Office workstation with rectangular table.

Counter with optional number of basins and taps. Editable with MEP Modeler.

Office workstation with L-shaped table.

2D view of a man or woman in wheelchair with optional 3D.

2D airplane on top, side or front view.

Kitchen cabinet base unit with drawers.

2D bathtub on top, side or front view.

2D bus on top, side or front view.

2D mixer truck on top, side or front view.

2D truck on top, side or front view.

2D front view contour of a walking man with optional planar 3D.

2D WC on top, side or front view.

2D front view contour of a standing woman with optional planar 3D.

Optional number of partition panels.

2D airplane on top, side or front view.

2D basin on top, side or front view, with optional support type and tap.

Different types of 2D bidet on top, side or front view, with optional tap.

Different types of 2D wall-mounted bidet on top, side or front view, with optional tap.

2D bus on top, side, rear or front view.

2D bus on top, side, rear or front view.

2D bus on top, side, rear or front view.

2D bus on top, side, rear or front view.

2D vehicle-mounted concrete pump on top, side or front view.

2D front view contour of a dancing woman with optional planar 3D.

2D double basin on top, side or front view, with optional tap.

2D front view contour of a sitting girl with optional planar 3D.

2D front view contour of a couple with optional planar 3D.

2D helicopter on top, side or front view.

2D front view contour of a child with optional planar 3D.

2D side, front or general view contour of a man on bicycle with optional planar 3D.

2D front view contour of a man with optional planar 3D.

2D front view contour of a man with optional planar 3D.

2D front view contour of a man and dog with optional planar 3D.

3D parametric, Skandiform Pillow 2 with optional\n- bend distance in x, y, z direction\n- plus bend distance in z top\n- side modification\n- upper bending radius front and back\n- lower bending radius\n- edge sharpener

Rail with posts and wires in front of posts.

2D front view contour of a sitting woman with optional planar 3D.

2D front view contour of a skating man with optional planar 3D.

2D front view contour of a standing man with optional planar 3D.

2D front view contour of a standing man with optional planar 3D.

2D truck on top, side or front view.

2D truck on top, side or front view.

2D urinal on top, side or front view.

2D urinal on top, side or front view.

2D front view contour of a couple with optional planar 3D.

2D front view contour of a walking man with optional planar 3D.

2D WC on top, side or front view.

2D WC on top, side or front view.

2D WC on top, side or front view.

2D WC on top, side or front view.

2D front view contour of a standing woman with optional planar 3D.

2D side, front or general view contour of a woman on bicycle with optional planar 3D.

2D front view contour of a woman playing tennis with optional planar 3D.

2D front view contour of a woman with optional planar 3D.

2D front view contour of a person with ball with optional planar 3D.

2D front view contour of a standing man with optional planar 3D.

Kitchen cabinet base unit with drawers.

system wall

Counter with optional number of basins and taps. Editable with MEP Modeler.

Office workstation with L-shaped table.

2D truck on top, side or front view.

system wall

Front display ledge (Lasse Pettersson, Lennart Notman, 2004), is for wall-mounting and comes in lengths of 250, 500, 1000, 1500 and 2000 mm. The ledge for straight (vertical) display comes in 54 mm and 98 mm deep versions; the ledge for sloping display is 54 mm deep. Front ledge comes in solid oak, birch, standard colors and standard stains. Tempered clear glass in height 32 mm (not for sloping ledge), 150 mm (=A5) and 230 mm (=A4) comes as standard. Plexi glass and milky glass, made-to-measure sizes other types of wood, colors and surface treatment are available on request. Dividers in solid wood that slot on top of the glass fronts to divide each shelf into compartments as accessories. Ledges are used for display magazines, leaflets, posters, photos.

Front panel (Skala Design 2005), is a magazine rack, a brochure stand, a mirror, a writing and noticeboard – or a combination of all these functions. You can choose the back of straight or sloping ledge, magnetic whiteboard included some magnets, white glass board, Bulletin Board 2204, covered in any color of fabric Europost from Gabriel and mirror. Standard dimensions are heights 800, 1140, 1550 mm and widths 250, 500, 1000 mm. Special sizes and ther finishes upon request. It is secured to the wall using a metal rail. The ledges in solid wood and back in MDF of veneer in oak, birch and standard colors. Finish clear lacquer. Tempered clear glass in height 32, 150 (=A5) or 230 (=A4) mm as standard and plexiglass upon request. Instead of glass for magnetic whiteboard, glass and notice board you can choose of 15 mm wood end. Accessories: Dividers in solid wood that slot on top of the glass fronts to divide each shelf into compartments.

Vitreous china close-coupled WC with front opening and horizontal outlet

Bathtub made of sanitary acrylic of 4-5 mm for the corner with Corner-panel. With aluminium frame and standard wall fixing elements Charge 000 – without whirl system, without waste and overflow

Medium cabinet, open front, with 2 wooden shelf, Body – lacquered surface veneer with solid wood edges With hidden wall fixation 2 fixed shelves

Tall cabinet with mirror front, door left or right, Body – high-pressure laminate surface (HPL) - water resistant, high impact and scratch resistant Anodised aluminium handle 1 door mirrored inside and outside (soft-close mechanism) 4 glass shelves (adjustable)

Bathtub made of sanitary acrylic of 4-5 mm for the corner with Corner-panel. With aluminium frame and standard wall fixing elements Charge 000 – without whirl system, without waste and overflow

Classic Front is a prefabricated, removable glass wall system for commercial buildings. The wall thickness is 98 mm and the frame is in MDF. Pre fabrication provides quick assembly and easy modification of the wall. Classic Front supports current requirements for noise reduction in an office. The glass is available in different types depending on the noise reduction requirements. The door sctions consists of frames in painted or veneered MDF with dimension 29 x 98 mm. 90 degree glass corners are supplied without vertical corner profiles.

Fire Front is a thin fire-rated glass wall in solid wood frames. The Fire Front is a pre assembled and fire-rated corridor wall with glass panels and door sections in fire class EI30 and EW30. The Fire Front can perfectly be used in combination with our Flush Front wall. Glass: EI30: Contraflam 30, 16 mm. Glass: EW30: Contraflam Light 30, 13 mm. Glass panels or compact wall are available options on top of the door .

FRONTLOCKER BK7001 8-16 bicycles / rack Frontlocker is an easily movable rack, which offers many bicycle places, but takes only a little room

Ideal standard, unilux 170 cm bath panel

Kyreo ceramic floorstanding shower tray, square - 90 x 90 x 8 cm - front drain Ø 9 cm ROBUST: Stable fireclay - no bending when used EXCEPTIONAL LONG LIFE: Vitrified glaze RESISTANT: To chemical agents

Piatti ceramici Connect-Piatto doccia di forma quadrata

Piatti ceramici Connect-Piatto doccia di forma rettangolare

Piatti ceramici Connect-Piatto doccia di forma rettangolare

Piatti ceramici Connect-Piatto doccia di forma rettangolare

Piatti ceramici Connect-Piatto doccia di forma rettangolare

Piatti ceramici Connect-Piatto doccia di forma rettangolare

Fixed front 700 mm. See available shower trays at www.gala.en/platos-ducha

Fixed front 800 mm. See available shower trays at www.gala.en/platos-ducha

Fixed front 900 mm. See available shower trays at www.gala.en/platos-ducha

Fixed front 1000 mm. See available shower trays at www.gala.en/platos-ducha

Fixed front 1100 mm. See available shower trays at www.gala.en/platos-ducha

Fixed front 1200 mm. See available shower trays at www.gala.en/platos-ducha

70 cm. fixed front + 180º folding door 25 cm. (right hand) See available shower trays at www.gala.en/platos-ducha

80 cm. fixed front + 180º folding door 25 cm. (right hand) See available shower trays at www.gala.en/platos-ducha

90 cm. fixed front + 180º folding door 25 cm. (right hand) See available shower trays at www.gala.en/platos-ducha

100 cm. fixed front + 180º folding door 25 cm. (right hand) See available shower trays at www.gala.en/platos-ducha

110 cm. fixed front + 180º folding door 25 cm. (right hand) See available shower trays at www.gala.en/platos-ducha

120 cm. fixed front + 180º folding door 25 cm. (right hand) See available shower trays at www.gala.en/platos-ducha

70 cm. fixed front + 180º folding door 25 cm. (left hand) See available shower trays at www.gala.en/platos-ducha

80 cm. fixed front + 180º folding door 25 cm. (left hand) See available shower trays at www.gala.en/platos-ducha

90 cm. fixed front + 180º folding door 25 cm. (left hand) See available shower trays at www.gala.en/platos-ducha

100 cm. fixed front + 180º folding door 25 cm. (left hand) See available shower trays at www.gala.en/platos-ducha

110 cm. fixed front + 180º folding door 25 cm. (left hand) See available shower trays at www.gala.en/platos-ducha

120 cm. fixed front + 180º folding door 25 cm. (left hand) See available shower trays at www.gala.en/platos-ducha

Klevan F front enclosure 1000 mm. See available shower trays at www.gala.en/platos-ducha

Klevan F front enclosure 1100 mm. See available shower trays at www.gala.en/platos-ducha

Klevan F front enclosure 1200 mm. See available shower trays at www.gala.en/platos-ducha

Klevan F front enclosure 1300 mm. See available shower trays at www.gala.en/platos-ducha

Klevan F front enclosure 1400 mm. See available shower trays at www.gala.en/platos-ducha

Klevan F front enclosure 1500 mm. See available shower trays at www.gala.en/platos-ducha

Klevan F front enclosure 1600 mm. See available shower trays at www.gala.en/platos-ducha

<p>The WC, bidet or urinal are essential elements of different bathroom types. Ponte Giulio offers floor standing and wall-hung WCs which feature either more classic or modern shapes to match any style.<br></p>

LK Universal is a unique system primarily based on our own Swedish manufactured PE-X pipes, plus our P-AL pipes with a common range of PressPex fittings. The system is for both heating and potable (drinking) water applications.

LK Universal is a unique system primarily based on our own Swedish manufactured PE-X pipes, plus our P-AL pipes with a common range of PressPex fittings. The system is for both heating and potable (drinking) water applications.

Front apron 160 cm -

Office workstation with rectangular table.

Optional number of partition panels.

2D view of a man or woman in wheelchair with optional 3D.

TOTO Lavatory Le Muse LW814CJ (2D) FRONT.jpg

2D refrigerator 2 door front view

2D tap front

2D tap front view

2D tap front view

2D tap front view

TOTO avante toilet CW821J-SW821JP front view

#http://www.idobathroom.com www.bimlab.fi changelog 01.05.2009 -series renamed 15.06.2006 -door 60 not available 01.03.2005 -renamed furniture series 01.03.2005 -modifications for skandinavian and russian market 01.11.2003 -info-text handles included 01.11.2003 -ean-code added 93231 01.10.2003 -fixed front adapter arch 01.03.2003 -initial release

2D airplane on top, side or front view.

2D basin on top, side or front view, with optional support type and tap.

2D bathtub on top, side or front view.

Different types of 2D floor mounted and wall-mounted bidets on top, side or front view, with optional tap.

2D bus on top, side or front view.

2D car on top, side, rear or front view.

2D vehicle-mounted concrete pump on top, side or front view.

2D front view contour of a dancing woman with optional planar 3D.

2D double basin on top, side or front view, with optional tap.

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2007 -new door 74 15.06.2006 -door 60 not available 01.03.2005 -renamed furniture series 01.03.2005 -modifications for skandinavian and russian market 01.11.2003 -info-text handles included 01.11.2003 -ean-code added 93231 01.10.2003 -fixed front adapter arch 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 15.06.2006 -door 60 not available 01.03.2005 -renamed furniture series 01.03.2005 -modifications for skandinavian and russian market 01.11.2003 -info-text handles included 01.11.2003 -ean-code added 93231 01.10.2003 -fixed front adapter arch 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2007 -new door 74 15.06.2006 -door 60 not available 01.03.2005 -renamed furniture series 01.03.2005 -modifications for skandinavian and russian market 01.11.2003 -info-text handles included 01.11.2003 -ean-code added 93231 01.10.2003 -fixed front adapter arch 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.05.2009 -new washbasin for 93189 01.03.2005 -renamed furniture series 01.03.2005 -modifications for skandinavian and russian market 01.11.2003 -info-text handles included 01.11.2003 -ean-code added 93231 01.10.2003 -fixed front adapter arch 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 15.06.2006 -door 60 not available 01.03.2005 -renamed furniture series 01.03.2005 -modifications for skandinavian and russian market 01.11.2003 -info-text handles included 01.11.2003 -ean-code added 93231 01.10.2003 -fixed front adapter arch 01.03.2003 -initial release

2D front view contour of a sitting girl with optional planar 3D.

