Different types of WC with minimal space. Editable with MEP Modeler.

WC for the disabled. Editable with MEP Modeler.

Piano with openable lid.

Different types of corner WC with minimal space. Editable with MEP Modeler.

Different types of WC with minimal space. Editable with MEP Modeler.

Piano with openable lid.

# Waste bin that holds 50 litres of paper, which means that the toilet environment stays clean # Made from ABS Plastic # Can be used with or without a lid # Can be wall mounted, freeing up floor space # Light, robust and simple to empty

# Waste bin that holds 25 litres of paper, which means that the toilet environment stays clean # Made from ABS Plastic # Can be used with or without a lid # Can be wall mounted, freeing up floor space # Light, robust and simple to empty

# Waste bin that holds 50 litres of paper, which means that the toilet environment stays clean # Made from ABS Plastic # Can be used with or without a lid # Can be wall mounted, freeing up floor space # Light, robust and simple to empty

# Waste bin that holds 25 litres of paper, which means that the toilet environment stays clean # Made from ABS Plastic # Can be used with or without a lid # Can be wall mounted, freeing up floor space # Light, robust and simple to empty

Different types of corner WC with minimal space. Editable with MEP Modeler.

WC for the disabled. Editable with MEP Modeler.

WC for the disabled. Editable with MEP Modeler.

#http://www.molok.com Version Date Modified by Info ------------------------------------------------------------------------------------------- 0.95 27.8.2010 JH Usable 1.00 13.10.2010 JH Ready 1.01 21.10.2010 JH Bio waste volume to be shown approximately 1.10 16.12.2013 JH Improved usability 1.11 05.12.2015 JH UI-update AC18 compatibility, lifting hook 1.2 16.02.2015 JH New covers, lids, properties, improved component counting 1.3 03.05.2017 JH new sign 1.4 12.05.2021 JH Drum lid, new waste types, lid colours ect. 1.5 25.08.2021 JH Printing facade Käyttäjävastuu --------------------------------------------------------------------------------- GDL Factory tai Molok Oy eivät takaa objektien virheetöntä toimintaa. Objektien käyttäminen tapahtuu käyttäjän omalla vastuulla. GDL Factory tai Molok Oy eivät ole vastuussa, jos objektien käytöstä aiheutuu suoraa tai välillistä taloudellista tai muuta vahinkoa. Objektikirjasto tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.molok.com Version Date Modified by Info ------------------------------------------------------------------------------------------- 0.95 27.8.2010 JH Usable 1.00 13.10.2010 JH Ready 1.01 21.10.2010 JH Bio waste volume to be shown approximately 1.10 16.12.2013 JH Improved usability 1.11 05.12.2015 JH UI-update AC18 compatibility, lifting hook 1.2 16.02.2015 JH New covers, lids, properties, improved component counting 1.3 03.05.2017 JH new sign 1.4 12.05.2021 JH Drum lid, new waste types, lid colours ect. 1.5 25.08.2021 JH Printing facade Käyttäjävastuu --------------------------------------------------------------------------------- GDL Factory tai Molok Oy eivät takaa objektien virheetöntä toimintaa. Objektien käyttäminen tapahtuu käyttäjän omalla vastuulla. GDL Factory tai Molok Oy eivät ole vastuussa, jos objektien käytöstä aiheutuu suoraa tai välillistä taloudellista tai muuta vahinkoa. Objektikirjasto tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.molok.com Version Date Modified by Info ------------------------------------------------------------------------------------------- 0.95 27.8.2010 JH Usable 1.00 13.10.2010 JH Ready 1.01 21.10.2010 JH Bio waste volume to be shown approximately 1.10 16.12.2013 JH Improved usability 1.11 05.12.2015 JH UI-update AC18 compatibility, lifting hook 1.2 16.02.2015 JH New covers, lids, properties, improved component counting 1.3 03.05.2017 JH new sign 1.4 12.05.2021 JH Drum lid, new waste types, lid colours ect. 1.5 25.08.2021 JH Printing facade Käyttäjävastuu --------------------------------------------------------------------------------- GDL Factory tai Molok Oy eivät takaa objektien virheetöntä toimintaa. Objektien käyttäminen tapahtuu käyttäjän omalla vastuulla. GDL Factory tai Molok Oy eivät ole vastuussa, jos objektien käytöstä aiheutuu suoraa tai välillistä taloudellista tai muuta vahinkoa. Objektikirjasto tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.molok.com Version Date Modified by Info ------------------------------------------------------------------------------------------- 0.95 27.8.2010 JH Usable 1.00 13.10.2010 JH Ready 1.01 21.10.2010 JH Bio waste volume to be shown approximately 1.10 16.12.2013 JH Improved usability 1.11 05.12.2015 JH UI-update AC18 compatibility, lifting hook 1.2 16.02.2015 JH New covers, lids, properties, improved component counting 1.3 03.05.2017 JH new sign 1.4 12.05.2021 JH Drum lid, new waste types, lid colours ect. 1.5 25.08.2021 JH Printing facade Käyttäjävastuu --------------------------------------------------------------------------------- GDL Factory tai Molok Oy eivät takaa objektien virheetöntä toimintaa. Objektien käyttäminen tapahtuu käyttäjän omalla vastuulla. GDL Factory tai Molok Oy eivät ole vastuussa, jos objektien käytöstä aiheutuu suoraa tai välillistä taloudellista tai muuta vahinkoa. Objektikirjasto tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.molok.com Version Date Modified by Info ------------------------------------------------------------------------------------------- 0.95 27.8.2010 JH Usable 1.00 13.10.2010 JH Ready 1.01 21.10.2010 JH Bio waste volume to be shown approximately 1.10 16.12.2013 JH Improved usability 1.11 05.12.2015 JH UI-update AC18 compatibility, lifting hook 1.2 16.02.2015 JH New covers, lids, properties, improved component counting 1.3 03.05.2017 JH new sign 1.4 12.05.2021 JH Drum lid, new waste types, lid colours ect. 1.5 25.08.2021 JH Printing facade Käyttäjävastuu --------------------------------------------------------------------------------- GDL Factory tai Molok Oy eivät takaa objektien virheetöntä toimintaa. Objektien käyttäminen tapahtuu käyttäjän omalla vastuulla. GDL Factory tai Molok Oy eivät ole vastuussa, jos objektien käytöstä aiheutuu suoraa tai välillistä taloudellista tai muuta vahinkoa. Objektikirjasto tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.molok.com Version Date Modified by Info ------------------------------------------------------------------------------------------- 0.95 27.8.2010 JH Usable 1.00 13.10.2010 JH Ready 1.01 21.10.2010 JH Bio waste volume to be shown approximately 1.10 16.12.2013 JH Improved usability 1.11 05.12.2015 JH UI-update AC18 compatibility, lifting hook 1.2 16.02.2015 JH New covers, lids, properties, improved component counting 1.3 03.05.2017 JH new sign 1.4 12.05.2021 JH Drum lid, new waste types, lid colours ect. 1.5 25.08.2021 JH Printing facade Käyttäjävastuu --------------------------------------------------------------------------------- GDL Factory tai Molok Oy eivät takaa objektien virheetöntä toimintaa. Objektien käyttäminen tapahtuu käyttäjän omalla vastuulla. GDL Factory tai Molok Oy eivät ole vastuussa, jos objektien käytöstä aiheutuu suoraa tai välillistä taloudellista tai muuta vahinkoa. Objektikirjasto tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

