Storefront double door with sidelights and transom.

Storefront double door.

Storefront door with sidelights and transom.

Storefront double door with sidelights and transom.

Storefront double door with transom.

Storefront door with transom.

Storefront door.

Modular office partition unit.

Storefront door.

Storefront double door.

Storefront double door with transom.

Storefront door with sidelights and transom.

Storefront door with transom.

Modular office partition unit.

Storefront double door with sidelights and transom.

#http://www.idobathroom.com www.bimlab.fi changelog 01.03.2005 -initial release

The Sikadur Combiflex® SG system includes Sikadur Combiflex® SG tape and Sikadur® adhesives. With improved performance and advanced adhesion properties, it can be directly applied as joint waterproofing or over crack zones preventing leakage occurrence. Common applications include: basements, façade joints, bridges, tunnels, swimming pools, drinking water and groundwater protection, and more. Characteristics and advantages: •Post-applied waterproofing of joints or cracks •Excellent adhesion to different substrates •Resistant to high water pressure •Easy to install and adjust to complicated construction details •Can be applied over original failing material •Joint waterproofing with extreme movements •Crack sealing system •Easy to control and repair •Fully bonded to concrete preventing underflow

Storefront double door with transom.

Storefront door with sidelights and transom.

Storefront door with transom.

Storefront door.

Storefront double door.

Suspended plaster ceilings are usually made of plasterboard. In contrast, Metawell® jointless ceilings consist of aluminium sandwich panels, and because of the aluminium and copper used offer greater performance and a high response speed. The unusually lightweight support panel is very bending-resistant. Therefore, the grid dimension of the substructure can be double that of plasterboard panels. The advantages: greater flexibility with ceiling fixtures and a tighter meander layout. Metawell® panels offer many different edge finishes. They are provided at the butt joints with stop chamfers to ensure a perfectly levelled filling. Thanks to the extraordinarily flat surface, only the joints, not the entire panel area, need to be evened. Up to 110 W/sqm cooling performance (at 10 K under temperature). Additionally the product has an EPD (Environmental Product Declaration).

Sika® FloorJoint PD is a vibration-free, noiseless, prefabricated joint panel made of resin. The installed profile causes no thresholds in the floor surface. Main uses; movement joints in parking decks, commercial buildings and industrial floors. Product specifications: • Ultra flat • Noiseless and vibration-free under traffic • Invisible and can be recoated with Sikafloor flooring systems • Waterproof • Corrosion free, made of resin • Good chemical resistance • High movement capacity • Fast installation

A sprayable fire-rated mastic for construction joints where higher movement is expected

FLEX GLASSLINE are glass walls that provide a tasteful and inspiring work environment where it is easy to concentrate and get work in peace. Glass walls reduce noise and interference. The glazed walls bounding office and conference room without sacrificing transparency, light and community. FLEX GLASSLINE is a wall system with fixed and movable glass panels that can be combined with swing and sliding doors in wood or glass. Our glazed walls have no profiles in the vertical joints between the glass sheets.

Dental panographic and Cephalometric radiographic unit. This is a radiographic system for routine intra-oral examination. This unit shall provide radiographs of the maxillary sinus and the entire jawbone including temporomandibular joints. The unit shall be complete with control panel and mounting hardware.

With its variety of colours, formats and surfaces, KeraTwin® offers the architect an enormous freedom of design. And as diverse fastening alternatives ensure technical and constructional flexibility, this system offers the appropriate solution to every challenge – even on difficult bases. As facade system with the widest variety of colours, KeraTwin® permits every architect to realize its creative ideas. Thus, besides the colour range “SpectraView” developed by the designer Peter Zoernack with nine colour families harmoniously matched to each other and contrasting colours, the colour systems “Natura unglazed”, “Design unglazed” and “Design glazed” are also available. On request, the panels are also supplied with profiles which – due to their three-dimensional structure – can make large facades less monotonous and lend an entire building a distinctive character. The joints are realized in such a way that the construction is optimally protected against driving rain. With their relatively low weight of 32 kg/m², the panels are easy to transport and to install. KeraTwin cermic panels are HT-coated (Hydrophilic tile).

Single-layer ALPA®-modified bituminous waterproofing system exclusively developed by Axter. This waterproofing system is mechanically fixed and lap joints are hot air welded, meaning that no flame is involved in the installation. This means that ALPAL® SECUR provides optimum safety and is particularly recommended for structures within a sensitive environment (factory, service station etc ...), for timber-framed structures and in industrial workshops where pre-fabricated structures are manufactured. ALPAL® SECUR is available as a self-protected waterproofing system or can be used under added protection (gravel) or vegetation.

Seats with precise geometrical design, offered in 3 different versions of the base: - hand-polished stainless steel, - burnished brass, - solid wood. The metal base versions have wooden or lacquered seat/back and cushions available upon request. The version with solid oak wood frame has seat/back in same veneer and cushions for seat and back included, fixed with removable joints.

Proctection & decoration - 100% antibacterial - Multi-application Wall - Wall protection Total protection fitting all areas by providing impact resistance, high level of hygiene and a decorative touch • Unique textured surface hiding impacts and scratches, easy to clean • Resists to 320 kg at 3 km/h impacts • Non-porous 100% antibacterial material suitable for high infection risk areas • Welded joints possible for perfect watertightness between panels or with vinyl flooring • Resists to standard cleaning, disinfection and antiseptic products (Anios and Bioquell test reports)

Weldable - Smooth - Clean room Wall - Wall protection Smooth protection panel for high infection risk areas • Smooth alternative to Decochoc panel • Suitable for high infection risk areas such as operating theter • Welded joints possible for perfect watertightness between panels or with vinyl flooring • Resists to standard cleaning, disinfection and antiseptic products (Anios and Bioquell test reports)

Double function handrail to protect walls from intense traffic and aid mobility[LIST] Impact energy spread thanks to 2 internal ribbing reinforcements Excellent wrenching resistance (CEBTP Solen test) Easy installation thanks to patented mounting system Autoclip Spacer with an adjustable clamp to compensate wall defaults Fight against bacteria: bactericidal joints and antibacterial smooth material[/LIST]

Combination of handrail and wall protection ideally suited for all corridors[LIST] Shock absorption Excellent wrenching resistance (CEBTP Solen test) Fight against bacteria: bactericidal joints and antibacterial smooth material Modularity: 7 accessories, service duct kit[/LIST]

Elegant handrail providing both visual guidance and wall protection[LIST] Excellent wrenching resistance (CEBTP Solen test) Shock absorption thanks to protection band covering the whole surface Modularity: 7 accessories, service duct kit Bactericidal joints and antibacterial smooth material[/LIST]

Handrail with wood effect band to provide both a good grip and a stylish decorative touch in light traffic areas[LIST] Excellent wrenching resistance (CEBTP Solen test) Bactericidal joints and antibacterial smooth material Modularity: 7 accessories, service duct kit 7 wood and 2 trendy finishes available Wood effect on the protection band and on the accessories[/LIST]

