Multi-story elevator shaft with elevator car.

3D parametric, scenery / tiles in the wall, Spanish

ArchiGRID 1.0 By Paulo H. Santos, arq.º mail:phsantos.arq@clix.pt DEC 2007 S.J. da Madeira/Portugal2D parametric, structural grid

2D / 3D parametric plastic double door, Plastmo2D / 3D parametric plastic double door, Plastmo

2D parametric, twinlite wall2D parametric, twinlite wall

You can change the article nr: with the parameters. unfortunally the preview picture won't change. You will only see the changes when you render a picture.3D parametric, endmoldi with optional\n- article number\n- corner of list\n- left / right

ArchiGRID By Paulo H. Santos, arq.º mail:phsantos.arq@sapo.pt December 2005 Made in Portugal2D parametric, structural grid, Portugal version

Multi-story elevator shaft with elevator car.

Pryda SBK15 structural post bracket

Bowmac B108 structural beam bracket

Bowmac B109 structural beam bracket

Bowmac B12 structural post bracket

Bowmac structural beam bracket

Bowmac B134 structural post bracket

Reduced profile elevations leading to maximum transparency: With its integrated pressure profile WICTEC 50 offers an inexpensive solution with a design similar to structural glazing. The glazing technology with a flush or low pressure profile the assembly is as fast and easy as for a classic stick system curtain wall. System test results / CE product pass in accordance with DIN EN 13830 Air permeability: Class AE Watertightness: RE 1200 Resistance to wind load: 2000 / –3200 Pa, security 3000 / –4800 Pa Impact resistance: Class E5 / I5 Burglar resistance: RC1N Quality assurance: Certified according to ISO 9001:2008 Environmental management: Certified according to ISO 14001

High thermo-acoustic performance structural floor or roof with Jendy JOSS® system with metal frames, upper covering OSB panels and insulation in rock wool, for a total thickness of 237mm. The structure consists of a frame of galvanized steel, 1.5 mm thick section 50-200-50mm places to 400mm wheelbase; thickness, pitch and height of the profiles as resulting from specific structural calculations. The profiles are secured with vertical warping brackets or inserted within the 40-200-40mm section guides. The top surface of the floor will be covered with a double layer of OSB 3 sheets, normate for static functions and the bracing of the horizontal plane, 12mm thick, screwed to the metal with screws VT4.2*32 galvanized and drilling, crossed and with staggered joints cutlery. The floor lower side will instead be coated with a plasterboard plate of 13mm thickness and 2800-3000x1200mm size screwed to the steel structure with suitable self-threading screws fosfate VT3.5*25. The plasterboard will be finished as a rule with plastering of gypsum-based joint with interposed retina or microperforated tape, plastering of the head of the screws, angles, etc ... In the gap will be inserted one of high density rock wool of 160mm thick 70 kg/m³ with acoustic insulation function. In case of roof will be placed on the upper side a further insulating layer to achieve the desired thermal values ​​and suitable waterproofing of the surface; if it’s an intermediate floor it must be realized the screed plant, possibly dry, with traditional subflooring pad and subsequent paving as usual. Including static design of the floor, exclude the reviewing of the existing part. Vacuum computation for full under 5mq.

FEATURES high bearing capacity and rigidity of profiles light and suitable for quick assembly purlin-free roof constructions large span bearing constructions economical solutions for medium and large surfaces stay in place formwork for reinforced concrete constructions APPLICATION - industrial and services facilities - agricultural facilities - new and renovated facilities - carports, garages - logistics centres

MasterEmaco S 420 is a rapid setting polymer modified repair mortar for application where high compressive strengths are required. The material cures to a concrete grey colour.

MasterEmaco S 5300 is a single component, lightweight, polymer modified, high build structural repair mortar that meets the requirements of the new European Norm EN 1504 part 3 class R3. MasterEmaco S 5300 is a ready-to-use material that contains sulphate resistant Portland cement (HSR LA), hydraulic binders, well graded sands, specially selected polymer fibres (polyacrylonitryl) and additives. Applied nanotechnology has been used to significantly reduce shrinkage. When mixed with water, it forms a highly thixotropic mortar that can easily be hand, trowel or spray applied in thicknesses up to 75 mm in one layer. It is particularly suited to vertical and overhead work where hand-profiling is required.

MasterEmaco S 5400 is a single component, extra high strength, high modulus, shrinkage compensated structural repair mortar that meets the requirements of the new European Norm EN 1504 part 3 class R4. MasterEmaco S 5400 is a ready-to-use material that contains Portland cement, hydraulic binders, well graded sands, specially selected polymer fibres (PAN – polyacrylonitryl) and special additives to significantly reduce the risk and incidence of shrinkage cracking. When mixed with water, MasterEmaco S 5400 forms a highly thixotropic mortar that can easily be spray or trowel applied.

A truss and continuous beam,with point loads acting on nodes, solver based on stiffness matrix method. Results compared with LinPro.

[LIST] The Schüco standard façade systems FW 50+ and FW 60+ are tried and tested solutions,which have proven themselves time and again Transom and mullion profiles are available in graduated dimensions to meet varying structural requirements FW 50+.SI (FW 60+.SI) certified by Passivhaus Institut Darmstadt, Germany Identical inner gasket sight lines on transoms and mullions Three drainage levels: the FW 50+ and FW 60+ systems are designed in such a way that the glass rebates of the mullions and transoms lie in different planes System-based security to WK2 (RC 2) / WK3 (RC 3) / FB4 The insert units offer new design options and efficient ventilation for large opening sections. Windows from the AWS series and Doors from the ADS series are compatible with façade systems Projected top-hung and parallel-opening window for vent weights up to a maximum of 250 kg Particularly large insert unit dimensions up to maximum 2700 mm wide and 3600 mm high [/LIST]

The NORTEC raised floor system offers impressive in-built properties and truly state-of-the-art technology. It is the ideal product for almost any field of application. NORTEC floor panels give superb underfoot comfort. They are manufactured from calcium sulphate (gypsum): a non-combustible material with superlative structural and physical properties. This product also offers outstanding levels of soundproofing. As a manufacturer, we can determine the choice of raw materials used. The Institute of Building Biology in Rosenheim recommends NORTEC as a biologically-neutral building material. Our gypsum panels are virtually emission-free.

CI System Continuous Rooflight B - Energy-efficient and superior statics The first continuous rooflight with complete thermal separation with approval for use in Germany and throughout Europe – for an optimised energy balance. With the CI System Continuous Rooflight B, we have developed a daylight system for intelligent building management that breaks new ground in terms of energy efficiency and structural design. In doing so, we have closely focused on intelligence – on well-engineered individual components in a completely heat-insulated, very economical and sturdy overall system. We call it TIP: Total Insulated Product. [LIST] Numerous glazing types Dimensions: length: endless width: 0.84 m to 6.00 m (inside dimension of frame) Ug values of 3.1 to 1.2 W/m²K Available Smoke and heat ventilation units (tested to EN 12101-2) European Technical Approval -ETA and German General Technical Approvals (ABZ) Enviromental product declararation acc. to EN 15804 [/LIST]

For applications requiring a ceiling which is mechanically secured to the structural soffit. Ecophon Focus F is installed directly to an existing plaster ceiling, boarding, battens or concrete, creating a ceiling with a smooth appearance. The bevelled edges create a narrow groove between each tile. The tiles are not demountable. The tiles are manufactured from high density, 3rd generation glass wool. The visible surface has an Akutex™ FT coating and the back of the tile is covered with glass tissue. The edges are reinforced and painted. The weight is approximately 2,5 kg/m². Ecophon recommend Connect screws for a quick and secure installation.