2D front view contour of a couple with optional planar 3D.

2D helicopter on top, side or front view.

#http://www.idobathroom.com www.bimlab.fi changelog 15.06.2006 -door 60 not available 01.03.2005 -renamed furniture series 01.03.2005 -modifications for skandinavian and russian market 01.11.2003 -info-text handles included 01.11.2003 -ean-code added 93231 01.10.2003 -fixed front adapter arch 01.03.2003 -initial release

2D front view contour of a child with optional planar 3D.

2D side, front or general view contour of a man on bicycle with optional planar 3D.

2D front view contour of a man with optional planar 3D.

2D front view contour of a man with optional planar 3D.

2D front view contour of a man and dog with optional planar 3D.

2D mixer truck on top, side or front view.

Rail with posts and wires in front of posts.

2D front view contour of a sitting woman with optional planar 3D.

2D front view contour of a skating man with optional planar 3D.

2D front view contour of a standing man with optional planar 3D.

2D front view contour of a standing man with optional planar 3D.

2D urinal on top, side or front view.

2D front view contour of a couple with optional planar 3D.

2D front view contour of a walking man with optional planar 3D.

2D front view contour of a walking man with optional planar 3D.

2D WC on top, side or front view.

2D WC on top, side or front view.

2D front view contour of a standing woman with optional planar 3D.

2D front view contour of a standing woman with optional planar 3D.

2D side, front or general view contour of a woman on bicycle with optional planar 3D.

2D front view contour of a woman playing tennis with optional planar 3D.

2D front view contour of a woman with optional planar 3D.

2D front view contour of a person with ball with optional planar 3D.

# Holds two System toilet rolls # The lock can be used with or without a key # Seamless dispensing with drop-down roll system and adjustable roll brake # Easy and quick to refill # Can be refilled while the second roll is in use, so tissue is always available # 1360 - 1600 sheets, depending on paper quality # Two versions available: with or without core catcher # Better paper accessibility at the front of the dispenser opening # No searching around inside the dispenser opening for the loose end of the paper roll

# Holds two System toilet rolls # The lock can be used with or without a key # Seamless dispensing with drop-down roll system and adjustable roll brake # Easy and quick to refill # Can be refilled while the second roll is in use, so tissue is always available # 1360 - 1600 sheets, depending on paper quality # Two versions available: with or without core catcher # Better paper accessibility at the front of the dispenser opening # No searching around inside the dispenser opening for the loose end of the paper roll

# Holds two System toilet rolls # The lock can be used with or without a key # Seamless dispensing with drop-down roll system and adjustable roll brake # Easy and quick to refill # Can be refilled while the second roll is in use, so tissue is always available # 1360 - 1600 sheets, depending on paper quality # Two versions available: with or without core catcher # Better paper accessibility at the front of the dispenser opening # No searching around inside the dispenser opening for the loose end of the paper roll

# Holds two System toilet rolls # The lock can be used with or without a key # Seamless dispensing with drop-down roll system and adjustable roll brake # Easy and quick to refill # Can be refilled while the second roll is in use, so tissue is always available # 1360 - 1600 sheets, depending on paper quality # Two versions available: with or without core catcher # Better paper accessibility at the front of the dispenser opening # No searching around inside the dispenser opening for the loose end of the paper roll

Vitreous china wall-hung WC with horizontal outletVitreous china wall-hung WC with horizontal outlet Compatible with: 80123D..4 Access Seat for toilet with front opening 801230..4 Access Seat and cover for toilet with front opening

Bathtub made of SENTEC solid surface material, casted for the right corner, with not removable L-panel left With overflow slot at front side and tap bank at opposite side With aluminium frame and floor fixation With pre-installed overflow and siphon with click-clack function With waste cover made of SENTEC solid surface Charge 616 – without whirl system, with sensor control for illuminated overflow slot Bathtub with whirl system, with sensor control: Charge 627 – Whirlpool with air massage, illuminated overflow slot and mist

Bathtub made of SENTEC solid surface material, casted Drop-in version for the left corner, without panel With overflow slot at front side and tap bank at opposite side With aluminium frame and floor fixation With pre-installed overflow and siphon with click-clack function With waste cover made of SENTEC solid surface Charge 616 – without whirl system, with sensor control for illuminated overflow slot Bathtub with whirl system, with sensor control: Charge 627 – Whirlpool with air massage, illuminated overflow slot and mist

Bathtub made of SENTEC solid surface material, casted Drop-in version for the right corner, without panel With overflow slot at front side and tap bank at opposite side With aluminium frame and floor fixation With pre-installed overflow and siphon with click-clack function With waste cover made of SENTEC solid surface Charge 616 – without whirl system, with sensor control for illuminated overflow slot Bathtub with whirl system, with sensor control: Charge 627 – Whirlpool with air massage, illuminated overflow slot and mist

Bathtub made of SENTEC solid surface material, casted for the left corner, with not removable L-panel right With overflow slot at front side and tap bank at opposite side With aluminium frame and floor fixation With pre-installed overflow and siphon with click-clack function With waste cover made of SENTEC solid surface Charge 616 – without whirl system, with sensor control for illuminated overflow slot Bathtub with whirl system, with sensor control: Charge 627 – Whirlpool with air massage, illuminated overflow slot and mist

Drop in basin LAUFEN PRO S, sanitary ceramic dimensions 560 x 440 mm, angular 1 centre tap hole, overflow in front Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap holes and overflow, 3 tap holes distance 8 inches, 3 tap holes, without overflow, bathtubs, furniture Order no. 81896.3

Stainless Steel Hygiene Box in 6 l and 12l versions. Made of stainless steel, visible surfaces matt brushed. Optional mount on front for hygiene bags. Opening flap, steel wire holder for bin bags. Box made of matt brushed stainless steel 1.4301, brushed satin finish protects against fingerprints. Rounded edges ensure no risk of injury. Comes complete with fastening materials, delivery and installation. Hygiene Boxes: Stainless Steel Hygiene Box 6l: 7754000 Format: 240 × 225 × 125 mm Weight: 1.96 Kg Stainless Steel Hygiene Box 12l: 7753000 Format 300 × 280 × 125 mm Weight: 3.22 Kg Waste bags: various waste bags in different sizes and colours

Flush plate sensitive Visign for More 100 for 2H concealed cistern, 2L concealed cistern, 2C concealed cistern, 1F (8cm) concealed cistern in addition optional available Adapter Model 8355.91 glass touchless flush actuation from front or top, dual flush

Viega Eco Plus WC element for flush plates Visign for the pre-wall mounting please order separately: Viega Eco Plus Fixing set Model 8173 flush actuation from front or top, dual flush technology Components powder-coated steel frame, 2L concealed cistern

Product and processing advantages [LIST] Sturdy profile construction for doors with 75 mm profile depth Glass thicknesses and door inserts up to 54 mm can be used Flush inside and outside for doors opening in and out Leaf-enclosing door inserts on one or both sides Differently designable interior and exterior views – from gentle curves through to consistent rectilinearity Optimised "Lambdatherm" insulation zone with insulating bridges for direct screwing of hardware parts Production-optimised through use of the same parts and the same hardware (door hinges) for doors opening in and out Realisable door sizes (max. width / max. height): 1,500 mm / 3,100 mm Max. door leaf weight of 250 kg Compatible with the front door series HUECK Lambda DS 075 FD and the window series HUECK Lambda WS 075 [/LIST] System data Thermal transmittance: Uf ≥ 1,3 W/m²K Water tightness: (EN 12208): up to class 7 A Air permeability (EN 12207): up to class 4 Resistance to wind load (EN 12210): up to class C2/B2 Burglar resistance (EN 1627): classes RC1N, RC2N and RC2

Flush plate Visign for Style 10 for 2H concealed cistern, 2L concealed cistern, 2C concealed cistern, Standard 2S concealed cistern (model 8180.26), 1F (8cm) concealed cistern plastic manual flush actuation from front or top, dual flush technology Compon

Viega Eco Plus WC element for flush plates Visign for the pre-wall mounting please order separately: Viega Eco Plus Fixing set Model 8173 flush actuation from front, dual flush technology, adjustable ceramic height, barrier-free Components powder-coated

Outlet Ø102mm Fixing on wall, c/c 180mm according to European standard (Wall mount included) Push-fit socket 38-45mm Front mounted. Combination with wall fixture and build in flushing cistern. Can be equipped with seat pads or seat with cover. Purus Stainless steel toilets are practical for surroundings with tough requirements for durability, hygiene and the possibility for adjustments. For example in public toilets, sports centres, restaurants and public institutions. Stainless steel toilets are also an interesting alternative in specially designed environments such as high and low level security places.

Green Pedestals is a piece of furniture for greenery and vegetation designed by Front. Green Pedestals is part of Offecct’s O2ASIS project which is an assortment of design products, that combined with vegetation enhances and adds value to the work environ

Handicap model Outlet Ø102mm Fixing on wall, c/c 180mm according to European standard (Wall mount included) Push-fit socket 38-45mm Front mounted. Combination with wall fixture and build in flushing cistern. Can be equipped with seat pads or seat with cover. Purus Stainless steel toilets are practical for surroundings with tough requirements for durability, hygiene and the possibility for adjustments. For example in public toilets, sports centres, restaurants and public institutions. Stainless steel toilets are also an interesting alternative in specially designed environments such as high and low level security places.

<p><span></span></p> <p>Dune offers an exciting new response to the constantly changing needs of our work places and public spaces. Dune has been developed for the spheres where the need for informal meetings intersects with the demand for relaxed seating.<br><br>“We are really satisfied with the lightness of Dune. Despite being so delicate, Dune stands firmly on the ground and offers possibilities to interaction, face to face and digital”, says designers Anna Lindgren and Sofia Lagerkvist, the members of Front. <br><br>Dune is upholstered with a lacquered frame and table tops in MDF.<br><br>Benefits & functions<br>- Can easily seat up to eight people.<br>- The table tops can be equipped with the latest generation USB-sockets. The sockets are available in aluminium or brass.<br>- Can be upholstered in fabric or artificial leather.<br>- The table tops can be equipped with a jacket hanger. <br><br>The frame is available i black, silver or white lacquer alternative in Offecct Flexicolor.<br></p><p></p> <p></p>

Rack enclosure cabinet for blade servers and other data center components. Rack is designed to support power management, efficient cooling and flexible cable management. Front and rear doors will aid cooling and simplify component installations. Numerous sizes and configurations are available.

Medicine cabinet mounted in wall with a mirror front. Approximate size 15" W x 25" H x 4" D.

A surface mounted, satin finish stainless steel, single-fold, paper towel dispenser. Dispenser features: tumbler lock; front hinged at bottom; and refill indicator slot. Minimum capacity 400 single-fold paper towels. For general purpose use throughout the facility.

Constructed of high tensile steel body and jam designed to maximize protection against pry attack. Top or front load depository features a large hopper made of formed heavy duty steel, handle activated and designed for smooth money drop operation and large package capacity. Deposit drawer features a large "fish" resistant pull out drawer depositing directly into standard interior locker.

Apron rail. Also referred to as an apron front, apron panel, or knee space rail. Used to close in front knee space area and/or provide work surface support between two base cabinets or a base cabinet and wall. Apron rails should be ordered in pairs to provide both front and rear work surface support.

Apron rail. Also referred to as an apron front, apron panel, or knee space rail. Used to close in front knee space area and/or provide work surface support between two steel base cabinets or a steel base cabinet and wall. Apron rails should be ordered in pairs to provide both front and rear work surface support. Constructed of steel.

Apron rail. Also referred to as an apron front, apron panel, or knee space rail. Used to close in front knee space area and/or provide work surface support between two base cabinets or a base cabinet and wall. Apron rails should be ordered in pairs to provide both front and rear work surface support.

