http://www.archibloq.com Model prepared in "old times" in ArchiCAD version 6.5 by scripting in GDL language only - no Morphs, no add-ons, no imported meshes from 3ds :-) Its was made as exhibit for virtual Techician Museum project. User interface was rewritten for version 12.

3D parametric, Skandiform La Bomba F-280 armchair

3D parametric, Skandiform La Bomba SA-281 sofa

3D parametric, Skandiform La Bomba LB-615 table

3D parametric, Skandiform La Bomba LB-616 table

Cassero - Vespaio Ventilato Moduli in polipropilene riciclato e tubi in PVC per la realizzazione di vespai aerati Misura base 50 Cm altezza cm 40

ANTENNA LOGARITMICA - TV La cura posta nella progettazione si riflette anche nella speciale connessione del dipolo che garantisce affidabilità del contatto nel tempo. Grazie allo speciale attacco a palo è possibile installare l’antenna sia in polarizzazione verticale sia in orizzontale senza adattatori o altri accessori. Dotate di eccellente resistenza meccanica di fissaggio degli elementi alla culla, ottima resistenza meccanica alla rotazione sul palo, buone prestazioni elettriche. Il connettore F è protetto da una copertura di gomma- CARATTERISTICHE •Banda III + UHF •Canali E5-E12 E21-E69 •Banda passante MHz 174-230 / 470-862 •Guadagno massimo dBi 9.5 / 11 •Rapporto avanti-indietro dB 24 / 32 •Return loss dB -16 / -16 5 •Larghezza del fascio (-3dB) ° +/- 34 +/- 31 •Impedenza Ohm 75 •Dimensioni (Lungh x Largh) cm 210x88 •Attacco a palo. Diametro max mm 60 •Connettore Tipo F •Polarizzazione orizzontale Incluso •Regolazione zenitale orizzontale PV10 •Polarizzazione verticale Incluso •Regolazione zenitale verticale PV10 PALO NON INCLUSO

Conteneur enterré ordures ménagères de marque ASTECH et de contenance 5m3. La plateforme acier doit être au niveau du sol, le reste étant enterré

Postazione di lavoro di ufficio con scrivania rettangolare.

Conteneur enterré TRI SÉLECTIF de marque ASTECH et de contenance 5m3. La plateforme acier doit être au niveau du sol, le reste étant enterré

Conteneur enterré pour récupération du VERRE de marque ASTECH et de contenance 5m3. La plateforme acier doit être au niveau du sol, le reste étant enterré

Esta libreria hace la funcion de cubrir el hueco de una escalera.

Jatoba La Paz is a dark, somewhat reddish floor that is FSC certified.

Sancal turned to Note, a Swedish design studio to provide some relief for weary travellers. They came up with La Isla as a solution. Its seductive curves and soft upholstery call out to all those navigating a lobby, desperately seeking refuge.

Sancal turned to Note, a Swedish design studio to provide some relief for weary travellers. They came up with La Isla as a solution. Its seductive curves and soft upholstery call out to all those navigating a lobby, desperately seeking refuge.

Sancal turned to Note, a Swedish design studio to provide some relief for weary travellers. They came up with La Isla as a solution. Its seductive curves and soft upholstery call out to all those navigating a lobby, desperately seeking refuge.

Facing Brick Smooth White Álava is the affordable choice for those projects that look for a white expression in their façades. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

It stands as the purest white model of La Paloma Cerámica y Gres. A unique texture combined with its spectacular color, make White Smooth Ártico the most in demand among the wide range of La Paloma Cerámica y Gres. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

A beautiful white smooth color that offers striking expressions, White Navarra provides high aesthetic and technical characteristics. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

