Laboratory workstation with cabinets, shelves, sink and MEP connections.

Tie Fighter made on start PLN file as it was prepared by Graphisoft. 2D for Object wasn't cleaned as i is simple test how hard it is build such Morphs from scratch. :-)

2-Flügelfenster 1+1

test

With proven and reliable high performance sterilizing technology, the new Steelco autoclave’s chamber is made of AISI 316L stainless steel and a full jacket system for even steam/heat distribution. Versatility, easy handling and high performance with the low cost of ownership of a tabletop unit, to single or double door versions. • All in one compact solution for easy installation into existing rooms • EN 285 compliant: 3 process cycles and Bowie-Dick, Helix test cycles • 8 additional custom cycles • PED marking Stand upon request: 820mm/32.28” height stand, equipped with lockable doors Паровые настольные стерилизаторы VS TT L Steelco Главные особенности: Объемы камер 85 л и 94 л Встроенный электрический парогенератор Горизонтальная загрузка Паровые стерилизаторы STEELCO VS TT L имеют микропроцессорное управление с цветным сенсорным дисплеем 7» и независимой системой регистрации параметров. Сплошная рубашка камеры. Быстросъемные соединения. Глянцевая полировка (2 мкм) камеры и трубопроводов процесса. Обезжиривание и пассивация камеры и трубопроводов процесса. Встроенный термопринтер. Стерилизаторы имеют встроенные рабочие программы с температурами стерилизации: 121°С и 134°С, а также тестовые/сервисные программы: Нагрев, Бови-Дик и вакуумный тест на утечку. Область применения Паровые стерилизаторы STEELCO VS TT L предназначены для стерилизации различных материалов (пористых, материалов устойчивых к нагреву, оборудования, инструментов, посуды, клеток для животных и т.д.); жидкостей и сред в вентилируемых и укупоренных контейнерах; или деконтаминации материалов после лабораторного использования и т.д.

Vortex test tube mixer. This is a single well type with a stirring action that starts with a touch of the test tube. It is a variable speed unit from 100-3000 rpm. Used in a laboratory for mixing small samples in a test tube, colorimetric tubes or Erlenmeyer flasks.

Test Object

Unitized facades with high level of cost-effectiveness, functionality as well as an attractive appearance – and façade bracket for universal load connection [LIST] The design of the Schüco Façade USC 65 F (Unitised System Construction) is flexible and can be fabricated efficiently. With its all-round narrow face width of only 65 mm as well as maximum unit weights up to 500 kg, it enables large architecturally appealin For using opening units in unitised façades, there is a wide range of Schüco windows from the AWS to the super-insulated Schüco AWS 114 SG.SI series Different lengths of insulating bar with Uf values of 1.4 W/(m²K) to 2.9 W/(m²K) for variable adjustment to different thermal insulation requirements Comprehensive system tests in accordance with European and American test standards Large unit dimensions and heavy unit weights of up to 500 kg possible; 125 mm and 150 mm basic depths Glass thicknesses : Single glazing from 4 - 16 mm; Insulating glass from 16 - 56 mm Excellent weathertightness due to overlapping gasket for coupling gasket and saddle gasket; 3-chamber principle Burglar resistance WK2 in accordance with DIN ENV 1627 [/LIST]

Drug screening analyzer. It is a random access chemistry analyzer system. The system's capabilities/components include 23 test channels. Over 600 tests per hour; it accepts sample volumes from 2ml to 20mL, fluorescence/light scatter. Used for measuring electrolytes, routine chemistries, special proteins, therapeutic drug monitoring, EIA and fluorescence immunoassay applications.

Stat chemistry analyzer, high capacity. The unit performs tests in 3-1/2 to 10 minutes. The test parameters are serum, urine and CSF. The unit performs at least 33 routine tests. The analyzer can process at least 63 samples at a time with a maximum analytical rate of at least 600 tests per hour. It is used for electrolytes, blood hematocrit and other routine chemistries.

Stat chemistry analyzer. The unit performs tests in <10 minutes. The test parameters are serum, urine and CSF. The unit performs over 37 routine tests. The analyzer can process 100 samples at a time with a maximum analytical rate of 420 tests per hour. It is used for electrolytes, blood hematocrit and other routine chemistries.

Automatic blood cell counter. The counter has a built-in monitoring system. It can perform a test in 13 seconds using a 100 microliter sample and give the results of 3 to 5 parameters of WBC, RBC, Hgb, Hct, and MCV. It has programs that include control data, calibration settings and tests and it has a temperature compensation circuit. Used for hematology analysis.

Microbiological identification system. The systems basic principles of operation consists of: photometry, fluorescence, radiometry, infrared spectrophotometry, and video image analysis, together with a MPLS (multiple-parameter light scattering technique) and a continuous flow-through detection system. It consists of an auto-prep station, auto filter, incubator, detector/reader, waste reservoir, and computer sample throughput of over 200/day. Designed to detect presence of micro organisms in body fluids, test susceptibility of micro organisms to anti microbial agents, and/or determine the minimum inhibitory concentrations of antibiotics in order to identify pathogens.