Apron rail. Also referred to as an apron front, apron panel, or knee space rail. Used to close in front knee space area and/or provide work surface support between two base cabinets or a base cabinet and wall. Apron rails should be ordered in pairs to provide both front and rear work surface support.

Apron rail. Also referred to as an apron front, apron panel, or knee space rail. Used to close in front knee space area and/or provide work surface support between two base cabinets or a base cabinet and wall. Apron rails should be ordered in pairs to provide both front and rear work surface support.

Apron rail. Also referred to as an apron front, apron panel, or knee space rail. Used to close in front knee space area and/or provide work surface support between two base cabinets or a base cabinet and wall. Apron rails should be ordered in pairs to provide both front and rear work surface support.

Apron rail. Also referred to as an apron front, apron panel, or knee space rail. Used to close in front knee space area and/or provide work surface support between two base cabinets or a base cabinet and wall. Apron rails should be ordered in pairs to provide both front and rear work surface support.

Wall hung open front cabinet with two adjustable shelves and sloping top. Also referred to as an open case. For general purpose use throughout the facility.

Wall hung, open front, steel cabinet with two adjustable shelves and sloping top. Also referred to as an open case. For general purpose use throughout the facility.

Heavy duty steel wall cabinet with adjustable shelves suitable for storage of dental laboratory case pans and dental laboratory equipment. Open front construction, no doors, with adjustable shelves. All components must be rust resistant due to the damp environment. Dimensions and shelf configuration vary by manufacturer. The supporting wall may require reinforcement for mounting this cabinet.

Heavy duty steel wall cabinet with adjustable shelves suitable for storage of dental laboratory case pans and dental laboratory equipment. The unit has open front construction (no doors) and adjustable shelves. All components must be rust resistant due to the damp environment. Specific dimensions and shelf configuration vary by manufacturer. The supporting wall may require reinforcement for mounting this cabinet.

Space saving front to back automatic coffee maker. This unit includes a heating tank, connection for a cold water supply, decanter service with three burners, funnel and a water flow controller. The unit is used for semi-automatic coffee brewing in cafeterias and commercial institutions. The unit automatically shuts off the water flow when enough has passed through to fill the pot. The unit is normally provided plumbed with a hot water faucet to the side for making other hot drinks (tea, cider, cocoa, etc.). The database height dimension does not include the clearance for coffee decanters warming on the upper burners.

Bench type radioisotope fumehood. Characteristics/components include a glove-box, a 75 cfm. blower with indicating switch and variable speed power stat and manometer mounted on box front to indicate air flow, 1/4" safety glass viewing panel, three polarized and grounded electrical outlets with indicating switches, a 24 inch fluorescent light with fixtures and switch, two 8 inch double grooved glove ports and neoprene gloves, an inlet filter, two absolute filters with connecting hoses and 40 inches of 2 inch spiral exhaust hose with clamps and a variable height mobile bench, 30-37"H. Unit is customized to fit the specified use requirements.

Histopathology staining fume hood to be used to contain manual and automatic staining stations. Double sliding doors permit access to entire height and half the width of the hood at one time. Integral fluorescent lighting provided for interior visibility. Unit provided with integral blower and hooks to building systems for exhaust to the atmosphere. Unit provides for front to back flow to protect technicians from volatile staining solution vapors. Base model is 30 inches wide but may be procured in widths up to 72 inches wide. Unit is designed to sit on existing bench tops.

TV/DVD Combination with Remote Control, The unit shall have the following minimum features: Front end audio/video/earphone inputs jacks, on screen menu display, HDTV and digital tuning capability, and video tracking adjustment capability.

Folding patient transport wheelchair. Constructed of chrome plated steel with detachable armrest and footrests. Unit has heavy duty front casters with sealed radial high-precision ball bearing assembly. Unit is used for patient transport.

Folding bariatric patient transport wheelchair with a capacity of at least 500 lbs. Constructed with a heavy duty steel frame and double cross brace, with detachable armrest and swing away footrests. Unit has heavy duty front casters and rear wheels with precision wheel bearings in front and rear assembly. Unit is used for patient movement.

A floor mounted bariatric lavatory with a capability to withstand a static downward pressure of 1,000 lbs. at the front of the sink. Lavatory will have a gooseneck faucet with wrist blade handles. Lavatory will be ADA compliant.

Flushing rim sink approximately 18" H x 26" D x 22" W. Also called a clinic service sink. Unit is constructed of vitreous china with an integral flushing rim. It includes: faucet with a fork brace; 6 inch wrist control handles; plain end spout with bucket hook; stainless steel spring type front rim guard; and grid drain. If it is to be floor mounted, a base must be provided. Unit is used in utility rooms to clean equipment and materials.

Siphon jet water closet/ toilet. This unit is wall hung with an elongated bowl, top spud flushometer, seat with open front and check hinge, and carrier. Used in restrooms throughout the health care facility.

A floor mounted, flush valve toilet with an elongated front and a load capacity of 1,000 pounds. The toilet with be vitreous china with a 1.28 or 1.6 Gpf low water consumption rate with a rear outlet. See manufacturer's literature for recommended flush valves and toilet seats.

Siphon jet water closet/ toilet. This unit is wall hung with an elongated bowl, back spud push button flush valve, seat with open front and check hinge, and carrier. For general purpose use in restrooms on psychiatric patient nursing units.

Food freezer approximately 23 CUFT and 84" H x 27" W x 37" D. This unit has a stainless steel case front and doors. The cabinet front and doors are constructed of heavy gauge polished stainless steel to maintain an attractive appearance. The heavy-duty wire shelves are adjustable in one inch increments, used for frozen food storage in food service departments.

Ultrasonic wattmeter. Characteristics/components include electronic and mechanical design to provide superior performance and greater durability; clear Plexiglas tubing on the front panel that allows the operator to immediately determine the liquid level within the sealed reservoir; and power measurements that can be conveniently read on the LCD display. This unit is a one-of-a-kind instrument used by biomedical repair persons who regularly test therapeutic ultrasound devices. Unit is battery powered.

Wall applique or pathway light? Both. This is APPEAL, a bi-emission product for external uses which creates indirect light all-around or an asymmetrical distribution. A dedicated spring locking system allows the front cover to be mounted in central or decentralized position to choose the most suitable and favorite light distribution. LED source is hidden by a polycarbonate anti-UV diffuser and thanks to this we can obtain a total absence of glare and a visible comfort that matches perfectly the minimal aesthetical design.

Neat lines, essential shapes, high performances: WALKER is a wall recessed product developed to enlighten floors with a wide and well-directed light avoiding any glare effect. The front frame, with no visible screws, is fixed through a spring locking system that preserves the elegant and well-proportioned aesthetic.

Bathtub made of sanitary acrylic of 4-5 mm Semi-recessed version, with front panel Only to combine with furniture panel With aluminium frame Charge 000 – without whirl system, without waste and overflow Bathtub with whirl system, with sensor control: Charge 675 – Whirlpool with air and hydro massage and LED light Charge 695 – Whirlpool with air and hydro massage, disinfection system and LED light Bathtub with whirl system, with remote control: Charge 056 – Whirlpool with surround sound system, air and hydro massage and disinfection system, hydro heating and LED light Charge 057 – Whirlpool with surround sound system, air and hydro massage and disinfection system, hydro heating, LED light and cold mist function

Vanity unit, with one drawer, with cut out left and right, with space saving siphon, Body/Front – lacquered surface veneer with solid wood edges Slim front with a 4 mm rim 1 push and pull full extension drawer

Vanity unit, with one drawer, with cut out left and right, with space saving siphon, Body/Front – lacquered surface veneer with solid wood edges Slim front with a 4 mm rim 1 push and pull full extension drawer

Tall cabinet with 4 wooden shelves and push & pull, door left or right, Body/Front – lacquered surface veneer with solid wood edges Slim front with a 4 mm rim 1 push and pull door 4 fixed shelves

Medium cabinet with 2 wooden shelves and push & pull, door left or right, Body/Front – lacquered surface veneer with solid wood edges Slim front with a 4 mm rim 1 push and pull door 2 fixed shelves

Vanity unit, with 2 drawers, with space saving siphon, for washbasin 815281, Body/Front – high-pressure laminate surface (HPL) - water resistant, high impact and scratch resistant extruded anodised aluminium drawer front frame-handle combination drawer fronts 3 mm solide-core HPL material 2 full extension drawers (soft-close mechanism)

Vanity unit, with 2 drawers, with space saving siphon, for washbasin 810282, Body/Front – high-pressure laminate surface (HPL) - water resistant, high impact and scratch resistant extruded anodised aluminium drawer front frame-handle combination drawer fronts 3 mm solide-core HPL material 2 full extension drawers (soft-close mechanism)

Tall cabinet with open front, Body – high-pressure laminate surface (HPL) - water resistant, high impact and scratch resistant With hidden wall fixation 4 fixed shelves

Drawer element with one drawer, Body/Front – high-pressure laminate surface (HPL) - water resistant, high impact and scratch resistant extruded anodised aluminium drawer front frame-handle combination drawer fronts 3 mm solide-core HPL material 1 drawer (soft-close mechanism)

Drawer element with one drawer, Body/Front – high-pressure laminate surface (HPL) - water resistant, high impact and scratch resistant extruded anodised aluminium drawer front frame-handle combination drawer fronts 3 mm solide-core HPL material 1 drawer (soft-close mechanism)

Trolley with two drawers, Body/Front – high-pressure laminate surface (HPL) - water resistant, high impact and scratch resistant extruded anodised aluminium drawer front frame-handle combination drawer fronts 3 mm solide-core HPL material 2 drawers (soft-close mechanism) 4 turnable wheels

Vanity unit, 1600 mm, with cut-out left and right, with space saving siphon and softclose, 2 drawers, for 813971 Body/Front – Surface real wood veneer or, lacquered, Integrated handle in the front, 2 cut outs, with siphon covers chrome

Vanity unit for washbasin with shelf 814971, with softclose, 2 drawers Body/Front – Surface real wood veneer or, lacquered, Integrated handle in the front

Small cabinet, door hinge left White matt: Body melamine faced chipboard PU with ABS edges Front MDF, surface PU lacquer Limed oak: Body/Front melamine faced chipboard with ABS edges with chrome handle 1 door (soft-close mechanism) 2 shelves

Vanity unit with door hinge right, shelves left for asym right washbasin 815954, with space saving siphon, Body/Front – MDF board with PVC foil Integrated handle in the front 1 door, 1 shelf (adjustable), 1 shelf left, side open

Vanity unit, 455 x 330 mm (with1 door),for washbasin 810954, with space saving siphon, Body/Front – MDF board with PVC foil Integrated handle in the front 1 door, 1 glass shelf (adjustable)

Vanity unit, 455 x 330 mm (with1 door),for washbasin 810955, with space saving siphon, Body/Front – MDF board with PVC foil Integrated handle in the front 1 door, 1 glass shelf (adjustable)

Vanity unit with interior drawer for washbasin 818958, with space saving siphon, Body/Front – MDF board with PVC foil Integrated handle in the front

Vanity unit for washbasin 810955, with space saving siphon, Body/Front – MDF board with PVC foil Integrated handle in the front

Vanity unit for washbasin 818959, with space saving siphon, Body/Front – MDF board with PVC foil Integrated handle in the front

Medium cabinet, door hinges right, Body/Front – MDF board with PVC foil, Integrated handle in the front, 1 door, 2 glass shelves (adjustable)

Drop in basin LAUFEN INDOVA, sanitary ceramic, dimensions 570 x 450 mm, oval, 1 centre tap hole, overflow in front, Special feature: overflow channel glazed, Further options: Surface refinement LCC (only white), glazed outer surface, Order no. 811391

Drop in basin LAUFEN INDOVA, sanitary ceramic, dimensions 620 x 485 mm, oval, 1 centre tap hole, overflow in front, Special feature: overflow channel glazed, Further options: Surface refinement LCC (only white), glazed outer surface, Order no. 81139.3

Built in basin ground LIVING CITY, sanitary ceramic dimensions 450 x 455 mm, angular without tap hole, overflow in front Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white), glazed outer surface, furniture Order no. 81343.9