A 1-1/4" diameter, satin finish stainless steel, peened gripping surface, 2 wall toilet stall/ room, grab bar with concealed mounting flanges. Snap over flanges are provided to conceal mounting screws. A selection of mounting kits and concealed anchor devices are available from the manufacturers for different types of installations. Grab bar shall comply with barrier-free accessibility guidelines for structural strength. For typical water closet applications in toilet stalls and rooms where ADA (American's With Disabilities Act) requirements must be met.

A 1-1/4" diameter, satin finish stainless steel, peened gripping surface, 2 wall shower, grab bar with concealed mounting flanges. Snap over flanges are provided to conceal mounting screws. A selection of mounting kits and concealed anchor devices are available from the manufacturers for different types of installations. Grab bar shall comply with barrier-free accessibility guidelines for structural strength. For typical applications in shower stalls where ADA (American's With Disabilities Act) requirements must be met.

A surface mounted, satin finish stainless steel, 1" diameter, towel bar with concealed mounting flanges. Clearance between towel bar and wall shall be 1-1/2". Ends of towel bar pass through the flanges and are welded to form one structural unit. A selection of mounting kits and concealed anchor devices are available from the manufacturers for different types of installations. Available in various widths. Recommended for use in shower or bathtub rooms on psychiatric and/or detention wards. Pricing based upon a suggested standard width of 18".

With 75 mm profile depth, WICLINE 75 evo features the highest thermal insulation properties and structural characteristics. With its superior technical performance this aluminium window is attuned to all architectural requirements of the future. In Switzerland WICLINE 75 evo has been the first metal window to be certified as Minergie-P module window. System test results / CE product pass in accordance with DIN EN 14351-1:2006+A1:2010 Air permeability: Class 4 Watertightness: E900 Resistance to wind load: Class C5 / B5 Acoustic performance: Rw (C;Ctr ) = 47 (–1; –4) dB Operating forces: Class 1 Load bearing capacity of safety devices: Fulfiled Mechanical strength: Class 4 Repeated opening / closing: Class 3 (20,000 cycles) Corrosion resistance of the fittings: Class 5 Burglar resistance: RC1N, RC2N, RC2, RC3 Bullet resistance: FB4 S, FB4 NS (depending on the profile combination) Quality assurance: Certified according to ISO 9001:2008 Environmental management: Certified according to ISO 14001

As an attractive complement for curtain walls the integration sash WICLINE 90SG provides efficient ventilation, if requested also fully automated. This all-glass window gives full options as a projecting top-hung sash or as a parallel outward opening sash and can be integrated flush with the glass pane level in WICTEC 50SG structural glazing curtain walling or in stick systems with exterior pressure profiles. For an optimum thermal insulation WICLINE 90SG can be equipped with double or triple glazing. Using standard glass without glass step leads to an economy of cost and improved safety. System test results / CE product pass in accordance with DIN EN 14351-1:2006+A1:2010 Air permeability: Class 4 Watertightness: E750 Resistance to wind load: Class C4 / B4 Repeated opening / closing: Class 2 (10,000 cycles) Impact resistance: Class 3 Load bearing capacity of safety devices: Fulfilled Approval ETA: -11/0042 (European Technical Approval) Quality assurance: Certified according ISO 9001:2008 Environmental management: Certified according to ISO 14001

Aliva offers Glass solution of varying types including laminated glass panels with mechanical undercut anchors which can be painted and screen printed to suit requirements along with structural bonded glass panels.

Poujoulat has identified a strategic priority focus, which is the integration of design as a vector for renewal, diversification and increased value. The LUMINANCE range offers a large number of choices. This range has been designed whilst taking high environmental quality and sustainable development into consideration. It provides excellent draught and optimises heating appliance efficiency. Luminance relies on the same technical basis as the other Poujoulat chimney stacks, and therefore guarantees quality, performance and quick and easy installation. Installation can be carried out by one or two persons, without roof-frame reinforcement or structural work. The components are supplied on-site "ready to install", depending on the house's characteristics.

The Tradinov chimney stack is our traditional solution for the new-build market. Light and economical, this chimney stack has already been installed on many dwellings. Supplied with an insulated chimney, it secures a good smoke exhaust. A true industrial custom-built solution, the flashing is made to measure and to suit the roofing material for an immediate and perfect water-tightness and guarantees immediate complete sealing, whatever the pitch of the roof or the roofing material. This chimney stack can be adjusted (up to 10%) on site to the roof pitch for a perfect verticality. The Tradinov chimney stack is installed without structural work and without roof-frame reinforcement. It is intended for use in new-build dwellings and is perfectly in conformity with the new regulations. It is available in numerous finishes (smooth paint, roughcast or bricks) and can be fitted with different types of cap. The quality of Poujoulat products is recognized and recommended by the largest European heating appliance manufacturers.

The Cup table was designed by the trio Knudsen, Berg and Hindenes. This sofa table is a visually lightweight table that fits into most settings. With two heights, two colors and two bases, one can freely play around with different expressions. The table top is made of environmentally sound absorbing structural foam that provides a soft satin finish. Dimensions: Low H: 39 cm Ø: 54,5 cm High H: 43 cm Ø: 54,5 cm

Angle table is a composition of 3 pieces: base, support frame and top. Base is a set of two 15 mm TPB symmetric modules. The support frame is the union between the bases and it is built in 4 mm powder coated structural steel tube. The top is a 10 mm TPB unique piece.

Nipo is a solid wood chair whose form is reminiscent of the stark simplicity of Finnish rustic furniture. Excellent sitting comfort is achieved by gently inclining seat and backrest. The solid wood seat and frame are slightly apart which allows wood to stretch and contract. Every part of the chair’s structure is carefully designed with efficient material utilisation and industrial production in mind. Skilfully manufactured in Finland, the traditional wood joints and structural details enrich the meticulously finished effect. The restrained design makes the chair suitable for church halls and higher end cafés, for instance.

Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.

Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.

Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.

Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.

Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.

Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.

Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.

Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.

Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.

Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.

Plasterboards can be used to the construction of interior and exterior walls. They are of particular use in the repair of all types of buildings. The surface of the drywall is smooth and forms a perfect base for further finishing works. Plasterboards can be fixed to the wall with plasterboard adhesive or directly on the steel framework using steel partitions. By using plasterboard it is possible to increase the protection for fire resistance of the load-bearing walls of the building up to EI120 class. Building such constructions with an additional layer of mineral wool increases the acoustic and thermal insulation of the external walls. The interior walls are used to separate the individual rooms in the building and, depending on their functions, they meet stringent requirements in terms of statics, acoustics and fire protection. Partition walls are mostly made of drywall systems of profiles with different width dimensions: 50, 75 or 100 mm with a single or double layer of plasterboard or cement board. The materials used to make partition walls have important properties, such as acoustic insulation, fire insulation and moisture resistance; they also must be easy to install and remove to ensure the highest comfort of the room. Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation. A casing systems of risers is used to hide all kinds of installations in a building. Due to the possibility of smoke or fire spreading to other levels of the building, the risers must be adequately protected. For this purpose, systems based on 12.5 mm, 15 mm, 20 mm or 25 mm plasterboards are used. The plasterboards are fixed to the intermediate support structure or directly to the walls and ceiling. The casing systems of risers using plasterboards help protect against the spread of fire to the EI 120 fire resistance class. An additional feature of these systems is possible acoustic protection from sounds coming from inside the shaft, caused for example by air flow, sanitation system or vibration of the installation.

