-
Elevator 16
GRAPHISOFT SE | 1343649851Multi-story elevator shaft with elevator car.
-
Sign Mechanical Smoke Extraction Control
GRAPHISOFT SE | 13433993192D only.
-
Sign Mechanical Smoke Extraction
GRAPHISOFT SE | 13433993192D only.
-
Mechanical Control Panel 16
GRAPHISOFT SE | 13436498512D electric symbol with listing parameters.
-
Elevator 17
GRAPHISOFT SE | 1371557723Multi-story elevator shaft with elevator car.
-
Mechanical Control Panel 17
GRAPHISOFT SE | 13715577232D electric symbol with listing parameters.
-
Sign Mechanical Smoke Extraction Control
GRAPHISOFT SE | 13715578952D only.
-
Sign Mechanical Smoke Extraction
GRAPHISOFT SE | 13715578952D only.
-
2510 Mechanical sink mixer with swivel spout
|Deck-mounted mechanical sink mixer: Swivelling spout H. 150mm L. 230mm with hygienic flow straightener. Ø 40mm ceramic cartridge. Pre-set maximum temperature limiter. Body and spout with smooth interiors. Sculptured control lever. Flow rate limited to 9 lpm at 3 bar. PEX flexibles F3/8". Reinforced fixing via 2 stainless steel rods. 10-year warranty.
-
2565T1 Mechanical sink mixer with high spout
|Deck-mounted mechanical sink mixer: Fixed high spout H. 160mm L. 160mm with hygienic flow straightener suitable for fitting a BIOFIL terminal filter. Ø 40mm ceramic cartridge. Pre-set maximum temperature limiter. Body and spout with smooth interiors (reduces bacterial development). Flow rate limited to 9 lpm at 3 bar. Chrome-plated body, base and spout. Hygiene control lever L. 215mm requires no manual contact. Reinforced fixing via 2 stainless steel rods. PEX flexibles F3/8" with filters and non-return valves. 10-year warranty.
-
2721T Mechanical basin mixer
|Deck-mounted mechanical basin mixer, without pop-up waste. Straight spout H. 85mm L. 120mm with hygienic flow straightener. Ø 40mm ceramic cartridge. Pre-set maximum temperature limiter. Body and spout with smooth interiors and low water volume. Flow rate limited to 5 lpm at 3 bar. Solid control lever. PEX flexibles F3/8" with filters and non-return valves. Reinforced fixing via 2 stainless steel rods. 10-year warranty.
-
Tork Mini Mechanical Handtowel Dispenser, Black
|The Tork Mini Mechanical Hand Towel Roll Dispenser is ideal for environments where space is limited. Designed to fit tight spaces previously reserved for folded towels, the Tork Mini Mechanical Dispenser provides the operational benefits of a larger roll towel dispenser in a compact and attractive design. At just over 12 inches high, it is nearly six inches shorter than a full-size dispenser so it can fit into tight spaces like those between cabinets and countertops. Tork Mini Mechanical Dispenser does not require external electricity, wiring or batteries and the reversible cover can be installed to open from the left or right, increasing the options for placement. Dispenses and cuts a single 11-inch towel is ready and waiting for the next patron. There are no settings to adjust and no levers or buttons are required to operate the dispenser, reducing the risk of cross-contamination. The translucent cover saves maintenance time as staff can see at a glance when it is time to refill the dispenser, and the locking cover prevents pilferage. Accommodates a variety of 8 inch controlled roll towels.
-
Tork Mini Mechanical Handtowel Dispenser, White
|The Tork Mini Mechanical Hand Towel Roll Dispenser is ideal for environments where space is limited. Designed to fit tight spaces previously reserved for folded towels, the Tork Mini Mechanical Dispenser provides the operational benefits of a larger roll towel dispenser in a compact and attractive design. At just over 12 inches high, it is nearly six inches shorter than a full-size dispenser so it can fit into tight spaces like those between cabinets and countertops. Tork Mini Mechanical Dispenser does not require external electricity, wiring or batteries and the reversible cover can be installed to open from the left or right, increasing the options for placement. Dispenses and cuts a single 11-inch towel is ready and waiting for the next patron. There are no settings to adjust and no levers or buttons are required to operate the dispenser, reducing the risk of cross-contamination. The translucent cover saves maintenance time as staff can see at a glance when it is time to refill the dispenser, and the locking cover prevents pilferage. Accommodates a variety of 8 inch controlled roll towels.
-
Tork Mini Mechanical Handtowel Dispenser, Black
|The Tork Mini Mechanical Hand Towel Roll Dispenser is ideal for environments where space is limited. Designed to fit tight spaces previously reserved for folded towels, the Tork Mini Mechanical Dispenser provides the operational benefits of a larger roll towel dispenser in a compact and attractive design. At just over 12 inches high, it is nearly six inches shorter than a full-size dispenser so it can fit into tight spaces like those between cabinets and countertops. Tork Mini Mechanical Dispenser does not require external electricity, wiring or batteries and the reversible cover can be installed to open from the left or right, increasing the options for placement. Dispenses and cuts a single 11-inch towel is ready and waiting for the next patron. There are no settings to adjust and no levers or buttons are required to operate the dispenser, reducing the risk of cross-contamination. The translucent cover saves maintenance time as staff can see at a glance when it is time to refill the dispenser, and the locking cover prevents pilferage. Accommodates a variety of 8 inch controlled roll towels.
-
Tork Mini Mechanical Handtowel Dispenser, White
|The Tork Mini Mechanical Hand Towel Roll Dispenser is ideal for environments where space is limited. Designed to fit tight spaces previously reserved for folded towels, the Tork Mini Mechanical Dispenser provides the operational benefits of a larger roll towel dispenser in a compact and attractive design. At just over 12 inches high, it is nearly six inches shorter than a full-size dispenser so it can fit into tight spaces like those between cabinets and countertops. Tork Mini Mechanical Dispenser does not require external electricity, wiring or batteries and the reversible cover can be installed to open from the left or right, increasing the options for placement. Dispenses and cuts a single 11-inch towel is ready and waiting for the next patron. There are no settings to adjust and no levers or buttons are required to operate the dispenser, reducing the risk of cross-contamination. The translucent cover saves maintenance time as staff can see at a glance when it is time to refill the dispenser, and the locking cover prevents pilferage. Accommodates a variety of 8 inch controlled roll towels.
-
Tork Mechanical Hand Towel Roll Dispenser, white
|Tork Mechanical Hand Towel Roll Dispenser is designed to last in busy restrooms and gives reliability you could count on. Durable and easy to maintain, it delivers a hygienic dispensing experience. It reduces consumption with one at a time consumption and accommodates a variety of 7.5 inch controlled roll towels. The dispenser is available in white and black. - Reduces waste and save money with hygienic, one-at-a time dispensing. - Serves more customers, with fewer change-out due to high capacity towel options. - Easy to load with a translucent cover for quick refilling checks - Guaranteed to run well over 360 000 hand dries, saving you time, money and hassle (Hand dries based on Essity’s internal lab testing.)
-
Tork Mechanical Hand Towel Roll Dispenser, black
|Tork Mechanical Hand Towel Roll Dispenser is designed to last in busy restrooms and gives reliability you could count on. Durable and easy to maintain, it delivers a hygienic dispensing experience. It reduces consumption with one at a time consumption and accommodates a variety of 7.5 inch controlled roll towels. The dispenser is available in white and black. - Reduces waste and save money with hygienic, one-at-a time dispensing. - Serves more customers, with fewer change-out due to high capacity towel options. - Easy to load with a translucent cover for quick refilling checks - Guaranteed to run well over 360 000 hand dries, saving you time, money and hassle (Hand dries based on Essity’s internal lab testing.)
-
Tork Mechanical Hand Towel Roll Dispenser, black
|Tork Mechanical Hand Towel Roll Dispenser is designed to last in busy restrooms and gives reliability you could count on. Durable and easy to maintain, it delivers a hygienic dispensing experience. It reduces consumption with one at a time consumption and accommodates a variety of 7.5 inch controlled roll towels. The dispenser is available in white and black. - Reduces waste and save money with hygienic, one-at-a time dispensing. - Serves more customers, with fewer change-out due to high capacity towel options. - Easy to load with a translucent cover for quick refilling checks - Guaranteed to run well over 360 000 hand dries, saving you time, money and hassle (Hand dries based on Essity’s internal lab testing.)
-
Tork Mechanical Hand Towel Roll Dispenser, white
|Tork Mechanical Hand Towel Roll Dispenser is designed to last in busy restrooms and gives reliability you could count on. Durable and easy to maintain, it delivers a hygienic dispensing experience. It reduces consumption with one at a time consumption and accommodates a variety of 7.5 inch controlled roll towels. The dispenser is available in white and black. - Reduces waste and save money with hygienic, one-at-a time dispensing. - Serves more customers, with fewer change-out due to high capacity towel options. - Easy to load with a translucent cover for quick refilling checks - Guaranteed to run well over 360 000 hand dries, saving you time, money and hassle (Hand dries based on Essity’s internal lab testing.)
-
Door Closer BTS 80
|[LIST] Floor-Concealed Door Closer The BTS 80 Series of floor-concealed door closers offer adaptability to almost any installation. The closer's compact body permits its use where a larger closer would be prohibitive. Versatility allows installation in thin slab concrete subfloor construction. A wide selection of interchangeable spindles makes the BTS80 suitable for virtually any floor covering or threshold application. Dimensions Length 341 mm, Width 78 mm, Height 60 mm Spring strength (EN) 3/4/6 Max. leaf weight 300 kg Suitable for single and double action doors Floor spring tested to EN 1154 Mechanical backcheck Concealed installation [/LIST]
-
CWS Paper Basket
|White steel wire paper baskets. Rilsan-coated (resistant to acids, alkalis, mechanical damage), foldable. Delivery with waste bags and installation. Paper Baskets: CWS Paper Basket 20l: 302000 Format: 300 x 360 x 180 mm Weight: 1.013 Kg CWS Paper Basket 60l: 301000 Format: 410 x 620 x 250 mm Weight: 2.667 Kg Waste bags: various waste bags in different sizes and colours
-
Sikafloor® MultiDur EB-24
|Sikafloor® MultiDur EB-24 is a robust and hard industrial and parking deck flooring system with textured anti-slip surface. Typical layer thickness 2 - 4 mm. Available with number colors from RAL color chart. It is designed for use in areas in which slip resistance, medium chemical and high mechanical resistance is required. Product specifications: • High mechanical resistance • Good chemical resistance • Seamless • Anti-slip surface • Lot of colours available
-
Montparnasse
|Montparnasse is an easy chair designed by the French designer Christophe Pillet. Pillet got inspired by, amongst other products, ordinary camping gear and has then added elegance and quality - which has created Montparnasse. “I have always been interested in Offecct’s philosophy and method. They are into developing alternative solutions and finding new paths instead of just following trends. This easy chair is designed with the ambition of using less material. Traditionally, easy chairs, like other furniture, are based on the idea of quantity, which is not at all updated to our contemporary time. It’s unbelievable, a shame, that quality and status is still valued in terms of size and quantity in cars, sofas, bathrooms etcetera. We developed this chair with a high-tech textile mounted on a mechanical construction, making the easy chair light, while using minimal amounts of material. It’s inspired by camping gear and military furniture. The exciting challenge has been to apply the cleverness and economical thinking of camping gear, but with the comfort and finish of high-end domestic furniture. It is about providing people with space, being light and transparent in the contemporary environment.” /Christophe Pillet
-
L0105 - Microscope, Binocular, Phase Contrast
|Binocular laboratory microscope. Characteristics include a 6V, 20W tungsten halogen lamp, quadruple revolving nosepiece, a binocular body, un-graduated mechanical stage, 4X,10X,40X and 100X plan achromatic objectives. Unit has a 1.25 condenser with mount, an auxiliary swing-in condenser, two (10X) widefield eyepieces, dual diopter adjustment and may include a carrying case. Used in the laboratory to perform observations on laboratory cultures and samples. Microscope to be provided with appropriate light source and filters for phase contrast microscopy.
-
M0410 - Screen, Projection
|Projection screen. Ceiling mounted unit, manual pull-down screen. Equipped with grooved roller, a ball bearing mechanical system, and a non-gloss mat white flame retardant and mildew resistant surface. Unit opens with one continuous motion. Designed for classrooms, conference rooms, and auditoriums.
-
M9020 - Table, Exam, Pediatric, With Scale
|Pediatric exam table with scale. Cabinet type, free standing unit. It consists of one drawer and double cupboard, built-in electronic or mechanical scale and measuring tape, vinyl covered work surface and built-in paper dispenser. Equipped with protective high rim on three sides of table top. Designed for use in pediatric exam rooms.
-
S0905 - Washer, Multi-Chamber (5), Automated
|A fully automated, five multi-chamber (pre-wash, sonic cleaning, washing, rinsing, and drying), mechanical washer. The system is controlled by microcomputers that monitor and control system operations and functions and provides visual indication of deviations. A printer-recorder documents and records each cycle performance. Features an automated two rack load/indexing station and single rack unload/indexing station. Processes up to a minimum of 10 single or 40 instrument trays per hour. System designed to clean and decontaminate medical utensils and surgical instruments in a high production linear flow. Various electrical configurations are available, for pricing purposes 208V, 60HZ, 3PH, 60AMPS is used.
-
S0940 - Washer/Disinfector,STM,1DO,RSCD1WLL
|A recessed mounted (through one wall), single door (vertical sliding with tempered glass window), multi-level, mechanical, washer/disinfector, minimum chamber size 26X24X24, utilizing facility supplied steam. The unit is controlled by a microcomputer that monitors and controls all unit operations and functions and provides both audible and visual indications of deviations. A printer-recorder documents and records each cycle performance. Processing cycles are pre-programmed with pre-wash, wash/cleaning, rinse, and thermal rinse/disinfection. For use in health care facilities and laboratories where reusable items (instruments, utensils, anesthesia/respiratory goods, and glassware) are handled for decontamination purposes. This unit is not a substitute for terminal sterilization. Unit available with manual or power door, various electrical configurations, options, and accessories. Price based upon power door, 208V, 3-phase, with various options.