Vitreous china bidet Compatible with: 806640..4 Nexo Bidet lid

Vitreous china close-coupled WC with dual outlet Compatible with: 80178B..4 Dama Compact lacquered seat and cover for toilet 341784..0 Dama Dual flush 4,5/3L WC cistern without lid (one piece) 341782..0 Dama Dual flush 4,5/3L WC cistern 80178C..4 Dama Soft-closing compact lacquered seat and cover for toilet

Vitreous china wall-hung bidet Optional: 506402210 Aqua 1 1/4" trap for bidet Compatible with: 80662B..4 Hall Lacquered bidet lid

# 8 litres # Compact Design with flap lid # Made from ABS Plastic # Can be wall mounted, freeing up floor space # Light and simple to empty

# 8 litres # Compact Design with flap lid # Made from ABS Plastic # Can be wall mounted, freeing up floor space # Light and simple to empty

Coverbox Paradise Stainless Steel Ladycare Box for use in a CWS Ladycare Box. Optionaly also used as a Paper Bin. Coverbox made of matt brushed stainless steel 1.4301, brushed satin finish protects against fingerprints. Rounded edges ensure no risk of injury. Comes complete with fastening materials, delivery and installation. Ladycare Box: Stainless Steel Ladycare Box: 7776000 Paradise Ladycare Lid Black: 577200

Paper Bins Paradise Stainless Steel Paper Bin in 25, 40 l, and 60 l. Made of stainless steel, visible surfaces matt brushed, optionally available with automatically closing lid or opening frame and wall mount. Mount for bin bag is preinstalled. Box made of matt brushed stainless steel 1.4301, brushed satin finish protects against fingerprints. Rounded edges ensure no risk of injury. Comes complete with fastening materials, delivery and installation. Paper Bins: Stainless Steel Paper Bin 25l: 7752000, Weight: 4.19 Kg Stainless Steel Paper Bin 25l Lid: 307752000, Weight: 0.9 Kg Stainless Steel Paper Bin 25l Coverage: 307752100, Weight: 0.9 Kg Format: 450 × 300 × 200 mm Stainless Steel Paper Bin 40l: 7751000, Weight: 6.0 Kg Stainless Steel Paper Bin 40l Lid: 307751000, Weight: 0.9 Kg Stainless Steel Paper Bin 40l Coverage: 307751100, Weight: 0.9 Kg Format: 550 × 335 × 230 mm Stainless Steel Paper Bin 60l: 7750000, Weight: 6.5 Kg Stainless Steel Paper Bin 60l Lid: 307750000, Weight: 0.9 Kg Stainless Steel Paper Bin 60l Coverage: 307750100, Weight: 0.9 Kg Format: 740 × 350 × 250 mm Waste bags: various waste bags in different sizes and colours

The Tork waste bin can stand freely or be wall monted, has an optional lid and ensures a neat and clean appearance.