System for energy efficient windows, doors and screens Sustainable, ecological, 100 % steel Forster unico is the revolutionary, thermally insulated profile system for single and double-leaf doors, for windows as well as for exterior glazed units. The basic profiles comprise 100% recyclable steel and contain no synthetic insulating materials – in contrast to all other insulated systems. This innovation, uniquely evocative of a framework style of construction, satisfies the most stringent demands relating to physical and structural functions. This is the latest technology, energy efficiency, attractive design and the ecological use of materials for a responsible and sustainable construction.

System for energy efficient windows, doors and screens Sustainable, ecological, 100 % steel Forster unico is the revolutionary, thermally insulated profile system for single and double-leaf doors, for windows as well as for exterior glazed units. The basic profiles comprise 100% recyclable steel and contain no synthetic insulating materials – in contrast to all other insulated systems. This innovation, uniquely evocative of a framework style of construction, satisfies the most stringent demands relating to physical and structural functions. This is the latest technology, energy efficiency, attractive design and the ecological use of materials for a responsible and sustainable construction.

System for energy efficient windows, doors and screens Sustainable, ecological, 100 % steel Forster unico is the revolutionary, thermally insulated profile system for single and double-leaf doors, for windows as well as for exterior glazed units. The basic profiles comprise 100% recyclable steel and contain no synthetic insulating materials – in contrast to all other insulated systems. This innovation, uniquely evocative of a framework style of construction, satisfies the most stringent demands relating to physical and structural functions. This is the latest technology, energy efficiency, attractive design and the ecological use of materials for a responsible and sustainable construction. Forster unico Hi Forster unico Hi combines all the benefits of standard Forster unico systems with even higher insulation parameters. The system complies with the latest requirements for heat protection, e.g. EnEV 2009 (DE) and SIA 380/1 (CH). The structural profile depth allows the integration of 2- or 3-pane insulated glazing – for Uw values of up to 0.9 W/(m2.K). Simple construction: Only two additional components are needed to make Forster unico into a very efficient heat insulating Forster unico Hi element.

System for energy efficient windows, doors and screens Sustainable, ecological, 100 % steel Forster unico is the revolutionary, thermally insulated profile system for single and double-leaf doors, for windows as well as for exterior glazed units. The basic profiles comprise 100% recyclable steel and contain no synthetic insulating materials – in contrast to all other insulated systems. This innovation, uniquely evocative of a framework style of construction, satisfies the most stringent demands relating to physical and structural functions. This is the latest technology, energy efficiency, attractive design and the ecological use of materials for a responsible and sustainable construction. Forster unico Hi Forster unico Hi combines all the benefits of standard Forster unico systems with even higher insulation parameters. The system complies with the latest requirements for heat protection, e.g. EnEV 2009 (DE) and SIA 380/1 (CH). The structural profile depth allows the integration of 2- or 3-pane insulated glazing – for Uw values of up to 0.9 W/(m2.K). Simple construction: Only two additional components are needed to make Forster unico into a very efficient heat insulating Forster unico Hi element.

System for energy efficient windows, doors and screens Sustainable, ecological, 100 % steel Forster unico is the revolutionary, thermally insulated profile system for single and double-leaf doors, for windows as well as for exterior glazed units. The basic profiles comprise 100% recyclable steel and contain no synthetic insulating materials – in contrast to all other insulated systems. This innovation, uniquely evocative of a framework style of construction, satisfies the most stringent demands relating to physical and structural functions. The impressive slim aspects of window elements combine architectural design, comfort and well-being with excellent heat and sound insulation. This is the latest technology, energy efficiency, attractive design and the ecological use of materials for a responsible and sustainable construction.

System for energy efficient windows, doors and screens Sustainable, ecological, 100 % steel Forster unico is the revolutionary, thermally insulated profile system for single and double-leaf doors, for windows as well as for exterior glazed units. The basic profiles comprise 100% recyclable steel and contain no synthetic insulating materials – in contrast to all other insulated systems. This innovation, uniquely evocative of a framework style of construction, satisfies the most stringent demands relating to physical and structural functions. The impressive slim aspects of window elements combine architectural design, comfort and well-being with excellent heat and sound insulation. This is the latest technology, energy efficiency, attractive design and the ecological use of materials for a responsible and sustainable construction.

System for energy efficient windows, doors and screens Sustainable, ecological, 100 % steel Forster unico is the revolutionary, thermally insulated profile system for single and double-leaf doors, for windows as well as for exterior glazed units. The basic profiles comprise 100% recyclable steel and contain no synthetic insulating materials – in contrast to all other insulated systems. This innovation, uniquely evocative of a framework style of construction, satisfies the most stringent demands relating to physical and structural functions. This is the latest technology, energy efficiency, attractive design and the ecological use of materials for a responsible and sustainable construction. Forster unico Hi Forster unico Hi combines all the benefits of standard Forster unico systems with even higher insulation parameters. The system complies with the latest requirements for heat protection, e.g. EnEV 2009 (DE) and SIA 380/1 (CH). The structural profile depth allows the integration of 2- or 3-pane insulated glazing – for Uw values of up to 0.9 W/(m2.K). Simple construction: Only two additional components are needed to make Forster unico into a very efficient heat insulating Forster unico Hi element.

System for energy efficient windows, doors and screens Sustainable, ecological, 100 % steel Forster unico is the revolutionary, thermally insulated profile system for single and double-leaf doors, for windows as well as for exterior glazed units. The basic profiles comprise 100% recyclable steel and contain no synthetic insulating materials – in contrast to all other insulated systems. This innovation, uniquely evocative of a framework style of construction, satisfies the most stringent demands relating to physical and structural functions. This is the latest technology, energy efficiency, attractive design and the ecological use of materials for a responsible and sustainable construction. Forster unico Hi Forster unico Hi combines all the benefits of standard Forster unico systems with even higher insulation parameters. The system complies with the latest requirements for heat protection, e.g. EnEV 2009 (DE) and SIA 380/1 (CH). The structural profile depth allows the integration of 2- or 3-pane insulated glazing – for Uw values of up to 0.9 W/(m2.K). Simple construction: Only two additional components are needed to make Forster unico into a very efficient heat insulating Forster unico Hi element.

Only 23 mm: Unique ultra-slim profiles for thermal insulated windows Forster unico XS is a system addition that provides thermal insulated window elements and fixed glazing with ultra-slim facings. At the same time, it opens up a diversity of applications. This applies to the numerous opening variations as well as the possibility of installing fillings up to 60 mm to achieve very low U values and excellent sound insulation values. The unique profile design made of 100% steel is ideally suited for renovating old or historic buildings and for modern glass constructions. Forster unico Hi Forster unico Hi combines all the benefits of standard Forster unico systems with even higher insulation parameters. The system complies with the latest requirements for heat protection, e.g. EnEV 2009 (DE) and SIA 380/1 (CH). The structural profile depth allows the integration of 2- or 3-pane insulated glazing – for Uw values of up to 0.9 W/(m2.K). Simple construction: Only two additional components are needed to make Forster unico into a very efficient heat insulating Forster unico Hi element.

Only 23 mm: Unique ultra-slim profiles for thermal insulated windows Forster unico XS is a system addition that provides thermal insulated window elements and fixed glazing with ultra-slim facings. At the same time, it opens up a diversity of applications. This applies to the numerous opening variations as well as the possibility of installing fillings up to 60 mm to achieve very low U values and excellent sound insulation values. The unique profile design made of 100% steel is ideally suited for renovating old or historic buildings and for modern glass constructions. Forster unico Hi Forster unico Hi combines all the benefits of standard Forster unico systems with even higher insulation parameters. The system complies with the latest requirements for heat protection, e.g. EnEV 2009 (DE) and SIA 380/1 (CH). The structural profile depth allows the integration of 2- or 3-pane insulated glazing – for Uw values of up to 0.9 W/(m2.K). Simple construction: Only two additional components are needed to make Forster unico into a very efficient heat insulating Forster unico Hi element.

