><ul><li>4K60 4:4:4 video over standard Gigabit Ethernet</li><li>No latency penalty for real-time video performance</li><li>HDR (High Dynamic Range) video support (HDR10)</li><li>Dolby® TrueHD, Dolby Atmos®, DTS-HD®, DTS:X®, and uncompressed 7.1 linear PCM audio support</li><li>HDCP 2.2 compliant</li><li>Configurable as an encoder or decoder</li><li>Dual onboard RJ45 LAN ports</li><li>Option for a fiber optic network connection via SFP port [2]</li><li>Enterprise-grade security</li><li>Two auto-switching HDMI® inputs and one HDMI output [1]</li><li>Built-in 4K60 4:4:4 scaling</li><li>Onboard video wall processing</li><li>Analog audio port configurable as a balanced stereo input or output [5]</li><li>Analog audio embedding or de-embedding</li><li>Stereo downmixing of surround sound audio signals</li><li>Simultaneous distribution of stereo and surround sound signals</li><li>Audio breakaway capability [6,7]</li><li>Dynamic text overlay capability</li><li>CEC device control gateway [8]</li><li>USB and KVM signal extension and routing [4]</li><li>Easy setup via built-in webpages</li><li>Fully-controllable via a Crestron® control system</li><li>Installs in the DMF-CI-8 card chassis</li></ul> <p>1. 4K60 4:4:4 performance requires the use of HDMI cables with a minimum TMDS bandwidth of 18 Gbps, such as Crestron model CBL-HD (20 ft / 6.1 m max. length). If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables with a minimum bandwidth of 10.2 Gbps may be used, such as Crestron models CBL-HD-LOCK or CBL-HD (any available length). Performance may also be affected if an HDMI coupler is inserted in the HDMI signal path. Crestron coupling products (MP-WP150, MP-WP152, MPI-WP150, or FTA-CP-HD-101) and cable retractors (CBLR2-HD) all have a specified bandwidth of 10.2 Gbps, and thus do not support 4K60 4:4:4. Please be aware that bandwidth loss is cumulative, so the combination of multiple components inserted inline may reduce performance.<br>2. To add a fiber optic LAN port requires the purchase of a Crestron SFP-1G series SFP transceiver module (sold separately). All LAN ports on the DM-NVX-351C are for connection to an Ethernet based AV network or device; they cannot be connected to the “DM” ports of other Crestron devices.<br>3. When in encoder mode, the HDMI output resolution is matched to the resolution of the encoded source.<br>4. The DM-NVX-351C can be configured to accept the connection of a USB device or a USB host, not both. Crestron DM NVX products are engineered to deliver maximum compatibility with the widest possible range of USB products. Crestron does not guarantee that all USB products are compatible with DM NVX products. DM NVX is compatible with Crestron USB-EXT-DM products, but is not compatible with the “USB HID only” signal extender technology found in other Crestron DM products.<br>5. The analog audio port can function as an input or output, not both.<br>6. Audio from one onboard HDMI input may not be combined with video from the other onboard HDMI input.<br>7. Combining audio from one encoder with video from another encoder utilizes the secondary 2-channel audio stream. Multichannel audio from one encoder cannot be combined with video from another encoder.<br>8. Device control via CEC requires integration with a Crestron control system.<br>9. 3D video input signals are automatically converted to 2D.<br>10. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.</p>

<p>The PC-100 is a professional grade, rack-mountable power conditioner designed to provide 120 Volt AC power distribution, switching, surge protection, and noise filtering for Crestron® control systems, AV systems, computers, and other equipment. Eight switched outlets are provided on the rear panel, plus a single unswitched convenience outlet is provided on the front. All nine outlets are protected and filtered. The switched outlets are arranged in four banks of two, two of which are turn-on delayed to prevent dangerous transients during power-up.<br><br></p><strong>Power Conditioning<br></strong>A quality power conditioner is an essential component of any professional system to prevent sudden equipment failure due to lightning and electrical disturbances, to prolong the lifespan of that equipment, and to maximize overall system performance during everyday operation. The PC-100 includes the following power conditioning features:<br><ul><li><strong>Surge Protection</strong> — Provides protection against surges and spikes in the AC power line caused by lightning and other electrical disturbances</li><li><strong>Under/Over Voltage Cutoff</strong> — Shuts off power to the rear panel outlets if the line voltage strays beyond the normal operating range</li><li><strong>Thermal Breaker</strong> — Disrupts power to all outlets in case of an overload condition</li><li><strong>EMI/RFI Noise Filtering</strong> — Prevents electromagnetic and radio frequency interference that can negatively impact sound and video quality</li><li><strong>Wiring Fault Detection</strong> — Detects faulty wiring of the incoming AC power line and shuts off power to the rear panel outlets until the fault is corrected [1]</li></ul><strong>Three-Stage Sequential Turn-On Delay</strong><br>The switched outlets on the PC-100’s rear panel are arranged in four banks, with two outlets per bank. When the front panel switch is turned on, or when power is applied to the main line input following a power outage or through an externally switched circuit, the first two banks of outlets turn on immediately, the third bank turns on following a one second delay, and the fourth bank turns on following a two second delay. This ensures that the connected equipment gets powered up in proper order, preventing dangerous transients that can damage delicate components and potentially trip the main circuit breaker. It can also help to prevent audible pops and thumps through connected audio equipment at power-up.<br><p><br></p><p><strong>Protection Status Output</strong></p>A contact closure output is included to provide notification to a control system or other equipment if the internal surge protection circuit is compromised due to an extreme transient voltage surge. In the unlikely event of such a condition, the PROTECTION output presents a low-voltage contact closure signal and all power to the rear panel outlets is switched off. Protection status is also indicated via LEDs on the front panel.<br><p><br></p><p><strong>UL® 1449 Certified</strong></p><p>The PC-100 has been tested and certified by UL as compliant with the UL 1449 safety and performance standard for surge protective devices (SPD).<br></p><p></p><p>  </p><p><strong>Key Features</strong></p><ul><li>Rack-mountable power conditioner</li><li>Eight switched rear panel outlets</li><li>Three-stage sequential turn-on delay</li><li>One unswitched front panel outlet</li><li>Professional grade surge protection</li><li>UL® 1449 Type 3 Listed</li><li>Thermal breaker overload protection</li><li>Over-voltage and under-voltage cutoff</li><li>EMI and RFI noise filtering</li><li>Wiring fault detection [1]</li><li>Front panel main power switch and status indicators</li><li>Protection status contact closure output</li><li>Single-space 19 inch rack-mountable</li><li>Rated 15 Amps at 120 Volts AC</li><li>Limited Lifetime Product Warranty</li><li>Limited 5 Year Connected Equipment Protection Warranty</li></ul><p>1. Detects most input line wiring faults. Does not detect neutral/ground reversal. Does not discern between ground connections at the AC power line, chassis, or connected equipment (a ground connection at any point will be detected by the PC-100 as normal). The installer is responsible for proper wiring and grounding of this and all connected equipment according to applicable electrical codes, accepted guidelines, and best practices. Proper wiring and function of the AC power source should be verified prior to connecting the PC-100 or any other equipment. Use of this product does not negate the responsibilities of the installer and end-user to exercise all appropriate and required measures for safe and reliable installation and operation.</p>

