Different types of WC with minimal space. Editable with MEP Modeler.

Different types of corner WC with minimal space. Editable with MEP Modeler.

2D only.

Different types of WC with minimal space. Editable with MEP Modeler.

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

With proven and reliable high performance sterilizing technology, the new Steelco autoclave’s chamber is made of AISI 316L stainless steel and a full jacket system for even steam/heat distribution. Versatility, easy handling and high performance with the low cost of ownership of a tabletop unit, to single or double door versions. • All in one compact solution for easy installation into existing rooms • EN 285 compliant: 3 process cycles and Bowie-Dick, Helix test cycles • 8 additional custom cycles • PED marking Stand upon request: 820mm/32.28” height stand, equipped with lockable doors Паровые настольные стерилизаторы VS TT L Steelco Главные особенности: Объемы камер 85 л и 94 л Встроенный электрический парогенератор Горизонтальная загрузка Паровые стерилизаторы STEELCO VS TT L имеют микропроцессорное управление с цветным сенсорным дисплеем 7» и независимой системой регистрации параметров. Сплошная рубашка камеры. Быстросъемные соединения. Глянцевая полировка (2 мкм) камеры и трубопроводов процесса. Обезжиривание и пассивация камеры и трубопроводов процесса. Встроенный термопринтер. Стерилизаторы имеют встроенные рабочие программы с температурами стерилизации: 121°С и 134°С, а также тестовые/сервисные программы: Нагрев, Бови-Дик и вакуумный тест на утечку. Область применения Паровые стерилизаторы STEELCO VS TT L предназначены для стерилизации различных материалов (пористых, материалов устойчивых к нагреву, оборудования, инструментов, посуды, клеток для животных и т.д.); жидкостей и сред в вентилируемых и укупоренных контейнерах; или деконтаминации материалов после лабораторного использования и т.д.

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -painonappi 69080 korvattu napilla 69083 -napit 69084, 69086 ja 69087 lisätty -installation fixture 91372 lisätty 01.09.2008 -initial release

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

ECOPRESS self-closing deck basin tap low spout Celite https://bimobject.com

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -painonappi 69080 korvattu napilla 69083 -napit 69084, 69086 ja 69087 lisätty -installation fixture 91372 lisätty 01.09.2008 -initial release

2D only.

In 2014 Christophe Pillet and Offecct launched the comfortable and timeless collection Ezy, which consists of a sofa, an easy chair, a barstool and a series of tables. Though, originally designed for the famous Pullman Paris Eiffel Tour Hotel, the new add

Freestanding shelving is available in single-sided and double-sided versions. L-stand set against the wall and T-stands can be freely positioned in the room. These stands can be delivered with sound absorbers in the start and secondary section. Two cassette plates capsules absorbers and binds together the stands. Is intended for shelves with 800-width. Please try with metal shelf Modern. Choose the color combination of the panels and powder coated colors from our catalog.

The easy chair Pal is designed by Claesson Koivisto Rune for the luxury hotel Knobs Hotel in Stockholm. The hotel’s 201 rooms are of varying sizes and one of the challenges for Claesson Koivisto Rune and Offecct in working with the hotel’s interior was to

<p>“The originality of the armchair is not only its ability to completely change the atmosphere of a lobby or lounge by simple means in the form of a seat and three different backs. But it also offers the possibility to easily change the upholstery and renew the armchair. As people work more in public places, the need for easy upgrades increases”, says Daniel Debiasi.<br><br>Shift is an exceptionally flexible armchair, through the different heights of the backs, allows everyone to both focus completely on their work and to rest completely. The backrests can be replaced and renewed as needed, according to Offecct Lifecircle. It also offers architects tools to create sustainable solutions. The seat is the same for all three designs.<br><br>Shift is upholstered with frame in moulded cold foam and lacquered legs.<br><br>Benefits & functions<br>- Can be upholstered in fabric or leather.<br>- The backrests can easily be changed and renewed.<br>-Is an exceptionally flexible armchair with the possibility of three different heights on the backrest.<br><br>The frame is available i black, silver or white lacquer alternative in Offecct Flexicolor.</p>

Cron combines classicism of a executive chair with all tasks chair features. Its moulded aluminium structure gives stability and refinement, while its circular structure gives an attractive, minimalist design. This chair stands up for the care and detail

Cron combines classicism of a executive chair with all tasks chair features. Its moulded aluminium structure gives stability and refinement, while its circular structure gives an attractive, minimalist design. This chair stands up for the care and detail

PRO - Wall-mounted basin or sink mixer with swivel spout. Handle for People with Reduced Mobility.

Pharmacy bulk storage. THIS TYPICAL INCLUDES: 4 Panel, Hard Npwr 53"H x 24"W; 12 Panel, Hard Npwr 85"H x 18"W; 1 Panel, Hard Power 85"H x 24"W; 3 Panel, Hard Npwr 85"H x 24"W; 2 Panel, Hard Power, 85"H x 48"W; 3 Panel, Hard Npwr 85"H x 48"W; 1 Open Panel Frame Npwr 85"H x 24"W; 1 Open Panel Frame Npwr 85"H x 48"W; 4 Conn, 2-Way 90 Deg Hard 84"H; 7 Conn, 3-Way 90 Deg Hard 84"H; 1 Duplex Rcp, 6/Pkg 1 Duplex Rcp, Dedicated 6/Pkg 1 Ceiling Pwr Entry, Pwr 85"H; 2 Work Surface, Lam 48"W; 36 Shelf Storage Display 24"W; 40 Shelf Storage Display 48"W; 1 Flip Dr Unit, Fab, W/Lock 48"W; 1 Tackboard, 48"W; 1 Tool Bar 24"W; 1 Work Surf, Hvy-Duty 48"W; 6 Shelf, 24"W; 6 Shelf, 48"W; 6 Shelf, Add-On 24"W; 6 Shelf, Add-On 48"W; 3 Shelf Unit, 3 Shelves 24"W; 1 Cart, Enclosed Body, Top Spine, 2 Drawers, 2 Dbl Wide Wire Shelf, Dividers, Solid Dbl Wide Doors, 36"H; 1 Cart, W/Push Handles, Mobile, 2 Wire Shelf, Solid Shelf 21"D x 36"W; 1 Cart, Mobile Dolly Base, 4 Wire Shelf, Solid Shelf, 24"D x 36"W; 1 Mobile Pedestal, File/File 2 Task Light, 42"W; 1 Diag Tray 2 Keyboard Tray, Fully Adj. *Connecting hardware required to complete installation.

Pharmacy manufacturing and prepack (low volume). THIS TYPICAL INCLUDES: 1 Shelf, Storage/Display 24"W; 4 Shelf, Storage/Display 36"W 4 Wall Strip 84"H 1 Equipment Rail, 24"W; 1 Adapter Rail, 36"W 1 Work Surf, Hvy-Duty 24"D x 72"W 1 Module, Cant Sink-Adaptable, w/Corian Top, 24"D x 24"W; 1 Storage Case, 3 Bottle Dwrs, Legs 1 Eyewash 1 Keyboard Tray, Fully Adj. 1 Sink and Faucet Assemble

E0668 I.V. ADMIXTURE, THIS TYPICAL INCLUDES: 1 Table, Process w/Casters Adj Ht 48W 1 Freestanding Sink Adaptable Cabinet w/Backsplash, w/Corian Top, 24W; 2 Tray/Shelf 1 Storage Frame 3 Drawer, 3H 2 Drawer, 6H 1 Drawer, 9H 1 Mobile Cart with Top Surface 3 Wire Shelf 1 Locker on Wheels w/Door 1 Eyewash 1 Keybd Tray, Fully Adj. 1 Sink and Faucet Assembly Drawer Organizer Bins

Low back contemporary swivel chair, 37" high X 25" wide X 31" deep with a five (5) caster swivel base, arms and foam padded seat and back upholstered with either woven textile fabric or vinyl.

Oxygen flowmeter. Consists of a clear crystal flowtube calibrated to 3.5 or 8 LPM depending on manufacturer. For oxygen regulation in hospital settings. Database pricing includes DISS fitting and DISS power outlet and wall adapter. Other fitting and adapter configurations are available.

Low pressure, low volume surgical aspirator. Stand mounted stainless steel unit. 1/8 HP motor with variable suction intensity. It includes 600 ml graduated collection bottle, hydrophobic bacteria filter, a precision suction regulating valve, timer and a foot regulator. For post operative surgical wound drainage and general suction use.

The Midori is a natural design made in ash wood. It comprises two chairs, with and without arms; one small armchair and two stools, high and low. The structure is stained in order to highlight the grain of the ash, choose your colour from the chart at the end of our price list. The armchair offers an optional decorative cushion, which increases the comfort of the piece and gives it a cosy, homely touch. The stools include a polished stainless steel footrest. The Midori is available in fabric, leather or synthetic leather.

Energy class B, saves energy and waterAdjustable comfort flow and comfort temperatureOutlet for table-top dishwasher in rear

Kitchen faucet Nautic RH - low cast spout With elongated lever

Kitchen mixer with low spout, and on-off valve for dishwasher. Soft closing function. Adjustable flow control and temperature limiter. Chrome RSK 8308986 NRF 4300948 96410010 with 3/8" connection RSK 8308987 NRF 4300949 .

The SRW6U SmartRack 6U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The side panels and front door lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible front door can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW6U comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 16.5 inches deep, such as network switches and patch panels.

The SRW9U SmartRack 9U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The side panels and front door lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible front door can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW9U comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 16.5 inches deep, such as network switches and patch panels.

The SRW10US SmartRack 10U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW10US comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.

The SRW12US SmartRack 12U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW12US comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.

The SRW18US SmartRack 18U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 250 pounds. The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW18US comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.

The SRW12USG SmartRack 12U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The front door features a shatter-resistant clear acrylic window that lets you monitor equipment readouts without unlocking the enclosure. Not only does the window help prevent equipment tampering and reduce acoustic noise, but it also adds visual flair to your IT installation. The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft. The top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW12USG comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and 12-24 threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.

Sandringham 21 low level cistern 6 litre single flush syphon bottom supply and internal overflow

Sandringham 21 low level cistern 6 litre single flush syphon side supply and internal overflow

Alto one hole basin mixer with pop up waste - single lever - for low pressure

The fundamental vision behind Christophe Pillet’s new Varilounge sofa system was to create a seating furniture series for public spaces with the softer, elegant, sensual and extremely comfortable feeling typically associated with the home. “It’s interesting that hard contract furniture usually has a very hard look, too,” says Christophe Pillet. “It’s usually not at all comfortable, much less cozy or sensual. That is a pity. What’s right for the home is actually right for every purpose. We wanted to offer domestic comfort, appearance and emotion, with a smooth softness, but inserted into a tough public context.”

The fundamental vision behind Christophe Pillet’s new Varilounge sofa system was to create a seating furniture series for public spaces with the softer, elegant, sensual and extremely comfortable feeling typically associated with the home. “It’s interesting that hard contract furniture usually has a very hard look, too,” says Christophe Pillet. “It’s usually not at all comfortable, much less cozy or sensual. That is a pity. What’s right for the home is actually right for every purpose. We wanted to offer domestic comfort, appearance and emotion, with a smooth softness, but inserted into a tough public context.”

The fundamental vision behind Christophe Pillet’s new Varilounge sofa system was to create a seating furniture series for public spaces with the softer, elegant, sensual and extremely comfortable feeling typically associated with the home. “It’s interesting that hard contract furniture usually has a very hard look, too,” says Christophe Pillet. “It’s usually not at all comfortable, much less cozy or sensual. That is a pity. What’s right for the home is actually right for every purpose. We wanted to offer domestic comfort, appearance and emotion, with a smooth softness, but inserted into a tough public context.”

The fundamental vision behind Christophe Pillet’s new Varilounge sofa system was to create a seating furniture series for public spaces with the softer, elegant, sensual and extremely comfortable feeling typically associated with the home. “It’s interesting that hard contract furniture usually has a very hard look, too,” says Christophe Pillet. “It’s usually not at all comfortable, much less cozy or sensual. That is a pity. What’s right for the home is actually right for every purpose. We wanted to offer domestic comfort, appearance and emotion, with a smooth softness, but inserted into a tough public context.”

The fundamental vision behind Christophe Pillet’s new Varilounge sofa system was to create a seating furniture series for public spaces with the softer, elegant, sensual and extremely comfortable feeling typically associated with the home. “It’s interesting that hard contract furniture usually has a very hard look, too,” says Christophe Pillet. “It’s usually not at all comfortable, much less cozy or sensual. That is a pity. What’s right for the home is actually right for every purpose. We wanted to offer domestic comfort, appearance and emotion, with a smooth softness, but inserted into a tough public context.”

The fundamental vision behind Christophe Pillet’s new Varilounge sofa system was to create a seating furniture series for public spaces with the softer, elegant, sensual and extremely comfortable feeling typically associated with the home. “It’s interesting that hard contract furniture usually has a very hard look, too,” says Christophe Pillet. “It’s usually not at all comfortable, much less cozy or sensual. That is a pity. What’s right for the home is actually right for every purpose. We wanted to offer domestic comfort, appearance and emotion, with a smooth softness, but inserted into a tough public context.”

The fundamental vision behind Christophe Pillet’s new Varilounge sofa system was to create a seating furniture series for public spaces with the softer, elegant, sensual and extremely comfortable feeling typically associated with the home. “It’s interesting that hard contract furniture usually has a very hard look, too,” says Christophe Pillet. “It’s usually not at all comfortable, much less cozy or sensual. That is a pity. What’s right for the home is actually right for every purpose. We wanted to offer domestic comfort, appearance and emotion, with a smooth softness, but inserted into a tough public context.”

Connect Blue single lever basin mixer, tubular spout, no pop-up waste, low pressure

Connect Blue single lever basin, low pressure

CERAPLAN III kitchen mixer one hole high spout single lever hand with pull out spout, low pressure

Simplicity 800mm x 800mm low profile flat top shower tray inc. waste

Kitchen mixer with low spout, soft closing function and eco-function. Soft PEX flat end Ø10 mm. Out of 4MS approved brass. Chrome. RSK 8318200 LVI 6261202 VVS 705942104 245001 Soft PEX® hoses with 3/8". Chrome. RSK 8318201 NRF 4290178 In today’s families, the kitchen is a space for socialising and creativity. A modern kitchen mixer must look good, work perfectly and promote a high level of hygiene and safety. That’s why Mora Cera offers the things that everyone wants in their kitchen: thoughtfulness and quality time.

Kitchen mixer with low spout, soft closing function and dish washer valve. Soft PEX flat end Ø10 mm. Out of 4MS approved brass. Chrome. RSK 8318202 LVI 6261201 245031 Soft PEX® hoses with 3/8" connecting nut. Chrome. RSK 8318203 NRF 4290179 In today’s families, the kitchen is a space for socialising and creativity. A modern kitchen mixer must look good, work perfectly and promote a high level of hygiene and safety. That’s why Mora Cera offers the things that everyone wants in their kitchen: thoughtfulness and quality time.

Crometta E 240 1jet overhead shower Low Pressure min 0.2 bar

Crometta S 240 1jet overhead shower Low Pressure min 0.2 bar

Kithen mixer with dish washer valve, soft closing and Eco function. Soft PEX flat end Ø10 mm. 4MS approved lead free brass. Chrome. RSK 8318166 LVI 6261229 732250.TT Soft PEX flat end Ø10 mm. Turbo-Jet function. Chrome. RSK 8318165 LVI 6261195 732251 Soft PEX® hoses with 3/8". Chrome. RSK 8318225 NRF 4290186 732251.TT Soft PEX® hoses with 3/8". Turbo-Jet function. Chrome. RSK 8318226 Mora MMIX combines elegance and ergonomic design with energy-efficiency. Soft geometric curves and a timeless style characterise the entire Mora MMIX range. The mixers were developed according to our unique EcoSafe™ concept focusing on low energy consumption and long-term environmental care.

Chair with height adjustable, 4-star swivel base and tilt mechanism (or fixed). Structure made of die cast aluminium stove enamelled, polished or chromed. Seat shell made of printed polyurethane and metal frame, with back side made of plastic material, lacquered or covered with Camira® or Kvadrat® fabric or leather Pelle Frau®.

Armchair with "T" shaped (or "Y" shaped) arms, base made of stove enamelled or chromed steel wire Seat shell made of printed polyurethane and metal frame, with back side made of plastic material, lacquered or covered with Camira® or Kvadrat® fabric or leather Pelle Frau®.

Self adjusting swivel base armchair with 4-stars. Structure made of die cast aluminium stove enamelled, polished or chromed.

Armchair with base made of stove enamelled or chromed steel wire. Seat shell made of printed polyurethane and metal frame, with back side made of plastic material, lacquered or covered with Camira® or Kvadrat® fabric or leather Pelle Frau®.

CERAMIX BLUE single lever one hole basin mixer with pop-up waste, low pressure

CERAPLAN III single lever one hole basin mixer with pop-up waste, low pressure

CERAPLAN III single lever one hole basin mixer, no pop-up waste, low pressure

CERAPLAN III kitchen mixer one hole single lever hand, low pressure

CERAPLAN III single lever one hole basin mixer with pop-up waste, low pressure

CERAPLAN III kitchen mixer one hole high spout single lever hand, low pressure

CERAPLAN III kitchen mixer one hole high spout single lever hand, low pressure

CERAPLAN III kitchen mixer one hole single lever hand, low pressure

CERAPLUS GRANDE anti vandal single lever one hole basin mixer, no pop-up waste, low pressure

CERAPLUS GRANDE anti vandal single lever one hole basin mixer with pop-up waste, low pressure

RETTA kitchen mixer one hole single lever hand, low pressure

RETTA kitchen mixer one hole single lever hand with pull out spout, low pressure

NORA kitchen mixer one hole single lever hand, low pressure

NORA kitchen mixer one hole high spout single lever hand with pull out spout, low pressure

CERAPLUS 2 single lever one hole basin mixer, no pop-up waste, low pressure

CERAPLUS 2 GRANDE single lever basin mixer with pop-up waste, low pressure

<p><strong>Thermal shield for internal blinds</strong></p> <p><strong>78%</strong> of solar reflectance</p> <p><strong>15% of emissivity</strong> for thermal comfort all year round</p> <p>Excellent heat protection thanks to its double-sided metallization. The fabric alone reflects 87% of solar energy</p> <p>Excellent visual comfort</p> <p>A building skin that contributes to the reduction of energy consumption for air conditioning, lighting and heating</p>

BASIC TANK L - Low height concealed cistern with dual flush (4.5/3 - 6/3 L)

In his first collaboration with Swedese, international designer Khodi Feiz has created a comfortable easy chair with generous proportions and a timeless feel. As the name suggests, Pillo gives you a spontaneous sense of sinking down into a pile of soft cushions. Everything you need from an easy chair is stacked up in an ingenious design: a neckrest on a backrest on a comfortable seat on a reclining swivel base. The rounded form pays homage to the art of the upholsterer and the reference to Yngve Ekström’s classic Rondino easy chair is hard to miss. The Pillo easy chair is available in two back heights and with a footstool.

<p>“Move On high and low, are two discreet, mobile stools that do not obstruct the room, and works good at a bar or other similar informal meeting places, as well as with On Point”, says Mattias Stenberg.</p><p>The bar stool is upholstered with legs in white-pigmented ash. The seat frame is made in recyclable aluminium, according to Offecct Lifecircle.<span></span><br></p><p><strong>Benefits & functions</strong><br>- Easy to assemble and disassemble the seat frame.<br>- Can be upholstered in fabric or leather. <br>- Is available in two different heights, 600 mm and 800 mm.</p><p>The foot ring and seat underframe is available i black, silver or white lacquer alternative in Offecct Flexicolor.<br><br></p>

<p>“On Point is designed to allow full contact between up to eight people around it, while it’s also perfect for more private and intimate gatherings among a few individuals It’s also a way of creating a micro architecture in the room, with the tree’s natural ceiling that makes us feel pleasantly enwrapped and comforted”, says Mattias Stenberg.</p><p>On Point High, has an upholstered frame with a table top in white-pigmented oak. The center module in the middle of the table top is in lacquered MDF. It is available in different dimensions and makes it possible to fit different sizes of plants into the table. The tables heights make it possible to choose between standing or sitting on a bar stool.</p><p><strong>Benefits & functions<br></strong>- Can be upholstered in fabric or leather.<br>- Can be equipped with a powerbox.<br>- It fits up to eight people.<br>- The center module is available in three different spaces, see images below<br></p>

MasterTop 1324 is a hard wearing, elastomeric, crack bridging, low emission and decorative matt polyurethane flooring system which can be applied with smooth or slip resistant finishes to a large range of substrates. MasterTop 1324 AS is a antistatic, low emission, polyurethane flooring system, with smooth coating, for industrial floors with low to medium loads, where some crack bridging properties and especial performance of antistatic are desired (EN 1081). MasterTop 1324 ESD provided also an especial performance of ESD (IEC 61340-5-1). Typical applications: computer areas, laboratories, operating theatres, electronic and pharmaceutical industry etc. • Low emission • Excellent mechanical properties • Abrasion resistant • Statical crack bridging • Seamless • Easy to clean and maintain • Anti-static properties • Color freedom • Water based, environmentally friendly • Improves scratch and wear resistance • ESD properties (IEC 61340-5-1)

MasterTop 1327 offers two of the latest noise deadening flooring systems in the decorative and comfortable flooring market. They have the same smooth, slip resistant, antibacterial, matt or satin matt and low emission properties as any other member of MasterTop 1300 family. MasterTop 1327-16dB is a unique solid flooring system with the softest properties in our MasterTop 1300 family. MasterTop 1327-20dB is a very durable system build up that provides the best sound deadening properties in the market. MasterTop 1327 series perform best in areas where people demand the most of design and comfort. They will excel in sectors such as homes for elderly people, hospitals, offices, schools etc. • Elastic • Improves acoustics • Solid system • Low emissions • Comfortable • High noise deadening • Sound absorbing • Easy to clean • Crack bridging • Bacteriostatic properties according to ISO 22196:2011 • Color freedom • Available with very soft properties (MasterTop 1327-16dB) and with a very durable system build up (MasterTop 1327-20dB)

MasterTop WS 100 PU is a low emission universal polyurethane wall system, with a smooth and matt finish. MasterTop WS 200 PU is an elastic polyurethane wall system and MasterTop WS 300 PU is a fibreglass reinforced elastic polyurethane wall system. MasterTop WS series are polyurethane wall systems, smooth, low emission, with a matt finish and they can be applied where crack bridging, decorative, fire resistant, bearing low, medium or heavy impacts required: for example production areas, hospitals, warehouses and technology rooms, bathrooms, corridors, hotels. BENEFITS • Elastic • Low emission • Fire resistant • High impact strength • Seamless • Easy to apply • Crack bridging • Especially high-strength hygienic system • UV-stable • Color freedom • Elegant appearance • High resistance to bacteria, chemicals, discoloration and abrasion • Water-based

Different types of corner WC with minimal space. Editable with MEP Modeler.

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Demo 2D-3D Parametric by ArchiRADAR with low polygon quantity; they have a real growing factor according to the size, able to generate always different plants; they have also a corresponding symbolic view in elevation. Optimized for BIMX. https://www.archiradar.it/en/3d-objects/objects-on-sale/category/view/44.html

Низкотемпературный плазменный стерилизатор, 770х1070х1685 мм,PL 130/2 Steelco, Италия Caring for your most delicate instruments User friendly low temperature vaporized H2O2 technology (VH2O2) with low power and energy consumption. Thanks to the gas plasma action the hydrogen peroxide used during the process decomposes into water and oxygen for safe release into the environment. VH2O2 sterilization provides user safety and is environmental friendly.

Удобная для пользователя низкотемпературная испаренная технология H2O2 (VH2O2) с низким энергопотреблением. Благодаря газоплазменному действию перекись водорода, используемая в процессе, разлагается на воду и кислород для безопасного выброса в окружающую среду. Стерилизация VH2O2 обеспечивает безопасность пользователя и является экологически чистой. PL 70/1 Одностворчатая дверь, 81,7 л / вместимость 2,88 фута3 Размер камеры W x D x H 450 x 825 x 220 мм / 17,72" x 32,48" x 8,66" Внешний размер W x D x H 642 x 920 x 1630 мм / 25,28" x 36,22" x 64,17" PL 70/2 двойная дверь, 84,1 литра / вместимость 2,97 фута3 Размер камеры W x D x H 450 x 850 x 220 мм / 17,72" x 33,46" x 8,66" Внешний размер W x D x H 642 x 990 x 1630 мм / 25,28" x 38,97" x 64,17" User friendly low temperature vaporized H2O2 technology (VH2O2) with low power and energy consumption. Thanks to the gas plasma action the hydrogen peroxide used during the process decomposes into water and oxygen for safe release into the environment. VH2O2 sterilization provides user safety and is environmental friendly. PL 70/1 Single door, 81.7 litres / 2.88 ft3 capacity Chamber dimension W x D x H 450 x 825 x 220 mm / 17.72” x 32.48” x 8.66” External dimension W x D x H 642 x 920 x 1630 mm / 25.28” x 36.22” x 64.17” PL 70/2 double door, 84.1 litres / 2.97 ft3 capacity Chamber dimension W x D x H 450 x 850 x 220 mm / 17.72” x 33.46” x 8.66" External dimension W x D x H 642 x 990 x 1630 mm / 25.28” x 38.97” x 64.17"

Complete toilet set: WC pan dual outlet, low cistern with dual push-button mechanism 3/6 litres, fixed seat.

