-
Sign Hot Media
GRAPHISOFT SE | 13433993192D only.
-
Sign Hot Surface
GRAPHISOFT SE | 13433993192D only.
-
Radiator Horiz Bars 16
GRAPHISOFT SE | 1343649851Hot water radiator with horizontal bars. Editable with MEP Modeler.
-
Radiator Horiz Panel 16
GRAPHISOFT SE | 1343649851Hot water radiator with horizontal panels. Editable with MEP Modeler.
-
Radiator Vert Panel 16
GRAPHISOFT SE | 1343649851Hot water radiator with vertical panels. Editable with MEP Modeler.
-
Radiator Panel 17
GRAPHISOFT SE | 1371557723Hot water radiator with horizontal or vertical panels. Editable with MEP Modeler.
-
Sign Hot Media
GRAPHISOFT SE | 13715578952D only.
-
Sign Hot Surface
GRAPHISOFT SE | 13715578952D only.
-
L7300 - Stirrer, Hot Plate, Magnetic
|Magnetic stirrer-hot plate. It has variable stirring speeds of near 1500 RPM, temperatures of up to about 400 degrees centigrade, back up safety thermostat, plate surface of about 49 square inches and Pyroceram glass ceramic top that is corrosion resistant. Used for reagent mixing and heating, preparing culture media, evaporation and distillation procedures.
-
Radiator Horizontal Bars 17
GRAPHISOFT SE | 1371557723Hot water radiator with horizontal bars. Editable with MEP Modeler.
-
MCX SMARTRONIC®
|Mini-sized, electronically controlled instantaneous water heater for energy-efficient and comfortable hot water supply at a handwash basin (3,5 - 6,5 kW). • Touch key control panel or control vai IPad (CLAGE Smart Control) • optionally supplied with or without plug (3,5 kW) • suitable for pre-wall installation • immediately hot water at any time • Energy efficiency class A (from Sept. 2015) • MCX Blue with single-lever washbasin tap • MBX Lumino with touch-free sensor tap
-
MCX BLUE
|Mini-sized, electronically controlled instantaneous water heater with single-lever washbasin tap for energy-efficient and comfortable hot water supply at a handwash basin (3,5 kW). • Touch key control panel or control vai IPad (CLAGE Smart Control) • optionally supplied with or without plug (3,5 kW) • suitable for pre-wall installation • immediately hot water at any time • Energy efficiency class A (from Sept. 2015) • MCX SMARTRONIC® • MBX Lumino with touch-free sensor tap
-
CFX-U FUNKTRONIC MPS®
|Electronically controlled instantaneous water heater in compact size for energy-efficient and comfortable hot water supply at a kitchen sink (11/13,5 kW). • Precise outlet temperatures up to 60°C • Control via remote control (is included in the delivery) or via IPad (CLAGE Smart Control) • suitable for pre-wall installation • immediately hot water at any time • Energy efficiency class A (from Sept. 2015) • CEX-U ELECTRONIC MPS® (with control-panel)
-
CEX-U ELECTRONIC MPS®
|Electronically controlled instantaneous water heater in compact size for energy-efficient and comfortable hot water supply at a kitchen sink (11/13,5 kW). • Precise outlet temperatures up to 60°C • suitable for pre-wall installation • immediately hot water at any time • Energy efficiency class A (from Sept. 2015) • CFX-U FUNKTRONIC MPS® (remote control)
-
DEX ELECTRONIC MPS®
|Electronically controlled instantaneous water heater for energy-efficient and comfortable hot water supply for singlepoint or multipoint use e.g. bath, shower, sink or wash basin (18-27 kW). • Precise outlet temperatures up to 60°C • Control via remote control • display shows the set temperature • suitable for pre-wall installation • Energy efficiency class A (from Sept. 2015) • DSX SERVOTRONIC MPS® (Fully electronically controlled, multifunctional display) • DCX ELECTRONIC MPS® (electronically controlled, with single key control panel)
-
DCX ELECTRONIC MPS®
|Electronically controlled instantaneous water heater for energy-efficient and comfortable hot water supply for singlepoint or multipoint use e.g. bath, shower, sink or wash basin (18-27 kW). • Easy to use single-key-control pannel for the setting of the five possible outlet temperatures of 35 °C, 38 °C, 42 °C, 48 °C and 55 °C • suitable for pre-wall installation • Energy efficiency class A (from Sept. 2015) • DSX SERVOTRONIC MPS® (electronically controlled, multifunctional display) • DEX ELECTRONIC MPS® (electronically controlled, with control panel)
-
MBX Lumino
|Mini-sized, electronically controlled instantaneous water heater with touch-free sensor tap for energy-efficient and comfortable hot water supply at a handwash basin (3,5/ 6,5 kW). • The maximum power of the instantaneous water heater will be set by a lever at the tap • optionally supplied with or without plug (3,5 kW) • suitable for pre-wall installation • immediately hot water at any time • Energy efficiency class A (from Sept. 2015) • MCX Blue with single-lever washbasin tap • MCX SMARTRONIC®