The Tork waste bin can stand freely or be wall monted, has an optional lid and ensures a neat and clean appearance.

Handicap model Outlet Ø110mm to floor Fixing on floor Water connection ½´ Floor standing and screwed to floor. Prepared for seat-lid, choose lid separately. Tested according to EN 997. Flushing capacity 6 litres. Purus Stainless steel toilets are practical for surroundings with tough requirements for durability, hygiene and the possibility for adjustments. For example in public toilets, sports centres, restaurants and public institutions. Stainless steel toilets are also an interesting alternative in specially designed environments such as high and low level security places.

Outlet Ø110mm to wall Fixing on floor Water connection ½´ Floor standing and screwed to floor. Prepared for seat-lid, choose lid separately. Tested according to EN 997. Flushing capacity 6 litres. Purus Stainless steel toilets are practical for surroundings with tough requirements for durability, hygiene and the possibility for adjustments. For example in public toilets, sports centres, restaurants and public institutions. Stainless steel toilets are also an interesting alternative in specially designed environments such as high and low level security places.

Handicaped model. Outlet Ø110mm to wall Fixing on floor Water connection ½´ Floor standing and screwed to floor. Prepared for seat-lid, choose lid separately. Tested according to EN 997. Flushing capacity 6 litres. Purus Stainless steel toilets are practical for surroundings with tough requirements for durability, hygiene and the possibility for adjustments. For example in public toilets, sports centres, restaurants and public institutions. Stainless steel toilets are also an interesting alternative in specially designed environments such as high and low level security places.

Outlet Ø110mm to floor Fixing on floor Water connection ½´ Floor standing and screwed to floor. Prepared for seat-lid, choose lid separately. Tested according to EN 997. Flushing capacity 6 litres. Purus Stainless steel toilets are practical for surroundings with tough requirements for durability, hygiene and the possibility for adjustments. For example in public toilets, sports centres, restaurants and public institutions. Stainless steel toilets are also an interesting alternative in specially designed environments such as high and low level security places.

THIS TYPICAL INCLUDES: 1 Wall Mounted Rail; 1 Locked Storage Container; 2 Tray/Shelves; 1 Locked Drawer w/Locked Lid, 6"H (152mm); 5 Drawers, 3"H (76mm); 3 Drawers, 6"H (152mm); 2 Tray/Shelves Divider; Drawer Organizer Bins; Consider the need for an E0921 to transport the locker from place to place.

Forty four (44) gallon trash can, 32" high X 24" diameter, with lid. Used to collect and transport refuse from a point of origin to point of disposal (example: from soiled utility or a nursing unit to the trash compactor at housekeeping).

Recycling container shall be approximately 30-gallons in capacity. The container may include a lid and be Recycle Blue in color with the recycle symbol identified on the container.

Mobile linen hamper with hand or foot operated lid. Made of heavy tubular stainless steel with heavy gauge welded steel platform. Holds 25" hamper bags. Mounted on ball bearing casters. For linen transport in hospitals and clinics.

A biohazard waste container with a step-on lid. The container will have a capacity of approximately 12 gallons and be made of a fire safe material.

Cryogenic freezer. This is a chest type unit that will maintain uniform temperatures to -140 and -150 degrees centigrade. It shall have a microprocessor control system, key-operated master switch for power and alarm, washable, reusable condenser filter to maintain peak operating efficiency and full-function safety system. The cabinet shall have a convenient size lid handle and lid locking provision to prohibit unauthorized access. The refrigerant shall be non-flammable and preferably CFC-free

A free-standing, cabinet mounted, single stainless steel chamber (minimum size 10X24X12), ultrasonic cleaner. The cleaning unit includes the following minimum features: power lid, automatic detergent injector, automatic level controls, automatic timer, and switch fill and drain controls. Sonic cleaning energy provided to the chamber by transducers which are powered by a solid-state generator(s) at a frequency of 40 kHz. Designed for use in surgery reprocessing areas, central processing departments and laboratories to clean surgical instruments and other hardware with sonic energy.