<p>The PC-200 is a professional grade, rack-mountable power conditioner and controller designed to provide 120 Volt AC power distribution, switching, surge protection, noise filtering, and energy monitoring for Crestron® control systems, AV systems, computers, and other equipment. Eight switched outlets are provided on the rear panel, plus a single unswitched convenience outlet is provided on the front. All nine outlets are protected, filtered, and monitored. The switched outlets are arranged in four banks of two, three of which are turn-on delay-adjustable when controlled from the front panel power switch. The same three outlet banks are also individually controllable via a control system to enable selective switching of devices, on/off power sequencing, load-shedding, and other custom power control functionality.[1]<br>Built-in RMS voltage and current monitoring enables logging and reporting of the line voltage, current, power, and energy usage at the input. An external temperature sensor is included to keep tabs on heat conditions within the equipment rack or room. Network connectivity allows for setup and operation using a web browser, with extensive custom control and monitoring capabilities enabled through integration with a Crestron control system, the MyCrestron.com residential monitoring service, the Crestron Fusion® Cloud enterprise management service, or an SNMP client.[1,2]<br><br></p><strong>Power Conditioning<br></strong>A quality power conditioner is an essential component of any professional system to prevent sudden equipment failure due to lightning and electrical disturbances, to prolong the lifespan of that equipment, and to maximize overall system performance during everyday operation. The PC-200 includes the following power conditioning features:<br><ul><li><strong>Surge Protection</strong> — Provides protection against surges and spikes in the AC power line caused by lightning and other electrical disturbances</li><li><strong>Under/Over Voltage Cutoff</strong> — Shuts off power to the rear panel outlets if the line voltage strays beyond the normal operating range, which is adjustable on the PC-200</li><li><strong>Thermal Breaker</strong> — Disrupts power to all outlets in case of an overload condition</li><li><strong>EMI/RFI Noise Filtering</strong> — Prevents electromagnetic and radio frequency interference that can negatively impact sound and video quality</li><li><strong>Wiring Fault Detection</strong> — Detects faulty wiring of the incoming AC power line and shuts off power to the rear panel outlets until the fault is corrected [3]</li></ul><p><strong>Four-Stage Adjustable Turn-On Delay</strong><br>The switched outlets on the PC-200’s rear panel are arranged in four banks, with two outlets per bank. When operated by its front panel power switch, the first bank turns on immediately while the other three banks can be configured to turn on in any order according to the delay time set for each bank. Each bank is independently adjustable to provide up to 10 seconds of delay before turning on, ensuring that the connected equipment gets powered up in proper order with sufficient time for each piece to stabilize. This helps to prevent dangerous transients that can damage delicate components and potentially trip the main circuit breaker. It can also help to prevent audible pops and thumps through connected audio equipment at power-up. Delayed turn-on is initiated by turning on the front panel power switch, or by applying power to the main line input following a power outage or through an externally switched circuit.<br><br></p><p><strong>Three Remote-Controllable Switched Outlet Banks</strong><br>When connected to a local area network, three of the four outlet banks on the PC-200’s rear panel can be turned on or off independently using a web browser or control system. The other bank is always on as long as the front panel switch is turned on. This energy-saving feature allows select components to be powered down when not needed. Through integration with a control system, custom functionality can be programmed to enable control from a touch screen, keypad, remote, or mobile device. Sequential power-up and power-down functionality can be enabled through programming of the control system. For systems employing a backup generator or UPS, load-shedding can be performed to shut down unnecessary components during a power outage.[1]<br><br></p><strong>Energy Monitoring<br></strong>By sensing the incoming line voltage and the total device load, the PC-200 facilitates a host of solutions for monitoring, automating, and troubleshooting a system.<br><ul><li>Voltage monitoring allows fluctuations in the power line to be tracked and logged, helping to identify and document problems with the power utility or building wiring.</li><li>Energy monitoring provides the real power consumption (watts), current draw (amps), and energy usage (watt-hours) for all of the connected devices combined.</li><li>By connecting and testing one component at a time, the PC-200 allows power-hungry equipment to be identified and replaced with more efficient equipment.</li><li>High inrush current devices can be identified to assist in optimizing the configuration of power sequencing schemes.</li><li>Overall energy usage can be tracked and logged to identify trends and reform energy-wasting behaviors.</li><li>System usage can be tracked to inform the scheduling of maintenance and future purchasing decisions.</li><li>An alert notification can be sent if there’s a sudden or abnormal drop in current draw, potentially indicating a device has been shut off improperly or disconnected due to theft (effective only when outlets are switched on).</li></ul><p><strong>Ambient Temperature Sensing</strong></p><p>The PC-200 offers a complete equipment protection solution by monitoring the ambient temperature within the equipment cabinet or room to prevent overheating. The included temperature sensor connects to the rear of the PC-200 and features a choice of magnetic or adhesive mounting for easy placement within a typical equipment rack enclosure. The over-temperature cutoff threshold can be set to shut down power to the system if conditions exceed a safe operating temperature. Through a control system, the temperature measurement can be utilized to regulate the operation of cooling fans or air-conditioning equipment to keep equipment running cool.</p><p><strong>Ping Monitoring</strong></p><p>No matter how well a system is designed and programmed, even the finest control system or computer has the potential to lock up and stop responding once in a while. The PC-200 can be configured to detect an unresponsive device by sending it a ping command at regular intervals. If the ping request is not returned after four tries, the outlet bank feeding the monitored device cycles off and on to reboot the device, quickly restoring normal operation without any human intervention.</p><p><strong>Remote Management & Control</strong><br></p><p>The PC-200 integrates neatly into any system or facility. Used alone, it can be set up and managed through a web browser. It can also be configured to send email notifications in case of certain specified events. Integration with the MyCrestron.com residential monitoring service provides a cloud based solution for homeowners to monitor and manage the PC-200 as part of a complete Crestron home automation system. Or, Crestron Fusion Cloud provides an enterprise solution for corporations and universities to manage rooms using the PC-200 throughout a building or campus. Built-in SNMP support enables integration with third-party IT management software, allowing network administrators to manage one or many networked PC-200s in an IT-friendly format. And of course, the PC-200 can be integrated with a Crestron control system via Ethernet or Cresnet® to enable control and monitoring through a touch screen, handheld remote, or mobile device.[1,2]</p><p><strong>Key Features</strong><br></p><ul><li>Rack-mountable power conditioner and controller</li><li>Eight switched rear panel outlets, arranged in banks of two</li><li>Adjustable turn-on delay and remote switching per each of three banks</li><li>One unswitched front panel outlet</li><li>Built-in current sensing and energy monitoring</li><li>Line voltage monitoring</li><li>Professional grade surge protection</li><li>UL® 1449 Type 3 Listed</li><li>Thermal breaker overload protection</li><li>Adjustable over-voltage and under-voltage cutoff</li><li>EMI and RFI noise filtering</li><li>Wiring fault detection [3]</li><li>Ambient temperature sensing and over-temperature cutoff</li><li>Ping monitoring (device lockup detection and reboot)</li><li>Built-in energy usage and event logging</li><li>Front panel main power switch and status indicators</li><li>Easy setup and operation via web browser</li><li>Crestron® control system integration via Ethernet or Cresnet®</li><li>Remote management via MyCrestron.com, Crestron Fusion® Cloud, or SNMP [2]</li><li>Single-space 19 inch rack-mountable</li><li>Rated 15 Amps at 120 Volts AC</li><li>Limited Lifetime Product Warranty</li><li>Limited 5 Year Connected Equipment Protection Warranty</li></ul><p>1. Crestron control system and custom programming sold separately.<br>2. Email notification and direct integration with MyCrestron.com, Crestron Fusion, and SNMP will be enabled through a future firmware update. Alternately, these services can be integrated now through a Crestron control system with custom programming.<br>3. Detects most input line wiring faults. Does not detect neutral/ground reversal. Does not discern between ground connections at the AC power line, chassis, or connected equipment (a ground connection at any point will be detected by the PC-200 as normal). The installer is responsible for proper wiring and grounding of this and all connected equipment according to applicable electrical codes, accepted guidelines, and best practices. Proper wiring and function of the AC power source should be verified prior to connecting the PC-200 or any other equipment. Use of this product does not negate the responsibilities of the installer and end-user to exercise all appropriate and required measures for safe and reliable installation and operation.</p>