-
S0955 - Washer/Disinfector,STM,2DO,RCSD1WLL,LDG/UNLDG STA
|A recessed mounted (through one wall), power double doors (vertical sliding with tempered glass window), multi-level, mechanical, washer/disinfector, minimum chamber size 26X24X24, with automatic, two rack, load and unload stations/modules. Unit utilizes facility supplied steam. The unit is controlled by a microcomputer that monitors and controls all unit operations and functions and provides both audible and visual indications of deviations. A printer-recorder documents and records each cycle performance. Processing cycles are pre-programmed with pre-wash, wash/cleaning, rinse, and thermal rinse/disinfection. For use in health care facilities and laboratories where reusable items (instruments, utensils, anesthesia/respiratory goods, and glassware) are handled for decontamination purposes. This unit is not a substitute for terminal sterilization. Unit available with various electrical configurations, options, and accessories. Price based upon 208V, 3-phase and various options.
-
S0960 - Washer/Disinfector,STM,2DO,RCSD1WLL
|A recessed mounted (through one wall), double door (vertical sliding with tempered glass window), multi-level, mechanical, washer/disinfector, minimum chamber size 26X24X24, utilizing facility supplied steam. The unit is controlled by a microcomputer that monitors and controls all unit operations and functions and provides both audible and visual indications of deviations. A printer-recorder documents and records each cycle performance. Processing cycles are pre-programmed with pre-wash, wash/cleaning, rinse, and thermal rinse/disinfection. For use in health care facilities and laboratories where reusable items (instruments, utensils, anesthesia/respiratory goods, and glassware) are handled for decontamination purposes. This unit is not a substitute for terminal sterilization. Unit available with manual or power door, various electrical configurations, options, and accessories. Price based upon power door, 208V, 3-phase, with various options.
-
T8055 - Wattmeter, Ultrasonic
|Ultrasonic wattmeter. Characteristics/components include electronic and mechanical design to provide superior performance and greater durability; clear Plexiglas tubing on the front panel that allows the operator to immediately determine the liquid level within the sealed reservoir; and power measurements that can be conveniently read on the LCD display. This unit is a one-of-a-kind instrument used by biomedical repair persons who regularly test therapeutic ultrasound devices. Unit is battery powered.
-
X8501 - Simulator, Therapy, X-Ray
|This system is specifically designed to simulate radiotherapy treatment plans in the Oncology Department. The characteristics and components include a precise mechanical system including digital fluoroscopic and radiographic x-ray capabilities and a flexible computer system. It shall have the capability to simulate any linear accelerator. Shall include a couch, collimator and accessories. Movements and scales shall be a match to other treatment machines to maintain their integrity of simulation for all cancer treatments. The system shall be DICOM RT compatible, for easy linkage to film-less image management systems and review stations.
-
Ytong Hungary
|Building a masonry with using Ytong blocks results an excellent thermal insulating loadbearing or non-loadbearing wall, but also can be used for internal separator walls. There are produced additional elements (e.g. lintels, frame blocks and insultion elements) wich are complete the blocks to a "building system". With Ytong System the masonries or internal separator walls can be built fast and efficient way. The effect of workability is not only a very fast built wall but quick installation of the mechanical and electrical wires, tubes. Accuracy of the blocks results savings of material regarding the mortar for building the masonry and the surface plaster too. With this advantages the whole "ready wall" structure can be built in work-, energy, and cost efficient way.
-
Office Door with Key
|Standard mechanical solution with cylinder for single-leaf wood/timber door. Triton Cylinders suit all types of buildings with demand for flexible and secure locking. U-form door handle is intended for interior and exterior environments with a requirement for style and durability. Door solution is adapted to TEK10/NS11001 Universal Design. Typical applications: Office/Commercial, Shopping mall, Leisure, Industry, Education, Healthcare, Government/Municipality, Transport, Culture/Cinema. For more information, please contact us: http://www.trioving.no/contact-project-team
-
Lockable Interior Door Solution
|The ASSA ABLOY Belgium solution for interior doors with a mechanical lock and a security cylinder. This solution is suitable for classrooms, offices, meeting, storage, and technical rooms. This solution can also be used for fire doors. [LIST] Cylinder-Lock (latch and deadbolt), D5, by Litto, Standard: EN 12209, BENOR ATG RF30/60 Cylinder (Euro profile, double), MP83, by Litto, Standard: EN 1303 Lever Handles, Architectural Hardware, by Litto, Standard: EN 1906 Escutcheons (pair roses for cylinder), Architectural Hardware, by Litto Door Stop, Architectural Hardware, by Litto Hinges, Architectural Hardware, by Litto, Standard : EN 1935 [/LIST] Typical markets: commercial, education, healthcare, leisure, offices, public, restaurants, retail and residential For more information, please contact us: http://www.assaabloy.be/en/local/be/specification-and-bim/the-solutions-team-specification/
-
O'TOP® , Waterproofing without fixings for metal substrates
|Bituminous waterproofing system for steel-framed structures installed with no metal fixings, giving an aesthetic finish to the underside of the roof. The waterproofing comprises installation of a self-adhesive vapour control layer on to which the insulation is bonded, followed by the installation of the waterproofing by torching. O'TOP can be used on a variety of metal substrates, in particular long-span and lacquered metal trays. No mechanical fastenings are used so installation is fast and there is no need to add false ceilings in buildings such as commercial premises public halls, sports centres, etc.
-
WICLINE 65 evo - Windows
|State of the art technology and a comprehensive profile range make the aluminum window WICLINE 65 evo a perfect all-rounder with a versatile spectrum of applications. By using a design depth of only 65 mm, this system meets high standards required for thermal and sound insulation. WICLINE 65 evo offers a very attractive price / performance ratio. System test results / CE product pass in accordance with DIN EN 14351-1:2006+A1:2010 Air permeability: Class 4 Watertightness: E900 Resistance to wind load: Class C5 / B5 Acoustic performance: Rw (C;Ctr ) = 47 (–1; –4) dB Operating forces: Class 1 Load bearing capacity of safety devices: Fulfilled Mechanical strength: Class 4 Repeated opening / closing: Class 3 (20,000 cycles) Corrosion resistance of the fittings: Class 5 Burglar resistance: RC1N, RC2N, RC2, RC3 Bullet resistance: FB4 S, FB4 NS (depending on the profile combination) Quality assurance: Certified according to ISO 9001:2008 Environmental management: Certified according to ISO 14001
-
WICSTYLE 75 evo - Door
|With 75 mm profile depth, WICSTYLE 75 evo puts itself ahead in terms of thermal insulation and physical features. Its outstanding technical performance and application range make it the ideal door solution for all current and future requirements in architecture, both in new buildings and in renovations. System test results / CE product pass in accordance with DIN EN 14351-1:2006+A1:2010 Air permeability: Until Class 4 Watertightness: Until 7A Resistance to wind load: Class C2 Acoustic performance: Rw (C; Ctr) until 43 (–2; –5) dB Operating forces: Class 2 Load bearing capacity of safety devices: Fulfilled Mechanical strength: Class 3 Repeated opening / closing: Class 7 (500,000 cycles) Impact resistance: Class 1 Behaviour between different climates: Until class 2(e) 2(d) Burglar resistance: RC1N, RC2N, RC2, RC3 Quality assurance: Certified according to ISO 9001:2008 Environmental management: Certified according to ISO 14001
-
WICLINE 75 evo - Windows
|With 75 mm profile depth, WICLINE 75 evo features the highest thermal insulation properties and structural characteristics. With its superior technical performance this aluminium window is attuned to all architectural requirements of the future. In Switzerland WICLINE 75 evo has been the first metal window to be certified as Minergie-P module window. System test results / CE product pass in accordance with DIN EN 14351-1:2006+A1:2010 Air permeability: Class 4 Watertightness: E900 Resistance to wind load: Class C5 / B5 Acoustic performance: Rw (C;Ctr ) = 47 (–1; –4) dB Operating forces: Class 1 Load bearing capacity of safety devices: Fulfiled Mechanical strength: Class 4 Repeated opening / closing: Class 3 (20,000 cycles) Corrosion resistance of the fittings: Class 5 Burglar resistance: RC1N, RC2N, RC2, RC3 Bullet resistance: FB4 S, FB4 NS (depending on the profile combination) Quality assurance: Certified according to ISO 9001:2008 Environmental management: Certified according to ISO 14001
-
WICSTYLE 65 evo - Door
|WICSTYLE 65 evo with its flush leaf design in 65 mm system depth and a comprehensive application range is perfectly qualified for highest demands in design, technological quality and performance. Due to its favourable price/performance ratio it constitutes an economical aluminium door solution for almost any requirement. System test results / CE product pass in accordance with DIN EN 14351-1:2006+A1:2010 Air permeability: Class 4 Watertightness: Until 7A Resistance to wind load: Class C2 Acoustic performance: RW (C; Ctr ) until 43 (–2; –5) dB Operating forces: Class 2 Load bearing capacity of safety devices: Fulfilled Mechanical strength: Class 3 Repeated opening / closing: Class 7 (500,000 cycles) Impact resistance: Class 1 Behaviour between different climates: Until class 2(e) 2(d) Burglar resistance: RC1N, RC2N, RC2, RC3 Bullet resistance: Until FB4 Quality assurance: Certified according to ISO 9001:2008 Environmental management: Certified according to ISO 14001
-
WICLINE 95 - Windows
|WICLINE 95 meets the high requirements of the Dr. Feist Passive House Institute in Darmstadt, Germany, and due to its intelligent modular design offers maximum flexibility in planning projects. In the WICLINE 95 the thermoframe insulator sits inside the window and can be finished as a sashframe and conveniently installed by the installer using the intelligent Clips Technology. This allows a variable setting of the Uf value of the window. System test results / CE product pass in accordance with DIN EN 14351-1:2006+A1:2010 Air permeability: Class 4 Waterproofing against driving rain: E900 Resistance to wind load: Class C5 / B5 Soundproofing: Rw (C;Ctr ) = 47 (–1; –4) dB Operating forces: Class 1 Load capacity of safety precautions: passed Mechanical strength: Class 4 Continuous operation: Class 3 (20,000 cycles) Corrosion resistance of fittings: Class 5 Burglar resistance: RC1N, RC2N, RC2, RC3 Quality management: Certified according to ISO 9001:2008
-
WICLINE 75 TOP - Windows
|WICLINE 75 TOP is a highly thermally insulating window system with optimal performance, reliable fabrication and performance figures at passive house levels – combined with the familiar slimline appearance of a 75 mm window system. System tests / CE-marked product passport according to DIN EN 14351-1:2006+A1:2010 Air permeability: Class 4 Watertightness: E900 Resistance to wind load: Class C5/B5 Acoustic performance: Rw (C;Ctr) = 47 (-1;-4) dB Operating forces: Class 1 Load capacity of safety precautions: Passed Mechanical strength: Class 4 Continuous operation: Class 3 (20,000 cycles). Corrosion resistance of fittings: Class 5 Burglar resistance: RC1N, RC2N, RC2, RC3 Bullet resistance: FB4 S, FB4 NS (depending on profile combinations) Quality management: Certified to DIN EN ISO 9001:2008
-
Aliva Air Lightweight Stone System
|Aliva Air panels represent the latest lightweight production technology for cladding panels. The panels are formed from an innovative composite core and stainless steel backing plate allowing the production of large formats, specialist pieces such as column casings. The support system is mechanical utilising our standard hidden fix support structure. The panels are formed using natural stones such as limestone, sandstone, granite and marble or the latest engineered ceramics or laminated glass.
-
Aliva Air Lightweight Ceramic System
|Aliva Air panels represent the latest lightweight production technology for ceramic cladding panels. The panels are formed from an innovative composite core and stainless steel backing plate allowing the production of large formats, specialist pieces such as column casings. The support system is mechanical utilising our standard hidden fix support structure. The panels are formed using natural stones such as limestone, sandstone, granite and marble or the latest engineered ceramics or laminated glass.
-
geoSYSTEM S60
|This product is a compromise reconciling requirements of strength, permeable surface and the pursuit of maintaining a natural look of the managed surface. It performs perfectly on vast green terrain, access roads, parkings, slopes, and sidewalks. geoSYSTEM is a modern, ecologic ground reinforcement system, also known as porous, cellular paving grid. It is an excellent alternative to „heavy” (physically and aesthetically) concrete pavement slabs, concrete openwork plates, sett, asphalt, and other types of hardened surfaces. These permeable pavers are manufactured in Poland from 100% recycled HDPE. geoSYSTEM is designed for maximum load transfer and support up to 350 t/m2. Grids are connected by means of self-locking catches. Assembly of system elements is fast and easy. After sowing grass or using a gravel filler, the grid becomes practically invisible. Thanks to this, designers and investors can fully exploit the aesthetic qualities of a natural surface and design spaces with changing colors or textures. A surface such as this simultaneously exhibits large resistance to mechanical damage such as: wearing, treading
-
geoSYSTEM S60s
|This product is a compromise reconciling requirements of strength, permeable surface and the pursuit of maintaining a natural look of the managed surface. It performs perfectly on vast green terrain, access roads, parkings, slopes, and sidewalks. geoSYSTEM is a modern, ecologic ground reinforcement system, also known as porous, cellular paving grid. It is an excellent alternative to „heavy” (physically and aesthetically) concrete pavement slabs, concrete openwork plates, sett, asphalt, and other types of hardened surfaces. These permeable pavers are manufactured in Poland from 100% recycled HDPE. geoSYSTEM is designed for maximum load transfer and support up to 350 t/m2. Grids are connected by means of self-locking catches. Assembly of system elements is fast and easy. After sowing grass or using a gravel filler, the grid becomes practically invisible. Thanks to this, designers and investors can fully exploit the aesthetic qualities of a natural surface and design spaces with changing colors or textures. A surface such as this simultaneously exhibits large resistance to mechanical damage such as: wearing, treading.
