Tap with different types.

Humko Veggy Wall is a small vertical garden, which can be hengd on the wall. It is available in a different color combination of the panels and frame. It has small integrated water reservoar of 3,5 liters with water pump, microprocesor, humidity sensor and level senzor.

Humko Veggy is a self standing vertical garden with 50 liters water reservoir, water pump, microprocesor, humidity sensor and optionally with solenoid valve for automatic water filling.

GRAPHISOFT's travelling ambassador constantly roaming around the world!

#msktp://www.idobathroom.com www.bimlab.fi changelog 01.04.2013 -initial release

# A fully touch-free towel dispenser for locations where service speed, maximum hygiene and quality are required # The system runs on batteries, 4 x LR20 – D 1.5V (not supplied). Do not use re-chargeable batteries. # Adjustable settings for paper length and delay can be matched with the customer’s needs # An advanced refill system with stub-roll function for higher capacity

# A fully touch-free towel dispenser for locations where service speed, maximum hygiene and quality are required # The system runs on batteries, 4 x LR20 – D 1.5V (not supplied). Do not use re-chargeable batteries. # Adjustable settings for paper length and delay can be matched with the customer’s needs # An advanced refill system with stub-roll function for higher capacity

A modern design with smooth surfaces and clean lines that fits seamlessly in your washroom. Create a great impression that boosts the high-quality image of your facility. Stylish stainless steel with anti finger print coating looks great and stays clean. Sensor-activated, gives a high-tech impression Touch-free, only touch the towel you use – secures good hygiene Adjustable sheet length, for flexible use One-at-a-time dispensing for reduced consumption High capacity and LED refill indicator ensures towels never run out

A modern design with smooth surfaces and clean lines that fits seamlessly in your washroom. Create a great impression that boosts the high-quality image of your facility. Stylish stainless steel with anti finger print coating looks great and stays clean.

A modern design with smooth surfaces and clean lines that fits seamlessly in your washroom. Create a great impression that boosts the high-quality image of your facility. Stylish stainless steel with anti finger print coating looks great and stays clean.

A modern design with smooth surfaces and clean lines that fits seamlessly in your washroom. Create a great impression that boosts the high-quality image of your facility. Stylish stainless steel with anti finger print coating looks great and stays clean.

A modern design with smooth surfaces and clean lines that fits seamlessly in your washroom. Create a great impression that boosts the high-quality image of your facility. Stylish stainless steel with anti finger print coating looks great and stays clean. [LIST] Modern and seamless design – make the right impression Easy to clean stainless steel with anti-fingerprint protection/coating - keeps the high class look for a better experience Sensor-activated, gives a high-tech impression Touch free and proven easy-to-use design by third party certificate promotes good hand hygiene for all washroom visitors Proven Easy to use for the cleaning staff saving time for refilling LED refill indicator indicates need for maintenance [/LIST]

The Tork Elevation® Matic® Roll Hand Towel Dispenser with Intuition® Sensor presents the most advanced electronic system in the industry today. The touch-free electronic virtually eliminates cross contamination while cutting back on supply waste. Each unit features a choice of two dispensing modes. The towel remains inside the cabinet until the user activates the sensor, delivers maximum hygiene. An adjustable towel length of 8 inches to 24 inches, and a stub roll compartment combine to deliver more precise control of consumption are a few of the features available. Batteries lasts up to 40 rolls on average with normal usage. It's easy to reach and simple to reload. Versatile Installation- can be mounted directly to wall or within a recessed compartment. Numerous back-plate mounting slots fit most any pattern. Utilizes any Tork H1 Roll Towel. Uses 3 "D size" batteries.

Aluminum finish for upscale and image restrooms. Touch-free system: improved hygiene High capacity: less maintenance Long battery life: environmentally considerate

The Tork Elevation® Matic® Roll Hand Towel Dispenser with Intuition® Sensor presents the most advanced electronic system in the industry today. The touch-free electronic virtually eliminates cross contamination while cutting back on supply waste. Each unit features a choice of two dispensing modes. The towel remains inside the cabinet until the user activates the sensor, delivers maximum hygiene. An adjustable towel length of 8 inches to 24 inches, and a stub roll compartment combine to deliver more precise control of consumption are a few of the features available. Batteries lasts up to 40 rolls on average with normal usage. It's easy to reach and simple to reload. Versatile Installation- can be mounted directly to wall or within a recessed compartment. Numerous back-plate mounting slots fit most any pattern. Utilizes any Tork H1 Roll Towel. Uses 3 "D size" batteries.

The Tork Elevation dispenser hand towel roll sensor offers hygienic touch free dispensing and flexible usage consumption control and presents a high-tech impression. [LIST] Sensor activated Touch-free, only touch the towel you use: Secures good hygiene

The Tork Elevation dispenser hand towel roll sensor offers hygienic touch free dispensing and flexible usage consumption control and presents a high-tech impression. Sensor activated Touch-free, only touch the towel you use: Secures good hygiene. Eas

Tork Elevation sensor foam soap dispenser delivers a touch free and luxurious experience. The sealed refill bottle with a single use pump enables quick and easy refilling. Another benefit with the sealed refills is that the risk of contaminating soap whe

A surface mounted, sensor activated, automatic, roll paper towel dispenser. The unit dispenses a paper towel automatically only when hands are place in position below the dispenser for maximum sanitation and hygiene. May include adjustable settings for sheet length, time delay, and sensor range. Unit is battery operated or with optional AC power adapter.

A filmless digital imaging system using a sensor to acquire and digitize dental x-ray images for viewing, storing or printing. The sensor is used in conjunction with a film based x-ray system. Images are digitized and transmitted to a computer via a standard USB port and is compatible with laptop or desktop systems.

Electronic high-neck basin faucet (one water) with sensor integrated in the spout. Mains operated at 230V. It includes power source.

Electronic basin faucet (one water) with sensor integrated in the spout. Mains operated at 230V. It includes power source.

Electronic basin faucet (one water) with sensor integrated in the spout. Powered by four 1.5V LRG (AA) alkaline batteries.

Electronic built-in basin faucet (one water) with sensor integrated in the spout. Powered by four 1.5V LRG (AA) alkaline batteries.

Electronic high-neck basin faucet (one water) with sensor integrated in the spout. Powered by four 1.5V LRG (AA) alkaline batteries.

Aluminium mirror cabinet with vertical LED light and socket EU, without sensor switch Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements, with sockets EU, with sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 3 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 4x 14W/m, 4000 Kelvin (daylight), IP44, 230V 8 glass shelves (adjustable) 3/2/3

Mirror cabinet, aluminium, 1 double mirrored door, with 2 LED lighting elements, with sockets EU, with sensor switch, left door Mirror cabinet, aluminium, 1 double mirrored door, with 2 LED lighting elements, with sockets EU, with sensor switch, left door Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Door – Glass 3+3 mm 1 door with inside and outside mirrors, including handle (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 3 glass shelves (adjustable)

Mirror cabinet, aluminium, 1 double mirrored door, with 2 LED lighting elements, with sockets EU, with sensor switch, right door Mirror cabinet, aluminium, 1 double mirrored door, with 2 LED lighting elements, with sockets EU, with sensor switch, right door Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Door – Glass 3+3 mm 1 door with inside and outside mirrors, including handle (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 3 glass shelves (adjustable)

Mirror cabinet, aluminium, 1 double mirrored door, with 2 LED lighting elements, with sockets CH, without sensor switch, left door Mirror cabinet, aluminium, 1 double mirrored door, with 2 LED lighting elements, with sockets CH, without sensor switch, left door Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Door – Glass 3+3 mm 1 door with inside and outside mirrors, including handle (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 3 glass shelves (adjustable)

Mirror cabinet, aluminium, 1 double mirrored door, with 2 LED lighting elements,with sockets CH, without sensor switch, right door Mirror cabinet, aluminium, 1 double mirrored door, with 2 LED lighting elements,with sockets CH, without sensor switch, right door Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Door – Glass 3+3 mm 1 door with inside and outside mirrors, including handle (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 3 glass shelves (adjustable)

Mirror cabinet, aluminium, 1 double mirrored door, with 2 LED lighting elements, without sockets, without sensor switch, left door Mirror cabinet, aluminium, 1 double mirrored door, with 2 LED lighting elements, without sockets, without sensor switch, left door Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Door – Glass 3+3 mm 1 door with inside and outside mirrors, including handle (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 3 glass shelves (adjustable)

Mirror cabinet, aluminium, 1 double mirrored door, with 2 LED lighting elements,without sockets, without sensor switch, right door Mirror cabinet, aluminium, 1 double mirrored door, with 2 LED lighting elements,without sockets, without sensor switch, right door Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Door – Glass 3+3 mm 1 door with inside and outside mirrors, including handle (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 3 glass shelves (adjustable)

Mirror cabinet, aluminium, 1 double mirrored door, with 2 LED lighting elements, with sockets EU, with sensor switch, right door Mirror cabinet, 1 door (R), 2 lights, optional: EU or sockets CH, sensor switch, Mirror cabinet, aluminium, 1 double mirrored door, with 2 LED lighting elements, with sockets EU, with sensor switch, right door

Mirror cabinet, aluminium, 1 double mirrored door, with 2 LED lighting elements, with sockets CH, without sensor switch, left door Mirror cabinet, aluminium, 1 double mirrored door, with 2 LED lighting elements, with sockets CH, without sensor switch, left door Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Door – Glass 3+3 mm 1 door with inside and outside mirrors, including handle (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 3 glass shelves (adjustable)

Mirror cabinet, aluminium, 1 double mirrored door, with 2 LED lighting elements, with sockets CH, without sensor switch, right door Mirror cabinet, aluminium, 1 double mirrored door, with 2 LED lighting elements, with sockets CH, without sensor switch, right door, Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Door – Glass 3+3 mm 1 door with inside and outside mirrors, including handle (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 3 glass shelves (adjustable)

Mirror cabinet, aluminium, 1 double mirrored door, with 2 LED lighting elements, without socket, without sensor switch, left door Mirror cabinet, aluminium, 1 double mirrored door, with 2 LED lighting elements, without socket, without sensor switch, left door Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Door – Glass 3+3 mm 1 door with inside and outside mirrors, including handle (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 3 glass shelves (adjustable)

Mirror cabinet, aluminium, 1 double mirrored door, with 2 LED lighting elements, without socket, without sensor switch, right door Mirror cabinet, aluminium, 1 double mirrored door, with 2 LED lighting elements, without socket, without sensor switch, right door Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Door – Glass 3+3 mm 1 door with inside and outside mirrors, including handle (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 3 glass shelves (adjustable)

Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with out socket, without sensor switch, left door , Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with out socket, without sensor switch, left door

Mirror cabinet, aluminium, 2 double mirrored doors, with 2 LED lighting elements, with sockets EU, with sensor switch Mirror cabinet, aluminium, 2 double mirrored doors, with 2 LED lighting elements, with sockets EU, with sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 2 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 6 glass shelves (adjustable) 3/3

Mirror cabinet, aluminium, 2 double mirrored doors, with 2 LED lighting elements, with sockets CH, without sensor switch Mirror cabinet, aluminium, 2 double mirrored doors, with 2 LED lighting elements, with sockets CH, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 2 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 6 glass shelves (adjustable) 3/3

Mirror cabinet, aluminium, 2 double mirrored doors, with 2 LED lighting elements, without socket, without sensor switch Mirror cabinet, aluminium, 2 double mirrored doors, with 2 LED lighting elements, without socket, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 2 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 6 glass shelves (adjustable) 3/3

Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with sockets EU, with sensor switch Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with sockets EU, with sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 2 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 6 glass shelves (adjustable) 3/3

Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with sockets CH, without sensor switch Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with sockets CH, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 2 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 6 glass shelves (adjustable) 3/3

Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with out socket, without sensor switch Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with out socket, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 2 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 6 glass shelves (adjustable) 3/3

Mirror cabinet, aluminium, 2 double mirrored doors, with 2 LED lighting elements, with sockets EU, with sensor switch Mirror cabinet, aluminium, 2 double mirrored doors, with 2 LED lighting elements, with sockets EU, with sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 2 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 6 glass shelves (adjustable) 3/3

Mirror cabinet, aluminium, 2 double mirrored doors, with 2 LED lighting elements, with sockets CH, without sensor switch Mirror cabinet, aluminium, 2 double mirrored doors, with 2 LED lighting elements, with sockets CH, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 2 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 6 glass shelves (adjustable) 3/3

Mirror cabinet, aluminium, 2 double mirrored doors, with 2 LED lighting elements, without socket, without sensor switch Mirror cabinet, aluminium, 2 double mirrored doors, with 2 LED lighting elements, without socket, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 2 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 6 glass shelves (adjustable) 3/3

Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with sockets EU, with sensor switch Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with sockets EU, with sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 2 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 6 glass shelves (adjustable) 3/3

Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with sockets CH, without sensor switch Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with sockets CH, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 2 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 6 glass shelves (adjustable) 3/3

Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with out socket, without sensor switch Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with out socket, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 2 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 6 glass shelves (adjustable) 3/3

Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements, with sockets EU, with sensor switch Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements, with sockets EU, with sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 3 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 4x 14W/m, 4000 Kelvin (daylight), IP44, 230V 8 glass shelves (adjustable) 3/2/3

Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements, with sockets CH, without sensor switch Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements, with sockets CH, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 3 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 4x 14W/m, 4000 Kelvin (daylight), IP44, 230V 8 glass shelves (adjustable) 3/2/3

Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements, without socket, without sensor switch Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements, without socket, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 3 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 4x 14W/m, 4000 Kelvin (daylight), IP44, 230V 8 glass shelves (adjustable) 3/2/3

Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements and bottom ambient lighting, with sockets EU, with sensor switch Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements and bottom ambient lighting, with sockets EU, with sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 3 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 4x 14W/m, 4000 Kelvin (daylight), IP44, 230V 8 glass shelves (adjustable) 3/2/3

Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements and bottom ambient lighting, with sockets CH, without sensor switch Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements and bottom ambient lighting, with sockets CH, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 3 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 4x 14W/m, 4000 Kelvin (daylight), IP44, 230V 8 glass shelves (adjustable) 3/2/3

Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements and bottom ambient lighting, with out socket, without sensor switch Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements and bottom ambient lighting, with out socket, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 3 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 4x 14W/m, 4000 Kelvin (daylight), IP44, 230V 8 glass shelves (adjustable) 3/2/3

Aluminium mirror cabinet with vertical LED light and socket CH, without sensor switch Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements, with sockets CH, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 3 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 4x 14W/m, 4000 Kelvin (daylight), IP44, 230V 8 glass shelves (adjustable) 3/2/3

Aluminium mirror cabinet with vertical LED light, without socket, without sensor switch Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements, without socket, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 3 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 4x 14W/m, 4000 Kelvin (daylight), IP44, 230V 8 glass shelves (adjustable) 3/2/3

Aluminium mirror cabinet with vertical LED light and ambient light, with socket EU, with sensor switch Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements and bottom ambient lighting, with sockets EU, with sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 3 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 4x 14W/m, 4000 Kelvin (daylight), IP44, 230V 8 glass shelves (adjustable) 3/2/3

Aluminium mirror cabinet with vertical LED light, ambient light and socket CH without sensor switch Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements and bottom ambient lighting, with sockets CH, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 3 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 4x 14W/m, 4000 Kelvin (daylight), IP44, 230V 8 glass shelves (adjustable) 3/2/3

Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements and bottom ambient lighting, with out socket, without sensor switch Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements and bottom ambient lighting, with out socket, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 3 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 4x 14W/m, 4000 Kelvin (daylight), IP44, 230V 8 glass shelves (adjustable) 3/2/3

Batteries included, installed in the faucetSimple installation with self-calibrationSmart function for cleaning and prevention of sabotage

Bathroom sink faucet Logic sensor-controlled

The In-Wall Recessed Tork Matic® Hand Towel Dispenser with Intuition Sensor™ in beautiful stainless steel can be mounted directly into your wall.  The touch free, one-at-a-time dispensing reduces consumption and improves hygiene.  This sensor roll towel system gives guests the ultimate no-touch hand drying experience.  Part of the Tork Image Design™ line.  