-
DSX SERVOTRONIC MPS®
|Fully electronically controlled instantaneous water heater for energy-efficient and comfortable hot water supply for singlepoint or multipoint use e.g. bath, shower, sink or wash basin (18-27 kW). • Precise outlet temperatures up to 60°C • Control via remote control (is included in the delivery) or via IPad (CLAGE Smart Control) • coloured illuminated multifunctional display shows the set temperature and the energy consumption • suitable for pre-wall installation • Energy efficiency class A (from Sept. 2015) • DEX ELECTRONIC MPS® (electronically controlled, with control panel) • DCX ELECTRONIC MPS® (electronically controlled, with single key control panel)
-
A0911 - Power Supply, Uninterruptable, Rack Mounted
|Uninterruptable Power Supply, Approximately 2200VA/1600W, Rack Mount with extendable Run Time. Unit must incorporate hot user swappable batteries and must have an overload indicator, replace battery indicator, audible alarm, automatic voltage regulation and include Smart Slot card and software. It must use RS232 DB-9 interface for communication. NEMA L5-30P power connector, and (8) NEMA 5-15R outlets.
-
A1195 - Counter, Cleanup, With 2 or 3 Sinks
|Two or three sink cleanup counter. Unit is constructed of type 304 corrosion resistant stainless steel. It consists of three sinks 14"W X 16"H X 10"D, hot and cold water faucet, and pre-rinse spray hose. Equipped with channel reinforced drainboards, and backsplash, and supported by tubular stainless steel legs. Unit is designed for use in control sterile supply decontamination areas
-
K1552 - Brewer, Coffee, Auto, Elect, 3 Burner, Front/Back
|Space saving front to back automatic coffee maker. This unit includes a heating tank, connection for a cold water supply, decanter service with three burners, funnel and a water flow controller. The unit is used for semi-automatic coffee brewing in cafeterias and commercial institutions. The unit automatically shuts off the water flow when enough has passed through to fill the pot. The unit is normally provided plumbed with a hot water faucet to the side for making other hot drinks (tea, cider, cocoa, etc.). The database height dimension does not include the clearance for coffee decanters warming on the upper burners.
-
M3105 - Cabinet, Warming, F/S, 1 Heated Compartment, Elect
|Freestanding, single or double door warming cabinet with 1 compartment. Compartment and exterior walls are made of stainless steel. Thick fiberglass insulation maintains the interior temperature and prevents the exterior surface from becoming too hot. Equipped with a sealing door, thermostatic temperature control, status display, heat indicating light, over temperature protection, alarms and an air circulating fan. Unit may have an optional temperature recorder. Manufacturer recommends using a fused disconnect switch in the electrical power circuit. Cabinet may also be installed in a recess. Designed for heating and storing of solutions and blankets used in patient care areas.
-
M3110 - Cabinet, Warming, F/S, 2 Heated Compartment, Elect
|Freestanding, single or double door warming cabinet with 2 heated compartments. Compartment and exterior walls are made from stainless steel. Thick fiberglass insulation maintains the interior temperature and keeps the exterior from becoming too hot. Equipped with a sealing door, thermostatic temperature control, status display, heat indicating light, over temperature protection, alarms and an air circulating fan. Unit may have an optional temperature recorder. Manufacturer recommends using a fused disconnect switch in the electrical power circuit. Cabinet may also be installed in a recess. Designed for heating and storing solutions and blankets used in patient care areas.
-
M8120 - Therapy Unit, Hydroculator
|Moist Heat Therapy Unit, also referred as a Hydrocollator Heating Unit, are used to apply effective heat to hot packs used in moist heat therapy. Unit is supplied ready for immediate use and requires no special plumbing. Unit features: stainless steel insulated wall, thermostatically controlled, casters ( mobile units only), and standard size Hot Packs. Other unit sizes and accessories (variety of hot packs, tongs, side table rack, etc.) are available.