-
PLAC'INOX DOOR DECORE
|Suitable for food-handling areas - Protection - Heavy traffic Wall - Wall protection Stainless steel protection for wall and door in heavy traffic corridors or food-handling areas [LIST] Stainless steel approved for food handling areas High mechanical and corrosion resistance Optimal thickness: 10/10e Easy cleaning due to smooth non-porous surface[/LIST]
-
Nemo 4B TopEco
|Nemo TopEco insert series with water heat exchanger perfectly combine water heating of the whole house with the esthetic vision of the fireplace. You can both enjoy the heat evenly distributed to the farthest spaces and beautiful vision of the burning fire. Grate-free insert design and well thought out, failure-free combustion air distribution system make that glass stays clear and water exchanger keeps optimal temperature. Inner walls of insert made of material with excellent accumulative performance, ceramic deflector Refrabox and the original system of air distribution guarantee achieving high efficiency and maintaining high combustion culture. Nemo TopEco Series distinguish with high tightness. If the combustion air is supplied from the outside of the building, then these inserts can work in rooms with mechanical ventilation (recuperation). Standard equipment: • very efficient water exchanger • integrated, highly accurate system regulation of combustion air and air-curtain on the glass • double isolated furnace lined with Refrabox ceramics • ceramic deflector Refrabox • glass with overprint, giving minimalistic design • esthetic lining of the inner side of the frame with inox strips • very efficient water jacket cooler • black or stainless steel finish • stylish, ergonomic cold handle Additional equipment: • second glass • frame finishing facade - narrow or wide, black or inox
-
Customer Outlet VFTO-E1
|Fibrain VFTO-E1 Customer outlet is another innovative product which has been specifically constructed for FTTH solutions in which functionality is one of thekey elements. Designed to reduce time and minimize the amount of space during installation while maintaining a modern and compact design.Fibrain VFTO-E1 Customer outlet is designed for FTTH networks as a termination point of the optical duct for max. 4 fibers. Our outlet facilitates placingcables of 4 mm and connecting them with fiber optic pigtails with the use fusion and mechanical splices. Therefore, it is compatible with Rapid Connector solutions, including mechanic splices placed on DCY cable.
-
Entrance Door w/ Panic Lock and Wall Reader
|ASSA ABLOY Sicherheitstechnik solution for single-leaf aluminium or steel entrance doors with a SCALA solo Wall Reader and a multi-functional self-locking lock. SCALA is the universal electronic access control. Door is also equipped with a Cam-Motion® Door Closer. When doors feature the MEDIATOR system, they are essentially locked on the outside, but, thanks to the panic function, users are able to exit buildings from the inside without a key at any time. Doors can also be opened using the access control system SCALA. [LIST] MEDIATOR Mortise Lock, mechanical, Standard: DIN EN 179 & 1125 MEDIATOR Electric Strike with Face Plate Security Fittings, ONE System (Handle Inside + Fixed Knob Outside), Standard: DIN EN 1906, DIN EN 179, DIN 18273 Door Closer Cam-Motion®, Standard: DIN EN 1154, (EPD-ASA-20130275-IBC1-EN) Access Control SCALA, Mini-Controller and Reader with Keypad Power Supply [/LIST] Typical applications: Education, School, University, Hotel, Hospital, Stadium, Multi Arena, Museum, Gallery, Shopping Mall, Bank, Industry, Office, Commercial, Congress, Multi-Residential, Health Care For more information, please contact us: www.assaabloy.de/kontakt-tuerloesungen/
-
Kindergarten Secured Entrance Door
|ASSA ABLOY Sicherheitstechnik Escape door-locking device for nursery schools with Security Door Closer. The locking element is powered and controlled via the Escape Door Control Terminal. Even children can release the door at any time using the emergency button. MEDIATOR® - the self-locking escape door lock with electric strike is approved for use on escape routes and in fire and smoke protection doors. Door is also equipped with a Security Door closer with Cam-Motion® technology. [LIST] MEDIATOR Mortise Lock, mechanical, Standard: DIN EN 179 & 1125 MEDIATOR Electric Strike with Face Plate Security Fittings, ONE System (Handle Inside + Fixed Knob Outside), Standard: DIN EN 1906, DIN EN 179, DIN 18273 Security Door Closer, Non-Hinge Side, Standard: EN 1154, EltVTR Escape Door Control Terminal, Standard: EltVTR Push Button Inside Push Button Outside Digital Time Switch Key Switch Outside Power Supply [/LIST] Typical applications: Education, Nursery School, Kindergarten, School, Health Care For more information, please contact us: www.assaabloy.de/kontakt-tuerloesungen/
-
Exterior Double Door
|ASSA ABLOY Sicherheitstechnik Solution for double-leaf aluminium or steel door with Guide-Rail Door Closer. The narrow stile version of the OneSystem Project Mortise Locks impresses with its versatility with regard to function, security and reliability. It is suitable for single-leaf doors and for double-leaf doors in combination with the unique espagnolette in the passive leaf. [LIST] Mortise Lock, OneSystem Standard project lock, Standard: EN 12209 Espagnolette OneSystem , for automatic locking of the passive leaf Security Fittings, OneSystem (Handle Inside + Fixed Knob Outside), Standard: DIN EN 1906, DIN EN 179, DIN 18273 Door closer with Cam-Motion® technology with integrated mechanical door coordinator, Standard: EN 1158, (EPD-ASA-20130275-IBC1-EN) [/LIST] Typical applications: Education, School, University, Hotel, Hospital, Stadium, Multi Arena, Museum, Gallery, Shopping Mall, Bank, Industry, Office, Commercial, Congress, Multi-Residential, Health Care For more information, please contact us: www.assaabloy.de/kontakt-tuerloesungen/
-
Exterior Double Door w/ Panic Push Bar
|ASSA ABLOY Sicherheitstechnik Security solution for double-leaf aluminium or steel doors. The OneSystem panic touch bars are perfect for use on escape doors. Door closer with Cam-Motion® technology with integrated mechanical door coordinator for double leaf doors and installation, non-hinge side. Door is equipped with the OneSystem standard panic lock in the narrow stile version in combination with a standard passive leaf lock. [LIST] Mortise Lock, OneSystem Panic Lock, Standard:EN 179, EN 1125 Passive Leaf Lock, OneSystem, Standard: EN 1634, EN 15804 Half Fittings Outside, OneSystem, Standard: DIN EN 1906, DIM 18273 Door closer with Cam-Motion® technology with integrated mechanical door coordinator, non-hinge side, Standard: EN 1158, (EPD-ASA-20130275-IBC1-EN) Carry Bar for guide rail, Double-leaf Panic Push Bar, OneSystem, Standard. EN 1125, EN 1634, EN 15804 [/LIST] Typical applications: Education, School, University, Hotel, Hospital, Stadium, Multi Arena, Museum, Gallery, Shopping Mall, Bank, Industry, Office, Commercial, Congress, Health Care For more information, please contact us: www.assaabloy.de/kontakt-tuerloesungen/
-
Entrance Door w/ Code Fitting
|ASSA ABLOY Sicherheitstechnik Security solution for single leaf aluminium or steel door with Security door code fitting ESA501. Outer door handle rotates freely, inner door handle always engaged. Memory capacity for up to 99 PIN codes. Equipped with an OneSystem panic lock and Door closer with Cam-Motion® technology. The lock/door will be self-locked automatically as soon as the door closer has closed the door. [LIST] Security Panic Lock Mechanical, OneSystem, Standard: EN 179 and EN 1125 Escutcheon code fitting + Handle, Standards: CE, EN179, EN1906, DIN18273 Door Closer Cam-Motion®, Standard: DIN EN 1154, (EPD-ASA-20130275-IBC1-EN) [/LIST] Typical applications: Education, School, University, Hotel, Hospital, Stadium, Multi Arena, Museum, Gallery, Shopping Mall, Bank, Industry, Office, Commercial, Congress, Multi-Residential, Health Care For more information, please contact us: www.assaabloy.de/kontakt-tuerloesungen/
-
Emergency Exit Door w/ Escape Control Alarm
|ASSA ABLOY Sicherheitstechnik -Emergency Exit Door Solution from the ASSA ABLOY Germany. EXITalarm is an emergency exit door alarm, which detects when the door handle is turning. Equipped with an OneSystem self-locking panic mortise lock and Door closer with Cam-Motion® technology. The lock/door will be self-locked automatically as soon as the door closer has closed the door. [LIST] Security Panic Lock Mechanical, OneSystem, Standard: EN 179 and EN 1125 Security Fittings, OneSystem (Handle Inside + Fixed Knob Outside), Standard: DIN EN 1906, DIN EN 179, DIN 18273 Door Closer Cam-Motion®, Standard: DIN EN 1154, (EPD-ASA-20130275-IBC1-EN) EXITalarm, Alarm in case of misuse of an emergency exit [/LIST] Typical applications: Public, Education, School, University, Shopping Mall, Commercial, Congress For more information, please contact us: www.assaabloy.de/kontakt-tuerloesungen/
-
Entrance Door w/ Escape Control and Push Bar
|ASSA ABLOY Sicherheitstechnik Solution for an escape route monitored single leaf aluminium or steel door. The door status (open or closed) is monitored via a door contact and the door can be authorised for release using a key switch. An alarm is triggered if the door is opened without authorisation. Equipped with an OneSystem self-locking panic mortise lock and Door closer with Cam-Motion® technology. The lock/door is automatically self-locked as soon as the door closer has closed the door. [LIST] Security Panic Lock Mechanical, OneSystem, Standard: EN 179 and EN 1125 Security Fitting Half-set, Knob outside, OneSystem, Standard: DIN EN 1906 and DIN 18273 Door Closer Cam-Motion®, Standard: DIN EN 1154, (EPD-ASA-20130275-IBC1-EN) Panic Push Bar, OneSystem, Standard. EN 1125, EN 1634, EN 15804 Door Surveillance System Key Switch Outside Reed Contact [/LIST] Typical applications: Education, School, University, Hotel, Hospital, Stadium, Multi Arena, Museum, Gallery, Shopping Mall, Bank, Industry, Office, Commercial, Congress, Health Care For more information, please contact us: www.assaabloy.de/kontakt-tuerloesungen/
-
ETICS: Alprotect Carbon
|Alprotect Carbon is the first external wall insulation system to offer unique carbon fibre technology. Ensuring maximum resistance to mechanical stress (up to 60 joules) and improved thermal performance, Alprotect Carbon provides extreme durability and versatility to modern facade design. This slim-line patented system achieves enormous stability and unrivalled impact strength.
-
ETICS: Alprotect Quattro
|The Alprotect Quattro external wall insulation system is extremely resistant to mechanical stress, offers high thermal performance and provides the ultimate protection against soiling and algae and fungal growth. In addition, highly elastic organic components guarantee high impact resistance and reliable crack bridging properties.
-
Spray-Applied Waterproofing System for Car Parking and Bridge Decks with Sikalastic®-8800 One Shot System
|Sikalastic®-8800 One Shot System is a practical, fast-applied car parking deck and bridge deck waterproofing system combining polyurea and aggregates in an innovative application method. Characteristics / advantages: •Fast application to reduce down time – directly trafficable •Elastic crack-bridging properties under a wide range of temperatures •System without asphalt overlay •Very high mechanical and abrasion resistance •Excellent corrosion protection
-
PYROPLUS 30
|The PYROPLUS door sets from DOORTAL have been designed to suit both public and private buildings, where they will stand the test of time and intensive use. They represent the highest standard for mechanical resistance with 1.5 mm thick steel, a strong sectional frame and steel hinges with stainless steel ball bearings. The “10 year warranty” label is a proof of DOORTAL’s commitment to quality. These door sets have EI 30 and EI 60 ratings (integrity and insulation). They can also be acoustic rated (40 and 50 dB) and thermal rated (U value from 1.7 to 1.4 W/m².K). Made of galvanized steel, PYROPLUS door sets are protected from rust with weather seals fixed on all four sides in order to be completely watertight. They are suitable for interior or exterior use. The PYROPLUS 30 and 60 door sets have been laboratory tested with varying door equipment: standard locks, 3 point, panic bars, electric locks for access control, door closers, vision panels etc. This opens up a wide range of fire resistant choices to suit premises open to the public, whatever functions are required. To save time on site, DOORTAL uses the “Chronofix” concept which consists of fitting all the furniture in our factory. The installer receives his custom size or standard size door set 100% ready-to-fix.
-
PYROPLUS 60
|The PYROPLUS door sets from DOORTAL have been designed to suit both public and private buildings, where they will stand the test of time and intensive use. They represent the highest standard for mechanical resistance with 1.5 mm thick steel, a strong sectional frame and steel hinges with stainless steel ball bearings. The “10 year warranty” label is a proof of DOORTAL’s commitment to quality. These door sets have EI 30 and EI 60 ratings (integrity and insulation). They can also be acoustic rated (40 and 50 dB) and thermal rated (U value from 1.7 to 1.4 W/m².K). Made of galvanized steel, PYROPLUS door sets are protected from rust with weather seals fixed on all four sides in order to be completely watertight. They are suitable for interior or exterior use. The PYROPLUS 30 and 60 door sets have been laboratory tested with varying door equipment: standard locks, 3 point, panic bars, electric locks for access control, door closers, vision panels etc. This opens up a wide range of fire resistant choices to suit premises open to the public, whatever functions are required. To save time on site, DOORTAL uses the “Chronofix” concept which consists of fitting all the furniture in our factory. The installer receives his custom size or standard size door set 100% ready-to-fix.