Vanity unit, with one drawer, without cut out, Body/Front – lacquered surface veneer with solid wood edges Slim front with a 4 mm rim 1 push and pull full extension drawer

Vanity unit, with one drawer, with center cut out, with space saving siphon, Body/Front – lacquered surface veneer with solid wood edges Slim front with a 4 mm rim 1 push and pull full extension drawer

Vanity unit, with one drawer, without cut out, Body/Front – lacquered surface veneer with solid wood edges Slim front with a 4 mm rim 1 push and pull full extension drawer

Vanity unit, with one drawer, with center cut out, with space saving siphon, Body/Front – lacquered surface veneer with solid wood edges Slim front with a 4 mm rim 1 push and pull full extension drawer

Vanity unit, with one drawer, without cut out, Body/Front – lacquered surface veneer with solid wood edges Slim front with a 4 mm rim 1 push and pull full extension drawer

Vanity unit, with one drawer, with cut out left, with space saving siphon, Body/Front – lacquered surface veneer with solid wood edges Slim front with a 4 mm rim 1 push and pull full extension drawer

Vanity unit, with one drawer, with cut out right, with space saving siphon, Body/Front – lacquered surface veneer with solid wood edges Slim front with a 4 mm rim 1 push and pull full extension drawer

Vanity unit, with one drawer, with center cut out, with space saving siphon, Body/Front – lacquered surface veneer with solid wood edges [LIST] Slim front with a 4 mm rim 1 push and pull full extension drawer [/LIST]

Vanity unit, with one drawer, without cut out, Body/Front – lacquered surface veneer with solid wood edges Slim front with a 4 mm rim 1 push and pull full extension drawer

Vanity unit, with one drawer, with cut out left, with space saving siphon, Body/Front – lacquered surface veneer with solid wood edges Slim front with a 4 mm rim 1 push and pull full extension drawer

Vanity unit, with one drawer, with cut out right, with space saving siphon, Body/Front – lacquered surface veneer with solid wood edges Slim front with a 4 mm rim 1 push and pull full extension drawer

Vanity unit, with one drawer, with center cut out, with space saving siphon, Body/Front – lacquered surface veneer with solid wood edges Slim front with a 4 mm rim 1 push and pull full extension drawer

Vanity unit, with 2 drawers, with space saving siphon, for washbasin 810283, Body/Front – high-pressure laminate surface (HPL) - water resistant, high impact and scratch resistant extruded anodised aluminium drawer front frame-handle combination drawer fronts 3 mm solide-core HPL material 2 full extension drawers (soft-close mechanism)

Vanity unit, with 2 drawers, with space saving siphon, for washbasin 810284, Body/Front – high-pressure laminate surface (HPL) - water resistant, high impact and scratch resistant extruded anodised aluminium drawer front frame-handle combination drawer fronts 3 mm solide-core HPL material 2 full extension drawers (soft-close mechanism)

Vanity unit, with 2 drawers, with space saving siphon, for washbasin 810285, Body/Front – high-pressure laminate surface (HPL) - water resistant, high impact and scratch resistant extruded anodised aluminium drawer front frame-handle combination drawer fronts 3 mm solide-core HPL material 2 full extension drawers (soft-close mechanism)

Vanity unit, with 2 drawers, with space saving siphon, for washbasin 810287, Body/Front – high-pressure laminate surface (HPL) - water resistant, high impact and scratch resistant extruded anodised aluminium drawer front frame-handle combination drawer fronts 3 mm solide-core HPL material 2 full extension drawers (soft-close mechanism)

Drawer element with one drawer, Body/Front – high-pressure laminate surface (HPL) - water resistant, high impact and scratch resistant extruded anodised aluminium drawer front frame-handle combination drawer fronts 3 mm solide-core HPL material 1 drawer (soft-close mechanism)

Vanity unit, 800 mm, with centre cut-out, with space saving siphon and softclose, with 2 drawers, for 818971 Body/Front – Surface real wood veneer or, lacquered, Integrated handle in the front

Vanity unit, 800 mm, with centre cut-out, with space saving siphon and softclose, with 2 drawers, for 818972 Body/Front – Surface real wood veneer or, lacquered, Integrated handle in the front

Vanity unit, 800 mm, with centre cut-out, with space saving siphon and softclose, with 1 drawer, for 813971 Body/Front – Surface real wood veneer or, lacquered, Integrated handle in the front

Vanity unit, 800 mm, for semi-recessed basin 813972, centre cut-out, with softclose, 1 drawer Body/Front – Surface real wood veneer or, lacquered, Integrated handle in the front

Vanity unit, 1200 mm, with cut-out left, with space saving siphon and softclose, 4 drawers, for 818971 Body/Front – Surface real wood veneer or, lacquered, Integrated handle in the front, 1 cut out left, with space saving siphon

Vanity unit, 1200 mm, with cut-out right, with space saving siphon and softclose, 4 drawers, for 818971 Body/Front – Surface real wood veneer or, lacquered, Integrated handle in the front, 1 cut out right, with space saving siphon

Vanity unit, 1200 mm, with cut-out left, with space saving siphon and softclose, 4 drawers, for 818972 Body/Front – Surface real wood veneer or, lacquered, Integrated handle in the front, 1 cut out left, with space saving siphon

Vanity unit, 1200 mm, with cut-out right, with space saving siphon and softclose, 4 drawers, for 818972 Body/Front – Surface real wood veneer or, lacquered, Integrated handle in the front, 1 cut out right, with space saving siphon

Vanity unit, 1200 mm, with cut-out left, with space saving siphon and softclose, 3 drawers, for 813971 Body/Front – Surface real wood veneer or, lacquered, Integrated handle in the front, 1 cut out left, with space saving siphon

Vanity unit, 1200 mm, with cut-out left, with space saving siphon and softclose, 3 drawers, for 813971 Body/Front – Surface real wood veneer or, lacquered, Integrated handle in the front, 1 cut out right, with space saving siphon

Vanity unit, 1200 mm, for semi-recessed basin 813972, cut-out left, with softclose, 3 drawers Body/Front – Surface real wood veneer or, lacquered, Integrated handle in the front, 1 cut out left, with space saving siphon

Vanity unit 1200 for semi-recessed basin 8.1397.2 cut-out right, with space saving siphon and softclose, 3 drawers Body/Front – Surface real wood veneer or, lacquered, Integrated handle in the front, 1 cut out right, with space saving siphon

Vanity unit, 1600 mm, with cut-out left and right, with space saving siphon and softclose, 2 drawers, for 818971 Body/Front – Surface real wood veneer or, lacquered, Integrated handle in the front, 2 cut outs, with siphon covers chrome

Drawer element 400 mm, for mounting under washtop, with 2 drawers, with soft close mechanism, Body/Front – Surface lacquered real wood veneer or lacquered white, Integrated handle in the front without top for mounting under washtop

Drawer element 800 mm, for mounting under washtop, with 2 drawers, with soft close mechanism, Body/Front – Surface lacquered real wood veneer or lacquered white, Integrated handle in the front without top for mounting under washtop

Vanity unit for washbasin 814976, with soft close mechanism, with 2 drawers, Body/Front – Surface lacquered real wood veneer or lacquered white, Integrated handle in the front

Vanity unit for washbasin 814975, with soft close mechanism, with 2 drawers, Body/Front – Surface lacquered real wood veneer or lacquered white, Integrated handle in the front

Vanity unit for washbasin 814974, with soft close mechanism, with 2 drawers, Body/Front – Surface lacquered real wood veneer or lacquered white, Integrated handle in the front

Vanity unit for washbasin 814973, with soft close mechanism, with 2 drawers, Body/Front – Surface lacquered real wood veneer or lacquered white, Integrated handle in the front

Vanity unit, with one door left, space saving siphon, for washbasin 815301 Body – melamine coated particle board with ABS edges, inside melamine white White: Front 6 mm aluminium, powder coated Walnut: Front 6 mm aluminium, outside real wood veneer, inside white powder coated Side panels outside real wood veneer, inside white melamine 1 push and pull door with 3 integrated aluminium shelves inside the door 1 glass shelf

Vanity unit with one door right for washbasin 815301 Body - melamine coated particle board with ABS edges, inside melamine white White: Front 6 mm aluminium, powder coated Walnut: Front 6 mm aluminium, outside real wood veneer, inside white powder coated Side panels outside real wood veneer, inside white melamine 1 push and pull door with 3 integrated aluminium shelves inside the door 1 glass shelf

Vanity unit, with one door left, space saving siphon, for washbasin 810302 Body – melamine coated particle board with ABS edges, inside melamine white White: Front 6 mm aluminium, powder coated Walnut: Front 6 mm aluminium, outside real wood veneer, inside white powder coated Side panels outside real wood veneer, inside white melamine 1 push and pull door with 3 integrated aluminium shelves

Vanity unit, with one door right, for washbasin 810302 Body – melamine coated particle board with ABS edges, inside melamine white White: Front 6 mm aluminium, powder coated Walnut: Front 6 mm aluminium, outside real wood veneer, inside white powder coated Side panels outside real wood veneer, inside white melamine 1 push and pull door with 3 integrated aluminium shelves inside the door 1 glass shelf

Vanity unit with one drawer, space saving siphon, for washbasin 813301/2 Body – melamine coated particle board with ABS edges, outside lacquered white matt, inside melamine white White: 3-sided drawer aluminium front, outside and inside powder coated Veneer: 3-sided drawer aluminium front, outside real wood veneer, inside powder coated 1 push and pull full extension drawer with metal sides (soft-close mechanism)

Tall cabinet with one door left Body/Front – hand lacquered melamine coated particle board with ABS edges, inside melamine white White: Front 6 mm aluminium, powder coated Walnut: Front 6 mm aluminium, outside real wood veneer, inside white powder coated 1 door (soft-close mechanism) with 5 integrated aluminium shelves inside the door 5 glass shelves

Tall cabinet with one door right Body/Front – hand lacquered melamine coated particle board with ABS edges, inside melamine white White: Front 6 mm aluminium, powder coated Walnut: Front 6 mm aluminium, outside real wood veneer, inside white powder coated 1 door (soft-close mechanism) with 5 integrated aluminium shelves inside the door 5 glass shelves

Vanity unit 500 mm with 1 door left for 810954 White matt: Body melamine faced chipboard PU with ABS edges Front MDF, surface PU lacquer Limed oak: Body/Front melamine faced chipboard with ABS edges with chrome handle 1 door (soft-close mechanism) 1 shelf

Vanity unit 500 mm with 1 door right, for 810954 White matt: Body melamine faced chipboard PU with ABS edges Front MDF, surface PU lacquer Limed oak: Body/Front melamine faced chipboard with ABS edges with chrome handle 1 door (soft-close mechanism) 1 shelf

Vanity unit 500 mm with 2 doors, for 810954 White matt: Body melamine faced chipboard PU with ABS edges Front MDF, surface PU lacquer Limed oak: Body/Front melamine faced chipboard with ABS edges with chrome handles 2 doors (soft-close mechanism) 1 shelf

Vanity unit 560 mm with 2 drawers, for 810955 White matt: Body melamine faced chipboard PU with ABS edges Front MDF, surface PU lacquer Limed oak: Body/Front melamine faced chipboard with ABS edges with chrome handles 2 drawers (soft-close mechanism)

Vanity unit 560 mm with 2 doors, for 810955 White matt: Body melamine faced chipboard PU with ABS edges Front MDF, surface PU lacquer Limed oak: Body/Front melamine faced chipboard with ABS edges with chrome handles 2 doors (soft-close mechanism) 1 shelf

Vanity unit 600 mm with 2 drawers, for 810956 White matt: Body melamine faced chipboard PU with ABS edges Front MDF, surface PU lacquer Limed oak: Body/Front melamine faced chipboard with ABS edges with chrome handles 2 drawers (soft-close mechanism)

Vanity unit 800 mm with 2 drawers, for 810957 White matt: Body melamine faced chipboard PU with ABS edges Front MDF, surface PU lacquer Limed oak: Body/Front melamine faced chipboard with ABS edges with chrome handles 2 drawers (soft-close mechanism)