Viega Eco Plus Urinal element siphon sensor technology - for pre-wall mounting please order separately: Viega Eco Plus fixing set model 8173 - suitable for equipment set s iphon sensor technology model 8352.2 Components powder-coated steel frame, sound protected urinal flushing system installation set, drain elbow DN50, shut-off, flush-through plug, Rp½ fitting connection, urinal connection fitting, self-adhesive sealing flange, fixing material for element (for floor) and ceramic, screws (self-drilling) for fixing to metal support profiles, hole Ø 11 mm for fixing in wooden frame construction, alignment help Model8152.4 (article 727 918)

Sensorflow 21 washbasin mounted tall spout with integral sensor, anti vandal laminar flow outlet, copper tube inlet, servicing valve and filter, link

Sensorflow 21 washbasin mounted tall spout with integral sensor, anti vandal laminar flow outlet, copper tube inlet, servicing valve and filter, battery

Sensorflow 21 washbasin variable temperature mixer integral sensor, link

Sensorflow 21 tubular 15cm panel mounted spout & sensor, mains

Sensorflow 21 tubular 15cm panel mounted spout & sensor, link

Sensorflow 21 compact tubular 15cm panel spout integral sensor, battery

Sensorflow 21 compact tubular 15cm panel spout integral sensor, mains

Sensorflow 21 compact tubular 15cm panel spout integral sensor, link

Sensorflow 21 compact tubular 23cm panel spout integral sensor, battery

Sensorflow 21 compact tubular 23cm panel spout integral sensor, mains

Sensorflow 21 compact tubular 23cm panel spout integral sensor, link

Sensorflow 21 compact washbasin spout integral sensor, battery

Sensorflow 21 compact washbasin spout integral sensor, link

Markwik 21 Demountable Panel Mixer, Time Flow Sensor, Detachable Spout

Markwik 21 Demountable Panel Mixer, Time Flow Sensor, Detachable Spout

CERAPLUS sensor washbasin mounted spout

CERAPLUS sensor washbasin mounted spout

CERAPLUS sensor washbasin mounted spout

CERAPLUS sensor washbasin mounted spout

The GLS-PART-CN is a sleek, surface-mount partition sensor that utilizes the dependable Cresnet® wired network for power and communications. Designed with hospitality environments in mind, this easily installed sensor uses an infrared (IR) beam to sense the position of movable partitions within a space. The IR beam’s signal strength is adjustable and features a sensing distance of up to four feet, making the GLS-PART-CN a versatile partition sensor with optimized sensing accuracy. Three LEDs on the unit provide at-a-glance information on the sensor’s state of power, communications, and partition detection. The GLS-PART-CN offers mounting options for rooms with finished or droptile ceilings. The GLS-PART-CN has plug-in outputs and built-in time delays. Also, the partition sensor easily connects via Cresnet® to a Crestron control processor to manage divisible room environments. Cresnet The GLS-PART-CN uses the dependable Cresnet wired network for communication between devices. Cresnet provides a simple solution for configuring and wiring sensors as part of any complete Crestron system. Cresnet is the communications backbone for Crestron lighting dimmers, keypads, shades, thermostats, and many other devices. This flexible 4-wire bus provides data communications and 24 Volts DC power for all of the devices on the Cresnet network. Versatile Installation The GLS-PART-CN has a white finish and can mount directly into finished ceilings. For droptile ceilings, the GLS-PART-CN installs into a 1-gang, 3-1/2 inch deep electrical box. In both instances, a decorator-style faceplate[1] can be used to match the GLS-PART-CN with the color of the room. Only about 20 mm of the GLS-PART-CN is visible after installation, making it an unobtrusive addition to a room. Digital Output This sleek sensor delivers unparalleled versatility through an additional output on the terminal block, which can be used as an alternate method of integration with a Crestron Control System® or other system. The 5th pin of the Cresnet connector provides either a 24 Volt, 10 mA output or a closure to ground, perfect for connection with a Versiport or digital input port. Notes: 1. Sold separately.

<p>Crestron® occupancy sensors and daylight sensors offer a powerful, cost-saving solution for reducing energy consumption and enhancing system functionality. As part of a complete Crestron system, they can be used to enable automation of lighting, shading, HVAC, and AV equipment in a conference room, classroom, office, hallway, or other space. Using Crestron sensors, room lighting can automatically turn on when the room is occupied, turn off when it is vacant, and dim to a lower level when there is sufficient natural daylight from windows and skylights. Sensors can also be used to enhance the capabilities of a room scheduling, asset management, or energy monitoring solution through integration with the Crestron Fusion® Enterprise Management service.<br>The GLS-OIRLCL-C-CN serves dual functions as a passive infrared occupancy sensor and closed-loop photocell daylight sensor (photosensor). It can also operate in vacancy-only mode, and is designed to cover an area up to 450 square feet or 42 square meters. Miniaturized construction affords a nearly hidden appearance when installed in a drywall or drop-tile ceiling. It communicates with a Crestron control system via the Cresnet® network. Setup and configuration is accomplished using Crestron Toolbox software or the optional IR remote (model GLS-REMOTE-ODT/OIR, sold separately).<br>Passive Infrared Occupancy Sensing<br>Passive infrared (PIR) technology employs a highly sensitive specialized lens that divides the field-of-view into 64 detection zones. The sensor detects motion when a warm body passes between zones, achieving dependable motion detection with superior immunity to false triggering from vibrations, inanimate objects, or movement in an adjacent corridor. The detection sensitivity can be set to one of three levels for optimum performance. Timeout can be set to one of six settings ranging from 30 seconds to 30 minutes, preventing the sensor from turning off lights or reporting vacancy during moments when the room is occupied but no one is moving. In addition, a “walk-through” mode (Short Timeout) can be enabled to temporarily override the Timeout setting on occasions when the room is only occupied briefly for 90 seconds or less.<br>Vacancy Only Mode with Grace Occupancy<br>The GLS-OIRLCL-C-CN can be configured to sense vacancy only. In this mode, lighting and other equipment must be turned on manually but shuts off automatically after the room is vacated. The “grace occupancy” feature ensures that if the lights turn off while someone is in the room, they can be turned back on by simply waving a hand within a 15 second grace period.<br><br></p><p><strong>Daylight Sensing<br></strong>Its built-in photocell enables the GLS-OIRLCL-C-CN to function as an closed-loop photosensor as part of a complete daylight harvesting solution. By monitoring the ambient light level in the room, electrical lighting can be dimmed automatically when sufficient natural daylight is available. Daylight harvesting enables organizations to improve energy efficiency by taking advantage of natural sunlight from windows and skylights while maintaining consistent lighting levels throughout the day for a more comfortable workspace.<br><br></p><p><strong>Room Usage Monitoring<br></strong>Through integration with the Crestron Fusion Enterprise Management service, occupancy sensors can be leveraged to log room usage based on occupancy, and to maximize efficiency for room scheduling by reporting if a room is occupied or vacant. In the event no one has shown up for a scheduled meeting, the meeting can be cancelled automatically, making the room available to others.<br><br></p><p><strong>Cresnet®<br></strong>The GLS-OIRLCL-C-CN interfaces with a Crestron control system via Cresnet. Cresnet is a simple 4-wire network bus that provides the communications backbone for a system of Crestron sensors, lighting dimmers and switches, motorized shades, thermostats, keypads, and other devices. The GLS-OIRLCL-C-CN is also powered by 24 Volts DC from the Cresnet network.<br><br></p><p>Ceiling Flush Mount Installation<br>The GLS-OIRLCL-C-CN installs easily in a typical drywall or drop-tile ceiling. Simply drill a one-inch (25 mm) diameter hole and insert the sensor. Integrated compression clips hold the sensor in place. Once installed, it achieves a very discreet and flush appearance against a white ceiling.<br><br></p><p>Note 1: The motion detection pattern is rectangular. The sensor should be positioned and oriented accordingly to achieve the desired performance within the space.<br>Note 2: Some functions described in this spec sheet may require custom commissioning of the control system by an authorized Crestron system programmer.<br></p><p><br></p><p><strong>Key Features</strong><br></p><ul><li>Flush ceiling mount occupancy or vacancy sensor</li><li>Passive infrared (PIR) motion detection</li><li>Fully digital circuitry, highly accurate and reliable performance</li><li>450 square feet (42 m2) rectangular detection pattern</li><li>Vacancy-only mode with grace occupancy</li><li>Adjustable sensitivity and timeout</li><li>Short timeout “walk-through” mode</li><li>Built-in closed-loop photosensor for daylight harvesting</li><li>Monitors ambient light level from natural and artificial light sources</li><li>Enables automation of lighting, shading, HVAC, and AV equipment</li><li>Reduces wasteful energy consumption</li><li>Maintains consistent lighting levels</li><li>Reports room usage to Crestron Fusion®</li><li>Miniaturized construction for a nearly hidden appearance</li><li>Installs quickly in a one-inch (25 mm) diameter hole</li><li>IP64 dust-proof and splash-proof</li><li>Cresnet® wired control system interface</li><li>24 Volts DC powered via Cresnet</li><li>Color-coded flying lead connections</li><li>Easy setup via software or IR remote (sold separately)</li></ul><p><span></span></p><p></p>

Electronic sensor for urinal

Sensor with built-in sensor batteries - Batteries: 6 V

Integrated detection valve mains - Sector: 220 V / 12 V

Sensor with built-in battery detection - Temperature control lever on the side

Faucet with built-in sensor - Side temperature control knob

<p></p><p>Just under 2 inch diameter, featuring an immaculate, sleek, and modern white casing, you’ll fall in love with this motion sensor at first sight. <br></p> <p>Battery-powered and completely wireless, the FIBARO Motion Sensor features a smart bracket with grip that allows it to be affixed almost anywhere – even on a wall or ceiling. The sensor’s location can be changed at any time for ultimate comfort and convenience.</p><p></p>

Tap with different types.

Freestanding bathtub made of SENTEC solid surface material, with not removable panels Overflow slot and tap bank at feet side With pre-installed lifting system to move the bathtub aside in case of maintenance, with floor fixation With pre-installed overflow and siphon with click-clack function With waste cover made of SENTEC solid surface Charge 616 – without whirl system, with sensor control for illuminated overflow slot Bathtub with whirl system, with sensor control: Charge 627 – Whirlpool with air massage, illuminated overflow slot and mist

Bathtub made of SENTEC solid surface material, casted for the right corner, with not removable L-panel left With overflow slot at front side and tap bank at opposite side With aluminium frame and floor fixation With pre-installed overflow and siphon with click-clack function With waste cover made of SENTEC solid surface Charge 616 – without whirl system, with sensor control for illuminated overflow slot Bathtub with whirl system, with sensor control: Charge 627 – Whirlpool with air massage, illuminated overflow slot and mist

Freestanding bathtub made of SENTEC solid surface material, with not removable panels With overflow slot at long side and tap bank at opposite side With pre-installed lifting system to move the bathtub aside in case of maintenance, with floor fixation With pre-installed overflow and siphon with click-clack function With waste cover made of SENTEC solid surface Charge 616 – without whirl system, with sensor control for illuminated overflow slot Bathtub with whirl system, with sensor control: Charge 627 – Whirlpool with air massage, illuminated overflow slot and mist

Bathtub made of SENTEC solid surface material, casted Drop-in version for the left corner, without panel With overflow slot at front side and tap bank at opposite side With aluminium frame and floor fixation With pre-installed overflow and siphon with click-clack function With waste cover made of SENTEC solid surface Charge 616 – without whirl system, with sensor control for illuminated overflow slot Bathtub with whirl system, with sensor control: Charge 627 – Whirlpool with air massage, illuminated overflow slot and mist

Bathtub made of SENTEC solid surface material, casted Drop-in version for the right corner, without panel With overflow slot at front side and tap bank at opposite side With aluminium frame and floor fixation With pre-installed overflow and siphon with click-clack function With waste cover made of SENTEC solid surface Charge 616 – without whirl system, with sensor control for illuminated overflow slot Bathtub with whirl system, with sensor control: Charge 627 – Whirlpool with air massage, illuminated overflow slot and mist

Freestanding bathtub made of SENTEC solid surface material, with not removable panels With overflow slot at long side and tap bank at opposite side With pre-installed lifting system to move the bathtub aside in case of maintenance, with floor fixation With pre-installed overflow and siphon with click-clack function With waste cover made of SENTEC solid surface Charge 616 – without whirl system, with sensor control for illuminated overflow slot Bathtub with whirl system, with sensor control: Charge 627 – Whirlpool with air massage, illuminated overflow slot and mist

Bathtub made of SENTEC solid surface material, casted for the left corner, with not removable L-panel right With overflow slot at front side and tap bank at opposite side With aluminium frame and floor fixation With pre-installed overflow and siphon with click-clack function With waste cover made of SENTEC solid surface Charge 616 – without whirl system, with sensor control for illuminated overflow slot Bathtub with whirl system, with sensor control: Charge 627 – Whirlpool with air massage, illuminated overflow slot and mist

Mini-sized, electronically controlled instantaneous water heater for energy-efficient and comfortable hot water supply at a handwash basin (3,5 - 6,5 kW). • Touch key control panel or control vai IPad (CLAGE Smart Control) • optionally supplied with or without plug (3,5 kW) • suitable for pre-wall installation • immediately hot water at any time • Energy efficiency class A (from Sept. 2015) • MCX Blue with single-lever washbasin tap • MBX Lumino with touch-free sensor tap

Mini-sized, electronically controlled instantaneous water heater with single-lever washbasin tap for energy-efficient and comfortable hot water supply at a handwash basin (3,5 kW). • Touch key control panel or control vai IPad (CLAGE Smart Control) • optionally supplied with or without plug (3,5 kW) • suitable for pre-wall installation • immediately hot water at any time • Energy efficiency class A (from Sept. 2015) • MCX SMARTRONIC® • MBX Lumino with touch-free sensor tap

Mini-sized, electronically controlled instantaneous water heater with touch-free sensor tap for energy-efficient and comfortable hot water supply at a handwash basin (3,5/ 6,5 kW). • The maximum power of the instantaneous water heater will be set by a lever at the tap • optionally supplied with or without plug (3,5 kW) • suitable for pre-wall installation • immediately hot water at any time • Energy efficiency class A (from Sept. 2015) • MCX Blue with single-lever washbasin tap • MCX SMARTRONIC®

Electronic vitreous china urinal with integrated sensor powered by batteries

Volumetric infusion pump. Pump is self-regulating with automatic sensor and adjustable rate. Equipped with visual and audible alarms and up to 10 hour capacity battery. For the administration of a wide variety of therapeutic agents where precise control is required. Unit provides individual control to IV lines simultaneously.

AVENAR detector 4000 is a range of automatic fire detectors featuring a superb accuracy and swiftness in detection. The range includes single sensor, double sensor and multi-sensor versions. The versions with two optical sensors are able to detect the lightest smoke. All versions monitor the environment for electromagnetic influence for fast root-cause analysis. Certified according to EN54 standards.