-
ETICS: Carbon
|Carbon is the first external wall insulation system to offer unique carbon fibre technology. Ensuring maximum resistance to mechanical stress (up to 60 joules) and improved thermal performance, Carbon provides extreme durability and versatility to modern facade design. This slim-line patented system achieves enormous stability and unrivalled impact strength
-
ETICS: Pro organic
|The Pro Organic external wall insulation system is extremely resistant to mechanical stress, offers high thermal performance and provides the ultimate protection against soiling and algae and fungal growth. In addition, highly elastic organic components guarantee high impact resistance and reliable crack bridging properties.
-
TermoKlinker White Ártico
|INSULATION PANEL + BRICK SLIPS. La Paloma Cerámicas develops TermoKlinker; a cobined insulation system of extruded polyestyrene + ceramic brick slips, designed for exterior and interior façade restoration or new buildings. The range of Brick Slips that forms TermoKlinker system is the same as that of Facing Bricks (same texture and color). TermoKlinker is designed and installed in accordance with the European Technical Approval of "Veture kits - Prefabricated units for external wall insulation" (Not ETICS) ETAG 017. The prefabricated veture units panels are made of an insulation material (XPS) bonded in factory to an external discontinuous skin of ceramic slips, with a grouting mortar applied on-site. The panels are fixed with mechanical fixinga and ancillary items. They will be sealed with a sealant and grouted with a grouting cement-based mortar. Acoustic and thermal efficiency of a building, starts in the façade, it is one of the main points to consider, it is the area in which more heat or cold transmission occurs and the main barrier against external noise. There is no doubt that we should avoid thermal bridge effect as far as possible. In this respect, houses also benefit from the high efficiency thermal envelope of a building with TermoKlinker.
-
TermoKlinker Grey Otero
|INSULATION PANEL + BRICK SLIPS. La Paloma Cerámicas develops TermoKlinker; a cobined insulation system of extruded polyestyrene + ceramic brick slips, designed for exterior and interior façade restoration or new buildings. The range of Brick Slips that forms TermoKlinker system is the same as that of Facing Bricks (same texture and color). TermoKlinker is designed and installed in accordance with the European Technical Approval of "Veture kits - Prefabricated units for external wall insulation" (Not ETICS) ETAG 017. The prefabricated veture units panels are made of an insulation material (XPS) bonded in factory to an external discontinuous skin of ceramic slips, with a grouting mortar applied on-site. The panels are fixed with mechanical fixinga and ancillary items. They will be sealed with a sealant and grouted with a grouting cement-based mortar. Acoustic and thermal efficiency of a building, starts in the façade, it is one of the main points to consider, it is the area in which more heat or cold transmission occurs and the main barrier against external noise. There is no doubt that we should avoid thermal bridge effect as far as possible. In this respect, houses also benefit from the high efficiency thermal envelope of a building with TermoKlinker.
-
TermoKlinker Ochre Guadarrama
|INSULATION PANEL + BRICK SLIPS. La Paloma Cerámicas develops TermoKlinker; a cobined insulation system of extruded polyestyrene + ceramic brick slips, designed for exterior and interior façade restoration or new buildings. The range of Brick Slips that forms TermoKlinker system is the same as that of Facing Bricks (same texture and color). TermoKlinker is designed and installed in accordance with the European Technical Approval of "Veture kits - Prefabricated units for external wall insulation" (Not ETICS) ETAG 017. The prefabricated veture units panels are made of an insulation material (XPS) bonded in factory to an external discontinuous skin of ceramic slips, with a grouting mortar applied on-site. The panels are fixed with mechanical fixinga and ancillary items. They will be sealed with a sealant and grouted with a grouting cement-based mortar. Acoustic and thermal efficiency of a building, starts in the façade, it is one of the main points to consider, it is the area in which more heat or cold transmission occurs and the main barrier against external noise. There is no doubt that we should avoid thermal bridge effect as far as possible. In this respect, houses also benefit from the high efficiency thermal envelope of a building with TermoKlinker.
-
TermoKlinker Red Bilbao
|INSULATION PANEL + BRICK SLIPS. La Paloma Cerámicas develops TermoKlinker; a cobined insulation system of extruded polyestyrene + ceramic brick slips, designed for exterior and interior façade restoration or new buildings. The range of Brick Slips that forms TermoKlinker system is the same as that of Facing Bricks (same texture and color). TermoKlinker is designed and installed in accordance with the European Technical Approval of "Veture kits - Prefabricated units for external wall insulation" (Not ETICS) ETAG 017. The prefabricated veture units panels are made of an insulation material (XPS) bonded in factory to an external discontinuous skin of ceramic slips, with a grouting mortar applied on-site. The panels are fixed with mechanical fixinga and ancillary items. They will be sealed with a sealant and grouted with a grouting cement-based mortar. Acoustic and thermal efficiency of a building, starts in the façade, it is one of the main points to consider, it is the area in which more heat or cold transmission occurs and the main barrier against external noise. There is no doubt that we should avoid thermal bridge effect as far as possible. In this respect, houses also benefit from the high efficiency thermal envelope of a building with TermoKlinker.
-
BuildBlock Insulating Concrete Forms (ICFs) 4-6-8" Straight Forms
|<p>BuildBlock ICFs are a comprehensive product family of Insulated Concrete Forms. Available in sizes 4"-12"+ they deliver superior energy-efficiency, acoustic, and disaster-reslilience performance. BuildBlock ICFs are available in all the form types necessary for construction including: 90&deg;, 45&deg;, 2'-4'-8'-12'-16'-20' radius, TaperTop, and BrickLedge configurations.</p> <p>BuildBlock ICFs deliver fast construction, multiple reinforcement options including traditional rebar up to #8 in large forms.</p> <p>BuildBlock ICF forms combine the standard features you&rsquo;ve come to expect in&nbsp;a quality ICF. BuildBlock is built for speed with the least waste and many unique benefits you&rsquo;ll find in&nbsp;no other block.</p> <ul> <li>Ready to Stack. No on-site assembly required; start installing right off the truck.</li> <li>Fully Reversible. All forms are fully reversible; no top, bottom, left or right. Longer corner design provides automatic offset for each course.</li> <li>Industry Standard Size. Industry-standard 16-inch (406.4mm) high forms produce less waste when cutting around doors and windows.</li> <li>Tight Interlocking Blocks. Blocks easily stack and securely lock into place resulting in greater strength over the competition. No foam or clips required between courses.</li> <li>2.5-inch (63.5mm) Foam Panels. Allows easy accommodation of electrical and plumbing installation in the foam.</li> <li>High-density Plastic Webs on 6-inch centers. Greater strength, more value.</li> <li>Rebar Support eliminates most steel tying.</li> <li>Easy mechanical chases for plumbing and electrical.</li> <li>Open Web Design for efficient concrete flow and half-height block support.</li> <li>Extra Heavy-duty Attachment Points (450+lbs.) Located every 8-inches vertically, and 6-inches horizontally.</li> <li>Molded-in Tape Measure and Horizontal Cut Lines.</li> <li>1-inch Repeating Cut Pattern on Block Connection.</li> <li>Lowest waste of any ICF on the market today.</li> <li>Attachment Point Markings</li> <li>No special half-height blocks required.</li> </ul>
-
MODULO- Universal concealed box
|Modulo universal concealed box - Designed to receive single-lever mixers, thermostatic valves, diverters, - suits a wide range of trims, - seal flange, - inside connection thread G1/2’’, - plug G1/2’’, - integrated level for easy adjustment during installation, - installation bracket, - prongs that mark the dry wall for cutting (cutting template), - water switch for water flush and hydro-pressure testing, - soundproofing installation with a rubber-cushioned brass construction, -DZR brass (dezincification resistant brass), -mounting depth min. 80 mm, max. 110 mm, - wide choice : coordinates with a wide choice of trims, - easy valve and trim change EASY VALVE AND TRIM, - change : option to switch from mechanical to thermostatic mode.
-
2521EP Pressure balancing basin mixer SECURITHERM
|Deck-mounted mechanical basin mixer: SECURITHERM pressure-balancing mixer without pop-up waste. Anti-scalding safety: HW flow rate is reduced if cold water supply fails. Spout H. 85mm L. 135mm with BIOSAFE hygienic spout outlet. Ø 40mm ceramic cartridge with pressure-balancing. Pre-set maximum temperature limiter. Flow rate limited to 5 lpm at 3 bar. Sculptured control lever. PEX flexibles F3/8" with filters and non-return valves. Reinforced fixing via 2 stainless steel rods. 10-year warranty.
-
714700 Time flow shower panel SPORTING 2
|Time flow shower panel: Anodised aluminium and chrome-plated satin finish. Adjustable connector for top or back inlet. Slimline structure with concealed fixings. Soft-touch operation. Automatic mechanical flush with every use. Time flow ~30 sec. Flow rate 6 lpm at 3 bar. Tamperproof fixed shower head with scale-resistant nozzle and automatic flow rate regulation. Adjustable spray angle can be locked in place. Non-return valve and accessible filter. Integrated stopcock. M½" connection for mixed water supply. 10-year warranty.
-
Acrylicon Multi-Grip System
|The Acrylicon Multi-Grip System is an industrial mono-colour system which can be elasticised for areas with high thermal and mechanical stresses and outdoor applications. The thickness of the system is 2-4mm. The system is suitable for car parks, walkways and ramps due to the integral slip resistance. Fibreglass arming can be installed within the system for added protection against movement cracking. Designed for use in outdoor and indoor areas where the temperature can vary. The elasticity and low temperature flexibility improves the performance in outdoor applications such as exterior parking decks, exterior walk ways (airports and vestibule walk off areas where salt is often used), safety marking zones and mezzanine metal gantries.
-
Acrylicon Industry System
|The Acrylicon Industry System is a trowel applied mortar system with an excellent compressive strength and tensile strength in bending. It is characterised by very low linear shrinkage, high wear resistance and unparalleled longevity. Due to Acrylicon’s unique ability to chemically bond it can be combined with other Acrylicon Systems to provide a decorative finish. The cure time is under 2 hours, even at temperatures down to -25°C, meaning any downtime is reduced to a minimum. Designed to withstand heavy duty mechanical stress, both indoor and outdoor. Suitable for use in offshore applications, heavy engineering, freezers and as a heavy duty screed (up to 550mm thickness) for other Acrylicon Systems.