<p>The PC-300 is a professional grade, rack-mountable power conditioner and controller designed to provide 120 Volt AC power distribution, switching, surge protection, noise filtering, and energy monitoring for Crestron® control systems, AV systems, computers, and other equipment. Eight individually-switched outlets are provided on the rear panel, plus a single unswitched convenience outlet is provided on the front. All nine outlets are protected, filtered, and monitored. The switched outlets are each turn-on delay-adjustable when controlled from the front panel power switch. The switched outlets are also individually controllable via a control system to enable independent switching of devices, on/off power sequencing, load-shedding, and other custom power control functionality.[1]</p><p>Built-in RMS voltage and current monitoring enables logging and reporting of line voltage fluctuations at the input, as well as current, power, and energy usage at each outlet. An external temperature sensor is included to keep tabs on heat conditions within the equipment rack or room. Network connectivity allows for setup and operation using a web browser, with extensive custom control and monitoring capabilities enabled through integration with a Crestron control system, the MyCrestron.com residential monitoring service, the Crestron Fusion® Cloud enterprise management service, or an SNMP client.[1,2] Setup and operation can also be performed through the LCD front panel.</p><p> </p><strong>Power Conditioning<br></strong>A quality power conditioner is an essential component of any professional system to prevent sudden equipment failure due to lightning and electrical disturbances, to prolong the lifespan of that equipment, and to maximize overall system performance during everyday operation. The PC-300 includes the following power conditioning features:<br><ul><li><strong>Surge Protection</strong> — Provides protection against surges and spikes in the AC power line caused by lightning and other electrical disturbances</li><li><strong>Under/Over Voltage Cutoff</strong> — Shuts off power to the rear panel outlets if the line voltage strays beyond the normal operating range, which is adjustable on the PC-300</li><li><strong>Thermal Breaker</strong> — Disrupts power to all outlets in case of an overload condition</li><li><strong>EMI/RFI Noise Filtering</strong> — Prevents electromagnetic and radio frequency interference that can negatively impact sound and video quality</li><li><strong>Wiring Fault Detection</strong> — Detects faulty wiring of the incoming AC power line and shuts off power to the rear panel outlets until the fault is corrected [3]</li></ul> <p><strong>Eight-Stage Adjustable Turn-On Delay</strong><br>When operated by its front panel power switch, the PC-300 allows each of its rear panel outlets to turn on in any order according to the delay time set for each outlet. Each outlet is individually adjustable to provide up to 10 seconds of delay before turning on, ensuring that the connected equipment gets powered up in proper order with sufficient time for each piece to stabilize. This helps to prevent dangerous transients that can damage delicate components and potentially trip the main circuit breaker. It can also help to prevent audible pops and thumps through connected audio equipment at power-up. Delayed turn-on is initiated by turning on the front panel power switch, or by applying power to the main line input following a power outage or through an externally switched circuit.<br><br></p><p><strong>Eight Remote-Controllable Switched Outlets</strong><br>Any of the PC-300’s eight rear panel outlets can be turned on or off individually through the front panel LCD screen or over the network using a web browser or control system. This energy-saving feature allows select components to be powered down when not needed. Through integration with a control system, custom functionality can be programmed to enable control from a touch screen, keypad, remote, or mobile device. Sequential power-up and power-down functionality can be enabled through programming of the control system, with select outlets designated as always on. For systems employing a backup generator or UPS, load-shedding can be performed to shut down unnecessary components during a power outage.[1]</p><p> </p><strong>Energy Monitoring</strong><br>By sensing the incoming line voltage and individual device loads, the PC-300 facilitates a host of solutions for monitoring, automating, and troubleshooting a system.<br><ul><li>Voltage monitoring allows fluctuations in the power line to be tracked and logged, helping to identify and document problems with the power utility or building wiring.</li><li>Energy monitoring per outlet provides the real power consumption (watts), current draw (amps), and energy usage (watt-hours) for each connected device.</li><li>Allows power-hungry equipment to be identified and replaced with more efficient equipment.</li><li>High inrush current devices can be identified to assist in optimizing the configuration of power sequencing schemes.</li><li>Overall energy usage can be tracked and logged to identify trends and reform energy-wasting behaviors.</li><li>Individual device usage can be tracked to inform the scheduling of maintenance and future purchasing decisions.</li><li>The power state of an IR controlled device can often be determined by sensing its AC current draw, ensuring it’s on when it should be on.</li><li>An alert notification can be sent if there’s a sudden or abnormal drop in current draw, potentially indicating a device has been shut off improperly or disconnected due to theft (effective only when outlets are switched on).</li></ul><p> </p><p><strong>Ambient Temperature Sensing</strong><br>The PC-300 offers a complete equipment protection solution by monitoring the ambient temperature within the equipment cabinet or room to prevent overheating. The included temperature sensor connects to the rear of the PC-300 and features a choice of magnetic or adhesive mounting for easy placement within a typical equipment rack enclosure. The over-temperature cutoff threshold can be set to shut down power to the system if conditions exceed a safe operating temperature. Through a control system, the temperature measurement can be utilized to regulate the operation of cooling fans or air-conditioning equipment to keep equipment running cool.</p> <p><strong>Ping Monitoring</strong><br>No matter how well a system is designed and programmed, even the finest control system or computer has the potential to lock up and stop responding once in a while. The PC-300 can be configured to detect an unresponsive device by sending it a ping command at regular intervals. If the ping request is not returned after four tries, the outlet feeding the monitored device cycles off and on to reboot the device, quickly restoring normal operation without any human intervention.</p> <p><strong>Built-In Logging</strong><br>Events such as power surges, over/under voltage conditions, over-temperature conditions, ping failures, outlet switching activity, and sudden changes in current draw (indicative of a device being improperly shut off or disconnected) can all be logged as they occur to document the time and cause of problems and to track device usage. All sensor readings are logged at a configurable interval as short as five seconds providing a minimum of one week’s worth of data. Logs can be retrieved periodically to record a detailed history of events and energy usage over time.</p> <strong>UL® 1449 Certified</strong><br>The PC-300 has been tested and certified by UL as compliant with the UL 1449 safety and performance standard for surge protective devices (SPD).<br>  <br><strong>Key Features</strong><br><ul><li>Rack-mountable power conditioner and controller</li><li>Eight individual-switched rear panel outlets</li><li>Adjustable turn-on delay and local/remote switching per outlet</li><li>One unswitched front panel outlet</li><li>Built-in current sensing and energy monitoring per outlet</li><li>Line voltage monitoring</li><li>Professional grade surge protection</li><li>UL® 1449 Type 3 Listed</li><li>Thermal breaker overload protection</li><li>Adjustable over-voltage and under-voltage cutoff</li><li>EMI and RFI noise filtering</li><li>Wiring fault detection [3]</li><li>Ambient temperature sensing and over-temperature cutoff</li><li>Ping monitoring (device lockup detection and reboot)</li><li>Built-in energy usage and event logging</li><li>Front panel main power switch, status indicators, and color LCD</li><li>Easy setup and operation via front panel or web browser</li><li>Crestron® control system integration via Ethernet or Cresnet®</li><li>Remote management via MyCrestron.com, Crestron Fusion® Cloud, or SNMP [2]</li><li>Single-space 19 inch rack-mountable</li><li>Rated 15 Amps at 120 Volts AC</li><li>Limited Lifetime Product Warranty</li><li>Limited 5 Year Connected Equipment Protection Warranty</li></ul> <p>1. Crestron control system and custom programming sold separately.<br>2. Email notification and direct integration with MyCrestron.com, Crestron Fusion, and SNMP will be enabled through a future firmware update. Alternately, these services can be integrated now through a Crestron control system with custom programming.<br>3. Detects most input line wiring faults. Does not detect neutral/ground reversal. Does not discern between ground connections at the AC power line, chassis, or connected equipment (a ground connection at any point will be detected by the PC-300 as normal). The installer is responsible for proper wiring and grounding of this and all connected equipment according to applicable electrical codes, accepted guidelines, and best practices. Proper wiring and function of the AC power source should be verified prior to connecting the PC-300 or any other equipment. Use of this product does not negate the responsibilities of the installer and end-user to exercise all appropriate and required measures for safe and reliable installation and operation.</p>