This light Traffic acoustic vinyl flooring, high-end collection, is developed to target the social housing new construction with dedicated colors, up to 58 different ones, and design approach (11 different designs). - New and innovative designs, especially developed for social housing - New embossing technology giving the product a very matt surface aspect - 20dB Sound absorption - Best score in the market for residual indentation - Very low emissions for good indoor air quality: TVOC <10 µg/m³ - Phthalate Free Technology

The perfect balance between luxury and value, our Tork Elevation® Foam Soap Manual Dispensing System uses highly concentrated, rich foam in a controlled closed dispensing system. This new system delivers nearly four times more hand washes per refill than liquid soap while offering a unique, luxurious, refreshing, and hygienic experience. Controlled usage 0.4 ml per dose. Low maintenance easy and quick to replace refills. More hand washings per refill & high capacity results in low cost-in-use – Sealed collapsible bottle refills reducing contamination and ensuring complete usage of the product.

Complete toilet set : WC pan dual outlet, low cistern with dual push-button mechanism 3/4,5 litres, side inlet, fixed seat. Options: Low cistern with dual push-button mechanism 3/4,5 litres, bottom left inlet, soft closing seat.

When you look back at 40 years of flooring success, iQ Granit is one of the best-proven flooring materials on the market. Thousands of architects have experienced iQ Granit’s opportunities for creating harmonious commercial interiors. Tens of thousands of cleaning staff know that the claims for unique cleaning properties are true. Thousands of managers with budget responsibilities have been more than pleased by the low maintenance costs, and hence the superior life cycle cost. And millions of users are proof of the superb wear qualities of this homogeneous flooring. ■A complete coordinated range for every area ■An acoustic solution colour and pattern coordinated ■iQ unique self regenerating properties ■Best lifecycle costs on the market ■VOC below quantifiable level and phthalate free ■100% recyclable

Complete toilet set : BTW WC pan compact dual outlet, low cistern with double push mechanism 3/4,5 litres, fixed seat. Options: Soft closing seat, pull-out seat.

# Feeds the next sheet automatically # Fast and easy to use; sheet always available # High capacity - 800 sheets to a roll is enough to dry hands 400-530 times - ideal in high traffic areas # Designed to ensure all the paper on the roll is used # Very low power consumption -Powered by 4 x LR20 1.5 V batteries (not supplied) # Controlled consumption for high traffic washrooms

# Electronic dispenser that produces an even aroma level 24 hours a day for one month # Easy to open with a button on top of the dispenser # Silent # Low energy consumption. Powered by one LR20 1.5 V battery (not supplied) # Three different modes: light detection, ON 24/7, OFF (to disconnect mode).

# Feeds the next sheet automatically # Fast and easy to use; sheet always available # High capacity - 800 sheets to a roll is enough to dry hands 400-530 times - ideal in high traffic areas # Designed to ensure all the paper on the roll is used # Very low power consumption -Powered by 4 x LR20 1.5 V batteries (not supplied) # Controlled consumption for high traffic washrooms

# Electronic dispenser that produces an even aroma level 24 hours a day for one month # Easy to open with a button on top of the dispenser # Silent # Low energy consumption. Powered by one LR20 1.5 V battery (not supplied) # Three different modes: light detection, ON 24/7, OFF (to disconnect mode).

[LIST] Low Energy electromechanical swing door operator The ED 100/250 A swing door operator is especially suitable for exterior doors that are subjected to varying wind loads and for interior doors separating rooms where different air pressures prevail. The Wind Load Control monitors the actuation speed, keeping it constant at the preset value. Dimension 685 x 70 x 130 mm Max. Door Weight 100 kg (ED 100), 250 kg (ED 250) Max. Door Width 1100 mm (ED 100), 1600 mm (ED 250) Max. Opening Angle 110° Hold-open time 0 to 30 seconds Push or Pull version for single or double leaf doors Activation via radar, push pad, linking to access control systems and other actuation devices Tested to 1,000,000 cycles Low noise levels through multi–stage gearing Suitable for use on emergency escape and fire doors Suitable for use on projects to meet EN 16005 [/LIST]

[LIST] Concealed slide channel door closer with cam-action technology The DORMA ITS 96 door closer is designed for concealed installation in the door leaf and frame. Suitable for almost every type of door, it offers a wide variety of functions and flexibility combined with a high level of quality. Successfully third party tested to BS EN1154. CERTFIRE Approved CF 140 Universally suitable for single or double doors Concealed installation for Door leaf thickness ≥ 40 mm Adjustable Closing Force and Optional hold-open Unblemished appearance of prestige doors thanks to concealed installation Same slide channels and accessories for the ITS 96 EN 2-4 and EN 3-6 models Benefits: Optimum protection against vandalism thanks to concealed installation. Enhanced user convenience with low opening forces, fully controlled reliable closing and adjustable latch action [/LIST]

Tork Elevation® dispensers simplify and complement any environment, providing a clean, hygienic appearance. Our new design ensures easy and intuitive maintenance, refilling and use. The Tork Centerfeed Dispensing Systems enable an easy, one-handed operation and controlled consumption. They are the ideal systems for areas where hand and light surface wiping are combined. Tork Centerfeed high capacity cabinets are ideal for high traffic environments. Cabinets are hygienic. You only touch the towel you use. No cross contamination from levers or cranks. The Portion Control feature dispenses one towel every time. Cabinets are simple and reliable offering low maintenance costs.

Sikafloor® PurCem® HS-21 Gloss is an industrial and commercial flooring system based on polyurethane cement hybrid technology. The flooring has a a hard, glossy and smooth surface, normally applied 3 - 6 mm thickness. The main uses for example: industrial environments, coolers, "back of house" areas, storages, kitchens and ground floor garages. Product specifications: • Glossy, smooth and dense surface • High scratch resistance • Very good chemical resistance • Dense and impervious • Seamless • Low dirt pick-up • Easy to keep clean and maintain • Odourless • VOC free and environmental friendly • Can be applied on concrete substrates with high moisture content

Purusline Living 600mm with outlet Ø50 side side and grating in stainless steel with DROP pattern. Includes a 50mm to 1½” push fit to solvent weld ABS adapter. The shape opens up completely new opportunities for exciting designs in the bathroom. The pattern of the grating you choose is a matter of taste. The Purusline Living Wetroom Solution allows quick and easy showering, level access and low maintenance, creating an easy to install wetroom that is fashionable, functional and spacious.

Outlet Ø102mm Fixing on wall, c/c 180mm according to European standard (Wall mount included) Push-fit socket 38-45mm Front mounted. Combination with wall fixture and build in flushing cistern. Can be equipped with seat pads or seat with cover. Purus Stainless steel toilets are practical for surroundings with tough requirements for durability, hygiene and the possibility for adjustments. For example in public toilets, sports centres, restaurants and public institutions. Stainless steel toilets are also an interesting alternative in specially designed environments such as high and low level security places.

Koja Sofa High is a sofa with a protective shell of ash wood. An upholstered upper part and down-filled cushions make the high Koja a perfect place to relax or seclude yourself from the noisy surroundings. Koja is suitable for hotel lobbys, lounge areas and libraries, among many other locations. Koja also comes in a low version and is also available as easy-chair with high and low backrest. Design: Fredrik Mattson.

Purusline Living 800mm with outlet Ø50 side side and grating in stainless steel with TWIST pattern. Includes a 50mm to 1½” push fit to solvent weld ABS adapter. The shape opens up completely new opportunities for exciting designs in the bathroom. The pattern of the grating you choose is a matter of taste. The Purusline Living Wetroom Solution allows quick and easy showering, level access and low maintenance, creating an easy to install wetroom that is fashionable, functional and spacious.

For casual meetings on the terrace. Garden Lounge Table is a low table for more casual outdoor meetings. It is suitable especially for our Garden Lounge Chair. The table is made of beautiful teak and stainless steel.

Koja High is an easy chair with a protective shell of ash wood. An upholstered upper part and down-filled cushions make the high Koja a perfect place to relax or seclude yourself from the noisy surroundings. Koja is suitable for hotel lobbys, lounge areas and libraries, among many other locations. Koja also comes in a low version and is also available as a sofa with high and low backrest. Design: Fredrik Mattson.

Outlet Ø102mm Fixing on wall, c/c 180mm according to European standard (Wall mount included) Push-fit socket 38-45mm Floor standing and wall mounted. Can be combined with wall fixture and built in flushing cistern. Tested according to EN 997, approved by TÜV. Vandal-proof is optional. Purus Stainless steel toilets are practical for surroundings with tough requirements for durability, hygiene and the possibility for adjustments. For example in public toilets, sports centres, restaurants and public institutions. Stainless steel toilets are also an interesting alternative in specially designed environments such as high and low level security places.

Handicap model Outlet Ø110mm to floor Fixing on floor Water connection ½´ Floor standing and screwed to floor. Prepared for seat-lid, choose lid separately. Tested according to EN 997. Flushing capacity 6 litres. Purus Stainless steel toilets are practical for surroundings with tough requirements for durability, hygiene and the possibility for adjustments. For example in public toilets, sports centres, restaurants and public institutions. Stainless steel toilets are also an interesting alternative in specially designed environments such as high and low level security places.

Outlet Ø110mm to wall Fixing on floor Water connection ½´ Floor standing and screwed to floor. Prepared for seat-lid, choose lid separately. Tested according to EN 997. Flushing capacity 6 litres. Purus Stainless steel toilets are practical for surroundings with tough requirements for durability, hygiene and the possibility for adjustments. For example in public toilets, sports centres, restaurants and public institutions. Stainless steel toilets are also an interesting alternative in specially designed environments such as high and low level security places.

Handicaped model. Outlet Ø110mm to wall Fixing on floor Water connection ½´ Floor standing and screwed to floor. Prepared for seat-lid, choose lid separately. Tested according to EN 997. Flushing capacity 6 litres. Purus Stainless steel toilets are practical for surroundings with tough requirements for durability, hygiene and the possibility for adjustments. For example in public toilets, sports centres, restaurants and public institutions. Stainless steel toilets are also an interesting alternative in specially designed environments such as high and low level security places.

Handicap model Outlet Ø102mm Fixing on wall, c/c 180mm according to European standard (Wall mount included) Push-fit socket 38-45mm Floor standing and wall mounted. Can be combined with wall fixture and built in flushing cistern. Tested according to EN 997, approved by TÜV. Vandal-proof is optional. Purus Stainless steel toilets are practical for surroundings with tough requirements for durability, hygiene and the possibility for adjustments. For example in public toilets, sports centres, restaurants and public institutions. Stainless steel toilets are also an interesting alternative in specially designed environments such as high and low level security places.

Outlet Ø110mm to floor Fixing on floor Water connection ½´ Floor standing and screwed to floor. Prepared for seat-lid, choose lid separately. Tested according to EN 997. Flushing capacity 6 litres. Purus Stainless steel toilets are practical for surroundings with tough requirements for durability, hygiene and the possibility for adjustments. For example in public toilets, sports centres, restaurants and public institutions. Stainless steel toilets are also an interesting alternative in specially designed environments such as high and low level security places.

Handicap model Outlet Ø102mm Fixing on wall, c/c 180mm according to European standard (Wall mount included) Push-fit socket 38-45mm Front mounted. Combination with wall fixture and build in flushing cistern. Can be equipped with seat pads or seat with cover. Purus Stainless steel toilets are practical for surroundings with tough requirements for durability, hygiene and the possibility for adjustments. For example in public toilets, sports centres, restaurants and public institutions. Stainless steel toilets are also an interesting alternative in specially designed environments such as high and low level security places.

<p>“Move On high and low, are two discreet, mobile stools that do not obstruct the room, and works good at a bar or other similar informal meeting places, as well as with On Point”, says Mattias Stenberg.</p><p><br>The bar stool is upholstered with legs in white-pigmented ash. The seat frame is made in recyclable aluminium, according to Offecct Lifecircle.</p><p><strong>Benefits & functions</strong><br>- Easy to assemble and disassemble the seat frame.<br>- Can be upholstered in fabric or leather. <br>- Is available in two different heights, 600 mm and 800 mm.<br><br>The foot ring and seat underframe is available i black, silver or white lacquer alternative in Offecct Flexicolor. </p>

A wall mounted articulating boom system that provides the flexibility of a ceiling boom and the practicality of a headwall. Unit has an arm range of 190 degrees and 330 degree head rotation. Provides availability of retractable or fixed, single or double arms. Unit can supply up to 16 gas outlets and up to 40 line voltage receptacles and 12 low voltage provisions. Unit provides multiple bed/caregiver interface positions. A variety of accessories are available.

A shoe cover dispenser for use in areas requiring use of shoe covers. Unit is designed for low to moderate usage and holds 55 pairs of shoe covers. Dispenser allows workers to put-on shoe covers quickly, easily and safely. Shoe cover refills are available to meet requirements of various applications (clean rooms, waterproof, anti-static, non-skid).

Modified epoxy resin countertop (composition of molded epoxy resins and inert materials) having a low sheen surface finish, standard thickness of 1", and a 4" butt backsplash/curb. Also referred to as a work surface or work top. Available in a choice of colors and depths. Used in lab areas requiring optimum physical and chemical resisting properties.

Quick disconnect coupler for a low pressure air line on a dental laboratory work bench. The coupler uses a 3/8" NPT connection to the servicing air supply line.

Nurse Station typicals have non-powered steel frames with a pre-installed metal junction box for user defined hard-wired electrical solutions. Data modules and low voltage cabling can be routed freely within the frame. Electrical and/or data devices are not provided as part of the typical. Panel inserts are available in fabric, painted metal, tackable, acoustical, paper management, rail, glass, open and electrical/data accessible configurations. Typicals include panel inserts for both sides of the steel frame. All electrical connections must be made by an electrical contractor. THIS TYPICAL INCLUDES: 3 steel frames; 1 cantilevered work surface, 135 Degrees; 1 panel insert, tackable, 16"H; 2 panel inserts, paper mgmt., 16"H; 9 panel inserts, painted metal; 1 countertop w/light support assembly, 16"D; 2 paper trays, 10"W; 1 binder/file holder.

Nurse station typicals have non-powered steel frames with a pre-installed metal junction box for user defined electrical solutions. Data modules and low voltage cabling can be routed freely within the frame. Electrical and/or data devices are not provided with the nurse station. Panel inserts are available in fabric, painted metal, tackable, acoustical, paper management, rail, glass, open and electrical/data accessible styles. Typicals include panel inserts for both sides of the steel frame. All electrical connections must be made by an electrical contractor. THIS TYPICAL INCLUDES: 5 steel frames, 70"H x 24"W; 1 steel frame, 70"H x 48"W; 2 steel frames, 38"W x 48"W; 4 steel frames, 38"H x 24"W; 1 steel frame w/low access, 38"H x 48"W; 2 frame connectors, 3-way corner, 70"H; 1 frame connector, 2-way corner, 38"H; 2 frame connectors, 135 degree, 2-way, 38"H; 9 finished end hardware; 6 frame-to-frame connectors; 3 cantilevered work surface, 48"W; 2 cantilevered, work surface, 72"W; 1 cantilevered low access work surface, 135 degree, 48"W; 2 pedestal box/box/files; 2 panel inserts, painted metal, 8"H x 24"W; 50 panel inserts, painted metal, 16"H x 24"W; 10 panel inserts, painted metal, 16"H x 48"W; 2 panel inserts, painted metal, 20"H x 48"W : 2 panel inserts, tackable, 16"H x 24"W; 2 panel inserts, paper mgmt., 8"H x 48"W; 1 countertop w/light support assembly, 16"D x 14'-0"L; 18 paper tray, 10"W; 2 chart shelf, pass-thru, 24"W; 2 chart shelf, pass-thru, 48"W.

Laboratory centrifuge. This is a medium to large capacity unit with an operating range of -20 degrees to 40 degrees C. It permits running samples at body temperature. It also has a rotor imbalance detector and an auto-shut down capability if the rotor load is out of balance. The unit is constructed of a stainless steel chamber with a rear exhaust and is a low heat output unit. Used in laboratories to spin samples for further analysis.

Combination cell washer and centrifuge. The unit has two fixed speeds of 3600 or 12000 RPM. It is a microprocessor controlled unit with a programmable memory that can hold up to four wash cycles. It has a built-in peristaltic pump with a drain, dual angle rotor, low saline level alarm and uses 10 X 75mm or 12 X 75mm tubes. Used for compatibility testing, cytological studies and other laboratory applications.

Refrigerated centrifuge. This is a floor standing unit with a solid state speed control system that has speeds ranging from approximately 150 to 6000 RPM. Other characteristics include a temperature range of -9 to +39 degrees C., dual range digital timer, rotor imbalance detection, a programmable memory and a dynamic brake with three deceleration rates. The unit also has a refrigeration system that consists of a low maintenance compressor and a coil wrapped insulated guard bowl. Used in laboratories for processing heat sensitive samples.

Bio safety cabinet, Class II, Type A1. This is a vertical freestanding unit with a face velocity of 100 fpm, constructed of type 304 stainless steel. The inside walls have a high velocity air return. The unit utilizes 70% air recirculation 30% exhaust either into room or through to the outside. It requires HEPA and includes a removable work tray, built-in drain valve, two valve penetrations with blanking plugs, duplex outlet and a fluorescent lamp. Used for low to moderate risk biological agents with the absence of volatile toxic chemicals and radionuclides. 4 foot model, other sizes available.

Class II, type B1, bio safety cabinet. This is a vertical, freestanding unit. The interior work surfaces shall be constructed of type 304 stainless steel and the exterior shall be of 16 gauge or heavier steel. The unit utilizes a 30% recirculated air and 70% direct exhaust through an in-house duct system, the face velocity is 100 fpm and includes an audible alarm when the window is at an unsafe operating level. It includes grounded duplex receptacles and two HEPA filters zero-probed. Used for low to moderate risk biological agents treated with minute quantities of toxic chemicals and trace amounts of radionuclides. A 4 foot cabinet is presented, other sizes are available.

Class II, Type B2, bio safety cabinet. This is a freestanding vertical laminar flow unit. It includes two HEPA filters, one supply and one exhaust zero-probed. The intake velocity averages 105 fpm. It includes an audible alarm to notify the operator of an unsafe window position, an audio-visual alarm to monitor exhaust pressure, type 304 stainless steel construction with side walls slotted for high velocity air return, an exterior of 16 gauge or heavier steel, two grounded key petcocks and a duplex receptacle for grounded plugs. Used for low to moderate risk biological agents treated with toxic chemicals and radio-nucleotides. 4 foot model presented, other sizes are available.

Class II, Type B2, benchtop biological safety cabinet. The unit includes two HEPA filters, one supply and one exhaust, zero probed, high intake velocity that averages 105 fpm, an audible alarm to notify operator of unsafe window positions an audio-visual alarm to monitor exhaust pressure, interior of type 304 stainless steel with side walls slotted for high velocity air return, an exterior of 16 gauge or heavier steel, two ground key petcocks, a grounded duplex receptacle. Used for low to moderate risk biological agents treated with toxic chemicals and radionucleotides. This unit requires 100% exhaust to the atmosphere. 4 foot model presented, other sizes are available.

Canopy fumehood. The unit includes a switched fan unit with pilot light; corrosion resistant steel, aluminum, or chemical resistant and fire retardant seamless fiberglass construction; dimensions as indicated on design drawings; fire suppression systems and any other special requirements to be defined during the facility design. It also includes a 3/4 horsepower motor blower. The static pressure loss shall not exceed 0.91 at 1290 cfm and 1.65 at 1935 cfm. It is equipped with baffles to maximize slot velocities and control fumes. Used in laboratories for low to moderate risk biological agents. Other sizes may be available. Blower motor mounted separate from the canopy and may not be included in the size specification.

Pulmonary function analyzer system. Unit includes whole body plethysmography, spirometer, computer, and gas analyzers. Computer based system for use in cardio-pulmonary areas. The system measures the ventilation, diffusion and distribution of gases in the lungs. It has automatic calibration and valves are pneumatically operated and controlled by the computer. Used to measure the performance of a patient's respiratory system; for out-patient or pre-surgical screening. Systems have specific high pressure air and oxygen and low pressure helium requirements. Refer to manufacturer's literature.

Desk top copier. Copier consists of two tray paper supply with clip tray, sort indicator, two page copy indicator, automatic paper selection and frame eraser with zoom capabilities. For use where low volume reproduction is required.

Portable plastic bag heat sealing machine. Heavy duty portable sealer, motor driven with foot switch, 16 inches long clamping jaw minimum, 1/8 inch (2mm) wide heat seal, grounding plug and 3-wire electrical cable. Equipped with low voltage impulse generator with electronic timer. For making air and water-tight seals on plastic bags.

Pressure reduction mattress. Consists of polyurethane foam and air or gel cylinders to spread pressure of patient's body weight across a larger surface area. Some models have electric pumps for inflation and pressure adjustment; other manufacturers score the foam to distribute pressure. Used to prevent bed sores from developing and promote the healing of ulcers. Unit also relieves patient stress by reducing the amount of required patient turning. All-gel and all-foam mattresses as well as comparably therapeutic low air loss mattress systems are available.

Infant scale. Unit comes with a stainless steel platform. It is battery operated and equipped with low battery indicator. It has a self-contained digital LED display with automatic shutoff; accuracy to 1 gram. Unit is designed for daily/serial weighing of infants in incubators and cradle warmers.

The ophthalmic refraction desk shall be specifically designed to conduct eye examinations in ophthalmic clinics and hospital. It shall have a control console consisting of three rechargeable instrument wells, two 110v auxiliary switches to control accessories, two low voltage switches to control fixation lights, a separate on/off dimmer control for room lights and an indirect ophthalmoscope control with hanger that provides power to the instrument when lifted. This item may include an optional equipment stand/pole with one to three arms and the ability to accept a phoropter arm. There shall be a swivel Lamp and a trial lens drawer.

A low consumption (1.0 gallon per flush) vitreous china, wall hung, washout flush action urinal with extended sides, flushing rim, 3/4" inlet spud, 2" I.P.S. female outlet connection and stainless steel strainer. For general purpose use in male toilet rooms.

A floor mounted, flush valve toilet with an elongated front and a load capacity of 1,000 pounds. The toilet with be vitreous china with a 1.28 or 1.6 Gpf low water consumption rate with a rear outlet. See manufacturer's literature for recommended flush valves and toilet seats.

A 68 to 75 kW electric steam generator/boiler with low water cut-off/level control, water level sight glass, main off/on switch, pilot light, blowdown/drain valves, safety valve, and steam pressure gauge. The unit can deliver steam at operating pressures up to 90 PSIG and produce a minimum steam output of 205 lbs./hr. Unit provides condensate free steam, between 97% to 100% vapor quality, needed to power sterilizers, water stills, utensil sanitizers, and other steam powered equipment when facility supplied steam is not available. Various electrical configurations are available for the heaters, for pricing purposes 208V, 60HZ, 3PH, 209AMPS is used.

A low temperature sterile processing system for sterilizing immersible surgical and diagnostic scopes, cameras, instruments and accessories. The unit shall provide a digital display of cycle data and shall record and print a permanent record of cycles. Units are available in floor, counter top or cart models.

A self-contained, countertop mounted, electrically heated, steam sterilizer. The unit is controlled by a microcomputer that monitors and controls all unit operations and functions and provides visual indication of cycle stages and deviations. A printer-recorder documents and records each cycle performance. For low volume, convenient, steam sterilization of liquids, media, instruments, glassware, and absorbent materials, in clinics and other areas of the health care facility.

A compact low temperature hydrogen peroxide gas plasma sterilizer mounted on a mobile cart. Sterilization chamber shall have a capacity of approximately 1.75 cubic feet. The sterilizer shall be capable of processing metal instruments, plastics, heat and moisture sensitive devices in approximately 45 minutes with no aeration required. Unit shall be equipped with a visual display and audible alarm. A built in printer will provide system performance record for each cycle.

A floor mounted, low temperature hydrogen peroxide gas plasma sterilizer. Sterilization chamber shall have a capacity of approximately 3.5 cubic feet (100 liters). The sterilizer shall be capable of processing metal instruments, plastics, heat and moisture sensitive devices in approximately 75 minutes with no aeration required. Unit shall be equipped with a visual display and audible alarm. A built in printer will provide system performance record for each cycle.

A dental radiographic unit providing three-dimensional images. The unit uses a cone-shaped beam to acquire an image in a single pass. The unit provides a superior high resolution 3D image with low radiation dosage. Allows comprehensive examination and precise information on the anatomy of a patients mouth, face and jaw areas by producing 3D images of all oral and maxillofacial structures.

Ytong autoclaved aerated concrete is a construction product unique, consisting of sand, lime, cement, water and millions of air pores, which give lightness and great performances: thermal and acoustic insulation, fire resistance and strength. Aerated concrete was produced in 1929 in southern Sweden Yxhult, in times of scarcity of raw materials and energy. From the original name “Yxhults Anghärdade Gasbetong” a short time later Ytong became the first registered building material brand in the world, which made the name Ytong worldwide career and changed the building sustainably, establishing itself as a fixture on the international level in the market. The extensive product range allows the construction of a whole building with aerated concrete, from basement to roof. For each single need Ytong offers the right solution: external and internal walls, load-bearing and infill walls, Ytong is used for residential and industrial, new and renovated buildings. Thanks to its structure comprising millions of tiny pores, Ytong offers optimum solidity at low weight. As air has a low heat conductivity, aerated concrete provides for excellent thermal protection. It protects from cold and heat, allowing for single-shell constructions which provide more space and reduce costs.