Hearing aid analyzer. It includes a complete acoustic test system, comprised of a control unit, color monitor, and hearing aid test box. For use in automatically testing, calculating and printing all electrical and acoustical performance data of any hearing aid in accordance with ANSI S3.22.

Therapeutic spirometer. Unit features a recorder, and instantaneous digital display of the actual and % predicted test results. Designed for patient examination in hospitals and clinics to determine respiratory volume capacity. Unit may require a microcomputer for full display and printing of testing results. Database utility specifications reflect minicomputer power requirements.

Acuity test projector. Unit is a chart-projection type on a floor stand with slides and wall mounted screen (13x13 min) for projecting test object and characters. It is designed for use in eye refraction testing procedures.

Used to detect the electrical signals associated with cardiac activity, diagnose cardiac abnormalities, determine a patients response to drug therapy and reveal trends or changes in heart function. Capable of recording two or more leads simultaneously, recording an entire 12 lead ECG in about 10 seconds. Includes of a 3.5 inch, high density, floppy disk drive for test storage. Portable.

Ultrasonic wattmeter. Characteristics/components include electronic and mechanical design to provide superior performance and greater durability; clear Plexiglas tubing on the front panel that allows the operator to immediately determine the liquid level within the sealed reservoir; and power measurements that can be conveniently read on the LCD display. This unit is a one-of-a-kind instrument used by biomedical repair persons who regularly test therapeutic ultrasound devices. Unit is battery powered.

State of the art technology and a comprehensive profile range make the aluminum window WICLINE 65 evo a perfect all-rounder with a versatile spectrum of applications. By using a design depth of only 65 mm, this system meets high standards required for thermal and sound insulation. WICLINE 65 evo offers a very attractive price / performance ratio. System test results / CE product pass in accordance with DIN EN 14351-1:2006+A1:2010 Air permeability: Class 4 Watertightness: E900 Resistance to wind load: Class C5 / B5 Acoustic performance: Rw (C;Ctr ) = 47 (–1; –4) dB Operating forces: Class 1 Load bearing capacity of safety devices: Fulfilled Mechanical strength: Class 4 Repeated opening / closing: Class 3 (20,000 cycles) Corrosion resistance of the fittings: Class 5 Burglar resistance: RC1N, RC2N, RC2, RC3 Bullet resistance: FB4 S, FB4 NS (depending on the profile combination) Quality assurance: Certified according to ISO 9001:2008 Environmental management: Certified according to ISO 14001

Reduced profile elevations leading to maximum transparency: With its integrated pressure profile WICTEC 50 offers an inexpensive solution with a design similar to structural glazing. The glazing technology with a flush or low pressure profile the assembly is as fast and easy as for a classic stick system curtain wall. System test results / CE product pass in accordance with DIN EN 13830 Air permeability: Class AE Watertightness: RE 1200 Resistance to wind load: 2000 / –3200 Pa, security 3000 / –4800 Pa Impact resistance: Class E5 / I5 Burglar resistance: RC1N Quality assurance: Certified according to ISO 9001:2008 Environmental management: Certified according to ISO 14001

WICTEC 50 is the basic version of the stick system curtain wall, with an extra-narrow face width of 50 mm, inside and outside. The unique flexibility is demonstrated by the various system variants and enhancement options, all of which are feasible with minor additions to the system and without compromising on appearance. System test results / CE product pass in accordance with DIN EN 13830 Air permeability: Class AE Watertightness: RE 1200 Resistance to wind load: 2000 / –3200 Pa, security 3000 / –4800 Pa Sound insulation: Rw (C;Ctr ) = 47 (–1; –4) dB Impact resistance: Class E5 / I5 Burglar resistance: RC1N, RC2N, RC2, RC3 Bullet resistance: FB4 Quality assurance: Certified according to ISO 9001:2008 Environmental management: Certified according to ISO 14001

With 75 mm profile depth, WICSTYLE 75 evo puts itself ahead in terms of thermal insulation and physical features. Its outstanding technical performance and application range make it the ideal door solution for all current and future requirements in architecture, both in new buildings and in renovations. System test results / CE product pass in accordance with DIN EN 14351-1:2006+A1:2010 Air permeability: Until Class 4 Watertightness: Until 7A Resistance to wind load: Class C2 Acoustic performance: Rw (C; Ctr) until 43 (–2; –5) dB Operating forces: Class 2 Load bearing capacity of safety devices: Fulfilled Mechanical strength: Class 3 Repeated opening / closing: Class 7 (500,000 cycles) Impact resistance: Class 1 Behaviour between different climates: Until class 2(e) 2(d) Burglar resistance: RC1N, RC2N, RC2, RC3 Quality assurance: Certified according to ISO 9001:2008 Environmental management: Certified according to ISO 14001