Color television. Unit consists of a color receiver/monitor, with remote control, full off-air channel capability, automatic light sensor, broadcast stereo sound and automatic color balance. Unit is HD with a minimum of 720p resolution.

The infusion syringe pump ensures highly accurate volume delivery and consistent flow for small volumes (<50 ml) of pharmacologic agents or thick feeding solutions. It shall be small, lightweight construction, making it transportable. Shall have menu-driven programming capable of flow rates (e.g. 0.1 or 1.0 mL/hr) that are intended for long-term bedside use and/or critical care patient transport, plunger positioning sensor, LCD display for easy viewing, volume limit programming to serve as a convenient cue of volume or dose delivery completion and multiple delivery modes for all applications requiring precisely controlled infusion rates. The infusion pump shall have automatic syringe size sensing which will give the flexibility to accept a wide range of syringe sizes (up to 60 mL) from different manufacturers. Shall be battery powered/AC adapter.

Volumetric infusion pump. Pump is self-regulating with automatic sensor and adjustable rate. Unit is equipped with audible and visual alarms. The battery is rated for 5 hours at 125 ml/hr minimal. Pump is used for the administration of a wide variety of therapeutic agents where precise control is required.

Automated pill, capsule and tablet counter. The unit consists of an array of holding cells each of which dispenses a set number of pills into a prescription bottle. The counter has a control unit to start and stop pill flow. Each cell has a straight line pill flow pattern, a photoelectric counter which signals the controller, a count range from 1 to 10,000 and can dispense products at a rate up to 600 tablets per minute. A built-in sensor indicates dust build up or misalignment of the photoelectric counter. Each cell has easily removable bins and mechanisms for cleaning and refilling. Each cell features an LED display and there are varying sizes of cells for handling more frequently issued or physically larger drugs. Many different, including custom, array of sizes and configurations are possible and the final design depends on the facility layout and pharmacy practice preferences. Individual cells can also be equipped with coded locks. The entire array can be interfaced with a pharmacy computer system. These units are commonly leased rather than sold because of maintenance requirements.

Wall mounted, slab type, vitreous china, lavatory (approximately 7 x 15 x 10 inches) with faucet holes on 4 inch centers; electronic sensor operated, goose neck spout and grid strainer. It shall be suitable for use in clinics, offices and patient care areas.

Dental imaging system. Used in intra oral x-ray imaging. Computer-aided to enhance image. Storage and printing capabilities for the image. System includes, CPU, CRT, active surface sensor, 120MB HD storage, thermal printer, mobile workstation, and is compatible with any intra oral x-ray system.

The perfect external door. The Gilgen SLX-M sliding-door drive unit is a universally applicable drive system with the very latest functions. It is designed to offer guaranteed, reliable functioning in a wide range of highly demanding applications. It also offers elegant good looks, with its sensor components housed in the drive case. The Gilgen <green wings> PST profile system is the new name for a high performance thermal barrier with a slimline visible width. Heating and air conditioning costs are drastically reduced, which translates into the system's rapid return on investment. The range is completed with optional extras such as a drained bottom guide-way or automatic multi-point locking.

Bathtub made of sanitary acrylic of 4-5 mm Semi-recessed version, with front panel Only to combine with furniture panel With aluminium frame Charge 000 – without whirl system, without waste and overflow Bathtub with whirl system, with sensor control: Charge 675 – Whirlpool with air and hydro massage and LED light Charge 695 – Whirlpool with air and hydro massage, disinfection system and LED light Bathtub with whirl system, with remote control: Charge 056 – Whirlpool with surround sound system, air and hydro massage and disinfection system, hydro heating and LED light Charge 057 – Whirlpool with surround sound system, air and hydro massage and disinfection system, hydro heating, LED light and cold mist function

Freestanding bathtub made of solid surface Sentec material, with hidden overflow incl. click-clack waste Charge 000 – without whirl system Bathtub without whirl system, with sensor control: Charge 615 – bathtub with LED light Bathtub with whirl system, with sensor control: Charge 605 – Whirlpool with air massage Charge 625 – Whirlpool with air massage and LED light

Additional horizontal LED light, with sensor switch integrated in the mirror aluminium frame (bottom side)1x 12W, 4000 Kelvin (daylight), IP44, 230V

Additional horizontal LED light, with sensor switch integrated in the mirror aluminium frame (bottom side)1x 12W, 4000 Kelvin (daylight), IP44, 230V

Additional horizontal LED light, with sensor switch integrated in the mirror aluminium frame (bottom side)1x 12W, 4000 Kelvin (daylight), IP44, 230V

Additional horizontal LED light, with sensor switch integrated in the mirror aluminium frame (bottom side)1x 12W, 4000 Kelvin (daylight), IP44, 230V

Additional horizontal LED light, with sensor switch integrated in the mirror aluminium frame (bottom side)1x 15W, 4000 Kelvin (daylight), IP44, 230V

Additional horizontal LED light, with sensor switch integrated in the mirror aluminium frame (bottom side)1x 15W, 4000 Kelvin (daylight), IP44, 230V

Additional horizontal LED light, with sensor switch integrated in the mirror aluminium frame (bottom side)1x 20W, 4000 Kelvin (daylight), IP44, 230V

Additional horizontal LED light, with sensor switch integrated in the mirror aluminium frame (bottom side)1x 20W, 4000 Kelvin (daylight), IP44, 230V

Additional horizontal LED light, with sensor switch integrated in the mirror aluminium frame (bottom side)1x 30W, 4000 Kelvin (daylight), IP44, 230V

Additional horizontal LED light, with sensor switch integrated in the mirror aluminium frame (bottom side)1x 30W, 4000 Kelvin (daylight), IP44, 230V

Additional horizontal LED, with sensor switch integrated in the mirror aluminium frame (bottom side), Watt depending on length, 4000 Kelvin (daylight), IP44, 230V

Additional vertical LED light, with sensor switch integrated in the mirror aluminium frame (bottom side)1x 12W, 4000 Kelvin (daylight), IP44, 230V

Roto Designo R6 RotoTronic centre-pivot roof window (timber) with safety and thermal insulation glazing in natural timber with thermal insulating block. Centre-pivot roof window with a central swing axis. Ideally suitable as a combination element for Roto top-hung roof windows. The Roto centre-pivot roof window can be used for a roof pitch from 15° to 90°. Gaskets: Double gasket system all-round on the sash. Frame cover profile with additional gasket function outside. External covers: Made of aluminium (anthracite-metallic), plug-in installation system without exposed screw-fixings. Chain drive, control centre and rain sensor preassembled for plug-in.

Roto Designo R4 RotoTronic centre-pivot roof window (PVC) with safety and thermal insulation glazing in white PVC. The Roto centre-pivot roof window can be used for a roof pitch from 15° to 85°. Centre-pivot roof window with a central swing axis. Gaskets: Single or double gasket system all-round on the sash. Frame cover profile with additional gasket function outside. External covers made of aluminium (anthracite-metallic). Chain drive, control system and rain sensor preassembled for plug-in.

Roto Designo R4 RotoTronic centre-pivot roof window (timber) with safety and thermal insulation glazing in natural timber. The Roto centre-pivot roof window can be used for a roof pitch from 15° to 85°. Centre-pivot roof window with a central swing axis. Gaskets: Single or double gasket system all-round on the sash. Frame cover profile with additional gasket function outside. External covers made of aluminium (anthracite-metallic). Chain drive, control system and rain sensor preassembled for plug-in.

Roto Designo R6 RotoTronic centre-pivot roof window (PVC) with safety and thermal insulation glazing in white PVC with thermal insulating block. Centre-pivot roof window with a central swing axis. Ideally suitable as a combination element for Roto top-hung roof windows. The Roto centre-pivot roof window can be used for a roof pitch from 15° to 90°. Gaskets: Double gasket system all-round on the sash. Frame cover profile with additional gasket function outside. External covers: Made of aluminium (anthracite-metallic), plug-in installation system without exposed screw-fixings. Chain drive, control centre and rain sensor preassembled for plug-in.

RotoComfort i8 electrical top-hung roof window (PVC) with safety and thermal insulation glazing in white PVC with thermal insulating block. The Roto i8 top-hung roof window can be used for a roof-pitch from 20° to 65°. Electrical top-hung roof window with an opening angle of 45° and semi-automatic cleaning position. Four point central locking system for secure locking, even gasket compression and increased burglar-resistant security. Gaskets: Double gasket system all-round on the sash. Frame cover profile with additional gasket function outside. Delivery content radio-controlled version preassembled ex works: 5 meters connection cable with 230V power plug, concealed motor and locking drive unit, rain sensor to insert into the flashing, integrated control system and triple radio receiver for additional connection of an exterior and an interior sun-screening drive unit, cabling and cable opening for interior sun-screening prepared ex works. Easy connection without electrician, maximal ease of use with plug & play.

Electronic wash-basin mixer. 1/2” flexible connection hose. Sensor activated.

Baier sliding windows are used whenever one seeks an increase in comfort, aesthetics, and functionality. Functionality that moves. Baier sliding windows offer flexibility and the maximum level of security. The windows’ developments allow for the necessary comfort and its “automatic commercial success”. Baier measures up to all requirements. It doesn’t matter whether Baier is furnishing a network of bakeries with new, practical, and cost-effective sliding windows or fulfilling the specific wishes of a private homeowner. The entire expert knowledge of our metal construction lies in the development of innovative sliding windows, no matter what size. We also pay equal attention to individuality, ease of cleaning, and safety. Along with electrical automatic drivers, our experts also design a patented anti-drop device that would become effective if the carrier wire ever broke. But, a problem like that is out of the question, and you have our dependable maintenance service to thank for that. You can trust us in moving situations. [LIST] Ergonomic sliding windows for commercial use, such as for sidewalk sale Elegant special solutions for private living area Horizontal and vertical constructions Comfortable service, manual, at the push of a button or motion sensor For outside and inside Patented security system Made to measure in all desired sizes Available in all desired colors Made with shatterproof and insulating glass [/LIST]

The ideal combination for a wide range of applications The Gilgen SLX-M sliding door drive unit is a universally applicable drive system with state-of-the-art functions. It is designed to offer guaranteed, reliable functioning in a wide range of highly demanding applications. The elegantly designed sensor system is built into the header profile.

Ditec DAB105 is an electromechanical servo-assisted automation system for swing doors with spring, with 24 Vdc gear motor and encoder-managed kinematics, for safe and reliable management of door movement in every situation. The silent operation and clean, elegant look make Ditec DAB105 the preferred choice for swing doors in the commercial and public sector applications. The powerful gear motor easily moves wings up to 200 kg of weight or over 1.2 m of width. Ditec DAB105 can work in both push or pull mode with dedicated arms connecting the opener to the door panel. The numerous operation modes (Low Energy, PUSH&GO, Power Assist, sensor control, push-button control, etc.), as well as the possibility to easily manage double-wing swing opening make Ditec DAB105 an ideal solution that easily adapts to any requirement. A wide choice of accessories and control devices completes the product range. Ditec DAB105 fully complies with all European directives including EN 16005.

A new generation of sensor operated mixers. All technical parts integrated in the mixer body for easy maintenance. Programmable functions such as hygiene flush, rinsing times and cleaning mode. Chrome. 16410000 Battery operation RSK 8553492 NRF 4300059 LVI 6158041 VVS 704369104 16411000 Mains operation RSK 8553578 NRF 4300974 LVI 6158056 VVS 704369504 16415000 For BMS-systems RSK 8553493 NRF 4300061 LVI 6158042 VVS 704369304 FM Mattsson 9000E Tronic is a new generation of sensor operated mixers in Sweden. All technical parts are integrated in the mixer body for easy maintenance. The temperature is easily set by means of a lever at the side of the mixer. The lever can be fixed in order to secure the mixer against scalding or alternatively remove the lever if you need only a fixed temperature. There is also a programmable function for hygienic flush that prevents the water to be stagnant too long and thereby prevents bacteria to grow.

A new generation of sensor operated mixers. All technical parts integrated in the mixer body for easy maintenance. Programmable functions such as hygiene flush, rinsing times and cleaning mode. Chrome. 16400000 Battery operation RSK 8553490 NRF 4300057 LVI 6158043 VVS 704368104 16401000 Mains operation RSK 8553577 NRF 4300973 LVI 6158055 VVS 704368504 16405000 For BMS-systems RSK 8553491 NRF 4300058 LVI 6158044 VVS 704368304 FM Mattsson 9000E Tronic is a new generation of sensor operated mixers in Sweden. All technical parts are integrated in the mixer body for easy maintenance. The temperature is easily set by means of a lever at the side of the mixer. The lever can be fixed in order to secure the mixer against scalding or alternatively remove the lever if you need only a fixed temperature. There is also a programmable function for hygienic flush that prevents the water to be stagnant too long and thereby prevents bacteria to grow.

A new generation of sensor operated mixers. All technical parts integrated in the mixer body for easy maintenance. Programmable functions such as hygiene flush, rinsing times and cleaning mode. Chrome. RSK 8553494 NRF 4300062 LVI 6158045 VVS 704367004 FM Mattsson 9000E Tronic is a new generation of sensor operated mixers in Sweden. All technical parts are integrated in the mixer body for easy maintenance. The temperature is easily set by means of a lever at the side of the mixer. The lever can be fixed in order to secure the mixer against scalding or alternatively remove the lever if you need only a fixed temperature. There is also a programmable function for hygienic flush that prevents the water to be stagnant too long and thereby prevents bacteria to grow.

A new generation of sensor operated mixers. Perfect for hospitals, schools and other public buildings. All technical parts integrated in the mixer body for easy maintenance. Programmable functions such as hygiene flush, rinsing times and cleaning mode. Chrome. 160 c/c. Lead free. RSK 8430505 16501500 150 c/c RSK 8430515 NRF 4300004 VVS 704365104

A new generation of sensor operated mixers. Perfect for hospitals, pre-surgery washings etc. All technical parts integrated in the mixer body for easy maintenance. Programmable functions such as hygiene flush, rinsing times and cleaning mode. Chrome. 160 c/c. RSK 8340507 FMM 16601500 150 c/c RSK 8430514 NRF 4300005 VVS 704366104

A new generation of sensor operated mixers. Perfect for public shower areas, camping sites etc. All technical parts integrated in the mixer body for easy maintenance. Programmable functions such as hygiene flush, rinsing times and cleaning mode. Chrome. 160 c/c. RSK 8359096 16801500 150 c/c RSK 8359102 NRF 4301838 VVS 704366204

A new generation of sensor operated mixers. Perfect for public shower areas, camping sites etc. All technical parts integrated in the mixer body for easy maintenance. Programmable functions such as hygiene flush, rinsing times and cleaning mode. Chrome. 160 c/c. RSK 8359097 16811500 150 c/c RSK 8359103 NRF 4301839 VVS 704366304

A refined blend of design and innovation combines advanced technology, such as the Sensor Cooking technology that ensures precise results and unrivalled flavours, with a hard-wearing, professional design complete with Easy-to-Clean stainless steel finishes. With seven special functions (such as crisp, jet defrost and 30-second jet start) and six traditional functions (including forced air), the oven guarantees to cook perfectly, quickly and evenly while retaining all of the food’s original flavours and nutrients.