A free-standing, cabinet mounted ultrasonic cleaner, rinser and dryer with double stainless steel chambers (minimum sizes 10X24X12). The cleaning chamber includes the following minimum features: power lid, automatic detergent injector, automatic level controls, automatic timer, and switch fill and drain controls. Sonic cleaning energy provided to the chamber by transducers which are powered by a solid-state generator(s) at a frequency of 40 kHz. The rinse/dryer chamber is of the same basic design, size, and construction as the cleaning chamber. However, the chamber has pre-positioned spray nozzles to provide complete rinse and purified-water rinse coverage and thermostatically controlled recirculated forced hot air for drying. Cleaning and rinse/drying chambers are positioned for either right-to-left or left-to-right workflow. Designed for use to clean surgical instruments and other hardware with sonic energy and effectively spray rinse and dry items after sonic cleaning.

Svita Sky Vent System consist of fire ventilator, control unit, sensors and button for manual operation. Fire ventilator Sky Vent is equipped with an electro-mechanical opening device powered with 48 V DC which guarantees a large opening force and allows the system to handle large snow loads. Sky Vent fire ventilator is upward opening and equipped with a dome of 2,3 or 4 layers of acrylic, clear or opal. The lid opening angle exceeds 140 degrees. Upstand height 250 or 500 mm in the standard version, height up to 1000 mm is possible, the upstand is insulated with 50mm mineral wool. Fall protection mounted in the upstand by default. Size from 1000 x 1000 to 2400 x 1200 mm. The control unit contains battery as power back up source in case of power failure, accessories for comfort ventilation, such as wind and rain sensors are available. Intrusion Grids, flashings and separate indication for open ventilator available as accessory. The fire ventilators are certified according to EN 12101-2 and fulfills the requirements of SS 883006.

Svita Sky Vent System consist of fire ventilator, control unit, sensors and button for manual operation. Fire ventilator Sky Vent is equipped with an electro-mechanical opening device powered with 48 V DC which guarantees a large opening force and allows the system to handle large snow loads. Sky Vent fire ventilator is upward opening and equipped with a dome of 2,3 or 4 layers of acrylic, clear or opal. The lid opening angle exceeds 140 degrees. Upstand height 250 or 500 mm in the standard version, height up to 1000 mm is possible, the upstand is insulated with 50mm mineral wool. Fall protection mounted in the upstand by default. Size from 1000 x 1000 to 2400 x 1200 mm. The control unit contains battery as power back up source in case of power failure, accessories for comfort ventilation, such as wind and rain sensors are available. Intrusion Grids, flashings and separate indication for open ventilator available as accessory. The fire ventilators are certified according to EN 12101-2 and fulfills the requirements of SS 883006.

Svita Sky Vent System consist of fire ventilator, control unit, sensors and button for manual operation. Fire ventilator Sky Vent is equipped with an electro-mechanical opening device powered with 48 V DC which guarantees a large opening force and allows the system to handle large snow loads. Sky Vent fire ventilator is upward opening and equipped with a dome of 2,3 or 4 layers of acrylic, clear or opal. The lid opening angle exceeds 140 degrees. Upstand height 250 or 500 mm in the standard version, height up to 1000 mm is possible, the upstand is insulated with 50mm mineral wool. Fall protection mounted in the upstand by default. Size from 1000 x 1000 to 2400 x 1200 mm. The control unit contains battery as power back up source in case of power failure, accessories for comfort ventilation, such as wind and rain sensors are available. Intrusion Grids, flashings and separate indication for open ventilator available as accessory. The fire ventilators are certified according to EN 12101-2 and fulfills the requirements of SS 883006.

Svita Sky Vent System consist of fire ventilator, control unit, sensors and button for manual operation. Fire ventilator Sky Vent is equipped with an electro-mechanical opening device powered with 48 V DC which guarantees a large opening force and allows the system to handle large snow loads. Sky Vent fire ventilator is upward opening and equipped with a dome of 2,3 or 4 layers of acrylic, clear or opal. The lid opening angle exceeds 140 degrees. Upstand height 250 or 500 mm in the standard version, height up to 1000 mm is possible, the upstand is insulated with 50mm mineral wool. Fall protection mounted in the upstand by default. Size from 1000 x 1000 to 2400 x 1200 mm. The control unit contains battery as power back up source in case of power failure, accessories for comfort ventilation, such as wind and rain sensors are available. Intrusion Grids, flashings and separate indication for open ventilator available as accessory. The fire ventilators are certified according to EN 12101-2 and fulfills the requirements of SS 883006.

Svita Sky Vent System consist of fire ventilator, control unit, sensors and button for manual operation. Fire ventilator Sky Vent is equipped with an electro-mechanical opening device powered with 48 V DC which guarantees a large opening force and allows the system to handle large snow loads. Sky Vent fire ventilator is upward opening and equipped with a dome of 2,3 or 4 layers of acrylic, clear or opal. The lid opening angle exceeds 140 degrees. Upstand height 250 or 500 mm in the standard version, height up to 1000 mm is possible, the upstand is insulated with 50mm mineral wool. Fall protection mounted in the upstand by default. Size from 1000 x 1000 to 2400 x 1200 mm. The control unit contains battery as power back up source in case of power failure, accessories for comfort ventilation, such as wind and rain sensors are available. Intrusion Grids, flashings and separate indication for open ventilator available as accessory. The fire ventilators are certified according to EN 12101-2 and fulfills the requirements of SS 883006.