-
Exterior Double Door
|ASSA ABLOY Belgium Solution for double-leaf aluminium or steel doors. The active leaf of the double door is equipped with a narrow stile version of the OneSystem mortise lock, the passive leaf is equipped with an espagnolette which locks this. The double door is self-closing using the Cam-Motion® technology with integrated mechanical door coordinator. Typical applications: Education, School, University, Shopping Mall, Office, Commercial, Health Care For more information, please contact us: http://www.assaabloy.be/en/local/be/specification-and-bim/the-solutions-team-specification/
-
Exterior Double Door w/ Panic Push Bar
|ASSA ABLOY Belgium Solution for double-leaf aluminium or steel doors. Both leaves are equipped with the OneSystem panic touch bars. The active leaf and the passive leaf are each equipped with a narrow stile version of the OneSystem mortise panic lock. The lock of the active leaf has an extra locking point on top of the door and B-function. The double door is self-closing using the Cam-Motion® technology with integrated mechanical door coordinator. Typical applications: Education, School, University, Shopping Mall, Office, Commercial, Health Care For more information, please contact us: http://www.assaabloy.be/en/local/be/specification-and-bim/the-solutions-team-specification/
-
Exterior Double Door
|ASSA ABLOY Solution for double-leaf aluminium or steel doors. The active leaf of the double door is equipped with a narrow stile version of the OneSystem mortise lock, the passive leaf is equipped with an espagnolette which locks this. The double door is self-closing using the Cam-Motion® technology with integrated mechanical door coordinator. Typical applications: Education, School, University, Shopping Mall, Office, Commercial, Health Care For more information, please contact us: http://www.assaabloy.lu/en/local/lu/specification-and-bim/the-solutions-team-specification/
-
Exterior Double Door w/ Panic Push Bar
|ASSA ABLOY Solution for double-leaf aluminium or steel doors. Both leaves are equipped with the OneSystem panic touch bars. The active leaf and the passive leaf are each equipped with a narrow stile version of the OneSystem mortise panic lock. The lock of the active leaf has an extra locking point on top of the door and B-function. The double door is self-closing using the Cam-Motion® technology with integrated mechanical door coordinator. Typical applications: Education, School, University, Shopping Mall, Office, Commercial, Health Care For more information, please contact us: http://www.assaabloy.lu/en/local/lu/specification-and-bim/the-solutions-team-specification/
-
Exterior Double Door
|ASSA ABLOY Solution for double-leaf aluminium or steel doors. The active leaf of the double door is equipped with a narrow stile version of the OneSystem mortise lock, the passive leaf is equipped with an espagnolette which locks this. The double door is self-closing using the Cam-Motion® technology with integrated mechanical door coordinator. Typical applications: Education, School, University, Shopping Mall, Office, Commercial, Health Care For more information, please contact us: http://www.assaabloy.nl/nl-nl/local/nl/architecten_en_bestekschrijvers/solutions-team/
-
Exterior Double Door w/ Panic Push Bar
|ASSA ABLOY Solution for double-leaf aluminium or steel doors. Both leaves are equipped with the OneSystem panic touch bars. The active leaf and the passive leaf are each equipped with a narrow stile version of the OneSystem mortise panic lock. The lock of the active leaf has an extra locking point on top of the door and B-function. The double door is self-closing using the Cam-Motion® technology with integrated mechanical door coordinator. Typical applications: Education, School, University, Shopping Mall, Office, Commercial, Health Care For more information, please contact us: http://www.assaabloy.nl/nl-nl/local/nl/architecten_en_bestekschrijvers/solutions-team/
-
Standard
|Standard is an economical system characterized by a straight narrow profile providing the door with delicate framing which gives the front an impression of lightness. This popular system is often chosen by our clients. The wardrobes which use the Standard system work very well in narrow halls and in the attic. It is a good solution for minimalist interiors in classic, retro or Scandinavian styles. The wood-like version of the profile suits interiors in Provençal style. Unlike in the Lux system, the profile is characterized by a narrow frame and delicate form of the handle. Main advantage: • The unique in the market, proven and very durable system. • Profiles: powder coating or finished with wood-look PVC coating, corrosion resistant. • The biggest range of door height adjustments among all systems. • The special anti-jumping function which prevents the door from falling out of the track. • Smooth sliding of the door thanks to bottom rollers equipped for bearings. • The buffer strips with long and short hair protecting from dust and damping sounds. • The pneumatic closing mechanisms provide for gentle door closing. • Mechanical lock option is available. Available options: • sliding doors • pivoting doors Contact details: Phone: +48 48 332-17-05 e-mail: komandor@komandor.pl
-
LUX
|The Lux system features wide edges and regular shapes. A smooth surface and slight indentation in the central part of the profile cause that it is very comfortable in use. The regular shape of the profile makes the wardrobe as well as the interior look softer. When we use a panel in the wood-like frame, the wardrobes in the Lux system give an impression of a solid piece of furniture and therefore they fit into rustic or classic style. Possibility of using different materials (glass, chipboard panels) fillings at one door, makes LUX system very widely used in the interior of different styles from classic, through retro, marine to rustic. Main advantage: • The unique in the market, proven and very durable system. • Profiles: powder coating or finished with wood-look PVC coating, corrosion resistant. • The biggest range of door height adjustments among all systems. • The special anti-jumping function which prevents the door from falling out of the track. • Smooth sliding of the door thanks to bottom rollers equipped for bearings. • The buffer strips with long and short hair protecting from dust and damping sounds. • The pneumatic closing mechanisms in the top track provide for gentle door closing. • Touch to open mechanism with soft-close solution option is available. • Mechanical lock and electronic lock options are available. Available options: • sliding doors • sliding door with divisions • pivoting doors • pivoting doors with divisions • slanted doors Contact details: Phone: +48 48 332-17-05 e-mail: komandor@komandor.pl
-
Magnetyt
|Magnetyt is the most advanced steel system combining the strength of steel with the beauty of aluminium where the frame is similar in shape to the aluminium profile of the Lazuryt line. A gentle classic but slightly rounded shape of the profile causes that it works very well with a wide range of filling materials. This profile matches well with classic interiors but also with rural ones like, for example, Provençal or rustic styles or even the more adventurous ones like vintage or eclectic. Main advantage: • Innovative, advanced and well-developed system with very quiet bottom rollers. • Stile offer a comfortable handle for easy opening and closing combined with impressive finish. • Profiles: powder coating or finished with wood-look PVC coating, corrosion resistant. • Rails masking strips in colours matching profiles, concealing the sliding mechanisms, create an attractive look. • The buffer strips with long and short hair protecting from dust and damping sounds. • The pneumatic closing mechanisms provide for gentle door closing. • Touch to open mechanism with soft-close solution option is available. • Mechanical lock and electronic lock options are available. Available options: • sliding doors • sliding door with divisions Contact details: Phone: +48 48 332-17-05 e-mail: komandor@komandor.pl
-
Agat
|The Agat system refers to the culture of antique which for many ages has influenced the European beauty canons. Simplicity and harmony are the main characteristics of this profile which is a combination of an austere solid figure of classical simple and regular shapes with a modern expressive form. The profile provides wardrobes with lightness, softens their character without depriving them of harmony and perfect proportions. This is an offer for interiors in classic, retro, marine or boho styles, and even in romantic or French style with appropriate stylization. Main advantage: • Light, modern style with a hidden rolling system and invisible fastenings of bottom track. • Can be used in rooms of higher humidity and as an entrance door. • Possibility of using concealable bottom tracks making the use of the system easier. • The buffer strips with long and short hair protecting from dust and damping sounds. • The pneumatic closing mechanisms provide for gentle door closing. • Touch to open mechanism with soft-close solution option is available. • Mechanical lock and electronic lock options are available. • Curvilinear partition of the door is an option. Available options: • sliding doors • sliding door with divisions • pivoting doors • pivoting doors with divisions • slanted doors Contact details: Phone: +48 48 332-17-05 e-mail: komandor@komandor.pl
-
Onyx
|The Onyx system profile is a combination of two forms: a geometric one of simple and regular shapes and the one with a gentle rounded line. Simple finishes provide it with a special look which causes that the profile can match the most modern interiors making them more expressive and providing the built-in furniture with elegance and class. This comfortable in use profile is an option suitable for classic or minimalist interiors as well as those in modern, vintage or industrial styles. Main advantage: • Light, modern style with a hidden rolling system and invisible fastenings of bottom track. • Can be used in rooms of higher humidity and as an entrance door. • Possibility of using concealable bottom tracks making the use of the system easier. • The buffer strips with long and short hair protecting from dust and damping sounds. • The pneumatic closing mechanisms provide for gentle door closing. • Touch to open mechanism with soft-close solution option is available. • Mechanical lock and electronic lock options are available. • Curvilinear partition of the door is an option. Available options: • sliding doors • sliding door with divisions • pivoting doors • pivoting doors with divisions Contact details: Phone: +48 48 332-17-05 e-mail: komandor@komandor.pl
-
Lazuryt
|Lazuryt is a system applying the profile of a perfect subtle shape which looks very delicate. The slender line of the door, delicate roundness on the frame edges, purity of the form and perfect composition of the shape make Lazuryt an aristocrat among similar profiles. It is the profile which makes the wardrobes and interiors look elegant and classy and at the same time fresh and modern. For these reasons it matches such styles as: classic, retro, vintage, but also Scandinavian, eclectic and modern. Lazuryt looks good practically everywhere. Main advantage: • Light, modern style with a hidden rolling system and invisible fastenings of bottom track. • Can be used in rooms of higher humidity and as an entrance door. • Possibility of using concealable bottom tracks making the use of the system easier. • The buffer strips with long and short hair protecting from dust and damping sounds. • The pneumatic closing mechanisms provide for gentle door closing. • Touch to open mechanism with soft-close solution option is available. • Mechanical lock and electronic lock options are available. • Curvilinear partition of the door is an option. Available options: • sliding doors • sliding door with divisions • pivoting doors • pivoting doors with divisions • slanted doors • corner doors (inner, outer) Contact details: Phone: +48 48 332-17-05 e-mail: komandor@komandor.pl
-
Szafir
|Szafir is a system of a narrow, geometrically stylized, modern, elegant and tasteful profile matching any interior. The use of aluminum and choice of interesting colours emphasize the original shape and character of the profile making it more expressive. The wardrobes finished in the Szafir profile give an impression of modernity, originality and elegance. This is one of the most popular profiles in Komandor’s offer. It combines functionality of the frame which serves as a hand grip and a delicate look. Szafir looks good in modern, industrial, eclectic, Scandinavian as well as classic interiors. Main advantage: • A very popular system of assembled door, valued for durability and strength. • The invisible gasket provides an elegant look for the door with transparent glass. • Possibility of making the door of up to 1.5 m in width. • Silent and easy door movement with variable adjustment of door height. • Hidden sliding mechanisms and invisible fastenings of the bottom track. • The pneumatic closing mechanisms provide for gentle door closing. • Touch to open mechanism with soft-close solution option is available. • Mechanical lock and electronic lock options are available. • Curvilinear partition of the door is an option. Available options: • sliding doors • sliding door with divisions Contact details: Phone: +48 48 332-17-05 e-mail: komandor@komandor.pl
-
Sahara
|Sahara System contains 2 profiles. Sahara 1 is an economical narrow aluminum profile characterized by a refined but simple shape which makes light framing for door filling. Its subtlety and slender line cause that it perfectly emphasizes the materials of fillings, in other words, their colour, structure and surface beauty without dominating the door. It is ideal for interiors arranged in minimalist, marine, or even boho or vintage styles. Sahara 2 is an economical narrow aluminum profile having a rounded handle. Its subtle and simple shape creates light framing for door filling, while its slender and elongated line curiosly emphasizes the filling of the doors providing only a delicate complement to them. The system is ideal for minimalist, marine, boho, vintage, retro or classic interiors. Main advantage: • Popular, light and quiet sliding door system. • Door options: with uniform panel, combined of various materials or with an imitated partition with a decorative batten. • The buffer strips with short and long hair protecting from dust and damping sounds. . • The special anti-jumping function which prevents the door from falling out of the bottom track. • The pneumatic closing mechanisms provide for gentle door closing. • Mechanical lock and electronic lock options are available. Available options: • sliding doors • sliding door with divisions • pivoting doors • pivoting doors with divisions • slanted doors Contact details: Phone: +48 48 332-17-05 e-mail: komandor@komandor.pl
-
Interior doors
|In its wide offer Komandor has also hanging doors which are both practical and aesthetic. The system of hanging doors is an ideal solution if we want to separate two independent spaces from each other and at the same time keep a comfortable passage between them. In such a case hanging doors become passage doors and allow us to use the space as it suits us, make it larger or smaller, as needed. They are available in single and double system. Single system – simple, slender in shape of aluminum profile in anode natural allows use only one filling in the door. As the door materials are visible from both sides, the best option would be glass or chipboard. Double system – classical aluminum profile with natural anodizing, designed to the use different fillings on each side of the door, what gives higher range of design options. Door opening is facilitated by an aesthetic handle being an integral part of the system. Main advantage: • A light structure, without the bottom track, with sliding mechanism in the top track. • Possibility of using as an entrance door with width of up to 1.5 m. • Possibility of mounting and concealing the bottom track in the crevice of the wall or ceiling. • Possibility of flexible arrangement and the use of different fillings on both sides of the door. • Mechanical lock option is available. • The pneumatic closing mechanisms provide for gentle door closing. Available options: • Hanging doors • Corner hanging doors, outer Contact details: Phone: +48 48 332-17-05 e-mail: komandor@komandor.pl
-
Ytong Italy Ceiling d=337mm
|Ytong Multipor boards are a silicate insulating material and are classified as ecological and completely recycleable. Ytong Multipor panels provide a lot of advantages particurarly for renovating old building: they are open for vapour diffusion, but water repellent, with high thermal insulation factor. They are suitable to insulate Ytong slab panels roofs without vapour barrier. In addition to the thermal insulation, Multipor panel is a non-combustible material and it doesn't develop toxic gases in case of fire; Multipor is a non-compressible material, with a good mechanical resistance. Particularly suited for insulation work on large areas as well as for angular and highly articulated ceilings. Here you can find the premium solution for Ytong Multipor insulation for Ytong slab panel roofs, applied with Multipor light mortar used for gluing, reinforcing and plastering. For advanced users, the unitization tool for Ytong blocks gives you a exact amount of panels. Experts from Ytong help you in the design and construction of sustainable solutions with Ytong Multipor boards insulation of Ytong slab panels.
-
Ytong Italy Roof d=337mm
|Ytong Multipor boards are a silicate insulating material and are classified as ecological and completely recycleable. Ytong Multipor panels provide a lot of advantages particurarly for renovating old building: they are open for vapour diffusion, but water repellent, with high thermal insulation factor. They are suitable to insulate Ytong slab panels roofs without vapour barrier. In addition to the thermal insulation, Multipor panel is a non-combustible material and it doesn't develop toxic gases in case of fire; Multipor is a non-compressible material, with a good mechanical resistance. Particularly suited for insulation work on large areas as well as for angular and highly articulated ceilings. Here you can find the premium solution for Ytong Multipor insulation for Ytong slab panel roofs, applied with Multipor light mortar used for gluing, reinforcing and plastering. For advanced users, the unitization tool for Ytong blocks gives you a exact amount of panels. Experts from Ytong help you in the design and construction of sustainable solutions with Ytong Multipor boards insulation of Ytong slab panels.
-
EKLEIPSIS Wall - Ceiling Mounted
|Indirect light, ceiling-mounted LED product in three different sizes. Designed for both outdoors and indoors. The product's design and the advanced technology of its reflected light optic systems offer an optimum level of visual comfort. There are no visible screws or fragile elements so higher safety and mechanical resistance standards are guaranteed.
-
XPS NIII I
|Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched.
-
XPS NIII L
|Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: [LIST] Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched. [/LIST]
-
XPS NIII PR
|Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: [LIST] Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched. [/LIST]
-
XPS NV L
|Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: [LIST] Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched. [/LIST]
-
XPS NW E
|Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: [LIST] Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched. [/LIST]
-
XPS RG
|Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: [LIST] Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched. [/LIST]
-
Hollow clay infill block 12 x 70 cm
|Hollow clay infill blocks are especially recommended for one-way ribbed slabs with block filler with either steel or precast concrete joists. These hollow blocks are manufactured according to the highest quality and environmental standards. The design of the hollow clay infill block, with vertical partitions and triangular reinforcements at the top and bottom, provides optimum resistance. This feature, along with a near zero breakage rate, make the hollow clay infill block for ribbed slabs an essential constructive element in any high quality and energy-efficient building. The main advantages of ribbed floor slabs over solid concrete slabs are: [LIST] Savings in structural steel, due to its lighter weight Lower labour costs due to its easy assembly Better acoustic and thermal insulation Safe usage due to its high mechanical resistance Excellent adherence with gypsum, mortar and concrete [/LIST] The 12 x 70 cm format is mostly used along the Spanish Mediterranean coast, where it fits perfectly the constructive needs of the area.
-
Hollow clay infill block 16 x 70 cm
|Hollow clay infill blocks are especially recommended for one-way ribbed slabs with block filler with either steel or precast concrete joists. These hollow blocks are manufactured according to the highest quality and environmental standards. The design of the hollow clay infill block, with vertical partitions and triangular reinforcements at the top and bottom, provides optimum resistance. This feature, along with a near zero breakage rate, make the hollow clay infill block for ribbed slabs an essential constructive element in any high quality and energy-efficient building. The main advantages of ribbed floor slabs over solid concrete slabs are: [LIST] Savings in structural steel, due to its lighter weight Lower labour costs due to its easy assembly Better acoustic and thermal insulation Safe usage due to its high mechanical resistance Excellent adherence with gypsum, mortar and concrete [/LIST] Versatile and easy to use.