With 75 mm profile depth, WICLINE 75 evo features the highest thermal insulation properties and structural characteristics. With its superior technical performance this aluminium window is attuned to all architectural requirements of the future. In Switzerland WICLINE 75 evo has been the first metal window to be certified as Minergie-P module window. System test results / CE product pass in accordance with DIN EN 14351-1:2006+A1:2010 Air permeability: Class 4 Watertightness: E900 Resistance to wind load: Class C5 / B5 Acoustic performance: Rw (C;Ctr ) = 47 (–1; –4) dB Operating forces: Class 1 Load bearing capacity of safety devices: Fulfiled Mechanical strength: Class 4 Repeated opening / closing: Class 3 (20,000 cycles) Corrosion resistance of the fittings: Class 5 Burglar resistance: RC1N, RC2N, RC2, RC3 Bullet resistance: FB4 S, FB4 NS (depending on the profile combination) Quality assurance: Certified according to ISO 9001:2008 Environmental management: Certified according to ISO 14001

As an attractive complement for curtain walls the integration sash WICLINE 90SG provides efficient ventilation, if requested also fully automated. This all-glass window gives full options as a projecting top-hung sash or as a parallel outward opening sash and can be integrated flush with the glass pane level in WICTEC 50SG structural glazing curtain walling or in stick systems with exterior pressure profiles. For an optimum thermal insulation WICLINE 90SG can be equipped with double or triple glazing. Using standard glass without glass step leads to an economy of cost and improved safety. System test results / CE product pass in accordance with DIN EN 14351-1:2006+A1:2010 Air permeability: Class 4 Watertightness: E750 Resistance to wind load: Class C4 / B4 Repeated opening / closing: Class 2 (10,000 cycles) Impact resistance: Class 3 Load bearing capacity of safety devices: Fulfilled Approval ETA: -11/0042 (European Technical Approval) Quality assurance: Certified according ISO 9001:2008 Environmental management: Certified according to ISO 14001

WICSTYLE 65 evo with its flush leaf design in 65 mm system depth and a comprehensive application range is perfectly qualified for highest demands in design, technological quality and performance. Due to its favourable price/performance ratio it constitutes an economical aluminium door solution for almost any requirement. System test results / CE product pass in accordance with DIN EN 14351-1:2006+A1:2010 Air permeability: Class 4 Watertightness: Until 7A Resistance to wind load: Class C2 Acoustic performance: RW (C; Ctr ) until 43 (–2; –5) dB Operating forces: Class 2 Load bearing capacity of safety devices: Fulfilled Mechanical strength: Class 3 Repeated opening / closing: Class 7 (500,000 cycles) Impact resistance: Class 1 Behaviour between different climates: Until class 2(e) 2(d) Burglar resistance: RC1N, RC2N, RC2, RC3 Bullet resistance: Until FB4 Quality assurance: Certified according to ISO 9001:2008 Environmental management: Certified according to ISO 14001

Wicslide 65 sliding windows and patio doors is the perfect solution for combining high thermal performance and large sizes. With its various designs of outer and opening frames, multiple leaf combinations (from 2 to 6 leaves) and its comprehensive range of dual colour solutions, the Wicslide 65 brings greater freedom to building design. Designed to meet market demands, Wicslide 65 sliding doors are perfectly suited for disabled access. System test results / CE product pass in accordance with DIN EN 14351-1: Air permeability: Class 4 Watertightness: Class 6B Resistance to wind load: Class A3 Acoustic performance: RA,tr = 35 dB Operating forces: Class 1 Corrosion resistance of fittings: Class 4 Quality assurance: Certified according to ISO 9001:2008 Environmental management: Certified according to ISO 14001

The new WICSLIDE 160 lifting sliding system combines excellent thermal insulation with highest functionality and design. Impressive leaf dimensions and enduring operation comfort are your guarantors for maximum customer satisfaction. With state-of-the-art technology and innovative advantages in fabrication WICSLIDE 160 is a high-tech product that sets new standards. System test results / CE product pass in accordance with DIN EN 14351 Air permeability: Class 4 Watertightness: E1350A Resistance to wind load: Class C3 Acoustic performance: Rw (C; Ctr) = 41 (–2; –5) dB Quality assurance: Certified according to ISO 9001:2008 Environmental management: Certified according to ISO 14001

WICLINE 95 meets the high requirements of the Dr. Feist Passive House Institute in Darmstadt, Germany, and due to its intelligent modular design offers maximum flexibility in planning projects. In the WICLINE 95 the thermoframe insulator sits inside the window and can be finished as a sashframe and conveniently installed by the installer using the intelligent Clips Technology. This allows a variable setting of the Uf value of the window. System test results / CE product pass in accordance with DIN EN 14351-1:2006+A1:2010 Air permeability: Class 4 Waterproofing against driving rain: E900 Resistance to wind load: Class C5 / B5 Soundproofing: Rw (C;Ctr ) = 47 (–1; –4) dB Operating forces: Class 1 Load capacity of safety precautions: passed Mechanical strength: Class 4 Continuous operation: Class 3 (20,000 cycles) Corrosion resistance of fittings: Class 5 Burglar resistance: RC1N, RC2N, RC2, RC3 Quality management: Certified according to ISO 9001:2008