<p>The flagship Crestron® PRO3 is an enterprise-class control system with an enhanced feature set including a front panel color LCD display, built-in control card expansion slots, and a dedicated Control Subnet port. Featuring the 3-Series® control engine, the PRO3 forms the core of any modern networked home or commercial building, managing and integrating all the disparate technologies throughout your facility to make life easier, greener, more productive, and more enjoyable.<br></p><p> <br>3-Series® Control Systems<br>Today's commercial buildings and custom homes comprise more technology than ever before, and all these systems need to be networked, managed, and controlled in fundamentally new ways. The IP based 3-Series platform is engineered from the ground up to deliver a network-grade server appliance capable of faithfully handling everything from boardroom AV and home theater control to total building management.</p> <p>3-Series embodies a distinctively robust, dynamic, and secure platform to elevate your system designs to higher levels of performance and reliability. Compared to other control systems, Crestron 3-Series provides a pronounced increase in processing power and speed with more memory, rock solid networking and IP control, and a unique modular programming architecture.<br> <br>Modular Programming Architecture<br>Designed for enhanced scalability, the PRO3 affords high-speed, real-time multi-tasking to seamlessly run multiple programs simultaneously. This exclusive modular programming architecture lets programmers independently develop and run device-specific programs for AV, lighting, shades, HVAC, security, etc., allowing for the optimization of each program, and allowing changes to be made to one program without affecting the whole. Even as your system grows, processing resources can easily be shifted from one 3-Series processor to another without rewriting any code. The end benefit is dramatically simplified upgradability with minimal downtime, whether implementing changes on site or remotely via the network.<br><br></p><p>Robust Ethernet & IP Control<br>IP technology is the heart of 3-Series, so it should be no surprise that its networking abilities are second to none. Gigabit Ethernet connectivity enables integration with IP-controllable devices and allows the PRO3 to be part of a larger managed control network. Whether residing on a sensitive corporate LAN, a home network, or accessing the Internet through a cable modem, the PRO3 provides secure, reliable interconnectivity with IP-enabled touch screens, computers, mobile devices, video displays, media servers, security systems, lighting, HVAC, and other equipment — whether on premises or across the globe.<br><br></p><p><br></p><p>Dedicated Control Subnet<br>The Crestron Control Subnet is a Gigabit Ethernet network dedicated to Crestron devices. Via the PRO3's Control Subnet port, an installer may simply connect a single touch screen or wireless gateway, or add a Crestron PoE switch (CEN-SW-POE-5 or CEN-SWPOE-16) [1] to handle multiple touch screens, gateways, AV components, and other devices. Auto-configuration of the entire subnet is performed by the PRO3, discovering each device and assigning IP addresses without any extra effort from the installer.<br>A separate LAN port on the PRO3 provides a single-point connection to the primary LAN, requiring just one IP address for the complete control system. The LAN port allows full interconnectivity between devices on the local subnet with other devices, systems, servers, and WAN/Internet connections outside the local subnet. For sensitive applications that require absolute security, the entire Control Subnet can be completely hidden from the primary LAN using Isolation Mode.<br><br></p><p>Control Apps & XPanel<br>Years ago, Crestron pioneered the world's first IP-based control system unleashing vast new possibilities for controlling, monitoring, and managing integrated systems over a LAN, WAN, and the Internet. Today, Crestron offers more ways than ever to control your world the way you want. Using a computer, smartphone, or tablet device, Crestron lets you control anything in your home or workplace from anywhere in the world.<br><br></p><p>Native to every 3-Series control system, Crestron XPanel technology transforms any laptop or desktop computer into a virtual Crestron touch screen. Crestron control apps deliver the Crestron touch screen experience to iPhone®, iPad®, and Android™ devices, letting you safely monitor and control your entire residence or commercial facility using the one device that goes with you everywhere.<br><br></p><p>Crestron Fusion® Cloud<br>Crestron Fusion Cloud provides an integrated platform for creating truly smart buildings that save energy, enhance worker productivity, and prolong the life-span of valuable equipment. As part of a complete managed network in a corporate enterprise, college campus, convention center, or any other facility, the PRO3 works integrally with Crestron Fusion Cloud to enable remote scheduling, monitoring, and control of rooms and technology from a central help desk. It also enables organizations to reduce energy consumption by tracking real-time usage and automating control of lighting, shades, and HVAC.<br><br></p><p>SNMP Support<br>Built-in SNMP support enables integration with third-party IT management software, allowing network administrators to manage and control Crestron systems on the network in an IT-friendly format.<br><br></p><p>Cresnet®<br>Cresnet provides a dependable network wiring solution for Crestron keypads, lighting controls, shade motors, thermostats, occupancy sensors, and other devices that don't require the higher speed of Ethernet. The Cresnet bus offers easy wiring and configuration, carrying bidirectional communication and 24VDC power to each device over a simple 4-conductor cable. To assist with troubleshooting, the PRO3 includes our patent-pending Network Analyzer which continuously monitors the integrity of the Cresnet network for wiring faults, marginal performance, and other errors.<br><br></p><p>Onboard Control Ports<br>In addition to Ethernet, the PRO3 includes six bidirectional COM ports and eight IR ports to interface directly with all of your centralized AV sources, video displays, and other devices. Eight programmable relay ports are included for controlling projection screens, lifts, power controllers, and other contact-closure actuated equipment. Eight "Versiport" I/O ports enable the integration of power sensors, motion detectors, door switches, alarms, or anything else that provides a dry contact closure, low-voltage logic, or 0-10 Volt DC signal.<br><br></p><p>Control Card Expansion Slots<br>Additional control ports can be added to the PRO3 using 3-Series Control Cards [1]. The PRO3 provides three control card expansion slots on its rear panel, affording great expansion capability without requiring any additional rack space.<br><br></p><p>Front Panel Color LCD Display<br>The PRO3's front panel includes a color LCD display to enable extensive setup and diagnostics without having to connect a computer.<br><br></p><p>BACnet™/IP<br>Native support for the BACnet/IP communication protocol provides a direct interface to third-party building management systems over Ethernet, simplifying integration with HVAC, security, fire & life safety, voice & data, lighting, shades, and other systems. Using BACnet/IP, each system runs independently with the ability to communicate together on one platform for a truly smart building.[2]<br>  <br><strong>Key Features</strong><br></p><ul><li>Enterprise-class control system</li><li>3-Series® Control Engine — substantially faster and more powerful than other control systems</li><li>Exclusive modular programming architecture</li><li>Onboard 1GB RAM & 4GB Flash memory</li><li>Expandable storage up to 1TB</li><li>Rear panel memory card slot</li><li>High-speed USB 2.0 host port</li><li>Industry-standard Ethernet and Cresnet® wired communications</li><li>Control Subnet — provides a dedicated local network for Crestron® devices</li><li>XPanel with Smart Graphics™ computer and web based control</li><li>iPhone®, iPad®, and Android™ control app support</li><li>Crestron Fusion® Cloud Enterprise Management Service support</li><li>SNMP remote management support</li><li>Two RS-232/422/485 COM ports with hardware and software handshaking</li><li>Four RS-232 COM ports with software handshaking only</li><li>Eight IR/serial, eight relay, and eight Versiport I/O ports</li><li>Three built-in 3-Series control card expansion slots</li><li>Programmable event scheduling with astronomical time clock</li><li>Native BACnet™/IP support [2]</li><li>IEC 61000-4-5 Installation Class 4 surge immunity on COM, Versiport, and network connections [3]</li><li>Installer setup via front panel, Crestron Toolbox™ software, or web browser</li><li>C#, symbol based, and drag-and-drop programming environments</li><li>Full Unicode (multi-language) support</li><li>Increased network throughput and security</li><li>Secure access through full user/group management or Active Directory integration</li><li>Hardware level security using 802.1X authentication</li><li>TLS, SSL, SSH, and SFTP network security protocols</li><li>FIPS 140-2 compliant encryption</li><li>IIS v.6.0 Web Server</li><li>IPv6 ready</li><li>Front panel color LCD display for setup and diagnostics</li><li>Front panel USB computer console port</li><li>2-space rack-mountable</li></ul><p></p> <p>1. Item(s) sold separately.<br>2. License required. The PRO3 supports a maximum of 2000 BACnet objects when dedicated for BACnet use only. Actual capabilities are contingent upon the overall program size and complexity.<br>3. The following connections comply with IEC 61000-4-5 Installation Class 4 surge immunity levels: COM 1 - 6, I/O 1 - 8, NET, LAN, and CONTROL SUBNET.</p>

