3D parametric, 2D view dependent, on-site construction suspended scaffolding

Parametric suspended ceiling object for design with editable panels and accessories. Ceiling panels can be placed in a customizable grid with various edge and border treatment presets. Panels can also be edited individually.

Parametric suspended ceiling object for design with editable panels and accessories. Ceiling panels can be placed in a customizable grid with various edge and border treatment presets. Panels can also be edited individually.

Parametric suspended ceiling object for design with editable panels and accessories. Ceiling panels can be placed in a customizable grid with various edge and border treatment presets. Panels can also be edited individually.

Parametric suspended ceiling object for design with editable panels and accessories. Ceiling panels can be placed in a customizable grid with various edge and border treatment presets. Panels can also be edited individually.

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Sahara Max

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Sahara A1

A wall mounted articulating boom system that provides the flexibility of a ceiling boom and the practicality of a headwall. Unit has an arm range of 190 degrees and 330 degree head rotation. Provides availability of retractable or fixed, single or double arms. Unit can supply up to 16 gas outlets and up to 40 line voltage receptacles and 12 low voltage provisions. Unit provides multiple bed/caregiver interface positions. A variety of accessories are available.

Suspended ceiling made up of a frame of galvanised sheet steel profiles over a base of Pladur® T-47/T-45 profiles hung from the framing by means of Pladur® T-47/T-45 clips + Ø 6 mm threaded rod, and supported by Pladur® profiles mechanically attached around the whole perimeter. One or two Pladur® plasterboards are screwed to this frame. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient joints, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a frame of galvanised sheet steel profiles over a base of Pladur® T-47/T-45 profiles or mullions hung from the framing by means of Pladur® standard reach brackets + Ø 6 mm threaded rod, and supported by Pladur® profiles attached mechanically along the whole perimeter. One or two Pladur® plasterboards are screwed to this frame. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient joints, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a frame of galvanised sheet steel profiles over a base of Pladur® TF profiles hung from the framing by means of Pladur® hangers + Ø 6 mm threaded rod, and supported on Pladur® profiles mechanically attached to the whole perimeter. One or two Pladur® plasterboards are screwed to this frame. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient joints, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a frame of galvanised sheet steel profiles over a base of Pladur® T-60 profiles hung from the framing by means of Pladur® T60 clips + Ø 6 mm threaded rod, and supported on Pladur® profiles attached mechanically around the whole perimeter. One or more Pladur® plasterboards are screwed to this frame. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient joints, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a frame of galvanised sheet steel profiles over a base of Pladur® hung from the framing by means of Pladur® hanger brackets + Ø 6 mm threaded rod, and supported on Pladur® channels mechanically attached around the whole perimeter. One or more Pladur® plasterboards are screwed to this frame. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient joints, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a twin frame of galvanised sheet steel profiles installed at different levels. The primary frame is made up of Pladur® PH-45 hung from the framing by means of Ø 6 mm threaded rod, nut and locking nut. The secondary frame is made up of Pladur® T-47/T-45 profiles fitted perpendicularly to the lower part of the primary frame by fitting directly on the double, die-cut hangers of the Pladur® PH-45 profile and supported around the perimeter on Pladur® angular profiles or U track Clip, which is attached mechanically along its whole length. One or more Pladur® plasterboards are screwed perpendicularly onto the secondary frame. Commensurate amounts of anchors, hangers, hangers, resilient/acoustic perimeter joints, joint compounds and tapes, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design.) Installed according to Pladur® recommendations, UNE 102043 and CTE requirements.

Suspended ceiling made up of a twin frame of galvanised sheet steel profiles installed at different levels (D). The primary frame is made up of Pladur® T-60 profiles hung from the framing by means of Pladur® T-60 hanger brackets and Ø 6 mm threaded rod. The secondary frame is made up of Pladur® T-60 profiles hung from the primary one by means of Pladur® channel intersection connector T-60 and supported around the perimeter with angular profiles o U track, which are attached mechanically around its whole length. One or more Pladur® plasterboards are screwed perpendicularly onto the secondary frame. Commensurate amounts of anchors, hangers, screws, resilient/acoustic perimeter joints, joint compounds and tapes, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a twin, primary and secondary, frame of Pladur® T-60 profiles in a "C" shape by means of the Pladur® H T-60 connection placed at the same level and suspended from the framing by means of Pladur® T-60 hanger brackets and Ø 6 mm threaded rod, supported on angular or U track profiles which are attached mechanically along the whole length. One or more Pladur® plasterboards are screwed perpendicularly onto the secondary frame. Commensurate amounts of anchors, hangers, hangers, screws, resilient/acoustic perimeter joints, joint compounds and tapes, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a twin frame of galvanised sheet steel profiles installed at different levels. The primary frame is made up of Pladur® GL U track with a thickness of 1.5 mm, hung from the framing by means of M-50 hangers and Ø 6 mm threaded rod with nut and locking nut. The second frame is made up of Pladur® T-47 profiles fitted to the primary frame by means of Pladur® channel connectors GL and supported around the perimeter on Pladur® angular profiles and U track Clip, which are attached mechanically along its whole length. One or two Pladur® plasterboards are screwed perpendicular to the secondary frame. Commensurate amounts of anchors, hangers, screws, resilient/acoustic perimeter joints, joint compound, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended bowl 52 x 36 cm - Without flap hole With enamelled flange Weight: 14 kg

Hanging bowl 54,4 x 36,1 cm - Weight: 17,5 kg

<p>*Available only in France*</p><p>Self-contained emergency luminaire with LED technology, with cylindrical body of painted aluminium with polycarbonate opal or transparent diffuser. Painted steel bracket for suspended mounting.</p>

<p>Self-contained emergency luminaire with LED technology, with cylindrical body of painted aluminium with polycarbonate opal or transparent diffuser. Painted steel bracket for suspended mounting.</p><p>Models:</p> <p>Non maintained: LENS N20 (S), LENS N30 (S), LENS N40 (S), LENS N70 (S), LENS 2N20 (S), LENS 2N30 (S), LENS 2N40 (S), LENS 2N70 (S), LENS 3N20 (S), LENS 3N30 (S), LENS 3N40 (S), LENS 3N70 (S)</p> <p>Maintained: LENS P20 (S), LENS P30 (S), LENS P40 (S), LENS P70 (S), LENS 2P20 (S), LENS 2P30 (S), LENS 2P40 (S), LENS 2P70 (S), LENS 3P20 (S), LENS 3P30 (S), LENS 3P40 (S), LENS 3P70 (S)</p> <p>Non maintained A/TCA: LENS N20 A/TCA (S), LENS N30 A/TCA (S), LENS N40 A/TCA (S), LENS N70 A/TCA (S), LENS 2N20 A/TCA (S), LENS 2N30 A/TCA (S), LENS 2N40 A/TCA (S), LENS 2N70 A/TCA (S), LENS 3N20 A/TCA (S), LENS 3N30 A/TCA (S), LENS 3N40 A/TCA (S), LENS 3N70 A/TCA (S)</p> <p>Maintained A/TCA: LENS P20 A/TCA (S), LENS P30 A/TCA (S), LENS P40 A/TCA (S), LENS P70 A/TCA (S), LENS 2P20 A/TCA (S), LENS 2P30 A/TCA (S), LENS 2P40 A/TCA (S), LENS 2P70 A/TCA (S), LENS 3P20 A/TCA (S), LENS 3P30 A/TCA (S), LENS 3P40 A/TCA (S), LENS 3P70 A/TCA (S)</p>

<p>Luminaire with LED technology, with cylindrical body of painted aluminium with polycarbonate opal or transparent diffuser. Painted steel bracket for suspended mounting. Supports AC and DC voltage. Suitable for centralised AC/DC power systems. Luminous flux in emergency suitable for centralised AC/DC power systems.</p><p>Models: Lens L20 (S), Lens L30 (S), Lens L40 (S), Lens L70 (S)<br></p>

<p>*Available only in France*</p><p>Luminaire with LED technology, with cylindrical body of painted aluminium with polycarbonate opal or transparent diffuser. Painted steel bracket for suspended mounting. Supports AC and DC voltage. Suitable for centralised AC/DC power systems. Luminous flux in emergency suitable for centralised AC/DC power systems.</p>

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Sahara dB

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Sahara Unperforated

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Sahara

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Sierra OP

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Sierra

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Solara

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Ultima+ dB

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Ultima+ OP

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Ultima+

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Bioguard Acoustic

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Bioguard Plain

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Casa

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Ceramaguard

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Colortone Dune

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Colortone Fine Fissured

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Dune dB

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Dune Max

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Dune Supreme Unperforated

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Dune Supreme

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Dune

#http://bimobject.com Armstrong Mineral Suspended Ceiling - HydroBoard

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Mezzanine DL100

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Optima

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Perla dB

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Perla OP 0,95

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Perla OP 1,00

#http://bimobject.com Armstrong Mineral Suspended Ceiling - Perla

The INDI family luminaries have a minimalistic and simple design. They consist of an aluminium profile and are fitted with LED boards with a high efficiency. There is a built-in suspension system in the luminary to which different components as hooks etc. can be inserted. They are distinguished by a soft light the intensity of which can be set up. They can be used separately or extended to long lines and other shapes. The luminary can be mounted as suspended, surface mounted or wall one . The luminaries are suitable for business and administrative premises, corridors, hotels, cultural facilities and households. Luminaires from INDI family are available from 2015. Type of installation: [LIST] Suspended [/LIST]

Luminaires from STEP family. Type of installation: [LIST] Surface Suspended [/LIST]

The INDI family luminaries have a minimalistic and simple design. They consist of an aluminium profile and are fitted with LED boards with a high efficiency. There is a built-in suspension system in the luminary to which different components as hooks etc. can be inserted. They are distinguished by a soft light the intensity of which can be set up. They can be used separately or extended to long lines and other shapes. The luminary can be mounted as suspended, surface mounted or wall one . The luminaries are suitable for business and administrative premises, corridors, hotels, cultural facilities and households. Luminaires from INDI family are available from 2015. Type of installation: [LIST] Surface Suspended Wall mounted [/LIST]