-
Hollow clay infill block 20 x 70 cm
|Hollow clay infill blocks are especially recommended for one-way ribbed slabs with block filler with either steel or precast concrete joists. These hollow blocks are manufactured according to the highest quality and environmental standards. The design of the hollow clay infill block, with vertical partitions and triangular reinforcements at the top and bottom, provides optimum resistance. This feature, along with a near zero breakage rate, make the hollow clay infill block for ribbed slabs an essential constructive element in any high quality and energy-efficient building. The main advantages of ribbed floor slabs over solid concrete slabs are: [LIST] Savings in structural steel, due to its lighter weight Lower labour costs due to its easy assembly Better acoustic and thermal insulation Safe usage due to its high mechanical resistance Excellent adherence with gypsum, mortar and concrete [/LIST] The 20x70 cm format is a great choice for medium-depth slabs, and it is easy to use.
-
Hollow clay infill block 22 x 70 cm
|Hollow clay infill blocks are especially recommended for one-way ribbed slabs with block filler with either steel or precast concrete joists. These hollow blocks are manufactured according to the highest quality and environmental standards. The design of the hollow clay infill block, with vertical partitions and triangular reinforcements at the top and bottom, provides optimum resistance. This feature, along with a near zero breakage rate, make the hollow clay infill block for ribbed slabs an essential constructive element in any high quality and energy-efficient building. The main advantages of ribbed floor slabs over solid concrete slabs are: [LIST] Savings in structural steel, due to its lighter weight Lower labour costs due to its easy assembly Better acoustic and thermal insulation Safe usage due to its high mechanical resistance Excellent adherence with gypsum, mortar and concrete [/LIST] The 22x70 cm format is a great choice for medium-depth slabs, and it is easy to use.
-
Hollow clay infill block 25 x 70 cm
|Hollow clay infill blocks are especially recommended for one-way ribbed slabs with block filler with either steel or precast concrete joists. These hollow blocks are manufactured according to the highest quality and environmental standards. The design of the hollow clay infill block, with vertical partitions and triangular reinforcements at the top and bottom, provides optimum resistance. This feature, along with a near zero breakage rate, make the hollow clay infill block for ribbed slabs an essential constructive element in any high quality and energy-efficient building. The main advantages of ribbed floor slabs over solid concrete slabs are: [LIST] Savings in structural steel, due to its lighter weight Lower labour costs due to its easy assembly Better acoustic and thermal insulation Safe usage due to its high mechanical resistance Excellent adherence with gypsum, mortar and concrete [/LIST] The 25 x 70 cm infill block is especially recommended for deep slabs with high mechanical resistance requirements.
-
Ytong France CARREAU 15 U=0,7 W/(m²K) ep=150 mm
|Ytong CARREAU 15 non load bearing wall has exceptional thermal, mechanical and fire protection properties. It is intended for the realization of - internal walls for single-family houses and multi-familly and tertiary buildings - internal walls in wet rooms - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects.
-
Ytong France COMPACT 20 U=0,49 W/(m²K) ep=200 mm
|The Ytong COMPACT 20 wall has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The Ytong COMPACT 20 wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
Ytong France COMPACT 20+ITI R=5,16 U=0,19 W/(m²K) ep=328 mm
|The Ytong COMPACT 20 wall with internal insulation (ITI) has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The Ytong COMPACT 20 + ITI wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
Ytong France COMPACT 22,5 U=0,44 W/(m²K) ep=225 mm
|The Ytong COMPACT 22,5 wall has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The Ytong COMPACT 22,5 wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
Ytong France COMPACT 22,5+ITI R=4,78 U=0,21 W/(m²K) ep=333 mm
|The Ytong COMPACT 22,5 wall with internal insulation (ITI) has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The Ytong COMPACT 22,5 + ITI wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
Ytong France VERTI 25 U=0,45 W/(m²K) ep=250 mm
|The Ytong S-BBC 25 wall has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The Ytong S-BBC 25 wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
Ytong France VERTI 25+ITI R=4,74 U=0,21 W/(m²K) ep=358 mm
|The Ytong S-BBC 25 wall with internal insulation (ITI) has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The Ytong S-BBC 25 + ITI wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
Ytong France THERMO 25 R=2,95 U=0,33 W/(m²K) ep=250 mm
|The Ytong THERMO 25 wall has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The Ytong THERMO 25 wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
Ytong France THERMO 25+ITI R=5,52 U=0,18 W/(m²K) ep=358 mm
|The Ytong THERMO 25 wall with internal insulation (ITI) has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The Ytong THERMO 25 + ITI wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
Ytong France THERMO 30 R=3,50 U=0,28 W/(m²K) ep=300 mm
|The Ytong THERMO 30 wall has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The Ytong THERMO 30 wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
Ytong France THERMO 36,5 R=4,23 U=0,23 W/(m²K) ep=365 mm
|The Ytong THERMO 36,5 wall has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The Ytong THERMO 36,5 wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
Ytong France THERMO 42 R=4,84 U=0,20 W/(m²K) ep=420 mm
|The Ytong THERMO 42 wall has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The Ytong THERMO 42 wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
Ytong France VERTI 20 U=0,61 W/(m²K) ep=200 mm
|The Ytong VERTI 20 wall has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The Ytong VERTI 20 wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
Ytong France VERTI 20+ITI R=4,17 U=0,24 W/(m²K) ep=308 mm
|The Ytong VERTI 20 wall with internal insulation (ITI) has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The Ytong VERTI 20 + ITI wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
Sunworker Screen Fabric
|Fabric designed for solar protection (especially "screen") OUTSIDE or INSIDE. SUNWORKER blocks up to 94% of the heat, and preserve in the same time visual contact to outside and use of natural daylight Designed to meet new needs in terms of solar protection, Sunworker combines transparency, resistance and fineness with visual and thermal comfort. Made using the Rachel Trameur method of weaving, it boasts excellent mechanical strength. Its regular grain and micro-aerated look ensure transparency that filters both sun light and solar heat. The fact that it has passed numerous European fire-resistance tests (M1, B1, Class1) makes it an ideal fabric for use in locations frequented by the public. Sunworker M1 is available in 150 and 300 cm widths.
-
DE Ytong Double Layer Wall U=0,14 W/(m²K) d=470 mm
|Double-shell brickwork – at the inside with Ytong and at the outside with Silka: If the matter is an outer shell with heavy-duty weatherproofing, you traditionally stick to a well approved double-shell brickwork. The outer shell – the Silka faced brickwork – meets structural-physical demands as well as high mechanical requirements. Due to the facade’s persistence and low amount of maintenance, those double-shell brickworks pay off fine in the long run. Between the bearing inner Ytong-shell and the weather-resistant outer Silka-shell, there’s room for additional functional layers.
-
HEWI Push/pull handle set 162XADG06
|System 162 push/pull handle set for equipping doors or emergency exits For emergency exits: Approval to EN 179 in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634 and 9 mm square spindle. Suitable as operating element on doors to DIN 18040, with accessibility function within operating range at 850 mm above FFL. Handle made of a stainless steel tube, diameter 30 mm, straight handle with straight connection, height 450 mm, width 124 mm, satin surface, backplates made of metal with polyamide cap, maintenance-free plain bearings, mechanical adjustment for the pull handle. Fast installation on the door due to already preassembled pull handles on the bottom section. Installation in pairs, function in opening direction - push, function in opposite direction - pull, with continuous spindle. Classification: spindle 8 mm - no classification spindle 9 mm Designed and tested for projects, classification to EN 179 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class 0, A or B Safety - personal protection: Class 1 Corrosion protection: Class 3 Security - burglary protection: Class 2 Projection of operating element: Class 1 Type of operation: B Field of door application: Class A, B, C or D The classification results only in connection with the lock according to EN 179, for example, BKS, Fuhr or Fliether The selected combinations are assigned freely and do not have to take on a lock manufacturer. For more information, contact HEWI or the lock manufacturer! Article no.: HEWI 162XADG06
-
HEWI Push/pull handle set FSDG550-08
|System 111 push/pull handle set Handle made of polyamide, with steel core diameter 33 mm, closed oval, height 400 mm, width 105 mm, high polished, backplates made of metal with polyamide cap, maintenance-free plain bearings, mechanical adjustment for the pull handle. Fast installation on the door due to already preassembled pull handles on the bottom section. Suitable as operating element on doors to DIN 18040, with accessibility function within operating range at 850 mm above FFL. Contrasting design in coloured polyamide. Installation in pairs, function in opening direction - push, function in opposite direction - pull, with continuous spindle. Classification key: spindle 8 mm - no classification spindle 9 mm Designed and tested for projects, classification to EN 179 Category of use: Class 3 Durability: Class 7 Door weight: Class 6 Use on smoke/fire doors: Class 0. A or B Safety personal security: Class 1 Corrosion resistance: Class 3 Security: Class 2 Security - Burglary protection: Class 1 Type of operation: B Field of door application: Class A, B, C or D The classification results only in connection with the lock according to EN 179, for example, BKS, Fuhr or Fliether The selected combinations are assigned freely and do not have to take on a lock manufacturer. For more information, contact HEWI or the lock manufacturer! Article no.: HEWI FSDG550.08
-
Thermoreal®-Gebrik®
|Thermoreal®-Gebrik® is a 1m², 60mm thick panel made of clay bricks elements bonded to insulating polyurethane foam. It is fixed to the concrete, masonry or wood frame by mechanical fasteners and may be completed with additional insulation - up to 220mm thick – to reach a high thermal resistance, depending the insulated material chosen. With its wide range of colours, in smooth or sanded finish, it allows give the aesthetics of an authentic wall brick and taking the advantage of an efficient and economical system of external thermal insulation.
-
Ultra-resistant photocatalytic pavements - i.active CARGO
|Constructive solution with photocatalytic activity (decontamination) for ultra-resistant asphalt pavements. i.active CARGO is a cementitious mix based on the TX Active® technology and admixtures, specifically designed for achieving bituminous pavements with high mechanical performance and activated by photocatalysis, the product shows depolluting properties, helping to reduce the air pollution/contamination. i.active CARGO is mixed with water, obtaining a self-percolating slurry, to fill open graded asphalts to obtain semi-rigid pavements. Thanks to the special formulation of this smooth and high-flow grout, you can obtain pavements with high punching shear resistance, through percolation in open graded asphalts where the interconnected void content varies from 18 to 22%, even up to 30%. i.active CARGO can be easily pumped and percolated can penetrate the full layer depth of asphalt with a high void content without the need for mechanical vibration. No construction joints are required to control shrinkage. The combination "open graded asphalt + i.active CARGO" allows obtaining monolithic floors with the same characteristics and roading comfort as bituminous asphalt and, in addition, compressive strength of a concrete pavement, an ultraresistant pavement. It also provides high chemical resistance, e.g. to solvents and hydrocarbons.
-
Ultra-resistant pavements - i.tech CARGO
|Constructive solution for ultra-resistant asphalt pavements. i.tech CARGO is a cementitious mix based, specifically designed for achieving bituminous pavements with high mechanical performance. It is mixed with water, obtaining a self-percolating slurry, to fill open graded asphalts to obtain semi-rigid pavements. Thanks to the special formulation of this smooth and high-flow grout, you can obtain pavements with high punching shear resistance, through percolation in open graded asphalts where the interconnected void content varies from 18 to 22%, even up to 30%. i.tech CARGO can be easily pumped and percolated can penetrate the full layer depth of asphalt with a high void content without the need for mechanical vibration. No construction joints are required to control shrinkage. The combination "open graded asphalt + i.tech CARGO" allows obtaining monolithic floors with the same characteristics and road comfort as bituminous asphalt and, in addition, compressive strength of a concrete pavement, an ultraresistant pavement. It also provides high chemical resistance, e.g. to solvents and hydrocarbons.
-
Natural pavements - i.pro STABEX
|Natural soil stabilizer for roads and paths. i.pro STABEX is an ecological product, composed of natural hydraulic lime and a mineral hydraulic binder. Its use allows the improvement and stabilization of soils in a natural way. Natural hydraulic lime drops water content of the soil, flocculates clays, eases compaction and waterproofs the soil while maintains a sufficient porosity that allows it to "breath". The hydraulic binder improves its mechanical properties, increases the bearing capacity and thus allows a rapid circulation. - i.pro STABEX avoids the presence of dust in summer, as well as mud and ruts in winter, on roads and sidewalks - i.pro STABEX guarantees excellent ride comfort whatever the seasons. - i.pro STABEX preserves both the appearance and the color of the treated soils and sands, respecting the native varieties, thus preserving their natural appearance. - i.pro STABEX provides simple and easy maintenance of the floors, allowing to perform the same with a simple raking of the ground. It also reduces the growth of weeds. - i.pro STABEX is reversible. In case of a partial treatment, the soil can be remixed with the product and, after a new compaction, it will return to its original state. - i.pro STABEX provides a high resistance to erosion (even on gentle slopes) thanks to a high cohesion of the material. - i.pro STABEX limits the shrinkage due to its slow setting and hardening. When dosage over 6% in mass, for a most resistant pavement, it is recommend the use of fibers and ask to the product technical assistant of your area - i.pro STABEX allows to repair the problems of durability which appear with other stabilization systems, regardless of the size of the area to be restored, from small patches to large surfaces.