<p>The DMPS3-4K-150-C from Crestron® provides an ultra high-definition presentation switcher and control solution that’s perfect for huddle rooms, conference rooms, and classrooms. It integrates the control system, multi-format switcher, 4K video scaler, mic preamp, and audio DSP all into one compact device that mounts conveniently under a conference table or in an equipment rack. Built-in Crestron Connect It™ functionality affords a complete collaboration solution that’s easy and affordable to deploy in any small to medium sized meeting space. Without requiring any programming, the DMPS3-4K-150-C is easily configurable for a variety of media presentation applications.<br><br></p> <p>Auto-switching HDMI®, VGA, and analog audio inputs provide the essential connectivity needed to manage multiple computers and other media sources. A full-featured microphone input is also included for applications requiring high-quality speech reinforcement. The selected input source and microphone can be mixed and routed to one HDMI output and one stereo analog audio output. Additional DigitalMedia 8G+® inputs and output afford a streamlined, long-distance wiring solution for remote sources, for the display device, and for facility-wide integration as part of a larger media distribution system. Built-in 4K scaling ensures the highest possible image quality, and compatibility with the widest range of sources and displays.</p> <p><strong>4K Ultra HD<br></strong>The DMPS3-4K-150-C handles 4K and Ultra HD video signals, which is essential to ensure support for the latest generation of computers and monitors with native resolutions beyond 1080p and WUXGA.</p> <p><strong>Crestron Connect It™</strong><br></p> <p>Crestron Connect It is a cost-effective, simple-to-use presentation solution that provides tabletop BYOD connectivity and one-touch control for multiple participants around a conference table. Simply add up to four Crestron Connect It Cable Caddies (TT-100 series [1]) to the DMPS3-4K-150-C. Its auto-switching inputs support individual HDMI, VGA, and analog audio connections at each cable caddy. Four USB ports on the DMPS3-4K-150-C provide power and communications for each cable caddy.<br>A fully functional Crestron Connect It system is enabled right out of the box by simply connecting the cable caddies and input cables. Additional settings and AV adjustments are available through a simple web browser setup screen. In addition to the Crestron Connect It devices, the DMPS3-4K-150-C can also accommodate two DM® transmitters, one DM receiver, and an AirMedia® Presentation Gateway without any additional programming.[1,2]<br>No Programming Required!<br>Installing the DMPS3-4K-150-C is easy, fast, and affordable. Built-in .AV Framework™ technology delivers a fully-functional presentation system with simplified configuration and a choice of control options and other add-ons. For complete details on the capabilities supported by .AV Framework, please visit: www.crestron.com/avframework.[3]<br>  <br><strong>Key Features</strong></p><ul><li>Ultra high-definition, multi-format presentation switcher, scaler, mic preamp, audio DSP, and control system</li><li>Out of the box Crestron Connect It™ collaboration system functionality</li><li>Supports up to four TT-100 series Crestron Connect It Cable Caddies [1]</li><li>Built-in .AV Framework™ delivers a fully-functional system without any programming [3]</li><li>Integrated 3-Series Control System® allows fully-programmable room control</li><li>Includes four auto-switching HDMI®, VGA, and stereo analog audio inputs [6]</li><li>Includes two DM 8G+® inputs</li><li>Also supports Dual-Mode DisplayPort, DVI, HDBaseT®, and analog video sources [4,5]</li><li>Input auto-detection configures each input automatically</li><li>QuickSwitch HD™ technology manages HDCP keys for fast, reliable switching</li><li>Auto-Locking® technology achieves rapid switching between disparate sources</li><li>Performs automatic AV signal format management via EDID</li><li>Provides adjustable input level compensation on each audio input</li><li>Includes a single microphone input with EQ, gating, and compression</li><li>Provides parallel HDMI and DM 8G+ outputs for one or more display devices</li><li>DigitalMedia 8G+® connectivity enables long-distance wiring over CAT type twisted pair cable [9]</li><li>Integrates seamlessly with DigitalMedia™ matrix switchers to allow facility-wide signal distribution</li><li>HDBaseT Certified — Enables direct connection to other HDBaseT certified equipment</li><li>Features a built-in, high-performance 4K scaler</li><li>Upscales input signals to match the native resolution of any screen — including 4K and Ultra HD displays!</li><li>Downscales 4K, UHD, and ultra high-resolution computer signals to fit 1080p and other lower-resolution displays</li><li>Handles any input resolution from standard NTSC 480i or PAL 576i, to UHD and 4K</li><li>Provides intelligent frame rate conversion, content-adaptive noise reduction, and motion-adaptive de-interlacing</li><li>Provides 3D to 2D signal conversion, and passes 3D video (without scaling) to 3D displays [7]</li><li>Provides a balanced stereo audio output with graphic EQ, limiting, and delay</li><li>Enables analog-to-HDMI audio embedding and de-embedding [6]</li><li>Handles Dolby® TrueHD, Dolby Atmos®, DTS-HD®, and uncompressed 7.1 linear PCM audio [8]</li><li>Enables USB signal routing via DM transmitters and receivers or USB-EXT-DM extenders [10]</li><li>Includes onboard IR, RS-232, relay, digital input, and Cresnet® control ports</li><li>Supports Crestron® touch screens, keypads, and wireless remotes</li><li>Supports XPanel with Smart Graphics® computer and web based control</li><li>Supports iPhone®, iPad®, and Android™ control apps</li><li>Supports universal remotes via built-in RC-5 compatible IR receiver</li><li>Communicates natively with Crestron Fusion®</li><li>Enables IT-friendly network integration via SNMP</li><li>Integrated Ethernet switch provides a single-point LAN connection</li><li>Private Network Mode — requires just one IP address for the complete system</li><li>Includes front panel controls for switching and volume adjustment</li><li>Includes customizable front panel label strips</li><li>Allows complete AV setup and adjustment via a web browser</li><li>Features an internal universal power supply for worldwide compatibility</li><li>Furnishes power to PoDM and HDBaseT PoE powered devices</li><li>Mounts under the table or in a single 19” rack space</li></ul> <p>1. Item(s) sold separately.<br>2. The AirMedia Presentation Gateway, model AM-101, requires one HDMI input on the DMPS3-4K-150-C.<br>3. Some features and functions described in this spec sheet may not be supported using .AV Framework. For a complete list of capabilities and options supported by .AV Framework, please visit: www.crestron.com/avframework.<br>4. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.<br>5. The VGA inputs can accept component, composite, and S-Video signals using an appropriate adapter (not included). However, input sync detection is not provided for composite or S-Video signal types.<br>6. When using an analog audio input in combination with an HDMI video input, the source’s video resolution must be 1920x1200 or lower. The analog audio input will not pass audio if the source’s video resolution is higher than 1920x1200.<br>7. Automatically passes 3D video if the display device supports it (reverts to pass-through mode without scaling). Provides automatic 3D-to-2D conversion (with scaling) if the display device does not support 3D.<br>8. Routing of a multichannel audio signal via a digital input and output (HDMI or DM) requires the input to be set for “mixer bypass” mode. When that input is selected, all audio controls on the digital output are disabled and the ability to route the microphone signal to that output is defeated. Mixer bypass mode also disables the Input Compensation control on that input.<br>9. The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “DM 8G+ & HDBaseT Maximum Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.<br>10. Manages the routing of USB HID signals between peripheral DM devices that are equipped with USB HID ports. The USB ports onboard the DMPS3-4K-150-C are not usable for USB signal routing. Also programmable to manage the routing of USB signals between Crestron USB over Ethernet Extender modules (USB-EXT-DM, sold separately). Refer to the USB-EXT-DM spec sheet for more information.<br>11. License required. The DMPS3-4K-150-C supports a maximum of 500 BACnet objects when dedicated for BACnet use only. Actual capabilities are contingent upon the overall program size and complexity.<br>12. Due to the inherent power loss that occurs over CATx cable, a maximum of 12.95 Watts is delivered at each PoDM or HDBaseT PoE powered device. Any wiring that is connected to a PoDM or HDBaseT PoE PSE port is for intra-building use only and should not be connected to a line that runs outside of the building in which the PSE is located.</p> <p></p>