FAAC J355 HA M30-P1 bollard is certified for the use in perimeter security; it has been purposely designed for the protection of sensitive areas, such as airports embassies, consulates, banks, harbors, etc. FAAC J355HA-M30-P1 bollard has been tested according to the American standards “ASTM F 2656-07 - Standard Test Method for Vehicle Crash Testing of Perimeter Barriers”, obtaining thus the certification for the highest penetration rate. The class M30-P1 indicates that FAAC J355 HA M30-P1 bollard is able to stop a 6800kg truck at a speed of 50Km/h (=30M/h) in 1 meter (P1). J355 HA M30-P1 main features are: 1. Tested according to ASTM F 2656-07 2. Integrated Hydraulic Unit concept 3. Kept lock in up position also in the event of power failure 4. Extreme care in the material selection 5. Rapid and silent movements

FAAC J355 HA M50 bollard is certified for the use in perimeter security; it has been purposely designed for the protection of sensitive areas, such as airports embassies, consulates, banks, harbors, etc. FAAC J355 HA M50 bollard has been tested according to PAS 68:2013 Impact test specifications for vehicle security barrier systems and IWA 14-1:2013 - Vehicle security barriers - Part 1: Performance requirement, vehicle impact test method and performance rating. FAAC J355 HA M50 bollard is able to stop a 7.500kg truck at a speed of 80Km/h (=50M/h). FAAC J355 HA M50 main features are: 1. Tested according to PAS 68:2013 and IWA 14-1:2013 2. Integrated Hydraulic Unit concept 3. Kept lock in up position also in the event of power failure 4. Extreme care in the material selection 5. Rapid and silent movements

Proctection & decoration - 100% antibacterial - Multi-application Wall - Wall protection Total protection fitting all areas by providing impact resistance, high level of hygiene and a decorative touch • Unique textured surface hiding impacts and scratches, easy to clean • Resists to 320 kg at 3 km/h impacts • Non-porous 100% antibacterial material suitable for high infection risk areas • Welded joints possible for perfect watertightness between panels or with vinyl flooring • Resists to standard cleaning, disinfection and antiseptic products (Anios and Bioquell test reports)

Protection and decoration - 100% antibacterial - Multi-application Wall - Wall protection Decorative frescoes to protect and highlight the walls • Textured surface hiding impacts and scratches • Non-porous antibacterial material • Resists to standard cleaning, disinfection and antiseptic products (Anios and Bioquell test reports) • 5 themes available to fit every area

Weldable - Smooth - Clean room Wall - Wall protection Smooth protection panel for high infection risk areas • Smooth alternative to Decochoc panel • Suitable for high infection risk areas such as operating theter • Welded joints possible for perfect watertightness between panels or with vinyl flooring • Resists to standard cleaning, disinfection and antiseptic products (Anios and Bioquell test reports)

Wood design - Easy cleaning - Moderate traffic Wall - Wall protection Panel providing protection against impact and abrasion as well as the style of a wood effect finish • Warmth of wood without the drawbacks • High abrasion resistance of the heat-sealed film • Resists to standard cleaning, disinfection and antiseptic products (Anios and Bioquell test reports) • 7 wood effect colours, available for handrails and corners too

Modern design - Protection - Moderate traffic Wall - Wall protection Combination of wall protection and decoration ideally suited in reception, offices, rooms and corridors • High abrasion resistance of the heat-sealed film • Resists to standard cleaning, disinfection and antiseptic products (Anios and Bioquell test reports) • 4 decors available with astonishing visual effects

Protection & decoration - 100% antibacterial - Heavy traffic Wall - Door protection Protection of the door in entrances and corridors from trolley impacts and pedestrian traffic •Unique textured surface hiding impacts and scratches •Non-porous antibacterial material suitable for high infection risk areas •Resists to standard cleaning, disinfection and antiseptic products (Anios and Bioquell test reports) •Cut-to-size to fit the door

Decoration - 100% antibacterial - Heavy traffic Wall - Door protection Decorative protection to bring a touch of originality while increasing the life span of the door •Unique textured surface hiding impacts and scratches •Cut-to-size to fit the door •Resists to standard cleaning, disinfection and antiseptic products (Anios and Bioquell test reports) •9 designs available in 35 colours to combine (one or two-colour)