This 40-litre microwave oven can be seen in smart functions, such as jet defrost and rapid preheat, Easy-to-Clean stainless steel surfaces and a hard-wearing, professional design. The KitchenAid 45 cm microwave & grill oven has the <b>Sensor Cooking Technology</b>. The ideal ally, always ready to enhance the flavour of your dishes. Simply select the type of dish you want to cook and the sensor will automatically adjust the microwave’s power level and cooking time actively throughout the cooking process.<br>You can also benefit from the <b>Prosteam technology</b>. The perfect way to steam food in KitchenAid microwave ovens. The KitchenAid oven automatically adjusts to direct its low-level microwaves into the Steamer, an included ProSteam technology dish, so you can explore all the healthy opportunities to cook an outstanding steamed salmon with black bean sauce. The state-of-the-art 3D microwave system guarantees perfect, even and fast cooking. This model is super spacious and has a large 40 cm turntable. It also offers:<br>- 3 Special functions<br>- 6 Traditional functions (jet start, 2 grill, rapid preheat, forced air, forced air combi)<br>- Quick defrost<br>- Quick start

Two operating modes in one device A compact device with a twin function: the new movement / presence detector for automatic switching of the lighting, dependent on brightness and movement. It is persuasive due to its excellent detection properties (360° detection range) at mounting heights up to six metres. The movement / presence detector has three independent PIR sensors for movement detection. Each of these sensors is assigned to an individually activated range (each with a detection angle of 120°). In addition the detection range can be considerably extended by grouping up to five devices. It is therefore possible to adapt the device to the room conditions or to the specific application. Due to the integrated brightness sensor, the device can also be used as a twilight switch.

Excel Dryer is proud to announce a breakthrough in hand drying technology. The XLERATOR hand dryers deliver 3 times faster hand drying power. A user's hands will be thoroughly dry in only 10 to 15 seconds. The XLERATOR hand dryer is the result of a two-year research project, in which we studied every detail of the hand-drying process, with countless hours of field testing, listening to what users had to say, and, as a result, developed the patented technology behind the best hand dryer in the business. The benefits of the XLERATOR include:<br><ul><li>FAST! Dry hands completely in 10-15 Seconds</li><li>Uses 80% Less Energy than other hand dryers</li><li>95% Cost Savings vs. Paper Towels</li><li>GREENSPEC® Listed and Helps Qualify for LEED® Credits</li><li>Promotes Hygiene (automatic sensor activated)</li><li>Source Reduction Alternative</li></ul><br><br>Specification Tools<br><br>Product Images<br><br><br>Click diagram for enlargement.<br><br><b>Construction</b><br><br><ol><li>Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts.</li><li>Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring.</li><li>All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements.</li><li>Entire mechanism shall be internally grounded.</li></ol><p>   </p><br><br><b>Mechanism</b><br><br><ol><li>Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet).</li><li>Hand dryer heating element (970 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet).</li><li>Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if hands are not removed.</li></ol><br><br><b>Limited Warranty</b><br>The hand dryer shall be guaranteed to be free from defects for a period of five (5) years. Warranty shall include factory performed labor as well as the repair or exchange of defective parts, at manufacturer's option.

Excel Dryer is proud to announce a breakthrough in hand drying technology. The XLERATOR hand dryers deliver 3 times faster hand drying power. A user's hands will be thoroughly dry in only 10 to 15 seconds. The XLERATOR hand dryer is the result of a two-year research project, in which we studied every detail of the hand-drying process, with countless hours of field testing, listening to what users had to say, and, as a result, developed the patented technology behind the best hand dryer in the business. The benefits of the XLERATOR include:<br><ul><li>FAST! Dry hands completely in 10-15 Seconds</li><li>Uses 80% Less Energy than other hand dryers</li><li>95% Cost Savings vs. Paper Towels</li><li>GREENSPEC® Listed and Helps Qualify for LEED® Credits</li><li>Promotes Hygiene (automatic sensor activated)</li><li>Source Reduction Alternative</li></ul><br><br>Specification Tools<br><br>Product Images<br><br><br>Click diagram for enlargement.<br><br><b>Construction</b><br><br><ol><li>Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts.</li><li>Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring.</li><li>All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements.</li><li>Entire mechanism shall be internally grounded.</li></ol><p>   </p><br><br><b>Mechanism</b><br><br><ol><li>Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet).</li><li>Hand dryer heating element (970 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet).</li><li>Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if hands are not removed.</li></ol><br><br><b>Limited Warranty</b><br>The hand dryer shall be guaranteed to be free from defects for a period of five (5) years. Warranty shall include factory performed labor as well as the repair or exchange of defective parts, at manufacturer's option.

Excel Dryer is proud to announce a breakthrough in hand drying technology. The XLERATOR hand dryers deliver 3 times faster hand drying power. A user's hands will be thoroughly dry in only 10 to 15 seconds. The XLERATOR hand dryer is the result of a two-year research project, in which we studied every detail of the hand-drying process, with countless hours of field testing, listening to what users had to say, and, as a result, developed the patented technology behind the best hand dryer in the business. The benefits of the XLERATOR include:<br><ul><li>FAST! Dry hands completely in 10-15 Seconds</li><li>Uses 80% Less Energy than other hand dryers</li><li>95% Cost Savings vs. Paper Towels</li><li>GREENSPEC® Listed and Helps Qualify for LEED® Credits</li><li>Promotes Hygiene (automatic sensor activated)</li><li>Source Reduction Alternative</li></ul><br><br>Specification Tools<br><br>Product Images<br><br><br>Click diagram for enlargement.<br><br><b>Construction</b><br><br><ol><li>Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts.</li><li>Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring.</li><li>All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements.</li><li>Entire mechanism shall be internally grounded.</li></ol><p>   </p><br><br><b>Mechanism</b><br><br><ol><li>Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet).</li><li>Hand dryer heating element (970 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet).</li><li>Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if hands are not removed.</li></ol><br><br><b>Limited Warranty</b><br>The hand dryer shall be guaranteed to be free from defects for a period of five (5) years. Warranty shall include factory performed labor as well as the repair or exchange of defective parts, at manufacturer's option.

Deck-mounted electronic basin mixer : Independent IP65 electronic control unit. 230/12V mains supply with transformer. Flow rate pre-set at 3 lpm at 3 bar, can be adjusted 1.5 - 6 lpm. Scale-resistant flow straightener. Adjustable duty flush (pre-set flush ~60 sec. every 24hr after last use). Active, infrared presence detection, sensor at the end of the spout optimises detection. Chrome-plated brass body. PEX flexibles with filters and solenoid valves M3/8". Fixing reinforced by 2 stainless steel rods. Anti-blocking safety. Spout with smooth interior and low volume of water (reduces bacterial development). Side temperature control with adjustable maximum temperature limiter. 10-year warranty.

Deck-mounted electronic basin tap: Battery-operated with integrated 223 6V Lithium battery. Reduced-stagnation solenoid valve and electronic unit integrated into the body of the tap. Flow rate pre-set at 3 lpm at 3 bar, can be adjusted 1.5 - 6 lpm. Scale-resistant flow straightener. Duty flush (~60 sec. every 24hr after last use). Active, infrared presence detection, sensor at the end of the spout optimises detection. Chrome-plated solid brass body. Cap fixed in place by 2 concealed screws. PEX flexible with stopcock and filter. Fixing reinforced by 2 stainless steel rods. Anti-blocking security. 10-year warranty.

Deck-mounted electronic basin tap : Battery-operated with integrated 223 6V Lithium battery. Reduced-stagnation solenoid valve and electronic unit integrated into the body of the tap. Flow rate pre-set at 3 lpm at 3 bar, can be adjusted 1.5 - 6 lpm. Scale-resistant flow straightener. Duty flush (~60 sec. every 24hr after the last use). Active infrared movement detection, sensor at the end of the spout optimises detection. Chrome-plated solid brass body. Cap fixed in place by 2 concealed screws. PEX flexibles F3/8" with filter. Fixing reinforced by 2 stainless steel rods. Anti-blocking security. 10-year warranty.

Electronic valve for individual urinal : Battery-operated with integrated 223 6V Lithium battery. Reduced-stagnation solenoid valve and electronic unit integrated into the body of the valve. Shockproof infrared presence detection sensor. Detection delay is 10 sec. 3 programmes (rinsing volume can be adjusted according to the type of urinal). High-frequency mode (DELABIE exclusivity) : - short rinse after each user, - complementary rinse after busy period. Hygienic duty flush, every 24hr after last use, prevents vacuums in the siphon. Flow rate 0.25 l/sec. at 3 bar, can be adjusted. Stopcock and flow rate adjuster. One-piece chrome-plated metal body. M½" connection. Straight for in-line supply, outlet M½". 10-year warranty.

Deck-mounted electronic basin mixer: 230/12V recessed mains supply. Reduced-stagnation solenoid valve and electronic unit integratedinto the body of the mixer. Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm. Scale-resistant flow straightener. Duty flush (~60 sec. every 24hr after last use). Active, infrared presence detection, sensor at the end of the spout optimises detection. Chrome-plated solid brass body. Cap fixed in place by 2 concealed screws. PEX flexibles F3/8" with stopcocks, filters and non-return valves. Fixing reinforced by 2 stainless steel rods. Anti-blocking security. Side temperature control with adjustable maximum temperature limiter. 10-year warranty.

Deck-mounted electronic basin mixer : 230/12V plug-in mains supply. Reduced-stagnation solenoid valve and electronic unit integrated into the body of the mixer. Flow rate pre-set at 3 lpm at 3 bar, can be adjusted 1.5 - 6 lpm. Scale-resistant flow straightener. Duty flush (~60 sec. every 24hr after the last use). Active infrared presence detection, sensor at the end of the spout optimises detection. Chrome-plated solid brass body. Cap fixed in place by 2 concealed screws. PEX flexibles F3/8" with stopcocks, filters and non-return valves. Fixing reinforced by 2 stainless steel rods. Anti-blocking security. Standard side temperature control lever with adjustable maximum temperature limiter. 10-year warranty.

Deck-mounted electronic basin mixer : Battery-operated with integrated 223 6V Lithium battery. Reduced-stagnation solenoid valve and electronic unit integrated into the body of the mixer. Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 - 6 lpm. Scale-resistant flow straightener. Duty flush (~60 sec. every 24hr after the last use). Active infrared presence detection sensor at the end of the spout optimises detection. Chrome-plated solid brass body. Cap fixed in place by 2 concealed screws. PEX flexibles F3/8" with stopcocks, filters and non-return valves. Fixing reinforced by 2 stainless steel rods. Anti-blocking security. Side temperature control with adjustable maximum temperature limiter. 10-year warranty.

Deck-mounted electronic basin mixer : Battery-operated with integrated 223 6V Lithium battery. Reduced-stagnation solenoid valve and electronic unit integrated into the body of the mixer. Flow rate pre-set at 3 lpm at 3 bar, can be adjusted 1.5 - 6 lpm. Scale-resistant flow straightener. Duty flush (~60 sec. every 24hr after the last use). Active infrared presence detection, sensor at the end of the spout optimises detection. Chrome-plated solid brass body. Cap fixed in place by 2 concealed screws. PEX flexibles F⅜" with filters and non-return valves. Fixing reinforced by 2 stainless steel rods. Anti-blocking security. Side temperature control with adjustable maximum temperature limiter. 10-year warranty.

Deck-mounted electronic basin mixer : Battery-operated with integrated 223 6V Lithium battery. Reduced-stagnation solenoid valve and electronic unit integrated into the body of the mixer. Flow rate pre-set at 3 lpm at 3 bar, can be adjusted 1.5 - 6 lpm. Scale-resistant flow straightener. Duty flush (~60 sec. every 24hr after the last use). Active, infrared presence detection sensor at the end of the spout optimises detection. Chrome-plated solid brass body. Cap fixed in place by 2 concealed screws, with pictogram to easily identify sensor. PEX flexibles F⅜" with stopcocks, filters and non-return valves. Fixing reinforced by 2 stainless steel rods. Anti-blocking security. Standard side temperature control lever with adjustable maximum temperature limiter. 10-year warranty.

Deck-mounted electronic basin mixer: Independent IP65 electronic control unit. 230/12V mains supply with transformer. Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm. Scale-resistant flow straightener. Adjustable duty flush (pre-set flush ~60 sec. every 24hr after last use). Shockproof infrared presence detection sensor. Chrome-plated solid brass body. PEX flexibles with filters and solenoid valves M⅜". Fixing reinforced by 2 stainless steel rods. Anti-blocking security. Side temperature control with standard lever and adjustable maximum temperature limiter. 10-year warranty.

Ditec DAB105 is an electromechanical servo-assisted automation system for swing doors with spring, with 24 Vdc gear motor and encoder-managed kinematics, for safe and reliable management of door movement in every situation. The silent operation and clean, elegant look make Ditec DAB105 the preferred choice for swing doors in the commercial and public sector applications. The powerful gear motor easily moves wings up to 200 kg of weight or over 1.2 m of width. Ditec DAB105 can work in both push or pull mode with dedicated arms connecting the opener to the door panel. The numerous operation modes (Low Energy, PUSH&GO, Power Assist, sensor control, push-button control, etc.), as well as the possibility to easily manage double-wing swing opening make Ditec DAB105 an ideal solution that easily adapts to any requirement. A wide choice of accessories and control devices completes the product range. Ditec DAB105 fully complies with all European directives including EN 16005.

Part numbers: M17A y M17AB The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom. The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc. Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market  Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.  Adjustable power motor to regulate power consumption between 180 and 850 W.  HEPA filter media that filters solid particles in suspension.  Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.  Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.  Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.

Part numbers: M17AC & M17ACS The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom. The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc. Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market  Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.  Adjustable power motor to regulate power consumption between 180 and 850 W.  HEPA filter media that filters solid particles in suspension.  Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.  Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.  Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.

InviSense delivers a complete solution to wirelessly determine the relative humidity in buildings, such as Inside the sealant, behind different types of building panels and undercoat. The sensor is thin (0.06 mm), flexible, extremely temperature resistant and has a long shelf life. Format 62x77 mm. The sensor is certified by Sunda Hus. There is no energy-intensive technology on the sensor, so it has no battery life limitations, and it does not contribute to any radiation. The function is such that it balances with ambient RH% and when measured with the handscanner, you get an answer that is translated into an RH% value.

High-tech inside and out. Electronic control plate with infrared sensor and mechanical atuation

High-tech inside and out. Electronic control plate with infrared sensor

Stainless steel soap dispenser in satin finish with proximity sensor. Powered by 6 AA-size batteries (not included) and has tamper-resistant viewing window, removable lid with special lock and key. Capacity: 35 fl. oz. (1 L).

WINDOW STRUCTURE The type F flat roof window features a sleek modern look, characterised by excellent thermal insulation parameters. The structure of the frame is the same as for flat roof windows with a dome however the main difference lies in the glazing unit which is bonded using modern manufacturing technologies to produce a highly aesthetic and innovative design. The frame is constructed of multi-chamber PVC profiles filled with insulation material. A minimalist and perfect designed DEF flat roof window has been awarded with prestigious Red Dot Design Award. D_F WINDOW - COLOURLINE VERSION The innovative flat roof window D_F ColourLine allows you to match the colour of the window finish with theexisting roof design. A wide range of colours in accordance with the RAL Classic Palette. THE EXCELLENT SOUND INSULATION The DEF flat roof window with a double-chamber DU6 glazing unit has been tested for sound insulation during heavy rain. The result obtained, LIA= 36 [dB] confirms the high level of resistance against sound penetration, therefore the window is ideal for places where peace and silence are welcome. ACCESSORIES The structure of the window enables installation of internal as well as external accessories. The external awning blind protects against room overheating while internal accessories protect from intensive sun light and provide a decorative element. INSTALLATION RANGE The type F flat roof window is suitable for roof pitches between 2 and 15 degrees. GLAZING UNITS Windows are available with two glazing units. -DU6 - Energy-efficient, double-glazed with a whole window U-value of 0.70 W/m²K ). -DU8 Passive, triple-glazed with a whole window U-value of 0,64 W/m²K AVAILABLE SIZES In addition to standard sizes, the D_F type windows can be manufactured in non-standard sizes (in the range of 60x60 - 120x220cm). This enables existing skylights which do meet current thermal insulation requirements to be replaced with ease. DEF - Electrically opened with wireless Z-Wave system. The kit includes AC adapter, remote control and rain sensor. Sash tilts 15cm. Warranty: 10 years warranty period for window lifetime – glazing until hail resistance warranty 2 years for control elements in electric versions 2 years for gas springs

The ideal combination for a wide range of applications The Gilgen SLX-M sliding door drive unit is a universally applicable drive system with state-of-the-art functions. It is designed to offer guaranteed, reliable functioning in a wide range of highly demanding applications. The elegantly designed sensor system is built into the header profile.