Svita Smoke Vent System consist of fire ventilator, control unit, sensors and button for manual operation. Fire ventilator Sky Vent is equipped with an electro-mechanical opening device powered with 48 V DC which guarantees a large opening force and allows the system to handle large snow loads. Smoke Vent fire ventilator is upward opening and equipped with a insulated steel sheet lid. The lid opening angle exceeds 140 degrees. Upstand height 250 or 500 mm in the standard version, height up to 1000 mm is possible, the upstand is insulated with 50mm mineral wool. Fall protection mounted in the upstand by default. Size from 1000 x 1000 to 2400 x 1200 mm. The control unit contains battery as power back up source in case of power failure, accessories for comfort ventilation, such as wind and rain sensors are available. Intrusion Grids, flashings and separate indication for open ventilator available as accessory. The fire ventilators are certified according to EN 12101-2 and fulfills the requirements of SS 883006.

Svita Smoke Vent System consist of fire ventilator, control unit, sensors and button for manual operation. Fire ventilator Sky Vent is equipped with an electro-mechanical opening device powered with 48 V DC which guarantees a large opening force and allows the system to handle large snow loads. Smoke Vent fire ventilator is upward opening and equipped with a insulated steel sheet lid. The lid opening angle exceeds 140 degrees. Upstand height 250 or 500 mm in the standard version, height up to 1000 mm is possible, the upstand is insulated with 50mm mineral wool. Fall protection mounted in the upstand by default. Size from 1000 x 1000 to 2400 x 1200 mm. The control unit contains battery as power back up source in case of power failure, accessories for comfort ventilation, such as wind and rain sensors are available. Intrusion Grids, flashings and separate indication for open ventilator available as accessory. The fire ventilators are certified according to EN 12101-2 and fulfills the requirements of SS 883006.

Svita Smoke Vent System consist of fire ventilator, control unit, sensors and button for manual operation. Fire ventilator Sky Vent is equipped with an electro-mechanical opening device powered with 48 V DC which guarantees a large opening force and allows the system to handle large snow loads. Smoke Vent fire ventilator is upward opening and equipped with a insulated steel sheet lid. The lid opening angle exceeds 140 degrees. Upstand height 250 or 500 mm in the standard version, height up to 1000 mm is possible, the upstand is insulated with 50mm mineral wool. Fall protection mounted in the upstand by default. Size from 1000 x 1000 to 2400 x 1200 mm. The control unit contains battery as power back up source in case of power failure, accessories for comfort ventilation, such as wind and rain sensors are available. Intrusion Grids, flashings and separate indication for open ventilator available as accessory. The fire ventilators are certified according to EN 12101-2 and fulfills the requirements of SS 883006.

Svita Smoke Vent System consist of fire ventilator, control unit, sensors and button for manual operation. Fire ventilator Sky Vent is equipped with an electro-mechanical opening device powered with 48 V DC which guarantees a large opening force and allows the system to handle large snow loads. Smoke Vent fire ventilator is upward opening and equipped with a insulated steel sheet lid. The lid opening angle exceeds 140 degrees. Upstand height 250 or 500 mm in the standard version, height up to 1000 mm is possible, the upstand is insulated with 50mm mineral wool. Fall protection mounted in the upstand by default. Size from 1000 x 1000 to 2400 x 1200 mm. The control unit contains battery as power back up source in case of power failure, accessories for comfort ventilation, such as wind and rain sensors are available. Intrusion Grids, flashings and separate indication for open ventilator available as accessory. The fire ventilators are certified according to EN 12101-2 and fulfills the requirements of SS 883006.

Svita Smoke Vent System consist of fire ventilator, control unit, sensors and button for manual operation. Fire ventilator Sky Vent is equipped with an electro-mechanical opening device powered with 48 V DC which guarantees a large opening force and allows the system to handle large snow loads. Smoke Vent fire ventilator is upward opening and equipped with a insulated steel sheet lid. The lid opening angle exceeds 140 degrees. Upstand height 250 or 500 mm in the standard version, height up to 1000 mm is possible, the upstand is insulated with 50mm mineral wool. Fall protection mounted in the upstand by default. Size from 1000 x 1000 to 2400 x 1200 mm. The control unit contains battery as power back up source in case of power failure, accessories for comfort ventilation, such as wind and rain sensors are available. Intrusion Grids, flashings and separate indication for open ventilator available as accessory. The fire ventilators are certified according to EN 12101-2 and fulfills the requirements of SS 883006.