Advantages of YTONG AAC: • High fire resistance of YTONG load-bearing walls - REI 360 • Ecological material, level Ecomaterial ABSOLUTE • Low thermal conductivity • High compressive strength • Technical support for architects and planners YTONG is a white stone and consists of lime, sand, cement and water. Inside, it contains millions of air pores, which also gave him the name: aerated concrete. Over 70 years ago it was produced in southern Sweden Yxhult. The new building material was called YTONG = ""Yxhults Anghärdade Gasbetong"", which means autoclaved aerated concrete from Yxhult. YTONG has established itself on the international construction market as an ecological and structural-insulating material. YTONG AAC is one of the most fire-resistant building material and it is used in the construction of fire barriers. Also YTONG AAC is popular in areas of high seismic activity.

BIDIRECTIONAL DEHYDRATION USING THE ISODRÄN BOARD Ground slab construction is currently the most common foundation methodology in the construction of houses. By choosing the ISODRÄN board you benefit the environment in two ways. Good thermal insulation capacity leads to low heating costs and reduces the quantity of material required which leads to reduced transportation during the construction process, which benefits both the environment and your expenditure .

LOOK is one of the latest LED products from SIMES, engineered to maximize the LED power, whilst minimizing the size and energy consumption. Available in different versions, as wall mounted and as bollard, LOOK family introduces a new way to light up outdoor spaces. Confirming the SIMES high quality standards, these fittings are made using aluminum with low content of copper and highly robust glass. LOOK has an elegant rectangular body, minimal and compact, mounted on wall or on its bollard. The light is directed on one side through a glass window.

LOOK is one of the latest LED products from SIMES, engineered to maximize the LED power, whilst minimizing the size and energy consumption. Available in different versions, as wall mounted and as bollard, LOOK family introduces a new way to light up outdoor spaces. Confirming the SIMES high quality standards, these fittings are made using aluminum with low content of copper and highly robust glass. LOOK has an elegant rectangular body, minimal and compact, mounted on wall or on its bollard. The light is directed on one side through a glass window.

SKILL BOLLARD completes the Skill range with the same excellent peculiarities: elegant design, low consumption and high lighting performances. Furthermore, thanks to a detailed study of the base, its solidity and stability make it particularly suitable for residential areas and public pathways. SKILL BOLLARD is available in mono and bi-emission versions, both with a downward light distribution to fully respect norms against light pollution.

FG–approved door solution for single-leaf aluminium door with Door Operator PSW250. Security Cylinder Triton+ is constructed to provide the best protection against burglary. Pull Handle TrioVing Line is suitable for all types of environments. PSW250 is one of the most powerful, safest and most flexible swing door operators on the market. Slender design, low noise level, high performance and wide selection of accessories. Convenience, confidence and safety. Door solution is adapted to TEK10/NS11001 Universal Design. Typical applications: Office/Commercial, Shopping mall/Retail. For more information, please contact us: http://www.trioving.no/contact-project-team

Solution for double-leaf aluminium door with SMARTair™ wall-mounted card reader. SMARTair™ is an efficient, wireless access control system utilising Mifare technology in one simple, contactless and user friendly solution, without need for keys or cables. PSW250 is one of the most powerful, safest and most flexible swing door operators on the market. Slender design, low noise level, high performance and wide selection of accessories. Convenience, confidence and safety. Door solution is adapted to TEK10/NS11001 Universal Design. Typical applications: Residential/Cabin, Office/Commercial, Industry, Government/Municipality. For more information, please contact us: http://www.trioving.no/contact-project-team

An acronym for rest-eat-work. This new creation by Rafa García is tremendously versatile, and can be used for a variety of diverse projects that require pieces for resting, eating or working. Rest. An entire family of chairs, sofas and modules, as light as they are comfortable, can be used with two different types of arm: one is high and thin like the backs and the other is low and soft, like the base of the design.

21.1 is a single 21 pendant hung from a round canopy. The pendant is designed to hang either alone or with a clustering of 21.1 chandeliers. Solitary pendants can be used to highlight areas of a room, or in random groupings form an ambient chandelier. Inspired by the sporadic, perhaps discordant arrangement of barnacles on a rock surface, the 21 is fabricated from thin sheets of porcelain wrapped around frosted borosilicate glass trumpet-shaped diffusers. Each diffuser houses a low voltage (12V, 20W xenon) lamp. A strong contrast is established between the organically distributed soft light passing through the translucent white porcelain skin and the sharp, crisp light passing through the borosilicate glass diffuser.

With its variety of colours, formats and surfaces, KeraTwin® offers the architect an enormous freedom of design. And as diverse fastening alternatives ensure technical and constructional flexibility, this system offers the appropriate solution to every challenge – even on difficult bases. As facade system with the widest variety of colours, KeraTwin® permits every architect to realize its creative ideas. Thus, besides the colour range “SpectraView” developed by the designer Peter Zoernack with nine colour families harmoniously matched to each other and contrasting colours, the colour systems “Natura unglazed”, “Design unglazed” and “Design glazed” are also available. On request, the panels are also supplied with profiles which – due to their three-dimensional structure – can make large facades less monotonous and lend an entire building a distinctive character. The joints are realized in such a way that the construction is optimally protected against driving rain. With their relatively low weight of 32 kg/m², the panels are easy to transport and to install. KeraTwin cermic panels are HT-coated (Hydrophilic tile).

HÅG Capisco 8106 is delivered with a seat and back. The saddle seat can be adjusted between low and high working positions, all the way up to standing, enabling you to be more dynamic in your movements while still balanced. The seat height, seat depth and back height can be adjusted. Tilt resistance is adjustable and lockable. The footbase is delivered in black or silver-lacquered aluminium. Standard 200 mm gas lift. A footbase in polished aluminium is optional.

HÅG Capisco 8105 is uniquely suited to raised and height adjustable desktops. The saddle seat can be adjusted between low and high working positions, all the way up to standing, enabling you to be more dynamic in your movements while still balanced.

HÅG Capisco 8010 is a plastic chair that is delivered with a seat and back. The seat has an integrated cushion for improved comfort. The saddle seat can be adjusted between low and high working positions, all the way up to standing, enabling you to be more dynamic in your movements while still balanced. The seat height, seat depth and back height can be adjusted. Tilt resistance is adjustable and lockable. The footbase is delivered in black or silver-lacquered aluminium. Standard 200 mm gas lift. A footbase in polished aluminium, black plastic or blue-grey plastic is optional.

HÅG Capisco 8001 is a flexible stool with a saddle seat. The saddle seat can be adjusted between low and high working positions, all the way up to a sit-stand position, enabling you to be more dynamic in your movements while still sitting balanced. The plastic seat has an integrated cushion for improved comfort. The seat height and the seat depth can be adjusted. The five star base is delivered in black or silver-lacquered aluminium. Standard 200 mm gaslift. A five star base in polished aluminium, black plastic or blue-grey plastic is optional.

HÅG Capisco 8107 is delivered with a seat, back and headrest. The saddle seat can be adjusted between low and high working positions, all the way up to standing, enabling you to be more dynamic in your movements while still balanced. The seat height, seat depth and back height can be adjusted. Tilt resistance is adjustable and lockable. The footbase is delivered in black or silver-lacquered aluminium. Standard 200 mm gas lift. A footbase in polished aluminium is optional.

Easy chair, low back

Swivel chair, low back. 5-star alu. swivel base

Swivel chair low back, with upholstered seat and back

Easy chair, low back

Easy chair, low back

Easy chair, low back

Easy chair, low back

With a distinctive textured construction and a broad colour palette of 18 contemporary and commercially attractive tonal shades, Format has taken low loop pile tiles into a new dimension. This hardwearing heavy contract carpet tile, manufactured using new high tech tufting machines combines rich texture with densely packed low loops for superior aesthetic appeal and real added value. A universally attractive carpet tile suitable for heavy traffic environments in all types of commercial premises, Format boasts a high castor chair rating, making it an ideal and cost-effective solution for busy offices large and small.

One of a new generation of cleverly textured loop pile tiles from Tessera, Inline adds a completely new twist to the concept of linear design. Featuring rich, differential texture. Inline provides a strong directional pattern, randomly interspersed with patches of tonal relief. This ‘broken linearity’ and combination of high and low level loops, delivers a visually interesting backdrop for any commercial interior design scheme. The forgiving design masks tile edges resulting in a broadloom appearance when laid in monolithic fashion.

Barcode challenges the uniformity and rigidity of conventional linear low level loop pile tiles and, with its confident bands of contrasting colours in varying widths, delivers a more eclectic and exuberant look that is right on trend for today’s commercial environments. Barcode is offered in 18 colourways, each featuring five individual tonal and contrasting shades drawing from the latest colour palette of solution dyed yarns, carefully selected and blended to harmonise with a wide range of interior design schemes. Barcode can be laid in a variety of styles including brick, tessellated, quarter-turn or the quirky alternative, quarter-brick, to create a range of different aesthetic effects.

It’s human nature to be creative. As designers we know that when we follow nature’s example, designing spaces that ignite our senses through light, color, texture and detail, we also spark the creative spirit in each of us. Human Nature Collection was designed as a beautiful foundation for those spaces, made up of five different textures in 25cm x 1m skinny planks. Borrowing from natural elements, HN810™, HN850™ and HN840™ placed in sequence blend seamlessly in an organic movement that shows no hint of the corners or edges of the tile. HN820™ and HN830™ extend the range from very low profile to wildly-full and neutral to colorful. (carpet tile)

It’s human nature to be creative. As designers we know that when we follow nature’s example, designing spaces that ignite our senses through light, color, texture and detail, we also spark the creative spirit in each of us. Human Nature Collection was designed as a beautiful foundation for those spaces, made up of five different textures in 25cm x 1m skinny planks. Borrowing from natural elements, HN810™, HN850™ and HN840™ placed in sequence blend seamlessly in an organic movement that shows no hint of the corners or edges of the tile. HN820™ and HN830™ extend the range from very low profile to wildly-full and neutral to colorful. (carpet tile)

It’s human nature to be creative. As designers we know that when we follow nature’s example, designing spaces that ignite our senses through light, color, texture and detail, we also spark the creative spirit in each of us. Human Nature Collection was designed as a beautiful foundation for those spaces, made up of five different textures in 25cm x 1m skinny planks. Borrowing from natural elements, HN810™, HN850™ and HN840™ placed in sequence blend seamlessly in an organic movement that shows no hint of the corners or edges of the tile. HN820™ and HN830™ extend the range from very low profile to wildly-full and neutral to colorful. (carpet tile)

It’s human nature to be creative. As designers we know that when we follow nature’s example, designing spaces that ignite our senses through light, color, texture and detail, we also spark the creative spirit in each of us. Human Nature Collection was designed as a beautiful foundation for those spaces, made up of five different textures in 25cm x 1m skinny planks. Borrowing from natural elements, HN810™, HN850™ and HN840™ placed in sequence blend seamlessly in an organic movement that shows no hint of the corners or edges of the tile. HN820™ and HN830™ extend the range from very low profile to wildly-full and neutral to colorful. (carpet tile)

It’s human nature to be creative. As designers we know that when we follow nature’s example, designing spaces that ignite our senses through light, color, texture and detail, we also spark the creative spirit in each of us. Human Nature Collection was designed as a beautiful foundation for those spaces, made up of five different textures in 25cm x 1m skinny planks. Borrowing from natural elements, HN810™, HN850™ and HN840™ placed in sequence blend seamlessly in an organic movement that shows no hint of the corners or edges of the tile. HN820™ and HN830™ extend the range from very low profile to wildly-full and neutral to colorful. (carpet tile)

Reduced profile elevations leading to maximum transparency: With its integrated pressure profile WICTEC 50 offers an inexpensive solution with a design similar to structural glazing. The glazing technology with a flush or low pressure profile the assembly is as fast and easy as for a classic stick system curtain wall. System test results / CE product pass in accordance with DIN EN 13830 Air permeability: Class AE Watertightness: RE 1200 Resistance to wind load: 2000 / –3200 Pa, security 3000 / –4800 Pa Impact resistance: Class E5 / I5 Burglar resistance: RC1N Quality assurance: Certified according to ISO 9001:2008 Environmental management: Certified according to ISO 14001

The fixed frame windows are maintenance free and designed for a lifetime of 60 years. The glazing frame comes in powder coated aluminium and is available in various colours. The core is a super strong and insulating composite material. The inside comes in factory painted nordic wood but can also be ordered in oak, teak, beech etc. The windows are available in all types of glass or combination of glass such as self-cleaning, low energy, solar & thermal regulating, safety, noise reduced or decorative glass. U-values ​​down to 0.7. A variety of glazing bars are available.

The fixed frame windows are maintenance free and designed for a lifetime of 60 years. The glazing frame comes in powder coated aluminium and is available in various colours. The core is a super strong and insulating composite material. The inside comes in factory painted nordic wood but can also be ordered in oak, teak, beech etc. The windows are available in all types of glass or combination of glass such as self-cleaning, low energy, solar & thermal regulating, safety, noise reduced or decorative glass. U-values ​​down to 0.7. A variety of glazing bars are available.

The fixed frame windows are maintenance free and designed for a lifetime of 60 years. The glazing frame comes in powder coated aluminium and is available in various colours. The core is a super strong and insulating composite material. The inside comes in factory painted nordic wood but can also be ordered in oak, teak, beech etc. The windows are available in all types of glass or combination of glass such as self-cleaning, low energy, solar & thermal regulating, safety, noise reduced or decorative glass. U-values ​​down to 0.7. A variety of glazing bars are available.

The fixed frame windows are maintenance free and designed for a lifetime of 60 years. The glazing frame comes in powder coated aluminium and is available in various colours. The core is a super strong and insulating composite material. The inside comes in factory painted nordic wood but can also be ordered in oak, teak, beech etc. The windows are available in all types of glass or combination of glass such as self-cleaning, low energy, solar & thermal regulating, safety, noise reduced or decorative glass. U-values ​​down to 0.7. A variety of glazing bars are available.

The fixed frame windows are maintenance free and designed for a lifetime of 60 years. The glazing frame comes in powder coated aluminium and is available in various colours. The core is a super strong and insulating composite material. The inside comes in factory painted nordic wood but can also be ordered in oak, teak, beech etc. The windows are available in all types of glass or combination of glass such as self-cleaning, low energy, solar & thermal regulating, safety, noise reduced or decorative glass. U-values ​​down to 0.7. A variety of glazing bars are available.

The fixed frame windows are maintenance free and designed for a lifetime of 60 years. The glazing frame comes in powder coated aluminium and is available in various colours. The core is a super strong and insulating composite material. The inside comes in factory painted nordic wood but can also be ordered in oak, teak, beech etc. The windows are available in all types of glass or combination of glass such as self-cleaning, low energy, solar & thermal regulating, safety, noise reduced or decorative glass. U-values ​​down to 0.7. A variety of glazing bars are available.

The inward opening window is a convenient window that can be provided with hinges in the side, bottom or both. The window with hinges in both the side and bottom is called Kipp-Dreh and can be opened in the top for easy and efficient ventilation, and inward opening that provides a great wash position. You stand inside and wash the outside of the glass. All opening functions are easy to operate with one hand. The window can be made as one, two or multi sash windows and often in combination with fixed frame window in the same unit. The window is available with a variety of glazing bars. The window is available in all types of glass or combination of glass such as self-cleaning, low energy, solar & thermal regulating, safety, noise reduced or decorative glass. U-values ​​down to 0.8.

The inward opening window is a convenient window that can be provided with hinges in the side, bottom or both. The window with hinges in both the side and bottom is called Kipp-Dreh and can be opened in the top for easy and efficient ventilation, and inward opening that provides a great wash position. You stand inside and wash the outside of the glass. All opening functions are easy to operate with one hand. The window can be made as one, two or multi sash windows and often in combination with fixed frame window in the same unit. The window is available with a variety of glazing bars. The window is available in all types of glass or combination of glass such as self-cleaning, low energy, solar & thermal regulating, safety, noise reduced or decorative glass. U-values ​​down to 0.8.

The top swing window is a maintenance free window which is easy to operate and wash. The window can be locked in “air position” or completely turned around without touching drapes or other objects. The glazing frame comes in powder coated aluminium and is available in various colours. The inside comes in factory painted nordic wood but can also be ordered in oak, teak, beech etc. The window is available with a variety of glazing bars. The window is available in all types of glass or combination of glass such as self-cleaning, low energy, solar & thermal regulating, safety, noise reduced or decorative glass. U-values ​​between 0.8 and 1.2. The Top Swing window is maintenance free and designed for a lifetime of 60 years.

The top swing window is a maintenance free window which is easy to operate and wash. The window can be locked in “air position” or completely turned around without touching drapes or other objects. The glazing frame comes in powder coated aluminium and is available in various colours. The inside comes in factory painted nordic wood but can also be ordered in oak, teak, beech etc. The window is available with a variety of glazing bars. The window is available in all types of glass or combination of glass such as self-cleaning, low energy, solar & thermal regulating, safety, noise reduced or decorative glass. U-values ​​between 0.8 and 1.2. The Top Swing window is maintenance free and designed for a lifetime of 60 years.

ASSA ABLOY UK single timber/wood door, single acting with vision panel and ironmongery; of nominal width 986mm and 2089mm height. Finish options include , Powder Coated, Painted, Veneered and Laminated Performance - Low opening force to comply with Equality Act using CAM-Motion® technology - Rated as ‘severe duty’ to DD171, suitable for use in education and healthcare - Acoustic rating of 33dB Safety - Fire rating FD30S - Finger guard included Sustainability - Forest Stewardship Council (FSC) - Programme for the Endorsement of Forest Certification (PEFC) - Environmental Product Declaration, CAM-Motion® closer (EPD-ASA-20130275-IBC1-EN) - Provides a 9 year Whole Life Cost when fitted in an educational application Compatible Standards: EN 1935, EN1154, EN 12209, EN 1303, DD171, BS476 Pt 22&31, ISO 10140, EU Timber Regulation, FSC, PEFC Typical application markets: Secondary Schools, Colleges and Universities For more information, please contact us on www.assaabloy.co.uk/contact-specification-team

ASSA ABLOY UK single timber/wood door, single acting with vision panel and ironmongery; of nominal width 986mm and 2089mm height. Finish options include , Powder Coated, Painted, Veneered and Laminated Performance - Low opening force to comply with Equality Act using CAM-Motion® technology - Rated as ‘severe duty’ to DD171, suitable for use in education and healthcare - Acoustic rating of 38dB Safety - Fire rating FD60S - Finger guard included Sustainability - Forest Stewardship Council (FSC) - Programme for the Endorsement of Forest Certification (PEFC) - Environmental Product Declaration, CAM-Motion® closer (EPD-ASA-20130275-IBC1-EN) - Provides a 18 year Whole Life Cost when fitted in an educational application Compatible Standards: EN 1935, EN1154, EN 12209, EN 1303, DD171, BS476 Pt 22&31, ISO 10140, EU Timber Regulation, FSC, PEFC Typical application markets: Secondary Schools, Colleges and Universities For more information, please contact us on www.assaabloy.co.uk/contact-specification-team

ASSA ABLOY UK single timber/wood door, single acting with vision panel and ironmongery; of nominal width 986mm and 2089mm height. Finish options include , Powder Coated, Painted, Veneered and Laminated Performance - Low opening force to comply with Equality Act using CAM-Motion® technology - Rated as ‘severe duty’ to DD171, suitable for use in education and healthcare - Acoustic rating of 33dB Safety - Fire rating FD30S Sustainability - Forest Stewardship Council (FSC) - Programme for the Endorsement of Forest Certification (PEFC) - Environmental Product Declaration, CAM-Motion® closer (EPD-ASA-20130275-IBC1-EN) - Environmental Product Declaration, SMARTair™ escutcheon (EPD-ASA-20150162-IBA1-EN) - Provides a 23 year Whole Life Cost when fitted in a local healthcare application Compatible Standards: EN 1935, EN1154, EN 12209, EN 1303, DD171, BS476 Pt 22&31, ISO 10140, EU Timber Regulation, FSC, PEFC Typical application markets: Local surgery/ clinical healthcare For more information, please contact us on www.assaabloy.co.uk/contact-specification-team

ASSA ABLOY UK unequal pair timber/wood door, single acting with vision panel and ironmongery; of nominal width 925+398m and 2089mm height. Finish options include , Powder Coated, Painted, Veneered and Laminated Performance - Low opening force to comply with Equality Act using CAM-Motion® technology - Rated as ‘severe duty’ to DD171, suitable for use in education and healthcare - Acoustic rating of 38dB Safety - Fire rating FD60S Sustainability - Forest Stewardship Council (FSC) - Programme for the Endorsement of Forest Certification (PEFC) - Environmental Product Declaration, CAM-Motion® closer (EPD-ASA-20130275-IBC1-EN) - Provides a 6 year Whole Life Cost when fitted in a healthcare application Compatible Standards: EN 1935, EN1154, EN 12209, EN 1303, DD171, BS476 Pt 22&31, ISO 10140, EU Timber Regulation, FSC, PEFC Typical application markets: Hospitals For more information, please contact us on www.assaabloy.co.uk/contact-specification-team

ASSA ABLOY UK single timber/wood door, single acting with vision panel and ironmongery; of nominal width 986mm and 2089mm height. Finish options include , Powder Coated, Painted, Veneered and Laminated Performance - Low opening force to comply with Equality Act using CAM-Motion® technology - Rated as ‘severe duty’ to DD171, suitable for use in education and healthcare - Acoustic rating of 33dB Safety - Fire rating FD30S Sustainability - Forest Stewardship Council (FSC) - Programme for the Endorsement of Forest Certification (PEFC) - Environmental Product Declaration, CAM-Motion® closer (EPD-ASA-20130275-IBC1-EN) - Provides a 12 year Whole Life Cost when fitted in a healthcare application Compatible Standards: EN 1935, EN1154, EN 12209, EN 1303, DD171, BS476 Pt 22&31, ISO 10140, EU Timber Regulation, FSC, PEFC Typical application markets: Hospitals For more information, please contact us on www.assaabloy.co.uk/contact-specification-team

FAAC J200 SA Semi-Automatic bollard resolves the problems of transit and/or parking control with no need of electric power supply (particularly suitable for areas difficult to wire). The gas actuator allows it to be lifted automatically with a key. It is lowered by pressing the head of the bollard. J200 SA main features are:: 1. Power supply and wiring not needed 2. Simple and safe movements thanks to the dedicated release key 3. Kept lock in up position (against accidental release) 4. Very low (and easy) maintenance needed 5. No pit needed: laying and civil works performed in a single operation 6. Easy transport, storage and laying thanks to the limited weight

FAAC J275 SA Semi-Automatic traffic bollard solves any transit and/or park control problems without the need of electric power supply (particularly suitable for old town centers and areas difficult to wire). In fact, thanks to a gas operator, raising occurs automatically by means of a key release. Lowering occurs by a foot pressure on the bollard head. J275 SA main features are:: 1. Power supply and wiring not needed 2. Simple and safe movements thanks to the dedicated release key 3. Kept lock in up position (against accidental release) 4. Very low (and easy) maintenance needed

The ideal option for guaranteeing very high thermal performance, even with low thickness, through the use of graphite particles encapsulated inside the special detensioned insulation panel. It ensures dimensional stability, perfect flatness and secure adhesion, even during maximum solar irradiation. The use of a single raw material confers constancy of the thermal properties of the entire thickness of the slab. The absence of any surface processing ensures a truly uniform product when skimming the render, thus ruling out the risk of infiltrations as generally ensuing from skimming and which, in time, could cause crackling of the façade.

The ideal option for combining high thermal efficiency and low insulation thickness. Especially suitable for upgrading the energy efficiency of existing buildings, due to its reduced thickness for equivalent insulation performance.

Shhhh! Did you hear that? - Probably not. Because our VCD ventilation drives create fresh air while staying as quiet as a mouse. They are our stylish climate control systems for controlled natural ventilation in living and working spaces. Is cabling the problem? Sunshine is all the VCD-S Solar chain drive needs to supply you with fresh air without the need for a cable.   The defining characteristics of the VCD Series - Stylish ventilation drive with narrow visible widths - Fast and easy installation - Especially low input power - Virtually inaudible operating noise - VCD-S with solar technology, ideally suited for retrofitting performance features - For façade windows, roof windows and ventilation flaps in conservatories - Also direct control via 230 V AC possible - With motor electronics controlled via microprocessor - Special chain stabilisation and centred chain outlet - "TMS+" tandem safety function for operating 2 drives on one sash - Option of chain stroke programming via magnet - Reprogrammed opening stroke is transmitted to the tandem drive - Direct cable guidance between the drives for visually appealing solution - Simple connection via plug connector - Programmable drive functions and different drive parameters - Running speed in CLOSED direction decreases to 5 mm/s (passive closing edge protection) - Time-controlled reversing when an obstacle is detected in the CLOSED direction (active closing edge protection)

Up for anything - Heavy windows, humid environments, high function demands while still maintaining low power consumption? Not a problem for this all-rounder! The robust rack and pinion drives of the ZA Series are simply ideal for heavy windows in roofs and façades.   The defining characteristics of the ZA Series - Incredible electronic and functional variety - Extremely high efficiency: low power consumption and yet tremendously powerful - Versatile application options - Corrosion-resistant thanks to an encapsulated unit - Available as a 230 V AC SHEV solution Performance features - Can be used for openings for smoke exhaust; D+H Euro SHEV in accordance with EN 12101-2; and for daily ventilation - With integrated BSY+ motor and synchronised electronics controlled via microprocessor - Direct control via 230 V AC - Option of up to 8 drives in one synchronous group - With motor electronics controlled via microprocessor - High speed function (HS) for especially fast opening windows in case of fire (SHEV) - Low current consumption thanks to high efficiency - Option of cable infeed above and below - Drive unit can be changed from left to right - Programmable drive functions and different drive parameters - Running speed in CLOSED direction decreases to 5 mm/s (passive closing edge protection) - Time-controlled reversing when an obstacle is detected in the CLOSED direction (active closing edge protection) - Integrated ACB (Advanced Communication Bus) bus interface with Modbus protocol - The drive is integrated directly via open bus communication through the ACB (Advanced Communication Bus), e.g. in a building management system

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

The Midori is a natural design made in ash wood. It comprises two chairs, with and without arms; one small armchair and two stools, high and low. The structure is stained in order to highlight the grain of the ash, choose your colour from the chart at the end of our price list. The armchair offers an optional decorative cushion, which increases the comfort of the piece and gives it a cosy, homely touch. The stools include a polished stainless steel footrest. The Midori is available in fabric, leather or synthetic leather.