The ideal combination for a wide range of applications The Gilgen SLX-M sliding door drive unit is a universally applicable drive system with state-of-the-art functions. It is designed to offer guaranteed, reliable functioning in a wide range of highly demanding applications. The elegantly designed sensor system is built into the header profile.

The ideal combination for a wide range of applications The Gilgen SLX-M sliding door drive unit is a universally applicable drive system with state-of-the-art functions. It is designed to offer guaranteed, reliable functioning in a wide range of highly demanding applications. The elegantly designed sensor system is built into the header profile.

The ideal combination for a wide range of applications The Gilgen SLX-M sliding door drive unit is a universally applicable drive system with state-of-the-art functions. It is designed to offer guaranteed, reliable functioning in a wide range of highly demanding applications. The elegantly designed sensor system is built into the header profile.

The ideal combination for a wide range of applications The Gilgen SLX-M sliding door drive unit is a universally applicable drive system with state-of-the-art functions. It is designed to offer guaranteed, reliable functioning in a wide range of highly demanding applications. The elegantly designed sensor system is built into the header profile.

Electronic washbasin fitting - high-quality chrome-plated, round - Flow rate 5 l/min - Mains operation 230 V - for cold and mixed water - Cold water: 3/8" T-distributor necessary, see accessories Art. No. 111736 - Laminar jet controller with dynamic flow control 5 l/min, angle adjustable and anti-theft protection - adjustable, active, nuisance tripping-resistant infrared sensors - Electronic module with adjustable sensing range, hygiene flushing, continuous flushing and cleaning mode - Sensor parameters preset in the factory: after-run time: approx. 1-2 s, continuous running: 4 min, sensing range: 200 mm, cleaning mode: 60 s, hygiene flushing is deactivated - asymmetrical sensing range, stable object detection - settings and service also possible by means of app via smartphone, see accessories Art. No. 65713 - safety shutdown in the event of failure of the operating voltage, user-defined settings are retained - without temperature adjustment lever: highly hygienic, vandal and misuse resistant - the preset temperature lies within the comfort zone from 30°C to 36°C - Temperature settings and adjustment can be easily made during installation due to side access - Connection via flexible pressure hoses with woven-in hot-cold marking 450 mm long, G 3/8" - integrated dirt trap screens - Brass fitting body - 118 mm high, projection 158 mm - rigid outlet - not including waste fittings - Noise class 1 - suitable for thermal disinfection according to DVGW W 551 - conforms EN 15091 - with WELL Label Article no.: HEWI AQ1.12S21040

Tork Electronic Hand Towel Roll Dispenser is designed to last in busy restrooms, so you can rest assured it will always function as smoothly as day one. The paper roll index allows for quick and easy loading. An intuitive, one-touch, control panel helps you manage the length of the hand towel being dispensed at either 10 inches and 18 inches, and Sensor Mode for patron-activated dispensing, or Hanging Mode for ready-for-use hanging towel. The roll consumption indicator informs your staff at a glance, when it's time to refill. And hygienic, one-at-a-time dispensing encourages guests to only use as many hand towels as they need, helping you reduce waste and save on cost. The long-lasting battery life allows for dispensing up to 80 rolls of 1,000 feet of toweling. Accommodates a variety of 8 inch controlled roll towels.

Tork Electronic Hand Towel Roll Dispenser is designed to last in busy restrooms, so you can rest assured it will always function as smoothly as day one. The paper roll index allows for quick and easy loading. An intuitive, one-touch, control panel helps you manage the length of the hand towel being dispensed at either 10 inches and 18 inches, and Sensor Mode for patron-activated dispensing, or Hanging Mode for ready-for-use hanging towel. The roll consumption indicator informs your staff at a glance, when it's time to refill. And hygienic, one-at-a-time dispensing encourages guests to only use as many hand towels as they need, helping you reduce waste and save on cost. The long-lasting battery life allows for dispensing up to 80 rolls of 1,000 feet of toweling. Accommodates a variety of 8 inch controlled roll towels.

Tork Electronic Hand Towel Roll Dispenser is designed to last in busy restrooms, so you can rest assured it will always function as smoothly as day one. The paper roll index allows for quick and easy loading. An intuitive, one-touch, control panel helps you manage the length of the hand towel being dispensed at either 10 inches and 18 inches, and Sensor Mode for patron-activated dispensing, or Hanging Mode for ready-for-use hanging towel. The roll consumption indicator informs your staff at a glance, when it's time to refill. And hygienic, one-at-a-time dispensing encourages guests to only use as many hand towels as they need, helping you reduce waste and save on cost. The long-lasting battery life allows for dispensing up to 80 rolls of 1,000 feet of toweling. Accommodates a variety of 8 inch controlled roll towels.

Tork Electronic Hand Towel Roll Dispenser is designed to last in busy restrooms, so you can rest assured it will always function as smoothly as day one. The paper roll index allows for quick and easy loading. An intuitive, one-touch, control panel helps you manage the length of the hand towel being dispensed at either 10 inches and 18 inches, and Sensor Mode for patron-activated dispensing, or Hanging Mode for ready-for-use hanging towel. The roll consumption indicator informs your staff at a glance, when it's time to refill. And hygienic, one-at-a-time dispensing encourages guests to only use as many hand towels as they need, helping you reduce waste and save on cost. The long-lasting battery life allows for dispensing up to 80 rolls of 1,000 feet of toweling. Accommodates a variety of 8 inch controlled roll towels.

<p>The CHV-THSTAT is a versatile heating and cooling thermostat with integrated humidistat designed for one- and two- stage control of forced air, radiant, and heat pump HVAC systems. Although functional as a standalone thermostat, the CHV-THSTAT delivers greatly enhanced functionality as part of a complete home automation system from Crestron®. Available in white, black, or almond, the stylish wall mount design is a complement to any décor.<br>The large backlit LCD display, navigable using four simple pushbuttons, provides easy access to indoor and outdoor temperature and humidity readings, setpoint adjustments, system mode and fan status indicators, and setup menus. Climate control features include separate heating, cooling, and humidity setpoints with optional automatic changeover between heating and cooling modes. Adjustable anticipators prevent overshooting the set temperature, and continuous fan operation can be selected when needed for increased circulation.<br>Automation System Integration<br>Multiple Crestron thermostats may be networked via Cresnet® to any 3-Series® control system, including the DIN-AP3, enabling global temperature and humidity adjustment from any thermostat. Automation functions such as lighting, motorized blinds, or lawn sprinklers can be accessed through two custom remote function pages, and customized text messages can be sent to the LCD display to provide maintenance reminders and other alerts.<br>Its connection to the control system also allows for full control and scheduling of the CHV-THSTAT from touch screens and computers throughout the home, and supports extensive flexibility for integration with other devices and systems. In the event that communication with the control system is disrupted for any reason, the CHV-THSTAT will remain operable to control the HVAC system.<br>Remote Sensors<br>Optional remote temperature and humidity sensors can be connected to the CHV-THSTAT for enhanced flexibility and optimized performance. Climate can be regulated according to an average of multiple sensors, or the built-in sensors can be disabled entirely to allow the CHV-THSTAT to be installed out of view. Outdoor climate can also be monitored, enabling outdoor low-temperature compensation to prevent condensation on windows during cold weather. The CHV-THSTAT accepts up to four remote temperature sensors, two remote temp/humidity sensors, or a combination of one temp/humidity and two temperature sensors.</p> <p>Features<br>Summary Of Features </p> <p>Wall mount heat/cool and humidity thermostat for one- and two-stage control of forced air, radiant and heat pump HVAC systems<br>Multiple Crestron® thermostats may be networked via Cresnet®<br>Supports remote humidity sensors and outdoor temperature sensors<br>Backlit LCD display<br>Front panel buttons for setup, configuring, and temperature/humidity adjustments<br>Available in white, black, or almond finish</p> <p>Notes: <br>1. Requires CHV-RSS Outdoor Temperature Sensor (sold separately).<br>2. Requires CHV-RTHS Remote Temperature and Humidity Sensor (sold separately).</p>

<p>The CHV-TSTAT is a versatile heating and cooling thermostat for one- and two-stage control of forced air, radiant, and heat pump HVAC systems. Relative humidity capability can be added through an external remote humidity sensor (sold separately). Although functional as a standalone thermostat, the CHV-TSTAT delivers greatly enhanced functionality as part of a complete home automation system from Crestron®. Available in white, black, or almond, the stylish wall mount design is a complement to any décor.</p> <p>The large backlit LCD display, navigable using four simple pushbuttons, provides easy access to indoor and outdoor temperature and humidity readings, setpoint adjustments, system mode and fan status indicators, and setup menus. Climate control features include separate heating, cooling, and humidity setpoints with optional automatic changeover between heating and cooling modes. Adjustable anticipators prevent overshooting the set temperature, and continuous fan operation can be selected when needed for increased circulation.</p> <p>Automation System Integration<br>Multiple Crestron thermostats may be networked via Cresnet® to any 3-Series® control system, including the DIN-AP3, enabling global temperature and humidity adjustment from any thermostat. Automation functions such as lighting, motorized blinds, or lawn sprinklers can be accessed through two custom remote function pages, and customized text messages can be sent to the LCD display to provide maintenance reminders and other alerts.<br>Its connection to the control system also allows for full control and scheduling of the CHV-TSTAT from touch screens and computers throughout the home, and supports extensive flexibility for integration with other devices and systems. In the event that communication with the control system is disrupted for any reason, the CHV-TSTAT will remain operable to control the HVAC system.</p> <p>Remote Sensors<br>Optional remote temperature and humidity sensors can be connected to the CHV-TSTAT for enhanced flexibility and optimized performance. Climate can be regulated according to an average of multiple sensors, or the built-in sensors can be disabled entirely to allow the CHV-TSTAT to be installed out of view. Outdoor climate can also be monitored, enabling outdoor low-temperature compensation to prevent condensation on windows during cold weather. The CHV-TSTAT accepts up to four remote temperature sensors, two remote temp/humidity sensors, or a combination of one temp/humidity and two temperature sensors.</p> <p>Features<br>Summary Of Features </p> <p>Wall mount heat/cool thermostat for one- and two-stage control of forced air, radiant and heat pump HVAC systems<br>Multiple Crestron® thermostats may be networked via Cresnet®<br>Supports remote humidity sensors and outdoor temperature sensors<br>Backlit LCD display<br>Front panel buttons for setup, configuring, and temperature and humidity adjustments[1]<br>Available in white, black, or almond finish</p> <p>Notes: <br>1. Humidity sensing and outdoor temperature/humidity sensing require additional remote sensors, sold separately. See “Available Accessories” for model names.</p>

<p>The CHV-TSTAT-FCU is a versatile heating and cooling thermostat for fan coil unit (FCU) HVAC systems. Relative humidity capability can be added through an external remote humidity sensor (sold separately). Although functional as a standalone thermostat, the CHV-TSTAT delivers greatly enhanced functionality as part of a complete home automation system from Crestron®. Available in white, black, or almond, the stylish wall mount design is a complement to any décor.</p> <p>The large backlit LCD display, navigable using four simple pushbuttons, provides easy access to indoor and outdoor temperature and humidity readings, setpoint adjustments, system mode and fan status indicators, and setup menus. Climate control features include separate heating, cooling, and humidity setpoints with optional automatic changeover between heating and cooling modes. Adjustable anticipators prevent overshooting the set temperature, and continuous fan operation can be selected when needed for increased circulation.</p> <p>Automation System Integration<br>Multiple Crestron thermostats may be networked via Cresnet® to any 3-Series® control system, including the DIN-AP3, enabling global temperature and humidity adjustment from any thermostat. Automation functions such as lighting, motorized blinds, or lawn sprinklers can be accessed through two custom remote function pages, and customized text messages can be sent to the LCD display to provide maintenance reminders and other alerts.</p> <p>Its connection to the control system also allows for full control and scheduling of the CHV-TSTAT-FCU from touch screens and computers throughout the home, and supports extensive flexibility for integration with other devices and systems. In the event that communication with the control system is disrupted for any reason, the CHV-TSTAT-FCU will remain operable to control the HVAC system.</p> <p>Remote Sensors<br>Optional remote temperature and humidity sensors can be connected to the CHV-TSTAT-FCU for enhanced flexibility and optimized performance. Climate can be regulated according to an average of multiple sensors, or the built-in sensors can be disabled entirely to allow the CHV-TSTAT-FCU to be installed out of view. Outdoor climate can also be monitored, enabling outdoor low-temperature compensation to prevent condensation on windows during cold weather. The CHV-TSTAT-FCU accepts up to four remote temperature sensors, two remote temp/humidity sensors, or a combination of one temp/humidity sensor and two temperature sensors.</p> <p>Features<br>Summary Of Features </p> <p>Wall-mount thermostat for fan coil unit HVAC systems<br>Multiple Crestron® thermostats may be networked via Cresnet®<br>Supports remote humidity sensors and outdoor temperature sensors<br>Backlit LCD display<br>Front panel buttons for setup, configuring, and temperature and humidity adjustments[1]<br>Available in white, black, or almond finishes</p> <p>Notes: <br>1. Humidity sensing and outdoor temperature/humidity sensing require additional remote sensors, sold separately. See “Available Accessories” for model names.</p>

<p>The CHV-TSTAT-FCU-PIR-10 thermostat enables precision 0-10 Volt control of fan coil unit (FCU) HVAC systems.   Achieve variable heating, cooling, and fan speed control in hotels, apartments, or other multi-dwelling residences.  Built with versatility and energy efficiency in mind, this thermostat has the additional benefit of a built-in passive-infrared (PIR) sensor to ensure that energy spent on climate control is never wasted on a vacant room.  Whether used as a standalone unit or as part of a complete Crestron® control system, the CHV-TSTAT-FCU-PIR-10 delivers superior functionality in a stylish wall mount design – a complement to any décor.</p> <p>The backlit LCD display and large, easy-to-read pushbuttons make this thermostat easy to navigate and use.  The screen displays useful information such as the current room temperature, setpoint, mode, and fan setting.  Pushbuttons for raising and lowering the temperature, putting the unit in Heat or Cool mode, adjusting the fan speed, and toggling between temperature scales complete the sleek look and intuitive controls of this thermostat.  Climate control features include separate heating and cooling setpoints, with an optional automatic changeover between heating and cooling modes. Adjustable anticipators prevent overshooting the set temperature, and continuous fan operation can be selected when needed for increased circulation.</p> <p>Multiple Crestron thermostats may be networked via Cresnet® wired communications,[1] a simple 4-wire network bus that acts as the communications backbone for Crestron lighting dimmers, keypads, shades, thermostats, and other devices. Integrate the thermostat network with any 3-Series® control system, including the DIN-AP3, to enable global temperature and humidity adjustments from any thermostat in the system. Access automation functions such as lighting, motorized blinds, or lawn sprinklers through two custom remote-function pages.  Customized text messages such as maintenance reminders and other alerts can be sent to every thermostat’s LCD display via the control system.</p> <p>Features<br>Summary Of Features </p> <p>0-10 Volt FCU thermostat for variable heating, cooling, and fan speed control<br>Additional heating relay for traditional heating elements<br>Built-in PIR sensor to detect room vacancy for energy efficiency<br>Cresnet® communications<br>Backlit LCD display<br>Large, easy-to-use front panel buttons for heating, cooling, fan speed, temperature scale, and temperature adjustments<br>Wall-mount installation</p> <p>Notes: <br>1. Unit is a fully functional standalone thermostat. Cresnet communications are for networking or control system integration.</p>