<p>Bison ScrewJack Pedestals are designed to support heavy pavers over any waterproofed structural surface. Each pedestal utilizes a patented threaded design, making the leveling process during installation a simple turn of the pedestal base. This allows contractors, designers and installers to accurately plan, precisely align, and uniformly install level decks with a combination of ease, speed and accuracy. Integrated spacer tabs ensure accurate spacing, lock the pavers in place, and allow water to drain. <em>Note: Bison ScrewJack Pedestals are sold exclusively in the US and Canada through Oldcastle Westile and their distributors.</em></p> <ul><li>Supports 1000 lbf (4.45 kN) FS:3 per pedestal</li><li>Pedestal tab width 3/16 inch (4.5 mm)</li><li>Adjustable system height range is 1 ¼ to 36 inches (32 to 914.4 mm)</li><li>Bison Brace System required for 24 to 36 inches (609.6 to 914.4 mm)</li><li>Accessories available for heights from 1/8 to 1 ¼ inches (3.175 to 57.15 mm)</li><li>Pedestals made of High Density Copolymer Polypropylene</li><li>Contains 20% post-industrial recycled material</li><li>Impervious to water, mold, and freeze/thaw cycles</li><li>Made in the U.S.A.</li></ul>

Inward opening highly thermally insulated window façade [LIST] Uf value = 1.4 W/(m²K) for 82 mm face width New centre gasket with additional hollow chamber, fins and a new combination of materials which is easier to fabricate Graduated mullion, transom and outer frame options in Residential Line look Large spans due to extensive range of structural mullions Wide variety of design options provided by comprehensive range of profiles and cover caps Efficient solution for ribbon windows Benefit of unitised frame fabrication compared with façade units Concealed Schüco AvanTec system fitting up to 160 kg Burglar resistance up to WK2 (RC 2) in accordance with DIN V ENV 1627 [/LIST]

Inward opening composite window system [LIST] Outstanding, scalable thermal insulation due to innovative insulation concept with a U, value from 0,85 W/(m²k) Increased sound reduction due to double centre gasket level and multi-pane principle up to Rw 53 dB Improved reduction of condensation due to controlled ventilation of the space between the panes Integrated Schüco CCB solar shading, concealed installation Reduced heat transfer due to installation of the Schüco composite Venetian blind with no thermal bridging Concealed blind guidance, no light penetration from the side Tool-free clip installation of the ready-to-use Schüco composite Venetian blind Simplified electrical interface due to pre-assembled plugs (Plug and Play) Outer vent with structural glazing look also available [/LIST]

Metallic elements made of stainless steel with the primary role of clamping and retaining the masonry wall to structural elements. They permit free movement in the two directions contained within the plane of the wall. The anchor consists of two parts, a socket that is mechanically fixed to the structure and an omega that engages the grooves of the socket and whose ends are embedded in the ends of the masonry wall. The anchor is characterized by its great resistance both to traction and to compression as well as by including a SAO device.

Structural post made of 2 mm galvanized steel sheet, to be placed between floor-slabs to increase the masonry wall rigidity. It consists of three parts, two ends and a central part formed by a folded sheet where the GEOANC omegas that connect the masonry wall to the post are inserted. This joint permits a differential movement between the masonry wall and the structure. The telescopic design of these posts permits their placement without the need for welding, as well as the absorption of any slab irregularity.

This bench may be created from conventional wooden slats, but its design is completely unique. The seat sits atop simple structural supports at either side to form a simple and practical design. This bench can be paired with other seating in the Kajen series, such as the backed bench and footrest, or the standard Kajen bench with a backrest and armrests. Design: Thomas Bernstrand.

<p><b>MB-45</b> is a modern aluminium system intended for designing elements of architectural exterior and interior enclosures that do not require thermal insulation, e.g. various types of partition walls, windows, manual and automatic sliding doors, swing doors, vestibules, display windows, ticket box offices, showcases and spatial structures.</p> <p>The characteristic feature of this system is its close connection with<b> MB-60</b> and<b> MB-70</b> window/door systems. The system versatility and attractiveness are additionally enhanced by the possibility to choose from several solution variants in the case of various structural details, e.g.: sealing of the lower door leaf, sealing of the sliding and swing doors, shape of glazing beads and shape and height of the door threshold. This system is also connected with the structure of mortise door <b>MB-45S</b>.</p>

<p><strong>MB-45</strong> is a modern aluminium system intended for designing elements of architectural exterior and interior enclosures that do not require thermal insulation, e.g. various types of partition walls, windows, manual and automatic sliding doors, swing doors, vestibules, display windows, ticket box offices, showcases and spatial structures.</p> <p>The characteristic feature of this system is its close connection with<strong> MB-60</strong> and<strong> MB-70</strong> window/door systems. The system versatility and attractiveness are additionally enhanced by the possibility to choose from several solution variants in the case of various structural details, e.g.: sealing of the lower door leaf, sealing of the sliding and swing doors, shape of glazing beads and shape and height of the door threshold. This system is also connected with the structure of mortise door <strong>MB-45S</strong>.</p> <p><br></p> <p></p>

Hollow clay infill blocks are especially recommended for one-way ribbed slabs with block filler with either steel or precast concrete joists. These hollow blocks are manufactured according to the highest quality and environmental standards. The design of the hollow clay infill block, with vertical partitions and triangular reinforcements at the top and bottom, provides optimum resistance. This feature, along with a near zero breakage rate, make the hollow clay infill block for ribbed slabs an essential constructive element in any high quality and energy-efficient building. The main advantages of ribbed floor slabs over solid concrete slabs are: [LIST] Savings in structural steel, due to its lighter weight Lower labour costs due to its easy assembly Better acoustic and thermal insulation Safe usage due to its high mechanical resistance Excellent adherence with gypsum, mortar and concrete [/LIST] The 12 x 70 cm format is mostly used along the Spanish Mediterranean coast, where it fits perfectly the constructive needs of the area.

Hollow clay infill blocks are especially recommended for one-way ribbed slabs with block filler with either steel or precast concrete joists. These hollow blocks are manufactured according to the highest quality and environmental standards. The design of the hollow clay infill block, with vertical partitions and triangular reinforcements at the top and bottom, provides optimum resistance. This feature, along with a near zero breakage rate, make the hollow clay infill block for ribbed slabs an essential constructive element in any high quality and energy-efficient building. The main advantages of ribbed floor slabs over solid concrete slabs are: [LIST] Savings in structural steel, due to its lighter weight Lower labour costs due to its easy assembly Better acoustic and thermal insulation Safe usage due to its high mechanical resistance Excellent adherence with gypsum, mortar and concrete [/LIST] Versatile and easy to use.

Hollow clay infill blocks are especially recommended for one-way ribbed slabs with block filler with either steel or precast concrete joists. These hollow blocks are manufactured according to the highest quality and environmental standards. The design of the hollow clay infill block, with vertical partitions and triangular reinforcements at the top and bottom, provides optimum resistance. This feature, along with a near zero breakage rate, make the hollow clay infill block for ribbed slabs an essential constructive element in any high quality and energy-efficient building. The main advantages of ribbed floor slabs over solid concrete slabs are: [LIST] Savings in structural steel, due to its lighter weight Lower labour costs due to its easy assembly Better acoustic and thermal insulation Safe usage due to its high mechanical resistance Excellent adherence with gypsum, mortar and concrete [/LIST] The 20x70 cm format is a great choice for medium-depth slabs, and it is easy to use.