Protection - 100% antibacterial - Light traffic Wall - Door protection Decoration and targeted protection of the doors from wear and dirt around handles •Perfect hygiene around handles thanks to non-porous antibacterial material •Resists to standard cleaning, disinfection and antiseptic products (Anios and Bioquell test reports) •Textured surface hides scratches •7 designs available in 35 colours

Signage - 100% antibacterial - Moderate traffic Wall - Door protection Combination of door protection and visual guidance •Signage role to help people find their way •Choice between numbers or animals’ drawings •Unique textured surface hiding impacts and scratches •Resists to standard cleaning, disinfection and antiseptic products (Anios and Bioquell test reports)

On measure protection - Doors' durability - Heavy traffic Wall - Door protection Protection of the edges and frames against frequent impact of trolleys and carts •Unique textured surface hiding impacts and scratches •Protection of lateral edges thanks to bends into L or U •Made to measure to fit every frame and edge •Resists to standard cleaning, disinfection and antiseptic products (Anios and Bioquell test reports)

Decoration - 100% antibacterial - Heavy traffic Wall - Door protection Decorative protection to bring a touch of originality while increasing the life span of the door •Unique textured surface hiding impacts and scratches •Cut-to-size to fit the door •Resists to standard cleaning, disinfection and antiseptic products (Anios and Bioquell test reports) •9 designs available in 35 colours to combine (one or two-colour)

Signage - 100% antibacterial - Moderate traffic Wall - Door protection Combination of door protection and visual guidance •Signage role to help people find their way •Choice between numbers or animals’ drawings •Unique textured surface hiding impacts and scratches •Resists to standard cleaning, disinfection and antiseptic products (Anios and Bioquell test reports)

FAAC J355 HA M30-P1 Emergency Fast Operation (EFO) bollard is certified for the use in perimeter security; it has been purposely designed for the protection of sensitive areas, such as airports embassies, consulates, banks, harbors, etc. FAAC J355HA-M30-P1 EFO bollard has been tested according to the American standards “ASTM F 2656-07 - Standard Test Method for Vehicle Crash Testing of Perimeter Barriers”, obtaining thus the certification for the highest penetration rate. The class M30-P1 indicates that FAAC J355 HA M30-P1 bollard is able to stop a 6800kg truck at a speed of 50Km/h (=30M/h) in 1 meter (P1). Emergency Fast Operation device (EFO) guarantees a very rapid rising speed (1.5s) to increase the offered protection. J355 HA M30-P1 EFO main features are: 1. Tested according to ASTM F 2656-07 2. Integrated Hydraulic Unit concept 3. Kept lock in up position also in the event of power failure 4. Extreme care in the material selection 5. Rapid and silent movements 6. Very quick emergency rising (1.5s)

FAAC J355 HA M50 Emergency Fast Operation (EFO) bollard is certified for the use in perimeter security; it has been purposely designed for the protection of sensitive areas, such as airports embassies, consulates, banks, harbors, etc. FAAC J355 HA M50 EFO bollard has been tested according to PAS 68:2013 Impact test specifications for vehicle security barrier systems and IWA 14-1:2013 - Vehicle security barriers - Part 1: Performance requirement, vehicle impact test method and performance rating. FAAC J355 HA M50 EFO bollard is able to stop a 7.500kg truck at a speed of 80Km/h (=50M/h). Emergency Fast Operation device (EFO) guarantees a very rapid rising speed (2s) to increase the offered protection. FAAC J355 HA M50 EFO main features are: 1. Tested according to PAS 68:2013 and IWA 14-1:2013 2. Integrated Hydraulic Unit concept 3. Kept lock in up position also in the event of power failure 4. Extreme care in the material selection 5. Rapid and silent movements 6. Very quick emergency rising (2s)

The PYROPLUS door sets from DOORTAL have been designed to suit both public and private buildings, where they will stand the test of time and intensive use. They represent the highest standard for mechanical resistance with 1.5 mm thick steel, a strong sectional frame and steel hinges with stainless steel ball bearings. The “10 year warranty” label is a proof of DOORTAL’s commitment to quality. These door sets have EI 30 and EI 60 ratings (integrity and insulation). They can also be acoustic rated (40 and 50 dB) and thermal rated (U value from 1.7 to 1.4 W/m².K). Made of galvanized steel, PYROPLUS door sets are protected from rust with weather seals fixed on all four sides in order to be completely watertight. They are suitable for interior or exterior use. The PYROPLUS 30 and 60 door sets have been laboratory tested with varying door equipment: standard locks, 3 point, panic bars, electric locks for access control, door closers, vision panels etc. This opens up a wide range of fire resistant choices to suit premises open to the public, whatever functions are required. To save time on site, DOORTAL uses the “Chronofix” concept which consists of fitting all the furniture in our factory. The installer receives his custom size or standard size door set 100% ready-to-fix.