<p>The MP-B10 is an enhanced pushbutton control panel designed for installation in a wall or podium. It can be used with any Crestron® control system or presentation switcher, and it provides a perfect complement to any Crestron MPC Media Presentation Controller. Available in white or black, the MP-B10 is constructed to handle the rigors of everyday use in a typical classroom, meeting room, lecture hall, or training facility.</p> <p>Its 10 “hard key” buttons can be custom programmed to control any function, such as system power, input source selection, and lighting presets. Audio volume and other parameters are adjustable using the control knob and LED bargraph. Custom backlit labeling of each button is facilitated using an assortment of pre-printed labels or Crestron Engraver software. </p> <p>A built-in IR receiver provides a gateway for RC-5 and Crestron compatible IR wireless remotes. An ambient light sensor is also included, which may be programmed to control the MP-B10’s backlight intensity and other customer functions. The MP-B10 can be powered through the network wiring using either Cresnet® or PoE (Power over Ethernet), requiring just one wire for operation.</p> <p>Features<br>Summary Of Features </p> <p>Wall mount pushbutton control panel<br>No programming required with select .AV Framework™ enabled switchers<br>10 programmable buttons with LED feedback<br>Customizable backlit button labels<br>Volume control knob and LED bargraph<br>Built-in IR receiver and light sensor<br>High-speed Ethernet or Cresnet® communications<br>PoE or Cresnet network powered<br>3-gang wall box-mountable</p>

<p>The MP-B20 is an enhanced pushbutton control panel designed for installation in a wall or podium. It can be used with any Crestron® control system or presentation switcher, and it provides a perfect complement to any Crestron MPC Media </p> <p>Presentation Controller. Available in white or black, the MP-B20 is constructed to handle the rigors of everyday use in a typical classroom, meeting room, lecture hall, or training facility.</p> <p>Its 15 “hard key” buttons can be custom programmed to control any function, such as system power, input source selection, transport control, and lighting presets. The 5-way directional navigation pad enables full control of displays and other devices that utilize an onscreen menu. Audio volume and other parameters are adjustable using the control knob and LED bargraph. Custom backlit labeling of each button is facilitated using an assortment of pre-printed labels or Crestron Engraver software.</p> <p>A built-in IR receiver provides a gateway for RC-5 and Crestron compatible IR wireless remotes. An ambient light sensor is also included, which may be programmed to control the MP-B20’s backlight intensity and other customer functions. The MP-B20 can be powered through the network wiring using either Cresnet® or PoE (Power over Ethernet), requiring just one wire for operation.</p> <p>Features<br>Summary Of Features </p> <p>Wall mount pushbutton control panel<br>15 programmable buttons with LED feedback<br>Customizable backlit button labels<br>5-way navigation pad<br>Volume control knob and LED bargraph<br>Built-in IR receiver and light sensor<br>High-speed Ethernet or Cresnet® communications<br>PoE or Cresnet network powered<br>3-gang wall box-mountable</p>

<p>Crestron MPC is a family of 2-Series control systems designed for installation in a wall or podium, delivering the industry's best multimedia room control technology in a convenient, space-saving design. Perfect for classrooms, meeting rooms, lecture halls, and training facilities, the MPC-M10 provides a fully-programmable user interface featuring an attractive and intuitive layout of pushbuttons with customizable backlit labeling, volume control, and wireless remote capability.<br>Available in white or black, the MPC-M10 is constructed to handle the rigors of everyday use in a corporate or educational environment. An assortment of programmable control ports provides connectivity for audio, video, and lighting equipment. The onboard e-Control® Web server provides for complete integration as part of a facility-wide managed control network.</p> <p>Control...Simplified</p> <p>The MPC-M10 is engineered to be easy to integrate and use, yet versatile enough to suit each application perfectly. Its 10 programmable "hard key" buttons can be freely programmed for system power, input source selection, transport control, lighting presets, and any other functions. Custom backlit labeling of the buttons is facilitated using an assortment of pre-printed labels or Crestron Engraver software. Adjusting audio volume and other parameters is enabled using the continuous-turn control knob and LED bargraph.<br>Configuring a complete media presentation control solution is simplified using Crestron SystemBuilder™ software, allowing limitless programmability from the award-winning platform that's familiar to every Crestron dealer. The MPC Wizard included in SystemBuilder enables setup of a full-featured presentation system complete with lighting control and RoomView® remote management without requiring any programming. Uploading and updating a facility full of MPC systems is managed easily over the network, or individually via the front panel USB port.</p> <p>Wireless Remote<br>A range of options is available for adding wireless remote control to the MPC system. Its built-in IR receiver allows use of any Crestron IR wireless touchpanel or handheld remote without requiring a separate receiver or gateway. For greater range and freedom of movement, MPC also supports Crestron's full line of RF wireless and WiFi based products.</p> <p>Wired Expansion<br>Adding a second control panel or just adding a few more buttons is easy using the MP-B10 and MP-B20 Media Presentation Button Panels. Of course, with Cresnet® and Ethernet built-in, the MPC-M10 works seamlessly with Crestron's entire line of keypads and touchpanels, lighting dimmers and shade controllers, signal processors and switchers, and much more.</p> <p>Built-in Control Ports<br>Through its onboard control ports, the MPC-M10 interfaces directly with the video display or projector, DVD player or TV receiver, projection screen, lift, occupancy sensor, and other devices in the room. In addition to Cresnet and high-speed Ethernet, there is a bidirectional RS-232 COM port, an IR/serial port, two relays, and four input ports right on the rear panel.</p> <p>Audio and Video Control<br>The MPC-M10 is ideal for small room systems utilizing a single display device with computers and other sources connected directly to it. But like any 2-Series control system, MPC is fully scalable to suit larger applications with several program sources, microphones, or even multiple displays. Simply add a C2N-VEQ4 module to enable 4 channels of audio volume and EQ control. Or, use any of Crestron's QuickMedia® wall plate and FlipTop interfaces, switchers, and receivers for a total signal routing, processing, and amplification solution.</p> <p>Ethernet and e-Control®2<br>Built-in 10/100 Ethernet facilitates secure high-speed network connectivity, enabling extensive capabilities for remote system maintenance and control, and providing an interface to other Crestron control systems. The onboard Web server provides the foundation for Crestron's exclusive e-Control 2 Xpanel technology, providing secure IP-based remote control. SSL encryption prevents hackers from breaching the system and accessing its controls.</p> <p>RoomView® and SNMP<br>The MPC-M10 communicates directly with Crestron's exclusive RoomView help desk software, the industry's most comprehensive facility-wide solution for remote monitoring and asset management. Built-in SNMP support also enables integration with third-party network management software, allowing full control and monitoring from the IT Help Desk or NOC in a format that's familiar to IT personnel.</p> <p>Cresnet® Slave Mode<br>Selectable Cresnet Slave Mode enables the MPC-M10 to become a Cresnet keypad controller and expansion module as part of a larger Crestron system, providing a user-interface with local control ports built in for interfacing to nearby devices.</p> <p>Ambient Light Sensor<br>The MPC-M10's built-in light sensor has a range of uses, from controlling its own backlight intensity, to providing ambient lighting level data to a central building management system.</p> <p>FEATURES</p> <p>Summary Of Features<br>Wall mount 2-Series control system<br>10 programmable buttons with LED feedback<br>Customizable backlit button labels<br>Volume control knob and LED bargraph<br>Built-in IR receiver and light sensor<br>RS-232, IR, 4 input, & 2 relay control ports<br>Cresnet and 10/100 Ethernet<br>e-Control Web server<br>RoomView and SNMP support<br>SSL (Secure Sockets Layer) network protection<br>Setup via SystemBuilder software<br>Rugged construction<br>3-gang wall-mountable<br>Includes external Cresnet power supply</p>

<p>Crestron MPC is a family of 2-Series control systems designed for installation in a wall or podium, delivering the industry's best multimedia room control technology in a convenient, space-saving design. Perfect for classrooms, meeting rooms, lecture halls, and training facilities, the MPC-M20 provides a fully-programmable user interface featuring an attractive and intuitive layout of pushbuttons with customizable backlit labeling, volume control, 5-way navigation pad, and wireless remote capability.<br>Available in white or black, the MPC-M20 is constructed to handle the rigors of everyday use in a corporate or educational environment. An assortment of programmable control ports provides connectivity for audio, video, and lighting equipment. The onboard e-Control® Web server provides for complete integration as part of a facility-wide managed control network.</p> <p>Control...Simplified</p> <p>The MPC-M20 is engineered to be easy to integrate and use, yet versatile enough to suit each application perfectly. Its 15 programmable "hard key" buttons can be freely programmed for system power, input source selection, transport control, lighting presets, and any other functions. Custom backlit labeling of the buttons is facilitated using an assortment of pre-printed labels or Crestron Engraver software. The 5-way directional navigation pad enables full control of DVD players, displays, and other devices that utilize an onscreen menu. Adjusting audio volume and other parameters is enabled using the continuous-turn control knob and LED bargraph.<br>Configuring a complete MPC media presentation control solution is simplified using Crestron SystemBuilder™ software, allowing limitless programmability from the award-winning platform that's familiar to every Crestron dealer. The MPC Wizard included in SystemBuilder enables setup of a full-featured presentation system complete with lighting control and RoomView® remote management without requiring any programming. Uploading and updating a facility full of MPC systems is managed easily over the network, or individually via the front panel USB port.</p> <p>Wireless Remote<br>A range of options is available for adding wireless remote control to the MPC system. Its built-in IR receiver allows use of any Crestron IR wireless touchpanel or handheld remote without requiring a separate receiver or gateway. For greater range and freedom of movement, MPC also supports Crestron's full line of RF wireless and WiFi based products.</p> <p>Wired Expansion<br>Adding a second control panel or just adding a few more buttons is easy using the MP-B10 and MP-B20 Media Presentation Button Panels. Of course, with Cresnet® and Ethernet built-in, the MPC-M20 works seamlessly with Crestron's entire line of keypads and touchpanels, lighting dimmers and shade controllers, signal processors and switchers, and much more.</p> <p>Built-in Control Ports<br>Through its onboard control ports, the MPC-M20 interfaces directly with the video display or projector, DVD player or TV receiver, projection screen, lift, occupancy sensor, and other devices in the room. In addition to Cresnet and high-speed Ethernet, there is a bidirectional RS-232 COM port, an IR/serial port, two relays, and four input ports right on the rear panel.</p> <p>Audio and Video Control<br>The MPC-M20 is ideal for small room systems utilizing a single display device with computers and other sources connected directly to it. But like any 2-Series control system, MPC is fully scalable to suit larger applications with several program sources, microphones, or even multiple displays. Simply add a C2N-VEQ4 module to enable 4 channels of audio volume and EQ control. Or, use any of Crestron's QuickMedia® wall plate and FlipTop interfaces, switchers, and receivers for a total signal routing, processing, and amplification solution.</p> <p>Ethernet and e-Control®2<br>Built-in 10/100 Ethernet facilitates secure high-speed network connectivity, enabling extensive capabilities for remote system maintenance and control, and providing an interface to other Crestron control systems. The onboard Web server provides the foundation for Crestron's exclusive e-Control 2 Xpanel technology, providing secure IP-based remote control. SSL encryption prevents hackers from breaching the system and accessing its controls.</p> <p>RoomView® and SNMP<br>The MPC-M20 communicates directly with Crestron's exclusive RoomView help desk software, the industry's most comprehensive facility-wide solution for remote monitoring and asset management. Built-in SNMP support also enables integration with third-party network management software, allowing full control and monitoring from the IT Help Desk or NOC in a format that's familiar to IT personnel.</p> <p>Cresnet® Slave Mode<br>Selectable Cresnet Slave Mode enables the MPC-M20 to become a Cresnet keypad controller and expansion module as part of a larger Crestron system, providing a deluxe user-interface with local control ports built in for interfacing to nearby devices.</p> <p>Ambient Light Sensor<br>The MPC-M20's built-in light sensor has a range of uses, from controlling its own backlight intensity, to providing ambient lighting level data to a central building management system.</p> <p>FEATURES</p> <p>Summary Of Features<br>Wall mount 2-Series control system<br>15 programmable buttons with LED feedback<br>Customizable backlit button labels<br>5-way navigation pad<br>Volume control knob and LED bargraph<br>Built-in IR receiver and light sensor<br>RS-232, IR, 4 input, & 2 relay control ports<br>Cresnet and 10/100 Ethernet<br>e-Control Web server<br>RoomView and SNMP support<br>SSL (Secure Sockets Layer) network protection<br>Setup via SystemBuilder software<br>Rugged construction<br>3-gang wall-mountable<br>Includes external Cresnet power supply</p>