The Midori is a natural design made in ash wood. It comprises two chairs, with and without arms; one small armchair and two stools, high and low. The structure is stained in order to highlight the grain of the ash, choose your colour from the chart at the end of our price list. The armchair offers an optional decorative cushion, which increases the comfort of the piece and gives it a cosy, homely touch. The stools include a polished stainless steel footrest. The Midori is available in fabric, leather or synthetic leather.

The Midori is a natural design made in ash wood. It comprises two chairs, with and without arms; one small armchair and two stools, high and low. The structure is stained in order to highlight the grain of the ash, choose your colour from the chart at the end of our price list. The armchair offers an optional decorative cushion, which increases the comfort of the piece and gives it a cosy, homely touch. The stools include a polished stainless steel footrest. The Midori is available in fabric, leather or synthetic leather.

The Midori is a natural design made in ash wood. It comprises two chairs, with and without arms; one small armchair and two stools, high and low. The structure is stained in order to highlight the grain of the ash, choose your colour from the chart at the end of our price list. The armchair offers an optional decorative cushion, which increases the comfort of the piece and gives it a cosy, homely touch. The stools include a polished stainless steel footrest. The Midori is available in fabric, leather or synthetic leather.

Low model for installation below window or storage areaNarrow fixture, only 380 mm wideRotating wall bracket for flexible attachment point in wall

Complete toilet set: BTW WC pan compact dual outlet, Low cistern with double push mechanism 4,5/3 litres, Fixed seat. Options: Soft closing seat, pull-out seat.

Complete toilet set : WC pan vertical outlet, Low cistern with double push mechanism 6/3 litres, Fixed seat. Options: Soft closing seat, pull-out seat.

Complete toilet set: BTW WC pan compact dual outlet, Low cistern with double push mechanism 4,5/3 litres, Fixed seat. Options: Soft closing seat, pull-out seat.

Complete toilet set : WC pan horizontal outlet, Low cistern with double push mechanism 6/3 litres, Fixed seat. Options: Soft closing seat, pull-out seat.

Multipor inside insulation WI COMPACTplus The interior insulation system Multipor WI compact plus is a mineral insulation system for preventing mould and thermal bridge minimization. The compact and ecological interior insulation system showing its strengths where low insulation thickness (30 and 40 mm) an energetic improvement is to be achieved. It is purely mineral and can be ideally in the renovation of existing buildings to use, because it is flexible enough to adapt any geometry, and is quick and easy to process. Strong benefits The capillary active interior insulation Multipor WI compact plus makes an elaborate processing a vapor barrier unnecessary. The classification of the system into the building material class A - non-flammable - the system also makes it perfectly safe in case of fire. Even at the highest temperatures, it develops no smoke, toxic fumes and no flaming drops - benefits that can save lives. • Minimized thermal bridges • Permeable and capillary active • Without a vapor barrier in the system configuration • Prevents mold build-up • Improves the living comfort • Quick and easy processing • Effortless transport and simple site logistics Experience Long-term experience from over 15 years confirm that Multipor Interior Insulation Systems are the solution for modern, contemporary, energy-efficient wall interior insulation.

Multipor inside insulation WI COMPACTplus The interior insulation system Multipor WI compact plus is a mineral insulation system for preventing mould and thermal bridge minimization. The compact and ecological interior insulation system showing its strengths where low insulation thickness (30 and 40 mm) an energetic improvement is to be achieved. It is purely mineral and can be ideally in the renovation of existing buildings to use, because it is flexible enough to adapt any geometry, and is quick and easy to process. Strong benefits The capillary active interior insulation Multipor WI compact plus makes an elaborate processing a vapor barrier unnecessary. The classification of the system into the building material class A - non-flammable - the system also makes it perfectly safe in case of fire. Even at the highest temperatures, it develops no smoke, toxic fumes and no flaming drops - benefits that can save lives. • Minimized thermal bridges • Permeable and capillary active • Without a vapor barrier in the system configuration • Prevents mold build-up • Improves the living comfort • Quick and easy processing • Effortless transport and simple site logistics Experience Long-term experience from over 15 years confirm that Multipor Interior Insulation Systems are the solution for modern, contemporary, energy-efficient wall interior insulation.

TARASAFE ULTRA, ULTRA COMFORT, STYLE, UNI & GEO are slip resistant vinyl VC floorcoverings, with a PVC wear layer and deeply inlaid mineral crystal particles (patent pending) and coloured chips for a decorative design. There are reinforced with a glass fibre grid in sheet form. They are treated with SparClean® surface treatment, a low maintenance cost effective solution providing extreme resistance from soiling and staining. They are an ideal solution for heavy traffic applications where enhanced slip resistance, durability, hygiene and easy maintenance are required. Tarasafe is suitable for most commercial and industrial arrears, with a 12 year warranty. TARASAFE ULTRA COMFORT has a VHD closed cell foam backing yielding a 6dB sound insulation. The products are 100% recyclable. TARASAFE STANDARD, ELEMENTS, SUPER & PLUS are slip resistant vinyl VC floorcoverings, with a PVC wear layer and deeply inlaid mineral crystal particles (patent pending) and coloured chips for a decorative design. There are reinforced with a glass fibre grid in sheet form. They are an ideal solution for heavy traffic applications where enhanced slip resistance, durability, hygiene and easy maintenance are required. Tarasafe is suitable for most commercial and industrial arrears, with a 12 year warranty. TARASAFE PLUS comprises a textile backing for better adherence in wet areas. It helps reducing telegraphing. The products are 100% recyclable.

COPRIMAX is a special, highly vapour permeable paint for interiors. It has strong infilling properties, high coverage, excellent adhesion and resistance. Thanks to its formulation, based on acrylic resins in water dispersion, it is particularly recommended for use on new gypsum plasters, civil plaster, plaster and mortar mixes, and scagliola. The product has low odour levels, is non flammable and friendly to both humans and the environment.

EXTRAPAINT is a very washable, acrylic paint, for exterior and interior use, characterized by high coverage, excellent vapour permeability, water repellence and a finish that is smooth, matt and soft to the touch. Formulated with acrylic resins in water dispersion, pigments and fillers, it is indicated on normal plasters, either new or old, gypsum plasters, already painted walls (even with strong colours). It can also be applied in exterior. It is has a low level of odour, is non inflammable and is friendly to both humans and the environment.

SILKOS GENOVA by Oikos is an exterior coating giving either a troweled or a gravelly plaster finish.Thanks to its formulation of acril-siloxanic ninders in water dispersion, sand, selected marble grains (max 1mm) the product has an exceptional resistance to atmospheric agents, maintaining at the same time the vapour permeability of the surface and giving a high level of water repellency. It prevents the formation of mould and algae. can be used as a finish on all types of wall surface, on high diffusion or de-humidifying plasters and it is also suitable for use on thermal insulation systems. In the event that a greater level of prevention is needed towards mould and algae, it is recommended to add the indicated sanitizing additive STERYLPLUS to the product SILKOS GENOVA has a low Environmental Impact and is friendly to both humans and the environment.

MULTIFUND is a 100% acrylic, self dilating, water repellent, washable paint that gives an even matt velvet finish, guaranteeing, at the same time, high vapour permeability to the wall, high coverage, low thickness and an optimum yield. Characterized by optimum expansion over the surface, it is indicated on smooth surfaces and is an ideal base for decorative finishes The product is of the highest quality and conforms to the norm D.I.N 53 778. It has a low odour level, is non inflammable and is friendly to both humans and the environment.

RINFRESCA is a vapour permeable, washable, scented, acrylic paint, indicated for any kind of interior wall. Its formulation of acrylic resins in water dispersion, pigments and special additives aimed to help application and film formation, make it ideal for use on civil plasters, either new or old, gypsum plasters, already painted walls (light/pastel colours). It is a new kind of product that guarantees excellent washability and a particular velvet matt finish. The paint releases into the environment a pleasant refreshing scent. The product has a low odour level, is non inflammable and is friendly to both humans and the environment.

SIRIUS 2001 is a brilliant white, high covering, vapour permeable paint in water dispersion. It is characterized by a high grade of white. Its special formulation makes it suitable for use on any interior wall surface, especially when a good level of vapour permeability is required. It has a low level of odour, is non inflammable and is friendly to both humans and the environment.

STERYLPAINT is a special, vapour permeable, anti mould, washable paint that is particularly effective in the prevention of the development of mould and algae, especially in environments where there is a high level of humidity (kitchens, bathrooms, swimming pools etc.). The special bactericides and fungicides used in its formulation act on a wide range of micro organisms and protect the wall for a long time. It has a low level of odour, is non flammable and is friendly to both humans and the environment.

SUPERCOLOR is a highly washable, sanitizing, acrylic paint for interiors and exteriors, characterized by its high coverage, vapour permeability, water repellence and its smooth, matt finish. Formulated with acrylic resins in water dispersion, pigments and fillers, it is indicated on cement plasters, either new or old, gypsum plasters, already painted walls (even with strong colours). It can also be applied in exterior. It has a low odour level, is non inflammable and is friendly to both humans and the environment.

With over 10 million m2 already installed, Basis is Tessera’s most popular low loop pile carpet tile. Suitable for every type of commercial installation, Tessera Basis can be specified with confidence throughout the building, wherever an attractive and hardwearing modular floor covering is required. Manufactured from 100% Aquafil polyamide, with a high castor chair rating, it has the resilience and durability needed to contend with heavy traffic conditions often found in busy commercial environments. • Available in 32 modern colourways • Meets Ska rating criteria for M12 soft floor coverings • Contains over 50% recycled content by weight • 10 year guarantee • Also available with SOFTbac® secondary backing

Complete toilet set: WC pan BTW compact with dual outlet and bolt kit, low cistern with dual push-button mechanism 4,5/3 litres, fixed seat. Options: Soft closing seat.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS 40mm thickness is available in 1200mm wide rolls.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is an new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

Low height : 800 mm

Low height : 790 mm

The HS 330 offers unique design and exceptional comfort, combined with high-quality technology: · More light through large-scale glazings · Available up 580 0 x 2800 mm · Narrow sliding frame and frameless side elements · Easy lifting and sliding of sash up to 400 kg sash weight · Energy efficient and heating cost saving · Low heat emission due to triple glazing · No tripping hazard due to low threshold height · Attractive colours for individual design requests · Better stability due to glass fibre low threshold · Thoughened panes protect from injuries when glass breakages · Can be perfectly combined with all other Internorm window systems

The Cup table was designed by the trio Knudsen, Berg and Hindenes. This sofa table is a visually lightweight table that fits into most settings. With two heights, two colors and two bases, one can freely play around with different expressions. The table top is made of environmentally sound absorbing structural foam that provides a soft satin finish. Dimensions: Low H: 39 cm Ø: 54,5 cm High H: 43 cm Ø: 54,5 cm

The Clint chair designed by Tveit and Tornøe was awarded the Norwegian Award for Design Excellence in 2010. Clint has become a sales success due to its Scandinavian simplicity, good ergonomics and comfort.Clint is a thorough chair system with a wide range of options that cover the needs for seating furniture from the lounge areas to the boardroom. Clint is a chair family where all designs bear the family resemblance for a coherent interior design. Numerous possibilities for the choice of fabric / leather, various bases, armrests and low or high back makes for the perfect conference chair.

The Clint chair designed by Tveit and Tornøe was awarded the Norwegian Award for Design Excellence in 2010. Clint has become a sales success due to its Scandinavian simplicity, good ergonomics and comfort.Clint is a thorough chair system with a wide range of options that cover the needs for seating furniture from the lounge areas to the boardroom. Clint is a chair family where all designs bear the family resemblance for a coherent interior design. Numerous possibilities for the choice of fabric / leather, various bases, armrests and low or high back makes for the perfect conference chair.

Audio is our bestseller. The model has an upholstered back and seat, solid construction, high comfort, space-saving, cleaning friendly and can be equipped with simple and functional writing tablet solution. Audio is supplied as standard without armrests. Available in three different back heights; low, medium and high. The legs can be attached on both horizontal and vertical steps and fixed on the ‘nose’ of the step. . Supplementary folding seats can be mounted directly on the wall. Removable seat and back cushions for easy maintenance. Seat and back cushions are molded in cold molded foam Available with simple armrest. Simple writing tablet is available as in veneer or laminate with solid wood edging. Audio chairs can be mounted in a bow shape.

BeSeated is engineered and designed with future needs and solutions. The concept BeSeated is developed based on ideas from the user; modern, functional, thoughtful and flexible. BeSeated has clean, organic lines, manufactured in recyclable molded polypropylene (PP) plastic with polished aluminum details. BeSeated comes with high or low back. Single writing tablet in compact laminate, or fixed writing board in MDF. Front panel. Optional padded cushion on the seat, backrest and headrest Available with integrated power supply. Can be mounted on both vertical and horizontal steps and on boom. Textiles desired. Base and boom black eloxert aluminum.

ProSeat is our exclusive auditorium chair. The concept is built around a fundamental "backbone" to which all parts are attached. ProSeat is constructed with great flexibility and customization in mind, which allows configurations suitable to customer needs.The back rest is available in two heights; low, medium. Can be installed in all types of flooring, both horizontal and vertical steps, or on a beam. Removable seat and back cushions for easy maintenance. Seat and back cushions are molded in cold molded foam Single writing tablet is available as in veneer or laminate with solid wood edging. Also available with a folding writing table in the armrest, type Wrimatic. Proseat can be mounted in a bow shape.

Scala is our classic. Comes with veneer backrest and cushion. The model is space-saving, cleaning friendly and can be equipped with simple and functional writing tablet solution. Scala comes as standard without arm rests.Large selection of fabric and RAL colors on steel. Available in two back rest heights; low and medium. The legs can be attached on both horizontal and vertical steps and fixed on the ‘nose’ of the step. Supplementary folding seats can be mounted directly on the wall. Removable seat and back cushions for easy maintenance. Seat and back cushions are molded in cold molded foam Seat and back cushions are molded in cold molded foam Flatoval steel for extra strength. Available with simple armrest. Writing tablets are supplied standard in veneer or Formica laminat with solid wood edging. Scala chairs can be mounted in a bow shape.

The Savo Stool allows excellent freedom of movement and is suitable for just sitting every now and then - whether high up or low down. Typical uses are for the staff in nursery school or at a meeting by the coffee machine in the office. Savo Joi has a joystick function that allows freedom of movement in any direction. Savo Joi Studio has a five star base and comes with a gas stem that may be normal sized, long or even extra long with footrest.

As a step in our environment strategy has Disc as the one and first European luminare got the environmental label – The Swan. No visible screws or fastening clamps and the very low height has combined to the great success in the market.

Odeon wall-hung WC pan - Projection 54 cm, - deal height : low for children, raised for the disabled or people with mobility issues.

LED spotlight 31 x 14.5 x 3 cm: Spotlight: 230 V, 1 x 4 W, class II, IP44, Energy efficiency class A++ Comfrot: LED lighting provides high luminosity, quality color and instant on. Economical: LED lightbulbs offer 60 to 90% savings compared to incandescent lightbulbs with sodium and mercury, and 10 to 20% compared with energy-saving lightbulbs Safety: LED lightbulbs operate on low voltage (< 32v) and generate little heat, thus enhancing safety of installation and use Maintenance: LED lighing reduce replacement costs, due to long lifetimes (on average over 50,000 hours)

With its large dimensions, the DYNACO M3 COMPACT is an ideal interior flexible high speed roll up door for the industry and logistics. Its fast door cycle enables smooth internal traffic of goods and personnel. The interior high speed door keeps draught, humidity, dust and dirt out of your premises. A superior seal around the full perimeter of the flexible roll up door and the high operating speed result in significant energy savings. Low maintenance requirements and the advanced push-pull drive technology assure a long life time and a reduced cost of ownership for this high speed roll up door. Free of rigid elements in the curtain, DYNACO M3 COMPACT flexible roll up doors are safe for your staff and equipment. When accidentally dislodged, the door curtain will reinsert itself into its side guides, simply by opening and closing the roll up door.

Improve your logistics and public areas, warehouse transport and material handling with a DYNACO D-311 high speed roll up door for interior use. Its fast door cycle helps you to gain valuable time in your daily business activities. Significant energy savings, a better climate control and improved employee comfort result from the superior seal of this high speed door. Dust, dirt, humidity and draught are excluded from your working areas. The flexible PVC door curtain of this high speed roll up door can be printed with large pictures, icons, messages, warnings and safety or traffic instructions. This contributes to a safer and better work environment. Low friction side guides, a self-reinserting door curtain and a minimum of wearing parts, make the DYNACO D-311 roll up door maintenance friendly. Thanks to its slim design it can be installed in places where space is limited.

Low maintenance requirements, ease of use and a long life time, make the DYNACO M2 POWER high speed door an ideal exterior door for every industrial building, warehouse, hangar, production or transport facility. This medium sized high speed door is wind resistant up to class 4 of the European standard EN 12424. It remains operational even in bad weather. Combined with its fast door cycle it ensures smooth business activities at all times. The superior and tight seal of the DYNACO M2 POWER high speed roll up door keeps wind, rain, snow, dirt and cold outside your building. Together with the high opening and closing speed significant energy savings can be achieved. With a curtain free of rigid elements, the DYNACO M2 POWER is safe for your staff and equipment. When accidentally dislodged, the door curtain reinserts itself into the side guides after an open and close cycle. This avoids production down-time.

Install DYNACO M2 EMERGENCY flexible roll up doors in your industrial building and comply with safety regulations. Designed for intensive traffic flows, this high speed roll up door also offers an emergency exit. The flexible PVC door curtain of this emergency high speed roll up door has an ingenious T-shaped cut in the middle. When a person pushes on the indicated release spots the curtain splits into two symmetric flaps and the emergency exit opens. Once opened, the flaps of the emergency exit can easily be joined together again with a large zipper. It only takes a few minutes to make the flexible high speed roll up door fully operational again. The unique push-pull technology and a limited number of wearing parts keep maintenance requirements low. The self-reinserting flexible door curtain minimizes down-time of the high speed door in case of an accidental collision.

The DYNACO D-313 EMERGENCY roll up door is the slimmest high speed roll up door in the market with an integrated emergency exit. It offers the benefits of a fast action door and allows an easy escape in case of emergency. The flexible PVC door curtain of the DYNACO D-313 EMERGENCY door has an ingenious T-shaped cut in the middle. When a person pushes on the indicated release spots the curtain splits into two symmetric flaps and the emergency exit opens. This high speed roll up door enables a smooth flow of goods and people. Thanks to its slim design it can be installed in places where space is limited. It is a perfect high speed door for retail stores. Equipped with low friction side guides, a self-reinserting door curtain and a minimum of wearing parts, the DYNACO D-313 EMERGENCY roll up door requires little maintenance. Free of rigid elements in the curtain, this high speed door is safe for your staff and equipment.

Thanks to its specific design the DYNACO D-313 CLEANROOM is the slimmest high speed cleanroom roll up door in the market. Designed for inside use it requires limited space and is ideal for interlocks. The superior and tight seal of this cleanroom roll up door keeps contaminants out , prevents leak flow, minimizes air loss and maintains pressure levels. This enables energy savings and optimizes the operation of your cleanroom. The pressure resistant flexible PVC door curtain keeps cleanrooms in constant over- or under-pressure. Dust, airborne particles, humidity and high or low temperatures are excluded from your cleanroom. Equipped with low friction side guides, a self-reinserting door curtain and a motor incorporated into the drum, the DYNACO D-313 CLEANROOM roll up door requires little maintenance. With a curtain free of rigid elements, this high speed door is the safest in the market for your staff and equipment.

Designed for cold storage applications the DYNACO M2 FREEZER roll up door allows fast traffic in and out your freezer room, minimizing temperature variations. Its excellent seal limits the loss of cooled air and saves energy. An optional insulation curtain mounted on the high speed freezer door reduces condensation and frost. It forms an extra barrier between warm outside temperatures and cold inside temperatures. Low consumption electric heating cables in the side posts of this high speed freezer door reduce frost and avoid down-time. Combined with the self-reinserting door curtain this guarantees a long lifetime of the roll up door. A DYNACO M2 FREEZER roll up door is safe for people, products and vehicles. The flexible door curtain is free of rigid parts. It avoids injuries and damage.

Ditec Civik is the pedestrian door operator for interior sliding doors with one or two wings, versatile, silent, easy to install. It features extremely compact sizes (both width and height) and a trendy silver (EURAS C0) finish. It's the architects' choice for its slim and modern look, perfect with full glass and technical glass attachments. Ditec Civik is designed for up to 80 kg (2 wings) and the 24 V dc gear motor with encoder ensures smooth, fluid movement and maximum safety of installation and operation. The automation system is set as a standard in Low Energy function for maximum safety of use. The Control Unit and accessories allow to tune the setting of the door, offering various operating modes: PUSH&OPEN, PULL&CLOSE, sensor-based opening, push-button opening, or opening via radio using the GOL4 remote controls or a special radio function selector. Customers are always sure to find the setting level they require. Ditec Civik fully complies to relevant International Standards.

Ditec DAB205 is the top-of-the-range solution for swing-door applications. The slim and elegant design makes this product perfect for every environment. DAB205 is equipped with an extremely powerful gear motor that opens the door and assists during closing, supported by a spring; the performance is the highest in its market segment, with door weight up to 400 kg or door width of over 1.6 m. The advanced Control Unit makes it easy to adjust door setting and control kinematic performance. With Ditec DAB205, the user has a complete control of the door operations, with the ability to choose the operating mode that best meets their requirements, including PUSH&GO, Power Assist and Low Energy modes. Ditec DAB205 also provides advanced management of double swing doors, which make it the perfect choice in many high demanding environments such as hospitals, shopping malls and public transportation stations. A wide choice of accessories and control devices completes the product range. Ditec DAB205 fully complies with all European directives including EN 16005.

The Entrematic EM PSW250 swing door operator is one of the most powerful, safe and flexible door operators in the market. Slim design, silent operation, high performance and a wide range of accessories for convenience, safety and security makes the Entrematic EM PSW250 swing door operator the ideal choice for almost any application, for example in healthcare-, commercial- and public buildings. The Entrematic EM PSW250 delivers low noise during operation and it is the ideal choice for applications with high demands on gentle and smooth operation in combination with strength and high traffic flow. It compensates for stack pressure and wind load and yet remains easy to open manually also for less abled users. An optional embedded battery back-up and monitoring ensures operation even when the power is interrupted, while an intelligent locking function adds maximum possible security.