White Oporto stands out by its smooth sand colour which provides an elegant and shiny look to the façade. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Grey Alicante is the lightest grey of La Paloma Cerámicas. It represents the required transition from white to grey in order to provide an entire color range. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Characterised by slight differences in its tone, Grey Escorial Smooth Brick plays with dark and light tonalities providing spectacular finishes in building façades. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Grey Otero Smooth Brick is presented as the most regular tone within the grey range of La Paloma Cerámicas. With a lighter appearance than Gris Escorial, Gris Otero is one of the most demanded models among klinker quality for both, the current architectural trend and its neutral color. Gris Otero is often used in different combinations. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Brown Asturias presents a brown hue that denotes a slight reddish tint, giving to the product strong charcter and to the façade, simplicity and elegance. This is the intermediate model among the brown range, just below Marrón Laredo and with less prone to red tone than Marrón Mieres. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Brown Galicia presents a brown color with slight differences in tone that provides to building façades high aesthetic and technical characteristics. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Brown Laredo is the darkest model with the most intense pigmentation of the brown range. A higher intense and traditional brown that approaches to what in general speaking is known as "chocolate brown". The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Brown Mieres has the lightest tone within the brown range, located in a chromatic scale between brown and red. Keeping on with current market demands, La Paloma Cerámicas offers a wide range of possibilities for projects that address this range of color. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Negro Lanzarote is the most purely black of La Paloma Cerámicas. Either with clear or dark mortar joints creates in buildings façades an effect of special elegance. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Timanfaya Blue especially attracts attention because of its special set of dark chromatics, offering an alternative to traditional blue façades. With sunlight, its sides offer a spectacular and different set of brightness giving a characteristic flashing image to the façade. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Black Orotava is the third in joining to the range of different blacks. Each one of these models covers a specific market demand. In this case, Negro Orotava brings to the architcts a less dark version of Negro Lanzarote Facing Brick. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Aragón Smooth Ochre is halway in intensity among the ochre range characterised for its variety in tones. Guadarrama will be the bick with less intensity and Castilla will be the darkest choice. Aragón works extremely well in natural environments, for this reason, it is widely used in residential areas with parks and gardens. The 4-face finish allows maximum use of the two stretches, saving in costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Clinker brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Castilla is the original among the ochre flashing range. With an unmistakable appearance countless examples of homes with Castilla Facing Brick are observed along the Spanish geography. Castilla Facing Brick works extremely well in natural environments, for this reason is widely used in residential areas with parks and gardens. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Guadarrama presents the clearest tone of the ochre flashing range. Since company origins this model has accompanied the catalogue and still working perfectly with greater acceptance in residential houses than in buildings, although there are examples of buildings with grat architectural value). The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Levante is a classic model in the catalogue of La Paloma Cerámicas. With an ochre hue and a very slight flashing, Levante draws smooth chromatics in façades. It is ideal for rustic environments. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Red Bilbao is the brick within the red range that does not present tonality variation. With high demand in the north of Spain, its klinker quality gives excellent performance to harsh climates. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Very characteristic from the British Islands, Red Inglés presents different tones of red which randomly placed, shapes an excellent aesthetic. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Red Granada is characterised by its red variety of tones. This unique way of shaping façades, adds aesthetic value in conjuction with a clear mortar joint. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Blue Cobalto Glazed Brick gives light and vitality to the façade. It stands for its characteristic blue bright resistance to time. La Paloma Cerámicas combines a long backgroud manufacturing facing glazed bricks using the latest technology in order to reach high quality finishes. Glazed bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

White Pirineo Matt is the white matt alternative for those projects that look for avoid glossy elements that could distort the original chromatic appearance reqired. It presents a pure white, giving to façades the advantages inherent to this color. La Paloma Cerámicas combines a long backgroud manufacturing facing bricks using the latest technology in order to reach high quality finishes. Pirineo bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

White Pirineo Glazed sets the white difference in façades due to its versatility and adaptability to the environment. A set of brights makes the building an "artistic expression". La Paloma Cerámicas combines a long backgroud manufacturing facing bricks using the latest technology in order to reach high quality finishes. Pirineo bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Black Arrecife gives a clean appearance that stands for its homogeneity. La Paloma Cerámicas combines a long backgroud manufacturing facing bricks using the latest technology in order to reach high quality finishes. Arrecife bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Grey Glazed has a bright finish grey texture. Withing the most demanded models, current architectonic trends look for neutral colors and this grey is presented as an affordable option. La Paloma Cerámicas combines a long backgroud manufacturing facing glazed bricks using the latest technology in order to reach high quality finishes. Glazed bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Green Glazed stands for the intensity of its green bright color. It is especially suitable for residential areas. La Paloma Cerámicas combines a long backgroud manufacturing facing glazed bricks using the latest technology in order to reach high quality finishes. Glazed bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