Vanity unit 1000 mm with 2 drawers, for 810958 White matt: Body melamine faced chipboard PU with ABS edges Front MDF, surface PU lacquer Limed oak: Body/Front melamine faced chipboard with ABS edges with chrome handles 2 drawers (soft-close mechanism

Vanity unit 1250 mm with 2 drawers, for 810959 White matt: Body melamine faced chipboard PU with ABS edges Front MDF, surface PU lacquer Limed oak: Body/Front melamine faced chipboard with ABS edges with chrome handles 2 drawers (soft-close mechanism

Vanity unit 1250 mm with 4 drawers, for 810959 White matt: Body melamine faced chipboard PU with ABS edges Front MDF, surface PU lacquer Limed oak: Body/Front melamine faced chipboard with ABS edges with chrome handles 4 drawers (soft-close mechanism

Small cabinet, door hinge right White matt: Body melamine faced chipboard PU with ABS edges Front MDF, surface PU lacquer Limed oak: Body/Front melamine faced chipboard with ABS edges with chrome handle 1 door (soft-close mechanism) 2 shelves

Small cabinet, door hinge left White matt: Body melamine faced chipboard PU with ABS edges Front MDF, surface PU lacquer Limed oak: Body/Front melamine faced chipboard with ABS edges with chrome handle 1 door (soft-close mechanism) 3 shelves

Small cabinet, door hinge right White matt: Body melamine faced chipboard PU with ABS edges Front MDF, surface PU lacquer Limed oak: Body/Front melamine faced chipboard with ABS edges with chrome handle 1 door (soft-close mechanism) 3 shelves

Medium cabinet, door hinge left White matt: Body melamine faced chipboard PU with ABS edges Front MDF, surface PU lacquer Limed oak: Body/Front melamine faced chipboard with ABS edges with chrome handle 1 door (soft-close mechanism) 2 shelves

Medium cabinet, door hinge right White matt: Body melamine faced chipboard PU with ABS edges Front MDF, surface PU lacquer Limed oak: Body/Front melamine faced chipboard with ABS edges with chrome handle 1 door (soft-close mechanism) 2 shelves

Tall cabinet, door hinge left White matt: Body melamine faced chipboard PU with ABS edges Front MDF, surface PU lacquer Limed oak: Body/Front melamine faced chipboard with ABS edges with chrome handle 1 door mirrored inside (soft-close mechanism) 4 shelves

Tall cabinet , door hinge right White matt: Body melamine faced chipboard PU with ABS edges Front MDF, surface PU lacquer Limed oak: Body/Front melamine faced chipboard with ABS edges with chrome handle 1 door mirrored inside (soft-close mechanism) 4 shelves

Vanity unit with door hinge left, shelves right for asym left washbasin 815955, with space saving siphon, Body/Front – MDF board with PVC foil Integrated handle in the front 1 door, 1 shelf (adjustable), 1 shelf right, side open

Vanity unit for washbasin 811951, door hinge left, with space saving siphon, Body/Front – MDF board with PVC foil Integrated handle in the front 1 glass shelf (adjustable)

Vanity unit for washbasin 818958, with space saving siphon, Body/Front – MDF board with PVC foil Integrated handle in the front

Vanity unit with one drawer for washbasin 810956, with space saving siphon, Body/Front – MDF board with PVC foil Integrated handle in the front

Vanity unit for washbasin 810957, with space saving siphon, Body/Front – MDF board with PVC foil Integrated handle in the front

Vanity unit with interior drawer for washbasin 810957, with space saving siphon, Body/Front – MDF board with PVC foil Integrated handle in the front

Medium cabinet, door hinges left, body/front – MDF board with PVC foil, integrated handle in the front, 1 door, 2 glass shelves (adjustable)

Tall cabinet, door hinges left, body/front – MDF board with PVC foil, integrated handle in the front, 1 door, 4 glass shelves (adjustable)

Tall cabinet, door hinges right, body/front – MDF board with PVC foil, integrated handle in the front, 1 door, 4 glass shelves (adjustable)

Vanity unit 1000 mm, for 810958, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 1000 mm with interior drawer, for 810958, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 1250 mm with interior drawer, for 810959, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 450 mm, for 815961, with door left, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 450 mm, for 815961, with door right, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 550 mm, for 810962, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 550 mm with interior drawer, for 810962, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 600 mm, for 810963, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 600 mm with interior drawer, for 810963, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 600 mm, for 810963, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 650 mm, for 810964, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 650 mm with interior drawer, for 810964, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 700 mm, for 810967, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 700 mm with interior drawer, for 810967, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 850 mm, for 813965, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 850 mm with interior drawer, for 813965, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 850 mm, for 813965, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 1050 mm, for 813966, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 1050 mm with interior drawer, for 813966, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 1050 mm, for 813966, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 1050 mm, for 813965, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 1200 mm, for 813965, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 1300 mm, for 814968, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 1300 mm with interior drawer, for 814968, body/front – MDF board with PVC foil, integrated handle in the front

Vanity unit 1300 mm, for 814968, body/front – MDF board with PVC foil, integrated handle in the front

Built in basin, ground, LAUFEN BIJOU, sanitary ceramic, dimensions 455 x 400 mm, inside dimensions of the basin 415 x 365 mm, symmetric, 1 centre tap hole, overflow in front, Special feature: overflow channel glazed, Further options: Surface refinement LCC (only white), glazed outer surface, with or without overflow, Order no. 81122.0

Built in basin, ground, LAUFEN BIJOU, sanitary ceramic, dimensions 520 x 455 mm, inside dimensions of the basin 480 x 400 mm, symmetric, 1 centre tap hole, overflow in front, Special feature: overflow channel glazed, Further options: Surface refinement LCC (only white), glazed outer surface, with or without overflow, Order no. 81123.0

Built in basin, ground, LAUFEN BIJOU, sanitary ceramic, dimensions 550 x 480 mm, inside dimensions of the basin 510 x 420 mm, symmetric, 1 centre tap hole, overflow in front, Special feature: overflow channel glazed, Further options: Surface refinement LCC (only white), glazed outer surface, with or without overflow, Order no. 81124.0

Built in basin, ground, LAUFEN CRISTAL, sanitary ceramic, dimensions 520 x 446 mm, inside dimensions of the basin 485 x 405 mm, symmetric, 1 centre tap hole, overflow in front, Special feature: overflow channel glazed, Further options: Surface refinement LCC (only white), glazed outer surface, Order no. 81323.0

Built in basin not grinded LIVING CITY, sanitary ceramic dimensions 450 x 455 mm, angular without tap hole, overflow in front Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white), glazed outer surface, furniture Order no. 81343.8

Drop in basin LAUFEN PRO, sanitary ceramic, dimensions 560 x 440 mm, oval, 1 centre tap hole, overflow in front, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), bathtubs, shower trays, furniture, faucets, Order no. 81395.1

Drop in basin LAUFEN PRO, sanitary ceramic, EN 31, dimensions 560 x 440 mm, angular, 1 centre tap hole, overflow in front, Special feature: overflow channel glazed, Further options / accessories: Surface refinement LCC (only white), 3 tap, holes, without tap holes, glazed outer surface, bathtubs, furniture, Order no. 81396.1

Built in basin grinded LAUFEN MODERNA PLUS, sanitary ceramic, dimensions 505 x 375 mm, inside dimensions of the basin 460 x 325 mm, asymmetric angular, without tap hole, overflow in front, Special feature: overflow channel glazed, Further options: Surface refinement LCC (only white), glazed outer surface, Order no. 81854.1

RBM Low-back Bella is an extension and further development of the existing chair collection; RBM Bella. Both models and RBM Ana are designed by Tias Eckhoff, one of the most acknowledge Scandinavian industrial designers. As the name indicates, the new RBM Low-back Bella collection features lower back height than the classical RBM Bella, and a generous, but slim, light and open form expression, with a strong appeal. The chair is designed for stability and solidity, making it well-suited for all users in various environments in conferences, canteens, meetings e.g. A characteristic «wing» shape on the top of the back, serves as a comfortable armrest and a practical handle when moving the chair. The reknowned comfort and ergonomy from RBM Bella is kept in the new model, through large and well sculpted surfaces in seat and back. RBM Lowback Bella comes with veneer shells in birch, beech and oak, besides 5 delicate CPL laminate colours, including a new grey colour. The models have 4 legged frames in silver and black paint, and chrome. RBM Low-back Bella is available as unupholstered, seat upholstered or in front inside upholstered versions

RBM Low-back Bella is an extension and further development of the existing chair collection; RBM Bella. Both models and RBM Ana are designed by Tias Eckhoff, one of the most acknowledge Scandinavian industrial designers. As the name indicates, the new RBM Low-back Bella collection features lower back height than the classical RBM Bella, and a generous, but slim, light and open form expression, with a strong appeal. The chair is designed for stability and solidity, making it well-suited for all users in various environments in conferences, canteens, meetings e.g. A characteristic «wing» shape on the top of the back, serves as a comfortable armrest and a practical handle when moving the chair. The reknowned comfort and ergonomy from RBM Bella is kept in the new model, through large and well sculpted surfaces in seat and back. RBM Lowback Bella comes with veneer shells in birch, beech and oak, besides 5 delicate CPL laminate colours, including a new grey colour. The models have 4 legged frames in silver and black paint, and chrome. RBM Low-back Bella is available as unupholstered, seat upholstered or in front inside upholstered versions.

A module-based furniture system for special rooms and premises. Simple yet advanced design offers a sophisticated way to provide several sitting surfaces at different levels. The modules can be connected in order to change functionality and expression. The sitting surface twists and turns. Up and down becomes front and back. Three different seating heights. RBM Flip & Fold is best suited to large spaces, e.g. a reception, airport, museum or gallery. Padded material in five different moulds with leg positions in three heights.

A module-based furniture system for special rooms and premises. Simple yet advanced design offers a sophisticated way to provide several sitting surfaces at different levels. The modules can be connected in order to change functionality and expression. The sitting surface twists and turns. Up and down becomes front and back. Three different seating heights. RBM Flip & Fold is best suited to large spaces, e.g. a reception, airport, museum or gallery. Padded material in five different moulds with leg positions in three heights.

A module-based furniture system for special rooms and premises. Simple yet advanced design offers a sophisticated way to provide several sitting surfaces at different levels. The modules can be connected in order to change functionality and expression. The sitting surface twists and turns. Up and down becomes front and back. Three different seating heights. RBM Flip & Fold is best suited to large spaces, e.g. a reception, airport, museum or gallery. Padded material in five different moulds with leg positions in three heights.

A module-based furniture system for special rooms and premises. Simple yet advanced design offers a sophisticated way to provide several sitting surfaces at different levels. The modules can be connected in order to change functionality and expression. The sitting surface twists and turns. Up and down becomes front and back. Three different seating heights. RBM Flip & Fold is best suited to large spaces, e.g. a reception, airport, museum or gallery. Padded material in five different moulds with leg positions in three heights.

A module-based furniture system for special rooms and premises. Simple yet advanced design offers a sophisticated way to provide several sitting surfaces at different levels. The modules can be connected in order to change functionality and expression. The sitting surface twists and turns. Up and down becomes front and back. Three different seating heights. RBM Flip & Fold is best suited to large spaces, e.g. a reception, airport, museum or gallery. Padded material in five different moulds with leg positions in three heights.

The uniqueness of the door portal is that it opens inwards but incorporating the outside in the closed position. The frame is hidden behind the panel sheets in the front for a smoother appearance. The portal is provided as standard with 10 x 21 M door leaf. The door leaf can be provided in glass or compact and still reach up to 35 dB noise reduction.

Track spotlight ''Simple outside, clever inside''. The simple shape is neutral and widely generic to fit easily anywhere. Thanks to variety of applications, an uncompromising performance and high efficiency, it has the power to point the attention and to create a special atmosphere in a space. The front of the fixture is what makes it unique and different. To achieve high visual comfort the reflector is inwardly recessed, while the funnel acts as a transition zone to minimize the contrast. Design: Serge Cornelissen

One-of-a-kind aluminium faucetSafe Tough reduces the heat on the front of the faucet. Maintains even water temperature upon pressure and temperature changes.