Due to a force of 400 N in a very compact housing of just 35 x 24 mm (W x H), KS4 chain drives are currently the most powerful NSHEV drives of this class in the international market. The new and unique, on both sides mounted connector solution allow a series connection of up to three drives and a locking drive. The direct mounting without consoles as well as the M-COM for self-learning configuration in multi-drive systems greatly simplify the installation. The integrated microprocessor can communicate via data bus with control units of AUMÜLLER. In the context of modern façade automation systems, different situational speeds and forces can thus be driven. [LIST] Electronic speed control for smooth motor running Low noise due to vibration-bearing motor Suitable for surface mounted drives and concealed fitting within profiles Universal brackets and casement brackets for all common profile systems Sidebow roller chain of high-quality stainless steel with recessed rivets heads, for large opening angles with the smallest possible bending radii Chain completely retracts into the housing to ease profile integrated mounting of the drives Programmable feedback contact for end positions "CLOSED" or "OPEN" Two-sided connector for connecting cable, protected against polarity reversal M-COM for automatic synchronised run of multi drive applications and automatic sequence control with FV locking drives (S3/S12 SW V2) [/LIST]

KSA chain drives from AUMÜLLER are manufactured with the forces of 600 N and 1200 N. Due the compact drive housing, KSA chain drives are ideally suitable for the reliable opening and closing of windows in facades and roofs. [LIST] Electronic speed regulation for synchronised running of the drives and specially low noise development when in ventilation operation Z-version: programmable feedback limit position “OPEN” or “CLOSE” Suitable for surface mounted drives Robust, corrosion-resistant design Universal brackets and casement brackets for all common profile systems Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours Particularly easy to install paintable cover profile with a length of up to 4.5 m, suitable for covering one or several drives over the complete window width/height The connection cable can be run out of the housing on either side Programmable parameters of intelligent S12 electronic cut-off switch: Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control Soft start and soft stop at the end of stroke control Stroke length, closing force, speed Reversing the direction in overload cut-off during the shift Rebate control M-COM for automatic synchronised run of multi drive applications and automatic sequence control with FV locking drives (S3/S12 SW V2) [/LIST]

KSA chain drives from AUMÜLLER are manufactured with the forces of 600 N and 1200 N. Due the compact drive housing, KSA chain drives are ideally suitable for the reliable opening and closing of windows in facades and roofs. [LIST] Electronic speed regulation for synchronised running of the drives and specially low noise development when in ventilation operation Suitable for surface mounted drives Robust, corrosion-resistant design Universal brackets and casement brackets for all common profile systems Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours Particularly easy to install paintable cover profile with a length of up to 4.5 m, suitable for covering one or several drives over the complete window width/height The connection cable can be run out of the housing on either side Programmable parameters of intelligent S12 electronic cut-off switch: Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control Soft start and soft stop at the end of stroke control Stroke length, closing force, speed Reversing the direction in overload cut-off during the shift Rebate control M-COM for automatic synchronised run of multi drive applications and automatic sequence control with FV locking drives (S3/S12 SW V2) [/LIST]

KSA chain drives from AUMÜLLER are manufactured with the forces of 600 N and 1200 N. Due the compact drive housing, KSA chain drives are ideally suitable for the reliable opening and closing of windows in facades and roofs. [LIST] Electronic speed regulation for synchronised running of the drives and specially low noise development when in ventilation operation TWIN- or D-type version with 2 chains and double force Suitable for surface mounted drives Robust, corrosion-resistant design Universal brackets and casement brackets for all common profile systems Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours Particularly easy to install paintable cover profile with a length of up to 4.5 m, suitable for covering one or several drives over the complete window width/height The connection cable can be run out of the housing on either side Programmable parameters of intelligent S12 electronic cut-off switch: Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control Soft start and soft stop at the end of stroke control Stroke length, closing force, speed Rebate control Reversing the direction in overload cut-off during the shift M-COM for automatic synchronised run of multi drive applications and automatic sequence control with FV locking drives (S3/S12 SW V2) [/LIST]

KSA chain drives from AUMÜLLER are manufactured with the forces of 600 N and 1200 N. Due the compact drive housing, KSA chain drives are ideally suitable for the reliable opening and closing of windows in facades and roofs. [LIST] Electronic speed regulation for synchronised running of the drives and specially low noise development when in ventilation operation TWIN- or D-type version with 2 chains and double force Suitable for surface mounted drives Robust, corrosion-resistant design Universal brackets and casement brackets for all common profile systems Housing of natural, anodised aluminium, RAL9016 or upon request in other RAL colours Particularly easy to install paintable cover profile with a length of up to 4.5 m, suitable for covering one or several drives over the complete window width/height The connection cable can be run out of the housing on either side Programmable parameters of intelligent S12 electronic cut-off switch: Synchronised multi-operation of up to 4 opening and 2 locking drives with sequence control Soft start and soft stop at the end of stroke control Stroke length, closing force, speed Reversing the direction in overload cut-off during the shift Rebate control M-COM for automatic synchronised run of multi drive applications and automatic sequence control with FV locking drives (S3/S12 SW V2) [/LIST]

Lyfta 140 is a nursingtable with or without a built-in washing area to the right or left. Lyfta is a changing table that requires neither ladders nor stairs but still meets the need to mini- mize the number of lifts up onto the changing table. Lyfta has a minimum hight that is so low that children can easily climb up on the changing table from floor level. Then it is a simple matter of setting the correct working height with the controller.

The first facade system to be classified with European Technical Approval Fire Protection Class A, Alprotect Nova combines unique patented carbon technology and nano-hybrid binders, resulting in a mineral wool external wall insulation system that sets new standards in terms of protection and durability. The system formulations can also be applied with light reflectance values as low as 5, ensuring most shades of colour including dark ones and even black can be used successfully for the façades finish.

The KS 430 offers modern design and excellent comfort combined with high-quality technology: · More light through large-scale glazings · Soft/lift as standard for easy operation · Available up to 5800 x 2800 mm · Narrow sliding frames and frameless side elements · Easy operation of sash up to 400 kg sash weight · Energy efficient and heating cost saving · No tripping hazard due to low threshold height · Attractive colours for individual design requests · Better stability due to glass fibre low threshold · Thoughened panes protect from injuries when glass breakages · Can be perfectly combined with all other Internorm window systems

The first facade system to be classified with European Technical Approval Fire Protection Class A, Carbon Extra combines unique patented carbon technology and nano-hybrid binders, resulting in a mineral wool external wall insulation system that sets new standards in terms of protection and durability. The system formulations can also be applied with light reflectance values as low as 5, ensuring most shades of colour including dark ones and even black can be used successfully for the façades finish.

The Freedesk Desk Riser transforms your workspace from being stationary to a height adjustable desk, in seconds. It is designed to fit in everywhere and to create a vertically adjustable workspace wherever you are. When folded, the table is only 22 mm/ 0,87 inches thick. The low weight and the modest size makes the Desk Riser the ultimate height adjustable solution for locations where mobility and aesthetics are important. The "Original" model works both with a Lap Top and with a separate light-weight monitor and separate keyboard.

The Freedesk Desk Riser transforms your workspace from being stationary to a height adjustable desk, in seconds. It is designed to fit in everywhere and to create a vertically adjustable workspace wherever you are. When folded, the table is only 22 mm/0,87 inches thick. The low weight and the modest size makes the Desk Riser the ultimate height adjustable solution for locations where mobility and aesthetics are important. The "Compact" model works perfectly with a Lap Top, and leaves additional space for your accessories.

[LIST] Rockfon Blanka Activity is designed for classrooms and open plan offices where speech intelligibility is crucial and noise and activity levels are very high. The smooth, non-directional surface of Rockfon Blanka Activity reduces installation time and the 40mm thickness ensures the highest sound absorption at low frequencies. The enhanced surface durability makes it more resistant to dirt and everyday wear and tear, extending the product lifetime. [/LIST]

Facing Brick Smooth White Álava is the affordable choice for those projects that look for a white expression in their façades. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

It stands as the purest white model of La Paloma Cerámica y Gres. A unique texture combined with its spectacular color, make White Smooth Ártico the most in demand among the wide range of La Paloma Cerámica y Gres. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1145 x 1150mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

HYBRIS is a new insulation material generally used for roof, wall, ceiling and suspended timber floor applications, especially suitable for timber/steel frame and masonry construction. HYBRIS is a reflective insulation product based on a honeycomb structure made of shaped polyethylene foams glued to aluminium coated polyethylene foils. High thermal performance is provided by a special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external films provide additional thermal resistance, when associated with air cavities. HYBRIS is easily installed between rafters, timber studs or within floor joists. It accurately fits all widths, held in place by compression. HYBRIS does not slump down. HYBRIS is available in panels of 1150 x 2650mm and in a range of thicknesses from 50mm to 205mm.

A beautiful white smooth color that offers striking expressions, White Navarra provides high aesthetic and technical characteristics. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

White Oporto stands out by its smooth sand colour which provides an elegant and shiny look to the façade. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Grey Alicante is the lightest grey of La Paloma Cerámicas. It represents the required transition from white to grey in order to provide an entire color range. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Characterised by slight differences in its tone, Grey Escorial Smooth Brick plays with dark and light tonalities providing spectacular finishes in building façades. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Grey Otero Smooth Brick is presented as the most regular tone within the grey range of La Paloma Cerámicas. With a lighter appearance than Gris Escorial, Gris Otero is one of the most demanded models among klinker quality for both, the current architectural trend and its neutral color. Gris Otero is often used in different combinations. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Brown Asturias presents a brown hue that denotes a slight reddish tint, giving to the product strong charcter and to the façade, simplicity and elegance. This is the intermediate model among the brown range, just below Marrón Laredo and with less prone to red tone than Marrón Mieres. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Brown Galicia presents a brown color with slight differences in tone that provides to building façades high aesthetic and technical characteristics. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Brown Laredo is the darkest model with the most intense pigmentation of the brown range. A higher intense and traditional brown that approaches to what in general speaking is known as "chocolate brown". The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Brown Mieres has the lightest tone within the brown range, located in a chromatic scale between brown and red. Keeping on with current market demands, La Paloma Cerámicas offers a wide range of possibilities for projects that address this range of color. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Negro Lanzarote is the most purely black of La Paloma Cerámicas. Either with clear or dark mortar joints creates in buildings façades an effect of special elegance. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Timanfaya Blue especially attracts attention because of its special set of dark chromatics, offering an alternative to traditional blue façades. With sunlight, its sides offer a spectacular and different set of brightness giving a characteristic flashing image to the façade. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Black Orotava is the third in joining to the range of different blacks. Each one of these models covers a specific market demand. In this case, Negro Orotava brings to the architcts a less dark version of Negro Lanzarote Facing Brick. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Aragón Smooth Ochre is halway in intensity among the ochre range characterised for its variety in tones. Guadarrama will be the bick with less intensity and Castilla will be the darkest choice. Aragón works extremely well in natural environments, for this reason, it is widely used in residential areas with parks and gardens. The 4-face finish allows maximum use of the two stretches, saving in costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Clinker brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Castilla is the original among the ochre flashing range. With an unmistakable appearance countless examples of homes with Castilla Facing Brick are observed along the Spanish geography. Castilla Facing Brick works extremely well in natural environments, for this reason is widely used in residential areas with parks and gardens. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Guadarrama presents the clearest tone of the ochre flashing range. Since company origins this model has accompanied the catalogue and still working perfectly with greater acceptance in residential houses than in buildings, although there are examples of buildings with grat architectural value). The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Levante is a classic model in the catalogue of La Paloma Cerámicas. With an ochre hue and a very slight flashing, Levante draws smooth chromatics in façades. It is ideal for rustic environments. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Red Bilbao is the brick within the red range that does not present tonality variation. With high demand in the north of Spain, its klinker quality gives excellent performance to harsh climates. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Very characteristic from the British Islands, Red Inglés presents different tones of red which randomly placed, shapes an excellent aesthetic. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Red Granada is characterised by its red variety of tones. This unique way of shaping façades, adds aesthetic value in conjuction with a clear mortar joint. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Blue Cobalto Glazed Brick gives light and vitality to the façade. It stands for its characteristic blue bright resistance to time. La Paloma Cerámicas combines a long backgroud manufacturing facing glazed bricks using the latest technology in order to reach high quality finishes. Glazed bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

The Satino Black Handtowel roll dispenser is a robust dispenser offering Cradle-to-Cradle certified handtowel on roll. It is economical in use and low maintenance for the cleaning staff because a second roll is already available in the system. It works free from electronics and can be filled with C2C paper, contributing to the most sustainable washroom concept in the world.

The Satino Black toiletpaper dispenser is compact but offers a large capacity. The refill frequency for cleaning staff is low, because of the second toilet roll which can be placed inside the dispenser. Because of its design it offers maximal hygiene and is easy to clean. This Satino Black toiletpaper dispenser is an ideal solution for toilet areas with high traffic. It is the absolute top in sustainabilty. The dispenser is produced from recycled ABS and is Cradle to Cradle certified. After its economic life, the dispenser is returned and use as a raw material for new dispensers.

The Satino Black toiletpaper dispenser is compact but offers a large capacity. The refill frequency for cleaning staff is low, because of the second toilet roll which can be placed inside the dispenser. Because of its design it offers maximal hygiene and is easy to clean. This Satino Black toiletpaper dispenser is an ideal solution for toilet areas with high traffic. It is the absolute top in sustainabilty. The dispenser is produced from recycled ABS and is Cradle to Cradle certified. After its economic life, the dispenser is returned and use as a raw material for new dispensers.

The Satino Black Jumbo roll toiletpaper dispenser is a sustainable, Cradle-to-Cradle certified dispenser with a large capacity. Refill frequency is therefor low, making it an ideal solution for toilet areas with high traffic. Both the dispenser as the toiletpaper are C2C certified making it the most sustainable washroom concept in the world.

The Satino Black BriQ Toiletpaper dispenser is the perfect solution for those who are looking for a trendy, sophisticated design in matt black. Its compact design with high capacity is ideal in washrooms with limited space experiencing low to mid traffic. Both the dispenser as the refill are Cradle-to-Cradle certified making it the most sustainable washroom concept in the world.

Kitchen mixer with low spout. Ecosafe Mixer with coldstart and soft closing function. Adjustable flow control and temperaturelimiter. Chrome RSK 8309111 LVI 6258298 VVS 705765404 83200010 RSK 8309112 NRF 4300961

Kitchen mixer with low spout and dishwasher connection. Ecosafe Mixer with coldstart and soft closing function. Adjustable flow control and temperaturelimiter. Chrome RSK 8309115 LVI 6258304 83210010 with 3/8" connection RSK 8309116 NRF 4300963 83216000 RSK 8309118

White Pirineo Matt is the white matt alternative for those projects that look for avoid glossy elements that could distort the original chromatic appearance reqired. It presents a pure white, giving to façades the advantages inherent to this color. La Paloma Cerámicas combines a long backgroud manufacturing facing bricks using the latest technology in order to reach high quality finishes. Pirineo bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

White Pirineo Glazed sets the white difference in façades due to its versatility and adaptability to the environment. A set of brights makes the building an "artistic expression". La Paloma Cerámicas combines a long backgroud manufacturing facing bricks using the latest technology in order to reach high quality finishes. Pirineo bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Black Arrecife gives a clean appearance that stands for its homogeneity. La Paloma Cerámicas combines a long backgroud manufacturing facing bricks using the latest technology in order to reach high quality finishes. Arrecife bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Grey Glazed has a bright finish grey texture. Withing the most demanded models, current architectonic trends look for neutral colors and this grey is presented as an affordable option. La Paloma Cerámicas combines a long backgroud manufacturing facing glazed bricks using the latest technology in order to reach high quality finishes. Glazed bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Green Glazed stands for the intensity of its green bright color. It is especially suitable for residential areas. La Paloma Cerámicas combines a long backgroud manufacturing facing glazed bricks using the latest technology in order to reach high quality finishes. Glazed bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

The range of Brick Slips Klinker of La Paloma Cerámicas is the same as that of Facing Bricks (same texture and color). Easy to fix with adhesive (cement, glue…) and simple tools (trowel, toothed spatula, tile cutter and nails). Fast and easy. Both for renovation or new work, Brick Slip is a fast and clean choice for cladding. Blanco Ártico Brick Slip is the most in demand among the wide range of La Paloma Cerámicas Catalogue. Natural and permanent Colour. The beauty of the stoneware bricks produced by La Paloma Cerámica y Gres is permanent because it achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

The range of Brick Slips Klinker of La Paloma Cerámicas is the same as that of Facing Bricks (same texture and color). Easy to fix with adhesive (cement, glue…) and simple tools (trowel, toothed spatula, tile cutter and nails). Fast and easy. Both for renovation or new work, Brick Slip is a fast and clean choice for cladding. Gris Otero Brick Slip is presented as the most regular tone within the grey range of La Paloma. With a lighter appearance than Gris Escorial, Gris Otero is one of the most demanded models among klinker quality for architectural trend and its neutral color. Gris Otero is often used in different combinations. Natural and permanent Colour. The beauty of the stoneware bricks produced by La Paloma Cerámica y Gres is permanent because it achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

The range of Brick Slips Klinker of La Paloma Cerámicas is the same as that of Facing Bricks (same texture and color). Easy to fix with adhesive (cement, glue…) and simple tools (trowel, toothed spatula, tile cutter and nails). Fast and easy. Both for renovation or new work, Brick Slip is a fast and clean choice for cladding. Ocre Guadarrama Brick Slip presents the clearest tone of the ocre flashing range. Since company origins this model has accompanied the catalogue and still working perfectly with greater acceptance in residential houses than in buildings, although there are examples of buildings with grat architectural value. Natural and permanent Colour. The beauty of the stoneware bricks produced by La Paloma Cerámica y Gres is permanent because it achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

The range of Brick Slips Klinker of La Paloma Cerámicas is the same as that of Facing Bricks (same texture and color). Easy to fix with adhesive (cement, glue…) and simple tools (trowel, toothed spatula, tile cutter and nails). Fast and easy. Both for renovation or new work, Brick Slip is a fast and clean choice for cladding. Rojo Bilbao Brick Slip is the model within red range that does not present tonality variation. With high demand in the north of Spain, its klinker quality gives excellent perormance to harsh climates. Natural and permanent Colour. The beauty of the stoneware bricks produced by La Paloma Cerámica y Gres is permanent because it achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

This serie with chais is clean and stylish design with many choices of height and color. It contains of high and low children chairs, with or without armrest and mounting brackets and safety bar. Hang the chair with our fittings to facilitate cleaning. Frame in lacquered solid birch and seat and back in laminate.

This serie with chairs is clean and stylish design with many choices of height and color. It contains of high and low children chairs, with or without armrest and mounting brackets and safety bar. Hang the chair with our fittings to facilitate cleaning. Frame in lacquered solid birch and seat and back in laminate.

This serie with chairs is clean and stylish design with many choices of height and color. It contains of high and low children chairs, with or without armrest and mounting brackets and safety bar. Hang the chair with our fittings to facilitate cleaning. Frame in lacquered solid birch and seat and back in laminate.

This serie with chairs is clean and stylish design with many choices of height and color. It contains of high and low children chairs, with or without armrest and mounting brackets and safety bar. Hang the chair with our fittings to facilitate cleaning. Frame in lacquered solid birch and seat and back in laminate.

Only 23 mm: Unique ultra-slim profiles for thermal insulated windows Forster unico XS is a system addition that provides thermal insulated window elements and fixed glazing with ultra-slim facings. At the same time, it opens up a diversity of applications. This applies to the numerous opening variations as well as the possibility of installing fillings up to 60 mm to achieve very low U values and excellent sound insulation values. The unique profile design made of 100% steel is ideally suited for renovating old or historic buildings and for modern glass constructions.

Only 23 mm: Unique ultra-slim profiles for thermal insulated windows Forster unico XS is a system addition that provides thermal insulated window elements and fixed glazing with ultra-slim facings. At the same time, it opens up a diversity of applications. This applies to the numerous opening variations as well as the possibility of installing fillings up to 60 mm to achieve very low U values and excellent sound insulation values. The unique profile design made of 100% steel is ideally suited for renovating old or historic buildings and for modern glass constructions.

Only 23 mm: Unique ultra-slim profiles for thermal insulated windows Forster unico XS is a system addition that provides thermal insulated window elements and fixed glazing with ultra-slim facings. At the same time, it opens up a diversity of applications. This applies to the numerous opening variations as well as the possibility of installing fillings up to 60 mm to achieve very low U values and excellent sound insulation values. The unique profile design made of 100% steel is ideally suited for renovating old or historic buildings and for modern glass constructions. Forster unico Hi Forster unico Hi combines all the benefits of standard Forster unico systems with even higher insulation parameters. The system complies with the latest requirements for heat protection, e.g. EnEV 2009 (DE) and SIA 380/1 (CH). The structural profile depth allows the integration of 2- or 3-pane insulated glazing – for Uw values of up to 0.9 W/(m2.K). Simple construction: Only two additional components are needed to make Forster unico into a very efficient heat insulating Forster unico Hi element.

Only 23 mm: Unique ultra-slim profiles for thermal insulated windows Forster unico XS is a system addition that provides thermal insulated window elements and fixed glazing with ultra-slim facings. At the same time, it opens up a diversity of applications. This applies to the numerous opening variations as well as the possibility of installing fillings up to 60 mm to achieve very low U values and excellent sound insulation values. The unique profile design made of 100% steel is ideally suited for renovating old or historic buildings and for modern glass constructions. Forster unico Hi Forster unico Hi combines all the benefits of standard Forster unico systems with even higher insulation parameters. The system complies with the latest requirements for heat protection, e.g. EnEV 2009 (DE) and SIA 380/1 (CH). The structural profile depth allows the integration of 2- or 3-pane insulated glazing – for Uw values of up to 0.9 W/(m2.K). Simple construction: Only two additional components are needed to make Forster unico into a very efficient heat insulating Forster unico Hi element.

<p>Bison Trays integrate seamlessly with Bison Cubes and Deck Systems. Instead of installing a wood tile or paver, set a Bison Rock Tray in its place to add dimension and texture to deck areas. <em>Note: The digital images displayed have the most accurate color possible. However, due to differences in computer monitors, we cannot be responsible for variations in color between the actual product and your screen.</em></p> <p><strong>FEATURES</strong><br></p> <ul><li>Lightweight and exceptionally durable aluminum construction</li><li>Custom sizes available</li><li>Maintenance free</li><li>Typically contain 20% recycled content and are 100% recyclable</li><li>Finished with Low VOC powder-coat paints and sealants</li><li>Made in the USA.</li></ul> <p><br></p>

<p>Planter. Seating. Storage. With modular Bison Cubes, the choice is yours! Bison Cubes make it easy to design a comfortable and beautiful environment. Bison Cubes integrate seamlessly with Bison Deck Systems. Instead of installing a wood deck tile, set a Bison Cube in its place for use as a planter or add a Bison Ipê Cube Top for seating and storage. <em>Note: The digital images displayed have the most accurate color possible. However, due to differences in computer monitors, we cannot be responsible for variations in color between the actual product and your screen.</em><br></p> <ul><li>Commercial grade aluminum Cubes</li><li>Handcrafted of never-rust .090 marine-grade aluminum (3/32″ thick) </li><li>Custom sizes, materials, and colors available</li><li>Maintenance free</li><li>Typically contain 20% recycled content and are 100% recyclable</li><li>Finished with Low VOC powder-coat paints and sealants</li><li>Drain holes and irrigation sleeves included</li><li>Warranty: Limited 5 year warranty on cube structure and powder coated finishes available</li><li>Can contribute to LEED points</li><li>Made in the USA</li></ul>

[LIST] Fulfils all standard cleaning and hygienic properties for use in healthcare environments (compliant with HBN 00-10, TDM 4032:0.6 and HTM 60). Does not contribute to the growth of MRSA and ensures low particle emission (ISO Class 5). Highest fire safety (Class A1) and sound absorption (Class A) plus non-hygroscopic and dimensionally stable even at humidity levels of up to 100% RH. [/LIST]

[LIST] For demanding healthcare applications requiring cleaning with damp cloth using standard detergents and specialist steam and high pressure cleaning (compliant with HBN 00-10, TDM 4032:0.6 and HTM 60). Does not contribute to the growth of MRSA, low particle emission (ISO Class 4). Highest fire safety (Class A1) and sound absorption (Class A) plus non-hygroscopic and dimensionally stable even at humidity levels of up to 100% RH. [/LIST]

[LIST] Specifically designed for use in pressurised healthcare environments where differential air pressure is required to prevent infection spreading eg. surgeries, recovery rooms, intensive care, etc. (compliant with HBN 00-10, TDM 4032:0.6 and HTM 60). For use in operating theatres, seek client approval. Does not contribute to the growth of MRSA, low particle emission (ISO Class 3) and can be effectively disinfected with standard detergents and steam cleaning. Highest fire safety (Class A1), good sound absorption (Class B) plus non-hygroscopic and dimensionally stable even at humidity levels of up to 100% RH. [/LIST]

Ecophon Hygiene LabotecAir A is a wall to wall, sound-absorbing ceiling system intended for environments where there are demands on low particle emission, air pressure control and where occasional wet wiping and/or disinfection is required. Examples of applications: laboratories, the pharmaceutical and electronics industries and in healthcare premises. The system is classified B1, B5 and B10 for zone 4 according to standard NF S 90-351 and clean room classified according ISO 5. The system consists of Ecophon Hygiene LabotecAir A tiles, which have a core of high density glass wool and a painted particle-repellent Akutex™ HP surface. The back of the tile is covered with a airtight glass tissue. The edges are painted. The supporting structure is an exposed Connect T24 grid of galvanised steel. The weight of the system is 3-4 kg/m². The tiles should be secured to the grid with Connect Hygiene clips in order to withstand air pressure.

Kumin low single-lever washbasin mixer - incl. pop-up drain and side lift rod, - anti-scale aerator, - ceramic disc cartridge, - flow rate: 5 l/min, - integral anti-scale aerator: easy removal with no special tool (coin) and easier cleaning, - maximum 5 l/min for water savings and comfort of use - reduced spray, - water passes through tap body with no contact with chrome or nickel: hygiene, safety, savings.

Kumin low single-lever washbasin mixer - no drain, - anti-scale aerator, - ceramic disc cartridge, - flow rate: 5 l/min.

Deck-mounted electronic basin mixer : Independent IP65 electronic control unit. 230/12V mains supply with transformer. Flow rate pre-set at 3 lpm at 3 bar, can be adjusted 1.5 - 6 lpm. Scale-resistant flow straightener. Adjustable duty flush (pre-set flush ~60 sec. every 24hr after last use). Active, infrared presence detection, sensor at the end of the spout optimises detection. Chrome-plated brass body. PEX flexibles with filters and solenoid valves M3/8". Fixing reinforced by 2 stainless steel rods. Anti-blocking safety. Spout with smooth interior and low volume of water (reduces bacterial development). Side temperature control with adjustable maximum temperature limiter. 10-year warranty.