PVC-SHEATHED LINEA’TOUCH + (Plus) – 40 mm width Diameter 40 mm Trilobed handrail – Reinforced version Description: The selected handrail (PVC sheathed LINEA’TOUCH + (Plus) as manufactured by Gerflor) is a trilobed handrail with a cross section from 28 to 40 mm to give it an ergonomic and anti-rotation design. It is 42 mm deep and projects 80 or 90 mm from the wall. The axial position of its brackets provides an excellent handhold. It consists of a 5 mm continuous aluminium reinforced profile covered with a 2 mm smooth, antibacterial, solid-colour PVC sheath and a closer underneath. Various accessories (flat or bevelled endcaps, classic or extended and curved wall returns) are available to finish the handrail assembly. All technical solutions are available to ensure continuity around corners (90° or made to measure), in staircases (Rapid’Angle 3-way “universal joints” rotation), across service ducts (Quick-removable assembly wedge) and around curved sections (pre-curved in the factory). These antibacterial PVC accessories connect to the profile with joiner pieces supplied with flexible bactericidal joints. Wall fixing is by 80 mm reinforced aluminium brackets with 2 self-locking attachment points. A protective film is specified to minimise cleaning before acceptance. This handrail achieves Bs2d0 fire-rating and an impact resistance in excess of 110 Joules, i.e., an impact of more than 320 kg travelling at 3 kmh.

Warmth of wood - Better ergonomie - Light traffic Wood effect handrail combining warmth of wood with safety in corridors and stairways[LIST] Provides an excellent grip thanks to its exclusive trilobed shape Warmth of wood without the drawbacks of maintenance and resistance Fight against bacteria thanks to bactericidal joints and antibacterial smooth material Accessories matched with the PVC wood finish profile[/LIST]

Elegant aluminium finish handrail ideal for corridors or stairs[LIST] Provides an excellent grip thanks to its exclusive trilobed shape Fight against bacteria thanks to bactericidal joints and antibacterial smooth material Accessories matched with the profile[/LIST]

Accessibility - 100% antibacterial - Moderate traffic Wall - Handrails Ergonomic handrail providing high quality grip and fitting any building •Modularity: 17 accessories, technical solutions for stairs and service ducts •PVC sheath already installed on the aluminium profile •Closer and accessories matched with the smooth PVC profile •Easy cleaning due to perfect roundness and smooth continuous surface •Fight against bacteria thanks to bactericidal joints and antibacterial smooth material

Warmth of wood - Hygiene - Light traffic Wall - Handrails Wood effect handrail combining warmth of wood with safety in corridors and stairways •Warmth of wood without the drawbacks of maintenance and resistance •Closer and accessories matched with the PVC wood finish profile •Modularity: 17 accessories, technical solutions for stairs and service ducts •Fight against bacteria thanks to bactericidal joints and antibacterial smooth material

Elegance - Hygiene - Light traffic Wall - Handrails Elegant aluminium finish handrail ideal for corridors or stairs •Modularity: 17 accessories, technical solutions for stairs and service ducts •Closer matched with the anodised profile and providing a continuous ‘easy to clean’ surface •Fight against bacteria thanks to bactericidal joints and antibacterial smooth material

Handrail with wood effect band to provide both a good grip and a stylish decorative touch in light traffic areas[LIST] Excellent wrenching resistance (CEBTP Solen test) Bactericidal joints and antibacterial smooth material Modularity: 7 accessories, service duct kit 7 wood and 2 trendy finishes available Wood effect on the protection band and on the accessories[/LIST]

Nipo is a solid wood chair whose form is reminiscent of the stark simplicity of Finnish rustic furniture. Excellent sitting comfort is achieved by gently inclining seat and backrest. The solid wood seat and frame are slightly apart which allows wood to stretch and contract. Every part of the chair’s structure is carefully designed with efficient material utilisation and industrial production in mind. Skilfully manufactured in Finland, the traditional wood joints and structural details enrich the meticulously finished effect. The restrained design makes the chair suitable for church halls and higher end cafés, for instance.

Fermacell Gypsum Fibreboards: - One Man Boards – Square Edge - Standard Boards – Square Edge - Tapered Edge Boards – Tapered On 2 Sides - Tapered Edge Boards – Tapered On 4 Sides Fermacell gypsum fiber boards are made of gypsum and paper fibers obtained by a recycling process. They offer a lot of advantages for the complete "dry" interior design. Areas of application envisaged: - Indoor applications for wall, ceiling and roof       - Building board       - Fire protection plate       - Moisture trays - Indoor applications for floor areas Product advantages: - Interior decoration for a good indoor climate - Suitable for humidification and moisturizing - Soundproofing - Extremely resilient - High stability and statically applicable - Non-flammable - Easy to process and easy to attach - Economical adhesive joints - surface filling If you have any questions concerning application in residential areas or commercial areas, please contact Fermacell's technical advisors.

Fermacell Gypsum Fibreboards: - One Man Boards – Square Edge - Standard Boards – Square Edge - Tapered Edge Boards – Tapered On 2 Sides - Tapered Edge Boards – Tapered On 4 Sides Fermacell gypsum fiber boards are made of gypsum and paper fibers obtained by a recycling process. They offer a lot of advantages for the complete "dry" interior design. Areas of application envisaged: - Indoor applications for wall, ceiling and roof       - Building board       - Fire protection plate       - Moisture trays - Indoor applications for floor areas Product advantages: - Interior decoration for a good indoor climate - Suitable for humidification and moisturizing - Soundproofing - Extremely resilient - High stability and statically applicable - Non-flammable - Easy to process and easy to attach - Economical adhesive joints - surface filling If you have any questions concerning application in residential areas or commercial areas, please contact Fermacell's technical advisors.

Best performance for facade insulation with thin insulation boards: Just 10 cm thick with a Lambda of 0.024 W/mK the Dalmatiner-Fassadendämmplatte S 024 allows to achieve the strict stipulations of the relevant German energy-saving regulation “EnEV 2009”: High insulating performance combined with a slimline wall structure facilitates attractive facade designs.Unattractive small window holes - caused by thick insulation boards to avoid thermal bridges - are quite back numbers. Details of joints to attached elements are easy and cost-efficient to realise due to the slim insulation board.