-
P6500 - Sink, Service, Cast Iron
|Service sink approximately 18" D x 22" W x 20" H which includes a polished chromium-plated combination hot and cold water faucet with integral stops and extended spout. Spout will have a pail hook, 3/4 inch hose coupling thread and shall include a backflow preventer. The faucet will be provided with a top brace and wall fittings for mounting above service sink. Service sink will be made of enameled cast iron. Used throughout the facility in utility rooms for washing and cleaning equipment.
-
P8710 - Utility Center, Plumbing Connection
|Plumbing connection utility center, sometimes referred to as a 'GUY GRAY BOX'. This recessed utility center provides for hot and cold water connections and a drain connection at sink and other equipment locations. The utility center includes cutoff valves for the water connections, a plug seal for the drain and an outside cover to provide an aesthetic appearance when connections are no longer required. This center may be installed in locations where no plumbing fixtures are included in a design as a future flexibility device, saving many dollars for later facility modifications to incorporate sinks as functions change.
-
S2640 - Cleaner, Ultrasonic, Console, DBL CHMBR, CAB, F/S
|A free-standing, cabinet mounted ultrasonic cleaner, rinser and dryer with double stainless steel chambers (minimum sizes 10X24X12). The cleaning chamber includes the following minimum features: power lid, automatic detergent injector, automatic level controls, automatic timer, and switch fill and drain controls. Sonic cleaning energy provided to the chamber by transducers which are powered by a solid-state generator(s) at a frequency of 40 kHz. The rinse/dryer chamber is of the same basic design, size, and construction as the cleaning chamber. However, the chamber has pre-positioned spray nozzles to provide complete rinse and purified-water rinse coverage and thermostatically controlled recirculated forced hot air for drying. Cleaning and rinse/drying chambers are positioned for either right-to-left or left-to-right workflow. Designed for use to clean surgical instruments and other hardware with sonic energy and effectively spray rinse and dry items after sonic cleaning.
-
Crawl space
|ISODRÄN WARM FOUNDATION MOISTURE IS SAFE AND ECONOMIC Crawlspace or crawling space as it is known is a practical zone if it is just designed and built properly. For this type of space to functioning it (?) must be hot. Using the ISODRÄN METHOD you can easily renovate your existing ventilated cold crawl space or build a new moisture-proof warm space. A warm space with ISODRÄN without energy supply is a small step toward less dependence on electricity, but a big step for a healthy building and healthy living.
-
ALPAL® SECUR No-flame waterproofing
|Single-layer ALPA®-modified bituminous waterproofing system exclusively developed by Axter. This waterproofing system is mechanically fixed and lap joints are hot air welded, meaning that no flame is involved in the installation. This means that ALPAL® SECUR provides optimum safety and is particularly recommended for structures within a sensitive environment (factory, service station etc ...), for timber-framed structures and in industrial workshops where pre-fabricated structures are manufactured. ALPAL® SECUR is available as a self-protected waterproofing system or can be used under added protection (gravel) or vegetation.
-
Mural Calypso
|MURAL CALYPSO is a multilayered wall covering in 2m width roll and with a B-s2,d0 fire classification. It is hot welded with CR41 welding rods. It is made of a printed transparent wear layer and a coloured under layer for an easier welding of the product. This layer comprises 20% of recycled products. It does not contain any CMR 1 & 2 component and is 100% compliant with REACH. It is 100% recyclable.
-
Taradouche Elegance SD
|SHOWER SYSTEM ELEGANCE SD is a flexible homogeneous calendered compacted floorcovering available in 2 m sheet, with a non-directional polychrome design, to offer an even colour throughout the thickness. It should be hot welded with a CR 40 welding rod. SHOWER SYSTEM ELEGANCE SD is specifically embossed for wet barefoot traffic and has a group P wear rating.