One-of-a-kind aluminium faucetSafe Tough reduces the heat on the front of the faucet.Maintains even water temperature upon pressure and temperature changes

Safe Touch reduces the heat on the front of the faucet. Maintains even water temperature upon pressure and temperature changes. Can be expanded with bathtub spout.

Safe Touch reduces the heat on the front of the faucetMaintains even water temperature upon pressure and temperature changesCan be expanded with ceiling shower set

Safe Touch reduces the heat on the front of the faucetMaintains even water temperature upon pressure and temperature changesSmart built-in diverter in hose attachment

Safe Touch reduces the heat on the front of the faucet. Maintains even water temperature upon pressure and temperature changes Can be expanded with bathtub spout

Safe Touch reduces the heat on the front of the faucetMaintains even water temperature upon pressure and temperature changesCan be expanded with bathtub spout

PowerCat 6 Patch Panels are the premier Molex patch panel product line. A key product used in both Category 6 link and channel gigabit ethernet applications. The IDC section consists of V-shaped contacts that flex not fatigue when terminated. Each port features a patented spring-loaded shutter and can be colour coded to match jack outlets. Offering both front and rear labelling options, the patch panel is constructed of cold-rolledsteel for additional strength and durability. [LIST] Available in 1U 24 Port and 2U 48 Port density Each port features the patented spring-loaded shutter: prevents incomplete mating, protects from dust and contaminants Patented IDC V-shaped contacts that flex not fatigue when terminated Features pointed IDC towers to speed termination and enhance cable retention Dual colour-coding allows for 568 A/B wiring configuration Front and rear port labelling as well as panel identification label 4 x 6 ganged jack configuration Individually removable patch panel ports Integral cable management shelf ensures bend radius compliance Available with either ANSI or metric hardware kit Can be terminated using industry standard punchdown tools RJ-11& RJ-12 compatible Molded category identification on each port face as well as optional port identification icon [/LIST]

BeSeated is engineered and designed with future needs and solutions. The concept BeSeated is developed based on ideas from the user; modern, functional, thoughtful and flexible. BeSeated has clean, organic lines, manufactured in recyclable molded polypropylene (PP) plastic with polished aluminum details. BeSeated comes with high or low back. Single writing tablet in compact laminate, or fixed writing board in MDF. Front panel. Optional padded cushion on the seat, backrest and headrest Available with integrated power supply. Can be mounted on both vertical and horizontal steps and on boom. Textiles desired. Base and boom black eloxert aluminum.

Vox Rectangular 1-hole vessels washbasin 500 mm With overflow Ground underside Wide choice : 6 dimensions, with or without tap deck, with or without overflow hole, drilling Ø, 1 or 2 holes Esthetic: Rectangular overflow hole in the front, with cover, rim height reduced to 10.5 cm CLEAN, NEAT INSTALLATION: Ground underside. Bowl depth does not exceed total basin height, reduced cutout for top (trap, overflow channel and tap fittings)

Ditec Cross 30 is a rugged, powerful gate opener suitable for gates up to 3000 kg heavy and 20 m wide. It's the ideal solution for automatic gates for intensive service (community and industrial entrances) and feature easy and trouble-free installation. Ditec Cross30E is equipped with built-in electronic control panel, magnetic limit switches and the whole system is housed in a robust steel cabinet. The internal components and Control Unit are in easy reach through the large front removable cover. The gate opener can be complemented with the wide range of Ditec command, control and safety devices. Ditec Cross fully complies with European Directives.

- Made of MDF, painted in semi gloss finish - Construction made of laminated wooden plate - Kitchen countertops in oak, solid wood, either long or short oiled oak stave - Hinges and stoppers for cabinet doors or drawers delivered by a reputable supplier - Use of durable handles delivered by a well known company - Lightning on the bench and in the showcase cabinets alternatives: - Possibility to project and produce specially designed kitchen furnitures - Possibility to inframe a stove, tv and more - Great choice of colours with the use of NCS and RAL systems - Possibility to produce the furniture in materials like MDF, timber veneer, wood - Showcase cabinets with glass front, milled profile - Benchplate made in laminate, wood or stone

- Made of MDF, painted in semi gloss finish - Construction made of laminated wooden plate - Kitchen countertops in oak, solid wood, either long or short oiled oak stave - Hinges and stoppers for cabinet doors or drawers delivered by a reputable supplier - Use of durable handles delivered by a well known company - Lightning on the bench and in the showcase cabinets alternatives: - Possibility to project and produce specially designed kitchen furnitures - Possibility to inframe a stove, tv and more - Great choice of colours with the use of NCS and RAL systems - Possibility to produce the furniture in materials like MDF, timber veneer, wood - Showcase cabinets with glass front, milled profile - Benchplate made in laminate, wood or stone

- Made of MDF, painted in semi gloss finish - Construction made of laminated wooden plate - Kitchen countertops in oak, solid wood, either long or short oiled oak stave - Hinges and stoppers for cabinet doors or drawers delivered by a reputable supplier - Use of durable handles delivered by a well known company - Lightning on the bench and in the showcase cabinets alternatives: - Possibility to project and produce specially designed kitchen furnitures - Possibility to inframe a stove, tv and more - Great choice of colours with the use of NCS and RAL systems - Possibility to produce the furniture in materials like MDF, timber veneer, wood - Showcase cabinets with glass front, milled profile - Benchplate made in laminate, wood or stone

- Made of MDF, painted in semi gloss finish - Construction made of laminated wooden plate - Kitchen countertops in oak, solid wood, either long or short oiled oak stave - Hinges and stoppers for cabinet doors or drawers delivered by a reputable supplier - Use of durable handles delivered by a well known company - Lightning on the bench and in the showcase cabinets alternatives: - Possibility to project and produce specially designed kitchen furnitures - Possibility to inframe a stove, tv and more - Great choice of colours with the use of NCS and RAL systems - Possibility to produce the furniture in materials like MDF, timber veneer, wood - Showcase cabinets with glass front, milled profile - Benchplate made in laminate, wood or stone

- Made of MDF, painted in semi gloss finish - Construction made of laminated wooden plate - Kitchen countertops in oak, solid wood, either long or short oiled oak stave - Hinges and stoppers for cabinet doors or drawers delivered by a reputable supplier - Use of durable handles delivered by a well known company - Lightning on the bench and in the showcase cabinets alternatives: - Possibility to project and produce specially designed kitchen furnitures - Possibility to inframe a stove, tv and more - Great choice of colours with the use of NCS and RAL systems - Possibility to produce the furniture in materials like MDF, timber veneer, wood - Showcase cabinets with glass front, milled profile - Benchplate made in laminate, wood or stone

- Made of MDF, painted in semi gloss finish - Construction made of laminated wooden plate - Kitchen countertops in oak, solid wood, either long or short oiled oak stave - Hinges and stoppers for cabinet doors or drawers delivered by a reputable supplier - Use of durable handles delivered by a well known company - Lightning on the bench and in the showcase cabinets alternatives: - Possibility to project and produce specially designed kitchen furnitures - Possibility to inframe a stove, tv and more - Great choice of colours with the use of NCS and RAL systems - Possibility to produce the furniture in materials like MDF, timber veneer, wood - Showcase cabinets with glass front, milled profile - Benchplate made in laminate, wood or stone

- Made of MDF, painted in semi gloss finish - Construction made of laminated wooden plate - Kitchen countertops in oak, solid wood, either long or short oiled oak stave - Hinges and stoppers for cabinet doors or drawers delivered by a reputable supplier - Use of durable handles delivered by a well known company - Lightning on the bench and in the showcase cabinets alternatives: - Possibility to project and produce specially designed kitchen furnitures - Possibility to inframe a stove, tv and more - Great choice of colours with the use of NCS and RAL systems - Possibility to produce the furniture in materials like MDF, timber veneer, wood - Showcase cabinets with glass front, milled profile - Benchplate made in laminate, wood or stone

- Made of MDF, painted in semi gloss finish - Construction made of laminated wooden plate - Kitchen countertops in oak, solid wood, either long or short oiled oak stave - Hinges and stoppers for cabinet doors or drawers delivered by a reputable supplier - Use of durable handles delivered by a well known company - Lightning on the bench and in the showcase cabinets alternatives: - Possibility to project and produce specially designed kitchen furnitures - Possibility to inframe a stove, tv and more - Great choice of colours with the use of NCS and RAL systems - Possibility to produce the furniture in materials like MDF, timber veneer, wood - Showcase cabinets with glass front, milled profile - Benchplate made in laminate, wood or stone

- Made of MDF, painted in semi gloss finish - Construction made of laminated wooden plate - Kitchen countertops in oak, solid wood, either long or short oiled oak stave - Hinges and stoppers for cabinet doors or drawers delivered by a reputable supplier - Use of durable handles delivered by a well known company - Lightning on the bench and in the showcase cabinets alternatives: - Possibility to project and produce specially designed kitchen furnitures - Possibility to inframe a stove, tv and more - Great choice of colours with the use of NCS and RAL systems - Possibility to produce the furniture in materials like MDF, timber veneer, wood - Showcase cabinets with glass front, milled profile - Benchplate made in laminate, wood or stone

- Made of MDF, painted in semi gloss finish - Construction made of laminated wooden plate - Kitchen countertops in oak, solid wood, either long or short oiled oak stave - Hinges and stoppers for cabinet doors or drawers delivered by a reputable supplier - Use of durable handles delivered by a well known company - Lightning on the bench and in the showcase cabinets alternatives: - Possibility to project and produce specially designed kitchen furnitures - Possibility to inframe a stove, tv and more - Great choice of colours with the use of NCS and RAL systems - Possibility to produce the furniture in materials like MDF, timber veneer, wood - Showcase cabinets with glass front, milled profile - Benchplate made in laminate, wood or stone

- Made of MDF, painted in semi gloss finish - Construction made of laminated wooden plate - Kitchen countertops in oak, solid wood, either long or short oiled oak stave - Hinges and stoppers for cabinet doors or drawers delivered by a reputable supplier - Use of durable handles delivered by a well known company - Lightning on the bench and in the showcase cabinets alternatives: - Possibility to project and produce specially designed kitchen furnitures - Possibility to inframe a stove, tv and more - Great choice of colours with the use of NCS and RAL systems - Possibility to produce the furniture in materials like MDF, timber veneer, wood - Showcase cabinets with glass front, milled profile - Benchplate made in laminate, wood or stone

Hinged support rail Duo System 800 K - with two gripping levels arranged above each other - upper rail is merged with the top rail at an angle of 135° - upper rail (diameter 33 mm) for holding on to and providing support - bottom rail (diameter 25 mm) starts at a distance of 250 mm from the front edge of the upper rail and is used for holding on to and for turning in from the side - 850 mm projection, wall mounting plate 181 mm high and 130 mm wide - can be folded upwards and, folded downwards with braking mechanism - made of high-quality polyamide in HEWI colours 98 (signal white) or 99 (pure white) - with continuous, corrosion resistant steel core and integrated wall mounting plate made of steel with high-quality polyamide cover - stable three-point fixing - for wall mounting with concealed, non-corrosive and tested fixing materials for different wall systems - with toilet roll holder 950.50.01090, toilet roll holder with WC flushing mechanism and function button (radio-controlled) 950.50.06290, 950.50.06390 and floor supports 950.50.020XA, 950.50.025XA and 950.50.026XA for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the DIN 18040, ÖNORM B1600/1601 and SIA 500 requirements

Hinged support rail Duo - with two gripping levels arranged above each other - upper rail is merged with the top rail at an angle of 135° - upper rail made of rectangular profile, 40 mm wide and 30 mm, provides a wide support surface and large radii for pleasant gripping, used to hold on tight and for support - bottom rail (diameter 25 mm) starts at a distance of 250 mm from the front edge of the upper rail and is used for holding on to and for turning in from the side - 850 mm projection, wall mounting plate 181 mm high and 130 mm wide - can be folded upwards and, folded downwards with braking mechanism - made of metal, high-quality chrome-plated - wall-mounting plate cover made of high-quality chrome-plated synthetic material - stable three-point fixing - for wall mounting with concealed, non-corrosive and tested fixing materials for different wall systems - with toilet roll holder 950.50.01150, toilet roll holder with WC flushing mechanism and function button (radio-controlled) 950.50.06490 (right), 950.50.06590 (left), floor supports 950.50.020XA, 950.50.025XA, 950.50.026XA and arm pad 950.50.03192 for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the DIN 18040, ÖNORM B1600/1601 and SIA 500 requirements

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Forma vanity unit 40 incl. door and water trap. Forma vanity units are available in two depths and various widths. For all depths, you decide front and colour. Choose between light oak, black oak, grey and white. Depending on the width and depth you have various choices of washbasins. Forma is supplied ready-assembled, like everything else from Svedbergs.