Hollow clay infill blocks are especially recommended for one-way ribbed slabs with block filler with either steel or precast concrete joists. These hollow blocks are manufactured according to the highest quality and environmental standards. The design of the hollow clay infill block, with vertical partitions and triangular reinforcements at the top and bottom, provides optimum resistance. This feature, along with a near zero breakage rate, make the hollow clay infill block for ribbed slabs an essential constructive element in any high quality and energy-efficient building. The main advantages of ribbed floor slabs over solid concrete slabs are: [LIST] Savings in structural steel, due to its lighter weight Lower labour costs due to its easy assembly Better acoustic and thermal insulation Safe usage due to its high mechanical resistance Excellent adherence with gypsum, mortar and concrete [/LIST] The 22x70 cm format is a great choice for medium-depth slabs, and it is easy to use.

Hollow clay infill blocks are especially recommended for one-way ribbed slabs with block filler with either steel or precast concrete joists. These hollow blocks are manufactured according to the highest quality and environmental standards. The design of the hollow clay infill block, with vertical partitions and triangular reinforcements at the top and bottom, provides optimum resistance. This feature, along with a near zero breakage rate, make the hollow clay infill block for ribbed slabs an essential constructive element in any high quality and energy-efficient building. The main advantages of ribbed floor slabs over solid concrete slabs are: [LIST] Savings in structural steel, due to its lighter weight Lower labour costs due to its easy assembly Better acoustic and thermal insulation Safe usage due to its high mechanical resistance Excellent adherence with gypsum, mortar and concrete [/LIST] The 25 x 70 cm infill block is especially recommended for deep slabs with high mechanical resistance requirements.

EXTERNAL SINGLE WALL with Jendy Joss® thermal-acoustic high-performance dry system, with easy and fast construction, ready for shaving and painting, coating or every kind of ventilated facade. Do not require counterframes for doors and windows, maximum height 12m, after structural design, especially at wind pressure/depression. Destination: Residential, Industrial, Commercial, Hotel, Hospital Thickness: 237mm Thermal transmittance: U=0.168 W/mqK

Structural brick with hydraulic glued installation. Masonry thickness 20 cm, Insulating type a

Calibric structural brick accessories with vertical perforations for 20 cm common masonry

Calibric structural brick accessories with vertical perforations for 20 cm common masonry

Calibric structural brick accessories with vertical perforations for 20 cm common masonry

Calibric structural brick accessories with vertical perforations for 20 cm common masonry

Structural brick with hydraulic glued installation. Masonry thickness 20 cm, Insulating type a

EXTERNAL PREASSEMBLED SINGLE WALL with Jendy Joss® thermal-acoustic high-performance dry system, with easy and fast construction, ready for shaving and painting, the coating or every kind of ventilated facade. Predisposed windows and doors, maximum height 12m for each module, after structural calculation, especially at wind pressure/depression. Destination: Residential, Industrial, Commercial, Hotel, Hospital Thickness: 237mm Thermal transmittance: U=0.168 W/mqK

WALL SANDWICH PANELS WITH POLYURETHANE CORE WITH CONCEALED FASTENING BALEXTHERM-PU-PIR-W-PLUS FEATURES: [LIST] high thermal insulation properties: the core is made of rigid polyurethane foam and the gasket is introduced in the production process aesthetic appearance of facades: concealed structural connection; a wide range of external lining profiles easy assembly - appropriate profiling of the lock, longitudinal slot and conical inclination of internal joint surface highly durable anti-corrosion layers – appropriate lining shape profiling technology [/LIST]

WALL SANDWICH PANELS WITH MINERAL WOOL CORE WITH CONCEALED FASTENING BALEXTHERM-MW-W-PLUS FEATURES: [LIST] FIRESTOP – high fire resistance properties; unique, two sided shaping of panel and lock joint high fire resistance properties: they may be used as fire partitions high thermal insulation properties – tightly fitted panel connections easy assembly-inclination of internal joint surface, longitudinal slot faciltating the positioning of fastening joints SUPERIOR GASKET – the panels provide a maximum increase in tightness and shorter assembly time, thanks to the option of applying a gasket in the lock joint in production, on the internal side or on both sides. high durability: special line prefabricated mineral wool core highly durable anti-corrosion layers – appropriate lining shape profiling technology aesthetic appearance of the facade – concealed structural connection; a very wide range of external lining profiles and colours [/LIST]

Hebel fire wall panels – 360 minutes fire protection Structural fire protection at the highest level. Hebel fire wall panels are suitable for external and internal walls. Being an incombustible material of fire class A1 (non-flammable), aerated concrete does not contribute to the fire, does not produce smoke or other gases in a case of fire and furthermore effectively blocks off smoke and heat. Hebel aerated concrete meets the requirements of all fire resistance classes from F30 to F180 respectively EI30 to EI180 regulated by national and European standards. Fire behavior of Hebel aerated concrete: - non-flammable - great thermal insulation against heat - not dripping - no smoke or toxic gases - no functional impairment External walls made of Hebel fire wall panels have the same fire resistance than Hebel fire walls and therefore offer a maximum safety against fire flashover. Proofed Safety: A fire behavior test at a German material testing institute for the construction industry (Institute of Building Materials, Solid Construction and Fire Protection at the Technical University of Braunschweig) prooves the high standard of the Hebel fire wall panels. Result: The material resists fire for 360 minutes without any relevant functional impairment. During the planning process of Hebel reinforced panels for walls, ceilings and roofs, Hebel experts will support you to find the right design according to your requirements right from the start. The system solution shown here is exemplary for a first planning. The suitability and specification must be carried out in agreement with the planner in any case.

Hebel fire wall panels – 360 minutes fire protection Structural fire protection at the highest level. Hebel fire wall panels are suitable for external and internal walls. Being an incombustible material of fire class A1 (non-flammable), aerated concrete does not contribute to the fire, does not produce smoke or other gases in a case of fire and furthermore effectively blocks off smoke and heat. Hebel aerated concrete meets the requirements of all fire resistance classes from F30 to F180 respectively EI30 to EI180 regulated by national and European standards. Fire behavior of Hebel aerated concrete: - non-flammable - great thermal insulation against heat - not dripping - no smoke or toxic gases - no functional impairment External walls made of Hebel fire wall panels have the same fire resistance than Hebel fire walls and therefore offer a maximum safety against fire flashover. Proofed Safety: A fire behavior test at a German material testing institute for the construction industry (Institute of Building Materials, Solid Construction and Fire Protection at the Technical University of Braunschweig) prooves the high standard of the Hebel fire wall panels. Result: The material resists fire for 360 minutes without any relevant functional impairment. During the planning process of Hebel reinforced panels for walls, ceilings and roofs, Hebel experts will support you to find the right design according to your requirements right from the start. The system solution shown here is exemplary for a first planning. The suitability and specification must be carried out in agreement with the planner in any case.

Precast external thermal insulation system with photocatalytic performance for building. ETIXc is an industrial precast panel system to reduce the energetic demand of buildings. It may be used on: - Energetic refurbishment of existing façades. - New jobs. Durability and architectonic quality: - High quality finishing surfaces. - Possibility of pigmentation and personalization by architectural texturization and engravement. Thermal and acoustic insulation: - Reduction up to 70% of the thermal transmittance of the existing façades. Energetic savings. - Improvement of the acoustic performance of the façade (better performance than a traditional ETIS). Photocatalytic activity: - Self-cleaning: longer maintenance of color and original texture. - Decontamination: depolluting activity (decreasing environmental contamination/pollution). Quick and easiness of mounting: - Without ancillary substructure. External mounting, minimum neighbors annoyance - Large format pieces (3 x 1,5 m). - Safety: metallic fixing system from slab to slab. Concrete reinforced with PVA structural fibers to strengthen the concrete integrity. - Lower dependence on atmospheric conditions for mounting operations. - The fixing system admits horizontal and vertical regulation, this allows to avoid the irregularities of the existing façade, creating, if necessary, a watertight air chamber where the technical installations existing over the façade could be accommodated in.