-
Mural Club
|MURAL CLUB is a homogeneous wall covering in 2m width roll and with a B-s2,d0 fire classification. It is designed to be a permanent wall covering. It is hot welded with CR40 welding rods for better hygiene. It is made of calendered layer with colour throughout the whole thickness for an nicer aspect of the welding. This layer comprises at least 10% of recycled products. It does not contain any CMR 1 & 2 component and is 100% compliant with REACH. It is 100% recyclable. MURAL CLUB benefits from a PUR surface treatment which provided good resistance to chemical products and makes maintenance easier. MURAL CLUB is a homogeneous wall covering in 2m width roll and with a B-s2,d0 fire classification. It is designed to be a permanent wall covering. It is hot welded with CR40 welding rods for better hygiene. It is made of calendered layer with colour throughout the whole thickness for an nicer aspect of the welding. This layer comprises at least 10% of recycled products. It does not contain any CMR 1 & 2 component and is 100% compliant with REACH. It is 100% recyclable. MURAL CLUB benefits from a PUR surface treatment which provided good resistance to chemical products and makes maintenance easier.
-
Mipolam Biostyl
|Mipolam Biostyl™ is a fully flexible compacted floorcovering in sheet, 2m wide, abrasion group T, providing excellent resistance to wear and tear in high traffic areas. Its weight is 2630 gr/sqm. It features a non directional design incorporating coloured transparent chips to ensure an even colour throughout the thickness. This floorcovering is recommended for private and administrative buildings and thanks to its great flexibility it simplifies the installation of bend-up skirting, as well as angles and hot welding procedures. This floorcovering is treated with Evercare™ or the latest improvements in polyurethane surface treatment obtained by UV laser cross-linking. Evercare™ avoids staining of chemical products used in healthcare like betadine, eosin or anti-bacterial hand gel and increases the durability of the flooring. This treatment has excellent maintenance characteristics; it requires no wax for life! Mipolam Biostyl™ contains over 75% sustainable or renewable raw materials. It includes a 100% bio based plasticizer, made of residues from cereals (wheat, corn…) and REACH compliant.
-
Mipolam Ambiance ultra
|Mipolam Ambiance Ultra is an homogeneous flooring with high PVC content pressed in 2m sheets, with a thickness of 2mm and a weight of ≤ 2750g. It offers a non-directional design, colour dyed as a raw mixture to ensure even colours throughout the thickness and a matt finish. Mipolam Ambiance Ultra is recommended for private and administrative buildings and thanks to its great flexibility it simplifies the installation of bend-up skirting, as well as angles and hot welding procedures. Mipolam Ambiance Ultra is treated with Evercare™ or the latest improvements in polyurethane surface treatment obtained by UV laser cross-linking. Evercare™ avoids staining of chemical products used in healthcare like betadine, eosin or anti-bacterial hand gel and increases the durability of the flooring. This treatment has excellent maintenance characteristics; it requires no wax for life!
-
Grandee
|The expansive Grandee hot tub comfortably seats a party of seven, with room for everyone to enjoy state-of-the-art jets, a two-speed jet pump, and two seats with patented Moto-Massage DX jets. It also features advanced innovations like an insulating hinge seal, 100% no-bypass filtration for cleaner water and the soothing BellaFontana® fountain feature.
-
731002 Group thermostatic mixing valve PREMIX COMFORT
|Group thermostatic mixing valve for mixed water distribution from 32 - 42°C: Anti-scalding safety. Regulation of temperature variations. Filters and non-return valves can be accessed from the outside without removing the mechanism. Thermal shock with no specific lever needed (push-button on the control knob). Interchangeable cartridge with automotive cell. High-resistance chrome-plated brass body DZR. Maximum hot water temperature: 85°C. Differential hot water / mixed water: 15°C mini. Pressure differences at the inlets: 1 bar max (0.5 bar recommended). Minimum pressure / maximum: 1 - 10 bar (1 - 5 bar recommended). Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring). Mixed water outlet at the top (purple ring). For bottom outlet: unscrew / place lid at the top and outlet connector at the bottom. Maximum temperature limiter, can be adjusted by the installer. Reduced risk of scalding by limiting temperature at the point-of-use. 55 lpm - M¾" 10-year warranty.
-
731003 Group thermostatic mixing valve PREMIX COMFORT
|Group thermostatic mixing valve for mixed water distribution from 32 - 42°C: Anti-scalding safety. Regulation of temperature variations. Filters and non-return valves can be accessed from the outside without removing the mechanism. Thermal shock with no specific lever needed (push-button on the control knob). Interchangeable cartridge with automotive cell. High-resistance chrome-plated brass body DZR. Maximum hot water temperature: 85°C. Differential hot water / mixed water: 15°C minimum. Pressure differences at the inlets: 1 bar maximum (0.5 bar recommended). Minimum pressure / maximum: 1 - 10 bar (1 - 5 bar recommended). Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring). Mixed water outlet at the top (purple ring). For bottom outlet: unscrew / place lid at the top and outlet connector at the bottom. Maximum temperature limiter, can be adjusted by the installer. Reduced risk of scalding by reducing the temperature at the point-of-use. 90 lpm at 3 bar - M1". 10-year warranty.