<p>Crestron MPC is a family of 2-Series control systems designed for installation in a wall or podium, delivering the industry's best multimedia room control technology in a convenient, space-saving design. Perfect for classrooms, meeting rooms, lecture halls, and training facilities, the MPC-M25 provides a fully-programmable user interface featuring an attractive and intuitive layout of pushbuttons with customizable backlit labeling, volume control, 5-way navigation pad, and wireless remote capability.<br>Available in white or black, the MPC-M25 is constructed to handle the rigors of everyday use in a corporate or educational environment. Numerous programmable control ports afford plentiful connectivity for a roomful of audio, video, and lighting equipment. The onboard e-Control® Web server provides for complete integration as part of a facility-wide managed control network.</p> <p>Control...Simplified</p> <p>The MPC-M25 is engineered to be easy to integrate and use, yet versatile enough to suit each application perfectly. Its 15 programmable "hard key" buttons can be freely programmed for system power, input source selection, transport control, lighting presets, and any other functions. Custom backlit labeling of the buttons is facilitated using an assortment of pre-printed labels or Crestron Engraver software. The 5-way directional navigation pad enables full control of DVD players, displays, and other devices that utilize an onscreen menu. Adjusting audio volume and other parameters is enabled using the continuous-turn control knob and LED bargraph.<br>Configuring a complete MPC media presentation control solution is simplified using Crestron SystemBuilder™ software, allowing limitless programmability from the award-winning platform that's familiar to every Crestron dealer. The MPC Wizard included in SystemBuilder enables setup of a full-featured presentation system complete with lighting control and RoomView® remote management without requiring any programming. Uploading and updating a facility full of MPC systems is managed easily over the network, or individually via the front panel USB port.</p> <p>Wireless Remote<br>A range of options is available for adding wireless remote control to the MPC system. Its built-in IR receiver allows use of any Crestron IR wireless touchpanel or handheld remote without requiring a separate receiver or gateway. For greater range and freedom of movement, MPC also supports Crestron's full line of RF wireless and WiFi based products.</p> <p>Wired Expansion<br>Adding a second control panel or just adding a few more buttons is easy using the MP-B10 and MP-B20 Media Presentation Button Panels. Of course, with Cresnet® and Ethernet built-in, the MPC-M25 works seamlessly with Crestron's entire line of keypads and touchpanels, lighting dimmers and shade controllers, signal processors and switchers, and much more.</p> <p>Built-in Control Ports<br>Through a host of onboard control ports, the MPC-M25 interfaces directly with the video display or projector, DVD player, TV receiver, projection screen, lift, occupancy sensor, and other devices in the room. In addition to Cresnet and high-speed Ethernet, there are two bidirectional RS-232 COM ports, two IR/serial ports, six isolated relays, and four input ports right on the rear panel.</p> <p>Audio and Video Control<br>The MPC-M25 is ideal for small room systems utilizing a single display device with computers and other sources connected directly to it. But like any 2-Series control system, MPC is fully scalable to suit larger applications with several program sources, microphones, or even multiple displays. Simply add a C2N-VEQ4 module to enable 4 channels of audio volume and EQ control. Or, use any of Crestron's QuickMedia® wall plate and FlipTop interfaces, switchers, and receivers for a total signal routing, processing, and amplification solution.</p> <p>Ethernet and e-Control®2<br>Built-in 10/100 Ethernet facilitates secure high-speed network connectivity, enabling extensive capabilities for remote system maintenance and control, and providing an interface to other Crestron control systems. The onboard Web server provides the foundation for Crestron's exclusive e-Control 2 Xpanel technology, providing secure IP-based remote control. SSL encryption prevents hackers from breaching the system and accessing its controls.</p> <p>RoomView® and SNMP<br>The MPC-M25 communicates directly with Crestron's exclusive RoomView help desk software, the industry's most comprehensive facility-wide solution for remote monitoring and asset management. Built-in SNMP support also enables integration with third-party network management software, allowing full control and monitoring from the IT Help Desk or NOC in a format that's familiar to IT personnel.</p> <p>Cresnet® Slave Mode<br>Selectable Cresnet Slave Mode enables the MPC-M25 to become a Cresnet keypad controller and expansion module as part of a larger Crestron system, providing a deluxe user-interface with local control ports built in for interfacing to nearby devices.</p> <p>Ambient Light Sensor<br>The MPC-M25's built-in light sensor has a range of uses, from controlling its own backlight intensity, to providing ambient lighting level data to a central building management system.</p> <p>FEATURES</p> <p>Summary Of Features<br>Wall mount 2-Series control system<br>15 programmable buttons with LED feedback<br>Customizable backlit button labels<br>5-way navigation pad<br>Volume control knob and LED bargraph<br>Built-in IR receiver and light sensor<br>2 RS-232, 2 IR, 4 input, & 6 relay control ports<br>Cresnet and 10/100 Ethernet<br>e-Control Web server<br>RoomView and SNMP support<br>SSL (Secure Sockets Layer) network protection<br>Setup via SystemBuilder software<br>Rugged construction<br>3-gang wall-mountable<br>Includes external Cresnet power supply</p>

ASSA ABLOY SL500 Protect sliding door system for increased protection If your business is located on a public storefront, you can sometimes feel quite vulnerable. Without the additional safeguard of being situated inside a larger building, you are your only line of defence. That’s why the ASSA ABLOY SL500 Protect has increased security measures to boost the protection of your entrance system. Certified RC2 level burglary resistant technology helps the door to fight hard against potential perpetrators. An EU cylindrical lock provides an additional obstacle as it has a hardy and sophisticated internal defence system. The ASSA ABLOY SL500 Protect is an ideal entrance solution for retail, hospitality or offices. Safe and sustainable Two key concerns for any business is safety and sustainability. The ASSA ABLOY SL500 Protect addresses both fields by being compliant with the EN 16005 safety requirement while offering sustainable features. Innovative options such as TightSeal technology with brushes for an even tighter seal and the Eco Convenience sensor to monitor your energy usage also help your automatic door system become a green machine. Staying connected The ASSA ABLOY SL500 Protect is more than your business’ new bodyguard. It has additional features to help your business function efficiently. It has a touch display operational mode selector (OMS) and is connectivity enabled – meaning you can perform preventative maintenance and remote service of your door system. Being connected also gives you the opportunity to collect data, statistics and diagnostics on your entrance solution in real time whenever you like. Arrangement This automatic sliding door system is available as either a bi-parting or single sliding door system. It comes complete with door leaf, safety devices and access control options. ASSA ABLOY SL500 Protect is available for wall mounting. Besam

The ASSA ABLOY SW200 I (Integra) complete swing door system is the perfect choice where high performance and superior safety is of extra importance. Energy-efficiency ASSA ABLOY ENTRANCE SYSTEMS automated door systems are sustainable by nature and automatically convenient as they ensure opening only when needed to pass, eliminating unnecessary air infiltration and keeping climate zones separate. The innovative electronics in the ASSA ABLOY SW200 I (Integra) complete swing door system ensure minimal energy consumption for optimal door performance. Safety The ASSA ABLOY SW200 I (Integra) is safe to use for all, despite age and physical ability. In case of an obstruction by a person or object, the obstruction control ensures stop on stall and reverse operation. Finger trap protection due to round back edge profile. Furthermore, the system is fully compliant with European standards. Convenience An entrance equipped with a ASSA ABLOY SW200 I (Integra) swing door system is always accessible due to the optional battery backup. The system also monitors the battery for power and function, and gives an electronic indication if it is not working properly and needs to be replaced. The operator is truly reliable during all weather conditions as it is not affected by stack pressure and wind load when opening and/or closing. Also, for your convenience, safety and quick exit, the system can easily be manually opened when needed; despite extended closing torque, due to sensor detection ensuring lowest manual opening force. The ASSA ABLOY SW200 I (Integra) is delivered as a complete door system ready for installation and will allow for a quick and seamless commissioning. Security The ASSA ABLOY SW200 I (Integra)’s intelligent locking features are designed for your peace of mind. For example, double doors are precisely controlled to prevent jamming and increase security. The system can also sense when the door has not closed completely and will prompt the door to open again and close fully, even under heavy wind load and stack pressure. Aesthetics The ASSA ABLOY SW200 I (Integra) is a complete swing door system providing an aesthetic look as the drive unit is connected direct to the top of the door showing no arm system. Besam

The Besam ASSA ABLOY VersaMax 2.0 Touchless ICU door system automatically opens for patients and staff with a jamb or wall mounted wave plate, making it ideal for critical care environments. Providing not only convenient access to an ICU room, it significantly reduces contact with door handles to help reduce the risk of spreading disease. Additionally, an overhead presence sensor ensures safe, precise operation. Patent pending Flush Bolt-Free technology makes breakout a simple process. Optional InteGlass is also available for electronic glass systems, seamlessly integrated within the Besam ASSA ABLOY VersaMax 2.0 ICU door and header using UL listed components. Smoke rated packages are available certified to UL1784. Disclaimer: This product is available from ASSA ABLOY Entrance Systems - North America. Consult a local representative in your Region to discuss availability. Besam ASSA ABLOY

The Besam ASSA ABLOY VersaMax 2.0 Touchless Telescopic ICU door system automatically opens for patients and staff with a jamb or wall mounted wave plate, making it ideal for critical care environments. Providing not only convenient access to an ICU room, it significantly reduces contact with door handles to help reduce the risk of spreading disease. Additionally, an overhead presence sensor ensures safe, precise operation. The telescopic configuration maximizes door opening space by 33%, while patent pending Flush Bolt-Free technology makes breakout a simple process. For single slide packages, optional InteGlass is also available for electronic glass systems, seamlessly integrated within the Besam ASSA ABLOY VersaMax 2.0 ICU door and header using UL listed components. Smoke rated packages are available certified to UL1784. Disclaimer: This product is available from ASSA ABLOY Entrance Systems - North America. Consult a local representative in your Region to discuss availability. Besam ASSA ABLOY

<p>The HTT-B10EX provides a simple, convenient wireless controller for lighting control, home automation, and entertainment in the home or office. Two-way infiNET EX® technology provides reliable wireless communication while a clean array of 10 backlit pushbuttons affords easy, tactile control of any custom function. The HTT-B10EX is a fully programmable controller designed to operate as part of a complete Crestron® automation system. <br></p>Multifunction Pushbuttons<br>Ten simple pushbuttons provide just the right amount of control without clutter or complication—perfect for most applications. For situations requiring a little more, each button can be configured to enable up to three separate functions simply by tapping, double-tapping, or pressing and holding the button. “Shift key” functionality, in which the user presses and holds one button while simultaneously tapping another, provides further customization for this versatile keypad.<br>Auto-Dimming Backlight<br>High quality backlit laser engraving provides customizable button text that is easy to read under any lighting condition. A built-in light sensor controls the backlight intensity automatically to achieve crisp, legible text in both darkened and fully lit rooms. <br>Battery or Line Power<br>The HTT-B10EX can be powered by its external power pack or two AA batteries, functioning as a stationary controller on a desk or table or as a portable wireless remote. Its auto-sleep function affords battery operation for up to eight months on a single set of alkaline batteries. Simply moving or pressing a button on the HTT-B10EX instantly wakes it from sleep mode. Connecting the power pack overrides the sleep or wake function completely for “always on” operation.<br>infiNET EX®<br>Ultra-reliable infiNET EX wireless technology provides steadfast 2-way RF communications throughout a residential or commercial structure. A complete infiNET EX network can consist of a single wireless gateway with one or more HTT-B10EX keypads, along with other wireless devices such as lighting dimmers, thermostats, door locks, motorized shades, and remotes. Many of the devices on the network act as “expanders,” relaying wireless commands between the central gateway and all the other devices on the network to ensure that every command reaches its intended destination without disruption. Every device that is added to the network effectively increases the range and stability of the entire network. [1,2]<br>Of course, the HTT-B10EX can communicate directly with the gateway if no other infiNET EX devices are installed. The wireless range for the HTT-B10EX is 150 feet (46 meters) typical indoors, which can be extended easily using one or more infiNET EX Expanders. Up to 106 HTT-B10EX keypads can be assigned to a single gateway.[1]<br>Color and Engraving Options<br>The HTT-B10EX is available in either black or white, with an attractive brushed aluminum inlay. Custom backlit engraving is available for each individual column of five buttons. <br>  <br><strong>Key Features</strong><br><ul><li>Customizable wireless pushbutton controller</li><li>10 engravable backlit buttons</li><li>Configurable for up to three functions per button</li><li>infiNET EX® wireless communications</li><li>Wireless range of 150 ft (46 meters) indoors[1,2]</li><li>Powered by batteries or external power pack</li><li>Wakes instantly when touched or picked up</li><li>Auto-dimmable backlight and LED intensity</li><li>Available in black or white</li></ul>1. Requires an infiNET EX gateway, model CEN-RFGW-EX, MC3, or DIN-AP3MEX. A single gateway supports up to 106 infiNET EX network devices. Additionally, up to 5 infiNET EX expanders (model CLW-EXPEX or GLA-EXPEX) may be added to the network for extended range. All gateways, expanders, and other infiNET EX devices are sold separately.<br>2. Crestron infiNET EX is a wireless mesh network, meaning each device on the network behaves as an expander, passing the signals it receives on to any other devices within range. This effectively extends the total range of the network, and reinforces it by providing multiple redundant signal paths. However, battery powered infiNET EX devices, including the HTT-B10EX, do not function as expanders.

<p>The HTT-B10EX provides a simple, convenient wireless controller for lighting control, home automation, and entertainment in the home or office. Two-way infiNET EX® technology provides reliable wireless communication while a clean array of 10 backlit pushbuttons affords easy, tactile control of any custom function. The HTT-B10EX is a fully programmable controller designed to operate as part of a complete Crestron® automation system. <br></p> <p>Multifunction Pushbuttons<br>Ten simple pushbuttons provide just the right amount of control without clutter or complication—perfect for most applications. For situations requiring a little more, each button can be configured to enable up to three separate functions simply by tapping, double-tapping, or pressing and holding the button. “Shift key” functionality, in which the user presses and holds one button while simultaneously tapping another, provides further customization for this versatile keypad.<br>Auto-Dimming Backlight<br>High quality backlit laser engraving provides customizable button text that is easy to read under any lighting condition. A built-in light sensor controls the backlight intensity automatically to achieve crisp, legible text in both darkened and fully lit rooms. <br>Battery or Line Power<br>The HTT-B10EX can be powered by its external power pack or two AA batteries, functioning as a stationary controller on a desk or table or as a portable wireless remote. Its auto-sleep function affords battery operation for up to eight months on a single set of alkaline batteries. Simply moving or pressing a button on the HTT-B10EX instantly wakes it from sleep mode. Connecting the power pack overrides the sleep or wake function completely for “always on” operation.<br>infiNET EX®<br>Ultra-reliable infiNET EX wireless technology provides steadfast 2-way RF communications throughout a residential or commercial structure. A complete infiNET EX network can consist of a single wireless gateway with one or more HTT-B10EX keypads, along with other wireless devices such as lighting dimmers, thermostats, door locks, motorized shades, and remotes. Many of the devices on the network act as “expanders,” relaying wireless commands between the central gateway and all the other devices on the network to ensure that every command reaches its intended destination without disruption. Every device that is added to the network effectively increases the range and stability of the entire network. [1,2]<br>Of course, the HTT-B10EX can communicate directly with the gateway if no other infiNET EX devices are installed. The wireless range for the HTT-B10EX is 150 feet (46 meters) typical indoors, which can be extended easily using one or more infiNET EX Expanders. Up to 106 HTT-B10EX keypads can be assigned to a single gateway.[1]<br>Color and Engraving Options<br>The HTT-B10EX is available in either black or white, with an attractive brushed aluminum inlay. Custom backlit engraving is available for each individual column of five buttons. <br>  <br><strong>Key Features</strong></p><ul><li>Customizable wireless pushbutton controller</li><li>10 engravable backlit buttons</li><li>Configurable for up to three functions per button</li><li>infiNET EX® wireless communications</li><li>Wireless range of 150 ft (46 meters) indoors[1,2]</li><li>Powered by batteries or external power pack</li><li>Wakes instantly when touched or picked up</li><li>Auto-dimmable backlight and LED intensity</li><li>Available in black or white</li></ul> <p>1. Requires an infiNET EX gateway, model CEN-RFGW-EX, MC3, or DIN-AP3MEX. A single gateway supports up to 106 infiNET EX network devices. Additionally, up to 5 infiNET EX expanders (model CLW-EXPEX or GLA-EXPEX) may be added to the network for extended range. All gateways, expanders, and other infiNET EX devices are sold separately.<br>2. Crestron infiNET EX is a wireless mesh network, meaning each device on the network behaves as an expander, passing the signals it receives on to any other devices within range. This effectively extends the total range of the network, and reinforces it by providing multiple redundant signal paths. However, battery powered infiNET EX devices, including the HTT-B10EX, do not function as expanders.</p>