<p>The DMPS3-4K-100-C from Crestron® provides an ultra high-definition presentation switcher and control solution that’s perfect for huddle rooms, conference rooms, and classrooms. It integrates the control system, multi-format switcher, 4K video scaler, mic preamp, and audio DSP all into one compact device that mounts conveniently under a conference table or in an equipment rack. Built-in Crestron Connect It™ functionality affords a complete collaboration solution that’s easy and affordable to deploy in any small to medium sized meeting space. Without requiring any programming, the DMPS3-4K-100-C is easily configurable for a variety of media presentation applications.<br></p> <p>Auto-switching HDMI®, VGA, and analog audio inputs provide the essential connectivity needed to manage multiple computers and other media sources. A full-featured microphone input is also included for applications requiring high-quality speech reinforcement. The selected input source and microphone can be mixed and routed to one HDMI output and one stereo analog audio output. Additionally, its DigitalMedia 8G+® output affords a streamlined, long-distance wiring solution for the display device, and for facility-wide integration as part of a larger media distribution system. Built-in 4K scaling ensures the highest possible image quality, and compatibility with the widest range of sources and displays.<br><br></p> <p><strong>4K Ultra HD<br></strong>The DMPS3-4K-100-C handles 4K and Ultra HD video signals, which is essential to ensure support for the latest generation of computers and monitors with native resolutions beyond 1080p and WUXGA.<br><br></p> <p><strong>Crestron Connect It™<br></strong>Crestron Connect It is a cost-effective, simple-to-use presentation solution that provides tabletop BYOD connectivity and one-touch control for multiple participants around a conference table. Simply add up to four Crestron Connect It Cable Caddies (TT-100 series [1]) to the DMPS3-4K-100-C. Its auto-switching inputs support individual HDMI, VGA, and analog audio connections at each cable caddy. Four USB ports on the DMPS3-4K-100-C provide power and communications for each cable caddy.<br>A fully functional Crestron Connect It system is enabled right out of the box by simply connecting the cable caddies and input cables. Additional settings and AV adjustments are available through a simple web browser setup screen. In addition to the Crestron Connect It devices, the DMPS3-4K-100-C can also accommodate a single DM® receiver and an AirMedia® Presentation Gateway without any additional programming.[1,2]<br><br></p> <p><strong>No Programming Required!</strong><br>Installing the DMPS3-4K-100-C is easy, fast, and affordable. Built-in .AV Framework™ technology delivers a fully-functional presentation system with simplified configuration and a choice of control options and other add-ons. .[3]<br><br></p> <p><strong>Multi-Format Auto-Switcher</strong><br>The DMPS3-4K-100-C provides high-performance automatic switching between four groups of inputs, each including HDMI, VGA, and unbalanced stereo audio. The HDMI inputs are compatible with DVI and Dual-Mode DisplayPort sources, and the VGA inputs can handled RGB, composite, S-Video, and component video sources. Digital audio is supported by the HDMI inputs, plus each analog audio input may be used in combination with its corresponding VGA or HDMI video input. Input auto-detection eliminates the need to configure the inputs – simply connect your source and the DMPS3-4K-100-C selects the right audio and video combination. The switched video signal is routed to one HDMI output and one DM 8G+® output simultaneously. The DM 8G+ output is compatible with HDBaseT®.[4,5,6]<br>  </p><p><strong>Key Features</strong></p> <ul><li>Ultra high-definition, multi-format presentation switcher, scaler, mic preamp, audio DSP, and control system</li><li>Out of the box Crestron Connect It™ collaboration system functionality</li><li>Supports up to four TT-100 series Crestron Connect It Cable Caddies [1]</li><li>Built-in .AV Framework™ delivers a fully-functional system without any programming [3]</li><li>Integrated 3-Series Control System® allows fully-programmable room control</li><li>Includes four auto-switching HDMI®, VGA, and stereo analog audio inputs [6]</li><li>Also supports Dual-Mode DisplayPort, DVI, and analog video sources [4,5]</li><li>Input auto-detection configures each input automatically</li><li>QuickSwitch HD™ technology manages HDCP keys for fast, reliable switching</li><li>Auto-Locking® technology achieves rapid switching between disparate sources</li><li>Performs automatic AV signal format management via EDID</li><li>Provides adjustable input level compensation on each audio input</li><li>Includes a single microphone input with EQ, gating, and compression</li><li>Provides parallel HDMI and DM 8G+® outputs for one or more display devices</li><li>DigitalMedia 8G+® connectivity enables long-distance wiring over CAT type twisted pair cable [9]</li><li>Integrates seamlessly with DigitalMedia™ matrix switchers to allow facility-wide signal distribution</li><li>HDBaseT® Certified — Enables direct connection to an HDBaseT certified display device</li><li>Features a built-in, high-performance 4K scaler</li><li>Upscales input signals to match the native resolution of any screen — including 4K and Ultra HD displays!</li><li>Downscales 4K, UHD, and ultra high-resolution computer signals to fit 1080p and other lower-resolution displays</li><li>Handles any input resolution from standard NTSC 480i or PAL 576i, to UHD and 4K</li><li>Provides intelligent frame rate conversion, content-adaptive noise reduction, and motion-adaptive de-interlacing</li><li>Provides 3D to 2D signal conversion, and passes 3D video (without scaling) to 3D displays [7]</li><li>Provides a balanced stereo audio output with graphic EQ, limiting, and delay</li><li>Enables analog-to-HDMI audio embedding and de-embedding [6]</li><li>Handles Dolby® TrueHD, Dolby Atmos®, DTS-HD®, and uncompressed 7.1 linear PCM audio [8]</li><li>Includes onboard IR, RS-232, and Cresnet® control ports</li><li>Supports Crestron® touch screens, keypads, and wireless remotes</li><li>Supports XPanel with Smart Graphics® computer and web based control</li><li>Supports iPhone®, iPad®, and Android™ control apps</li><li>Supports universal remotes via built-in RC-5 compatible IR receiver</li><li>Communicates natively with Crestron Fusion®</li><li>Enables IT-friendly network integration via SNMP</li><li>Integrated Ethernet switch provides a single-point LAN connection</li><li>Private Network Mode — requires just one IP address for the complete system</li><li>Includes front panel controls for switching and volume adjustment</li><li>Includes customizable front panel label strips</li><li>Allows complete AV setup and adjustment via a web browser</li><li>Features an internal universal power supply for worldwide compatibility</li><li>Furnishes power to PoDM and HDBaseT PoE powered devices</li><li>Mounts under the table or in a single 19” rack space</li></ul> <p>1. Item(s) sold separately.<br>2. The AirMedia Presentation Gateway, model AM-101, requires one HDMI input on the DMPS3-4K-100-C.<br>3. Some features and functions described in this spec sheet may not be supported using .AV Framework. For a complete list of capabilities and options supported by .AV Framework, please visit: www.crestron.com/avframework.<br>4. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.<br>5. The VGA inputs can accept component, composite, and S-Video signals using an appropriate adapter (not included). However, input sync detection is not provided for composite or S-Video signal types.<br>6. When using an analog audio input in combination with an HDMI video input, the source’s video resolution must be 1920x1200 or lower. The analog audio input will not pass audio if the source’s video resolution is higher than 1920x1200.<br>7. Automatically passes 3D video if the display device supports it (reverts to pass-through mode without scaling). Provides automatic 3D-to-2D conversion (with scaling) if the display device does not support 3D.<br>8. Routing of a multichannel audio signal via a digital input and output (HDMI or DM) requires the input to be set for “mixer bypass” mode. When that input is selected, all audio controls on the digital output are disabled and the ability to route the microphone signal to that output is defeated. Mixer bypass mode also disables the Input Compensation control on that input.<br>9. The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “DM 8G+ & HDBaseT Maximum Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.<br>10. License required. The DMPS3-4K-100-C supports a maximum of 500 BACnet objects when dedicated for BACnet use only. Actual capabilities are contingent upon the overall program size and complexity.<br>11. Due to the inherent power loss that occurs over CATx cable, a maximum of 12.95 Watts is delivered at the PoDM or HDBaseT PoE powered device. Any wiring that is connected to a PoDM or HDBaseT PoE PSE port is for intra-building use only and should not be connected to a line that runs outside of the building in which the PSE is located.</p>