Negro Lanzarote is the most purely black of La Paloma Cerámicas. Either with clear or dark mortar joints creates in buildings façades an effect of special elegance. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Fermacell Cement Bonded Boards - One Man Boards – Square Edge - Standard Boards – Square Edge - Tapered Edge Boards – Tapered On 2 Sides Fermacell Powerpanel H2O is a cement-bound light-weight construction panel with a sandwich structure and two-layer top layer reinforcement made of alkali-resistant glass lattice fabric. They offer a lot of advantages in highly humid wall and ceiling constructions. Areas of application envisaged: - interior applications for walls and ceilings, such as       - domestic wet rooms (e.g., bathrooms, showers)       - public areas (e.g., swimming pools, sanitation, wellness areas)       - commercial areas (for example, dairies, breweries, large kitchens) - External applications       - Undercover       - Suspended ventilated façade Product advantages: - Predestined for wet areas - Extremely stable and light - Easy to process - Easy to attach - Economical adhesive joints - surface filling For use in highly chemically stressed areas, please contact the technical consultants of Fermacell GmbH.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

<p><strong>ALSAN® 770 </strong>products are high-grade, PMMA-based resins with low-temperature flexibility and are used to create durable and reliable roof waterproofing membranes on balconies, parking, terraces or flat-roof and to waterproof joints on water impermeable concrete with fleece reinforcement.</p>

Jerusalem joints elegance, tradition and technology. It stands for being a handmade brick development with high technical and aesthetical performance, fundamentally influenced by its long dimension and its handmade characteristic. Ancient manufacturing techniques carryed out for centuries, are now present in this brick that La Paloma Cerámicas has offered to the world of architecture. Warmth and beauty have always being part of stonewhare products, this fact is even more appreciable in this brick. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents.

Jerusalem joints elegance, tradition and technology. It stands for being a handmade brick development with high technical and aesthetical performance, fundamentally influenced by its long dimension and its handmade characteristic. Ancient manufacturing techniques carryed out for centuries, are now present in this brick that La Paloma Cerámicas has offered to the world of architecture. Warmth and beauty have always being part of stonewhare products, this fact is even more appreciable in this brick. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents.

Jerusalem joints elegance, tradition and technology. It stands for being a handmade brick development with high technical and aesthetical performance, fundamentally influenced by its long dimension and its handmade characteristic. Ancient manufacturing techniques carryed out for centuries, are now present in this brick that La Paloma Cerámicas has offered to the world of architecture. Warmth and beauty have always being part of stonewhare products, this fact is even more appreciable in this brick. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents.

The burnt caramel hues found in this single-strip floor from the Da Capo Collection are enhanced by the rich smoked effect on the boards resulting in a luxurious colour palette. Knots and cracks pepper the boards, resulting in a beautifully aged effect reminiscent of reclaimed timber. Decorative square joints add to its crafted appearance. Each board is carefully brushed to bring out the character of the grain and highlight the natural texture of the wood. Two-sided bevelling ensures a classic, full plank look and feel. Every board is meticulously hand-scraped, which emphasises the worn complexion of the floor.

The rich toffee stain on this smoked, single-strip floor from the Da Capo Collection gives it its balanced yet rustic expression. Knots and cracks pepper the boards, resulting in a beautifully aged effect reminiscent of reclaimed timber. Decorative butterfly joints add to its crafted complexion. Each board is carefully brushed to bring out the character of the grain and highlight the natural texture of the wood. Two-sided bevelling ensures a classic, full plank look and feel. Every board is meticulously hand-scraped, which emphasises the worn appearance of the floor.

Partition made up of two Pladur® plasterboards screwed onto each side of a free, twin frame of galvanised steel and set apart a variable distance (10 mm minimum). Both structures are built on Pladur® studs (vertical elements) and Pladur® channels (horizontal elements). Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Partition made up of two Pladur® plasterboards screwed on each side to a free, twin frame of galvanised steel and set apart from each other a variable distance (minimum spacing of 10 mm + thickness of the middle plasterboard). Both structures are built on Pladur® studs (vertical elements) and Pladur® channels (horizontal elements). Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Partition made up of two Pladur® plasterboards screwed onto each side of a double, braced structure of galvanised steel and set apart from each other a variable distance (minimum spacing of 10 mm + thickness of the middle plasterboard). Both structures are built on Pladur® studs (vertical elements) and Pladur® channels (horizontal elements). Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Mixed partition made up of two independent Pladur® linings, both braced on each side by a supporting wall (to be determined by the design). The final thickness of the mixed partition is determined by the base wall. Each lining is made up of a structure of profiles of galvanised sheet steel, built on studs (vertical elements and channels (horizontal elements), on whose interior side, according to the free-standing height, the studs will need be braced with brackets attached to the core of the studs and the base wall, leaving a space between the structure and the wall of a minimum of 10 mm. On the exterior side of each lining structure, one or two Pladur® plasterboards are screwed on. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling on the floor and ceiling, etc. Completely finished with Quality Level 1 for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Semi-direct lining made up of a structure of galvanised sheet steel profiles over Pladur® furring fastened directly to the support wall, to whose exterior a Pladur® plasterboard is screwed. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, watertight joints, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4), according to the surface finish (to be determined by the design.) Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Independent lining made up of a structure of galvanised sheet steel profiles over T-47/T-45 profiles vertical elements) and Clip U track (horizontal elements), on whose interior side, the profiles need to be braced using standard reach brackets, leaving a space between the structure and the wall of a minimum of 10 mm. On the exterior side of this structure, one or more Pladur® plasterboards are screwed on. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, watertight/acoustic perimeter joints, etc., as well as anchors for Clip U track, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Independent lining made up of a structure of galvanised sheet steel profiles over Pladur® studs and Pladur® channels (horizontal elements), on whose interior side, depending on the height to be covered, the studs must be braced with brackets that attach to the core of the studs and the support wall, leaving a minimum space between the structure and the wall of 10 mm. On the exterior side of this structure one or more Pladur® plasterboards are screwed on. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, watertight/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of the Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Partition made up of a Pladur® plasterboard screwed to each side of a galvanized steel structure, over Pladur® studs (vertical elements) and Pladur® channels (horizontal elements). Commensurate amounts of Pladur® materials: screws, compounds, joint tape, watertight/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of the Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Partition made up of two or more Pladur® plasterboards screwed to each side of a galvanized steel structure, over Pladur® studs (vertical elements) and Pladur® channels (horizontal elements). Commensurate amounts of Pladur® materials: screws, compounds, joint tape, watertight/acoustic perimeter joints, etc., as well as anchors for floor and ceiling channels, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of the Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE

Semi-direct ceiling made up of a frame of galvanised sheet steel profiles over a base of Pladur® metal furring fastened directly to the support, on whose exterior side one or more Pladur® plasterboards are screwed. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient joints, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a frame of galvanised sheet steel profiles over a base of Pladur® T-47/T-45 profiles hung from the framing by means of Pladur® T-47/T-45 clips + Ø 6 mm threaded rod, and supported by Pladur® profiles mechanically attached around the whole perimeter. One or two Pladur® plasterboards are screwed to this frame. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient joints, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a frame of galvanised sheet steel profiles over a base of Pladur® T-47/T-45 profiles or mullions hung from the framing by means of Pladur® standard reach brackets + Ø 6 mm threaded rod, and supported by Pladur® profiles attached mechanically along the whole perimeter. One or two Pladur® plasterboards are screwed to this frame. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient joints, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a frame of galvanised sheet steel profiles over a base of Pladur® TF profiles hung from the framing by means of Pladur® hangers + Ø 6 mm threaded rod, and supported on Pladur® profiles mechanically attached to the whole perimeter. One or two Pladur® plasterboards are screwed to this frame. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient joints, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a frame of galvanised sheet steel profiles over a base of Pladur® T-60 profiles hung from the framing by means of Pladur® T60 clips + Ø 6 mm threaded rod, and supported on Pladur® profiles attached mechanically around the whole perimeter. One or more Pladur® plasterboards are screwed to this frame. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient joints, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a frame of galvanised sheet steel profiles over a base of Pladur® hung from the framing by means of Pladur® hanger brackets + Ø 6 mm threaded rod, and supported on Pladur® channels mechanically attached around the whole perimeter. One or more Pladur® plasterboards are screwed to this frame. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient joints, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Continuous ceiling made up of a unique frame of Pladur® mullions supported on lateral support walls by means of Pladur® channels and attached mechanically around the whole perimeter. A Pladur® plasterboard is screwed onto this frame of profiles, with commensurate amounts of anchors, screws, resilient/acoustic perimeter joints, joint tapes, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Mineral wool over the back of the plasterboards and profiles. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a twin frame of galvanised sheet steel profiles installed at different levels. The primary frame is made up of Pladur® PH-45 hung from the framing by means of Ø 6 mm threaded rod, nut and locking nut. The secondary frame is made up of Pladur® T-47/T-45 profiles fitted perpendicularly to the lower part of the primary frame by fitting directly on the double, die-cut hangers of the Pladur® PH-45 profile and supported around the perimeter on Pladur® angular profiles or U track Clip, which is attached mechanically along its whole length. One or more Pladur® plasterboards are screwed perpendicularly onto the secondary frame. Commensurate amounts of anchors, hangers, hangers, resilient/acoustic perimeter joints, joint compounds and tapes, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design.) Installed according to Pladur® recommendations, UNE 102043 and CTE requirements.

Suspended ceiling made up of a twin frame of galvanised sheet steel profiles installed at different levels (D). The primary frame is made up of Pladur® T-60 profiles hung from the framing by means of Pladur® T-60 hanger brackets and Ø 6 mm threaded rod. The secondary frame is made up of Pladur® T-60 profiles hung from the primary one by means of Pladur® channel intersection connector T-60 and supported around the perimeter with angular profiles o U track, which are attached mechanically around its whole length. One or more Pladur® plasterboards are screwed perpendicularly onto the secondary frame. Commensurate amounts of anchors, hangers, screws, resilient/acoustic perimeter joints, joint compounds and tapes, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a twin, primary and secondary, frame of Pladur® T-60 profiles in a "C" shape by means of the Pladur® H T-60 connection placed at the same level and suspended from the framing by means of Pladur® T-60 hanger brackets and Ø 6 mm threaded rod, supported on angular or U track profiles which are attached mechanically along the whole length. One or more Pladur® plasterboards are screwed perpendicularly onto the secondary frame. Commensurate amounts of anchors, hangers, hangers, screws, resilient/acoustic perimeter joints, joint compounds and tapes, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a twin frame of galvanised sheet steel profiles installed at different levels. The primary frame is made up of Pladur® GL U track with a thickness of 1.5 mm, hung from the framing by means of M-50 hangers and Ø 6 mm threaded rod with nut and locking nut. The second frame is made up of Pladur® T-47 profiles fitted to the primary frame by means of Pladur® channel connectors GL and supported around the perimeter on Pladur® angular profiles and U track Clip, which are attached mechanically along its whole length. One or two Pladur® plasterboards are screwed perpendicular to the secondary frame. Commensurate amounts of anchors, hangers, screws, resilient/acoustic perimeter joints, joint compound, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a frame of galvanised sheet steel profiles over a base of Pladur® T-60 profiles set 300 mm apart, properly hung from the framing by means of Pladur® T-60 hanger brackets + Ø 6 mm threaded rod, and supported on Pladur® profiles attached mechanically around the whole perimeter. Pladur® Fon+ plasterboards are screwed to this frame. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient joints, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a twin frame of galvanised sheet steel profiles installed at different levels (D). The primary frame is made up of Pladur® T-60 profiles hung from the framing by means of Pladur® T-60 hanger brackets and Ø 6 mm threaded rod. The secondary frame is made up of Pladur® T-60 profiles spaced 300 mm apart, hung from the primary frame by means of Pladur® T-60 hanger brackets supported around the perimeter on angular or U track profiles which are attached mechanically along their whole length. Pladur® Fon+ plasterboards are screwed perpendicularly onto the secondary frame. Commensurate amounts of anchors, hangers, hangers, screws, resilient/acoustic perimeter joints, joint compounds and tapes, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Partition made up of two Pladur® plasterboards screwed on each side of a double, braced structure of galvanised steel and spaced a minimum of 10 mm apart. Both structures are built on Pladur® studs (vertical elements) and Pladur® channels (horizontal elements). Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Partition made up of two Pladur® plasterboards screwed on each side to a double, braced structure of galvanised steel and set apart from each other a variable distance (minimum spacing of 10mm). Both structures are built on Pladur® studs (vertical elements) and Pladur® channels (horizontal elements). Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Partition made up of a structure of galvanised sheet steel metal profiles 90 mm wide and 0.7 mm thick, with Pladur® CH-90 studs and Pladur® E-90 studs (vertical elements), spaced 600 mm on centre, and Pladur® J-92 channels (horizontal elements). Toward the inaccessible side (hollow area) a partition face is created enclosing a Pladur® CH plasterboard 25 mm thick with E-90 first and last studs with CH-90 studs in between, having, there being between both materials a continuous band of Pladur® intumescent acoustic sealant On the accessible side of this partition, one or more 15mm thick Pladur® F plasterboards are screwed on. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design) except on the inaccessible side of the system. Core of each Pladur>® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements

Partition made up of a structure of galvanised sheet steel metal profiles 90 mm wide and 0.7 mm thick, with Pladur® CH-90 studs and Pladur® E-90 studs (vertical elements), spaced 600 mm on centre, and Pladur® J-92 channels (horizontal elements). Toward the inaccessible side (hollow area) a partition face is created enclosing a Pladur® CH plasterboard 25 mm thick with E-90 first and last studs and CH-90 studs in between, having a continuous band of Pladur® intumescent acoustic sealant between both materials. On the accessible side of this partition, one or more 15mm thick Pladur® F plasterboards are screwed on, including joint treatment. Afterwards a self-bearing lining is applied, consisting of a structure of profiles of galvanized steel sheet metal on Pladur® studs and channels (horizontal elements), on whose interior side, depending on the height to be covered, the studs must be braced with angular pieces that are attached to the core of the studs and the Pladur® CH partition, leaving a space between the structure and the partition of a minimum of 10 mm. On the exterior side of this structure one or more Pladur® plasterboards are screwed on. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc., with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), except on the inaccessible side of the system. Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Mixed partition made up of two independent Pladur® linings, both braced on each side by a Pladur® partition wall. Each partition is made up of a structure of galvanised sheet steel profiles, built on studs (vertical elements) and channels (horizontal elements), on whose interior side, depending on the free-standing height, the studs will need be braced with brackets attached to the core of the studs and the Pladur®, partition, leaving a space between the structure and the partition base of a minimum of 10 mm. On the exterior of each lining structure, one or two Pladur® plasterboards are screwed on. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on floors and ceilings, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the project). Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Wash trough, fully pressed for wall mount. Wash troughs designed to withstand daily use in schools, kindergartens, sport stadiums and industrial buildings. For increased security several of our models are provided with "bumpers" covering sharp corners. If you do not need bumpers we also supply simpler variations. All our models have centered waste holes and is delivered in fully pressed stainless steel and are without unhygienic joints.