The INDI family luminaries have a minimalistic and simple design. They consist of an aluminium profile and are fitted with LED boards with a high efficiency. There is a built-in suspension system in the luminary to which different components as hooks etc. can be inserted. They are distinguished by a soft light the intensity of which can be set up. They can be used separately or extended to long lines and other shapes. The luminary can be mounted as suspended, surface mounted or wall one . The luminaries are suitable for business and administrative premises, corridors, hotels, cultural facilities and households. Luminaires from INDI family are available from 2015. Type of installation: [LIST] Surface Wall mounted [/LIST]

Luminaires from OVILI family. Type of installation: [LIST] Surface Suspended [/LIST]

Suspended plaster ceilings are usually made of plasterboard. In contrast, Metawell® jointless ceilings consist of aluminium sandwich panels, and because of the aluminium and copper used offer greater performance and a high response speed. The unusually lightweight support panel is very bending-resistant. Therefore, the grid dimension of the substructure can be double that of plasterboard panels. The advantages: greater flexibility with ceiling fixtures and a tighter meander layout. Metawell® panels offer many different edge finishes. They are provided at the butt joints with stop chamfers to ensure a perfectly levelled filling. Thanks to the extraordinarily flat surface, only the joints, not the entire panel area, need to be evened. Up to 110 W/sqm cooling performance (at 10 K under temperature). Additionally the product has an EPD (Environmental Product Declaration).

Quadrature® 2 ultra-flat single luminaire for suspended mounting | with ELDACON®, direct/indirect distribution, CAT2(L≤ 1000cd/m²) | with ECG | visible frame of anodised extruded aluminium, brushed vertical sides, highly specular underside; upper housing part of sheet steel, metallic grey (RAL 9006)

[LIST] Type: Manual sliding door system with self-closing function without external power supply. The door is opened and then closes under its own spring power – thanks to a bungee cord pulley system designed for glass doors up to 120 kg (single panel door) Opening: 1-Leaf, 2-Leaf, Telescopic Panel: Glass and timber with both light and heavy doors (50 kg–200 kg). Laminated safety glass (LSG) Damping: DORMOTION cushioning mechanism – panel is decelerated in both its opening and closing directions and then drawn automatically to the end position. No glass preparation Installation: Wall, ceiling, lintel, glass overpanel installation and suspended ceilings Side lights: Optional Standards: EN 1527 with 200.000 cycles The product will be available mid/end 2015 (depends on variant). [/LIST]

Metawell® modular ceilings do not require visible rails or longitudinal frames. Instead, the individual ceiling elements are suspended directly from a concealed substructure. The ceiling elements can be pushed together within a few millimetres to each other. Passive installation strips are placed on the ceiling elements for subsequent installation of partition walls. If necessary, they can be removed easily and the wall can be erected without affecting the ceiling structure. Due to the big dimension of ​​the ceiling panels, the hydraulic connection of the panels is not necessary, which minimizes installation errors and installation times significantly. Through visually offset installation panels and many options for appealing surface design, Metawell® modular ceilings allow the realisation of sophisticated design solutions. Additionally the product has an EPD (Environmental Product Declaration).

Monsun® LED damp-proof diffuser luminaire for ceiling surface-mounting, suspended mounting or mounting to mounting rail | direct wide distribution with ceiling illumination; with injection-moulded prismatic cover | with electronic ballast for Siteco® LED tube | housing of glass-fibre reinforced polyester, grey; cover of PMMA; V2A catches and ceiling mounting

NJ700 LED for ceiling surface or suspended mounting | with double reflector of aluminium; narrow or wide distribution | with ECG DALI*; with mounted 5-pole connection plug and enclosed socket | LED module support with cooling ribs and electrics module of diecast aluminium, mounting bracket of steel; all parts in Siteco® metallic grey (DB 702S); lateral support profiles of extruded aluminium, anodised; cover of safety glass

Novaluna® S LED single luminaire for suspended mounting | with ELDACON®, indirect/direct distribution, CAT2(L≤ 1500cd/m²) | with ECG DALI | housing of aluminium profile, brushed and anodised.

Surface mounted cubicle track, with curtain. Track constructed of thick extruded aluminum. Equipped with self lubricating carriers, beaded drop chain hooks, and flame resistant curtain. To include removable end caps. Designed to be suspended around patient areas where privacy is needed. Price listed is per foot of the track, curtains to be priced per quote.

Ceiling or wall mounted single channel cord drapery track. Adjustable with mounted brackets and slides. Dimensions and shape as required. Unit consists of a thick extruded aluminum track. Equipped with self-lubricating carriers, beaded drop chain, hooks, removable end caps, and curtain. Designed to be suspended around patient areas where privacy is needed. Price listed is per foot of the track, curtains to be priced per quote.

Single compartment stainless steel sink, drop-in, self-rimming, ledge-type, connected with a drain and provided with a mixing faucet. It shall also be provided with pre-punched fixture holes on 4" center, integral back ledge to accommodate deck-mounted fixtures, brushed/polished interior and top surfaces, and sound deadened. Recommended for use in suspended or U/C/B sink cabinets having a high plastic laminate or Chemsurf laminate countertop/work surface. For general purpose use throughout the facility.

Single compartment stainless steel sink, drop-in, self-rimming, ledge-type, connected with a drain and provided with a mixing faucet. It shall also be provided with pre-punched fixture holes on 4" center, integral back ledge to accommodate deck-mounted fixtures, brushed/polished interior and top surfaces, and sound deadened. Recommended for use in suspended or U/C/B sink cabinets having a high plastic laminate or Chemsurf laminate countertop/work surface. Coordinate actual outside sink dimensions with the actual clear dimension of cabinet specified to ensure that they are compatible. For general purpose use throughout the facility.

Single compartment stainless steel sink, drop-in, self-rimming, ledge-type, connected with a drain and provided with a mixing faucet. It shall also be provided with pre-punched fixture holes on 4" center, integral back ledge to accommodate deck-mounted fixtures, brushed/polished interior and top surfaces, and sound deadened. Recommended for use in suspended or U/C/B sink cabinets having a high plastic laminate or Chemsurf laminate countertop/work surface. Coordinate actual outside sink dimensions with the actual clear dimension of cabinet specified to ensure that they are compatible. For general purpose use throughout the facility.

Single compartment stainless steel sink, drop-in, self-rimming, ledge-type, connected with a drain and provided with a mixing faucet. It shall also be provided with pre-punched fixture holes on 4" center, integral back ledge to accommodate deck-mounted fixtures, brushed/polished interior and top surfaces, and sound deadened. Recommended for use in suspended or U/C/B sink cabinets having a high plastic laminate or Chemsurf laminate countertop/work surface. Coordinate actual outside sink dimensions with the actual clear dimension of cabinet specified to ensure that they are compatible. For general purpose use throughout the facility.

Single compartment stainless steel sink, drop-in, self-rimming, ledge-type, connected with a drain and provided with a mixing faucet. It shall also be provided with punched fixture holes on 4" center, integral back ledge to accommodate deck-mounted fixtures, brushed/polished interior and top surfaces, and sound deadened. Recommended for use in suspended or U/C/B sink cabinets having a high plastic laminate or Chemsurf laminate countertop/work surface. Coordinate actual outside sink dimensions with the actual clear dimension of cabinet specified to ensure that they are compatible. For general purpose use throughout the facility.

Single compartment stainless steel sink, drop-in, self-rimming, ledge-type, connected with a drain and provided with a mixing faucet. It shall also be provided with pre-punched fixture holes on 4" center, integral back ledge to accommodate deck-mounted fixtures, brushed/polished interior and top surfaces, and sound deadened. Recommended for use in suspended or U/C/B sink cabinets having a high plastic laminate or Chemsurf laminate countertop/work surface. Coordinate actual outside sink dimensions with the actual clear dimension of cabinet specified to ensure that they are compatible. For general purpose use throughout the facility.

Single compartment stainless steel sink, drop-in, self-rimming, ledge-type, connected with a drain and provided with a mixing faucet. It shall also be provided with pre-punched fixture holes on 4" center, integral back ledge to accommodate deck-mounted fixtures, brushed/polished interior and top surfaces, and sound deadened. Recommended for use in suspended or U/C/B sink cabinets having a high plastic laminate or Chemsurf laminate countertop/work surface. Coordinate actual outside sink dimensions with the actual clear dimension of cabinet specified to ensure that they are compatible. For general purpose use throughout the facility.

Single compartment stainless steel sink, drop-in, self-rimming, ledge-type, connected with a drain and provided with a mixing faucet. It shall also be provided with pre-punched fixture holes on 4" center, integral back ledge to accommodate deck-mounted fixtures, brushed/polished interior and top surfaces, and sound deadened. Recommended for use in suspended or U/C/B sink cabinets having a high plastic laminate or Chemsurf laminate countertop/work surface. Coordinate actual outside sink dimensions with the actual clear dimension of cabinet specified to ensure that they are compatible. For general purpose use throughout the facility.

Double compartment stainless steel sink, drop-in, self-rimming, ledge-type, connected with a drain and provided with a mixing faucet. It shall also be provided with pre-punched fixture holes on 4" center, integral back ledge to accommodate deck-mounted fixtures, brushed/polished interior and top surfaces, and sound deadened. Recommended for use in suspended or U/C/B sink cabinets having a high plastic laminate or Chemsurf laminate countertop/work surface. Coordinate actual outside sink dimensions with the actual clear dimension of cabinet specified to ensure that they are compatible. For general purpose use throughout the facility.

One-piece cast epoxy resin sink (composition of molded epoxy resins and inert materials) connected with a drain and provided with a mixing faucet. For use in suspended or U/C/B sink cabinets and mounted under the epoxy resin countertops/work surfaces found in lab areas requiring optimum physical chemical resisting properties. For general purpose use in a lab area.