-
732012 Thermostatic mixing valve PREMIX NANO
|Thermostatic mixing valve for mixed water distribution: For 1 to 2 tap or 1 shower. Anti-scalding safety: immediate shut-off if hot or cold water supply fails. Temperature pre-set at 38°C, can be adjusted by the installer from 34 - 60°C. Brass body. Non-return valves and filters. KV 7 lpm at 3 bar Minimum flow rate for operation: 3 lpm at 3 bar. Thermal shocks are possible. Nickel-plated body, inlets F⅜" and outlet M⅜". 10-year warranty.
-
732216 Thermostatic mixing valve PREMIX NANO
|Thermostatic mixing valve for mixed water distribution: For 1 to 2 tap or 1 shower. Anti-scalding safety: immediate shut-off if hot or cold water supply fails. Temperature pre-set at 38°C,can be adjusted by the installer 34 - 60°C. Brass body. Filters and non-return valves. KV 7 lpm at 3 bar. Minimum flow rate to operate: 3 lpm. Thermal shocks are possible. Polished chrome body, hot water inlet F⅜", cold water inlet M⅜" and mixed water outlet M⅜". 10-year warranty.
-
H9610 Thermostatic sink mixer SECURITHERM
|Wall-mounted SECURITHERM thermostatic sequential with BIOCLIP removable spout. Supplied with 1 disposable spout made from recyclable Hostaform®, L. 185mm Ø 22mm. Anti-scalding failsafe: hot water shuts off immediately if cold water supply fails. Securitouch thermal insulation prevents burns. No non-return valves on the inlets. Scale-resistant thermostatic sequential cartridge for single control temperature and flow rate adjustment. Cold water temperature adjustable up to 40°C with temperature limiter set at 40°C. Thermal shocks are possible. Body and spout with smooth interiors and low water volume. Flow rate regulated at 7 lpm. Chrome-plated brass body. No manual contact thanks to Hygiene control lever L. 146mm. Mixer with 150mm centres supplied with offset M1/2" M3/4" STOP/PURGE connectors. 10-year warranty.
-
H9632 Thermostatic shower mixer SECURITHERM
|Recessed SECURITHERM single control thermostatic mixer with no non-return valves. Anti-scalding failsafe: hot water supply shuts off immediately if cold water supply fails. Securitouch thermal insulation prevents burns. Temperature control: cold water up to 39°C with maximum temperature limiter set at 39°C. Thermal shocks are possible. Scale-resistant thermostatic sequential cartridge for single control of flow rate and temperature. Flow rate regulated at 9 lpm (mixer only), 6 lpm at 3 bar with shower head. Hygiene control lever L. 100mm. M¾" inlets with integrated filters. To complete with the waterproof recessing housing behind a bright polished stainless steel cover plate 160 x 220mm with adjustable recessing depth from 10 - 30mm (ref. 790BOX). 10-year warranty.
-
H9639 Sequential shower panel SECURITHERM
|SECURITHERM thermostatic sequential shower panel: Epoxy-coated aluminium shower panel for exposed, wall-mounted installation. Top inlets with M1/2" stopcocks. SECURITHERM thermostatic, sequential mixer. Temperature control from cold water up to 39°C. Temperature limiter set at 39°C, can be adjusted. Anti-scalding failsafe: hot water supply shuts off immediately if cold water supply fails. Thermal shocks are possible. Flow rate 6 lpm at 3 bar. Chrome-plated, tamperproof ROUND shower head with scale-resistant nozzle and automatic flow rate regulation. Hygiene lever L. 100mm. Concealed fixings and filters. 10-year warranty.
-
H9741 Thermostatic shower mixer SECURITHERM
|Wall-mounted SECURITHERM dual control thermostatic shower mixer with: Anti-scalding failsafe: hot water shuts off immediately if cold water supply fails. Securitouch thermal insulation to prevent burns. Scale-resistant thermostatic cartridge for temperature adjustment. 1/4-turn ceramic head for flow rate adjustment. Temperature control: 25 - 41°C. Double temperature limiter: first limiter set at 38°C can be overridden, second limiter set at 41°C. Thermal shocks are easy to undertake without removing the control knob or shutting off the cold water. Flow rate regulated at 9 lpm. Chrome-plated brass body and ERGO controls. M1/2" shower outlet. M3/4" inlets with integrated filters and non-return valves. Offset M1/2" M3/4" STOP/PURGE connectors. 10-year warranty.