Wash trough, fully pressed, in stainless steel. Wash troughs designed to withstand daily use in schools, kindergartens, sport stadiums and industrial buildings. For increased security several of our models are provided with "bumpers" covering sharp corners. If you do not need bumpers we also supply simpler variations. All our models have centered waste holes and is delivered in fully pressed stainless steel and are without unhygienic joints.

P12NFOL is a fully pressed stainless steel washing trough for insertion into boards. The sink is designed to be mounted over cabinets which utilise space under the washing trough. Supplied with overflow and 1 1/2” effluent valve with dome grate. Cabinet solution under the sink not included. Wash troughs designed to withstand daily use in schools, kindergartens, sport stadiums and industrial buildings. For increased security several of our models are provided with "bumpers" covering sharp corners. If you do not need bumpers we also supply simpler variations. All our models have centered waste holes and is delivered in fully pressed stainless steel and are without unhygienic joints.

Wash trough, fully pressed, in stainless steel. Wash troughs designed to withstand daily use in schools, kindergartens, sport stadiums and industrial buildings. For increased security several of our models are provided with "bumpers" covering sharp corners. If you do not need bumpers we also supply simpler variations. All our models have centered waste holes and is delivered in fully pressed stainless steel and are without unhygienic joints.

Highlight your windows with monolitics sills. The insulated monolithic sills allow to treat the sills on large dimensions without joints. They are available in 3 colors: orange red, champagne, anthracite, to adapt perfectly to any style: modern or traditional.

Highlight your windows with monolitics sills. The insulated monolithic sills allow to treat the sills on large dimensions without joints. They are available in 3 colors: orange red, champagne, anthracite, to adapt perfectly to any style: modern or traditional.

High thermo-acoustic performance structural floor or roof with Jendy JOSS® system with metal frames, upper covering OSB panels and insulation in rock wool, for a total thickness of 237mm. The structure consists of a frame of galvanized steel, 1.5 mm thick section 50-200-50mm places to 400mm wheelbase; thickness, pitch and height of the profiles as resulting from specific structural calculations. The profiles are secured with vertical warping brackets or inserted within the 40-200-40mm section guides. The top surface of the floor will be covered with a double layer of OSB 3 sheets, normate for static functions and the bracing of the horizontal plane, 12mm thick, screwed to the metal with screws VT4.2*32 galvanized and drilling, crossed and with staggered joints cutlery. The floor lower side will instead be coated with a plasterboard plate of 13mm thickness and 2800-3000x1200mm size screwed to the steel structure with suitable self-threading screws fosfate VT3.5*25. The plasterboard will be finished as a rule with plastering of gypsum-based joint with interposed retina or microperforated tape, plastering of the head of the screws, angles, etc ... In the gap will be inserted one of high density rock wool of 160mm thick 70 kg/m³ with acoustic insulation function. In case of roof will be placed on the upper side a further insulating layer to achieve the desired thermal values ​​and suitable waterproofing of the surface; if it’s an intermediate floor it must be realized the screed plant, possibly dry, with traditional subflooring pad and subsequent paving as usual. Including static design of the floor, exclude the reviewing of the existing part. Vacuum computation for full under 5mq.

WALL SANDWICH PANELS WITH MINERAL WOOL CORE WITH CONCEALED FASTENING BALEXTHERM-MW-W-PLUS FEATURES: [LIST] FIRESTOP – high fire resistance properties; unique, two sided shaping of panel and lock joint high fire resistance properties: they may be used as fire partitions high thermal insulation properties – tightly fitted panel connections easy assembly-inclination of internal joint surface, longitudinal slot faciltating the positioning of fastening joints SUPERIOR GASKET – the panels provide a maximum increase in tightness and shorter assembly time, thanks to the option of applying a gasket in the lock joint in production, on the internal side or on both sides. high durability: special line prefabricated mineral wool core highly durable anti-corrosion layers – appropriate lining shape profiling technology aesthetic appearance of the facade – concealed structural connection; a very wide range of external lining profiles and colours [/LIST]

Constructive solution with photocatalytic activity (decontamination) for ultra-resistant asphalt pavements. i.active CARGO is a cementitious mix based on the TX Active® technology and admixtures, specifically designed for achieving bituminous pavements with high mechanical performance and activated by photocatalysis, the product shows depolluting properties, helping to reduce the air pollution/contamination. i.active CARGO is mixed with water, obtaining a self-percolating slurry, to fill open graded asphalts to obtain semi-rigid pavements. Thanks to the special formulation of this smooth and high-flow grout, you can obtain pavements with high punching shear resistance, through percolation in open graded asphalts where the interconnected void content varies from 18 to 22%, even up to 30%. i.active CARGO can be easily pumped and percolated can penetrate the full layer depth of asphalt with a high void content without the need for mechanical vibration. No construction joints are required to control shrinkage. The combination "open graded asphalt + i.active CARGO" allows obtaining monolithic floors with the same characteristics and roading comfort as bituminous asphalt and, in addition, compressive strength of a concrete pavement, an ultraresistant pavement. It also provides high chemical resistance, e.g. to solvents and hydrocarbons.

Constructive solution for ultra-resistant asphalt pavements. i.tech CARGO is a cementitious mix based, specifically designed for achieving bituminous pavements with high mechanical performance. It is mixed with water, obtaining a self-percolating slurry, to fill open graded asphalts to obtain semi-rigid pavements. Thanks to the special formulation of this smooth and high-flow grout, you can obtain pavements with high punching shear resistance, through percolation in open graded asphalts where the interconnected void content varies from 18 to 22%, even up to 30%. i.tech CARGO can be easily pumped and percolated can penetrate the full layer depth of asphalt with a high void content without the need for mechanical vibration. No construction joints are required to control shrinkage. The combination "open graded asphalt + i.tech CARGO" allows obtaining monolithic floors with the same characteristics and road comfort as bituminous asphalt and, in addition, compressive strength of a concrete pavement, an ultraresistant pavement. It also provides high chemical resistance, e.g. to solvents and hydrocarbons.