The range of Brick Slips Klinker of La Paloma Cerámicas is the same as that of Facing Bricks (same texture and color). Easy to fix with adhesive (cement, glue…) and simple tools (trowel, toothed spatula, tile cutter and nails). Fast and easy. Both for renovation or new work, Brick Slip is a fast and clean choice for cladding. Blanco Ártico Brick Slip is the most in demand among the wide range of La Paloma Cerámicas Catalogue. Natural and permanent Colour. The beauty of the stoneware bricks produced by La Paloma Cerámica y Gres is permanent because it achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

The range of Brick Slips Klinker of La Paloma Cerámicas is the same as that of Facing Bricks (same texture and color). Easy to fix with adhesive (cement, glue…) and simple tools (trowel, toothed spatula, tile cutter and nails). Fast and easy. Both for renovation or new work, Brick Slip is a fast and clean choice for cladding. Gris Otero Brick Slip is presented as the most regular tone within the grey range of La Paloma. With a lighter appearance than Gris Escorial, Gris Otero is one of the most demanded models among klinker quality for architectural trend and its neutral color. Gris Otero is often used in different combinations. Natural and permanent Colour. The beauty of the stoneware bricks produced by La Paloma Cerámica y Gres is permanent because it achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

The range of Brick Slips Klinker of La Paloma Cerámicas is the same as that of Facing Bricks (same texture and color). Easy to fix with adhesive (cement, glue…) and simple tools (trowel, toothed spatula, tile cutter and nails). Fast and easy. Both for renovation or new work, Brick Slip is a fast and clean choice for cladding. Ocre Guadarrama Brick Slip presents the clearest tone of the ocre flashing range. Since company origins this model has accompanied the catalogue and still working perfectly with greater acceptance in residential houses than in buildings, although there are examples of buildings with grat architectural value. Natural and permanent Colour. The beauty of the stoneware bricks produced by La Paloma Cerámica y Gres is permanent because it achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

The range of Brick Slips Klinker of La Paloma Cerámicas is the same as that of Facing Bricks (same texture and color). Easy to fix with adhesive (cement, glue…) and simple tools (trowel, toothed spatula, tile cutter and nails). Fast and easy. Both for renovation or new work, Brick Slip is a fast and clean choice for cladding. Rojo Bilbao Brick Slip is the model within red range that does not present tonality variation. With high demand in the north of Spain, its klinker quality gives excellent perormance to harsh climates. Natural and permanent Colour. The beauty of the stoneware bricks produced by La Paloma Cerámica y Gres is permanent because it achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

INSULATION PANEL + BRICK SLIPS. La Paloma Cerámicas develops TermoKlinker; a cobined insulation system of extruded polyestyrene + ceramic brick slips, designed for exterior and interior façade restoration or new buildings. The range of Brick Slips that forms TermoKlinker system is the same as that of Facing Bricks (same texture and color). TermoKlinker is designed and installed in accordance with the European Technical Approval of "Veture kits - Prefabricated units for external wall insulation" (Not ETICS) ETAG 017. The prefabricated veture units panels are made of an insulation material (XPS) bonded in factory to an external discontinuous skin of ceramic slips, with a grouting mortar applied on-site. The panels are fixed with mechanical fixinga and ancillary items. They will be sealed with a sealant and grouted with a grouting cement-based mortar. Acoustic and thermal efficiency of a building, starts in the façade, it is one of the main points to consider, it is the area in which more heat or cold transmission occurs and the main barrier against external noise. There is no doubt that we should avoid thermal bridge effect as far as possible. In this respect, houses also benefit from the high efficiency thermal envelope of a building with TermoKlinker.