<p>The DMPS3-4K-250-C from Crestron® offers an all-in-one 4K AV presentation system for classrooms, boardrooms, lecture halls, and videoconference rooms. Delivering a complete, custom-programmable room solution with fully-configurable signal routing and processing is easy and cost-effective using the DMPS3-4K-250-C. In one 3-space rack mount package, it integrates the control system, matrix switcher, video scaler, streaming decoder, mic mixer, audio DSP, and amplifier. Its built-in AirMedia® gateway, when activated [1], enables wireless presentation from computers and mobile devices. DigitalMedia 8G+® and HDBaseT® connectivity affords a streamlined, long-distance wiring solution for remote sources and display devices, and for facility-wide integration as part of a larger media distribution system.</p><p>Note: To purchase the DMPS3-4K-250-C with AirMedia pre-activated (no license required), see model DMPS3-4K-250-C-AIRMEDIA.<br>4K Ultra HD<br>Crestron DigitalMedia™ continues to advance the standard for digital AV signal management, delivering the most complete end-to-end 4K system solutions available. The DMPS3-4K-250-C handles 4K/60 video with HDCP 2.2 encryption, ensuring support for all the latest 4K and Ultra HD displays and media sources. Support for 4K is also essential to support the latest generation of computers and monitors with native resolutions beyond 1080p and WUXGA.<br> <br><strong>No Programming Required!<br></strong>Installing the DMPS3-4K-250-C is easy, fast, and affordable. Built-in .AV Framework™ technology delivers a fully-functional presentation system with simplified configuration and a choice of control options and other add-ons. For complete details on the capabilities supported by .AV Framework, please visit: http://www.crestron.com/avframework.[2]<br> <br><strong>AirMedia® Wireless Presentation [1]<br></strong>Built-in AirMedia technology allows for wireless presentation of content from a laptop, smartphone, or tablet device via a Wi-Fi® wireless network. With AirMedia, anyone can walk into the room with a Windows® or MacBook® laptop and connect without wires, enabling the presentation of any content including Full HD video at frame rates up to 30 fps. iPhone®, iPad®, and Android™ devices can present PowerPoint®, Excel®, Word, and PDF documents, as well as pictures, videos, or any app content with full-screen mirroring. AirMedia lets up to 32 participants connect at once, switching from one to the next for seamless collaboration on the fly.[1]<br><br></p><strong>HD Streaming Video<br></strong>Its onboard streaming decoder enables the DMPS3-4K-250-C to receive a high-definition AV signal over the network or internet from a DigitalMedia switcher, IP camera, or streaming encoder (Crestron DM-TXRX-100-STR or similar). H.264 and MJPEG streaming formats are supported with resolutions up to HD 1080p and bitrates up to 25 Mbps. High-quality AAC audio decoding is employed to handle 2-channel stereo audio with full frequency response.[3]<br>  <br><p><strong>Key Features</strong></p><ul><li>Ultra high-definition 8x2 system switcher, scaler, mic mixer, audio DSP, amplifier, and control system</li><li>Built-in .AV Framework™ delivers a fully-functional system without any programming [2]</li><li>Integrated 3-Series Control System® allows fully-programmable room control</li><li>Onboard AirMedia® gateway enables wireless BYOD presentation capability [1]</li><li>Built-in H.264 streaming video decoder [3]</li><li>Provides matrix signal routing for up to 8 video sources and 2 displays</li><li>Handles video resolutions up to 4K DCI and Ultra HD</li><li>Includes HDMI®, DM 8G+®, and balanced stereo analog audio inputs</li><li>Also supports Dual-Mode DisplayPort, DVI, and HDBaseT® sources [4]</li><li>QuickSwitch HD™ technology manages HDCP keys for fast, reliable switching</li><li>Auto-Locking® technology achieves rapid switching between disparate sources</li><li>Performs automatic AV signal format management via EDID</li><li>HDCP 2.2 compliant</li><li>Provides adjustable input level compensation on each audio input</li><li>Includes built-in 6-channel gated microphone mixing with DSP</li><li>Provides one HDMI output and one DM 8G+ (HDBaseT compatible) output</li><li>DigitalMedia 8G+® connectivity enables long-distance wiring over CAT type twisted pair cable [7]</li><li>HDBaseT Certified — Enables direct connection to other HDBaseT certified equipment</li><li>Features a high-performance 4K scaler on the HDMI output</li><li>Upscales input signals to match the native resolution of any screen — including 4K and Ultra HD displays!</li><li>Downscales 4K, UHD, and ultra high-resolution computer signals to fit 1080p and other lower-resolution displays</li><li>Handles any input resolution from standard NTSC 480i or PAL 576i, to UHD and 4K</li><li>Provides intelligent frame rate conversion, content-adaptive noise reduction, and motion-adaptive de-interlacing</li><li>Provides 3D to 2D signal conversion [5]</li><li>Provides three balanced stereo audio outputs, each with independent mixer and DSP</li><li>Provides two additional audio mixes, either of which is selectable at either digital output</li><li>Features a built-in amplifier, selectable for 25W/Ch. @ 8Ω stereo or 50W @ 70/100 Volts mono</li><li>Enables analog-to-HDMI audio embedding and de-embedding</li><li>Enables USB signal routing via DM® transmitters and receivers or USB-EXT-DM series extenders [9]</li><li>Includes onboard IR, RS-232, relay, digital input, and Cresnet® control ports</li><li>Supports Crestron® touch screens, keypads, and wireless remotes</li><li>Supports XPanel with Smart Graphics® computer and web based control</li><li>Supports iPhone®, iPad®, and Android™ control apps</li><li>Supports universal remotes via external RC-5 compatible IR receiver [6]</li><li>Communicates natively with Crestron Fusion®</li><li>Enables IT-friendly network integration via SNMP</li><li>Integrated Ethernet switch provides a single-point LAN connection</li><li>Control Subnet — provides a dedicated local network for Crestron devices</li><li>Private Network Mode — requires just one IP address for the complete system</li><li>Content LAN port allows streaming and AirMedia traffic to be isolated on a secondary network</li><li>Includes front panel controls for basic configuration, diagnostics, and signal routing</li><li>Includes customizable front panel label strips and LCD display</li><li>Allows advanced setup and adjustment via a web browser</li><li>Features an internal universal power supply for worldwide compatibility</li><li>Furnishes power to PoDM+ and HDBaseT PoE+ powered devices [8]</li><li>3-space 19-inch rack-mountable</li></ul> <p>1. To enable the onboard AirMedia gateway requires the purchase of one SW-DMPS3-AIRMEDIA license. To obtain the license or for any questions regarding AirMedia activation, please visit https://www.crestron.com/dmps-airmedia-activation. To purchase the DMPS3-4K-250-C with AirMedia pre-activated (no license required), see model DMPS3-4K-250-C-AIRMEDIA. Wireless presentation using AirMedia requires an external wireless access point (not included). A wired Ethernet connection may also be used. AirMedia network traffic can be routed through the primary LAN port or isolated through the CONTENT LAN port. Performance quality for full-motion video content is dependent upon network performance and sending device performance. AirMedia support in the DMPS3-4K-250-C includes the same essential functionality as the AM-101 AirMedia Presentation Gateway with the exclusion of quad view, moderator mode, and remote view.<br>2. Some features and functions described in this spec sheet may not be supported using .AV Framework. For a complete list of capabilities and options supported by .AV Framework, please visit: http://www.crestron.com/avframework.<br>3. The streaming and AirMedia inputs are mutually exclusive. Only one or the other can be used at one time. Streaming network traffic can be routed through the primary LAN port or isolated through the CONTENT LAN port.<br>4. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.<br>5. The HDMI output does not pass 3D signals. On this output, 3D signals are automatically converted to 2D, then scaled and output as 2D. 3D signals can be passed through the DM 8G+ output.<br>6. Item(s) sold separately.<br>7. The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “Maximum DM 8G+ Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.<br>8. Enabling PoDM and PoE power sourcing requires an external power supply, model PW-4830DUS or DM-PSU-3X8-RPS, sold separately. Due to the inherent power loss that occurs over CATx cable, a maximum of 25.5 Watts is delivered at each PoDM+ or HDBaseT PoE+ powered device. Be aware that the CONTROL SUBNET port is limited to regular PoE (Class 0-3), which delivers a maximum of 12.95 Watts to the powered device. Any wiring that is connected to a PoDM or PoE PSE port is for intra-building use only and should not be connected to a line that runs outside of the building in which the PSE is located.<br>9. Manages the routing of USB HID signals between peripheral DM devices that are equipped with USB HID ports. The USB ports onboard the DMPS3-4K-250-C are not usable for USB signal routing. Also programmable to manage the routing of USB signals between Crestron USB over Ethernet Extender modules (USB-EXT-DM, sold separately). Refer to the USB-EXT-DM spec sheet for more information.<br>10. License required. The DMPS3-4K-250-C supports a maximum of 500 BACnet objects when dedicated for BACnet use only. Actual capabilities are contingent upon the overall program size and complexity.</p>