-
Towel warmers showcase
|This product is only available for the Swedish market. Alterna Towel Warmers are heated either immersion heater and/or with a regulation valve for heating systems. Installing the towel dryer with both the immersion heater and the regulation valve can also be used when the heating system is switched off. This keeps moisture and condensation away even during hot summer days. Alterna Electric towel warmers can be plugged in either with a fixed connection or with a socket plug.
-
ASSA ABLOY DL6020TI teledock isodock
|The ASSA ABLOY 6020TI Teledock Isodock from ASSA ABLOY Entrance Systems has a special telescopic lip dock leveller who brings energy savings for cold storage. Unlike conventional docking systems, the ASSA ABLOY DL6020TI Teledock Isodock leveller is placed behind a well insulated sectional door. It is also hermetically sealed off from below, preventing cold or hot air access. Crawford
-
MWN130 40 Nubis Propeller Water Meter (Woltman) with Horizontal Rotor Axis
|For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).
-
MWN130 40 -NK; -NKP Nubis Propeller Water Meter (Woltman) with Horizontal Rotor Axis
|For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).
-
MWN130 50 Nubis Propeller Water Meter (Woltman) with Horizontal Rotor Axis
|For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).
-
MWN130 50-G Nubis Propeller Water Meter (Woltman) with Horizontal Rotor Axis
|For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).
-
MWN130 50 -NK; -NKP Nubis Propeller Water Meter (Woltman) with Horizontal Rotor Axis
|For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).
-
MWN130 50-G -NK; -NKP Nubis Propeller Water Meter (Woltman) with Horizontal Rotor Axis
|For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).
-
MWN130 65 Nubis Propeller Water Meter (Woltman) with Horizontal Rotor Axis
|For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).
-
MWN130 65 -NK; -NKP Nubis Propeller Water Meter (Woltman) with Horizontal Rotor Axis
|For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).
-
MWN130 80 Nubis Propeller Water Meter (Woltman) with Horizontal Rotor Axis
|For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).
-
MWN130 80 -NK; -NKP Nubis Propeller Water Meter (Woltman) with Horizontal Rotor Axis
|For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).
-
MWN130 100 Nubis Propeller Water Meter (Woltman) with Horizontal Rotor Axis
|For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).
-
MWN130 100 -NK; -NKP Nubis Propeller Water Meter (Woltman) with Horizontal Rotor Axis
|For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).
-
MWN130 125 Nubis Propeller Water Meter (Woltman) with Horizontal Rotor Axis
|For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).
-
MWN130 125 -NK; -NKP Nubis Propeller Water Meter (Woltman) with Horizontal Rotor Axis
|For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).
-
MWN130 150 Nubis Propeller Water Meter (Woltman) with Horizontal Rotor Axis
|For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).
-
MWN130 150 -NK; -NKP Nubis Propeller Water Meter (Woltman) with Horizontal Rotor Axis
|For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).
-
MWN130 200 Nubis Propeller Water Meter (Woltman) with Horizontal Rotor Axis
|For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).
-
MWN130 200 -NK; -NKP Nubis Propeller Water Meter (Woltman) with Horizontal Rotor Axis
|For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).
-
MWN130 250 Nubis Propeller Water Meter (Woltman) with Horizontal Rotor Axis
|For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).
-
MWN130 250 -NK; -NKP Nubis Propeller Water Meter (Woltman) with Horizontal Rotor Axis
|For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).
-
MWN130 300 Nubis Propeller Water Meter (Woltman) with Horizontal Rotor Axis
|For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).
-
MWN130 300 -NK; -NKP Nubis Propeller Water Meter (Woltman) with Horizontal Rotor Axis
|For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).
-
14 CM WARMING DRAWER
|<p>Our warming drawers help you to ensure your food is always served on hot plates, just like in the finest restaurants. They are also invaluable for keeping food warm while you’re busy perfecting a particularly tricky sauce or simply entertaining your guests. This KitchenAid warming drawer can hold up to six plates and keep your dishes at a maximum temperature of 85°C for as long as you need. Made from easy-to-clean stainless steel.</p> <p><strong>This appliance also exist in Black Stainless Steel.</strong></p>