INSULATION PANEL + BRICK SLIPS. La Paloma Cerámicas develops TermoKlinker; a cobined insulation system of extruded polyestyrene + ceramic brick slips, designed for exterior and interior façade restoration or new buildings. The range of Brick Slips that forms TermoKlinker system is the same as that of Facing Bricks (same texture and color). TermoKlinker is designed and installed in accordance with the European Technical Approval of "Veture kits - Prefabricated units for external wall insulation" (Not ETICS) ETAG 017. The prefabricated veture units panels are made of an insulation material (XPS) bonded in factory to an external discontinuous skin of ceramic slips, with a grouting mortar applied on-site. The panels are fixed with mechanical fixinga and ancillary items. They will be sealed with a sealant and grouted with a grouting cement-based mortar. Acoustic and thermal efficiency of a building, starts in the façade, it is one of the main points to consider, it is the area in which more heat or cold transmission occurs and the main barrier against external noise. There is no doubt that we should avoid thermal bridge effect as far as possible. In this respect, houses also benefit from the high efficiency thermal envelope of a building with TermoKlinker.

INSULATION PANEL + BRICK SLIPS. La Paloma Cerámicas develops TermoKlinker; a cobined insulation system of extruded polyestyrene + ceramic brick slips, designed for exterior and interior façade restoration or new buildings. The range of Brick Slips that forms TermoKlinker system is the same as that of Facing Bricks (same texture and color). TermoKlinker is designed and installed in accordance with the European Technical Approval of "Veture kits - Prefabricated units for external wall insulation" (Not ETICS) ETAG 017. The prefabricated veture units panels are made of an insulation material (XPS) bonded in factory to an external discontinuous skin of ceramic slips, with a grouting mortar applied on-site. The panels are fixed with mechanical fixinga and ancillary items. They will be sealed with a sealant and grouted with a grouting cement-based mortar. Acoustic and thermal efficiency of a building, starts in the façade, it is one of the main points to consider, it is the area in which more heat or cold transmission occurs and the main barrier against external noise. There is no doubt that we should avoid thermal bridge effect as far as possible. In this respect, houses also benefit from the high efficiency thermal envelope of a building with TermoKlinker.

INSULATION PANEL + BRICK SLIPS. La Paloma Cerámicas develops TermoKlinker; a cobined insulation system of extruded polyestyrene + ceramic brick slips, designed for exterior and interior façade restoration or new buildings. The range of Brick Slips that forms TermoKlinker system is the same as that of Facing Bricks (same texture and color). TermoKlinker is designed and installed in accordance with the European Technical Approval of "Veture kits - Prefabricated units for external wall insulation" (Not ETICS) ETAG 017. The prefabricated veture units panels are made of an insulation material (XPS) bonded in factory to an external discontinuous skin of ceramic slips, with a grouting mortar applied on-site. The panels are fixed with mechanical fixinga and ancillary items. They will be sealed with a sealant and grouted with a grouting cement-based mortar. Acoustic and thermal efficiency of a building, starts in the façade, it is one of the main points to consider, it is the area in which more heat or cold transmission occurs and the main barrier against external noise. There is no doubt that we should avoid thermal bridge effect as far as possible. In this respect, houses also benefit from the high efficiency thermal envelope of a building with TermoKlinker.

Jerusalem joints elegance, tradition and technology. It stands for being a handmade brick development with high technical and aesthetical performance, fundamentally influenced by its long dimension and its handmade characteristic. Ancient manufacturing techniques carryed out for centuries, are now present in this brick that La Paloma Cerámicas has offered to the world of architecture. Warmth and beauty have always being part of stonewhare products, this fact is even more appreciable in this brick. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents.

Jerusalem joints elegance, tradition and technology. It stands for being a handmade brick development with high technical and aesthetical performance, fundamentally influenced by its long dimension and its handmade characteristic. Ancient manufacturing techniques carryed out for centuries, are now present in this brick that La Paloma Cerámicas has offered to the world of architecture. Warmth and beauty have always being part of stonewhare products, this fact is even more appreciable in this brick. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents.

Jerusalem joints elegance, tradition and technology. It stands for being a handmade brick development with high technical and aesthetical performance, fundamentally influenced by its long dimension and its handmade characteristic. Ancient manufacturing techniques carryed out for centuries, are now present in this brick that La Paloma Cerámicas has offered to the world of architecture. Warmth and beauty have always being part of stonewhare products, this fact is even more appreciable in this brick. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents.