Dental operating light used to illuminate the field of work. This is a single light unit on a cantilever arm mounted from a column which is suspended from a moving trolley in a ceiling track. The light can be used in installations where the ceiling height is between 8 and 10.5 feet; some units can mount to ceilings as high as 13 feet. Database physical dimensions refer to the light's maximum travel dimensions centered on the ceiling mounting track. The database weight includes the light, arm and trolley. Mounting this light may require reinforcing the ceiling or hanging the mount from the underside of the slab above a suspended ceiling.

Dental operating light. The unit is a dual ceiling column mount with variable intensity control. The light illuminates the field of work for the dentist. Most units require the ceiling to be between 8 and 10.5 feet for installation. Each head is on a cantilever arm mounted from a column which is suspended from the ceiling. The database physical dimensions refer to the maximum extension of the light on its mount.

Ceiling mounted surgical light generally 30-34" or larger in diameter depending on manufacturer. Light head is suspended from the ceiling by a mounting plate and pole. Light head contains several individual pods each with its own light source. Unit also has a detachable sterilizable handle. Minimum ceiling height for most models is 8'-9"; check the manufacturers' specific recommendations. Height dimension below refers to the height of the lamp housing. Width and depth are the length of the swing arm plus the light head diameter. This light is suitable for dual site surgery.

This system is specifically designed to perform radiographic examinations in the Radiology Department. This units characteristics and components include, 65 kW micro-processor controlled X-ray generator, non-tilting table with a horizontally adjustable bucky and floating table top, ceiling suspended 0.6/1.0 mm tube unit and vertical bucky stand.

This system is specifically designed to perform biplane radiographic/fluoroscopic examinations in the Special Procedures Department. On-line digital angio image processing will provide instant availability of images for review. This units characteristics and components include: 100 kW micro-processor controlled X-ray generators, C-arm and U arm with 9” multi-field Image Intensifier, integrated X-ray tube unit. The Digital Spot Imaging for both the AP and Lateral planes shall consist of a computer, keyboard with acquisition and viewing monitor and a slave monitor. The system shall be DICOM 3.0 compatible, for easy linkage to filmless image management systems and review stations. It is recommended that the TV monitors be ceiling suspended.

This system is specifically designed to perform radiographic/fluoroscopic examinations in the Radiology Department. On-line digital image processing will provide instant availability of images for review via infrared remote control. This units characteristics and components include, 80 kW micro-processor controlled X-ray generator, remote-controlled 90/90 table with 15” multi-field Image Intensifier and integrated tube support. The Digital Spot Imaging consists of a computer, keyboard with acquisition, viewing monitor and a slave monitor. The system shall be DICOM 3.0 compatible, for easy linkage to filmless image management systems and review stations. It is recommended that the TV monitors be ceiling suspended.

This system is specifically designed to perform biplane radiographic/fluoroscopic examinations in the Cardiology Department. On-line digital cardiac image processing will provide instant availability of images for review. This units characteristics and components include 100 kW micro-processor controlled X-ray generators, C-arm and U arm with 9” multi-field Image Intensifier, integrated X-ray tube unit and cine camera. The Digital Imaging for both the AP and Lateral planes shall consists of a computer, keyboard with acquisition, viewing monitor, and slave monitor. The system shall be DICOM 3.0 compatible, for easy linkage to filmless image management systems and review stations. It is recommended that the TV monitors be ceiling suspended. System to be procured with Cardiac Cath Lab computerized analysis/monitoring system.

This system is specifically designed to perform digital radiographic/fluoroscopic examinations in the Urology Department. The characteristics and components include a 80 kW micro-processor controlled x-ray generator, urological table with integrated tube stand, 16 inch multi-field Image Intensifier (I.I.), video chain, disc recorder and required accessories. The Digital Spot Imaging consists of a computer, keyboard with acquisition and viewing monitor and a slave monitor. The system shall be DICOM 3.0 compatible or latest version, for easy linkage to filmless image management systems and review stations. TV monitors shall be tower mounted or suspended from the ceiling.

Ecophon Solo Circle XL is an acoustic solution, primarily when it is not possible to install a wall-to-wall ceiling. Solo Circle XL is suitable in buildings where the room volume could be maintained or as an option when TABS (Thermally Activated Building System) is selected as cooling system. Solo Circle XL is an unframed free hanging unit. The unit is suspended with Adjustable wire hangers which are attached to Connect Main runners. This, in combination with, the engineered Connect Absorber anchor (patent) give opportunities to create several layers. The Solo Circle XL panel consists of two semicircles. The complete panel is available in size Ø1600x40 mm with a weight of 8 kg. The panel is manufactured from high density glass wool, with Akutex™ FT surface on both sides. The edges are straight cut and painted.

Suspended brazier for hotel, spa, retail, exclusive homes

Suspended brazier for hotel, spa, retail,exclusive homes

Suspended brazier for hotel, spa, retail,exclusive homes

Premium Easymatic movable wall, parking position Z8/L – Perfect in form and function. The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 57 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate.

Premium Classic movable wall, parking position Z8/L - Perfect in form and function The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 59 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate. It is also possible to provide the walls with fire and smoke protection. The semiautomatic Nüsing EASYmatic® system offers you increased comfort and user-friendliness.

Premium Easymatic movable wall, parking position Z2/K – Perfect in form and function. The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 57 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate.

Premium Classic movable wall, parking position Z2/K - Perfect in form and function The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 59 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate. It is also possible to provide the walls with fire and smoke protection. The semiautomatic Nüsing EASYmatic® system offers you increased comfort and user-friendliness.

Premium Easymatic movable wall, parking position Z3/K – Perfect in form and function. The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 57 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate.

Premium Classic movable wall, parking position Z3/K - Perfect in form and function The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 59 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate. It is also possible to provide the walls with fire and smoke protection. The semiautomatic Nüsing EASYmatic® system offers you increased comfort and user-friendliness.

Premium Easymatic movable wall, parking position Z4/K – Perfect in form and function. The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 57 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate.

Premium Classic movable wall, parking position Z4/K - Perfect in form and function The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 59 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate. It is also possible to provide the walls with fire and smoke protection. The semiautomatic Nüsing EASYmatic® system offers you increased comfort and user-friendliness.

Suspended ceilings are primarily used to regulate the acoustics in the room and reduce noise between rooms. In addition, they have an aesthetic function by hiding technical installations in the ceilings. The Concept ceiling panels are particularly appropriate where one wants a high degree of flexibility in connection with good noise reduction between rooms. The tiles are wet pressed mineral fiber plates with white painted acoustic fleece on the underside. The Concept ceiling consists of four plate varieties with different acoustic properties but with identical surface so that they can be exchanged in same premises.

Suspended direct-indirect LED profile ''Changes by turning''. Night & Day is designed for spaces where one line isn’t what you need. By joining two functionalities (direct & indirect) in a new way, you will get a flexible product that changes by turning. It brings a distinctive look and once installed is never the same. It can be used as a single luminaire or in composition, allowing new possibilities of applications. Design: Serge & Robert Cornelissen

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

HCONTROL HYBRID is a reflective vapour control layer layer with a built-in thermal performance for use on the warm side of any insulation material, behind the internal finish in roofs, walls and suspended floors. HCONTROL HYBRID provides dual performance within a single product : a vapour control layer and insulation, allowing a reduction in the number of installation steps whilst reducing the thickness of the main insulation to achieve the same required U-Value. It can be used in conjunction with any type of insulation. HCONTROL HYBRID is available in rolls of 10m2 (1600mm wide), 45mm thick.

BOOST'R HYBRID is a reflective breathable membrane with a built-in thermal performance for use on the cold-side of the building fabric in roofs, walls and suspended floors. BOOST’R HYBRID provides dual properties within a single product : A breathable membrane and insulation, allowing a reduction in the number of installation steps whilst reducing the thickness of the main insulation to achieve the same required U-Value. It can be used in conjunction with any type of insulation. BOOST'R HYBRID is available in rolls of 10m2 (1500 mm wide), 35mm thick.

Reverb is a visually appealing and practical ceiling-mounted sound absorber. The hole in the sound absorber lets light through from existing light fittings or gives you the opportunity of suspending light fittings through it. This means that Reverb is ideal for hanging over meeting places, workspaces or along a corridor. Reverb is made in compression-moulded polyester fibres in 10 different colors of Stay fabric from Gabriel. Choose from two hanging options: one wire with a knot or three wires. Three wires are recommended if a light fitting is going to be suspended through the hole. The wires are two metres long and we recommend hanging the sound absorber 1900 mm above the floor.

Aluminium suspended raster ceilings are an alternative to other types of suspended ceilings. Raster ceilings, in addition to their unquestionable aesthetic values, are non-flammable and non dripping in case of fire, and they do not interfere with technical installations such as air conditioning, ventilation systems, electrical and telecommunication wirings. Due to the open nature of the raster ceiling, any fire protection system, both signalling and sprinkling can be installed above the suspended ceiling. Suspended raster ceilings are also lightweight and easy to install. Due to these features, suspended raster ceilings are increasingly used in objects such as banks, offices, shopping malls and showrooms, airports and railway stations, etc. Open cell ceiling components are manufactured by BARWA SYSTEM Sp. z o.o., with high quality pre-finished aluminium sheet with a thickness from 0.43 to 0.6 mm. Varnish is applied to pre-treated aluminium tapes with the use of double-layer “Coil Coating” method, and then baked.

PP200 vertical panels are functional interior finishing elements, dedicated to large rooms with high noise level, such as airports, waiting rooms, entry halls, conference rooms, restaurants, dining halls and manufacturing halls of high noise intensity. Due to the open nature of panel ceilings, any fire protection system both sprinkling and signalling can be installed above the suspended ceiling. Open cell ceilings are also lightweight and easy to install. The PP ceiling elements are manufactured by the BARWA SYSTEM SP. z o.o. using top quality, factory-painted aluminium sheet metal. Varnish is applied in powder on specially pre-treated aluminium tapes.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS 40mm thickness is available in 1200mm wide rolls.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is an new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

Luminaire formed by three independent modules: optical group, electronic system and batteries. Two lens options: escape route and open area. The "escape route" optical group allows a greater placement inter-distance in places such as corridors, achieving adequate lighting in evacuation routes. Suitable for flush mounting on suspended ceiling.