The PYROPLUS door sets from DOORTAL have been designed to suit both public and private buildings, where they will stand the test of time and intensive use. They represent the highest standard for mechanical resistance with 1.5 mm thick steel, a strong sectional frame and steel hinges with stainless steel ball bearings. The “10 year warranty” label is a proof of DOORTAL’s commitment to quality. These door sets have EI 30 and EI 60 ratings (integrity and insulation). They can also be acoustic rated (40 and 50 dB) and thermal rated (U value from 1.7 to 1.4 W/m².K). Made of galvanized steel, PYROPLUS door sets are protected from rust with weather seals fixed on all four sides in order to be completely watertight. They are suitable for interior or exterior use. The PYROPLUS 30 and 60 door sets have been laboratory tested with varying door equipment: standard locks, 3 point, panic bars, electric locks for access control, door closers, vision panels etc. This opens up a wide range of fire resistant choices to suit premises open to the public, whatever functions are required. To save time on site, DOORTAL uses the “Chronofix” concept which consists of fitting all the furniture in our factory. The installer receives his custom size or standard size door set 100% ready-to-fix.

Stone effect embossed surface [LIST] Synthetic rubber flooring with a nominal thickness of 3 mm, with a high wear-resistant covering layer with monocolored pre-vulcanized granules of the same composition of the base and a rubber substrate, calendered and vulcanised together to guarantee perfect monolithicity, embossed with stone effect, compact, wear-resistant, non-slip Rolls 1.90 x 10 m or 61 x 61 cm tiles Improved performance and cleanability surface by the special TXL surface curing treatment Classified R10 according to the DIN 51130 ramp slip test method Wrong side will be lightly sanded for the adhesive attachment Safe in case of fire Free of carcinogenic nitrosamines, pentachlorophenol pcp, pvc and any halogens (chlorine, fluorine, bromine and iodine), cadmium, formaldehyde, asbestos Free of phthalates and plasticizers Respond to the German AgBB regulation on the emission of volatile organic compounds VOC. Has the Blue Angel and Greenguard Gold environmental certifications "Non-toxic" certified in case of fire according to DIN 53436, Classified according to the European waste catalog (CER) as non-hazardous special waste, and therefore similar to urban waste according to DCI 27/7/84. [/LIST]

Part number: CP0016H Surface-mounted baby changing station made of bacterial-resistant polypropylene. BabyMedi® changing stations offer a very high level of safety and cleanliness being the ideal solution for public spaces such as, shopping centers, airports, public buildings, childcare centres, etc. Models suitable for high traffic facilities with high strength and durability. Their trendy and stylish design, allow these baby changing stations to blend into any space perfectly. Biocote® antimicrobial additive, based on ion silver technology, is embedded into its own surface, promoting an easy cleaning and reducing the growth of odor causing and staining microbes. BabyMedi® baby changing stations are supplied (inside the packing box) with child protection straps made of nylon. A pair of bag hooks (one at the right side and the other one at the left) help to keep personal belongings close and at hand. BabyMedi® units fully comply with the EN 12221-1 and EN 12221-2 standards that require baby changing stations be able to support a 50 Kg static load test during one hour. Moreover, units tested in our own laboratories have withstood loads over 100 kg.

Part number: CP0016HCS Surface-mounted baby changing stations made of bacterial-resistant polypropylene and with stainless steel AISI 304 exterior. BabyMedi® changing stations offer a very high level of safety and cleanliness being the ideal solution for public spaces such as, shopping centers, airports, public buildings, childcare centres, etc. Models suitable for high traffic facilities with high strength and durability. Their trendy and stylish design, allow these baby changing stations to blend into any space perfectly. Biocote® antimicrobial additive, based on ion silver technology, is embedded into its own surface, promoting an easy cleaning and reducing the growth of odor causing and staining microbes. BabyMedi® baby changing stations are supplied (inside the packing box) with child protection straps made of nylon. A pair of bag hooks (one at the right side and the other one at the left) help to keep personal belongings close and at hand. BabyMedi® units fully comply with the EN 12221-1 and EN 12221-2 standards that require baby changing stations be able to support a 50 Kg static load test during one hour. Moreover, units tested in our own laboratories have withstood loads over 100 kg.

System 162 push/pull handle set for equipping doors or emergency exits For emergency exits: Approval to EN 179 in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634 and 9 mm square spindle. Suitable as operating element on doors to DIN 18040, with accessibility function within operating range at 850 mm above FFL. Handle made of a stainless steel tube, diameter 30 mm, straight handle with straight connection, height 450 mm, width 124 mm, satin surface, backplates made of metal with polyamide cap, maintenance-free plain bearings, mechanical adjustment for the pull handle. Fast installation on the door due to already preassembled pull handles on the bottom section. Installation in pairs, function in opening direction - push, function in opposite direction - pull, with continuous spindle. Classification: spindle 8 mm - no classification spindle 9 mm Designed and tested for projects, classification to EN 179 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class 0, A or B Safety - personal protection: Class 1 Corrosion protection: Class 3 Security - burglary protection: Class 2 Projection of operating element: Class 1 Type of operation: B Field of door application: Class A, B, C or D The classification results only in connection with the lock according to EN 179, for example, BKS, Fuhr or Fliether The selected combinations are assigned freely and do not have to take on a lock manufacturer. For more information, contact HEWI or the lock manufacturer! Article no.: HEWI 162XADG06