Deck-mounted mechanical basin mixer, without pop-up waste. Straight spout H. 85mm L. 120mm with hygienic flow straightener. Ø 40mm ceramic cartridge. Pre-set maximum temperature limiter. Body and spout with smooth interiors and low water volume. Flow rate limited to 5 lpm at 3 bar. Solid control lever. PEX flexibles F3/8" with filters and non-return valves. Reinforced fixing via 2 stainless steel rods. 10-year warranty.

Wall-mounted SECURITHERM pressure-balancing (EP) shower mixer: Anti-scalding safety: HW flow is reduced if CW supply fails. Securitouch thermal insulation to prevent burns. Ø 40mm pressure-balancing ceramic cartridge. Pre-set maximum temperature limiter. Body with smooth interior and low water volume. Flow rate regulated at 9 lpm. Chrome-plated brass body and low, sculptured lever. M1/2" shower outlet with integrated non-return valve. Offset M1/2" M3/4" STOP/PURGE connectors. 10-year warranty.

Deck-mounted SECURITHERM thermostatic sequential basin mixer without pop-up waste. Straight spout H. 85mm L. 120mm with hygienic flow straightener. Anti-scalding failsafe: shuts off immediately if cold water supply fails. Securitouch thermal insulation prevents burns. No non-return valves on the inlets. Scale-resistant thermostatic sequential cartridge for single control of flow rate and temperature. Cold water temperature adjustable up to 40°C with temperature limiter set at 40°C and thermal and chemical shocks are possible. Body and spout with smooth interiors and low water volume. Flow rate regulated at 7 lpm. No manual contact thanks to Hygiene control lever L. 146mm. PEX flexibles F3/8" with chrome-plated brass stopcocks. Reinforced fixing via 2 stainless steel rods. 10-year warranty.

Wall-mounted SECURITHERM thermostatic sequential with BIOCLIP removable spout. Supplied with 1 disposable spout made from recyclable Hostaform®, L. 185mm Ø 22mm. Anti-scalding failsafe: hot water shuts off immediately if cold water supply fails. Securitouch thermal insulation prevents burns. No non-return valves on the inlets. Scale-resistant thermostatic sequential cartridge for single control temperature and flow rate adjustment. Cold water temperature adjustable up to 40°C with temperature limiter set at 40°C. Thermal shocks are possible. Body and spout with smooth interiors and low water volume. Flow rate regulated at 7 lpm. Chrome-plated brass body. No manual contact thanks to Hygiene control lever L. 146mm. Mixer with 150mm centres supplied with offset M1/2" M3/4" STOP/PURGE connectors. 10-year warranty.

Wall-mounted SECURITHERM individual sequential thermostatic shower mixer: Single lever control mixer with no non-return valves. Anti-scalding failsafe: shuts off immediately if cold water supply fails. Securitouch thermal insulation prevents burns. Scale-resistant thermostatic sequential cartridge for single lever control of temperature and flow rate adjustment. Temperature control from cold water up to 39°C with maximum temperature limiter set at 39°C. Thermal shocks are possible. Body with smooth interior and low water volume. Flow rate regulated at 9 lpm. Chrome-plated brass body and Hygiene control lever L. 100mm. M1/2" bottom outlet. Offset M1/2" M3/4" STOP/PURGE connectors. 10-year warranty.

Interlocking concrete slabs for pedestrian lane and low traffic loads areas. (Lastre autobloccanti per zone pedonali e aree a traffico leggero).

Porous concrete paving system for low traffic loads areas.

The 45 cm 5-in-1 cooking module offers various possibility to cook your favorite dishes and try new recipes. This is a simple yet harmonious design that has been specially created to ensure you a unique cooking experience.<br>This module delivers 2.8 kW of total power.<br>It features 5 Cooking modes: steam, boiling, roasting, frying as well as low temperature.<br>It also includes 2 Induction grid and an interface with slide control.<br>Standar installation

The 45 cm 5-in-1 cooking module offers various possibility to cook your favorite dishes and try new recipes. This is a simple yet harmonious design that has been specially created to ensure you a unique cooking experience.<br>This module delivers 2.8 kW of total power.<br>It features 5 Cooking modes: steam, boiling, roasting, frying as well as low temperature.<br>It also includes 2 Induction grid and an interface with slide control.<br>Once installed, this induction hob is perfectly aligned with your worktop.

The KitchenAid 65 cm induction hob takes induction technology to the next level with smart functions, such as the pause button, bridge zone and griddle function.<br>Our hobs offer you absolute control: with the multifunction button, the special melting and simmering settings guarantee the precision you need to get perfect results from delicate ingredients like butter, chocolate and sauces, while the keep warm mode enables food to stay at a steady low heat while you serve, check on other dishes or entertain your guests.<br>This induction hob has a standard installation.

The versatile moving walk for longer distances Count on this moving walk to take you to places. Orinoco harmoniously blends into your building's architecture. Perfect for airports, exhibition halls, Metro hubs, indoors or out, wherever visions become reality.

Orinoco offers you the maximum in safety and technology for optimum ride comfort. Long or short distances. And you have plenty of choices – from stainless steel fairing to skirt band lighting. The Orinoco moving walk complements your building while maintaining its individual character. Advantages at a glance: [LIST] Maximum availability thanks to superior product quality and extensive experience Up to 1.600mm of usable width. Energy-saving technology cuts operating costs Smooth running and quiet, with an efficient drive Increased safety thanks to patented handrail inlet Space requirements balanced with transport capacity Long service life and low TCO Numerous individual design options [/LIST]

Ditec DAB205 is the top-of-the-range solution for swing-door applications. The slim and elegant design makes this product perfect for every environment. DAB205 is equipped with an extremely powerful gear motor that opens the door and assists during closing, supported by a spring; the performance is the highest in its market segment, with door weight up to 400 kg or door width of over 1.6 m. The advanced Control Unit makes it easy to adjust door setting and control kinematic performance. With Ditec DAB205, the user has a complete control of the door operations, with the ability to choose the operating mode that best meets their requirements, including PUSH&GO, Power Assist and Low Energy modes. Ditec DAB205 also provides advanced management of double swing doors, which make it the perfect choice in many high demanding environments such as hospitals, shopping malls and public transportation stations. A wide choice of accessories and control devices completes the product range. Ditec DAB205 fully complies with all European directives including EN 16005.

The versatile moving walk for longer distances Count on this moving walk to take you to places. Orinoco harmoniously blends into your building's architecture. Perfect for airports, exhibition halls, Metro hubs, indoors or out, wherever visions become reality.

Orinoco offers you the maximum in safety and technology for optimum ride comfort. Long or short distances. And you have plenty of choices – from stainless steel fairing to skirt band lighting. The Orinoco moving walk complements your building while maintaining its individual character. Advantages at a glance: [LIST] Maximum availability thanks to superior product quality and extensive experience Up to 1.600mm of usable width. Energy-saving technology cuts operating costs Smooth running and quiet, with an efficient drive Increased safety thanks to patented handrail inlet Space requirements balanced with transport capacity Long service life and low TCO Numerous individual design options [/LIST]

The Acrylicon Multi-Grip System is an industrial mono-colour system which can be elasticised for areas with high thermal and mechanical stresses and outdoor applications. The thickness of the system is 2-4mm. The system is suitable for car parks, walkways and ramps due to the integral slip resistance. Fibreglass arming can be installed within the system for added protection against movement cracking. Designed for use in outdoor and indoor areas where the temperature can vary. The elasticity and low temperature flexibility improves the performance in outdoor applications such as exterior parking decks, exterior walk ways (airports and vestibule walk off areas where salt is often used), safety marking zones and mezzanine metal gantries.

The Acrylicon Industry System is a trowel applied mortar system with an excellent compressive strength and tensile strength in bending. It is characterised by very low linear shrinkage, high wear resistance and unparalleled longevity. Due to Acrylicon’s unique ability to chemically bond it can be combined with other Acrylicon Systems to provide a decorative finish. The cure time is under 2 hours, even at temperatures down to -25°C, meaning any downtime is reduced to a minimum. Designed to withstand heavy duty mechanical stress, both indoor and outdoor. Suitable for use in offshore applications, heavy engineering, freezers and as a heavy duty screed (up to 550mm thickness) for other Acrylicon Systems.

The Acrylicon Lacquer System is a fully reactive, low viscosity resin based system that cures rapidly to produce a hard and abrasion resistant surface with good resistance to a variety of chemicals. Designed to be used as a sealer on concrete and masonry floors to prevent dusting, abrasion and scratching. It can further protect the substrate against ingress of oil, dirt and grease.

The Acrylicon Levelling Screed System is a solvent-free, 2 component methacrylic polymer mortar with high compressive and flexural strength. It is characterised by very low linear shrinkage and rapid curing, making it an ideal replacement for cementitious mortars and screeds. Acrylicon Levelling Screed can be applied in thicknesses of 5-550mm. The low shrinkage rate enables larger unevenness to be levelled out. The mortar surface resembles that of finished concrete. Designed as an underlayment screed for Acrylicon Systems, levelling up of uneven substrates, creating falls to drains, bedding in drains, ramps, rail bedding, casting bridge bearings and repairing concrete. Can be used internally or externally.

Lit central nozzle focuses the pulsed air onto hands at over 230km/h. High speed: dries in 10 -15 seconds. Choice of warm or cold air via a concealed switch. Infrared automatic activation. Intelligent technology: stops automatically when hands are removed. Anti-blocking: stops automatically if used continuously for more than 60 seconds. Vandal-resistant: cast aluminium. Easy to clean: one-piece cover. Dimensions: 180 x 230 x 250mm. Weight: 4kg. Airflow: 39 l/second. Air speed: 230 km/h. Low energy consumption: 900W. 220-240 V~/50Hz. Noise level: 75-80 dBA. Class I, IP22. CE marked. 3-year warranty.

Linear profile for outdoor applications, drive-over up to 5000 kg; recessed (ceiling, wall, ground); body in stainless steel, screen in PMMA; 24 SMD low power LEDs; RGB: SMD full colour LED; 3W - 24Vdc; RGB: 4,5W - 24Vdc; includes 1,5 m neoprene cable, H05RN-F 2x0,35/0,75 Ø6,3 mm; RGB: includes 1,5 m FEP+PCP cable (equivalent to H05RN-F cable), 4x0,50/0,50 Ø6,3 mm; total delivered lumens: 70 lm (2800K); diffuse optics; LED colour: white - 2600K, 2800K, 3700K; RGB; ingress protection: IP67; impact resistance: IK10; equipped with IPS; operating temperature: -20°C+45°C; screen temperature: max 40°C (Ta 25°C); photobiological safety: risk group 2 in accordance with EN62471:2006; appliance class: III; weight 0,70 kg/m; dimensions 260x20x43 mm; dimming using a 24Vdc dimmer; accessories: aluminium outer casing WC8110, outer casing for plasterboard WC8310, stainless steel outer casing WC8150, anti-fall kit WN8101

Linear profile for outdoor applications, drive-over up to 5000 kg; recessed (ceiling, wall, ground); body in stainless steel, screen in PMMA; 48 SMD low power LEDs; RGB: SMD full colour LED; 5W - 24Vdc; RGB: 4,5W - 24Vdc; includes 1,5 m neoprene cable, H05RN-F 2x0,35/0,75 Ø6,3 mm; RGB: includes 1,5 m FEP+PCP cable (equivalent to H05RN-F cable), 4x0,50/0,50 Ø6,3 mm; total delivered lumens: 145 lm (2800K); diffuse optics; LED colour: white - 2600K, 2800K, 3700K; RGB; ingress protection: IP67; impact resistance: IK10; equipped with IPS; operating temperature: -20°C+45°C; screen temperature: max 40°C (Ta 25°C); photobiological safety: risk group 2 in accordance with EN62471:2006; appliance class: III; weight 1,20 kg/m; dimensions 260x37x56 mm; dimming using a 24Vdc dimmer; accessories: aluminium outer casing WC8220, outer casing for plasterboard WC8420, stainless steel outer casing WC8250, anti-fall kit WN8102

Linear profile for outdoor and underwater applications; surface mounted (wall, ground); body in stainless steel, screen in PMMA; 48 SMD low power LEDs; RGB: SMD full colour LED; 6W - 24Vdc; RGB: 8,5W - 24Vdc; includes 5 m neoprene cable, H05RN-F 2x1,00 Ø6,8 mm; RGB: includes 5 m FEP+PCP cable (equivalent to H05RN-F cable), 4x0,50/0,50 Ø6,3 mm; total delivered lumens: 140 lm (2800K); R: 22 lm, G: 64 lm, B: 14 lm; diffuse optics; LED colour: white - 2600K, 2800K, 3700K; RGB; ingress protection: IP68; impact resistance: IK10; equipped with IPS; operating temperature: -20°C+45°C; screen temperature: max 40°C (Ta 25°C); photobiological safety: risk group 2 in accordance with EN62471:2006; appliance class: III; weight 0,70 kg/m; dimensions 510x20x58 mm; dimming using a 24Vdc dimmer; accessories: aluminium outer casing WC8551

Linear profile for outdoor and underwater applications; surface mounted (wall, ground); body in stainless steel, screen in PMMA; 96 SMD low power LEDs; RGB: SMD full colour LED; 10W - 24Vdc; 8,5W - 24Vdc; includes 5 m neoprene cable, H05RN-F 2x1,00 Ø6,8 mm; RGB: includes 5 m FEP+PCP cable (equivalent to H05RN-F cable), 4x0,50/0,50 Ø6,3 mm; total delivered lumens: 290 lm (2800K); R: 22 lm, G: 64 lm, B: 14 lm; diffuse optics; LED colour: white - 2600K, 2800K, 3700K; RGB; ingress protection: IP68; impact resistance: IK10; equipped with IPS; operating temperature: -20°C+45°C; screen temperature: max 40°C (Ta 25°C); photobiological safety: risk group 2 in accordance with EN62471:2006; appliance class: III; weight 1,20 kg/m; dimensions 510x37x61 mm; dimming using a 24Vdc dimmer; accessories: aluminium outer casing WC8651

Kitchen mixer with soft closing, dish washer valve and C-spout. Adjustable flow control and temperature limiter. Soft PEX flat end Ø10 mm. 4MS approved lead free brass. Energy class C. Chrome. RSK 8318391 LVI 6261186 732150.CA Constant flow 8 l/min. Soft PEX flat end Ø10 mm. Lead free. Energy class C. Chrome. RSK 8318392 732150.TT With Turbo-Jet function. Soft PEX flat end Ø10 mm. Lead free. Energy class B. Chrome. RSK 8318405 LVI 6261182 732151 Flow 9 l/min. Soft PEX® hoses with 3/8". Lead free. Chrome. RSK 8318390 NRF 4290241 732151.CA CA Constant flow 8 l/min. Soft PEX® hoses with 3/8". Lead free. Chrome. RSK 8318393 732151.TT With Turbo-Jet function. Soft PEX® hoses with 3/8". Lead free. Chrome. RSK 8318401 Mora MMIX combines elegance and ergonomic design with energy-efficiency. Soft geometric curves and a timeless style characterise the entire Mora MMIX range. The mixers were developed according to our unique EcoSafe™ concept focusing on low energy consumption and long-term environmental care.

Showerset with soap dish and Easy-Clean anti-limescale system. Shower hose in metal, 1750 mm. Chrome. RSK 8199188 NRF 4290621 LVI 6569709 VVS 737799304 Mora MMIX combines elegance and ergonomic design with energy-efficiency. Soft geometric curves and a timeless style characterise the entire Mora MMIX range. The mixers were developed according to our unique EcoSafe™ concept focusing on low energy consumption and long-term environmental care.

Basin mixer with soft-close mechanism and ECO flow. Soft PEX flat end Ø10 mm. 4MS approved lead free brass. Energy class B. Chrome. 733020.CA RSK 8344515 VVS 701988504 Mora MMIX combines elegance and ergonomic design with energy-efficiency. Soft geometric curves and a timeless style characterise the entire Mora MMIX range. The mixers were developed according to our unique EcoSafe™ concept focusing on low energy consumption and long-term environmental care.

Kitchen mixer with soft closing, dish washer valve and L-spout. Adjustable flow control and temperature limiter. Soft PEX flat end Ø10 mm. 4MS approved lead free brass. Chrome. RSK 8318385 732021 With Soft PEX® hoses with 3/8". Chrome. RSK 8318386 NRF 4290234 732020.TT With Turbo-Jet-function. Soft PEX flat end Ø10 mm. Chrome. RSK 8318400 LVI 6261179 Mora MMIX combines elegance and ergonomic design with energy-efficiency. Soft geometric curves and a timeless style characterise the entire Mora MMIX range. The mixers were developed according to our unique EcoSafe™ concept focusing on low energy consumption and long-term environmental care.

Basin mixer with push-down waste, soft-close mechanism and ECO flow. Soft PEX flat end Ø10 mm. 4MS approved lead free brass. Energy class B. Chrome. 733070.CA RSK 8344516 VVS 701995304 733071 With Soft PEX® hoses with 3/8". Chrome. RSK 8344514 NRF 4290051 733071.CA With Soft PEX® hoses with 3/8". Flow 9l/min. Chrome. Mora MMIX combines elegance and ergonomic design with energy-efficiency. Soft geometric curves and a timeless style characterise the entire Mora MMIX range. The mixers were developed according to our unique EcoSafe™ concept focusing on low energy consumption and long-term environmental care.

Kitchen mixer with soft closing, dish washer valve and U-spout. Adjustable flow control and temperature limiter. Soft PEX flat end Ø10 mm. 4MS approved lead free brass. Energy class C. Chrome. RSK 8318387 LVI 6261184 732070.TT With Turbo-Jet-function. Soft PEX flat end Ø10 mm. Chrome. RSK 8318388 LVI 6261180 732071 With Soft PEX® hoses with 3/8". Chrome. RSK 8318389 NRF 4290236 Mora MMIX combines elegance and ergonomic design with energy-efficiency. Soft geometric curves and a timeless style characterise the entire Mora MMIX range. The mixers were developed according to our unique EcoSafe™ concept focusing on low energy consumption and long-term environmental care.

Shower mixer 160 c/c with connection up, safety stop and Eco-function. 4MS approved lead free brass. Chrome. RSK 8344066 731050.0011 160 c/c. Chrome/black. RSK 8344067 731150 150 c/c. Chrome. RSK 8344073 NRF 4290268 LVI 6360637 VVS 722707104 731150.0011 150 c/c. Chrome/black. RSK 8344074 NRF 4290269 LVI 6360638 VVS 722707124 Mora MMIX combines elegance and ergonomic design with energy-efficiency. Soft geometric curves and a timeless style characterise the entire Mora MMIX range. The mixers were developed according to our unique EcoSafe™ concept focusing on low energy consumption and long-term environmental care.

Shower set with safety mixer, 160 c/c. Pressure balanced thermostatic mixer with safety stop at 38°C and Eco-function. 4MS approved lead free brass. Chrome. 731320.0011 RSK 8344037 731321.0011 150 c/c. Chrome. RSK 8344206 NRF 4290277 731321.0011DB 150 c/c. Incl. 2 x S-connectors. Chrome. Mora MMIX combines a softly shaped, ergonomic exterior with an energy-efficient interior. It has a geometric design with softly billowing curves, and the whole product line conveys a timeless, uniform style. Mora MMIX was developed according to our unique EcoSafe™ environmental concept for low energy consumption and long-term environmental care.

Basin mixer with care lever, soft closing function and ECO flow. Soft PEX flat end Ø10 mm. 4MS approved lead free brass. Energy class B. Chrome. 733010.CA RSK 8318152 VVS 701489404 733011 With Soft PEX® hoses with 3/8". Flow 9l/min. Chrome. RSK 8344532 NRF 4290046 733011.CA With Soft PEX® hoses with 3/8". Chrome. RSK 8318153 Mora MMIX combines elegance and ergonomic design with energy-efficiency. Soft geometric curves and a timeless style characterise the entire Mora MMIX range. The mixers were developed according to our unique EcoSafe™ concept focusing on low energy consumption and long-term environmental care.

Wall mounted kitchen mixer with spout outlet up. Eco and soft closing function. 160 c/c. 4MS approved brass. Chrome. RSK 8309029 753051 150 c/c. Chrome. RSK 8309030 NRF 4290197 LVI 6261205 VVS 727005604 753051.DB 150 c/c. Incl. s-connection (2x701001). Chrome. VVS 727005634 Mora MMIX combines elegance and ergonomic design with energy-efficiency. Soft geometric curves and a timeless style characterise the entire Mora MMIX range. The mixers were developed according to our unique EcoSafe™ concept focusing on low energy consumption and long-term environmental care.

Flushing mixer with Eco and soft closing function. 4MS approved brass. Chrome. RSK 8309810 Mora MMIX combines elegance and ergonomic design with energy-efficiency. Soft geometric curves and a timeless style characterise the entire Mora MMIX range. The mixers were developed according to our unique EcoSafe™ concept focusing on low energy consumption and long-term environmental care.

Kithen mixer with dish washer valve and flexible jet concentrator. Soft closing and Eco function. Soft PEX flat end Ø10 mm. 4MS approved lead free brass. Chrome. RSK 8318398 732168 Soft PEX® hoses with 3/8". Chrome. RSK 8318399 NRF 4290244 With dishwasher isolator Mora MMIX combines elegance and ergonomic design with energy-efficiency. Soft geometric curves and a timeless style characterise the entire Mora MMIX range. The mixers were developed according to our unique EcoSafe™ concept focusing on low energy consumption and long-term environmental care.

Kithen mixer with dish washer valve, soft closing and Eco function. Soft PEX flat end Ø10 mm. 4MS approved lead free brass. Chrome. RSK 8318403 With dishwasher isolator Mora MMIX combines elegance and ergonomic design with energy-efficiency. Soft geometric curves and a timeless style characterise the entire Mora MMIX range. The mixers were developed according to our unique EcoSafe™ concept focusing on low energy consumption and long-term environmental care.

Basin mixer with pop-up waste, soft closing and Eco function. Soft PEX® hoses with 3/8" connecting nut. 4MS approved lead free brass. Chrome. RSK 8318159 NRF 4290049 733061.CA Ecoflow 5l/min. Chrome. RSK 8318162 Mora MMIX combines elegance and ergonomic design with energy-efficiency. Soft geometric curves and a timeless style characterise the entire Mora MMIX range. The mixers were developed according to our unique EcoSafe™ concept focusing on low energy consumption and long-term environmental care.

Linear profile for outdoor and underwater applications; surface mounted (ceiling, wall, ground); AISI 316L stainless steel end caps, screen in polycarbonate; optics version: 6 power LEDs pitch 100 mm, diffuse version: 78 mid power LEDs, RGB version: 42 low power LED full-colour; optics version: 7W - 24Vdc, diffuse version: 10W - 24Vdc, RGB version: 11W - 24Vdc; includes 5 m neoprene cable H05RN-F 2x0,75 Ø6,3 mm, RGB: includes 5 m FEP+PCP cable (equivalent to H05RN-F cable) 4x0,50/0,50 Ø6,3 mm; total delivered lumens: optics version: 504 lm (3000K), diffuse version 522 lm (3000K); optics: 40°, 65°, 20°x50°, diffuse; LED colour: optics version: white - 2700K, 3000K, 4000K; diffuse version: white - 2700K, 3000K, 4000K, RGB; ingress protection: IP68; impact resistance: IK10; IPS built into the cable gland; operating temperature: -10°C +45°C; screen temperature: max 40°C (Ta 25°C); photobiological safety: risk group 1 in accordance with EN62471:2006; appliance class: III; weight 0,70 kg; dimensions ø25x613 mm; dimming using a 24Vdc dimmer; accessories: clips pair WM0501, pair of vandal-resistant clips WM0502

This low, lateral bench is understated in style, but strong in appeal. Like the other designs in the Paxa furniture suite, the bench’s simple design reveals the beauty of the materials used to construct it. Streamlined lengths of pine form the seat and backrest, resting in the smooth concrete panels supporting the bench on either side. The bench is perfectly suited to contemporary settings, both indoor and outside. Design: Blenda Design.

This low, lateral bench is understated in style, but strong in appeal. Like the other designs in the Paxa furniture suite, the bench’s simple design reveals the beauty of the materials used to construct it. Streamlined lengths of pine form the seat and backrest, resting in the smooth concrete panels supporting the bench on either side. The bench is perfectly suited to contemporary settings, both indoor and outside. Design: Blenda Design.

This low, lateral bench is understated in style, but strong in appeal. Like the other designs in the Paxa furniture suite, the bench’s simple design reveals the beauty of the materials used to construct it. Streamlined lengths of pine form the seat and backrest, resting in the smooth concrete panels supporting the bench on either side. The bench is perfectly suited to contemporary settings, both indoor and outside. Design: Blenda Design.

With its elegant contours and contemporary profile, Värtan is a striking bench characterised by clean lines and understated style. The seat and backrests are made from slats of oak that form a long, lateral line where they meet. The wooden parts are treated with Sioo-impregnation technology to protect them from moisture, insects and fungus, and the frame is crafted in durable powder-coated steel. Värtan is a versatile design that can be ordered in a range of lengths and variations, or custom-made to suit specific requirements. It is currently available with or without a backrest or armrests, or prepared for installation on top of a low wall or concrete plinth. Värtan is a perfect choice for shopping centres, transport hubs, departure lounges and any environment where public seating is required. Design: Nola.