Luminaire formed by three independent modules: optical group, electronic system and batteries. Two lens options: escape route and open area. The "escape route" optical group allows a greater placement inter-distance in places such as corridors, achieving adequate lighting in evacuation routes. Suitable for flush mounting on suspended ceiling. Provides LED light source that illuminates on power failure.

Luminaire formed by three independent modules: optical group, electronic system and batteries. Two lens options: escape route and open area. The "escape route" optical group allows a greater placement inter-distance in places such as corridors, achieving adequate lighting in evacuation routes. Suitable for flush mounting on suspended ceiling. Provides LED light source that illuminates whether or not there is mains power supply. Includes two power inputs, LUM and EMERG, which enables the luminaire to be turned off at the mains.

Luminaire formed by three independent modules: optical group, electronic system and batteries. Two lens options: escape route and open area. The "escape route" optical group allows a greater placement inter-distance in places such as corridors, achieving adequate lighting in evacuation routes. Suitable for flush mounting on suspended ceiling. Provides LED light source that illuminates on power failure.

Luminaire formed by three independent modules: optical group, electronic system and batteries. Two lens options: escape route and open area. The "escape route" optical group allows a greater placement inter-distance in places such as corridors, achieving adequate lighting in evacuation routes. Suitable for flush mounting on suspended ceiling. Provides LED light source that illuminates on power failure.

Luminaire formed by three independent modules: optical group, electronic system and batteries. Two lens options: escape route and open area. The "escape route" optical group allows a greater placement inter-distance in places such as corridors, achieving adequate lighting in evacuation routes. Suitable for flush mounting on suspended ceiling. Provides LED light source that illuminates on power failure.

Luminaire formed by three independent modules: optical group, electronic system and batteries. Two lens options: escape route and open area. The "escape route" optical group allows a greater placement inter-distance in places such as corridors, achieving adequate lighting in evacuation routes. Suitable for flush mounting on suspended ceiling. Provides LED light source that illuminates whether or not there is mains power supply.

Luminaire formed by three independent modules: optical group, electronic system and batteries. Two lens options: escape route and open area. The "escape route" optical group allows a greater placement inter-distance in places such as corridors, achieving adequate lighting in evacuation routes. Suitable for flush mounting on suspended ceiling. Provides LED light source that illuminates on power failure.

Luminaire formed by three independent modules: optical group, electronic system and batteries. Two lens options: escape route and open area. The "escape route" optical group allows a greater placement inter-distance in places such as corridors, achieving adequate lighting in evacuation routes. Suitable for flush mounting on suspended ceiling. Provides LED light source that illuminates on power failure.

Luminaire formed by three independent modules: optical group, electronic system and batteries. Two lens options: escape route and open area. The "escape route" optical group allows a greater placement inter-distance in places such as corridors, achieving adequate lighting in evacuation routes. Suitable for flush mounting on suspended ceiling. Provides LED light source that illuminates whether or not there is mains power supply.

Luminaire formed by three independent modules: optical group, electronic system and batteries. Two lens options: escape route and open area. The "escape route" optical group allows a greater placement inter-distance in places such as corridors, achieving adequate lighting in evacuation routes. Suitable for flush mounting on suspended ceiling. Provides LED light source that illuminates whether or not there is mains power supply.

Luminaire formed by three independent modules: optical group, electronic system and batteries. Two lens options: escape route and open area. The "escape route" optical group allows a greater placement inter-distance in places such as corridors, achieving adequate lighting in evacuation routes. Suitable for flush mounting on suspended ceiling.

Signalling and evacuation luminaires. Consists of an aluminium section and a signalling plate 320x160 mm, composed of two sheets manufactured in thermomoulded PETG with digitally printed sign and diffuser film. The profile that houses the battery and electronic circuit is recessed in the suspended ceiling and secured with a screw-mounting system. Luminance of 500 cd/m² in contrast white, with or without mains supply. Indoor IP65. They supply permanent signalling using LED technology.

Signalling and evacuation luminaires. Consists of an aluminium section and a signalling plate 320x160 mm, composed of two sheets manufactured in thermomoulded PETG with digitally printed sign and diffuser film. The profile that houses the battery and electronic circuit is ceiling-mounted and the signalling plate is suspended. Luminance of 500 cd/m² in contrast white, with or without mains supply. Indoor IP65. They supply permanent signalling using LED technology.

Signalling and evacuation luminaires. Consists of an aluminium section and a signalling plate 320x160 mm, composed of two sheets manufactured in thermomoulded PETG with digitally printed sign and diffuser film. The profile that houses the battery and electronic circuit is recessed in the suspended ceiling and secured with a screw-mounting system. Luminance of 500 cd/m² in contrast white, with or without mains supply. Indoor IP65. They supply permanent signalling using LED technology.

Signalling and evacuation luminaires. Consists of an aluminium section and a signalling plate 320x160 mm, composed of two sheets manufactured in thermomoulded PETG with digitally printed sign and diffuser film. The profile that houses the battery and electronic circuit is ceiling-mounted and the signalling plate is suspended. Luminance of 500 cd/m² in contrast white, with or without mains supply. Indoor IP65. They supply permanent signalling using LED technology.

Signalling and evacuation luminaires. Consists of an aluminium section and a signalling plate 320x160 mm, composed of two sheets manufactured in thermomoulded PETG with digitally printed sign and diffuser film. The profile that houses the battery and electronic circuit is recessed in the suspended ceiling and secured with a screw-mounting system. Luminance of 500 cd/m² in contrast white, with or without mains supply. Indoor IP65. They supply permanent signalling using LED technology.

Signalling and evacuation luminaires. Consists of an aluminium section and a signalling plate 320x160 mm, composed of two sheets manufactured in thermomoulded PETG with digitally printed sign and diffuser film. The profile that houses the battery and electronic circuit is ceiling-mounted and the signalling plate is suspended. Luminance of 500 cd/m² in contrast white, with or without mains supply. Indoor IP65. They supply permanent signalling using LED technology.

Signalling and evacuation luminaires. Consists of an aluminium section and a signalling plate 320x160 mm, composed of two sheets manufactured in thermomoulded PETG with digitally printed sign and diffuser film. The profile that houses the battery and electronic circuit is recessed in the suspended ceiling and secured with a screw-mounting system. Luminance of 500 cd/m² in contrast white, with or without mains supply. Indoor IP65. They supply permanent signalling using LED technology.

Signalling and evacuation luminaires. Consists of an aluminium section and a signalling plate 320x160 mm, composed of two sheets manufactured in thermomoulded PETG with digitally printed sign and diffuser film. The profile that houses the battery and electronic circuit is ceiling-mounted and the signalling plate is suspended. Luminance of 500 cd/m² in contrast white, with or without mains supply. Indoor IP65. They supply permanent signalling using LED technology.

Signalling and evacuation luminaires. Consists of an aluminium section and a signalling plate 320x160 mm, composed of two sheets manufactured in thermomoulded PETG with digitally printed sign and diffuser film. The profile that houses the battery and electronic circuit is recessed in the suspended ceiling and secured with a screw-mounting system. Luminance of 500 cd/m² in contrast white, with or without mains supply. Indoor IP65.

Signalling and evacuation luminaires. Consists of an aluminium section and a signalling plate 320x160 mm, composed of two sheets manufactured in thermomoulded PETG with digitally printed sign and diffuser film. The profile that houses the battery and electronic circuit is ceiling-mounted and the signalling plate is suspended. Luminance of 500 cd/m² in contrast white, with or without mains supply. Indoor IP65.

Signalling and evacuation luminaires. Consists of an aluminium section and a signalling plate 220x220 mm, composed of two sheets manufactured in thermomoulded PETG with digitally printed sign and diffuser film. The profile that houses the battery and electronic circuit is recessed in the suspended ceiling and secured with a screw-mounting system. Luminance of 500 cd/m² in contrast white, with or without mains supply. Indoor IP65. They supply permanent signalling using LED technology.

Signalling and evacuation luminaires. Consists of an aluminium section and a signalling plate 220x220 mm, composed of two sheets manufactured in thermomoulded PETG with digitally printed sign and diffuser film. The profile that houses the battery and electronic circuit is ceiling-mounted and the signalling plate is suspended. Luminance of 500 cd/m² in contrast white, with or without mains supply. Indoor IP65. They supply permanent signalling using LED technology.

Signalling and evacuation luminaires. Consists of an aluminium section and a signalling plate 220x220 mm, composed of two sheets manufactured in thermomoulded PETG with digitally printed sign and diffuser film. The profile that houses the battery and electronic circuit is recessed in the suspended ceiling and secured with a screw-mounting system. Luminance of 500 cd/m² in contrast white, with or without mains supply. Indoor IP65. They supply permanent signalling using LED technology.

Signalling and evacuation luminaires. Consists of an aluminium section and a signalling plate 220x220 mm, composed of two sheets manufactured in thermomoulded PETG with digitally printed sign and diffuser film. The profile that houses the battery and electronic circuit is ceiling-mounted and the signalling plate is suspended. Luminance of 500 cd/m² in contrast white, with or without mains supply. Indoor IP65. They supply permanent signalling using LED technology.

Signalling and evacuation luminaires. Consists of an aluminium section and a signalling plate 220x220 mm, composed of two sheets manufactured in thermomoulded PETG with digitally printed sign and diffuser film. The profile that houses the battery and electronic circuit is recessed in the suspended ceiling and secured with a screw-mounting system. Luminance of 500 cd/m² in contrast white, with or without mains supply. Indoor IP65. They supply permanent signalling using LED technology.