The new tehalit.BKG floor trunking is flush floor trunking which has a great deal to offer. This floor trunking is available in widths of 200, 300, 400 and 500 mm. It comes in heights of 60 and 80 mm. The three compartments inside the trunking have the following functions. Compartments 1 and 3 provide clean routing of power and data lines. The middle compartment is reserved for the end user. This is where the end user can insert their power or data devices into the sockets. In order to route cables from the trunking tested according to EN 50085, there are brush outlets on the front which are covered when not in use and thus present no risk of accident. Cast floors can be laid with recessed covers. The trunking system can be levelled from the inside or outside depending on the structural conditions. If levelled from the outside, the cable compartment for the lines also increases.

You are viewing a ASSA ABLOY SW1000B Balance Door System, which is an automatic door solution with one door leaf, perfect for narrow passages or in corridors with space saving features. Very effective in windy conditions, it combines the benefits of swing and sliding door systems. The door should be installed within the structural opening with no alterations to floor or ceiling. Constructed with the ASSA ABLOY Frame profile system and available with various glazing options upto 40mm. Finishes as standard are RAL powder coated or anodised. To ensure functionality in case of power failure, the door system can be equipped with an integrated battery powered back up system. This solution will normally achieve a greater clear open width over a folding door solution. Besam

You are viewing the ASSA ABLOY SW1000B Balance Door System, which is an automatic door solution with two door leaves, perfect for narrow passages or in corridors with space saving features. Very effective in windy conditions, it combines the benefits of swing and sliding door systems. The door should be installed within the structural opening with no alterations to floor or ceiling. Constructed with the ASSA ABLOY Frame profile system and available with various glazing options upto 40mm. Finishes as standard are RAL powder coated or anodised. To ensure functionality in case of power failure, the door system can be equipped with an integrated battery powered back up system. This solution will normally achieve a greater clear open width over a folding door solution. Besam

Besam ASSA ABLOY SL500 Telescopic overhead concealed sets a new standard in telescopic performance by providing superior support and stability. By utilizing an exclusive “door on door” design, the Besam ASSA ABLOY SL500 Telescopic innovative design eliminates inferior suspended track systems by putting all the door weight to the structural portion of the automatic door header via two structural boxes with integrated replaceable aluminum tracks. Disclaimer: This product is available from ASSA ABLOY Entrance Systems - North America. Consult a local representative in your Region to discuss availability.

Besam ASSA ABLOY SL500 Telescopic overhead concealed with transom sets a new standard in telescopic performance by providing superior support and stability. By utilizing an exclusive “door on door” design, the Besam ASSA ABLOY SL500 Telescopic innovative design eliminates inferior suspended track systems by putting all the door weight to the structural portion of the automatic door header via two structural boxes with integrated replaceable aluminum tracks. Disclaimer: This product is available from ASSA ABLOY Entrance Systems - North America. Consult a local representative in your Region to discuss availability.

Besam ASSA ABLOY SL500 Telescopic surface mount sets a new standard in telescopic performance by providing superior support and stability. By utilizing an exclusive “door on door” design, the Besam ASSA ABLOY SL500 Telescopic innovative design eliminates inferior suspended track systems by putting all the door weight to the structural portion of the automatic door header via two structural boxes with integrated replaceable aluminum tracks. Disclaimer: This product is available from ASSA ABLOY Entrance Systems - North America. Consult a local representative in your Region to discuss availability.

Neutrality has many forms – it may be both intriguing and interesting, especially when it is skillfully highlighted by various details. The Rino collection offers you a selection of beige, grey and graphite colours. Each colour brings a fascinating raw quality, which reminds us of cement. This design was emphasized by structural elements, i.e. board texture on a cement surface. This may be used not only in spacious, raw interiors, such as lofts, but also in smaller rooms. The different graphic styles of the tiles give them a natural and unique quality.

Neutrality has many forms – it may be both intriguing and interesting, especially when it is skillfully highlighted by various details. The Rino collection offers you a selection of beige, grey and graphite colours. Each colour brings a fascinating raw quality, which reminds us of cement. This design was emphasized by structural elements, i.e. board texture on a cement surface. This may be used not only in spacious, raw interiors, such as lofts, but also in smaller rooms. The different graphic styles of the tiles give them a natural and unique quality.

Neutrality has many forms – it may be both intriguing and interesting, especially when it is skillfully highlighted by various details. The Rino collection offers you a selection of beige, grey and graphite colours. Each colour brings a fascinating raw quality, which reminds us of cement. This design was emphasized by structural elements, i.e. board texture on a cement surface. This may be used not only in spacious, raw interiors, such as lofts, but also in smaller rooms. The different graphic styles of the tiles give them a natural and unique quality.

Neutrality has many forms – it may be both intriguing and interesting, especially when it is skillfully highlighted by various details. The Rino collection offers you a selection of beige, grey and graphite colours. Each colour brings a fascinating raw quality, which reminds us of cement. This design was emphasized by structural elements, i.e. board texture on a cement surface. This may be used not only in spacious, raw interiors, such as lofts, but also in smaller rooms. The different graphic styles of the tiles give them a natural and unique quality.

Naturstone collection was inspired by the structure of a rock. Thanks to the use of the latest, unique in Europe technology of double charging with the application of the dry coloring Freestyle system, the surface of the tiles is adorned with a unique tonal design that perfectly reflects the diversified structure of the stone. The design and color palette of particular tiles are one of a kind, just like in nature where we will never find two identical natural stones. The tiles can be purchased in opaque, polished, and structural versions. Plinths and treads complement the collection allowing the tiles to be used in the entire apartment, including staircases or terraces. What makes Naturstone special are additional formats and decorative elements cut from the tiles available on request.

Naturstone collection was inspired by the structure of a rock. Thanks to the use of the latest, unique in Europe technology of double charging with the application of the dry coloring Freestyle system, the surface of the tiles is adorned with a unique tonal design that perfectly reflects the diversified structure of the stone. The design and color palette of particular tiles are one of a kind, just like in nature where we will never find two identical natural stones. The tiles can be purchased in opaque, polished, and structural versions. Plinths and treads complement the collection allowing the tiles to be used in the entire apartment, including staircases or terraces. What makes Naturstone special are additional formats and decorative elements cut from the tiles available on request.

Naturstone collection was inspired by the structure of a rock. Thanks to the use of the latest, unique in Europe technology of double charging with the application of the dry coloring Freestyle system, the surface of the tiles is adorned with a unique tonal design that perfectly reflects the diversified structure of the stone. The design and color palette of particular tiles are one of a kind, just like in nature where we will never find two identical natural stones. The tiles can be purchased in opaque, polished, and structural versions. Plinths and treads complement the collection allowing the tiles to be used in the entire apartment, including staircases or terraces. What makes Naturstone special are additional formats and decorative elements cut from the tiles available on request.

Naturstone collection was inspired by the structure of a rock. Thanks to the use of the latest, unique in Europe technology of double charging with the application of the dry coloring Freestyle system, the surface of the tiles is adorned with a unique tonal design that perfectly reflects the diversified structure of the stone. The design and color palette of particular tiles are one of a kind, just like in nature where we will never find two identical natural stones. The tiles can be purchased in opaque, polished, and structural versions. Plinths and treads complement the collection allowing the tiles to be used in the entire apartment, including staircases or terraces. What makes Naturstone special are additional formats and decorative elements cut from the tiles available on request.