<p>The DMPS3-4K-350-C from Crestron® offers an all-in-one 4K AV presentation system for classrooms, boardrooms, lecture halls, and videoconference rooms. Delivering a complete, custom-programmable room solution with fully-configurable signal routing and processing is easy and cost-effective using the DMPS3-4K-350-C. In one 3-space rack mount package, it integrates the control system, matrix switcher, video scalers, streaming decoder, mic mixer, audio DSP, and amplifier. Its built-in AirMedia® gateway, when activated [1], enables wireless presentation from computers and mobile devices. DigitalMedia 8G+® and HDBaseT® connectivity affords a streamlined, long-distance wiring solution for remote sources and display devices, and for facility-wide integration as part of a larger media distribution system.</p><p>Note: To purchase the DMPS3-4K-350-C with AirMedia pre-activated (no license required), see model DMPS3-4K-350-C-AIRMEDIA.<br>4K Ultra HD<br>Crestron DigitalMedia™ continues to advance the standard for digital AV signal management, delivering the most complete end-to-end 4K system solutions available. The DMPS3-4K-350-C handles 4K/60 video with HDCP 2.2 encryption, ensuring support for all the latest 4K and Ultra HD displays and media sources. Support for 4K is also essential to support the latest generation of computers and monitors with native resolutions beyond 1080p and WUXGA.<br> <br><strong>No Programming Required!</strong><br>Installing the DMPS3-4K-350-C is easy, fast, and affordable. Built-in .AV Framework™ technology delivers a fully-functional presentation system with simplified configuration and a choice of control options and other add-ons. For complete details on the capabilities supported by .AV Framework, please visit: http://www.crestron.com/avframework.[2]<br> <br><strong>AirMedia® Wireless Presentation [1]</strong><br>Built-in AirMedia technology allows for wireless presentation of content from a laptop, smartphone, or tablet device via a Wi-Fi® wireless network. With AirMedia, anyone can walk into the room with a Windows® or MacBook® laptop and connect without wires, enabling the presentation of any content including Full HD video at frame rates up to 30 fps. iPhone®, iPad®, and Android™ devices can present PowerPoint®, Excel®, Word, and PDF documents, as well as pictures, videos, or any app content with full-screen mirroring. AirMedia lets up to 32 participants connect at once, switching from one to the next for seamless collaboration on the fly.[1]<br><br></p><strong>HD Streaming Video</strong><br>Its onboard streaming decoder enables the DMPS3-4K-350-C to receive a high-definition AV signal over the network or internet from a DigitalMedia switcher, IP camera, or streaming encoder (Crestron DM-TXRX-100-STR or similar). H.264 and MJPEG streaming formats are supported with resolutions up to HD 1080p and bitrates up to 25 Mbps. High-quality AAC audio decoding is employed to handle 2-channel stereo audio with full frequency response.[3]<br>  <br><p><strong>Key Features</strong></p><ul><li>Ultra high-definition 9x4 system switcher, scaler, mic mixer, audio DSP, amplifier, and control system</li><li>Built-in .AV Framework™ delivers a fully-functional system without any programming [2]</li><li>Integrated 3-Series Control System® allows fully-programmable room control</li><li>Onboard AirMedia® gateway enables wireless BYOD presentation capability [1]</li><li>Built-in H.264 streaming video decoder [3]</li><li>Provides matrix signal routing for up to 9 video sources and 4 displays</li><li>Handles video resolutions up to 4K DCI and Ultra HD</li><li>Includes HDMI®, DM 8G+®, and balanced stereo analog audio inputs</li><li>Also supports Dual-Mode DisplayPort, DVI, and HDBaseT® sources [4]</li><li>QuickSwitch HD™ technology manages HDCP keys for fast, reliable switching</li><li>Auto-Locking® technology achieves rapid switching between disparate sources</li><li>Performs automatic AV signal format management via EDID</li><li>HDCP 2.2 compliant</li><li>Provides adjustable input level compensation on each audio input</li><li>Includes built-in 6-channel gated microphone mixing with DSP</li><li>Provides two HDMI and two DM 8G+ (HDBaseT compatible) outputs</li><li>DigitalMedia 8G+® connectivity enables long-distance wiring over CAT type twisted pair cable [7]</li><li>HDBaseT Certified — Enables direct connection to other HDBaseT certified equipment</li><li>Features an independent, high-performance 4K scaler at each HDMI output</li><li>Upscales input signals to match the native resolution of any screen — including 4K and Ultra HD displays!</li><li>Downscales 4K, UHD, and ultra high-resolution computer signals to fit 1080p and other lower-resolution displays</li><li>Handles any input resolution from standard NTSC 480i or PAL 576i, to UHD and 4K</li><li>Provides intelligent frame rate conversion, content-adaptive noise reduction, and motion-adaptive de-interlacing</li><li>Provides 3D to 2D signal conversion [5]</li><li>Provides three balanced stereo audio outputs, each with independent mixer and DSP</li><li>Provides two additional audio mixes, either of which is selectable at any digital output</li><li>Features a built-in amplifier, selectable for 25W/Ch. @ 8Ω stereo or 50W @ 70/100 Volts mono</li><li>Enables analog-to-HDMI audio embedding and de-embedding</li><li>Enables USB signal routing via DM® transmitters and receivers or USB-EXT-DM series extenders [9]</li><li>Includes onboard IR, RS-232, relay, digital input, and Cresnet® control ports</li><li>Supports Crestron® touch screens, keypads, and wireless remotes</li><li>Supports XPanel with Smart Graphics® computer and web based control</li><li>Supports iPhone®, iPad®, and Android™ control apps</li><li>Supports universal remotes via external RC-5 compatible IR receiver [6]</li><li>Communicates natively with Crestron Fusion®</li><li>Enables IT-friendly network integration via SNMP</li><li>Integrated Ethernet switch provides a single-point LAN connection</li><li>Control Subnet — provides a dedicated local network for Crestron devices</li><li>Private Network Mode — requires just one IP address for the complete system</li><li>Content LAN port allows streaming and AirMedia traffic to be isolated on a secondary network</li><li>Includes front panel controls for basic configuration, diagnostics, and signal routing</li><li>Includes customizable front panel label strips and LCD display</li><li>Allows advanced setup and adjustment via a web browser</li><li>Features an internal universal power supply for worldwide compatibility</li><li>Furnishes power to PoDM+ and HDBaseT PoE+ powered devices [8]</li><li>3-space 19-inch rack-mountable</li></ul> <p>1. To enable the onboard AirMedia gateway requires the purchase of one SW-DMPS3-AIRMEDIA license.  To purchase the DMPS3-4K-350-C with AirMedia pre-activated (no license required), see model DMPS3-4K-350-C-AIRMEDIA. Wireless presentation using AirMedia requires an external wireless access point (not included). A wired Ethernet connection may also be used. AirMedia network traffic can be routed through the primary LAN port or isolated through the CONTENT LAN port. Performance quality for full-motion video content is dependent upon network performance and sending device performance. AirMedia support in the DMPS3-4K-350-C includes the same essential functionality as the AM-101 AirMedia Presentation Gateway with the exclusion of quad view, moderator mode, and remote view.<br>2. Some features and functions described in this spec sheet may not be supported using .AV Framework. For a complete list of capabilities and options supported by .AV Framework, please visit: http://www.crestron.com/avframework.<br>3. The streaming and AirMedia inputs are mutually exclusive. Only one or the other can be used at one time. Streaming network traffic can be routed through the primary LAN port or isolated through the CONTENT LAN port.<br>4. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.<br>5. The HDMI outputs do not pass 3D signals. On these outputs, 3D signals are automatically converted to 2D, then scaled and output as 2D. 3D signals can be passed through the DM 8G+ outputs.<br>6. Item(s) sold separately.<br>7. The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “Maximum DM 8G+ Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.<br>8. Enabling PoDM and PoE power sourcing requires an external power supply, model PW-4830DUS or DM-PSU-3X8-RPS, sold separately. Due to the inherent power loss that occurs over CATx cable, a maximum of 25.5 Watts is delivered at each PoDM+ or HDBaseT PoE+ powered device. Be aware that the CONTROL SUBNET port is limited to regular PoE (Class 0-3), which delivers a maximum of 12.95 Watts to the powered device. Any wiring that is connected to a PoDM or PoE PSE port is for intra-building use only and should not be connected to a line that runs outside of the building in which the PSE is located.<br>9. Manages the routing of USB HID signals between peripheral DM devices that are equipped with USB HID ports. The USB ports onboard the DMPS3-4K-350-C are not usable for USB signal routing. Also programmable to manage the routing of USB signals between Crestron USB over Ethernet Extender modules (USB-EXT-DM, sold separately). Refer to the USB-EXT-DM spec sheet for more information.<br>10. License required. The DMPS3-4K-350-C supports a maximum of 500 BACnet objects when dedicated for BACnet use only. Actual capabilities are contingent upon the overall program size and complexity.</p>