Cestino per la spazzatura con doghe in legno.

Choix de photos de personnes pour utilisation en 3D avec symboles 2D correspondant, la photo fait automatiquement face à la caméra.

Este accesorio de forjado permite crear un forjado colaborante recubriendo con una chapa laminada la superficie del forjado. Con una fácil e intuitiva interfaz, podemos mover el punto caliente en planta para dirigir la dirección de la chapa, en las propiedades del elemento podemos crear a nuestra medida el perfil de las láminas y en el 3D, y en las propiedades del elemento, podemos poner a la altura que queramos la chapa para crear nuestro forjado colaborante a gusto. El último paso sería utilizar el objeto como elemento de sustracción con extrusión en la dirección que deseamos para que nuestro forjado sea totalmente real.

Este Objeto cuadro es una actualización del Objeto Cuadro 18 de la biblioteca de ArchiCAD. Debido a un bug que ocurre en Mac con Cinerender (cuando se renderiza, las imágenes de los cuadros salen transparentes), este cuadro salta ese bug si se inhabilita el canal alpha de las imágenes, además de dar más funcionalidades a estas.

Lampadaire Streetlight 10 midi LED pour un montage sur mât ou au sommet du mât | avec des LED blanches à réflecteurs, pour une répartition uniforme, asymétrique extensive de la lumière; avec un cache d'éclairage plat moulé | système électronique LED commandé par microprocesseur; avec des fonctions de commande de gestion de l'éclairage et de contrôle* | boîtier et bride de mât en aluminium coulé sous pression, fer micacé Siteco® (DB 702S); cache en PMMA

Lunis 2® mini, downlight, orientation de la lumière avec réflecteur Darklight, en plastique, métallisé en aluminium, brillant, BAP65 (L≤ 1000cd/m²), diffusion de lumière: direct distribution, LED couleur de lumière: 830, blanc chaud, ballast: BE, avec borne, 3 broches, 2,5mm² max., raccordement au secteur: 230V, AC, 50Hz, boîtier de luminaire, en plastique, blanc, diamètre: 172 mm, profondeur d’encastrement: 180 mm, zone de serrage: 1..40mm, bague de montage, plat, en plastique, blanc, degré de protection (total): IP20, classe de protection (total): CS I (mise à la terre), marquage: CE, ENEC en préparation, température ambiante admissible à l’intérieur: ≤ +25°C,

Modario®, élément de projecteur, en acier, aluminium blanc (RAL 9006), longueur: 598 mm, hauteur: 280mm, LED couleur de lumière: 840, blanc froid, ballast: BE, avec connecteur, 3 broches, avec sélection de phase, raccordement au secteur: 230V, AC, 0/50..60Hz, ballast intégré, orientation de la lumière primaire avec réflecteur, en aluminium, degré de protection (total): IP20, classe de protection (total): CS I (mise à la terre), marquage: CE, ENEC, symbole de protection: F, température ambiante admissible à l'intérieur: +10..+35°C, unité d'emballage: 1 pièce

Suspension en feutre gris clair. "Maria" est une suspension réalisée en bandes de feutres cousues et éditée par dix heures dix. Présentée lors du salon Maison&Objet de janvier 2013, "Maria" étonne dans le choix des matériaux qui la composent. Son abat-jour est une répétition de pièces de feutres renforcées de tiges de fibre de verre. Identiques et cousues entre elles, elles diffusent la lumière de manière chaleureuse et douce.

Connect Freedom-Lavabo monoforo con ampia zona sottolavabo e sottobordo conformato in modo da facilitare la presa.

Connect Freedom-Lavabo monoforo con ampia zona sottolavabo e sottobordo conformato in modo da facilitare la presa.