Naturstone collection was inspired by the structure of a rock. Thanks to the use of the latest, unique in Europe technology of double charging with the application of the dry coloring Freestyle system, the surface of the tiles is adorned with a unique tonal design that perfectly reflects the diversified structure of the stone. The design and color palette of particular tiles are one of a kind, just like in nature where we will never find two identical natural stones. The tiles can be purchased in opaque, polished, and structural versions. Plinths and treads complement the collection allowing the tiles to be used in the entire apartment, including staircases or terraces. What makes Naturstone special are additional formats and decorative elements cut from the tiles available on request.

Naturstone collection was inspired by the structure of a rock. Thanks to the use of the latest, unique in Europe technology of double charging with the application of the dry coloring Freestyle system, the surface of the tiles is adorned with a unique tonal design that perfectly reflects the diversified structure of the stone. The design and color palette of particular tiles are one of a kind, just like in nature where we will never find two identical natural stones. The tiles can be purchased in opaque, polished, and structural versions. Plinths and treads complement the collection allowing the tiles to be used in the entire apartment, including staircases or terraces. What makes Naturstone special are additional formats and decorative elements cut from the tiles available on request.

Naturstone collection was inspired by the structure of a rock. Thanks to the use of the latest, unique in Europe technology of double charging with the application of the dry coloring Freestyle system, the surface of the tiles is adorned with a unique tonal design that perfectly reflects the diversified structure of the stone. The design and color palette of particular tiles are one of a kind, just like in nature where we will never find two identical natural stones. The tiles can be purchased in opaque, polished, and structural versions. Plinths and treads complement the collection allowing the tiles to be used in the entire apartment, including staircases or terraces. What makes Naturstone special are additional formats and decorative elements cut from the tiles available on request.

ALZATINA is an accessory element of CLIMABLOCK® for height compensation of the walls made with the CLIMABLOCK® construction system of Pontarolo Engineering spa. ALZATINA is made in EPS Twinpor in the measures of H 5 – 10 – 20 – 40 cm, with thicknesses of 6,4 – 9,4 – 12,4 – 18,4 cm. CLIMABLOCK® is an ICF-like technology to create structural insulated walls. These stay-in-place forming elements in EPS CS(10)150 Twinpor permit to cast a steel reinforced wall with an outer and an inner insulation layer in EPS, in just one step. CLIMABLOCK®, patented system of Pontarolo Engineering spa, is the fastest and more economic way to create buildings with low energetic impact (Class A, NZEB …). The main advantages are: - Energy saving: high insulation, thermal inertia and acoustic insulation.- Efficient construction process: simple and quick installation, easy handling, adaptable to any project design. - Economically sustainable: precise costs, high thermal, acoustic and seismic performances, with low maintenances. - High living comfort.

CLIMABLOCK® is an ICF-like technology to create structural insulated walls. These stay-in-place forming elements in EPS CS(10)150 Twinpor permit to cast a steel reinforced wall with an outer and an inner insulation layer in EPS, in just one step. CLIMABLOCK®, patented system of Pontarolo Engineering spa, is the fastest and more economic way to create buildings with low energetic impact (Class A, NZEB …). The main advantages are: - Energy saving: high insulation, thermal inertia and acoustic insulation. - Efficient construction process: simple and quick installation, easy handling, adaptable to any project design. - Economically sustainable: precise costs, high thermal, acoustic and seismic performances, with low maintenances. - High living comfort. Linear and corner elements are available as well as many accessories like ALZATINA the height compensation element.

CLIMABLOCK® Outside Corner is a stay-in-place form for walls made of two parallel insulating panels 40 cm height forming a 90° corner in EPS TWINPOR facing each other and hold together by plastic webs of a certain measure that defines the thickness of the concrete wall: can be of 16,2 (17 nominal) and 19,2 (20 nominal). The internal insulating panel is 6,4 cm thick, while the external insulating panel can be of 6,4 – 9,4 – 12,4 – 18,4 cm. CLIMABLOCK® is an ICF-like technology to create structural insulated walls. These stay-in-place forming elements in EPS CS(10)150 Twinpor permit to cast a steel reinforced wall with an outer and an inner insulation layer in EPS, in just one step. CLIMABLOCK®, patented system of Pontarolo Engineering spa, is the fastest and more economical way to create buildings with low energetic impact (Class A, NZEB …). The main advantages are: - Energy saving: high insulation, thermal inertia and acoustic insulation. - Efficient construction process: simple and quick installation, easy handling, adaptable to any project design. - Economically sustainable: precise costs, high thermal, acoustic and seismic performances, with low maintenances. - High living comfort.

CUPOLEX® RIALTO SMALL, patented technology of Pontarolo Engineering spa, is a system to create high raised floors, with non-standard heights or inclined slabs. Can be used alone or together with CUPOLEX® RIALTO technology in the same area, distances between the columns of 57 or 28,5 cm can be obtained. Is used to facilitate the installation or in the cases where a higher structural resistance is required. CUPOLEX® RIALTO permits to create a raised slab with heights between 50 and 250 cm. The system is made of domes, tubes and bases, it is easily and quickly assembled on site: creating a matrix of bases on the prepared plane surface; on top of the bases are placed the plastic tubes of diameter 12,5 cm and variable height depending on the project requirements; at last the domes, 28,5 x 57 cm, are installed on top of the tubes. When mutually connected, all these elements can receive the slab steel reinforcement and the concrete cast giving it a unique geometry with a hollowed space underneath the slab.

CLIMABLOCK® Inside Corner is a stay-in-place form for walls made of two parallel insulating panels 40 cm height forming a 90° corner in EPS TWINPOR facing each other and hold together by plastic webs of a certain measure that defines the thickness of the concrete wall: can be of 16,2 (17 nominal) and 19,2 (20 nominal). The internal insulating panel is 6,4 cm thick, while the external insulating panel can be of 6,4 – 9,4 – 12,4 – 18,4 cm. CLIMABLOCK® is an ICF-like technology to create structural insulated walls. These stay-in-place forming elements in EPS CS(10)150 Twinpor permit to cast a steel reinforced wall with an outer and an inner insulation layer in EPS, in just one step. CLIMABLOCK®, patented system of Pontarolo Engineering spa, is the fastest and more economical way to create buildings with low energetic impact (Class A, NZEB …). The main advantages are: - Energy saving: high insulation, thermal inertia and acoustic insulation. - Efficient construction process: simple and quick installation, easy handling, adaptable to any project design. - Economically sustainable: precise costs, high thermal, acoustic and seismic performances, with low maintenances. - High living comfort.

PONTEX is recycled polypropylene element that, combined with CUPOLEX® of Pontarolo Engineering can be used to create beams so that aerated floors become self-bearing. If the soil is unsuitable to hold the slab load design, Pontex is introduced to the slab design which in turn will create a one directional or a two directional structural slab that can be partially or fully supported by a beam/pile foundation or foundation walls.