System 111 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS111XA10

System 111 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Handle made of stainless steel, diameter 25 mm with tubular handle made of stainless steel, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS111XA20

System 111 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Version for BKS-locks. Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 32 mm, width of the transmission unit 52 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS111XA30

System 111 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Version for BKS-locks. Handle made of stainless steel, diameter 25 mm with tubular handle made of stainless steel, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 32 mm, width of the transmission unit 52 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS111XA40

System 162 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS160XA10

System 162 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Handle made of stainless steel, diameter 25 mm with tubular handle made of stainless steel, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS160XA20

System 162 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Version for BKS-locks. Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 32 mm, width of the transmission unit 52 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS160XA30

System 162 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Version for BKS-locks. Handle made of stainless steel, diameter 25 mm with tubular handle made of stainless steel, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 32 mm, width of the transmission unit 52 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS160XA40

Hebel fire wall panels – 360 minutes fire protection Structural fire protection at the highest level. Hebel fire wall panels are suitable for external and internal walls. Being an incombustible material of fire class A1 (non-flammable), aerated concrete does not contribute to the fire, does not produce smoke or other gases in a case of fire and furthermore effectively blocks off smoke and heat. Hebel aerated concrete meets the requirements of all fire resistance classes from F30 to F180 respectively EI30 to EI180 regulated by national and European standards. Fire behavior of Hebel aerated concrete: - non-flammable - great thermal insulation against heat - not dripping - no smoke or toxic gases - no functional impairment External walls made of Hebel fire wall panels have the same fire resistance than Hebel fire walls and therefore offer a maximum safety against fire flashover. Proofed Safety: A fire behavior test at a German material testing institute for the construction industry (Institute of Building Materials, Solid Construction and Fire Protection at the Technical University of Braunschweig) prooves the high standard of the Hebel fire wall panels. Result: The material resists fire for 360 minutes without any relevant functional impairment. During the planning process of Hebel reinforced panels for walls, ceilings and roofs, Hebel experts will support you to find the right design according to your requirements right from the start. The system solution shown here is exemplary for a first planning. The suitability and specification must be carried out in agreement with the planner in any case.

Hebel fire wall panels – 360 minutes fire protection Structural fire protection at the highest level. Hebel fire wall panels are suitable for external and internal walls. Being an incombustible material of fire class A1 (non-flammable), aerated concrete does not contribute to the fire, does not produce smoke or other gases in a case of fire and furthermore effectively blocks off smoke and heat. Hebel aerated concrete meets the requirements of all fire resistance classes from F30 to F180 respectively EI30 to EI180 regulated by national and European standards. Fire behavior of Hebel aerated concrete: - non-flammable - great thermal insulation against heat - not dripping - no smoke or toxic gases - no functional impairment External walls made of Hebel fire wall panels have the same fire resistance than Hebel fire walls and therefore offer a maximum safety against fire flashover. Proofed Safety: A fire behavior test at a German material testing institute for the construction industry (Institute of Building Materials, Solid Construction and Fire Protection at the Technical University of Braunschweig) prooves the high standard of the Hebel fire wall panels. Result: The material resists fire for 360 minutes without any relevant functional impairment. During the planning process of Hebel reinforced panels for walls, ceilings and roofs, Hebel experts will support you to find the right design according to your requirements right from the start. The system solution shown here is exemplary for a first planning. The suitability and specification must be carried out in agreement with the planner in any case.

FAAC J275 HA 2K automatic retractable perimeter security bollard is recommended for intensive usage in perimeter security applications. Tested in accordance to ASTM F2656-07 standard (“Standard Test Method for Vehicle Crash Testing of Perimeter Barriers”), via software 3D simulation. J275 HA 2K main features are:: 1. Integrated Hydraulic Unit concept 2. Guaranteed for a high use frequency 3. Simple maintenance (can be performed by a single person) 4. Rapid and silent movements 5. Anti-burglar head (manual lowering device protected by armored keylock) 6. High resistance to impacts (M30 ranking in double installation) 7."Gentle Stop” function to grant soft stop on the limit switch