With its elegant contours and contemporary profile, Värtan is a striking bench characterised by clean lines and understated style. The seat and backrests are made from slats of oak that form a long, lateral line where they meet. The wooden parts are treated with Sioo-impregnation technology to protect them from moisture, insects and fungus, and the frame is crafted in durable powder-coated steel. Värtan is a versatile design that can be ordered in a range of lengths and variations, or custom-made to suit specific requirements. It is currently available with or without a backrest or armrests, or prepared for installation on top of a low wall or concrete plinth. Värtan is a perfect choice for shopping centres, transport hubs, departure lounges and any environment where public seating is required. Design: Nola.

With its elegant contours and contemporary profile, Värtan is a striking bench characterised by clean lines and understated style. The seat and backrests are made from slats of oak that form a long, lateral line where they meet. The wooden parts are treated with Sioo-impregnation technology to protect them from moisture, insects and fungus, and the frame is crafted in durable powder-coated steel. Värtan is a versatile design that can be ordered in a range of lengths and variations, or custom-made to suit specific requirements. It is currently available with or without a backrest or armrests, or prepared for installation on top of a low wall or concrete plinth. Värtan is a perfect choice for shopping centres, transport hubs, departure lounges and any environment where public seating is required. Design: Nola.

With its elegant contours and contemporary profile, Värtan is a striking bench characterised by clean lines and understated style. The seat and backrests are made from slats of oak that form a long, lateral line where they meet. The wooden parts are treated with Sioo-impregnation technology to protect them from moisture, insects and fungus, and the frame is crafted in durable powder-coated steel. Värtan is a versatile design that can be ordered in a range of lengths and variations, or custom-made to suit specific requirements. It is currently available with or without a backrest or armrests, or prepared for installation on top of a low wall or concrete plinth. Värtan is a perfect choice for shopping centres, transport hubs, departure lounges and any environment where public seating is required. Design: Nola.

With its elegant contours and contemporary profile, Värtan is a striking bench characterised by clean lines and understated style. The seat and backrests are made from slats of oak that form a long, lateral line where they meet. The wooden parts are treated with Sioo-impregnation technology to protect them from moisture, insects and fungus, and the frame is crafted in durable powder-coated steel. Värtan is a versatile design that can be ordered in a range of lengths and variations, or custom-made to suit specific requirements. It is currently available with or without a backrest or armrests, or prepared for installation on top of a low wall or concrete plinth. Värtan is a perfect choice for shopping centres, transport hubs, departure lounges and any environment where public seating is required. Design: Nola.

With its elegant contours and contemporary profile, Värtan is a striking bench characterised by clean lines and understated style. The seat and backrests are made from slats of oak that form a long, lateral line where they meet. The wooden parts are treated with Sioo-impregnation technology to protect them from moisture, insects and fungus, and the frame is crafted in durable powder-coated steel. Värtan is a versatile design that can be ordered in a range of lengths and variations, or custom-made to suit specific requirements. It is currently available with or without a backrest or armrests, or prepared for installation on top of a low wall or concrete plinth. Värtan is a perfect choice for shopping centres, transport hubs, departure lounges and any environment where public seating is required. Design: Nola.

With its elegant contours and contemporary profile, Värtan is a striking bench characterised by clean lines and understated style. The seat and backrests are made from slats of oak that form a long, lateral line where they meet. The wooden parts are treated with Sioo-impregnation technology to protect them from moisture, insects and fungus, and the frame is crafted in durable powder-coated steel. Värtan is a versatile design that can be ordered in a range of lengths and variations, or custom-made to suit specific requirements. It is currently available with or without a backrest or armrests, or prepared for installation on top of a low wall or concrete plinth. Värtan is a perfect choice for shopping centres, transport hubs, departure lounges and any environment where public seating is required. Design: Nola.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

"The Magnetic.Access Pro-H model is part of the Magnetic.Access product range and is especially designed for access applications with a boom skirt. Magnetic.Access Pro-H models contain the same components as Magnetic.Access Pro-L barriers but the housing is adjusted in height and it comes with a MicroBoom (straight boom) instead of a VarioBoom. Optionally available are pluggable modules to extend the functionality of the barrier as well as comprehensive accessories. The Magnetic.Access range does not only offer long-life cycle, great reliability and quality but impresses with sophisticated and enduring design, extremely low operational costs, high ease of use and almost maintenance-free technology."

<p>The new <strong>MB-86</strong> window and door series have been designed to offer outstanding insulation properties. It meets the increasing requirements from the legislative and general market demands for the enhanced energy saving construction of new windows and doors. Offered in three varieties <strong>ST</strong>, <strong>SI </strong>and <strong>AERO</strong> it is the first aluminum system to employ silica aerogel, the nanoporous material that has a very high proportion of free void volume compared to conventional solid materials. Its high pore volume, low solid content, and torturous path amorphous structure give rise to low values of thermal conductivity. Therefore the system features the industry leading thermal performance. In addition it also features exceptional rate of profiles inertia that allows for greater windows in size and weight. <br></p> <p><strong>Features and benefits:</strong></p> <ul><li>large selection of profiles</li><li>newly shaped, extra thick thermal breaks</li><li>multi component central gasket</li><li>glazing strips with additional sealing option</li><li>glazing up to 67,5 mm enabling all types of two chamber glazing, acoustic and security, anti burglary glazing</li><li>large, wire-free glass areas</li><li>appropriate for variety of hardware including concealed hinges</li><li>water draining available in both traditional and concealed options</li><li>highly energy efficient from 0,57 W/m2K</li><li>clean, sharp lines of narrow extruded aluminum framing</li><li>multitude of finish options</li></ul> <p></p> <p><br></p>

ipasol – The ipasol product range lets in an above-average amount of natural light while at the same time ensuring an unusually low solar energy transmittance (solar factor). The performance of these highly selective coatings is at the limit of the physically possible. With low exterior reflectivity, glass façades that are transparent in both directions become possible, enabling the development of building concepts that are "filled with life" and are energy-efficient. Alternatively, highly reflective ipasol versions or coloured glazing can be used to create architectural highlights, allowing almost any design concept to be realized. Every Thermobel insulating glazing product is CE certified for use in buildings and follows AGC Glass Europe’s ‘green strategy’ of being Cradle-to-Cradle Certified TM Bronze. 'GigaLite': upon request and after feasbility study, AGC can supply IGU's with length of 16m.

Sunergy – Sunergy combines very low light reflection with a large range of colours. This range of solar control hard-coated glass (type A following EN 1096-1) guarantees a good comfort level by combining low E performance (low U value) and high solar control properties (low solar factor). It also offers architects and glass processors limitless creativity to use a single glass in several ways: single glass, double and triple glazed units, laminated, bent, toughened, enamelled, etc.). Thanks to its pyrolitic technology, this range delivers good light and energy performances and good thermal insulation and is very easy to process. Every Thermobel insulating glazing product is CE certified for use in buildings and follows AGC Glass Europe’s ‘green strategy’ of being Cradle-to-Cradle Certified TM Bronze.

Stopsol – Stopsol is a brand recognised for its stunning aesthetics due to its combination of brilliant coatings and extended range of coloured glass. This range of solar control hard-coated glass (type A following EN 1096) delivers good light and energy performances, ensuring the privacy and comfort of people inside the building and reducing air-conditioning costs due to its low solar factor. Every Thermobel insulating glazing product is CE certified for use in buildings and follows AGC Glass Europe’s ‘green strategy’ of being Cradle-to-Cradle Certified TM Bronze.

A chair in form-pressed wood veneer, as simple and self-evident in its expression as if it has always existed, and yet completely new and never seen before. Lucky is both closed and open, horizontal and vertical. Neat yet simultaneously substantial, and low enough to be pushed beneath a desk. Lucky is the archetypal chair, providing a correct sitting position and almost ritualistic in its exact forms. Traditional, straightforward materials such as stained, form-pressed oak plywood meet a leather or fabric-covered padded seat and back. Generously evident in all its simplicity, the monochrome colour scheme underlines a stringent and classical expression.

Dream/4 Shower head four functions with RGB LED Lights, low voltage transformer, Control keyboard for Cromotherapy and flexible water connection. False ceiling installation

Dream-Flat Shower heads with RGB LED Lights, low voltage transformer, control keyboard for Cromotherapy and flexible water connection. False ceiling installation

The Entrematic EM PSW250 swing door operator is one of the most powerful, safe and flexible door operators in the market. Slim design, silent operation, high performance and a wide range of accessories for convenience, safety and security makes the Entrematic EM PSW250 swing door operator the ideal choice for almost any application, for example in healthcare-, commercial- and public buildings. The Entrematic EM PSW250 delivers low noise during operation and it is the ideal choice for applications with high demands on gentle and smooth operation in combination with strength and high traffic flow. It compensates for stack pressure and wind load and yet remains easy to open manually also for less abled users. An optional embedded battery back-up and monitoring ensures operation even when the power is interrupted, while an intelligent locking function adds maximum possible security. Operator suitable for pull installation with fitting arm system.

The Entrematic EM PSW250 swing door operator is one of the most powerful, safe and flexible door operators in the market. Slim design, silent operation, high performance and a wide range of accessories for convenience, safety and security makes the Entrematic EM PSW250 swing door operator the ideal choice for almost any application, for example in healthcare-, commercial- and public buildings. The Entrematic EM PSW250 delivers low noise during operation and it is the ideal choice for applications with high demands on gentle and smooth operation in combination with strength and high traffic flow. It compensates for stack pressure and wind load and yet remains easy to open manually also for less abled users. An optional embedded battery back-up and monitoring ensures operation even when the power is interrupted, while an intelligent locking function adds maximum possible security. Operator suitable for push installation with fitting arm system.

The Entrematic EM PSW250 swing door operator is one of the most powerful, safe and flexible door operators in the market. Slim design, silent operation, high performance and a wide range of accessories for convenience, safety and security makes the Entrematic EM PSW250 swing door operator the ideal choice for almost any application, for example in healthcare-, commercial- and public buildings. The Entrematic EM PSW250 delivers low noise during operation and it is the ideal choice for applications with high demands on gentle and smooth operation in combination with strength and high traffic flow. It compensates for stack pressure and wind load and yet remains easy to open manually also for less abled users. An optional embedded battery back-up and monitoring ensures operation even when the power is interrupted, while an intelligent locking function adds maximum possible security. Operator suitable for push installation for double doors with fitting arm system.

The Entrematic EM PSW250 swing door operator is one of the most powerful, safe and flexible door operators in the market. Slim design, silent operation, high performance and a wide range of accessories for convenience, safety and security makes the Entrematic EM PSW250 swing door operator the ideal choice for almost any application, for example in healthcare-, commercial- and public buildings. The Entrematic EM PSW250 delivers low noise during operation and it is the ideal choice for applications with high demands on gentle and smooth operation in combination with strength and high traffic flow. It compensates for stack pressure and wind load and yet remains easy to open manually also for less abled users. An optional embedded battery back-up and monitoring ensures operation even when the power is interrupted, while an intelligent locking function adds maximum possible security. Operator suitable for pull installation for double doors with fitting arm system.

Part numbers: M17A y M17AB The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom. The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc. Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market  Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.  Adjustable power motor to regulate power consumption between 180 and 850 W.  HEPA filter media that filters solid particles in suspension.  Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.  Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.  Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.

Part numbers: M17AC & M17ACS The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom. The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc. Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market  Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.  Adjustable power motor to regulate power consumption between 180 and 850 W.  HEPA filter media that filters solid particles in suspension.  Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.  Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.  Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.

Complete toilet set: WC pan BTW dual outlet with bolt kit, Low cistern with dual push-button mechanism 4,5/3 litres, Fixed seat ASA compound material seat. Options: Low cistern with dual push-button mechanism 4,5/3 litres

Toilet pack for BTW close-coupled WC suite American standard. BTW WC pan dual outlet with fixing kit. Fixed seat. Waste elbow. Low cistern with dual push-button mechanism 6/4,1 litres.

Complete toilet set: WC pan dual outlet with bolt kit, Low cistern with dual push-button mechanism 6/3 litres, Fixed wooden seat. White. Options: Soft closing wooden seat. White, Fixed wooden seat. Walnut, Soft closing wooden seat. Walnut.

Complete toilet set: WC pan BTW compact with dual outlet and bolt kit, Low cistern with dual push-button mechanism 4,5/3 litres, Fixed seat. Options: Soft closing seat.

Complete toilet set: WC pan BTW dual outlet with bolt kit. Low cistern extend with dual push-button mechanism 4,5/3 litres. Fixed seat. Options: Soft closing seat, Pull-out seat.

Toilet pack for BTW close-coupled WC suite American standard: BTW WC pan dual outlet with fixing kit. Fixed seat. Waste elbow. Low cistern extend with dual push-button mechanism 6/4,1 litres.

Complete toilet set: BTW Clean Rim WC pan P-trap outlet and bolting kit. Low cistern pan with lid and dual push-button mechanism 4,5/3 litres. Side inlet. Fixed seat. Chromed hinges. Options: Low cistern pan with lid and dual push-button mechanism 4,5/3 litres. Bottom left inlet. Soft-closing system seat.

Complete toilet set: BTW WC pan P-trap outlet and bolting kit. Low cistern pan with lid and dual push-button mechanism 4,5/3 litres. Side inlet. Fixed seat. Chromed hinges. Options: Low cistern pan with lid and dual push-button mechanism 4,5/3 litres. Bottom left inlet. Soft-closing system seat.

Complete toilet set: WC pan dual outlet. Low cistern with dual push-button mechanism 6/3 litres. Bottom left inlet. Fixed seat. Chromed hinges. Options: Low cistern with dual push-button mechanism 6/3 litres. Side inlet. Soft closing seat.

Complete toilet set: WC pan BTW dual outlet. Low cistern with dual push-button mechanism 6/3 litres. Bottom left inlet. Fixed seat. Chromed hinges. Options: Low cistern with dual push-button mechanism 6/3 litres. Side inlet. Soft closing seat.

Complete toilet set: WC pan for low cistern, vertical outlet. Low cistern with simple push-button mechanism. Fixed polypropylene seat. Options: Low cistern with dual push-button mechanism 6/3 litres Soft closing seat Fixed seat.

Complete toilet set: WC pan for low cistern, horizontal outlet. Low cistern with simple push-button mechanism. Fixed polypropylene seat. Options: Low cistern with dual push-button mechanism 6/3 litres Soft closing seat Fixed seat.

Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched.

Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: [LIST] Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched. [/LIST]

Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: [LIST] Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched. [/LIST]

Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: [LIST] Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched. [/LIST]

Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: [LIST] Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched. [/LIST]

Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: [LIST] Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched. [/LIST]

The KS 430 offers modern design and excellent comfort combined with high-quality technology: · More light through large-scale glazings · Soft/lift as standard for easy operation · Available up to 5800 x 2800 mm · Narrow sliding frames and frameless side elements · Easy operation of sash up to 400 kg sash weight · Energy efficient and heating cost saving · No tripping hazard due to low threshold height · Attractive colours for individual design requests · Better stability due to glass fibre low threshold · Thoughened panes protect from injuries when glass breakages · Can be perfectly combined with all other Internorm window systems

The KS 430 offers modern design and excellent comfort combined with high-quality technology: · More light through large-scale glazings · Soft/lift as standard for easy operation · Available up to 5800 x 2800 mm · Narrow sliding frames and frameless side elements · Easy operation of sash up to 400 kg sash weight · Energy efficient and heating cost saving · No tripping hazard due to low threshold height · Attractive colours for individual design requests · Better stability due to glass fibre low threshold · Thoughened panes protect from injuries when glass breakages · Can be perfectly combined with all other Internorm window systems

The HS 330 offers unique design and exceptional comfort, combined with high-quality technology: · More light through large-scale glazings · Available up 580 0 x 2800 mm · Narrow sliding frame and frameless side elements · Easy lifting and sliding of sash up to 400 kg sash weight · Energy efficient and heating cost saving · Low heat emission due to triple glazing · No tripping hazard due to low threshold height · Attractive colours for individual design requests · Better stability due to glass fibre low threshold · Thoughened panes protect from injuries when glass breakages · Can be perfectly combined with all other Internorm window systems

The HS 330 offers unique design and exceptional comfort, combined with high-quality technology: · More light through large-scale glazings · Available up 580 0 x 2800 mm · Narrow sliding frame and frameless side elements · Easy lifting and sliding of sash up to 400 kg sash weight · Energy efficient and heating cost saving · Low heat emission due to triple glazing · No tripping hazard due to low threshold height · Attractive colours for individual design requests · Better stability due to glass fibre low threshold · Thoughened panes protect from injuries when glass breakages · Can be perfectly combined with all other Internorm window systems

Well-known as a top-class solar glazing, Stopray, AGC’s range of soft coatings (type C following EN 1096-1), allows the highest level of natural light into a building but no heat. As a result, it delivers high solar protection while being transparent and maintaining a neutral colour. Always used as double or triple glazing, it is suitable for use in all climates as it controls heat entering in the summer and keeps heat from escaping during the winter. Since Stopray is also available in temperable versions (Stopray T range), this brand offers architects more design freedom and flexibility in their projects. •Delivers the highest level of selectivity (1.89) -- ratio between light transmission (72%) and solar protection (38%). •Lowers air-conditioning and heating costs, while offering the highest level of natural lighting. •Available in a large range of neutral colours, light transmission and solar protections levels •Offers very low thermal insulation (Ug value 1.0 W/m²)

The ipasol product range lets in an above-average amount of natural light while at the same time ensuring an unusually low solar energy transmittance (solar factor). The performance of these highly selective coatings is at the limit of the physically possible. With low exterior reflectivity, glass façades that are transparent in both directions become possible, enabling the development of building concepts that are "filled with life" and are energy-efficient. Alternatively, highly reflective ipasol versions or coloured glazing can be used to create architectural highlights, allowing almost any design concept to be realized. In the ipasol range the coated solar control glass pane is generally 6 mm thick unless physical constraints require thicker glass. Using a thinner inner pane prevents the visual distortions associated with the insulating glass effect (bending). ipasol solar control coatings can be applied both to jumbo-sized and cut-sized panes. Cut sizes of laminated safety glass, fully tempered glass or thermally toughened glass can be produced with highly individual designs, such as screen printing, digital printing, edge working, drilling or cut-outs.

Applauded for its superb appearance and visual comfort, Sunergy combines very low light reflection with a large range of colours. This range of solar control hard-coated glass (type A following EN 1096-1) guarantees a good comfort level by combining low E performance (low U value) and high solar control properties (low solar factor). It also offers architects and glass processors limitless creativity to use a single glass in several ways: single glass, double and triple glazed units, laminated, bent, toughened, enamelled, etc.). Thanks to its pyrolitic technology, this range delivers good light and energy performances and good thermal insulation and is very easy to process. •Infinite shelf life •Thanks to the low E characteristics, it has a U value 1,8 W/sqmK, and can be combined with a second low E glass to reduce the U value even more •Lowers air-conditioning costs thanks to its low solar factor

As the most famous coated glass in the world, Stopsol is a brand recognised for its stunning aesthetics due to its combination of brilliant coatings and extended range of coloured glass. This range of solar control hard-coated glass (type A following EN 1096) delivers good light and energy performances, ensuring the privacy and comfort of people inside the building and reducing air-conditioning costs due to its low solar factor. Moreover, this product can be used in a number of different ways: as monolithic glass (tempered or not tempered), as laminated glass or bent glass, as double or triple glazing, resulting in the highest level of freedom in processing and design. •Guarantees a high level of privacy thanks to its reflective coating. •Infinite shelf-life allows for long-term storage. •Limitless creativity for architects: one type of glass for all applications. •A far-reaching range of different and beautiful aesthetics thanks to a combination of three different reflective coatings with a large range of coloured glass.

Well-known as a top-class solar glazing, Stopray, AGC’s range of soft coatings (type C following EN 1096-1), allows the highest level of natural light into a building but no heat. As a result, it delivers high solar protection while being transparent and maintaining a neutral colour. Always used as double or triple glazing, it is suitable for use in all climates as it controls heat entering in the summer and keeps heat from escaping during the winter. Since Stopray is also available in temperable versions (Stopray T range), this brand offers architects more design freedom and flexibility in their projects. •Delivers the highest level of selectivity (1.89) -- ratio between light transmission (72%) and solar protection (38%). •Lowers air-conditioning and heating costs, while offering the highest level of natural lighting. •Available in a large range of neutral colours, light transmission and solar protections levels •Offers very low thermal insulation (Ug value 1.0 W/m²)

The ipasol product range lets in an above-average amount of natural light while at the same time ensuring an unusually low solar energy transmittance (solar factor). The performance of these highly selective coatings is at the limit of the physically possible. With low exterior reflectivity, glass façades that are transparent in both directions become possible, enabling the development of building concepts that are "filled with life" and are energy-efficient. Alternatively, highly reflective ipasol versions or coloured glazing can be used to create architectural highlights, allowing almost any design concept to be realized. In the ipasol range the coated solar control glass pane is generally 6 mm thick unless physical constraints require thicker glass. Using a thinner inner pane prevents the visual distortions associated with the insulating glass effect (bending). ipasol solar control coatings can be applied both to jumbo-sized and cut-sized panes. Cut sizes of laminated safety glass, fully tempered glass or thermally toughened glass can be produced with highly individual designs, such as screen printing, digital printing, edge working, drilling or cut-outs.

Applauded for its superb appearance and visual comfort, Sunergy combines very low light reflection with a large range of colours. This range of solar control hard-coated glass (type A following EN 1096-1) guarantees a good comfort level by combining low E performance (low U value) and high solar control properties (low solar factor). It also offers architects and glass processors limitless creativity to use a single glass in several ways: single glass, double and triple glazed units, laminated, bent, toughened, enamelled, etc.). Thanks to its pyrolitic technology, this range delivers good light and energy performances and good thermal insulation and is very easy to process. •Infinite shelf life •Thanks to the low E characteristics, it has a U value 1,8 W/sqmK, and can be combined with a second low E glass to reduce the U value even more •Lowers air-conditioning costs thanks to its low solar factor

As the most famous coated glass in the world, Stopsol is a brand recognised for its stunning aesthetics due to its combination of brilliant coatings and extended range of coloured glass. This range of solar control hard-coated glass (type A following EN 1096) delivers good light and energy performances, ensuring the privacy and comfort of people inside the building and reducing air-conditioning costs due to its low solar factor. Moreover, this product can be used in a number of different ways: as monolithic glass (tempered or not tempered), as laminated glass or bent glass, as double or triple glazing, resulting in the highest level of freedom in processing and design. •Guarantees a high level of privacy thanks to its reflective coating. •Infinite shelf-life allows for long-term storage. •Limitless creativity for architects: one type of glass for all applications. •A far-reaching range of different and beautiful aesthetics thanks to a combination of three different reflective coatings with a large range of coloured glass.

The "RUBCHUTE" standard section attaches perfectly to top and side hoppers and to all other chute accessories. The "RUBCHUTE" standard section is the main and major component of all "RUBCHUTE" rubble chute columns. RUBI-KANGURO "RUBCHUTE" rubber rubble chutes are without doubt the most economical and safest way to move rubble and other site waste from higher floors to containers at street level. The resistance and ease of use of RUBI-KANGURO "RUBCHUTE" rubber rubble chutes means that they are recommended for use in any construction work over several floors. Because of their capacity for noise absorption and dust reduction and containment, "RUBCHUTE" rubber rubble chutes are particularly suitable for use in urban environments, such as: hospitals, historical buildings, etc. Owing to the ribbing inside RUBI-KANGURO rubble chutes, friction with the rubble is minimised and wear of the chute cone is reduced, thus extending the product’s lifespan. RUBI-KANGURO "RUBCHUTE" rubber rubble chutes have in-built nylon fibres, which gives them greater strength and durability. The chains of all "RUBCHUTE” rubble chute models are extra-reinforced, with 7 mm diameter links, and they comply with the DIN 763 standard. Because they are stackable, users save space in storage and they are easy to transport. All RUBI-KANGURO rubber products stand out for their excellent performance in low temperatures, remaining unchanged up to - 60 ° C and for being made of 100% recyclable materials. At RUBI we have always had a very close relationship with construction professionals and it is vital for us to have constant, fluent communication with them. That's why we have all the necessary tools to offer industry professionals an innovative product able to provide solutions to their daily needs while working.

Ytong’s AAC “Planbauplatten” are suitable for solid and light partition walls with low dead weigth. The boards are used for the reconstruction sector as well as for furnishing and form design of interiors. Benefits: • multifunctional • homogeneous basis for plastering • low dead weight • very good fire protection classification: F90-A from 7.5 cm • processable with Ytong’s thin-bed coating

Ytong’s AAC “Planbauplatten” are suitable for solid and light partition walls with low dead weigth. The boards are used for the reconstruction sector as well as for furnishing and form design of interiors. Benefits: • multifunctional • homogeneous basis for plastering • low dead weight • very good fire protection classification: F90-A from 7.5 cm • processable with Ytong’s thin-bed coating

Double-shell brickwork – at the inside with Ytong and at the outside with Silka: If the matter is an outer shell with heavy-duty weatherproofing, you traditionally stick to a well approved double-shell brickwork. The outer shell – the Silka faced brickwork – meets structural-physical demands as well as high mechanical requirements. Due to the facade’s persistence and low amount of maintenance, those double-shell brickworks pay off fine in the long run. Between the bearing inner Ytong-shell and the weather-resistant outer Silka-shell, there’s room for additional functional layers.

