TOTAL LENGTH AND WIDTH CONTROLS CAN NOT BE USED POINT LIGHT, NO SHADOW OPTION

THE SIZE OF THIS LAMP IS FIXED TOTAL LENGTH AND WIDTH CONTROLS CAN NOT BE USED POINT LIGHT, NO SHADOW OPTION

THE SIZE OF THIS LAMP IS FIXED TOTAL LENGTH AND WIDTH CONTROLS CAN NOT BE USED THE LENGTH OF THE LAMPSHADE IS 1.65 M POINT LIGHT, NO SHADOW OPTION

THE SIZE OF THIS LAMP IS FIXED TOTAL LENGTH AND WIDTH CONTROLS CAN NOT BE USED POINT LIGHT, NO SHADOW OPTION

THE SIZE OF THIS LAMP IS FIXED TOTAL LENGTH AND WIDTH CONTROLS CAN NOT BE USED POINT LIGHT, NO SHADOW OPTION

Patented tent system from Gibus

Text with shadow ©2012 Beister, Hamburg, Germany

Recessed ceiling spot lamp.

From AC19 INT Library, TESTING only

IES compatible light source.

Fluorescent wall lamp.

Recessed halogen ceiling lamp.

Ceiling mounted spotlight kit.

The chair Bergen is designed by Hallgeir Homstvedt. Bergen was originally developed for a project to a university in Bergen, Norway. After further development the chair is now launched in our collection with its inspiring expression. In a certain light you can, by reading the shadow, imagine where Homstvedt found his inspiration - the beautiful windows of the university. “I designed this chair for the competition which I won for the furnishing of the newly renovated auditorium in the Bergen University, originally built in 1894. The imposing window valves in the room were important as inspiration. The shapes are reflected in the square back and the circular seat. The chair’s character lies in the meeting between these two surfaces, giving the impression of floating in the air, with only a small concealed point of attachment. This gives the chair a minimalistic and slender character, with good stacking capacity. The brief for the competition stated that the auditorium must hold four hundred seated audience members, but that it can quickly and swiftly be refurnished for a dinner for a hundred people.” / Hallgeir Homstvedt

Thermally insulated aluminium façade system with concealed opening units [LIST] Slimline profiles with the same look for vents and fixed fields Similar to a mullion/transom construction with an internal and external face width of 60 mm Uf value to 1.5 W/(m²K) including screw factor with 50 mm glass Merging of the vent and load-bearing structure: no additional insert outer frame required Vent and outer frame flush-fitted with minimal shadow gap Turn/tilt window possible Can be used for classic, floor-to-ceiling ribbon windows including safety barrier and punched opening [/LIST]

Lucia collection is composed of natural trendy colours characterised by linear-edged, midsize particles: three of those designed by Dutch Star Designer, Marcel Wanders. Colours: Red Quinoa (W010), Lentil (W007), , Ice Queen (W001), Shadow Queen (W003), Star Queen (W004). Thickness: 12mm. HI-MACS® is a solid surface material that can be moulded into any shape. It is widely used for architectural and interior applications, such as sculptural and high performance wall-cladding or kitchen, bathroom and furniture surfaces, in commercial, residential and public space projects. It is composed of acrylic, natural minerals and pigments that come together to provide a smooth, non-porous and visually seamless surface which meets the highest standards for quality, aesthetics, fabrication, functionality and hygiene – offering manifold advantages over conventional materials. LG Hausys’ HI-MACS® uses a simple heating process to give three-dimensional thermoplastic forming capabilities, allows visually seamless designs, offers a virtually limitless range of colours and – for some shades - exhibits a special translucency when exposed to light. Although HI-MACS® is almost as robust as stone, it can be worked in a similar way as wood: it can be sawn, routed, drilled or sanded. Visit himacs.eu for more information.

<p>EQUITONE [linea] is a unique 3D shaped, through-coloured facade material that plays with light and shadow. Linea displays a linear texture that highlights the raw inner texture of the core fibre cement material. Every moment of the day, the changing angle of the daylight gives the facade material a different aspect. The material comes in a large panel size and can be transformed into any size or shape in the workshop or on site. No matter what design options you explore, EQUITONE’s through-coloured nature guarantees crisp, monolithic details.</p> <p>Both visible and invisible fixing options exist for EQ2UITONE [linea].</p>

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

The Concrete Collection : Warm-tones concrete-like finishes are now available in the solid surface material, providing completely new opportunities for architects and designers. Colours: Urban Concrete (G554), Steel Concrete (G555), Chic Concrete (M551), Shadow Concrete (M552), Ebony Concrete(M553). Thickness : 12mm. HI-MACS® is a solid surface material that can be moulded into any shape. It is widely used for architectural and interior applications, such as sculptural and high performance wall-cladding or kitchen, bathroom and furniture surfaces, in commercial, residential and public space projects. It is composed of acrylic, natural minerals and pigments that come together to provide a smooth, non-porous and visually seamless surface which meets the highest standards for quality, aesthetics, fabrication, functionality and hygiene – offering manifold advantages over conventional materials. LG Hausys’ HI-MACS® uses a simple heating process to give three-dimensional thermoplastic forming capabilities, allows visually seamless designs, offers a virtually limitless range of colours and – for some shades - exhibits a special translucency when exposed to light. Although HI-MACS® is almost as robust as stone, it can be worked in a similar way as wood: it can be sawn, routed, drilled or sanded. Visit himacs.eu for more information.

Yang is a bi-emission indoor lamp made of AirCoral® and installable on walls. It has a multifaceted form, a twine of inclined surfaces crossing each other on which the emanated beam plays, creating a juxtaposition of light and shadow. Yang scatters a welcoming light which does not invade spaces, but embraces them. AirCoral® body IP40 protection grade Dimensions 500 x 110 x 90 mm Light source LED LED colour temperature: 3000 K (on demand 2700 K - 4000 K)