<p>The CHV-TSTATEX is a wireless thermostat featuring infiNET EX® technology. The CHV-TSTATEX installs just like a conventional thermostat because no extra wires are needed to connect to the control system. Although functional as a standalone thermostat, the CHV-TSTATEX delivers enhanced functionality as part of a complete Crestron® automation system. Integrating HVAC with a Crestron system can help lower energy bills and increase user friendliness.</p> <p>The CHV-TSTATEX is designed for one- or two-stage heating and one- or two-stage cooling control of baseboard, forced air, heat pump[1], and dual-fuel heat pump[1] HVAC systems. The large backlit LCD display provides a clear view of temperature, set point, system mode, fan mode, system status, and setup functions. Climate control features include separate heating and cooling set points, and adjustable anticipators to prevent overshooting the desired temperature. Continuous fan operation can be selected when needed for increased circulation.</p> <p>Fan Coil Unit Support<br>The CHV-TSTATEX-FCU model of the infiNET EX thermostat provides the functionality of controlling fan coil units[2]. Aesthetically identical to the base model, the CHV-TSTATEX-FCU has custom firmware, display programming and terminal labels designed for three-speed fan applications. The CHV-TSTATEX-FCU supports on/off control of the valves and the fan in four-pipe fan coil applications, eliminating the need for an additional device dedicated to controlling the fan coil unit itself. </p> <p>infiNET EX Communications<br>Ultra-reliable infiNET EX wireless technology provides steadfast two-way RF communications throughout a residential or commercial structure without the need for physical control wiring. Employing a 2.4 GHz mesh network topology, each infiNET EX device functions as an expander, passing command signals through to every other infiNET EX device within range (approximately 150 feet or 46 meters indoors), ensuring that every command reaches its intended destination without disruption[3].</p> <p>The CHV-TSTATEX communicates with a Crestron control system via an infiNET EX Wireless Gateway (model CEN-RFGW-EX, DIN-AP3MEX, or MC3[4]). Up to 100 infiNET EX devices may coexist on a single wireless network, and every non-battery-powered device that is added to the network effectively increases the range and stability of the entire network by providing multiple redundant signal paths[3]. Built-in Dynamic Frequency Allocation continuously monitors RF conditions, automatically selecting the clearest channel to prevent interference from neighboring networks, cordless phones, and microwaves. </p> <p>Automation System Integration<br>The wireless connection to the control system allows the functions of the CHV-TSTATEX to be controlled from touch screens, keypads, wireless remotes, computers, or even a mobile device. It supports unlimited flexibility for remote control, scheduling, and integration with other devices and systems. In the event that communication with the control system is disrupted for any reason, the CHV-TSTATEX will remain operable to control the HVAC system.</p> <p>Easy Installation<br>Because no control wires are required, the CHV-TSTATEX can be installed just like any conventional thermostat. To simplify installation, physical switches are provided for the most critical configuration options, including heat/cool type, heat pump behavior, power settings, number of heating/cooling stages, and fan options. These settings allow HVAC contractors to install and test the thermostats prior to the appearance of a Crestron system integrator. </p> <p>Remote Sensors<br>Optional remote temperature sensors can be connected to the CHV-TSTATEX for enhanced flexibility and optimized performance. Climate can be regulated according to an average of multiple sensors, or the built-in sensors can be disabled entirely to allow the CHV-TSTATEX to be installed out of view. For heat pump-type systems, outdoor temperature can be monitored to optimize system performance. Compatible sensors include the CHV-RTS and the CHV-RSS.</p> <p>Features<br>Summary Of Features </p> <p>Wall mount heat/cool thermostat for baseboard, forced air, and heat pump[1] HVAC systems<br>Crestron system integration via infiNET EX® wireless network<br>Saves on energy costs with advanced programming abilities <br>Supports two remote temperature sensors<br>Fail-safe mode allows operation in event of control system failure<br>Backlit LCD display<br>Fan coil unit control[2] (CHV-TSTATEX-FCU model only)<br>Available in white, black, or almond finish</p> <p>Notes: <br>1. Heat pump systems require an outdoor temperature sensor; contact Crestron for additional design assistance.<br>2. Four-pipe fan coil units are supported.<br>3. Any infiNET EX device that provides expander functionality will effectively extend the range of the wireless network beyond the initial range of the gateway. Battery-powered infiNET EX devices do not provide expander functionality. To achieve expander functionality, the CHV-TSTATEX must be connected to a 24-Volt power source. Wireless networks composed predominantly of battery-powered devices may need additional infiNET EX expanders, such as the CLW-EXPEX or GLA-EXPEX (sold separately), or other non-battery-powered infiNET EX devices to ensure proper functionality of the network and battery life for the devices. Refer to the Best Practices for Installation and Setup of Crestron RF Products, Doc. #6689 for complete system design guidelines, or contact Crestron True Blue Support for further assistance.<br>4. Item(s) sold separately.</p>

The Besam ASSA ABLOY SW100 is ideal for a wide range of environments and applications. The electro-mechanical operator is extremely quiet, flexible and innovative with unique features not found in other low energy operators including: stack pressure compensation, lock circuit retry, electronic dampening, battery convenience mode, test of safety sensors, power assist, obstruction control, and low power consumption. Disclaimer: This product is available from ASSA ABLOY Entrance Systems - North America. Consult a local representative in your Region to discuss availability.

Test regarding statistics