Forma vanity unit 40 incl. 1 drawer and water trap. Forma vanity units are available in two depths and various widths. For all depths, you decide front and colour. Choose between light oak, black oak, grey and white. Depending on the width and depth you have various choices of washbasins. Forma is supplied ready-assembled, like everything else from Svedbergs.

Forma vanity unit 60 incl. 1 drawer and water trap. Forma vanity units are available in two depths and various widths. For all depths, you decide front and colour. Choose between light oak, black oak, grey and white. Depending on the width and depth you have various choices of washbasins. Forma is supplied ready-assembled, like everything else from Svedbergs.

Forma vanity unit 60 incl. 2 drawers and water trap. Forma vanity units are available in two depths and various widths. For all depths, you decide front and colour. Choose between light oak, black oak, grey and white. Depending on the width and depth you have various choices of washbasins. Forma is supplied ready-assembled, like everything else from Svedbergs.

Forma vanity unit 80 incl. 1 drawer and water trap.Forma vanity units are available in two depths and various widths. For all depths, you decide front and colour. Choose between light oak, black oak, grey and white. Depending on the width and depth you have various choices of washbasins. Forma is supplied ready-assembled, like everything else from Svedbergs.

Forma vanity unit 80 incl. 2 drawers and water trap. Forma vanity units are available in two depths and various widths. For all depths, you decide front and colour. Choose between light oak, black oak, grey and white. Depending on the width and depth you have various choices of washbasins. Forma is supplied ready-assembled, like everything else from Svedbergs.

Forma vanity unit 100 incl. 1 drawer and water trap.Forma vanity units are available in two depths and various widths. For all depths, you decide front and colour. Choose between light oak, black oak, grey and white. Depending on the width and depth you have various choices of washbasins. Forma is supplied ready-assembled, like everything else from Svedbergs.

Forma vanity unit 100 incl. 2 drawers and water trap. Forma vanity units are available in two depths and various widths. For all depths, you decide front and colour. Choose between light oak, black oak, grey and white. Depending on the width and depth you have various choices of washbasins. Forma is supplied ready-assembled, like everything else from Svedbergs.

Forma vanity unit 120 centre incl. 2 drawers and water trap. Forma vanity units are available in two depths and various widths. For all depths, you decide front and colour. Choose between light oak, black oak, grey and white. Depending on the width and depth you have various choices of washbasins. Forma is supplied ready-assembled, like everything else from Svedbergs.

Forma vanity unit 120 double incl. 4 drawers and water trap. Forma vanity units are available in two depths and various widths. For all depths, you decide front and colour. Choose between light oak, black oak, grey and white. Depending on the width and depth you have various choices of washbasins. Forma is supplied ready-assembled, like everything else from Svedbergs.

The SRW6U SmartRack 6U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The side panels and front door lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible front door can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW6U comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 16.5 inches deep, such as network switches and patch panels.

The SRW9U SmartRack 9U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The side panels and front door lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible front door can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW9U comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 16.5 inches deep, such as network switches and patch panels.

The SRW10US SmartRack 10U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW10US comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.

The SRW12US SmartRack 12U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW12US comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.

The SRW18US SmartRack 18U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 250 pounds. The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW18US comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.

The SRW12USG SmartRack 12U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The front door features a shatter-resistant clear acrylic window that lets you monitor equipment readouts without unlocking the enclosure. Not only does the window help prevent equipment tampering and reduce acoustic noise, but it also adds visual flair to your IT installation. The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft. The top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW12USG comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and 12-24 threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.

Tripp Lite’s SmartRack 18U Mid-Depth Rack Enclosure Cabinet is packed with features designed to simplify rack equipment installations and rack equipment maintenance: top and bottom cable routing ports, perforated door and side panels to promote efficient airflow, adjustable vertical mounting rails and more. And as part of the SmartRack family, the SR18UB is compatible with Tripp Lite’s extensive range of rackmount accessories, enabling you to customize your solution to meet any requirement. The SR18UB ships fully assembled for quick installation and comes with a 5-year warranty. The SR18UB is compatible with all standard 19-inch rack equipment and features front and rear pairs of vertical rails with square mounting holes. The rails are adjustable in quarter-inch increments to accommodate equipment depths from 3 to 32.5 inches, ideal for standard server installation. Adjustment is quick and convenient: simply unscrew the rails, slide them to the desired depth and restore the screws. The rails feature square mounting holes and are capable of supporting up to 1,000 lbs of equipment with included installation hardware. Each rack space within the enclosure is numbered for easy reference. With a locking, reversible front/rear doors and locking, removable side panels, the SR18UB provides safe, secure installation. This prevents unauthorized access to installed equipment while making it easy for authorized personnel to perform inspections, maintenance and equipment replacement.

Tripp Lite’s SmartRack 24U Mid-Depth Rack Enclosure Cabinet is packed with features designed to simplify rack equipment installations and rack equipment maintenance: top and bottom cable routing ports, perforated front and rear doors and solid side panels promote efficient airflow, adjustable vertical mounting rails and more. And as part of the SmartRack family, the SR24UB is compatible with Tripp Lite’s extensive range of rackmount accessories, enabling you to customize your solution to meet any requirement. The SR24UB ships fully assembled for quick installation and comes with a 5-year warranty. The SR24UB is compatible with all standard 19-inch rack equipment and features front and rear pairs of vertical rails with square mounting holes. The rails are adjustable in quarter-inch increments to accommodate equipment depths from 3 to 32.5 inches, ideal for standard server installation. Adjustment is quick and convenient: simply unscrew the rails, slide them to the desired depth and restore the screws. The rails feature square mounting holes and are capable of supporting up to 1,000 lbs of equipment with included installation hardware. Each rack space within the enclosure is numbered for easy reference. With a locking, reversible front/rear doors and locking, removable side panels, the SR24UB provides safe, secure installation for all equipment.

Tripp Lite’s SR25UB premium SmartRack Enclosure Cabinet is packed with features designed to simplify rack equipment installations and rack equipment maintenance: top and bottom cable routing ports, perforated door and side panels to promote efficient airflow, adjustable vertical mounting rails and more. And as part of the SmartRack family, the SR25UB is compatible with Tripp Lite’s extensive range of rackmount accessories, enabling you to customize your solution to meet any requirement. The SR25UB ships fully assembled for quick installation and comes with a 5-year warranty. The SR25UB has 25U of capacity and is compatible with all standard 19-inch rack equipment. The front and rear pairs of vertical rails feature square mounting holes and are numbered by rack space for easy reference. The rails are adjustable in quarter-inch increments to accommodate equipment depths from 4 to 37 inches. Adjustment is quick and convenient: simply unscrew the rails, slide them to the desired depth and restore the screws. The rails feature square mounting holes and are capable of supporting up to 3000 lb of equipment with included installation hardware (2250-lb rolling capacity). With a locking, reversible front door and locking, removable side panels, SR25UB provides safe, secure installation for all equipment. This prevents unauthorized access to installed equipment while making it easy for authorized personnel to perform inspections, maintenance and equipment replacement.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Viega Eco Plus WC element with pre-setting full-flush volume approx. 4.5 l - for flush plates Visign - for pre-wall mounting please order separately: Viega Eco Plus fixing set model 8173 - flush actuation from front, dual flush technology, adjustable ceramic height, barrier-free Components powder-coated steel frame, concealed cistern 2H, WC connection elbow DN90 (depth-adjustable) made of PP, eccentric adapter DN90/100 made of PP, WC connection fitting, fixing material for element (for floor) and ceramic, screws (self-drilling) for fixing to metal support profiles, hole Ø 11 mm for fixing in wooden frame construction or application of fixing element for support arm (model8169.2), alignment help Cistern components corner valve with pre-mounted water connection Rp½, filling valve set, drain valve set Technical data partial flush volume factory setting approx. 3 l partial flush volume setting range approx. 2.5–3 l full flush volume factory setting approx. 4.5 l full flush volume setting range approx. 4.5–6 l Note Immediate reflushing is possible at the factory settings! Flush plates and accessories: product group WC and urinal actuation accessories! Model8161.45 (article 686 154)

Viega Eco Plus WC element with pre-setting full-flush volume approx. 4.5 l - for flush plates Visign, wall-hung WC - for pre-wall mounting please order separately: Viega Eco Plus fixing set model 8173 - flush actuation from front or top, dual flush technology Components powder-coated steel frame, concealed cistern 2L, WC connection elbow DN90 (depth-adjustable) made of PP, eccentric adapter DN90/100 made of PP, WC connection fitting, fixing material for element (for floor) and ceramic, screws (self-drilling) for fixing to metal support profiles, hole Ø 11 mm for fixing in wooden frame construction, alignment help Cistern components corner valve with pre-mounted water connection Rp½, filling valve set, drain valve set Technical data partial flush volume factory setting approx. 3 l partial flush volume setting range approx. 2.5–3 l full flush volume factory setting approx. 4.5 l full flush volume setting range approx. 4.5–6 l Note Immediate reflushing is possible at the factory settings! Dependent of the WC ceramic, the open WC lid may partially cover the flush plate while front actuation! When dealing with WC ceramic with a projection of less than 500 mm, such as e.g.: V & B Viala 765310, Viala 765210, Keramag Renova-Comprimo 204550, Joly 203060, the WC lid may fall shut, and therefore actuation from top should be applied! Flush plates and accessories: product group WC and urinal actuation accessories! Model8130.45 (article 718 992)

Flush plate Visign for Style 11 - for concealed cistern 2H, concealed cistern 2L, concealed cistern 2C, concealed cistern 1F (8 cm) - plastic - manual flush actuation from front or top, dual flush technology Components bowden cable unit, fixing frame, fixing material Model8331.1 (article 597 115)

Flush plate Visign for Style 12 - for concealed cistern 2H, concealed cistern 2L, concealed cistern 2C, concealed cistern 1F (8 cm) - plastic, metal, glass - flush actuation from front or top, dual flush technology Components bowden cable unit, fixing frame, fixing material Model8332.1 (article 597 252; 675 608, 687 861, 687 878)

Flush plate Visign for Style 13 - for concealed cistern 2H, concealed cistern 2L, concealed cistern 2C, concealed cistern Standard 2S (model8180.26), concealed cistern 1F (8 cm) - plastic - manual flush actuation from front or top, dual flush technology Components fixing frame, fixing material Model8333.1 (article 654 504)

Flush plate Visign for Style 14 - for concealed cistern 2H, concealed cistern 2L, concealed cistern 2C, concealed cistern Standard 2S (model8180.26), concealed cistern 1F (8 cm) - plastic - manual flush actuation from front or top, dual flush technology Components fixing frame, fixing material Model8334.1 (article 654 696)

Flush plate Visign for More 101 - for concealed cistern 2H, concealed cistern 2L, concealed cistern 2C - metal, glass - manual flush actuation from front or top, dual flush technology Components bowden cable unit, fixing frame, fixing material Note When used in combination with concealed cistern 1F, at least 50 mm of plaster must be applied to the front of the WC cistern! Model8351.1 (article 597 368)

Flush plate Visign for More 100 - for concealed cistern 2H, concealed cistern 2L, concealed cistern 2C, concealed cistern 1F (8 cm) - metal, glass - manual flush actuation from front or top, dual flush technology Components bowden cable unit, fixing frame, fixing material Model8352.1 (article 597 436)

Flush plate Visign for More 104 - for concealed cistern 2H, concealed cistern 2L, concealed cistern 2C, concealed cistern 1F (8 cm) - metal - manual flush actuation from front or top, dual flush technology Components bowden cable unit, fixing frame, fixing material Model8354.1 (articel 598 457, 598 464, 598 471)

Flush plate Visign for More 103 - for concealed cistern 2H, concealed cistern 2L, concealed cistern 2C, concealed cistern 1F (8 cm) - metal, glass - manual flush actuation from front or top, dual flush technology Components bowden cable unit, fixing frame, fixing material Model8355.1 (article 605 605)

Directional outdoor spotlight, adjustable up to 220 degrees on the horizontal axis. Thanks to its front adjustable ring nut, the light beam opening ranges from a minimum of 8 degrees up to a maximum of 50 degrees. The spotlight casing, available in three different sizes, includes an arrayLED source with varying power. Iris67 has been designed to illuminate green areas: the adjustable light follows the plant growth whereas the peculiar focus enhances well-defined areas.