The "RUBCHUTE" chute with side hopper is ideal for unloading building rubble at an intermediate section of the chute column. The use of "RUBCHUTE" rubber chutes with side hopper is especially suitable for unloading rubble from windows and balconies. RUBI-KANGURO "RUBCHUTE" rubber rubble chutes are without doubt the most economical and safest way to move rubble and other site waste from higher floors to containers at street level.  The resistance and ease of use of RUBI-KANGURO "RUBCHUTE" rubber rubble chutes means that they are recommended for use in any construction work over several floors.  Because of their capacity for noise absorption and dust reduction and containment, "RUBCHUTE" rubber rubble chutes are particularly suitable for use in urban environments, such as: hospitals, historical buildings, etc. Owing to the ribbing inside RUBI-KANGURO rubble chutes, friction with the rubble is minimised and wear of the chute cone is reduced, thus extending the product’s lifespan. RUBI-KANGURO "RUBCHUTE" rubber rubble chutes have in-built nylon fibres, which gives them greater strength and durability. The chains of all "RUBCHUTE” rubble chute models are extra-reinforced, with 7 mm diameter links, and they comply with the DIN 763 standard.  Because they are stackable, users save space in storage and they are easy to transport. All RUBI-KANGURO rubber products stand out for their excellent performance in low temperatures, remaining unchanged up to - 60 ° C and for being made of 100% recyclable materials.  RUBI is now present in over 120 countries, thanks to our network of sales offices, subsidiaries and authorized dealers. For this reason we make it easy for users around the world to find our tools and spare parts.

First segment of the “RUBCHUTE” rubber rubble chute with metal top hopper.  Designed for loading waste from a wheelbarrow or shovel. RUBI-KANGURO "RUBCHUTE" rubber rubble chutes are without doubt the most economical and safest way to move rubble and other site waste from higher floors to containers at street level.  The resistance and ease of use of RUBI-KANGURO "RUBCHUTE" rubber rubble chutes means that they are recommended for use in any construction work over several floors.  Because of their capacity for noise absorption and dust reduction and containment, "RUBCHUTE" rubber rubble chutes are particularly suitable for use in urban environments, such as: hospitals, historical buildings, etc. Owing to the ribbing inside RUBI-KANGURO rubble chutes, friction with the rubble is minimised and wear of the chute cone is reduced, thus extending the product’s lifespan. RUBI-KANGURO "RUBCHUTE" rubber rubble chutes have in-built nylon fibres, which gives them greater strength and durability. The chains of all "RUBCHUTE” rubble chute models are extra-reinforced, with 7 mm diameter links, and they comply with the DIN 763 standard.  Because they are stackable, users save space in storage and they are easy to transport. All RUBI-KANGURO rubber products stand out for their excellent performance in low temperatures, remaining unchanged up to - 60 ° C and for being made of 100% recyclable materials.  Thanks to the work and cooperation of all the departments at the company and the great loyalty of our customers, scattered all around the world, we are aware of demands and specific needs of each market. For these reasons, we design and manufacture products and tools that are tailored to each type of market and that meet the needs of the professional.

Rubber urban planning item. Ideal for delimiting walkways, pavements, garden areas, etc. [LIST] Prevents the entry of vehicles into forbidden or delimited areas Great flexibility Prevents damage to vehicles and injury to people After an impact it returns to its original position Maximum strength and durability. Does not deform or break easily Measurements: 1000 mm in height x 100 mm in diameter With 30 mm wide reflective band for better visibility in low light conditions Colour: Black [/LIST]

Lacobel is clear float glass covered on one side by high-quality paint. Available in 20 trendsetting colours, the Lacobel glossy painted glass range features an attractive palette of contemporary colours. The range is divided into three lines: The Classics (3 timeless colours), The Trendies (11 fashionable colours) and The Exclusives (6 unique AGC colours). MyColour by Lacobel, AGC’s colour-on-demand service, is available for orders of at least 200 m2 per colour (contact your AGC representative for more information). The glossy look of Lacobel combines seamlessly with its matt alter ego Matelac. In the Lacobel and Matelac 2020 range, 14 colours are common to both finishes – enabling designers to play with combinations shade by shade. Lacobel is also available in SAFE and SAFE+ versions (EN12600), as well as an AntiBacterial glassTM version. Advantages: •Durable material: walls, sliding doors and furniture will retain their original appearance for years. •Cradle to Cradle Certified •AGC’s manufacturing process guarantees a uniform and glossy appearance, ensuring that the high-quality paint, industrially applied to the back of the glass, adheres flawlessly. •Can be provided with SAFE/SAFE+ film, delivering additional safety in case of glass breakage. •All Lacobel paints are environmentally friendly: they preserve indoor air quality by emitting very low levels of volatile organic compounds (VOCs) and formaldehyde. •Available in 20 standard colours. Other colours can be ordered via MyColour by Lacobel*, our colour-on-demand service (at least 200 m2 per colour). *This option is not available for transparent and metallic colours.

Matelac is clear glass covered on one side by high-quality paint and acid-etched on the other side. Available in 20 trendsetting colours, the Matelac matt painted glass range is divided into three lines: The Classics (3 timeless colours), The Trendies (11 fashionable colours) and The Exclusives (6 unique AGC colours). MyColour by Matelac, AGC’s colour-on-demand service, is available for orders of at least 200 m2 per colour (contact your AGC representative for more information).The matt look of Matelac combines seamlessly with its glossy alter ego Lacobel. In the Lacobel and Matelac 2020 range, 14 colours are common to both finishes – enabling designers to play with combinations shade by shade.Matelac is also available in SAFE+ versions (EN12600). Advantages: •Durable material: walls, sliding doors and furniture will retain their original appearance for years. •Cradle to Cradle Certified •AGC’s manufacturing process guarantees a uniform and matt appearance, ensuring that the high-quality paint, industrially applied to the back of the glass, adheres flawlessly. •Can be provided with SAFE+ film, delivering additional safety in case of glass breakage. •All Matelac paints are environmentally friendly: they preserve indoor air quality by emitting very low levels of volatile organic compounds (VOCs) and formaldehyde. •Available in 20 standard colours. MyColour by Matelac, our colour-on-demand service, is available for orders of at least 200 m2 per colour*. * This option is not available for transparent and metallic colours.

Matelac is clear glass covered on one side by high-quality paint and acid-etched on the other side. Available in 20 trendsetting colours, the Matelac matt painted glass range is divided into three lines: The Classics (3 timeless colours), The Trendies (11 fashionable colours) and The Exclusives (6 unique AGC colours). MyColour by Matelac, AGC’s colour-on-demand service, is available for orders of at least 200 m2 per colour (contact your AGC representative for more information).The matt look of Matelac combines seamlessly with its glossy alter ego Lacobel. In the Lacobel and Matelac 2020 range, 14 colours are common to both finishes – enabling designers to play with combinations shade by shade.Matelac is also available in SAFE+ versions (EN12600). Advantages: •Durable material: walls, sliding doors and furniture will retain their original appearance for years. •Cradle to Cradle Certified •AGC’s manufacturing process guarantees a uniform and matt appearance, ensuring that the high-quality paint, industrially applied to the back of the glass, adheres flawlessly. •Can be provided with SAFE+ film, delivering additional safety in case of glass breakage. •All Matelac paints are environmentally friendly: they preserve indoor air quality by emitting very low levels of volatile organic compounds (VOCs) and formaldehyde. •Available in 20 standard colours. MyColour by Matelac, our colour-on-demand service, is available for orders of at least 200 m2 per colour*. * This option is not available for transparent and metallic colours.

Lacobel is clear float glass covered on one side by high-quality paint. Available in 20 trendsetting colours, the Lacobel glossy painted glass range features an attractive palette of contemporary colours. The range is divided into three lines: The Classics (3 timeless colours), The Trendies (11 fashionable colours) and The Exclusives (6 unique AGC colours). MyColour by Lacobel, AGC’s colour-on-demand service, is available for orders of at least 200 m2 per colour (contact your AGC representative for more information). The glossy look of Lacobel combines seamlessly with its matt alter ego Matelac. In the Lacobel and Matelac 2020 range, 14 colours are common to both finishes – enabling designers to play with combinations shade by shade. Lacobel is also available in SAFE and SAFE+ versions (EN12600), as well as an AntiBacterial glassTM version. Advantages: •Durable material: walls, sliding doors and furniture will retain their original appearance for years. •Cradle to Cradle Certified •AGC’s manufacturing process guarantees a uniform and glossy appearance, ensuring that the high-quality paint, industrially applied to the back of the glass, adheres flawlessly. •Can be provided with SAFE/SAFE+ film, delivering additional safety in case of glass breakage. •All Lacobel paints are environmentally friendly: they preserve indoor air quality by emitting very low levels of volatile organic compounds (VOCs) and formaldehyde. •Available in 20 standard colours. Other colours can be ordered via MyColour by Lacobel*, our colour-on-demand service (at least 200 m2 per colour). *This option is not available for transparent and metallic colours.

Matelac is clear glass covered on one side by high-quality paint and acid-etched on the other side. Available in 20 trendsetting colours, the Matelac matt painted glass range is divided into three lines: The Classics (3 timeless colours), The Trendies (11 fashionable colours) and The Exclusives (6 unique AGC colours). MyColour by Matelac, AGC’s colour-on-demand service, is available for orders of at least 200 m2 per colour (contact your AGC representative for more information).The matt look of Matelac combines seamlessly with its glossy alter ego Lacobel. In the Lacobel and Matelac 2020 range, 14 colours are common to both finishes – enabling designers to play with combinations shade by shade.Matelac is also available in SAFE+ versions (EN12600). Advantages: •Durable material: walls, sliding doors and furniture will retain their original appearance for years. •Cradle to Cradle Certified •AGC’s manufacturing process guarantees a uniform and matt appearance, ensuring that the high-quality paint, industrially applied to the back of the glass, adheres flawlessly. •Can be provided with SAFE+ film, delivering additional safety in case of glass breakage. •All Matelac paints are environmentally friendly: they preserve indoor air quality by emitting very low levels of volatile organic compounds (VOCs) and formaldehyde. •Available in 20 standard colours. MyColour by Matelac, our colour-on-demand service, is available for orders of at least 200 m2 per colour*. * This option is not available for transparent and metallic colours.

Lacobel is clear float glass covered on one side by high-quality paint. Available in 20 trendsetting colours, the Lacobel glossy painted glass range features an attractive palette of contemporary colours. The range is divided into three lines: The Classics (3 timeless colours), The Trendies (11 fashionable colours) and The Exclusives (6 unique AGC colours). MyColour by Lacobel, AGC’s colour-on-demand service, is available for orders of at least 200 m2 per colour (contact your AGC representative for more information). The glossy look of Lacobel combines seamlessly with its matt alter ego Matelac. In the Lacobel and Matelac 2020 range, 14 colours are common to both finishes – enabling designers to play with combinations shade by shade. Lacobel is also available in SAFE and SAFE+ versions (EN12600), as well as an AntiBacterial glassTM version. Advantages: •Durable material: walls, sliding doors and furniture will retain their original appearance for years. •Cradle to Cradle Certified •AGC’s manufacturing process guarantees a uniform and glossy appearance, ensuring that the high-quality paint, industrially applied to the back of the glass, adheres flawlessly. •Can be provided with SAFE/SAFE+ film, delivering additional safety in case of glass breakage. •All Lacobel paints are environmentally friendly: they preserve indoor air quality by emitting very low levels of volatile organic compounds (VOCs) and formaldehyde. •Available in 20 standard colours. Other colours can be ordered via MyColour by Lacobel*, our colour-on-demand service (at least 200 m2 per colour). *This option is not available for transparent and metallic colours.

Rising to the demand for advances in resistance, processing and performance, this new generation of ecological mirrors stands out for its copper-free metal coating, the use of low-level lead paints and its high resistance to corrosion. •Easy to clean and highly resistant to harsh cleaning products. •Available in a SAFE/SAFE+ version: this is a safety film applied to the back of the glass (uniform) which ensures safety (comply with EN12600) •MNGE mirrors are Cradle to Cradle Certified •Preserves indoor air quality by emitting very low levels of Volatile Organic Compounds (VOCs) and formaldehyde •Can resist up to 80°C (for uniform heated volumes)

Rising to the demand for advances in resistance, processing and performance, this new generation of ecological mirrors stands out for its copper-free metal coating, the use of low-level lead paints and its high resistance to corrosion. •Easy to clean and highly resistant to harsh cleaning products. •Available in a SAFE/SAFE+ version: this is a safety film applied to the back of the glass (uniform) which ensures safety (comply with EN12600) •MNGE mirrors are Cradle to Cradle Certified •Preserves indoor air quality by emitting very low levels of Volatile Organic Compounds (VOCs) and formaldehyde •Can resist up to 80°C (for uniform heated volumes)

The ideal option for simply and effectively complying with the regulations on energy efficiency and noise pollution. The system includes an insulation board in EPS with graphite of low dynamic stiffness, featuring a special grooved pattern, designed to give the optimal balance between thermal and acoustic insulation properties combined with maximum ease of installation.

The Ytong Verbundstein is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class P2 is ideal for walls that are optimized for thermal insulation. The quality class P4 is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.11 W/(mK) - Homogeneous, isotropic - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Thermoblock (plus) is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.08 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Verbundstein is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class P2 is ideal for walls that are optimized for thermal insulation. The quality class P4 is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.11 W/(mK) - Homogeneous, isotropic - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Verbundstein is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class P2 is ideal for walls that are optimized for thermal insulation. The quality class P4 is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.11 W/(mK) - Homogeneous, isotropic - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Thermoblock (plus) is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.08 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Thermoblock (plus) is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.08 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Verbundstein is suitable for all non-bearing, bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class P2 is ideal for walls that are optimized for thermal insulation. The quality class P4 is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.11 W/(mK) - Homogeneous, isotropic - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Silka block is suitable for load-bearing and non-load-bearing interior walls as well as for the inner shell of external walls. Thanks to the equipment with a reciprocating groove and spring system, processing is quick and easy. Grip pockets ensure ergonomic work. The processing is carried out with the Silka thin bed mortar. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - maximum sound insulation at high bulk densities - optimal summer warmth protection - optimized grips - also available as a perforated brick with a low bulk density

The Silka block is suitable for load-bearing and non-load-bearing interior walls as well as for the inner shell of external walls. Thanks to the equipment with a reciprocating groove and spring system, processing is quick and easy. Grip pockets ensure ergonomic work. The processing is carried out with the Ytong thin bed mortar. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - maximum sound insulation at high bulk densities - optimal summer warmth protection - optimized grips - also available as a perforated brick with a low bulk density

Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CD896 is a very compact speaker enclosure loaded with one 2-way coaxial transducer plus a second dedicated low-frequency transducer. The coaxial transducer is composed of an 8” (203 mm) LF driver and a 90° x 60° HF horn with 1.7” (43 mm) diaphragm compression driver. The second LF transducer is another 8” driver. Advanced engineering and construction of the complete speaker achieves a space-efficient design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The two 8” LF drivers work together to achieve an increase in overall output and improved mid-bass impact. The coaxial transducer can be rotated in 45° increments to tailor high-frequency coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The LF/HF transducer in the Vector CD896 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 1.7 inch (43 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single neodymium magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, and the use of a single neodymium magnet reduces the speaker’s weight, size, and cost. Dual Low-Frequency Drivers The Vector CD896 employs two mutually-coupled 8” LF transducers to achieve its high efficiency and impactful performance in a relatively small enclosure. Avia™ Digital Signal Processing Every aspect of the Vector CD896 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Versatile Installation The Vector CD896 is particularly effective in applications where compact dimensions and targeted pattern control are desirable. Such applications include front fill, delay fill, under-balcony, small front of house, and foreground music, especially when mated with a subwoofer. Its clean appearance facilitates acceptance by architects and interior designers, and its 25° beveled rear corners allow it to be mounted close to walls or ceilings without obstructing sight lines. Concealed M6 mounting points are included to accommodate either an optional yoke bracket or forged shoulder eyebolts (each sold separately).

Loudspeaker – Dual 12” Bi-Amplified 3-Way Coaxial 60° x 45° Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CD1265 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer plus a second dedicated low-frequency transducer. The coaxial transducer is composed of a 12” (305 mm) LF driver and a 60° x 45° HF horn with 3” (76 mm) diaphragm compression driver. The second LF transducer is a 12” driver with enhanced low-frequency performance. Advanced engineering and construction of the complete speaker achieves a space-efficient design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The two 12” LF drivers work together in a bi-amplified configuration to achieve an increase in overall output and improved low-frequency pattern control. The coaxial transducer can be rotated in 45° increments to tailor high-frequency coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The LF/HF transducer in the Vector CD1265 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single neodymium magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, and the use of a single neodymium magnet reduces the speaker’s weight, size, and cost. Dual Low-Frequency Drivers The Vector CD1265 employs an innovative and unconventional bi-amplified 3-way configuration using dual 12” LF transducers. Relative to the coaxial transducer, the dedicated LF transducer features increased excursion capability below 100 Hz. The frequency range of both drivers overlaps at precise levels to achieve a flat summed response, producing a higher overall output level compared to a more traditional LF/MF/HF 3-way system. The use of dual LF transducers also provides the benefit of extending usable LF pattern control by over an octave, reducing acoustic reflections in the room for better clarity and “projection.” Avia™ Digital Signal Processing Every aspect of the Vector CD1265 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Two channels of processing are employed to deliver an optimized signal to each transducer. Versatile Installation The Vector CD1265 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate either an optional yoke bracket or forged shoulder eyebolts (each sold separately).

Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CD1295 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer plus a second dedicated low-frequency transducer. The coaxial transducer is composed of a 12” (305 mm) LF driver and a 90° x 45° HF horn with 3” (76 mm) diaphragm compression driver. The second LF transducer is a 12” driver with enhanced low-frequency performance. Advanced engineering and construction of the complete speaker achieves a space-efficient design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The two 12” LF drivers work together in a bi-amplified configuration to achieve an increase in overall output and improved low-frequency pattern control. The coaxial transducer can be rotated in 45° increments to tailor high-frequency coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The LF/HF transducer in the Vector CD1295 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single neodymium magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, and the use of a single neodymium magnet reduces the speaker’s weight, size, and cost. Dual Low-Frequency Drivers The Vector CD1295 employs an innovative and unconventional bi-amplified 3-way configuration using dual 12” LF transducers. Relative to the coaxial transducer, the dedicated LF transducer features increased excursion capability below 100 Hz. The frequency range of both drivers overlaps at precise levels to achieve a flat summed response, producing a higher overall output level compared to a more traditional LF/MF/HF 3-way system. The use of dual LF transducers also provides the benefit of extending usable LF pattern control by over an octave, reducing acoustic reflections in the room for better clarity and “projection.” Avia™ Digital Signal Processing Every aspect of the Vector CD1295 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Two channels of processing are employed to deliver an optimized signal to each transducer. Versatile Installation The Vector CD1295 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate either an optional yoke bracket or forged shoulder eyebolts (each sold separately).

Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CD1565 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer plus a second dedicated low-frequency transducer. The coaxial transducer is composed of a 15” (381 mm) LF driver and a 60° x 45° HF horn with 3” (76 mm) diaphragm compression driver. The second LF transducer is a 15” driver with enhanced low-frequency performance. Advanced engineering and construction of the complete speaker achieves a space-efficient design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The two 15” LF drivers work together in a bi-amplified configuration to achieve an increase in overall output and improved low-frequency pattern control. The coaxial transducer can be rotated in 45° increments to tailor high-frequency coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The LF/HF transducer in the Vector CD1565 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single neodymium magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, and the use of a single neodymium magnet reduces the speaker’s weight, size, and cost. Dual Low-Frequency Drivers The Vector CD1565 employs an innovative and unconventional bi-amplified 3-way configuration using dual 15” LF transducers. Relative to the coaxial transducer, the dedicated LF transducer features increased excursion capability below 100 Hz, with a 4” (102 mm) voice coil and powerful ceramic magnet for extra output capacity and higher power handling. The frequency range of both drivers overlaps at precise levels to achieve a flat summed response, producing a higher overall output level compared to a more traditional LF/MF/HF 3-way system. The use of dual LF transducers also provides the benefit of extending usable LF pattern control by over an octave, reducing acoustic reflections in the room for better clarity and “projection.” Avia™ Digital Signal Processing Every aspect of the Vector CD1565 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Two channels of processing are employed to deliver an optimized signal to each transducer. Versatile Installation The Vector CD1565 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate forged shoulder eyebolts (sold separately).[1] Notes: 1. There is no yoke bracket available from Crestron for this model.

Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CD1595 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer plus a second dedicated low-frequency transducer. The coaxial transducer is composed of a 15” (381 mm) LF driver and a 90° x 45° HF horn with 3” (76 mm) diaphragm compression driver. The second LF transducer is a 15” driver with enhanced low-frequency performance. Advanced engineering and construction of the complete speaker achieves a space-efficient design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The two 15” LF drivers work together in a bi-amplified configuration to achieve an increase in overall output and improved low-frequency pattern control. The coaxial transducer can be rotated in 45° increments to tailor high-frequency coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The LF/HF transducer in the Vector CD1595 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single neodymium magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, and the use of a single neodymium magnet reduces the speaker’s weight, size, and cost. Dual Low-Frequency Drivers The Vector CD1595 employs an innovative and unconventional bi-amplified 3-way configuration using dual 15” LF transducers. Relative to the coaxial transducer, the dedicated LF transducer features increased excursion capability below 100 Hz, with a 4” (102 mm) voice coil and powerful ceramic magnet for extra output capacity and higher power handling. The frequency range of both drivers overlaps at precise levels to achieve a flat summed response, producing a higher overall output level compared to a more traditional LF/MF/HF 3-way system. The use of dual LF transducers also provides the benefit of extending usable LF pattern control by over an octave, reducing acoustic reflections in the room for better clarity and “projection.” Avia™ Digital Signal Processing Every aspect of the Vector CD1595 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Two channels of processing are employed to deliver an optimized signal to each transducer. Versatile Installation The Vector CD1595 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate forged shoulder eyebolts (sold separately).[1] Notes: 1. There is no yoke bracket available from Crestron for this model.

Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CS1265 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer composed of a 12” (305 mm) LF driver and a 60° x 45° HF horn with 3” (76 mm) diaphragm compression driver. Advanced engineering and construction achieve a space-efficient speaker design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The transducer can be rotated in 45° increments to tailor coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The transducer in the Vector CS1265 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single, powerful ceramic magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, resulting in performance rivaling a more expensive bi-amplified design. Using a single magnet also reduces the speaker’s weight, size, and cost. Avia™ Digital Signal Processing Every aspect of the Vector CS1265 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Versatile Installation The Vector CS1265 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate either an optional yoke bracket or forged shoulder eyebolts (each sold separately).

Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CS1295 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer composed of a 12” (305 mm) LF driver and a 90° x 45° HF horn with 3” (76 mm) diaphragm compression driver. Advanced engineering and construction achieve a space-efficient speaker design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The transducer can be rotated in 45° increments to tailor coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The transducer in the Vector CS1295 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single, powerful ceramic magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, resulting in performance rivaling a more expensive bi-amplified design. Using a single magnet also reduces the speaker’s weight, size, and cost. Avia™ Digital Signal Processing Every aspect of the Vector CS1295 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Versatile Installation The Vector CS1295 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate either an optional yoke bracket or forged shoulder eyebolts (each sold separately).

Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CS1565 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer composed of a 15” (381 mm) LF driver and a 60° x 45° HF horn with 3” (76 mm) diaphragm compression driver. Advanced engineering and construction achieve a space-efficient speaker design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The transducer can be rotated in 45° increments to tailor coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The transducer in the Vector CS1565 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single, powerful ceramic magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, resulting in performance rivaling a more expensive bi-amplified design. Using a single magnet also reduces the speaker’s weight, size, and cost. Avia™ Digital Signal Processing Every aspect of the Vector CS1565 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Versatile Installation The Vector CS1565 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate either an optional yoke bracket or forged shoulder eyebolts (each sold separately).

Loudspeaker – 15” 2-Way Coaxial 90° x 45° Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CS1595 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer composed of a 15” (381 mm) LF driver and a 90° x 45° HF horn with 3” (76 mm) diaphragm compression driver. Advanced engineering and construction achieve a space-efficient speaker design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The transducer can be rotated in 45° increments to tailor coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The transducer in the Vector CS1595 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single, powerful ceramic magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, resulting in performance rivaling a more expensive bi-amplified design. Using a single magnet also reduces the speaker’s weight, size, and cost. Avia™ Digital Signal Processing Every aspect of the Vector CS1595 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Versatile Installation The Vector CS1595 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate either an optional yoke bracket or forged shoulder eyebolts (each sold separately).

The Vector™ SUBD18 is a direct-radiating, vented subwoofer featuring two high-power, long-excursion 18” (457 mm) transducers. It is designed to provide extended low frequency support for use with CS and CD series Vector Performance Loudspeakers, and is capable of producing articulate and impactful deep bass response for all types of installed music and multimedia applications. The Vector SUBD18 requires use with a Crestron Avia™ DSP to ensure rated performance and reliable operation. It can be driven using either one or two amplifier channels. Its enclosure is optimally tuned to provide maximum low frequency output in a low-profile package designed to fit under low stages and other confined spaces. Vibration isolation feet are provided on the bottom, with aligned recesses on top for stacking of multiple units. Concealed M10 mounting points are included to allow for suspended installation using forged shoulder eyebolts (sold separately).