Lave-mains 50 x 23,5 cm - Percé 1 trou pour la robinetterie Poids : 6 kg

URSA PUREONE is a mineral wool product used in thermal and acoustic insulation of buildings which offers a high performance and many advantages: High performance. URSA PUREONE offers an excellent thermal and acoustic insulation. Its composition technology allows URSA offer a Warranty of 25 years. Its soft-touching, it does not generate dust, fire resistant... The acrylic base technology of its binder grants its high performance. Easy to install. Its soft-touching, it does not generate dust, it does not make the skin get irritated,… It has obtain the First Award 2014- 2015 in “Trophées de la Maison”. Best Inner Air Quality. The URSA PUREONE technology has a 0% of emission of COV, optimizing the quality of the inner air.

URSA PUREONE is a mineral wool product used in thermal and acoustic insulation of buildings which offers a high performance and many advantages: High performance. URSA PUREONE offers an excellent thermal and acoustic insulation. Its composition technology allows URSA offer a Warranty of 25 years. Its soft-touching, it does not generate dust, fire resistant... The acrylic base technology of its binder grants its high performance. Easy to install. Its soft-touching, it does not generate dust, it does not make the skin get irritated,… It has obtain the First Award 2014- 2015 in “Trophées de la Maison”. Best Inner Air Quality. The URSA PUREONE technology has a 0% of emission of COV, optimizing the quality of the inner air.

URSA PUREONE is a mineral wool product used in thermal and acoustic insulation of buildings which offers a high performance and many advantages: High performance. URSA PUREONE offers an excellent thermal and acoustic insulation. Its composition technology allows URSA offer a Warranty of 25 years. Its soft-touching, it does not generate dust, fire resistant... The acrylic base technology of its binder grants its high performance. Easy to install. Its soft-touching, it does not generate dust, it does not make the skin get irritated,… It has obtain the First Award 2014- 2015 in “Trophées de la Maison”. Best Inner Air Quality. The URSA PUREONE technology has a 0% of emission of COV, optimizing the quality of the inner air.

URSA PUREONE is a mineral wool product used in thermal and acoustic insulation of buildings which offers a high performance and many advantages: High performance. URSA PUREONE offers an excellent thermal and acoustic insulation. Its composition technology allows URSA offer a Warranty of 25 years. Its soft-touching, it does not generate dust, fire resistant... The acrylic base technology of its binder grants its high performance. Easy to install. Its soft-touching, it does not generate dust, it does not make the skin get irritated,… It has obtain the First Award 2014- 2015 in “Trophées de la Maison”. Best Inner Air Quality. The URSA PUREONE technology has a 0% of emission of COV, optimizing the quality of the inner air.

URSA PUREONE is a mineral wool product used in thermal and acoustic insulation of buildings which offers a high performance and many advantages: High performance. URSA PUREONE offers an excellent thermal and acoustic insulation. Its composition technology allows URSA offer a Warranty of 25 years. Its soft-touching, it does not generate dust, fire resistant... The acrylic base technology of its binder grants its high performance. Easy to install. Its soft-touching, it does not generate dust, it does not make the skin get irritated,… It has obtain the First Award 2014- 2015 in “Trophées de la Maison”. Best Inner Air Quality. The URSA PUREONE technology has a 0% of emission of COV, optimizing the quality of the inner air.

URSA PUREONE is a mineral wool product used in thermal and acoustic insulation of buildings which offers a high performance and many advantages: High performance. URSA PUREONE offers an excellent thermal and acoustic insulation. Its composition technology allows URSA offer a Warranty of 25 years. Its soft-touching, it does not generate dust, fire resistant... The acrylic base technology of its binder grants its high performance. Easy to install. Its soft-touching, it does not generate dust, it does not make the skin get irritated,… It has obtain the First Award 2014- 2015 in “Trophées de la Maison”. Best Inner Air Quality. The URSA PUREONE technology has a 0% of emission of COV, optimizing the quality of the inner air.

Plafoniera a led integrati, 28W - 3850 Lumen. Trasformatore dimmerabile incluso nella struttura. La struttura è disponibile in diverse finiture: bianco, oro francese, finitura acciaio. Altre finiture sono disponibili su richiesta. Il diffusore in plexiglas è particolarmente luminoso grazie alla micro-puntinatura interna che permette una maggiore diffuzione della luce.

Flechas reglamentarias para indicar sentidos en las vias.

Cebra peatonal paramétrica según mintransporte Colombia.

2D electric symbol with optional text and listing parameters.