KNAUF Therm Pro Facade/Roof/Floor EPS 70 λ 38 polystyrene panels are designated by the following code according to PN-EN standard EN 13163:2012+A1:2015 EPS EN 13163 T(1)-L(2)-W(2)-S(2)-P(5)-BS115-CS(10)70-DS(N)2-DS(70,-)1-TR100 KNAUF Therm Pro Facade/Roof/Floor EPS 70 λ 38 insulation panels are manufactured according to the double polystyrene foaming method, thanks to which they have very good functional properties besides excellent insulating properties. These panels are intended for broad applications in thermal insulation of floors and roofs in buildings both old and new. Panels are manufactured in versions with or without a seam. KNAUF Therm Pro Facade/Roof/Floor EPS 70 λ 38 polystyrene panels are manufactured according to European standard EN 13163:2012+A1:2015, and their basic application is: [LIST] exterior thermal insulation made using the "light wet" (BSO) method exterior thermal insulation made using the "light dry" method Thermal insulation on skeleton wall surface filling of expansion joints thermal insulation in closed gap of tri-layer wall thermal insulation in ventilated gap of tri-layer wall thermal insulation of tie beams, lintels and other thermal bridges thermal insulation of balcony loggias thermal insulation of window reveals and lintels thermal insulation of floors under floor underlayer thermal insulation of full and ventilated flat roofs as layered panels for walls and roofs with building paper linings thermal insulation of floors in water floor heating systems. [/LIST]

Piterak® Slim is a large size terracotta rainscreen cladding with overlapping horizontal joints. It is installed with clips fixed on vertical profiles. Piterak® Slim is tough, rated Q4 for impact resistance and versatile with large range of colours standards or glazed and custom shape possibilities.

Piterak® Slim is a large size terracotta rainscreen cladding with overlapping horizontal joints. It is installed with clips fixed on vertical profiles. Piterak® Slim is tough, rated Q4 for impact resistance and versatile with large range of colours standards or glazed and custom shape possibilities.

Piterak® Slim is a large size terracotta rainscreen cladding with overlapping horizontal joints. It is installed with clips fixed on vertical profiles. Piterak® Slim is tough, rated Q4 for impact resistance and versatile with large range of colours standards or glazed and custom shape possibilities.

Piterak® Slim is a large size terracotta rainscreen cladding with overlapping horizontal joints. It is installed with clips fixed on vertical profiles. Piterak® Slim is tough, rated Q4 for impact resistance and versatile with large range of colours standards or glazed and custom shape possibilities.

Piterak® Slim is a large size terracotta rainscreen cladding with overlapping horizontal joints. It is installed with clips fixed on vertical profiles. Piterak® Slim is tough, rated Q4 for impact resistance and versatile with large range of colours standards or glazed and custom shape possibilities.