The Cleanet Riva shower toilet features an integrated, high-quality ceramic design and technically sophisticated, user-friendly solutions. Laufen has successfully integrated all the technology in the closed ceramic body to create a classic aesthetic for beautiful bathroom interiors. The key feature of the premium toilet is its wide range of intuitive shower functions. The Cleanet Riva uses a clever operating concept on two levels: In everyday use, the shower toilet is operated by pushing or twisting the stainless steel rotary button at the side. The user can also select the basic or detailed settings using the touch screen remote control. The Cleanet Riva is the only shower toilet to feature a multi-stage hygiene concept in which the whole water circulation system is also thermally cleaned at regular intervals. For easy cleaning of the toilet, the design is joint-free and the ceramic has been treated with dirt-repellent LCC. The seat and lid also feature a quick-release function. The Cleanet Riva flushes powerfully for a clean finish, making a flushing rim and tunnel unnecessary.

This filter is manufactured with fibre-glass and polyester resin. Totally anticorrosive. Lid of Ø 400 mm. Supplied with manual air relief valve and water purge, media purge and pressure gauge panel. Fitted with collector arms and diffuser made from unplasticised PVC and polypropilene. Resistant to salt water. It contains newly designed larger and more resistant ABS collector arms. Filter bed height 1m. Maximum temperature: 50º C. Maximum pressure of either 2,5 kg/cm² or 4 kg/cm².

Range 477 Waste bin - cylindrical container with hinged lid - removable waste container - lid is opened by applying slight pressure to container with the knee or hand - integrated compartment for standard hygienic bags - only suitable for wall mounting - capacity approx. 6 litres - 330 mm high and 210 mm deep and 180 mm in diameter - made of high-quality polyamide in selected HEWI colours

Viega Eco Plus WC element with pre-setting full-flush volume approx. 4.5 l - for flush plates Visign, wall-hung WC - for pre-wall mounting please order separately: Viega Eco Plus fixing set model 8173 - flush actuation from front or top, dual flush technology Components powder-coated steel frame, concealed cistern 2L, WC connection elbow DN90 (depth-adjustable) made of PP, eccentric adapter DN90/100 made of PP, WC connection fitting, fixing material for element (for floor) and ceramic, screws (self-drilling) for fixing to metal support profiles, hole Ø 11 mm for fixing in wooden frame construction, alignment help Cistern components corner valve with pre-mounted water connection Rp½, filling valve set, drain valve set Technical data partial flush volume factory setting approx. 3 l partial flush volume setting range approx. 2.5–3 l full flush volume factory setting approx. 4.5 l full flush volume setting range approx. 4.5–6 l Note Immediate reflushing is possible at the factory settings! Dependent of the WC ceramic, the open WC lid may partially cover the flush plate while front actuation! When dealing with WC ceramic with a projection of less than 500 mm, such as e.g.: V & B Viala 765310, Viala 765210, Keramag Renova-Comprimo 204550, Joly 203060, the WC lid may fall shut, and therefore actuation from top should be applied! Flush plates and accessories: product group WC and urinal actuation accessories! Model8130.45 (article 718 992)

Wall-mounted toilet brush set without lid. Bacteriostatic 304 Stainless steel bright polished finish. Anti-theft blocking. Robust model. Easy to clean: plastic bowl can be removed from above. Plastic bowl with reservoir: avoids toilet brush sitting in residual water and reduces the risk of splashing when next used. Stainless steel body 1mm thick. Dimensions: Ø 90mm x 330mm. 10-year warranty.

Group thermostatic mixing valve for mixed water distribution from 32 - 42°C: Anti-scalding safety. Regulation of temperature variations. Filters and non-return valves can be accessed from the outside without removing the mechanism. Thermal shock with no specific lever needed (push-button on the control knob). Interchangeable cartridge with automotive cell. High-resistance chrome-plated brass body DZR. Maximum hot water temperature: 85°C. Differential hot water / mixed water: 15°C mini. Pressure differences at the inlets: 1 bar max (0.5 bar recommended). Minimum pressure / maximum: 1 - 10 bar (1 - 5 bar recommended). Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring). Mixed water outlet at the top (purple ring). For bottom outlet: unscrew / place lid at the top and outlet connector at the bottom. Maximum temperature limiter, can be adjusted by the installer. Reduced risk of scalding by limiting temperature at the point-of-use. 55 lpm - M¾" 10-year warranty.

Group thermostatic mixing valve for mixed water distribution from 32 - 42°C: Anti-scalding safety. Regulation of temperature variations. Filters and non-return valves can be accessed from the outside without removing the mechanism. Thermal shock with no specific lever needed (push-button on the control knob). Interchangeable cartridge with automotive cell. High-resistance chrome-plated brass body DZR. Maximum hot water temperature: 85°C. Differential hot water / mixed water: 15°C minimum. Pressure differences at the inlets: 1 bar maximum (0.5 bar recommended). Minimum pressure / maximum: 1 - 10 bar (1 - 5 bar recommended). Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring). Mixed water outlet at the top (purple ring). For bottom outlet: unscrew / place lid at the top and outlet connector at the bottom. Maximum temperature limiter, can be adjusted by the installer. Reduced risk of scalding by reducing the temperature at the point-of-use. 90 lpm at 3 bar - M1". 10-year warranty.