Signalling and evacuation luminaires. Consists of an aluminium section and a signalling plate 220x220 mm, composed of two sheets manufactured in thermomoulded PETG with digitally printed sign and diffuser film. The profile that houses the battery and electronic circuit is ceiling-mounted and the signalling plate is suspended. Luminance of 500 cd/m² in contrast white, with or without mains supply. Indoor IP65. They supply permanent signalling using LED technology.

Signalling and evacuation luminaires. Consists of an aluminium section and a signalling plate 220x220 mm, composed of two sheets manufactured in thermomoulded PETG with digitally printed sign and diffuser film. The profile that houses the battery and electronic circuit is recessed in the suspended ceiling and secured with a screw-mounting system. Luminance of 500 cd/m² in contrast white, with or without mains supply. Indoor IP65. They supply permanent signalling using LED technology.

Signalling and evacuation luminaires. Consists of an aluminium section and a signalling plate 220x220 mm, composed of two sheets manufactured in thermomoulded PETG with digitally printed sign and diffuser film. The profile that houses the battery and electronic circuit is ceiling-mounted and the signalling plate is suspended. Luminance of 500 cd/m² in contrast white, with or without mains supply. Indoor IP65. They supply permanent signalling using LED technology.

Signalling and evacuation luminaires. Consists of an aluminium section and a signalling plate 220x220 mm, composed of two sheets manufactured in thermomoulded PETG with digitally printed sign and diffuser film. The profile that houses the battery and electronic circuit is recessed in the suspended ceiling and secured with a screw-mounting system. Luminance of 500 cd/m² in contrast white, with or without mains supply. Indoor IP65.

Signalling and evacuation luminaires. Consists of an aluminium section and a signalling plate 220x220 mm, composed of two sheets manufactured in thermomoulded PETG with digitally printed sign and diffuser film. The profile that houses the battery and electronic circuit is ceiling-mounted and the signalling plate is suspended. Luminance of 500 cd/m² in contrast white, with or without mains supply. Indoor IP65.

Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.

Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.

Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.

Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.

Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.

Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.

Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.

Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.

Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.

Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.

Plasterboards can be used to the construction of interior and exterior walls. They are of particular use in the repair of all types of buildings. The surface of the drywall is smooth and forms a perfect base for further finishing works. Plasterboards can be fixed to the wall with plasterboard adhesive or directly on the steel framework using steel partitions. By using plasterboard it is possible to increase the protection for fire resistance of the load-bearing walls of the building up to EI120 class. Building such constructions with an additional layer of mineral wool increases the acoustic and thermal insulation of the external walls. The interior walls are used to separate the individual rooms in the building and, depending on their functions, they meet stringent requirements in terms of statics, acoustics and fire protection. Partition walls are mostly made of drywall systems of profiles with different width dimensions: 50, 75 or 100 mm with a single or double layer of plasterboard or cement board. The materials used to make partition walls have important properties, such as acoustic insulation, fire insulation and moisture resistance; they also must be easy to install and remove to ensure the highest comfort of the room. Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation. A casing systems of risers is used to hide all kinds of installations in a building. Due to the possibility of smoke or fire spreading to other levels of the building, the risers must be adequately protected. For this purpose, systems based on 12.5 mm, 15 mm, 20 mm or 25 mm plasterboards are used. The plasterboards are fixed to the intermediate support structure or directly to the walls and ceiling. The casing systems of risers using plasterboards help protect against the spread of fire to the EI 120 fire resistance class. An additional feature of these systems is possible acoustic protection from sounds coming from inside the shaft, caused for example by air flow, sanitation system or vibration of the installation.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

Fermacell Cement Bonded Boards - One Man Boards – Square Edge - Standard Boards – Square Edge - Tapered Edge Boards – Tapered On 2 Sides Fermacell Powerpanel H2O is a cement-bound light-weight construction panel with a sandwich structure and two-layer top layer reinforcement made of alkali-resistant glass lattice fabric. They offer a lot of advantages in highly humid wall and ceiling constructions. Areas of application envisaged: - interior applications for walls and ceilings, such as       - domestic wet rooms (e.g., bathrooms, showers)       - public areas (e.g., swimming pools, sanitation, wellness areas)       - commercial areas (for example, dairies, breweries, large kitchens) - External applications       - Undercover       - Suspended ventilated façade Product advantages: - Predestined for wet areas - Extremely stable and light - Easy to process - Easy to attach - Economical adhesive joints - surface filling For use in highly chemically stressed areas, please contact the technical consultants of Fermacell GmbH.

[LIST] The innovative MONO® Acoustic system combines the elegance of a seamless ceiling and wall lining with high performance acoustics. All the benefits of a stone wool ceiling: excellent acoustic performance, fire protection and easy integration of all services. Installed directly or suspended, the perfect design solution for new-build or renovation projects. [/LIST]

[LIST] The innovative MONO® Acoustic system combines the elegance of a seamless ceiling and wall lining with high performance acoustics. All the benefits of a stone wool ceiling: excellent acoustic performance, fire protection and easy integration of all services. Installed directly or suspended, the perfect design solution for new-build or renovation projects. [/LIST]

[LIST] The innovative MONO® Acoustic system combines the elegance of a seamless ceiling and wall lining with high performance acoustics. All the benefits of a stone wool ceiling: excellent acoustic performance, fire protection and easy integration of all services. Installed directly or suspended, the perfect design solution for new-build or renovation projects. [/LIST]

[LIST] Innovative and aesthetically pleasing frameless acoustic islands offering excellent sound absorption. Quick and easy to install, used alone or when a traditional suspended ceiling cannot be installed. Available in square, rectangular or shaped formats with bevelled edges for maximum design freedom, plus in an unlimited number of custom colours using NSC. Perfect for thermal mass installations with rear surface providing excellent heat and light reflection. [/LIST]

[LIST] Innovative and aesthetically pleasing frameless acoustic islands offering excellent sound absorption. Quick and easy to install, used alone or when a traditional suspended ceiling cannot be installed. Available in square, rectangular or shaped formats with bevelled edges for maximum design freedom, plus in an unlimited number of custom colours using NSC. Perfect for thermal mass installations with rear surface providing excellent heat and light reflection. [/LIST]

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

[LIST] Innovative and aesthetically pleasing frameless acoustic islands offering excellent sound absorption. Quick and easy to install, used alone or when a traditional suspended ceiling cannot be installed. Available in square, rectangular or shaped formats with bevelled edges for maximum design freedom, plus in an unlimited number of custom colours using NSC. Perfect for thermal mass installations with rear surface providing excellent heat and light reflection. [/LIST]

[LIST] Innovative and aesthetically pleasing frameless acoustic islands offering excellent sound absorption. Quick and easy to install, used alone or when a traditional suspended ceiling cannot be installed. Available in square, rectangular or shaped formats with bevelled edges for maximum design freedom, plus in an unlimited number of custom colours using NSC. Perfect for thermal mass installations with rear surface providing excellent heat and light reflection. [/LIST]

Submersible electric pumps in AISI 304 stainless steel for foul waste water. Used for: • Evacuation of civil and industrial waste water • Drying wells and excavations • Draining underground areas • Handling fluids containing suspended solids / filaments • Draining infiltration water • Handling foul waste water (domestic services) • Draining cesspits

Suspended ceiling made up of a frame of galvanised sheet steel profiles over a base of Pladur® T-60 profiles set 300 mm apart, properly hung from the framing by means of Pladur® T-60 hanger brackets + Ø 6 mm threaded rod, and supported on Pladur® profiles attached mechanically around the whole perimeter. Pladur® Fon+ plasterboards are screwed to this frame. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient joints, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a twin frame of galvanised sheet steel profiles installed at different levels (D). The primary frame is made up of Pladur® T-60 profiles hung from the framing by means of Pladur® T-60 hanger brackets and Ø 6 mm threaded rod. The secondary frame is made up of Pladur® T-60 profiles spaced 300 mm apart, hung from the primary frame by means of Pladur® T-60 hanger brackets supported around the perimeter on angular or U track profiles which are attached mechanically along their whole length. Pladur® Fon+ plasterboards are screwed perpendicularly onto the secondary frame. Commensurate amounts of anchors, hangers, hangers, screws, resilient/acoustic perimeter joints, joint compounds and tapes, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a frame of galvanised sheet steel profiles covered with a pre-lacquered laminate on its face side. This frame forms a square 600 mm x 600 mm composed of primary, secondary and angular Pladur® galvanised sheet steel profiles attached mechanically around the whole perimeter. The frame is hung from the framing by means of anchors, threaded bar and pieces of Pladur® TR, on which the Pladur® Fon+ Decor plasterboards are supported. Commensurate amounts of anchors, hangers, hangers, etc. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Premium Easymatic movable wall, parking position Z8/L – Perfect in form and function. The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 57 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate.

Premium Classic movable wall, parking position Z8/L - Perfect in form and function The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 59 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate. It is also possible to provide the walls with fire and smoke protection. The semiautomatic Nüsing EASYmatic® system offers you increased comfort and user-friendliness.

Premium Easymatic movable wall, parking position Z2/K – Perfect in form and function. The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 57 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate.

Premium Classic movable wall, parking position Z2/K - Perfect in form and function The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 59 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate. It is also possible to provide the walls with fire and smoke protection. The semiautomatic Nüsing EASYmatic® system offers you increased comfort and user-friendliness.

Premium Easymatic movable wall, parking position Z3/K – Perfect in form and function. The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 57 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate.

Premium Classic movable wall, parking position Z3/K - Perfect in form and function The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 59 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate. It is also possible to provide the walls with fire and smoke protection. The semiautomatic Nüsing EASYmatic® system offers you increased comfort and user-friendliness.

Premium Easymatic movable wall, parking position Z4/K – Perfect in form and function. The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 57 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate.

Premium Classic movable wall, parking position Z4/K - Perfect in form and function The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 59 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate. It is also possible to provide the walls with fire and smoke protection. The semiautomatic Nüsing EASYmatic® system offers you increased comfort and user-friendliness.