Piterak® Slim is a large size terracotta rainscreen cladding with overlapping horizontal joints. It is installed with clips fixed on vertical profiles. Piterak® Slim is tough, rated Q4 for impact resistance and versatile with large range of colours standards or glazed and custom shape possibilities.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Carat Base panel: Integrally colored Top layer: Translucent lightly pigmented Standard colors: 27 Carat panels are integrally colored with a transparent lightly pigmented acrylic top finish shade in shade. The unique natural look and the timeless beauty of the monolithic material with its delicate vein texture provide an exciting and noble expression to every building.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Carat HR Base panel: Integrally colored Top layer: Translucent lightly pigmented Standard colors: 27 This special surface treatment offers an increased scratch resistance and a higher UV resistance. Furthermore, most graffiti can be removed using acetone. Generally the aspect resembles the Carat finish, whereas HR panels have a slight sheen to the surface. Carat and HR panels can be used on the same elevation, if possible with a separation between them.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Carat F Base panel: Integrally colored Top layer: Opaque Standard colors: 27 Providing a slightly unsmooth surface, the thicker coating with opaque pigmentation of this acrylic finish allows vibrant colors. It also provides an increased protection against weathering and UV radiation. Available on request in all standard Carat colors and as custom shades.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Avera Base panel: Integrally colored Top layer: Translucent Standard colors: 9 Avera are solid-colored fiber cement panels with a vibrant texture never seen before. The unique look is characterized by the specifically coordinated dynamic manufacturing process. The resulting natural variation in color tonality and perspective even between the panels expressively emphasizes the authenticity of the material. Avera gives a façade a unique vibrancy. A high-quality invisible coating provides the Avera panels with years of protection from weather effects and lets the original look and texture shine through. The special coating also shows strong scratch resistance and offers lasting defense against most graffiti.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Incora Base panel: Integrally colored Top layer: Translucent Standard colors: 2 The innovative Incora façade panel stands out through a vivid spreading pattern, generated through granulated marble.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Reflex Base panel: Integrally colored Top layer: Iridescent Standard colors: 12 These panels are directional, mostly integrally colored and have an iridescent surface coating which is purely acrylic. Changing lighting and angles of vision produce amazing nuances in color shades. For cutting and installation manufacturing direction of sheets is to respect.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Nobilis Base panel: Grey based Top layer: Translucent lightly pigmented Standard colors: 17 The semi-translucent surface coating on a pure acrylic basis provides the classic fiber cement appeal with much visual depth to it. For availability in HR-Coating refer to our delivery program.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Nobilis Base panel: Grey based Top layer: Translucent lightly pigmented Standard colors: 17 The semi-translucent surface coating on a pure acrylic basis provides the classic fiber cement appeal with much visual depth to it. For availability in HR-Coating refer to our delivery program.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Zenor Base panel: Resemble to the surface coating Top layer: Opaque Standard colors: 15 Fiber cement panels, with smooth opaque surface coating that resembles the base panel color.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Carat Base panel: Integrally colored Top layer: Translucent lightly pigmented Standard colors: 27 Carat panels are integrally colored with a transparent lightly pigmented acrylic top finish shade in shade. The unique natural look and the timeless beauty of the monolithic material with its delicate vein texture provide an exciting and noble expression to every building.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Carat HR Base panel: Integrally colored Top layer: Translucent lightly pigmented Standard colors: 27 This special surface treatment offers an increased scratch resistance and a higher UV resistance. Furthermore, most graffiti can be removed using acetone. Generally the aspect resembles the Carat finish, whereas HR panels have a slight sheen to the surface. Carat and HR panels can be used on the same elevation, if possible with a separation between them.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Carat F Base panel: Integrally colored Top layer: Opaque Standard colors: 27 Providing a slightly unsmooth surface, the thicker coating with opaque pigmentation of this acrylic finish allows vibrant colors. It also provides an increased protection against weathering and UV radiation. Available on request in all standard Carat colors and as custom shades.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Avera Base panel: Integrally colored Top layer: Translucent Standard colors: 9 Avera are solid-colored fiber cement panels with a vibrant texture never seen before. The unique look is characterized by the specifically coordinated dynamic manufacturing process. The resulting natural variation in color tonality and perspective even between the panels expressively emphasizes the authenticity of the material. Avera gives a façade a unique vibrancy. A high-quality invisible coating provides the Avera panels with years of protection from weather effects and lets the original look and texture shine through. The special coating also shows strong scratch resistance and offers lasting defense against most graffiti.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Incora Base panel: Integrally colored Top layer: Translucent Standard colors: 2 The innovative Incora façade panel stands out through a vivid spreading pattern, generated through granulated marble.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Reflex Base panel: Integrally colored Top layer: Iridescent Standard colors: 12 These panels are directional, mostly integrally colored and have an iridescent surface coating which is purely acrylic. Changing lighting and angles of vision produce amazing nuances in color shades. For cutting and installation manufacturing direction of sheets is to respect.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Nobilis Base panel: Grey based Top layer: Translucent lightly pigmented Standard colors: 17 The semi-translucent surface coating on a pure acrylic basis provides the classic fiber cement appeal with much visual depth to it. For availability in HR-Coating refer to our delivery program.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Nobilis Base panel: Grey based Top layer: Translucent lightly pigmented Standard colors: 17 The semi-translucent surface coating on a pure acrylic basis provides the classic fiber cement appeal with much visual depth to it. For availability in HR-Coating refer to our delivery program.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Zenor Base panel: Resemble to the surface coating Top layer: Opaque Standard colors: 15 Fiber cement panels, with smooth opaque surface coating that resembles the base panel color.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Carat Base panel: Integrally colored Top layer: Translucent lightly pigmented Standard colors: 27 Carat panels are integrally colored with a transparent lightly pigmented acrylic top finish shade in shade. The unique natural look and the timeless beauty of the monolithic material with its delicate vein texture provide an exciting and noble expression to every building.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Carat HR Base panel: Integrally colored Top layer: Translucent lightly pigmented Standard colors: 27 This special surface treatment offers an increased scratch resistance and a higher UV resistance. Furthermore, most graffiti can be removed using acetone. Generally the aspect resembles the Carat finish, whereas HR panels have a slight sheen to the surface. Carat and HR panels can be used on the same elevation, if possible with a separation between them.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Carat F Base panel: Integrally colored Top layer: Opaque Standard colors: 27 Providing a slightly unsmooth surface, the thicker coating with opaque pigmentation of this acrylic finish allows vibrant colors. It also provides an increased protection against weathering and UV radiation. Available on request in all standard Carat colors and as custom shades.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Avera Base panel: Integrally colored Top layer: Translucent Standard colors: 9 Avera are solid-colored fiber cement panels with a vibrant texture never seen before. The unique look is characterized by the specifically coordinated dynamic manufacturing process. The resulting natural variation in color tonality and perspective even between the panels expressively emphasizes the authenticity of the material. Avera gives a façade a unique vibrancy. A high-quality invisible coating provides the Avera panels with years of protection from weather effects and lets the original look and texture shine through. The special coating also shows strong scratch resistance and offers lasting defense against most graffiti.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Reflex Base panel: Integrally colored Top layer: Iridescent Standard colors: 12 These panels are directional, mostly integrally colored and have an iridescent surface coating which is purely acrylic. Changing lighting and angles of vision produce amazing nuances in color shades. For cutting and installation manufacturing direction of sheets is to respect.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Nobilis Base panel: Grey based Top layer: Translucent lightly pigmented Standard colors: 17 The semi-translucent surface coating on a pure acrylic basis provides the classic fiber cement appeal with much visual depth to it. For availability in HR-Coating refer to our delivery program.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Nobilis Base panel: Grey based Top layer: Translucent lightly pigmented Standard colors: 17 The semi-translucent surface coating on a pure acrylic basis provides the classic fiber cement appeal with much visual depth to it. For availability in HR-Coating refer to our delivery program.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Carat Base panel: Integrally colored Top layer: Translucent lightly pigmented Standard colors: 27 Carat panels are integrally colored with a transparent lightly pigmented acrylic top finish shade in shade. The unique natural look and the timeless beauty of the monolithic material with its delicate vein texture provide an exciting and noble expression to every building.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Carat HR Base panel: Integrally colored Top layer: Translucent lightly pigmented Standard colors: 27 This special surface treatment offers an increased scratch resistance and a higher UV resistance. Furthermore, most graffiti can be removed using acetone. Generally the aspect resembles the Carat finish, whereas HR panels have a slight sheen to the surface. Carat and HR panels can be used on the same elevation, if possible with a separation between them.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Carat F Base panel: Integrally colored Top layer: Opaque Standard colors: 27 Providing a slightly unsmooth surface, the thicker coating with opaque pigmentation of this acrylic finish allows vibrant colors. It also provides an increased protection against weathering and UV radiation. Available on request in all standard Carat colors and as custom shades.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Avera Base panel: Integrally colored Top layer: Translucent Standard colors: 9 Avera are solid-colored fiber cement panels with a vibrant texture never seen before. The unique look is characterized by the specifically coordinated dynamic manufacturing process. The resulting natural variation in color tonality and perspective even between the panels expressively emphasizes the authenticity of the material. Avera gives a façade a unique vibrancy. A high-quality invisible coating provides the Avera panels with years of protection from weather effects and lets the original look and texture shine through. The special coating also shows strong scratch resistance and offers lasting defense against most graffiti.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Reflex Base panel: Integrally colored Top layer: Iridescent Standard colors: 12 These panels are directional, mostly integrally colored and have an iridescent surface coating which is purely acrylic. Changing lighting and angles of vision produce amazing nuances in color shades. For cutting and installation manufacturing direction of sheets is to respect.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Nobilis Base panel: Grey based Top layer: Translucent lightly pigmented Standard colors: 17 The semi-translucent surface coating on a pure acrylic basis provides the classic fiber cement appeal with much visual depth to it. For availability in HR-Coating refer to our delivery program.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Nobilis Base panel: Grey based Top layer: Translucent lightly pigmented Standard colors: 17 The semi-translucent surface coating on a pure acrylic basis provides the classic fiber cement appeal with much visual depth to it. For availability in HR-Coating refer to our delivery program.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Nobilis Base panel: Grey based Top layer: Translucent lightly pigmented Standard colors: 17 The semi-translucent surface coating on a pure acrylic basis provides the classic fiber cement appeal with much visual depth to it. For availability in HR-Coating refer to our delivery program.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Nobilis Base panel: Grey based Top layer: Translucent lightly pigmented Standard colors: 17 The semi-translucent surface coating on a pure acrylic basis provides the classic fiber cement appeal with much visual depth to it. For availability in HR-Coating refer to our delivery program.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Carat Base panel: Integrally colored Top layer: Translucent lightly pigmented Standard colors: 27 Carat panels are integrally colored with a transparent lightly pigmented acrylic top finish shade in shade. The unique natural look and the timeless beauty of the monolithic material with its delicate vein texture provide an exciting and noble expression to every building.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Carat HR Base panel: Integrally colored Top layer: Translucent lightly pigmented Standard colors: 27 This special surface treatment offers an increased scratch resistance and a higher UV resistance. Furthermore, most graffiti can be removed using acetone. Generally the aspect resembles the Carat finish, whereas HR panels have a slight sheen to the surface. Carat and HR panels can be used on the same elevation, if possible with a separation between them.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Carat F Base panel: Integrally colored Top layer: Opaque Standard colors: 27 Providing a slightly unsmooth surface, the thicker coating with opaque pigmentation of this acrylic finish allows vibrant colors. It also provides an increased protection against weathering and UV radiation. Available on request in all standard Carat colors and as custom shades.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Nobilis Base panel: Grey based Top layer: Translucent lightly pigmented Standard colors: 17 The semi-translucent surface coating on a pure acrylic basis provides the classic fiber cement appeal with much visual depth to it. For availability in HR-Coating refer to our delivery program.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Nobilis Base panel: Grey based Top layer: Translucent lightly pigmented Standard colors: 17 The semi-translucent surface coating on a pure acrylic basis provides the classic fiber cement appeal with much visual depth to it. For availability in HR-Coating refer to our delivery program.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Carat Base panel: Integrally colored Top layer: Translucent lightly pigmented Standard colors: 27 Carat panels are integrally colored with a transparent lightly pigmented acrylic top finish shade in shade. The unique natural look and the timeless beauty of the monolithic material with its delicate vein texture provide an exciting and noble expression to every building.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Carat HR Base panel: Integrally colored Top layer: Translucent lightly pigmented Standard colors: 27 This special surface treatment offers an increased scratch resistance and a higher UV resistance. Furthermore, most graffiti can be removed using acetone. Generally the aspect resembles the Carat finish, whereas HR panels have a slight sheen to the surface. Carat and HR panels can be used on the same elevation, if possible with a separation between them.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Carat F Base panel: Integrally colored Top layer: Opaque Standard colors: 27 Providing a slightly unsmooth surface, the thicker coating with opaque pigmentation of this acrylic finish allows vibrant colors. It also provides an increased protection against weathering and UV radiation. Available on request in all standard Carat colors and as custom shades.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Nobilis Base panel: Grey based Top layer: Translucent lightly pigmented Standard colors: 17 The semi-translucent surface coating on a pure acrylic basis provides the classic fiber cement appeal with much visual depth to it. For availability in HR-Coating refer to our delivery program.