Wall-hung WC pan. Compatible with all standard frame systems available on the market. Elegant and simple design. Bacteriostatic 304 stainless steel. Stainless steel thickness: 1.5mm. One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene. WC bowl surface is polished with rounded edges for easy cleaning. Concealed perimetral flushing rim. Horizontal water inlet: Ø 55mm. Horizontal waste outlet: Ø 100mm. Water saving: works with 4L or more of water. Shrouded pan. Pre-drilled holes for fixing the toilet seat. Supplied with stainless steel blanking caps when installed without toilet seat lid. Quick and easy to install from the front thanks to a stainless steel mounting frame. Supplied with fixing plate and 6 theft prevention TORX security screws. CE marked. Complies with European standard EN 997 for 4L flush. Optional toilet seat with or without lid. Available for through-the-wall installation in service ducts. Weight: 11kg. 10-year warranty.

Wall-hung WC pan. 700mm elongated pan for improved comfort for people with reduced mobility. Compatible with all standard frame systems available on the market. Elegant and simple design. Bacteriostatic 304 stainless steel. Stainless steel thickness: 1.5mm. One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene. WC bowl surface is polished with rounded edges for easy cleaning. Concealed perimetral flushing rim. Horizontal water inlet: Ø 55mm. Horizontal waste outlet: Ø 100mm. Water saving: works with 4L or more of water. Shrouded pan. Pre-drilled holes for fixing the toilet seat. Supplied with stainless steel blanking caps when installed without toilet seat lid. Quick and easy to install from the front thanks to a stainless steel mounting frame. Supplied with fixing plate and 6 theft prevention TORX security screws. CE marked. Complies with European standard EN 997 for 4L flush. Optional toilet seat with or without lid. Available for through-the-wall installation in service ducts. Weight: 14.5kg. 10-year warranty.

Floor-standing WC pan with dual flush cistern 3/6 L. Bacteriostatic 304 stainless steel. Stainless steel thickness: 1.5mm. One-piece pressed WC bowl, seam-free for better hygiene. WC bowl surface is polished with rounded edges for easy cleaning. Concealed perimetral flushing rim. Water supply can be recessed from below or exposed from the side (right/left). Recessed horizontal or vertical waste outlet. Supplied with PVC pipe. Pre-drilled holes for fixing the toilet seat. Supplied with stainless steel blanking caps when installed without toilet seat lid. Quick and easy to install: 2 access panels with theft prevention TORX security screws. CE marked. Complies with European standard EN 997 for 4L flush. Optional toilet seat with or without lid. Weight: 21kg. 10-year warranty.

Rekta’s cubic shape is easy to position alongside walls, or in corners. The openings are sized to indicate the types of waste permitted and pre-sort them for recycling. The litterbin may be ordered with perforated sides, which appear to break down its mass and give it a weightless character. Text or logos can be laser-cut into the metal panels shaping the litterbin’s back and sides. Inner rings hold the plastic liners in place, which can be easily replaced through a side door or the lid. Design: Christina Jonsson

Complete toilet set: BTW Clean Rim WC pan P-trap outlet and bolting kit. Low cistern pan with lid and dual push-button mechanism 4,5/3 litres. Side inlet. Fixed seat. Chromed hinges. Options: Low cistern pan with lid and dual push-button mechanism 4,5/3 litres. Bottom left inlet. Soft-closing system seat.

Complete toilet set: BTW WC pan P-trap outlet and bolting kit. Low cistern pan with lid and dual push-button mechanism 4,5/3 litres. Side inlet. Fixed seat. Chromed hinges. Options: Low cistern pan with lid and dual push-button mechanism 4,5/3 litres. Bottom left inlet. Soft-closing system seat.

Stainless steel soap dispenser in satin finish with proximity sensor. Powered by 6 AA-size batteries (not included) and has tamper-resistant viewing window, removable lid with special lock and key. Capacity: 35 fl. oz. (1 L).

Wall mounred waste sanitary napkin disposal unit equipped with top cover door and cabinet. Waste capacity of 1.2 gal (4,6 l) construction. Lid is secured to the cabinet with a heavy-duty multi-staked concealed piano hinge.

Waste bin in stainless steel, with lid. For sanitary towels. Volume 48 l. Supplied with waste bucket (12 l) in plastic. All products are created in stainless steel, a durable and hygienic material that is maintenance-free and easy to clean. Polished finish enhances the clean appearance.

Waste bin in stainless steel, with lid. For sanitary towels. Outer dimension: 156x454x165 mm Volume: 6,5 L Exclusive, sculptural and stylish - Millinox has a curved shape with a satin finish. The series is created by designer Odd Thorsen, one of the foremost and most successful product designers. Thorsen has a systematic approach to design and ensures function and aesthetics play an equal role in all his projects.