The Vector™ SUBD18 is a direct-radiating, vented subwoofer featuring two high-power, long-excursion 18” (457 mm) transducers. It is designed to provide extended low frequency support for use with CS and CD series Vector Performance Loudspeakers, and is capable of producing articulate and impactful deep bass response for all types of installed music and multimedia applications. The Vector SUBD18 requires use with a Crestron Avia™ DSP to ensure rated performance and reliable operation. It can be driven using either one or two amplifier channels. Its enclosure is optimally tuned to provide maximum low frequency output in a low-profile package designed to fit under low stages and other confined spaces. Vibration isolation feet are provided on the bottom, with aligned recesses on top for stacking of multiple units. Concealed M10 mounting points are included to allow for suspended installation using forged shoulder eyebolts (sold separately).

The Vector™ SUBS15 is a direct-radiating, vented subwoofer featuring a single high-power, long-excursion 15” (381 mm) transducer. It is designed to provide extended low frequency support for use with CS and CD series Vector Performance Loudspeakers, and is capable of producing articulate and impactful deep bass response for all types of installed music and multimedia applications. The Vector SUBS15 requires use with a Crestron Avia™ DSP to ensure rated performance and reliable operation. Its enclosure is optimally tuned to provide maximum low frequency output in a compact package, facilitating placement in tight spaces. Concealed M10 mounting points are included to allow for suspended installation using forged shoulder eyebolts (sold separately).

The Vector™ SUBS18 is a direct-radiating, vented subwoofer featuring a single high-power, long-excursion 18” (457 mm) transducer. It is designed to provide extended low frequency support for use with CS and CD series Vector Performance Loudspeakers, and is capable of producing articulate and impactful deep bass response for all types of installed music and multimedia applications. The Vector SUBS18 requires use with a Crestron Avia™ DSP to ensure rated performance and reliable operation. Its enclosure is optimally tuned to provide maximum low frequency output in a compact package, facilitating placement in tight spaces. Concealed M10 mounting points are included to allow for suspended installation using forged shoulder eyebolts (sold separately).

Range 805 Classic Toilet brush unit - brush handle with replaceable brush head made of black polyamide - brush holder with curved bottom and spherical, semi-open top in ring-shaped bracket - suspended brush - top part can be rotated - container is removable, but can also be fitted to prevent theft - brush head can be replaced due to bayonet fixing - anti-theft protection through concealed screw fixing - 141 mm wide, 470 mm high and 140 mm deep - container made of high-quality polyamide in HEWI colours 90 (jet black), 92 (anthracite grey), 98 (signal white) or 99 (pure white) - holder and brush handle made of high-quality stainless steel, satin surface finish Article no.: HEWI 805.20.100

Suspended decorative luminaire for LED light sources. [LIST] Unique design Synergy of design and technology [/LIST]

Suspended decorative luminaire for LED light sources. [LIST] Unique design Synergy of design and technology [/LIST]

[LIST] Innovative and aesthetically pleasing frameless acoustic islands offering excellent sound absorption. Quick and easy to install, used alone or when a traditional suspended ceiling cannot be installed. Available in square, rectangular or shaped formats with bevelled edges for maximum design freedom, plus in an unlimited number of custom colours using NSC. Perfect for thermal mass installations with rear surface providing excellent heat and light reflection. [/LIST]

[LIST] Innovative and aesthetically pleasing frameless acoustic islands offering excellent sound absorption. Quick and easy to install, used alone or when a traditional suspended ceiling cannot be installed. Available in square, rectangular or shaped formats with bevelled edges for maximum design freedom, plus in an unlimited number of custom colours using NSC. Perfect for thermal mass installations with rear surface providing excellent heat and light reflection. [/LIST]

Besam ASSA ABLOY SL500 Telescopic overhead concealed sets a new standard in telescopic performance by providing superior support and stability. By utilizing an exclusive “door on door” design, the Besam ASSA ABLOY SL500 Telescopic innovative design eliminates inferior suspended track systems by putting all the door weight to the structural portion of the automatic door header via two structural boxes with integrated replaceable aluminum tracks. Disclaimer: This product is available from ASSA ABLOY Entrance Systems - North America. Consult a local representative in your Region to discuss availability.

Besam ASSA ABLOY SL500 Telescopic overhead concealed with transom sets a new standard in telescopic performance by providing superior support and stability. By utilizing an exclusive “door on door” design, the Besam ASSA ABLOY SL500 Telescopic innovative design eliminates inferior suspended track systems by putting all the door weight to the structural portion of the automatic door header via two structural boxes with integrated replaceable aluminum tracks. Disclaimer: This product is available from ASSA ABLOY Entrance Systems - North America. Consult a local representative in your Region to discuss availability.

Besam ASSA ABLOY SL500 Telescopic surface mount sets a new standard in telescopic performance by providing superior support and stability. By utilizing an exclusive “door on door” design, the Besam ASSA ABLOY SL500 Telescopic innovative design eliminates inferior suspended track systems by putting all the door weight to the structural portion of the automatic door header via two structural boxes with integrated replaceable aluminum tracks. Disclaimer: This product is available from ASSA ABLOY Entrance Systems - North America. Consult a local representative in your Region to discuss availability.

The CityView carousel table with 36inch round steel table top provides clustered seating options with suspended seating mounted to the center post.

The CityView carousel table with 36inch square steel table top provides clustered seating options with suspended seating mounted to the center post.

The CityView carousel table with 48inch round steel table top provides clustered seating options with suspended seating mounted to the center post.

The CityView carousel table with 48inch square steel table top provides clustered seating options with suspended seating mounted to the center post.

The JordanCreek 36inch round carousel table provides clustered seating options for any patio setting. Chairs are permanently fixed to tables with support tubes that are suspended from the center post.

The JordanCreek 36inch square carousel table provides clustered seating options for any patio setting. Chairs are permanently fixed to tables with support tubes that are suspended from the center post.

The JordanCreek 48inch round carousel table provides clustered seating options for any patio setting. Chairs are permanently fixed to tables with support tubes that are suspended from the center post.

The JordanCreek 48inch square carousel table provides clustered seating options for any patio setting. Chairs are permanently fixed to tables with support tubes that are suspended from the center post.

AquaBlade® suspended vessel with completely concealed fastenings, complete with a quick-release slim seat. AquaBlade® technology creates a blade of water that cleans a surface that is 90% larger than a vase with a rim. Thanks to its innovative design it also eliminates hidden corners making the entire surface of the vase easily accessible for a more effective cleaning. For wall mounting it is necessary to use the special kit TT0299598 included in the package and the metal support T655067 to be ordered separately. Certified for 4,5 / 3 liter waste.

Suspended single-hole bidet with hidden fixings and water supply from the tap. Both single-lever faucets and single-control single-hole taps can be installed. For wall mounting it is necessary to use the special kit TT0299598 included in the package and the metal support T655067 to be ordered separately. Compatible with the installation dimensions of Esedra Classic.

Suspended bowl lengthened without flange - 70 x 36 cm Weight: 32 kg

Suspended bowl lengthened without flange - 70 x 36 cm Weight: 24.6 kg

<p>*Available only in France"<br></p> <p>Self-contained emergency luminaire with LED technology, with cylindrical body made of synthetic material and opal or transparent polycarbonate diffuser. Suitable for flush mounting on suspended ceiling.</p>

<p>*Available only in France*</p><p>Self-contained emergency luminaire with LED technology, with cylindrical body and polycarbonate diffuser. Suitable for flush mounting on suspended ceiling. Flush-mounted square. IP20 IK04</p>

<p>*Available only in France"<br></p><p>Self-contained emergency luminaire with LED technology, with cylindrical body made of synthetic material and opal or transparent polycarbonate diffuser. Suitable for semi-recessed mounting on suspended ceiling.</p>

<p>*Available only in France*</p><p>Self-contained emergency luminaire with LED technology, with cylindrical body made of synthetic material and opal or transparent polycarbonate diffuser. Suitable for semi-recessed mounting on suspended or solid (KSP-Lens) ceiling.</p>

<p>*Available only in France*</p><p>Self-contained emergency luminaire with LED technology, with cylindrical body made of synthetic material and opal or transparent polycarbonate diffuser. Suitable for flush mounting on suspended ceiling.<br>Includes metallic trim.</p>

<p>*Available only in France*</p><p>Self-contained emergency luminaire with LED technology, with cylindrical body and polycarbonate diffuser. Suitable for flush mounting on suspended ceiling.<br>Round trimless flush-mounted.</p>

<p>*Available only in France*</p> <p>Self-contained emergency luminaire with LED technology, with cylindrical body made of synthetic material and opal or transparent polycarbonate diffuser. Suitable for semi-recessed mounting on suspended ceiling.</p>

<p>Self-contained emergency luminaire with LED technology, with cylindrical body made of synthetic material and opal or transparent polycarbonate diffuser. Suitable for flush mounting on suspended ceiling.</p><p>Models:</p> <p>Non maintained: LENS N20 , LENS N30 , LENS N40 , LENS N70 , LENS 2N20 , LENS 2N30 , LENS 2N40 , LENS 2N70 , LENS 3N20 , LENS 3N30 , LENS 3N40 , LENS 3N70 </p> <p>Maintained: LENS P20 , LENS P30 , LENS P40 , LENS P70 , LENS 2P20 , LENS 2P30 , LENS 2P40 , LENS 2P70 , LENS 3P20 , LENS 3P30 , LENS 3P40 , LENS 3P70 </p> <p>Non maintained A/TCA: LENS N20 A/TCA , LENS N30 A/TCA , LENS N40 A/TCA , LENS N70 A/TCA , LENS 2N20 A/TCA , LENS 2N30 A/TCA , LENS 2N40 A/TCA , LENS 2N70 A/TCA , LENS 3N20 A/TCA , LENS 3N30 A/TCA , LENS 3N40 A/TCA , LENS 3N70 A/TCA </p> <p>Maintained A/TCA: LENS P20 A/TCA , LENS P30 A/TCA , LENS P40 A/TCA , LENS P70 A/TCA , LENS 2P20 A/TCA , LENS 2P30 A/TCA , LENS 2P40 A/TCA , LENS 2P70 A/TCA , LENS 3P20 A/TCA , LENS 3P30 A/TCA , LENS 3P40 A/TCA , LENS 3P70 A/TCA.</p>