<p><strong>MB-45</strong> is a modern aluminium system intended for designing elements of architectural exterior and interior enclosures that do not require thermal insulation, e.g. various types of partition walls, windows, manual and automatic sliding doors, swing doors, vestibules, display windows, ticket box offices, showcases and spatial structures.</p> <p>The characteristic feature of this system is its close connection with<strong> MB-60</strong> and<strong> MB-70</strong> window/door systems. The system versatility and attractiveness are additionally enhanced by the possibility to choose from several solution variants in the case of various structural details, e.g.: sealing of the lower door leaf, sealing of the sliding and swing doors, shape of glazing beads and shape and height of the door threshold. This system is also connected with the structure of mortise door <strong>MB-45S</strong>.</p>

<p><strong>MB-45</strong> is a modern aluminium system intended for designing elements of architectural exterior and interior enclosures that do not require thermal insulation, e.g. various types of partition walls, windows, manual and automatic sliding doors, swing doors, vestibules, display windows, ticket box offices, showcases and spatial structures.</p> <p>The characteristic feature of this system is its close connection with<strong> MB-60</strong> and<strong> MB-70</strong> window/door systems. The system versatility and attractiveness are additionally enhanced by the possibility to choose from several solution variants in the case of various structural details, e.g.: sealing of the lower door leaf, sealing of the sliding and swing doors, shape of glazing beads and shape and height of the door threshold. This system is also connected with the structure of mortise door <strong>MB-45S</strong>.</p>

<p><strong>MB-45</strong> is a modern aluminium system intended for designing elements of architectural exterior and interior enclosures that do not require thermal insulation, e.g. various types of partition walls, windows, manual and automatic sliding doors, swing doors, vestibules, display windows, ticket box offices, showcases and spatial structures.</p> <p>The characteristic feature of this system is its close connection with<strong> MB-60</strong> and<strong> MB-70</strong> window/door systems. The system versatility and attractiveness are additionally enhanced by the possibility to choose from several solution variants in the case of various structural details, e.g.: sealing of the lower door leaf, sealing of the sliding and swing doors, shape of glazing beads and shape and height of the door threshold. This system is also connected with the structure of mortise door <strong>MB-45S</strong>.</p>

<p>The new, modern MB-TT50 curtain wall system goes a step ahead in functionality and effectiveness compared to classic crossbar facades. It offers exceptional insulation and weather performance achieved by special 3 zone cascade drainage and ventilation of the glazing rebates. Its innovative construction enables to reasonably reduce the time required to manufacture and construct the complete curtain wall. It is designed to serve as the base system for security anti burglary and fire rated varieties.</p> <p>Features and benefits:</p> <ul><li>enhanced thermal insulation</li><li>glazing up to 56 mm</li><li>large selection of angle connections to enable greater design flexibility</li><li>high capacity mullion-transom connections (2,5 KN) coupled with wide range of glazing to allow the use of large size, heavy glazing panes</li><li>transom-transom constructions option</li><li>3 zone drainage and ventilation system reinforced with set of gaskets to provide protection against the most unfavorable weather conditions</li><li>selection of windows and doors available including roof vents, concealed vents and parallel windows</li><li>semi structural EFEKT glazing option</li><li>compliance with CE marking requirements</li></ul>

<p><b>MB-45</b> is a modern aluminium system intended for designing elements of architectural exterior and interior enclosures that do not require thermal insulation, e.g. various types of partition walls, windows, manual and automatic sliding doors, swing doors, vestibules, display windows, ticket box offices, showcases and spatial structures.</p> <p>The characteristic feature of this system is its close connection with<b> MB-60</b> and<b> MB-70</b> window/door systems. The system versatility and attractiveness are additionally enhanced by the possibility to choose from several solution variants in the case of various structural details, e.g.: sealing of the lower door leaf, sealing of the sliding and swing doors, shape of glazing beads and shape and height of the door threshold. This system is also connected with the structure of mortise door <b>MB-45S</b>.</p>

<p><strong>MB-45</strong> is a modern aluminium system intended for designing elements of architectural exterior and interior enclosures that do not require thermal insulation, e.g. various types of partition walls, windows, manual and automatic sliding doors, swing doors, vestibules, display windows, ticket box offices, showcases and spatial structures.</p> <p>The characteristic feature of this system is its close connection with<strong> MB-60</strong> and<strong> MB-70</strong> window/door systems. The system versatility and attractiveness are additionally enhanced by the possibility to choose from several solution variants in the case of various structural details, e.g.: sealing of the lower door leaf, sealing of the sliding and swing doors, shape of glazing beads and shape and height of the door threshold. This system is also connected with the structure of mortise door <strong>MB-45S</strong>.</p> <p><br></p> <p></p>

<p><strong>MB-45</strong> is a modern aluminium system intended for designing elements of architectural exterior and interior enclosures that do not require thermal insulation, e.g. various types of partition walls, windows, manual and automatic sliding doors, swing doors, vestibules, display windows, ticket box offices, showcases and spatial structures.</p> <p>The characteristic feature of this system is its close connection with<strong> MB-60</strong> and<strong> MB-70</strong> window/door systems. The system versatility and attractiveness are additionally enhanced by the possibility to choose from several solution variants in the case of various structural details, e.g.: sealing of the lower door leaf, sealing of the sliding and swing doors, shape of glazing beads and shape and height of the door threshold. This system is also connected with the structure of mortise door <strong>MB-45S</strong>.</p> <p><br></p> <p></p>

Fire resistant sloped glazing EI30 and EI60 with attachment profiles FLEXIBLE, FAST, ECONOMICAL. The system offers great configuration flexibility to both planner and architect because of the unlimited choice in the sub-structures. Forster thermfix light makes it possible to mount a sealing system on commercially-available steel sub-structures. The system is characterized by basic and quick processing allowing improved economics. The advantages of the system • Controlled rain and condense water ducts through overlapping inner seals at the crossing and end-points of the rafters and mullions • Controlled ventilation and drainage of the glass rebates • Continuous screw mounting strip: free positioning of the fixing screws. • Functional outer weatherstripping system: two component seals in an aluminium press bar, crossing points sealed with inserts. • High degree of freedom of sizes and weights of filling elements as the glass carrier pads are laid out to meet the requirements of the specific type of construction. • Hidden or visible screw-fastened pressure strips can be used in the rafter and transom area. • Welded or clipped sub-structure • Combination with existing vertical facade system Forster thermfix light • High structural performance figures certified • Due to the use of a rebate space insulator, highly thermally insulated overhead glazing can be achieved

Sloped glazing with attachment profiles FLEXIBLE, FAST, ECONOMICAL. The system offers great configuration flexibility to both planner and architect because of the unlimited choice in the sub-structures. Forster thermfix light makes it possible to mount a sealing system on commercially-available steel and aluminium profiles as well as on wooden sub-structures. The system is characterized by basic and quick processing allowing improved economics. The advantages of the system • Controlled rain and condense water ducts through overlapping inner seals at the crossing and end-points of the rafters and mullions • Controlled ventilation and drainage of the glass rebates • Continuous screw mounting strip: free positioning of the fixing screws. • Functional outer weatherstripping system: two component seals in an aluminium press bar, crossing points sealed with inserts. • High degree of freedom of sizes and weights of filling elements as the glass carrier pads are laid out to meet the requirements of the specific type of construction. • Hidden or visible screw-fastened pressure strips can be used in the rafter and transom area. • Welded or clipped sub-structure • Combination with existing vertical facade system Forster thermfix light • High structural performance figures certified • Due to the use of a rebate space insulator, highly thermally insulated overhead glazing can be achieved

A-COLLECTION design by Fran Silvestre, is born by the relation between two elements. On the one hand, the structural metallic frame made of a minimalsquared profile with an orthogonal geometry which ensures the piece’s stability. On the other hand, the organic geometry of the wooden chassis provides comfort and ergonomy to the piece. Maybe, sitting down touching wood brings good luck.

A-COLLECTION design by Fran Silvestre, is born by the relation between two elements. On the one hand, the structural metallic frame made of a minimalsquared profile with an orthogonal geometry which ensures the piece’s stability. On the other hand, the organic geometry of the wooden chassis provides comfort and ergonomy to the piece. Maybe, sitting down touching wood brings good luck.