-
KNAUF Therm EXPERT FLOOR HEATING 200 λ 33
|<p>KNAUF Therm EXPERT FLOOR HEATING 200 λ 33 expanded polystyrene panels are marked with the following code, according to PN-EN 13163:2012 + A1:2015 standard: </p> <p>EPS-EN 13163-T(1)-L(2)-W(2)-S(2)-P(5)-BS250-CS(10)200-DS(N)2-DS(70,-)1-DLT(1)5 </p> <p>KNAUF Therm EXPERT FLOOR HEATING 200 λ 33 (EPS 200) insulation panels are manufactured in the form of finished goods in the innovative shape moulding technology. Owing to innovative production process they feature excellent insulation characteristics and very good working properties. They are intended for use as a broadly defined floor thermal insulation in water underfloor heating systems. </p> <p>&nbsp;<strong>APPLICATION</strong></p> <p>KNAUF Therm EXPERT FLOOR HEATING 200 λ 33 panels are intended for use as floor thermal insulation and for installation of heating pipes in water underfloor heating systems. They are designed for quick and easy installation of the pipes. Panels are made of dense expanded polystyrene and are therefore not susceptible to moisture absorption. Because of their versatility they may be applied in housing construction and public utility facilities. </p> <ul><li>The system of protrusions allows for a quick and easy installation of heating pipes.<br>The shape of protrusions ensures stability of heating pipes after they have been laid, without the necessity of using any additional materials to hold them in place.&nbsp;</li><li>Protrusions that hold the heating pipes in place.&nbsp;</li><li>Innovative edge profiles allow for tight and durable connection of the panels.</li><li>High thermal resistance (λD thermal conductivity = 0,033 W/(mK) – excellent thermal insulating power</li></ul> <p></p> <p><strong>INSTALLATION GUIDE FOR KNAUF Therm EXPERT FLOOR HEATING 200 λ 33 PANELS</strong></p> <p>Steps of laying water underfloor heating system with KNAUF Therm FLOOR HEATING 200 λ 33 panels&nbsp;</p> <p>Steps of laying the water underfloor heating system depend on the location of the room in which it is going to be installed.</p> <p>1. Applying the so called additional insulation (if the underfloor heating is installed on soil or over an unheated room) – KNAUF Therm expanded polystyrene panels (KNAUF Therm TECH Dach/Podłoga λ 37, KNAUF Therm PRO Dach/Podłoga EPS 100 λ 36, KNAUF Therm PRO Parking EPS 200 λ 33)&nbsp;<br>2. Gluing in the edge strips at the walls and pillars (if the latter are present in the room that the water underfloor heating is installed in)<br>3. Laying down the KNAUF Therm EXPERT FLOOR HEATING 200 λ 33 professional panels intended for water underfloor heating.<br>4. Laying the heating pipes on the KNAUF Therm EXPERT FLOOR HEATING 200 λ 33 panel<br>(without the necessity of using any other materials to hold the heating pipes in place)<br>5. Priming the heating pipes with water.<br>6. Making the so called heating slab.<br>7. Covering the pipes with anhydrite or cement screed (it can be KNAUF FE 50 cement screed) – up to the height of “protrusions” on the KNAUF Therm EXPERT FLOOR HEATING 200 λ 33 panel.<br>8. Releasing air bubbles from the screed – the heating pipes have to be completely covered with screed without the so called “air pockets” under the pipes.&nbsp;<br>9. Surface levelling – if necessary – using self levelling KNAUF FE 50 screed</p> <p><strong>ATTENTION</strong><br>Do not use the panels in direct contact with substances destructive to polystyrene, e.g. organic solvents (acetone, Nitro, benzene etc.).&nbsp;</p> <p><strong>PACKAGING, STORAGE, TRANSPORT</strong></p> <p>KNAUF Therm EXPERT FLOOR HEATING 200 λ 33 expanded polystyrene panels are only supplied in original manufacture’s packaging, i.e. that of KNAUF Industries Polska Sp. z o.o.&nbsp;</p> <p>The product packaging contains information on: product name, manufacturer’s name, production date, relevant Polish Standard number i.e. PN-EN 13163:2012 + A1:2015, a code in accordance with the standard and declared technical parameters</p> <p>KNAUF Therm EXPERT FLOOR HEATING 200 λ 33 expanded polystyrene panels should be stored in a manner protecting them against mechanical damage and atmospheric conditions.&nbsp;</p> <p><br></p> <p><br></p>
-
ES Ytong Internal Wall R=1,47 m²K/W d=156 mm Ytong TABIQUE 15/500
|Ytong TABIQUE 15 non load bearing wall has exceptional thermal, mechanical and fire protection properties. It is intended for the realization of - internal walls for single-family houses and multi-familly and tertiary buildings - internal walls in wet rooms - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects.
-
ES Ytong Exterior Wall + ITI R=4,89 m²K/W d=328 mm Ytong BLOQUE 20/450
|The Ytong BLOQUE 20/450 wall with internal insulation (ITI) has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The Ytong BLOQUE 20/450 + ITI wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
ES Ytong Exterior Wall + ITI R=3,95 m²K/W d=308 mm Ytong BLOQUE 20/550
|The Ytong BLOQUE 20/550 wall with internal insulation (ITI) has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The Ytong BLOQUE 20/550 + ITI wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
ES Ytong Exterior Wall + ITI R=4,57 m²K/W d=333 mm Ytong BLOQUE 22,5/450
|The Ytong BLOQUE 22,5/450 wall with internal insulation (ITI) has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The Ytong BLOQUE 22,5/450 + ITI wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
ES Ytong Exterior Wall + ITI R=4,52 m²K/W d=358 mm Ytong BLOQUE 25/500
|The Ytong BLOQUE 25/500 wall with internal insulation (ITI) has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The Ytong BLOQUE 25/500 + ITI wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
ES Ytong Exterior Wall + ITI R=5,30 m²K/W d=358 mm Ytong BLOQUE 25/350
|The Ytong BLOQUE 25/350 wall with internal insulation (ITI) has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The Ytong BLOQUE 25/350 + ITI wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
ES Ytong Monolithic Wall R=3,53 m²K/W d=318 mm Ytong BLOQUE 30/350
|The Ytong BLOQUE 30/350 wall has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The Ytong BLOQUE 30/350 wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
ES Ytong Monolithic Wall R=4,25 m²K/W d=383 mm Ytong BLOQUE 36,5/350
|The Ytong BLOQUE 36,5/350 wall has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The Ytong BLOQUE 36,5/350 wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
ES Ytong Monolithic Wall R=4,86 m²K/W d=438 mm Ytong BLOQUE 42/350
|The Ytong BLOQUE 42/350 wall has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The Ytong BLOQUE 42/350 wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
ES Ytong Internal Wall R=2,09 m²K/W d=206 mm Ytong BLOQUE 20/450
|The Ytong BLOQUE 20/450 wall has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The monolithic Ytong BLOQUE 20/450 wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
ES Ytong Internal Wall R=1,70 m²K/W d=206 mm Ytong BLOQUE 20/550
|The Ytong BLOQUE 20/550 wall has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The monolithic Ytong BLOQUE 20/550 wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
ES Ytong Internal Wall R=2,31 m²K/W d=231 mm Ytong BLOQUE 22,5/450
|The Ytong BLOQUE 22,5/450 wall has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The monolithic Ytong BLOQUE 22,5/450 wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
ES Ytong Internal Wall R=2,27 m²K/W d=256 mm Ytong BLOQUE 25/500
|The Ytong BLOQUE 25/500 wall has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The monolithic Ytong BLOQUE 25/500 wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
ES Ytong Monolthic Wall R=2,97 m²K/W d=268 mm Ytong BLOQUE 25/350
|The Ytong BLOQUE 25/350 wall has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The monolithic Ytong BLOQUE 25/350 wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.
-
High chemical resistant waterproofing and protection 100% polyurea system - MasterSeal 6689
|Primer: MasterSeal P 684 primer for the application of waterproofing membranes on aluminum, cooper, stainless steel and other non-ferrous metals Primer: MasterSeal P 698 primer for application of membranes on bituminous sheets Primer: MasterSeal P 617 A general purpose, non-solvented, two component epoxy resin based primer for dry concrete surfaces. Primer: MasterSeal P 385 Epoxy-cement primer for the application of membranes on humid mineral absorbent and non absorbent substrates Primer: MasterSeal P 682 primer for application of membranes on glass and vitrified ceramic tile substrates Primer: MasterSeal P 385 Epoxy-cement primer for the application of membranes on humid mineral absorbent and non absorbent substrates Primer: MasterSeal P 681 primer for the application of membranes on steel (not stainless) substrates. Membrane: MasterSeal M 689 Two component waterproofing polyurea membrane with high chemical and mechanical resistance.
-
ATRIA LUMINARIE KP
|<p>Luminaire for installation at significant heights and in large indoor spaces. The frame, manufactured in aluminium, in addition to the sink is the support for the electronic system and the optical group. The combined use of specific lenses and aluminium-coated reflectors ensure optimum performance in open area lighting and escape routes. Supports AC and DC voltage. Suitable for centralised AC/DC power systems. Suitable for mounting on walls or ceilings. Includes: Accessory for adjusting the angle.</p><p>The accessory KP** enables wall- or ceiling-mounting as its angle is adjusted (max. 90 degrees) using a ball joint with mechanical interlocking.<br></p>
-
ATRIA NF LSC KP
|<p>*Available only in France*<br></p> <p>Luminaire for installation at significant heights and in large indoor spaces. The frame, manufactured in aluminium, in addition to the sink is the support for the electronic system and the optical group. The combined use of specific lenses and aluminium-coated reflectors ensure optimum performance in open area lighting and escape routes. Supports AC and DC voltage. Suitable for centralised AC/DC power systems. Suitable for mounting on walls or ceilings. Includes: Accessory for adjusting the angle.</p> <p>The accessory KP** enables wall- or ceiling-mounting as its angle is adjusted (max. 90 degrees) using a ball joint with mechanical interlocking.</p>
-
ATRIA KP
|Self-contained emergency luminaire for installation at significant heights and in large indoor spaces. The frame, manufactured in aluminium, in addition to the sink is the support for the electronic system, the batteries and the optical group. The combined use of specific lenses and aluminium-coated reflectors ensure optimum performance in open area lighting and escape routes. Suitable for mounting on walls or ceilings. Includes: Accessory for adjusting the angle. The accessory KP** enables wall- or ceiling-mounting as its angle is adjusted (max. 90 degrees) using a ball joint with mechanical interlocking.