<p>Self-contained emergency luminaire with LED technology, with cylindrical body and polycarbonate diffuser. Suitable for flush mounting on suspended ceiling. Flush-mounted square. IP20 IK04</p><p>Models:<br></p><p>Non maintained:  LENS N20 (CD) LENS N30 (CD) LENS N40 (CD) LENS N70 (CD) LENS 2N20 (CD) LENS 2N30 (CD) LENS 2N40 (CD) LENS 2N70 (CD) LENS 3N20 (CD) LENS 3N30 (CD) LENS 3N40 (CD) LENS 3N70 (CD)</p> <p>Maintained:  LENS P20 (CD) LENS P30 (CD) LENS P40 (CD) LENS P70 (CD) LENS 2P20 (CD) LENS 2P30 (CD) LENS 2P40 (CD) LENS 2P70 (CD) LENS 3P20 (CD) LENS 3P30 (CD) LENS 3P40 (CD) LENS 3P70 (CD)</p> <p>Non maintained A/TCA:  LENS N20 A/TCA (CD) LENS N30 A/TCA (CD) LENS N40 A/TCA (CD) LENS N70 A/TCA (CD) LENS 2N20 A/TCA (CD) LENS 2N30 A/TCA (CD) LENS 2N40 A/TCA (CD) LENS 2N70 A/TCA (CD) LENS 3N20 A/TCA (CD) LENS 3N30 A/TCA (CD) LENS 3N40 A/TCA (CD) LENS 3N70 A/TCA (CD)</p> <p>Maintained A/TCA:  LENS P20 A/TCA (CD) LENS P30 A/TCA (CD) LENS P40 A/TCA (CD) LENS P70 A/TCA (CD) LENS 2P20 A/TCA (CD) LENS 2P30 A/TCA (CD) LENS 2P40 A/TCA (CD) LENS 2P70 A/TCA (CD) LENS 3P20 A/TCA (CD) LENS 3P30 A/TCA (CD) LENS 3P40 A/TCA (CD) LENS 3P70 A/TCA (CD)</p>

<p>Self-contained emergency luminaire with LED technology, with cylindrical body made of synthetic material and opal or transparent polycarbonate diffuser. Suitable for semi-recessed mounting on suspended ceiling.</p><p>Models:</p> <p>Non maintained: LENS N20 (CDSM), LENS N30 (CDSM), LENS N40 (CDSM), LENS N70 (CDSM), LENS 2N20 (CDSM), LENS 2N30 (CDSM), LENS 2N40 (CDSM), LENS 2N70 (CDSM), LENS 3N20 (CDSM), LENS 3N30 (CDSM), LENS 3N40 (CDSM), LENS 3N70 (CDSM)</p> <p>Maintained: LENS P20 (CDSM), LENS P30 (CDSM), LENS P40 (CDSM), LENS P70 (CDSM), LENS 2P20 (CDSM), LENS 2P30 (CDSM), LENS 2P40 (CDSM), LENS 2P70 (CDSM), LENS 3P20 (CDSM), LENS 3P30 (CDSM), LENS 3P40 (CDSM), LENS 3P70 (CDSM)</p> <p>Non maintained A/TCA: LENS N20 A/TCA (CDSM), LENS N30 A/TCA (CDSM), LENS N40 A/TCA (CDSM), LENS N70 A/TCA (CDSM), LENS 2N20 A/TCA (CDSM), LENS 2N30 A/TCA (CDSM), LENS 2N40 A/TCA (CDSM), LENS 2N70 A/TCA (CDSM), LENS 3N20 A/TCA (CDSM), LENS 3N30 A/TCA (CDSM), LENS 3N40 A/TCA (CDSM), LENS 3N70 A/TCA (CDSM)</p> <p>Maintained A/TCA: LENS P20 A/TCA (CDSM), LENS P30 A/TCA (CDSM), LENS P40 A/TCA (CDSM), LENS P70 A/TCA (CDSM), LENS 2P20 A/TCA (CDSM), LENS 2P30 A/TCA (CDSM), LENS 2P40 A/TCA (CDSM), LENS 2P70 A/TCA (CDSM), LENS 3P20 A/TCA (CDSM), LENS 3P30 A/TCA (CDSM), LENS 3P40 A/TCA (CDSM), LENS 3P70 A/TCA (CDSM)<span></span></p>

<p>Self-contained emergency luminaire with LED technology, with cylindrical body made of synthetic material and opal or transparent polycarbonate diffuser. Suitable for semi-recessed mounting on suspended or solid (KSP Lens) ceiling. <b>IP66 IK04</b></p><p>Models:</p> <p>Non maintained: LENS N20 (ESM), LENS N30 (ESM), LENS N40 (ESM), LENS N70 (ESM), LENS 2N20 (ESM), LENS 2N30 (ESM), LENS 2N40 (ESM), LENS 2N70 (ESM), LENS 3N20 (ESM), LENS 3N30 (ESM), LENS 3N40 (ESM), LENS 3N70 (ESM)</p> <p>Maintained: LENS P20 (ESM), LENS P30 (ESM), LENS P40 (ESM), LENS P70 (ESM), LENS 2P20 (ESM), LENS 2P30 (ESM), LENS 2P40 (ESM), LENS 2P70 (ESM), LENS 3P20 (ESM), LENS 3P30 (ESM), LENS 3P40 (ESM), LENS 3P70 (ESM)</p> <p>Non maintained A/TCA: LENS N20 A/TCA (ESM), LENS N30 A/TCA (ESM), LENS N40 A/TCA (ESM), LENS N70 A/TCA (ESM), LENS 2N20 A/TCA (ESM), LENS 2N30 A/TCA (ESM), LENS 2N40 A/TCA (ESM), LENS 2N70 A/TCA (ESM), LENS 3N20 A/TCA (ESM), LENS 3N30 A/TCA (ESM), LENS 3N40 A/TCA (ESM), LENS 3N70 A/TCA (ESM)</p> <p>Maintained A/TCA: LENS P20 A/TCA (ESM), LENS P30 A/TCA (ESM), LENS P40 A/TCA (ESM), LENS P70 A/TCA (ESM), LENS 2P20 A/TCA (ESM), LENS 2P30 A/TCA (ESM), LENS 2P40 A/TCA (ESM), LENS 2P70 A/TCA (ESM), LENS 3P20 A/TCA (ESM), LENS 3P30 A/TCA (ESM), LENS 3P40 A/TCA (ESM), LENS 3P70 A/TCA (ESM)</p>

<p>Self-contained emergency luminaire with LED technology, with cylindrical body made of synthetic material and opal or transparent polycarbonate diffuser. Suitable for flush mounting on suspended ceiling.<br>Includes metallic trim.</p><p>Models:</p> <p>Non maintained: LENS N20 (MET), LENS N30 (MET), LENS N40 (MET), LENS N70 (MET), LENS 2N20 (MET), LENS 2N30 (MET), LENS 2N40 (MET), LENS 2N70 (MET), LENS 3N20 (MET), LENS 3N30 (MET), LENS 3N40 (MET), LENS 3N70 (MET)</p> <p>Maintained: LENS P20 (MET), LENS P30 (MET), LENS P40 (MET), LENS P70 (MET), LENS 2P20 (MET), LENS 2P30 (MET), LENS 2P40 (MET), LENS 2P70 (MET), LENS 3P20 (MET), LENS 3P30 (MET), LENS 3P40 (MET), LENS 3P70 (MET)</p> <p>Non maintained A/TCA: LENS N20 A/TCA (MET), LENS N30 A/TCA (MET), LENS N40 A/TCA (MET), LENS N70 A/TCA (MET), LENS 2N20 A/TCA (MET), LENS 2N30 A/TCA (MET), LENS 2N40 A/TCA (MET), LENS 2N70 A/TCA (MET), LENS 3N20 A/TCA (MET), LENS 3N30 A/TCA (MET), LENS 3N40 A/TCA (MET), LENS 3N70 A/TCA (MET)</p> <p>Maintained A/TCA: LENS<br>P20 A/TCA (MET), LENS P30 A/TCA (MET), LENS P40 A/TCA (MET), LENS P70 A/TCA (MET), LENS 2P20 A/TCA (MET), LENS 2P30 A/TCA (MET), LENS 2P40 A/TCA (MET), LENS 2P70 A/TCA (MET), LENS 3P20 A/TCA (MET), LENS 3P30 A/TCA (MET), LENS 3P40 A/TCA (MET), LENS 3P70 A/TCA (MET)</p><p><br></p>