Swisspearl large size panels Freedom of design without limits The large-format Swisspearl panels give façades what they need: a face, individuality, character, texture, color and, very importantly, a highly effective protective layer. Swisspearl allows an immense range of possibilities for the design of façades, with an extensive selection of surface options, various types of joints and fastenings, and panel formats that can be freely selected within the maximum useable size. For visible creativity and to meet the highest aesthetic requirements, in proven Swisspearl quality. Nobilis Base panel: Grey based Top layer: Translucent lightly pigmented Standard colors: 17 The semi-translucent surface coating on a pure acrylic basis provides the classic fiber cement appeal with much visual depth to it. For availability in HR-Coating refer to our delivery program.

<p>The MB-SR50N HI+ mullion and transom façade system has been designed to construct lightweight curtain walls of a hanging and filling type as well as roofs, skylights and other spatial constructions.</p> <p>This system allows façades to be constructed with visible narrow dividing lines while ensuring the durability and strength of the structure. The wide offer of profiles enables the architects and designers to realise even the most enterprising ideas for aluminium and glass structures.<br>To obtain the optimum thermal and acoustic insulation and facilitate mounting in the MB-SR50N HI+ system façade, the PE insulator was used, as it provides a very good thermal insulation (Uf from 0.7 W/m2K) and its shape ensures proper screw driving when glazing the façade.</p> <p>As regards the opening elements in “HI”-type façades with improved thermal insulation, the use of windows and doors with improved thermal insulation in MB-86 Aero system is especially recommended.</p> <p>Features that affect the functionality and aesthetics of MB-SR50N HI+ façades:</p> <ul><li>mullions and transoms with “sharp” edges allowing the construction of a curtain wall supporting structures with the appearance of a uniform truss</li><li>angle joints enabling the free shaping of aluminium structures</li><li>aesthetic curtain wall varieties and a number of lining profiles of various shapes providing multiple curtain wall appearances</li><li>a large choice of curtain wall opening elements: windows and doors of various types, including skylight windows and windows integrated with the curtain wall, as well as tilt and parallel opening MB-SR50N OW windows</li><li>a wide glazing range (also two- and three-chamber) with the availability of insulators and accessories allowing a high level of curtain wall thermal insulation</li></ul><p></p>

<p>GTI EL5 CONTROL is a multi-layered looselay vinyl tile, 6 mm thick, reinforced with 2 glass fibre grids</p> <p>GTI EL5 CONTROL is available in square format with welded joints for clean environments and watertight systems requirements.</p> <p>GTI EL5 CONTROL wearlayer is 2 mm vinyl homogeneous manufactured with continuous high pressure process, abrasion group P.</p> <p>It complies with EN 649 and offers an outstanding resistance to traffic.</p> <p>This floorcovering is treated with Evercare™ technology: the latest improvements in polyurethane surface treatment obtained by UV laser cross-linking. Evercare™ offers easy maintenance and resistance against staining of chemical products used in healthcare like betadine, eosin or anti-bacterial hand gel; and decontamination protocols.<br>This treatment has excellent maintenance characteristics; it requires no wax for life!</p> <p>The carbon encapsulated granules throughout its full thickness and the conductive backing and conductive surface treatment ensure optimal and consistent conductive properties throughout its full life expectancy. <br>• 5x104 ≤ Rt ≤ 106 according to EN 1081<br>• Rt ≤ 108 according to CEI 61340-4-1</p> <p>It has permanent antistatic properties.<br>• < 2000V according to EN 1815<br>• < 100V according to CEI 61340-4-5</p> <p>The product is non-emissive of volatile organic compounds with < 10 µg/m3 (TVOC after 28 days ISO 16000-6).</p> <p>Complementary finishes: GTI EL5 CONTROL ACCESS (access ramp), GTI EL5 CONTROL CORNER (corner finishes), GTI EL5 CONTROL coving (COVING / COVING CORNER IN et COVING CORNER OUT) and conductive welding rods (GTI EL5 CONTROL WELDING RODS).</p>

GTI MAX CLEANTECH is a multi-layered loose lay vinyl tile with polyurethane treatment (PUR+), 6 mm thick with welded joints, abrasion group T. It is manufactured by GERFLOR using a continuous high pressure process. GTI MAX CLEANTECH wear layer is reinforced by specific oblong fillers that offers an outstanding resistance to traffic. GTI MAX CLEANTECH is reinforced with 2 glass fiber grids on either side of an intermediate pressed homogeneous layer. GTI’s backing is a 4 mm thick black pressed homogeneous sheet, its surface is a colored and reinforced homogeneous sheet 2 mm thick. It is made of 100% controlled recycled materials. It is 100% recyclable and made with up to 80% recycled content.