-
ATRIA NF KP
|<p>*Available only in France*<br></p> <p>Self-contained emergency luminaire for installation at significant heights and in large indoor spaces. The frame, manufactured in aluminium, in addition to the sink is the support for the electronic system, the batteries and the optical group. The combined use of specific lenses and aluminium-coated reflectors ensure optimum performance in open area lighting and escape routes. Suitable for mounting on walls or ceilings. Includes: Accessory for adjusting the angle.<br>The accessory KP** enables wall- or ceiling-mounting as its angle is adjusted (max. 90 degrees) using a ball joint with mechanical interlocking.</p>
-
KNAUF Therm EXPERT HYDRO EPS 100 λ 36
|<p>KNAUF Therm EXPERT&nbsp; Hydro EPS 100 λ 36 are produced in compliance with the PN-EN 13163:2012+A1:2015 harmonized European standard, according to which they have the following code:</p> <p>EPS – EN 13163-T(1)-L(3)-W(3)-S(5)-P(5)-BS150-CS(10)100-DS(N)2-DS(70,-)1</p> <p>KNAUF Therm EXPERT&nbsp; Hydro EPS 100 λ 36 boards are manufactured in a double polystyrene expansion process, owing to it great thermal properties and the application facility.<br></p> <p>KNAUF Therm EXPERT Hydro EPS 100 λ 36 polystyrene boards are recommended for use in places where the payloads do not exceed 3000 kg / m<sup>2</sup>.</p> <p><strong>For proper use of panels on underground elements of the object, a functional anti-moisture insulation should be made on their surface.</strong></p> <p>PURPOSE</p> <p>Thermal insulation of underground construction elements<br>Protection of waterproofing against mechanical damage<br>Drainage (along with a nonwoven fabric)<br>Thermal insulation of plinths in the ETICS (formerly "light-wet" or<br>BSO)<br>Elimination of linear thermal bridges<br>Thermal insulation of terraces, also "green" (no vehicular traffic)</p> <p><strong>Special waterproof properties:</strong></p> <p>Plates produced from the mold, not cut from the block, which guarantees their high repeatability and dimensionality as well as increased hydrophobicity<br>LARGE PANEL DIMENSIONS 1200 x 600 mm - significantly accelerate assembly<br>A small-sized grid and scale on the surface makes it easier to cut and place plates<br>The drainage duct system guarantees drainage of water and moisture<br>The boards are resistant to humus acids in the soil.</p>
-
Polyurethane medium to low duty industrial floor system, antistatic, low emission, smooth coating - MasterTop 1324 AS/ESD
|MasterTop 1324 is a hard wearing, elastomeric, crack bridging, low emission and decorative matt polyurethane flooring system which can be applied with smooth or slip resistant finishes to a large range of substrates. MasterTop 1324 AS is a antistatic, low emission, polyurethane flooring system, with smooth coating, for industrial floors with low to medium loads, where some crack bridging properties and especial performance of antistatic are desired (EN 1081). MasterTop 1324 ESD provided also an especial performance of ESD (IEC 61340-5-1). Typical applications: computer areas, laboratories, operating theatres, electronic and pharmaceutical industry etc. • Low emission • Excellent mechanical properties • Abrasion resistant • Statical crack bridging • Seamless • Easy to clean and maintain • Anti-static properties • Color freedom • Water based, environmentally friendly • Improves scratch and wear resistance • ESD properties (IEC 61340-5-1)
-
Polyurethane flooring system, resilient, crack bridging - MasterTop 1324 / 1324 R
|MasterTop 1324 is a hard wearing, elastomeric, crack bridging, low emission and decorative matt polyurethane flooring system which can be applied with smooth or slip resistant finishes to a large range of substrates. MasterTop 1324 series offers a comprehensive portfolio of solutions for a wide variety of applications ranging from classical industrial floor coverings to special slip resistant flooring. The series feature durability, a joint-less, seamless design and excellent cleaning or antibacterial properties. MasterTop 1324 series can be applied where aggressive impacts, severe mechanical loads and high abrasion resistance is required: for example production areas, warehouses and technology rooms etc. • Excellent self-levelling properties • Excellent mechanical properties • Abrasion resistant • Statical crack bridging • Seamless • Easy to clean and maintain • Hygienic • Color freedom • Hard wearing • Available in smooth (MasterTop 1324) and anti-slip (MasterTop 1324 R) finishes
-
Epoxy based medium duty industrial flooring system - MasterTop 1273 AS / 1273 AS-R / 1273 ESD
|MasterTop 1273 AS is a medium load bearing, self leveling, low emission (AgBB conformity), anti-static epoxy system with a smooth finish. MasterTop 1273 ESD is used on medium duty industrial flooring when a smooth and ESD (IEC 61340-5-1) surface is required. MasterTop 1273 AS-R is a slip resistant, anti-static flooring epoxy system according to EN 1081 with high mechanical load capacity. The systems are ideal for floors in electronic industry, clean rooms, pharmaceutical and space industry etc. BENEFITS • Low emission • Self-leveling • Seamless • Excellent maintenance and cleaning properties reduces cleaning costs • Easy to apply • Hygienic • Color freedom • Abrasion resistant • Exhibits excellent mechanical strength and anti-static properties • Extremely resistant to water, sea and waste water, as well as resistant to a variety of alkalis, diluted acids, brine, mineral oils, lubricants and fuels
-
Epoxy based medium duty industrial flooring system - MasterTop 1273 S / 1273 S-AS
|MasterTop 1273 S is a light to medium load bearing, low emission, epoxy system with structured surface. MasterTop 1273 S-AS is used on medium duty industrial flooring when an anti-static surface with anti-slip properties is required. The systems are ideal for floors in warehouse, production halls, electronic industry, clean rooms, pharmaceutical and space industry etc. BENEFITS • Low emission • Comfortable • Seamless • Easy to clean and maintain despite the structured surface • Abrasion resistant • Exhibits excellent mechanical strength • Anti-static properties • Easy to apply • Conductive floor coating • Hygienic • Color freedom • Extremely resistant to water, sea and waste water, as well as resistant to a variety of alkalis, diluted acids, brine, mineral oils, lubricants and fuels
-
Epoxy based industrial waterproof flooring system - MasterTop 1278 / 1278 R
|MasterTop 1278 is a crack bridging, homogeneous epoxy coating for secondary containment. MasterTop 1278 R is a slip resistant, crack bridging, water-proofing epoxy flooring system for areas where potential ground water pollutants are manufactured, handled or used. DIBt approval of building authorities according to § 19 WHG. The systems are ideal for floors in industrial floors, secondary containment exposed to mechanical wear and chemicals when anti-slip properties are required. BENEFITS • High resistance to chemicals • Exhibits excellent mechanical strength • Abrasion resistant • Static crackbridging • Good adhesion to non-porous substrates • Easy to clean and maintain • Easy to apply • Extremely resistant to water, sea and waste water, as well as resistant to a variety of alkalis, diluted acids, brine, mineral oils, lubricants and fuels • Hygienic • Color freedom
-
Epoxy based industrial waterproof flooring system, anti-static - MasterTop 1283 AS / 1278 AS-R
|MasterTop 1278 AS is a crack bridging, homogeneous anti-static epoxy coating for secondary containment according § 19 WHG with approval of building authorities. MasterTop 1278 AS-R is a slip resistant, crack bridging, electrostatic (according to EN 1081), waterproofing epoxy flooring system for areas where potential ground water pollutants are manufactured, handled or used. The systems are ideal for floors in industrial, slip resistant and electrostatic floors or secondary containment exposed to medium mechanical wear and chemicals. BENEFITS • Anti-static, conductive according to EN 1081 • High resistance to chemicals • Exhibits excellent mechanical strength • Abrasion resistant • Static crackbridging • Good adhesion to non-porous substrates • Easy to clean and maintain • Easy to apply • Extremely resistant to water, sea and waste water, as well as resistant to a variety of alkalis, diluted acids, brine, mineral oils, lubricants and fuels • Hygienic • Color freedom
-
Clothing locker H201
|Full height clothing locker. Interior consists of: Shelf, clothing rail with one anchor hook. The locker is available with either a flat or sloping roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. The floor in the locker is flat without any obstuctions and no threshold in order to make the cleaning as easy as possible. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate. Where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Clothing locker H301
|Full height clothing locker. Interior consists of: Shelf, clothing rail with two anchor hooks and a towel hook on the inside of the door (when choosing std. door). The locker is available with either a flat or sloping roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. The floor in the locker is flat without any obstuctions and no threshold in order to make the cleaning as easy as possible. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate. Where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Clothing locker H401
|Full height clothing locker. Interior consists of: Shelf, clothing rail with two anchor hooks and a towel hook on the inside of the door (when choosing std. door). The locker is available with either a flat or sloping roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. The floor in the locker is flat without any obstuctions and no threshold in order to make the cleaning as easy as possible. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate. Where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Clothing locker H302
|Full height clothing locker. Interior consists of: Clothing rail with two anchor hooks / department and a towel hook on the inside of the door (when choosing std. door). The locker is available with either a flat or sloping roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. The floor in the locker is flat without any obstuctions and no threshold in order to make the cleaning as easy as possible. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate. Where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Clothing locker H402
|Full height clothing locker. Interior consists of: Clothing rail with two anchor hooks / department and a towel hook on the inside of the door (when choosing std. door). The locker is available with either a flat or sloping roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. The floor in the locker is flat without any obstuctions and no threshold in order to make the cleaning as easy as possible. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate. Where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Clothing locker H221
|Full height double clothing locker. Consisting of two lockers in one. For those who need a locker for both work and leisure clothes. Interior in left locker consists of: Shelf, clothing rail with one anchor hook. Interior in right locker consists of: Shelf, clothing rail with one anchor hook. The locker is available with either a flat or sloping roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. The floor in the locker is flat without any obstuctions and no threshold in order to make the cleaning as easy as possible. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate. Where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Clothing locker H321
|Full height double clothing locker. Consisting of two lockers in one. For those who need a locker for both work and leisure clothes. Interior in left locker consists of: Shelf, clothing rail with two anchor hooks and a towel hook on the inside of the door (when choosing std. door). Interior in right locker consists of: Shelf, clothing rail with one anchor hook. The locker is available with either a flat or sloping roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. The floor in the locker is flat without any obstuctions and no threshold in order to make the cleaning as easy as possible. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate. Where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Clothing locker H331
|Full height double clothing locker. Consisting of two lockers in one. For those who need a locker for both work and leisure clothes. Interior in left locker consists of: Shelf, clothing rail with two anchor hooks and a towel hook on the inside of the door (when choosing std. door). Interior in right locker consists of: Shelf, clothing rail with two anchor hooks and a towel hook on the inside of the door (when choosing std. door). The locker is available with either a flat or sloping roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. The floor in the locker is flat without any obstuctions and no threshold in order to make the cleaning as easy as possible. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate. Where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Clothing locker H421
|Full height double clothing locker. Consisting of two lockers in one. For those who need a locker for both work and leisure clothes. Interior in left locker consists of: Shelf, clothing rail with two anchor hooks and a towel hook on the inside of the door (when choosing std. door). Interior in right locker consists of: Shelf, clothing rail with one anchor hook. The locker is available with either a flat or sloping roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. The floor in the locker is flat without any obstuctions and no threshold in order to make the cleaning as easy as possible. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate. Where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Clothing locker H431
|Full height double clothing locker. Consisting of two lockers in one. For those who need a locker for both work and leisure clothes. Interior in left locker consists of: Shelf, clothing rail with two anchor hooks and a towel hook on the inside of the door (when choosing std. door). Interior in right locker consists of: Shelf, clothing rail with two anchor hooks and a towel hook on the inside of the door (when choosing std. door). The locker is available with either a flat or sloping roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. The floor in the locker is flat without any obstuctions and no threshold in order to make the cleaning as easy as possible. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate. Where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Clothing locker H441
|Full height double clothing locker. Consisting of two lockers in one. For those who need a locker for both work and leisure clothes. Interior in left locker consists of: Shelf, clothing rail with two anchor hooks and a towel hook on the inside of the door (when choosing std. door). Interior in right locker consists of: Shelf, clothing rail with two anchor hooks and a towel hook on the inside of the door (when choosing std. door). The locker is available with either a flat or sloping roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. The floor in the locker is flat without any obstuctions and no threshold in order to make the cleaning as easy as possible. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate. Where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Clothing locker H3z2
|Full height Z-locker. Interior in the top compartment consists of: Clothing rail with two anchor hooks. Interior in the lower compartment consists of: Clothing rail with two anchor hooks. The locker is available with either a flat or sloping roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. The floor in the locker is flat without any obstuctions and no threshold in order to make the cleaning as easy as possible. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate. Where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Clothing locker H4z2
|Full height Z-locker. Interior in the top compartment consists of: Clothing rail with two anchor hooks. Interior in the lower compartment consists of: Clothing rail with two anchor hooks. The locker is available with either a flat or sloping roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. The floor in the locker is flat without any obstuctions and no threshold in order to make the cleaning as easy as possible. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate. Where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Clothing locker H3z1
|Full height Z-locker. Interior in the top compartment consists of: Clothing rail with two anchor hooks. Interior in the lower compartment consists of: Clothing rail with two anchor hooks. The locker is available with either a flat or sloping roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. The floor in the locker is flat without any obstuctions and no threshold in order to make the cleaning as easy as possible. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate. Where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Clothing locker H4z1
|Full height Z-locker. Interior in the top compartment consists of: Clothing rail with two anchor hooks. Interior in the lower compartment consists of: Clothing rail with two anchor hooks. The locker is available with either a flat or sloping roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. The floor in the locker is flat without any obstuctions and no threshold in order to make the cleaning as easy as possible. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate. Where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Clothing locker H33b1
|Full height changing room locker consisting of two lockers in one. For those who need a space for both work and leisure clothes. One of the lockers is without door. Interior in left locker consists of: Shelf, clothing rail with two anchor hooks. Interior in right locker consists of: Shelf, clothing rail with two anchor hooks and a towel hook on the inside of the door (when choosing std. door). The locker is available with either a flat or sloping roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. The floor in the locker is flat without any obstuctions and no threshold in order to make the cleaning as easy as possible. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate. Where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Clothing locker M301
|Medium high clothing locker. Interior consists of: Shelf, clothing rail with two anchor hooks and a towel hook on the inside of the door (when choosing std. door). The locker is available with flat roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. The floor in the locker is flat without any obstuctions and no threshold in order to make the cleaning as easy as possible. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate. Where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Clothing locker M401
|Medium high clothing locker. Interior consists of: Shelf, clothing rail with two anchor hooks and a towel hook on the inside of the door (when choosing std. door). The locker is available with flat roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. The floor in the locker is flat without any obstuctions and no threshold in order to make the cleaning as easy as possible. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate. Where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Clothing locker L301
|Low height clothing locker. Interior consists of: Clothing rail with two anchor hooks and a towel hook on the inside of the door (when choosing std. door). The locker is available with flat roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. The floor in the locker is flat without any obstuctions and no threshold in order to make the cleaning as easy as possible. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate. Where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Clothing locker L401
|Low height clothing locker. Interior consists of: Clothing rail with two anchor hooks and a towel hook on the inside of the door (when choosing std. door). The locker is available with flat roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. The floor in the locker is flat without any obstuctions and no threshold in order to make the cleaning as easy as possible. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate. Where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Storage locker H303
|Full height storage locker with three compartments. The locker is available with either a flat or sloping roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Storage locker H403
|Full height storage locker with three compartments. The locker is available with either a flat or sloping roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Storage locker H304
|Full height storage locker with four compartments. The locker is available with either a flat or sloping roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Storage locker H404
|Full height storage locker with four compartments. The locker is available with either a flat or sloping roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Storage locker H305
|Full height storage locker with five compartments. The locker is available with either a flat or sloping roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Storage locker H405
|Full height storage locker with five compartments. The locker is available with either a flat or sloping roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Storage locker H412
|Full height storage locker with twelve compartments. This locker is also available with power outlets in each compartment. The locker is available with either a flat or sloping roof and is equipped with door Steel. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. We have a vast variety of legs, sockels, benches to choose from. A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our storage lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Storage locker M303
|Medium height storage locker with three compartments. The locker is available with flat roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Storage locker M403
|Medium height storage locker with three compartments. The locker is available with flat roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Storage locker M409
|Medium height storage locker with nine compartments. This locker is also available with power outlets in each compartment. The locker is available with a flat roof and is equipped with door Steel. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. We have a vast variety of legs, sockels, benches to choose from. A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our storage lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Storage locker L302
|Low height storage locker with two compartments. The locker is available with flat roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Storage locker L402
|Low height storage locker with two compartments. The locker is available with flat roof. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. We have a vast variety of legs, sockels, benches to choose from. Furthermore, a great number of different doors in both steel and laminate where you as customer can choose standard or special colors or motives (fotolaminate). A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our clothing lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
-
Storage locker L406
|Low height storage locker with six compartments. This locker is also available with power outlets in each compartment. The locker is available with either a flat roof and is equipped with door Steel. This locker has a fully welded body with thick steel material for maximum strength and has extra durable powder coating on all surfaces. We have a vast variety of legs, sockels, benches to choose from. A number of different locks, both mechanical and electrical. We also supply decorative end panels in laminate if you desire. Our storage lockers are (as all our lockers) GS approved which guarantees you a high quality, durability and modern construction methods.