<p>Self-contained emergency luminaire with LED technology, with cylindrical body and polycarbonate diffuser. Suitable for flush mounting on suspended ceiling.<br>Flush-mounted without trim.</p><p>Models:</p> <p>Non maintained: LENS N20 (SEN), LENS N30 (SEN), LENS N40 (SEN), LENS N70 (SEN), LENS 2N20 (SEN), LENS 2N30 (SEN), LENS 2N40 (SEN), LENS 2N70 (SEN), LENS 3N20 (SEN), LENS 3N30 (SEN), LENS 3N40 (SEN), LENS 3N70 (SEN)</p> <p>Maintained: LENS P20 (SEN), LENS P30 (SEN), LENS P40 (SEN), LENS P70 (SEN), LENS 2P20 (SEN), LENS 2P30 (SEN), LENS 2P40 (SEN), LENS 2P70 (SEN), LENS 3P20 (SEN), LENS 3P30 (SEN), LENS 3P40 (SEN), LENS 3P70 (SEN)</p> <p>Non maintained A/TCA: LENS N20 A/TCA (SEN), LENS N30 A/TCA (SEN), LENS N40 A/TCA (SEN), LENS N70 A/TCA (SEN), LENS 2N20 A/TCA (SEN), LENS 2N30 A/TCA (SEN), LENS 2N40 A/TCA (SEN), LENS 2N70 A/TCA (SEN), LENS 3N20 A/TCA (SEN), LENS 3N30 A/TCA (SEN), LENS 3N40 A/TCA (SEN), LENS 3N70 A/TCA (SEN)</p> <p>Maintained A/TCA: LENS P20 A/TCA (SEN), LENS P30 A/TCA (SEN), LENS P40 A/TCA (SEN), LENS P70 A/TCA (SEN), LENS 2P20 A/TCA (SEN), LENS 2P30 A/TCA (SEN), LENS 2P40 A/TCA (SEN), LENS 2P70 A/TCA (SEN), LENS 3P20 A/TCA (SEN), LENS 3P30 A/TCA (SEN), LENS 3P40 A/TCA (SEN), LENS 3P70 A/TCA (SEN)</p>

<p>Self-contained emergency luminaire with LED technology, with cylindrical body made of synthetic material and opal or transparent polycarbonate diffuser. Suitable for semi-recessed mounting on suspended ceiling.</p><p>Models:</p> <p>Non maintained: LENS N20 (SM), LENS N30 (SM), LENS N40 (SM), LENS N70 (SM), LENS 2N20 (SM), LENS 2N30 (SM), LENS 2N40 (SM), LENS 2N70 (SM), LENS 3N20 (SM), LENS 3N30 (SM), LENS 3N40 (SM), LENS 3N70 (SM)</p> <p>Maintained: LENS P20 (SM), LENS P30 (SM), LENS P40 (SM), LENS P70 (SM), LENS 2P20 (SM), LENS 2P30 (SM), LENS 2P40 (SM), LENS 2P70 (SM), LENS 3P20 (SM), LENS 3P30 (SM), LENS 3P40 (SM), LENS 3P70 (SM)</p> <p>Non maintained A/TCA: LENS N20 A/TCA (SM), LENS N30 A/TCA (SM), LENS N40 A/TCA (SM), LENS N70 A/TCA (SM), LENS 2N20 A/TCA (SM), LENS 2N30 A/TCA (SM), LENS 2N40 A/TCA (SM), LENS 2N70 A/TCA (SM), LENS 3N20 A/TCA (SM), LENS 3N30 A/TCA (SM), LENS 3N40 A/TCA (SM), LENS 3N70 A/TCA (SM)</p> Maintained A/TCA: LENS<br><p>P20 A/TCA (SM), LENS P30 A/TCA (SM), LENS P40 A/TCA (SM), LENS P70 A/TCA (SM), LENS 2P20 A/TCA (SM), LENS 2P30 A/TCA (SM), LENS 2P40 A/TCA (SM), LENS 2P70 A/TCA (SM), LENS 3P20 A/TCA (SM), LENS 3P30 A/TCA (SM), LENS 3P40 A/TCA (SM),</p><p>LENS 3P70 A/TCA (SM)</p>

<p>Luminaire with LED technology, with cylindrical body made of synthetic material and opal or transparent polycarbonate diffuser. Suitable for flush mounting on suspended ceiling. Supports AC and DC voltage. Suitable for centralised AC/DC power systems. Luminous flux in emergency suitable for centralised AC/DC power systems.</p><p>Models: Lens L20, Lens L30, Lens L40, Lens L70</p>

<p>Luminaire with LED technology, with cylindrical body and polycarbonate diffuser. Suitable for flush mounting on suspended ceiling. Flush-mounted square. IP20 IK04. Supports AC and DC voltage. Suitable for centralised AC/DC power systems. Luminous flux in emergency suitable for centralised AC/DC power systems.</p><p>Models: Lens L20 (CD), Lens L30 (CD), Lens L40 (CD), Lens L70 (CD)</p><p><br></p>

<p>Luminaire with LED technology, with cylindrical body made of synthetic material and opal or transparent polycarbonate diffuser. Suitable for semi-recessed mounting on suspended ceiling. Supports AC and DC voltage. Suitable for centralised AC/DC power systems. Luminous flux in emergency suitable for centralised AC/DC power systems.</p><p>Models: Lens L20 (CDSM), Lens L30 (CDSM), Lens L40 (CDSM), Lens L70 (CDSM)<br></p>

<p>Luminaire with LED technology, with cylindrical body made of synthetic material and opal or transparent polycarbonate diffuser. Supports AC and DC voltage. Suitable for centralised AC/DC power systems. Luminous flux in emergency suitable for centralised AC/DC power systems. Suitable for semi-recessed mounting on suspended or solid (KSP Lens) ceiling.<br><strong>Watertight semi-recessed. IP66 IK04.</strong></p><p>Models: Lens L20 (ESM), Lens L30 (ESM), Lens L40 (ESM), Lens L70 (ESM)</p>

<p>Luminaire with LED technology, with cylindrical body made of synthetic material and opal or transparent polycarbonate diffuser. Suitable for flush mounting on suspended ceiling. Supports AC and DC voltage. Suitable for centralised AC/DC power systems. Luminous flux in emergency suitable for centralised AC/DC power systems.<br>Includes metallic trim.</p><p>Models: Lens L20 (MET), Lens L30 (MET), Lens L40 (MET), Lens L70 (MET)</p>

<p>Luminaire with LED technology, with cylindrical body and polycarbonate diffuser. Supports AC and DC voltage. Suitable for centralised AC/DC power systems. Luminous flux in emergency suitable for centralised AC/DC power systems.  Suitable for flush mounting on suspended ceiling.<br>Round trimless flush-mounted.</p><p>Models: Lens L20 (SEN), Lens L30 (SEN), Lens L40 (SEN), Lens L70 (SEN)<br></p>

<p>Luminaire with LED technology, with cylindrical body made of synthetic material and opal or transparent polycarbonate diffuser. Suitable for semi-recessed mounting on suspended ceiling. Supports AC and DC voltage. Suitable for centralised AC/DC power systems. Luminous flux in emergency suitable for centralised AC/DC power systems.</p> <p>Models: Lens L20 (SM), Lens L30 (SM), Lens L40 (SM), Lens L70 (SM)<br></p>

<p>*Available only in France*</p> <p>Luminaire with LED technology, with cylindrical body made of synthetic material and opal or transparent polycarbonate diffuser. Suitable for flush mounting on suspended ceiling. Supports AC and DC voltage. Suitable for centralised AC/DC power systems. Luminous flux in emergency suitable for centralised AC/DC power systems.</p>

<p>*Available only in France*</p><p>Luminaire with LED technology, with cylindrical body and polycarbonate diffuser. Supports AC and DC voltage. Suitable for centralised AC/DC power systems. Luminous flux in emergency suitable for centralised AC/DC power systems. <span></span>Suitable for flush mounting on suspended ceiling. Flush-mounted square. IP20 IK04.<br></p>

<p>*Available only in France"<br></p><p>Luminaire with LED technology, with cylindrical body made of synthetic material and opal or transparent polycarbonate diffuser. Supports AC and DC voltage. Suitable for centralised AC/DC power systems. Luminous flux in emergency suitable for centralised AC/DC power systems. Suitable for semi-recessed mounting on suspended ceiling.</p>

<p>*Available only in France*</p> <p>Luminaire with LED technology, with cylindrical body made of synthetic material and opal or transparent polycarbonate diffuser. Supports AC and DC voltage. Suitable for centralised AC/DC power systems. Luminous flux in emergency suitable for centralised AC/DC power systems. Suitable for semi-recessed mounting on suspended or solid (KSP Lens) ceiling. Watertight semi-recessed. IP66 IK04.<span></span></p><p><br></p>

<p>*Available only in France"</p> <p>Luminaire with LED technology, with cylindrical body made of synthetic material and opal or transparent polycarbonate diffuser. Suitable for flush mounting on suspended ceiling. Supports AC and DC voltage. Suitable for centralised AC/DC power systems. Luminous flux in emergency suitable for centralised AC/DC power systems.<br>Includes metallic trim.</p><p>Models: Lens LF3, Lens LF3L1, Lens LF3L2, Lens LF8, Lens LF8L1, Lens LF8L2.</p>

<p>*Available only in France*</p><p>Luminaire with LED technology, with cylindrical body and polycarbonate diffuser. Supports AC and DC voltage. Suitable for centralised AC/DC power systems. Luminous flux in emergency suitable for centralised AC/DC power systems.  Suitable for flush mounting on suspended ceiling. Round trimless flush-mounted.</p>

<p>*Available only in France*</p><p>Luminaire with LED technology, with cylindrical body made of synthetic material and opal or transparent polycarbonate diffuser. Supports AC and DC voltage. Suitable for centralised AC/DC power systems. Luminous flux in emergency suitable for centralised AC/DC power systems. Suitable for semi-recessed mounting on suspended ceiling.</p>

kreon nuit is an elementary designed beam that can be used as a massive line to bring graphical elements into architecture. The advanced LED system with slim TIR (Total Internal Reflector) lenses requires a slim gap of just  10mm to unfold a variety of beam angles. Its basic form draws minimal attention and can easily be used in combination with other kreon tools of light, creating an artistic yet responsible use of light sources in a recessed, surface mounted or suspended installation, making it a highly versatile and performing linear lighting system

<p>Pelée Downlight is characterized by the inner conical circles, ensuring a comfortable, non-glaring spread of light.</p><p>The inner conical circles of the Pelée downlighters contribute to a comfortable, non-glaring spread of light. The family comprises luminaires to be recessed, surface-mounted, or suspended. <br><br>The many variants make the family flexible and easy to use. <br></p>

Decorative downlight luminaire for suspended ceilings, for LED light sources. Perfect combination of aesthetics and ergonomics Universal design Fast and easy mounting Maintenance-free operation