<p>The PC-200 is a professional grade, rack-mountable power conditioner and controller designed to provide 120 Volt AC power distribution, switching, surge protection, noise filtering, and energy monitoring for Crestron® control systems, AV systems, computers, and other equipment. Eight switched outlets are provided on the rear panel, plus a single unswitched convenience outlet is provided on the front. All nine outlets are protected, filtered, and monitored. The switched outlets are arranged in four banks of two, three of which are turn-on delay-adjustable when controlled from the front panel power switch. The same three outlet banks are also individually controllable via a control system to enable selective switching of devices, on/off power sequencing, load-shedding, and other custom power control functionality.[1]<br>Built-in RMS voltage and current monitoring enables logging and reporting of the line voltage, current, power, and energy usage at the input. An external temperature sensor is included to keep tabs on heat conditions within the equipment rack or room. Network connectivity allows for setup and operation using a web browser, with extensive custom control and monitoring capabilities enabled through integration with a Crestron control system, the MyCrestron.com residential monitoring service, the Crestron Fusion® Cloud enterprise management service, or an SNMP client.[1,2]<br><br></p><strong>Power Conditioning<br></strong>A quality power conditioner is an essential component of any professional system to prevent sudden equipment failure due to lightning and electrical disturbances, to prolong the lifespan of that equipment, and to maximize overall system performance during everyday operation. The PC-200 includes the following power conditioning features:<br><ul><li><strong>Surge Protection</strong> — Provides protection against surges and spikes in the AC power line caused by lightning and other electrical disturbances</li><li><strong>Under/Over Voltage Cutoff</strong> — Shuts off power to the rear panel outlets if the line voltage strays beyond the normal operating range, which is adjustable on the PC-200</li><li><strong>Thermal Breaker</strong> — Disrupts power to all outlets in case of an overload condition</li><li><strong>EMI/RFI Noise Filtering</strong> — Prevents electromagnetic and radio frequency interference that can negatively impact sound and video quality</li><li><strong>Wiring Fault Detection</strong> — Detects faulty wiring of the incoming AC power line and shuts off power to the rear panel outlets until the fault is corrected [3]</li></ul><p><strong>Four-Stage Adjustable Turn-On Delay</strong><br>The switched outlets on the PC-200’s rear panel are arranged in four banks, with two outlets per bank. When operated by its front panel power switch, the first bank turns on immediately while the other three banks can be configured to turn on in any order according to the delay time set for each bank. Each bank is independently adjustable to provide up to 10 seconds of delay before turning on, ensuring that the connected equipment gets powered up in proper order with sufficient time for each piece to stabilize. This helps to prevent dangerous transients that can damage delicate components and potentially trip the main circuit breaker. It can also help to prevent audible pops and thumps through connected audio equipment at power-up. Delayed turn-on is initiated by turning on the front panel power switch, or by applying power to the main line input following a power outage or through an externally switched circuit.<br><br></p><p><strong>Three Remote-Controllable Switched Outlet Banks</strong><br>When connected to a local area network, three of the four outlet banks on the PC-200’s rear panel can be turned on or off independently using a web browser or control system. The other bank is always on as long as the front panel switch is turned on. This energy-saving feature allows select components to be powered down when not needed. Through integration with a control system, custom functionality can be programmed to enable control from a touch screen, keypad, remote, or mobile device. Sequential power-up and power-down functionality can be enabled through programming of the control system. For systems employing a backup generator or UPS, load-shedding can be performed to shut down unnecessary components during a power outage.[1]<br><br></p><strong>Energy Monitoring<br></strong>By sensing the incoming line voltage and the total device load, the PC-200 facilitates a host of solutions for monitoring, automating, and troubleshooting a system.<br><ul><li>Voltage monitoring allows fluctuations in the power line to be tracked and logged, helping to identify and document problems with the power utility or building wiring.</li><li>Energy monitoring provides the real power consumption (watts), current draw (amps), and energy usage (watt-hours) for all of the connected devices combined.</li><li>By connecting and testing one component at a time, the PC-200 allows power-hungry equipment to be identified and replaced with more efficient equipment.</li><li>High inrush current devices can be identified to assist in optimizing the configuration of power sequencing schemes.</li><li>Overall energy usage can be tracked and logged to identify trends and reform energy-wasting behaviors.</li><li>System usage can be tracked to inform the scheduling of maintenance and future purchasing decisions.</li><li>An alert notification can be sent if there’s a sudden or abnormal drop in current draw, potentially indicating a device has been shut off improperly or disconnected due to theft (effective only when outlets are switched on).</li></ul><p><strong>Ambient Temperature Sensing</strong></p><p>The PC-200 offers a complete equipment protection solution by monitoring the ambient temperature within the equipment cabinet or room to prevent overheating. The included temperature sensor connects to the rear of the PC-200 and features a choice of magnetic or adhesive mounting for easy placement within a typical equipment rack enclosure. The over-temperature cutoff threshold can be set to shut down power to the system if conditions exceed a safe operating temperature. Through a control system, the temperature measurement can be utilized to regulate the operation of cooling fans or air-conditioning equipment to keep equipment running cool.</p><p><strong>Ping Monitoring</strong></p><p>No matter how well a system is designed and programmed, even the finest control system or computer has the potential to lock up and stop responding once in a while. The PC-200 can be configured to detect an unresponsive device by sending it a ping command at regular intervals. If the ping request is not returned after four tries, the outlet bank feeding the monitored device cycles off and on to reboot the device, quickly restoring normal operation without any human intervention.</p><p><strong>Remote Management & Control</strong><br></p><p>The PC-200 integrates neatly into any system or facility. Used alone, it can be set up and managed through a web browser. It can also be configured to send email notifications in case of certain specified events. Integration with the MyCrestron.com residential monitoring service provides a cloud based solution for homeowners to monitor and manage the PC-200 as part of a complete Crestron home automation system. Or, Crestron Fusion Cloud provides an enterprise solution for corporations and universities to manage rooms using the PC-200 throughout a building or campus. Built-in SNMP support enables integration with third-party IT management software, allowing network administrators to manage one or many networked PC-200s in an IT-friendly format. And of course, the PC-200 can be integrated with a Crestron control system via Ethernet or Cresnet® to enable control and monitoring through a touch screen, handheld remote, or mobile device.[1,2]</p><p><strong>Key Features</strong><br></p><ul><li>Rack-mountable power conditioner and controller</li><li>Eight switched rear panel outlets, arranged in banks of two</li><li>Adjustable turn-on delay and remote switching per each of three banks</li><li>One unswitched front panel outlet</li><li>Built-in current sensing and energy monitoring</li><li>Line voltage monitoring</li><li>Professional grade surge protection</li><li>UL® 1449 Type 3 Listed</li><li>Thermal breaker overload protection</li><li>Adjustable over-voltage and under-voltage cutoff</li><li>EMI and RFI noise filtering</li><li>Wiring fault detection [3]</li><li>Ambient temperature sensing and over-temperature cutoff</li><li>Ping monitoring (device lockup detection and reboot)</li><li>Built-in energy usage and event logging</li><li>Front panel main power switch and status indicators</li><li>Easy setup and operation via web browser</li><li>Crestron® control system integration via Ethernet or Cresnet®</li><li>Remote management via MyCrestron.com, Crestron Fusion® Cloud, or SNMP [2]</li><li>Single-space 19 inch rack-mountable</li><li>Rated 15 Amps at 120 Volts AC</li><li>Limited Lifetime Product Warranty</li><li>Limited 5 Year Connected Equipment Protection Warranty</li></ul><p>1. Crestron control system and custom programming sold separately.<br>2. Email notification and direct integration with MyCrestron.com, Crestron Fusion, and SNMP will be enabled through a future firmware update. Alternately, these services can be integrated now through a Crestron control system with custom programming.<br>3. Detects most input line wiring faults. Does not detect neutral/ground reversal. Does not discern between ground connections at the AC power line, chassis, or connected equipment (a ground connection at any point will be detected by the PC-200 as normal). The installer is responsible for proper wiring and grounding of this and all connected equipment according to applicable electrical codes, accepted guidelines, and best practices. Proper wiring and function of the AC power source should be verified prior to connecting the PC-200 or any other equipment. Use of this product does not negate the responsibilities of the installer and end-user to exercise all appropriate and required measures for safe and reliable installation and operation.</p>

<p>The PC-300 is a professional grade, rack-mountable power conditioner and controller designed to provide 120 Volt AC power distribution, switching, surge protection, noise filtering, and energy monitoring for Crestron® control systems, AV systems, computers, and other equipment. Eight individually-switched outlets are provided on the rear panel, plus a single unswitched convenience outlet is provided on the front. All nine outlets are protected, filtered, and monitored. The switched outlets are each turn-on delay-adjustable when controlled from the front panel power switch. The switched outlets are also individually controllable via a control system to enable independent switching of devices, on/off power sequencing, load-shedding, and other custom power control functionality.[1]</p><p>Built-in RMS voltage and current monitoring enables logging and reporting of line voltage fluctuations at the input, as well as current, power, and energy usage at each outlet. An external temperature sensor is included to keep tabs on heat conditions within the equipment rack or room. Network connectivity allows for setup and operation using a web browser, with extensive custom control and monitoring capabilities enabled through integration with a Crestron control system, the MyCrestron.com residential monitoring service, the Crestron Fusion® Cloud enterprise management service, or an SNMP client.[1,2] Setup and operation can also be performed through the LCD front panel.</p><p> </p><strong>Power Conditioning<br></strong>A quality power conditioner is an essential component of any professional system to prevent sudden equipment failure due to lightning and electrical disturbances, to prolong the lifespan of that equipment, and to maximize overall system performance during everyday operation. The PC-300 includes the following power conditioning features:<br><ul><li><strong>Surge Protection</strong> — Provides protection against surges and spikes in the AC power line caused by lightning and other electrical disturbances</li><li><strong>Under/Over Voltage Cutoff</strong> — Shuts off power to the rear panel outlets if the line voltage strays beyond the normal operating range, which is adjustable on the PC-300</li><li><strong>Thermal Breaker</strong> — Disrupts power to all outlets in case of an overload condition</li><li><strong>EMI/RFI Noise Filtering</strong> — Prevents electromagnetic and radio frequency interference that can negatively impact sound and video quality</li><li><strong>Wiring Fault Detection</strong> — Detects faulty wiring of the incoming AC power line and shuts off power to the rear panel outlets until the fault is corrected [3]</li></ul> <p><strong>Eight-Stage Adjustable Turn-On Delay</strong><br>When operated by its front panel power switch, the PC-300 allows each of its rear panel outlets to turn on in any order according to the delay time set for each outlet. Each outlet is individually adjustable to provide up to 10 seconds of delay before turning on, ensuring that the connected equipment gets powered up in proper order with sufficient time for each piece to stabilize. This helps to prevent dangerous transients that can damage delicate components and potentially trip the main circuit breaker. It can also help to prevent audible pops and thumps through connected audio equipment at power-up. Delayed turn-on is initiated by turning on the front panel power switch, or by applying power to the main line input following a power outage or through an externally switched circuit.<br><br></p><p><strong>Eight Remote-Controllable Switched Outlets</strong><br>Any of the PC-300’s eight rear panel outlets can be turned on or off individually through the front panel LCD screen or over the network using a web browser or control system. This energy-saving feature allows select components to be powered down when not needed. Through integration with a control system, custom functionality can be programmed to enable control from a touch screen, keypad, remote, or mobile device. Sequential power-up and power-down functionality can be enabled through programming of the control system, with select outlets designated as always on. For systems employing a backup generator or UPS, load-shedding can be performed to shut down unnecessary components during a power outage.[1]</p><p> </p><strong>Energy Monitoring</strong><br>By sensing the incoming line voltage and individual device loads, the PC-300 facilitates a host of solutions for monitoring, automating, and troubleshooting a system.<br><ul><li>Voltage monitoring allows fluctuations in the power line to be tracked and logged, helping to identify and document problems with the power utility or building wiring.</li><li>Energy monitoring per outlet provides the real power consumption (watts), current draw (amps), and energy usage (watt-hours) for each connected device.</li><li>Allows power-hungry equipment to be identified and replaced with more efficient equipment.</li><li>High inrush current devices can be identified to assist in optimizing the configuration of power sequencing schemes.</li><li>Overall energy usage can be tracked and logged to identify trends and reform energy-wasting behaviors.</li><li>Individual device usage can be tracked to inform the scheduling of maintenance and future purchasing decisions.</li><li>The power state of an IR controlled device can often be determined by sensing its AC current draw, ensuring it’s on when it should be on.</li><li>An alert notification can be sent if there’s a sudden or abnormal drop in current draw, potentially indicating a device has been shut off improperly or disconnected due to theft (effective only when outlets are switched on).</li></ul><p> </p><p><strong>Ambient Temperature Sensing</strong><br>The PC-300 offers a complete equipment protection solution by monitoring the ambient temperature within the equipment cabinet or room to prevent overheating. The included temperature sensor connects to the rear of the PC-300 and features a choice of magnetic or adhesive mounting for easy placement within a typical equipment rack enclosure. The over-temperature cutoff threshold can be set to shut down power to the system if conditions exceed a safe operating temperature. Through a control system, the temperature measurement can be utilized to regulate the operation of cooling fans or air-conditioning equipment to keep equipment running cool.</p> <p><strong>Ping Monitoring</strong><br>No matter how well a system is designed and programmed, even the finest control system or computer has the potential to lock up and stop responding once in a while. The PC-300 can be configured to detect an unresponsive device by sending it a ping command at regular intervals. If the ping request is not returned after four tries, the outlet feeding the monitored device cycles off and on to reboot the device, quickly restoring normal operation without any human intervention.</p> <p><strong>Built-In Logging</strong><br>Events such as power surges, over/under voltage conditions, over-temperature conditions, ping failures, outlet switching activity, and sudden changes in current draw (indicative of a device being improperly shut off or disconnected) can all be logged as they occur to document the time and cause of problems and to track device usage. All sensor readings are logged at a configurable interval as short as five seconds providing a minimum of one week’s worth of data. Logs can be retrieved periodically to record a detailed history of events and energy usage over time.</p> <strong>UL® 1449 Certified</strong><br>The PC-300 has been tested and certified by UL as compliant with the UL 1449 safety and performance standard for surge protective devices (SPD).<br>  <br><strong>Key Features</strong><br><ul><li>Rack-mountable power conditioner and controller</li><li>Eight individual-switched rear panel outlets</li><li>Adjustable turn-on delay and local/remote switching per outlet</li><li>One unswitched front panel outlet</li><li>Built-in current sensing and energy monitoring per outlet</li><li>Line voltage monitoring</li><li>Professional grade surge protection</li><li>UL® 1449 Type 3 Listed</li><li>Thermal breaker overload protection</li><li>Adjustable over-voltage and under-voltage cutoff</li><li>EMI and RFI noise filtering</li><li>Wiring fault detection [3]</li><li>Ambient temperature sensing and over-temperature cutoff</li><li>Ping monitoring (device lockup detection and reboot)</li><li>Built-in energy usage and event logging</li><li>Front panel main power switch, status indicators, and color LCD</li><li>Easy setup and operation via front panel or web browser</li><li>Crestron® control system integration via Ethernet or Cresnet®</li><li>Remote management via MyCrestron.com, Crestron Fusion® Cloud, or SNMP [2]</li><li>Single-space 19 inch rack-mountable</li><li>Rated 15 Amps at 120 Volts AC</li><li>Limited Lifetime Product Warranty</li><li>Limited 5 Year Connected Equipment Protection Warranty</li></ul> <p>1. Crestron control system and custom programming sold separately.<br>2. Email notification and direct integration with MyCrestron.com, Crestron Fusion, and SNMP will be enabled through a future firmware update. Alternately, these services can be integrated now through a Crestron control system with custom programming.<br>3. Detects most input line wiring faults. Does not detect neutral/ground reversal. Does not discern between ground connections at the AC power line, chassis, or connected equipment (a ground connection at any point will be detected by the PC-300 as normal). The installer is responsible for proper wiring and grounding of this and all connected equipment according to applicable electrical codes, accepted guidelines, and best practices. Proper wiring and function of the AC power source should be verified prior to connecting the PC-300 or any other equipment. Use of this product does not negate the responsibilities of the installer and end-user to exercise all appropriate and required measures for safe and reliable installation and operation.</p>