Metal inset holder for hollow bollard (ref. 88860) [LIST] Allows the bollard to be removed if required Operates with a universal key (included) There is a lid for covering the hole when the bollard is not in place; this prevents the entry of dirt and avoids accidents [/LIST]

Small container with Connect Space lid for upper drawer vanity units. 112x75x78mm

Big Boy white Urinal 31x39 with pre-punched holes to fix the lid

Sfera 63 Close-Coupled WC with Ceramic Cistern with Lid Special coating treatment Cataglaze ® fired at 1250°into the ceramics

Zero 62 Close-Coupled WC with Ceramic Cistern with Lid Special coating treatment Cataglaze ® fired at 1250°into the ceramics

AISI-304 stainless steel exterior, rear side galvanized panel - AISI-304 stainless steel interior, stamped bottom and rounded corners - Doors with self closing system, blocked opening, magnetic gasket and possibility of changing the opening sense - Inner side of doors by stamped steel - Stainless steel worktop, integrated topping unit with inged lid, GN 1/3- 100 capacity - GN 1/3-150 topping unit - Capacity for 60x40 shelves, containers or trays by stainless steel slides, height adjustable - AISI -304 adjustable legs, 135 to 210 mm - Removable and fan assisted condenser unit - Fan assisted evaporator, with epoxi anticorrosion coating. - Automatic evaporation of defrost water - 40 Kg/m³ density polyurethane insulation, zero ODP and GWP - Digital temperature control, optimized defrost, high-temperature condensation alarm. Efficient management of energy consumption - Operating temperature, 32°C ambient - OPTIONAL: 525x400 working grill with drip pan

Refrigerated Preparation Counter PC80-200 - AISI-304 stainless steel exterior, rear side included - AISI-304 stainless steel interior, stamped bottom and rounded corners - Doors with self closing system, blocked opening, magnetic gasket and possibility of changing the opening sense - Inner side of doors by stamped steel - AISI-304 worktop, capacity for GN containers (see detail) - Poliethylene cutting table - Fixed pan dividers (detachable for cleaning) - Heavy-duty double liftable glass lid to keep temperature in the GN pans - Maximum product visibility (LEDs optional) - Perimetral gasket arround the lid structure - Piston system to help the opening /closing of the structure- Shelves made of plasticized steel wire, height adjustable by stainless steel slides - AISI -304 adjustable legs, 135 to 210 mm - Removable and fan assisted condenser unit - Fan assisted evaporator, with epoxi anticorrosion coating. - Automatic evaporation of defrost water - 40 Kg/m³ density polyurethane insulation, zero ODP and GWP - Digital temperature control, optimized defrost, high-temperature condensation alarm. Efficient management of energy consumption - Operating temperature 32°C ambient

Refrigerated Preparation Counter SDT-48 - Stainless steel interior and exterior, rear side galvanized panel - Doors with self closing system, blocked opening, magnetic gasket and possibility of changing the opening sense - AISI-304 stainless steel worktop, with detachable white polyethylene table - Shelves made of plasticized steel wire, height adjustable - GN capacity in the worktop - AISI 304 stainless steel lid, isolated and hinged - Shelves made of plasticized steel wire, height adjustable - Castors as standard (2 with brakes + 2 without) - Fan assisted condenser unit - Fan assisted evaporator, with epoxi anticorrosion coating. - Automatic evaporation of defrost water - 40 Kg/m³ density polyurethane insulation, zero GWP and zero ODP effect - Digital temperature control, optimized defrost, high-temperature condensation alarm. Efficient management of energy consumption - Operating temperature 0°C +8°C , 38°C ambient

Range 477 Soap dispenser - cylindrical container in ring-shaped, wall-mounted bracket - used to hold standard liquid soap - allows one-hand operation - soap dosage control by means of a large push-button at the front - container can be removed - anti-theft protection through concealed screw fixing - lockable container lid - with wall-mounted base to conceal drill holes - 70 mm wide, 208 mm high, 122 mm deep, diameter of container 75 mm, capacity 500 ml - wall-mounted base and holder made of high-quality polyamide according to HEWI colour chart - push-button made of high-quality polyamide in HEWI colour 92 (anthracite grey) - container and lid made of matt white transparent synthetic material Article no.: HEWI 477.06.10005

Range 805 Hygiene combination - cubic body with recessed wall base - used as container for hygiene waste, capacity approx. 6 l - concealed, integrated bag holder - with an integrated holder for standard hygiene bags made of synthetic material. (max. package size L 130 x B 90 x H 20 mm) - lid with lifting flap - 160 mm wide, 300 mm high and 140 mm deep - for wall mounting - bin and lid made of high-quality stainless steel with satin surface finish - opening made of high-quality polyamide in HEWI 90 (jet black), 92 (anthracite grey), 98 (signal white) or 99 (pure white) - including non-corrosive HEWI fixing material. Article no.: HEWI 805.05.210