Directional outdoor spotlight, adjustable up to 220 degrees on the horizontal axis. Thanks to its front adjustable ring nut, the light beam opening ranges from a minimum of 8 degrees up to a maximum of 50 degrees. The spotlight casing, available in three different sizes, includes an arrayLED source with varying power. Iris67 has been designed to illuminate green areas: the adjustable light follows the plant growth whereas the peculiar focus enhances well-defined areas.

Directional outdoor spotlight, adjustable up to 220 degrees on the horizontal axis. Thanks to its front adjustable ring nut, the light beam opening ranges from a minimum of 8 degrees up to a maximum of 50 degrees. The spotlight casing, available in three different sizes, includes an arrayLED source with varying power. Iris67 has been designed to illuminate green areas: the adjustable light follows the plant growth whereas the peculiar focus enhances well-defined areas.

Kyreo ceramic shower tray, square, 70 x 70 x 8 cm - front drain Ø 6 cm ROBUST: Stable fireclay - no bending when used RESISTANT: To chemical agents EXCEPTIONAL LONG LIFE: Vitrified glaze

Kyreo ceramic floorstanding shower tray, square - 80 x 80 x 8 cm - front drain Ø 9 cm ROBUST: Stable fireclay - no bending when used EXCEPTIONAL LONG LIFE: Vitrified glaze HYGIENE: Easy to clean RESISTANT: To chemical agents

Vox Rectangular 1-hole vessels washbasin 80 cm -80 x 45 cm -with overflow -ground underside WIDE CHOICE: 6 dimensions, with or without tap deck, with or without overflow hole, drilling Ø, 1 or 2 holes ESTHETIC: Rectangular overflow hole in the front, with cover, rim height reduced to 10.5 cm

Vox Rectangular 3-hole vessels washbasin 600 mm : 600 x 450 mm With overflow Ground underside MOQ 25 pieces Wide choice : 6 dimensions, with or without tap deck, with or without overflow hole, no drilling Ø, or 1 or 3 holes Esthetic : Rectangular overflow hole in the front, with cover, rim height reduced to 10.5 cm CLEAN, NEAT INSTALLATION: Ground underside. Bowl depth does not exceed total basin height, reduced cutout for top (trap, overflow channel and tap fittings)

Edith_M is a modular lighting fixture for false ceilings. The topLED source and opaline polymethylmethacrylate diffuser result in excellent brightness while guaranteeing reduced consumption. Available in the standard, protection with front IP65 and UGR<19 comfort versions, Edith_M has been developed to provide general lighting facilitating wayfinding and performance of generic activities, especially in industrial environments, offices and public areas.

Edith_M is a modular lighting fixture for false ceilings. The topLED source and opaline polymethylmethacrylate diffuser result in excellent brightness while guaranteeing reduced consumption. Available in the standard, protection with front IP65 and UGR<19 comfort versions, Edith_M has been developed to provide general lighting facilitating wayfinding and performance of generic activities, especially in industrial environments, offices and public areas.

Edith_M is a modular lighting fixture for false ceilings. The topLED source and opaline polymethylmethacrylate diffuser result in excellent brightness while guaranteeing reduced consumption. Available in the standard, protection with front IP65 and UGR<19 comfort versions, Edith_M has been developed to provide general lighting facilitating wayfinding and performance of generic activities, especially in industrial environments, offices and public areas.

Edith_M is a modular lighting fixture for false ceilings. The topLED source and opaline polymethylmethacrylate diffuser result in excellent brightness while guaranteeing reduced consumption. Available in the standard, protection with front IP65 and UGR<19 comfort versions, Edith_M has been developed to provide general lighting facilitating wayfinding and performance of generic activities, especially in industrial environments, offices and public areas.

Wall-hung WC pan. Compatible with all standard frame systems available on the market. Elegant and simple design. Bacteriostatic 304 stainless steel. Stainless steel thickness: 1.5mm. One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene. WC bowl surface is polished with rounded edges for easy cleaning. Concealed perimetral flushing rim. Horizontal water inlet: Ø 55mm. Horizontal waste outlet: Ø 100mm. Water saving: works with 4L or more of water. Shrouded pan. Pre-drilled holes for fixing the toilet seat. Supplied with stainless steel blanking caps when installed without toilet seat lid. Quick and easy to install from the front thanks to a stainless steel mounting frame. Supplied with fixing plate and 6 theft prevention TORX security screws. CE marked. Complies with European standard EN 997 for 4L flush. Optional toilet seat with or without lid. Available for through-the-wall installation in service ducts. Weight: 11kg. 10-year warranty.

Wall-hung WC pan. 700mm elongated pan for improved comfort for people with reduced mobility. Compatible with all standard frame systems available on the market. Elegant and simple design. Bacteriostatic 304 stainless steel. Stainless steel thickness: 1.5mm. One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene. WC bowl surface is polished with rounded edges for easy cleaning. Concealed perimetral flushing rim. Horizontal water inlet: Ø 55mm. Horizontal waste outlet: Ø 100mm. Water saving: works with 4L or more of water. Shrouded pan. Pre-drilled holes for fixing the toilet seat. Supplied with stainless steel blanking caps when installed without toilet seat lid. Quick and easy to install from the front thanks to a stainless steel mounting frame. Supplied with fixing plate and 6 theft prevention TORX security screws. CE marked. Complies with European standard EN 997 for 4L flush. Optional toilet seat with or without lid. Available for through-the-wall installation in service ducts. Weight: 14.5kg. 10-year warranty.

Wall-mounted washbasin. Basin internal diameter: 310mm. Clean and simple design. Bacteriostatic 304 stainless steel. Stainless steel thickness: 1.2mm. Rounded edges prevent injury. Vandal-resistant: shrouded basin, concealed trap. Quick and easy to install from the front thanks to a stainless steel mounting frame. Supplied with 1¼" waste and trap. Without overflow. Supplied with fixing elements. CE marked. Complies with European standard EN 14688. Weight: 5.5kg. 10-year warranty.

The PURMO Plan Compact panel radiators stand out due to their completely flat front panel. The panel is glued to the profiled front, base heating panel in a manner concealing any protruding edges, when looking at the radiator from the front. The radiators are equipped with side covers and a top grille. Four G ½" threaded female connectors allow for side connection on both right and left side.

The versatile PURMO Plan Ventil Compact panel radiators stand out due to their completely flat front panel. The panel is glued to the profiled, front base heating panel in a manner concealing any protruding edges, when looking at the radiator from the front. The radiators are equipped with convection fins as well as side covers and a top grille. Two bottom and four side G ½" threaded female connectors allow for bottom or side connection. The radiator is also equipped with a built-in thermostatic Oventrop valve insert providing presetting.

The PURMO Ramo Compact panel radiators with side connectors stand out due to their flat front panel with slight horizontal ribbing. The panel is glued to the profiled, front base heating panel in a manner concealing any protruding edges, when looking at the radiator from the front. The radiators are equipped with side covers and a top grille. Four side G ½" threaded female connectors allow for side connection on both right and left side.

The landscape laid out in front of us in the public realm is changing and becoming more and more like that of our homes. Activity based offices and better possibilities to work from home have drawn these two separate worlds closer together. Avignon, the new sofa and easy chair by renowned designer Christophe Pillet, fits seamlessly into this new domestic landscape. After all, our demands for durability and our expectations on comfort and quality of material are the same – no matter where we use our furniture.

The landscape laid out in front of us in the public realm is changing and becoming more and more like that of our homes. Activity based offices and better possibilities to work from home have drawn these two separate worlds closer together. Avignon, the new sofa and easy chair by renowned designer Christophe Pillet, fits seamlessly into this new domestic landscape. After all, our demands for durability and our expectations on comfort and quality of material are the same – no matter where we use our furniture.

The versatile PURMO Ramo Ventil Compact panel radiators stand out due to their flat front panel with slight horizontal ribbing. The panel is glued to the profiled, front base heating panel in a manner concealing any protruding edges, when looking at the radiator from the front. The radiators are equipped with convection fins as well as side covers and a top grille. Two bottom and four side G ½" threaded female connectors allow for bottom or side connection. The radiator is also equipped with a built-in thermostatic Oventrop valve insert providing pre-setting.

The PURMO Plan Ventil Compact M panel radiators with mid-bottom connectors stand out due to their completely flat front panel. The panel is glued to the profiled, front base heating panel in a manner concealing any protruding edges, when looking at the radiator from the front. The radiators are equipped with convection fins as well as side covers and a top grille. Two mid-bottom and four side G ½" threaded female connectors allow for central bottom or side connection. The radiator is also equipped with a built-in thermostatic Oventrop valve insert providing pre-setting. The main advantage of the central bottom connection relies of the fact that regardless of the length, height and depth of the radiator, the layout of heating system connections can be defined at the building shell stage and it will not change as a result of the selection of a specific size and type of the radiator.

The PURMO Ramo Ventil Compact M panel radiators with mid-bottom connectors stand out due to their flat front panel with slight horizontal ribbing. The panel is glued to the profiled, front base heating panel in a manner concealing any protruding edges, when looking at the radiator from the front. The radiators are equipped with convection fins as well as side covers and a top grille. Two mid-bottom and four side G ½" threaded female connectors allow for central bottom or side connection. The radiator is also equipped with a built-in thermostatic Oventrop valve insert providing pre-setting. The main advantage of the central bottom connection relies of the fact that regardless of the length, height and depth of the radiator, the layout of heating system connections can be defined at the building shell stage and it will not change as a result of the selection of a specific size and type of the radiator.

Horizontal decorative radiator with a flat front panel and unique slightly curved sides. This horizontal model is provided with an adapted top cover finishing that emphasises its unique design.

Ideal for anywhere you want to underline the height of your interior, the Faro V is also a perfect choice for areas of your home with limited wall space. The visual language of the Faro V is accented by a profiled front, and slightly curved perforated sides. An attractive way to heat your home.

Although bicycle parking is planned and controlled, the end result can create chaos on city streets. Several bicycles may be attached to a single stand, with each one leaning outwards to block the path of pedestrians. Ekberg brings order to chaos in a design that enables individual bicycles to be parked in place and held upright. Ekberg’s frame creates a slot to hold the bicycle’s front wheel securely, while also providing an upright post where the bicycle frame can be securely locked. An excellent choice for contemporary settings, Ekeberg’s design enables bicycles to stand neatly in place. Design: Christian Sæther & Runa Klock

Horizontal decorative radiator with a sectioned front and unique slightly curved sides. This horizontal model is provided with an adapted top cover finishing that emphasises its unique design.

A vertical decorative radiator with a flat front panel, gently finished edges and side covers. The Kos V is a vertical work of crafted wonder, available in a range of colours and finishes, including the striking brushed stainless steel.

A vertical decorative radiator with a flat front panel overlapping heater sides at straight angles. Its modern and stylish design blends perfectly with the latest trends in heating technology.

A vertical decorative radiator with a flat front panel overlapping both heater sides with smooth curves. Its modern and stylish design reflects the latest trends in heating technology.

The idea behind the Study (2017) folding table is to have an easy-to-fold table made entirely of wood and, by incorporating thin legs and tabletop into its construction, to maximise space for its user. The table is also simple to fold and move. You don’t need to turn Study upside down in order to fold it. This table has an integrated “protective skirt” on the front edge and at the sides. With the handle that is milled into the rim, it is also easy to carry when folded. Study comes in lengths of 900, 1200, and 1400 mm and in widths of 450 and 600 mm. The table is 66 mm when it is folded. The tabletop and rim are made of blockboard with veneers in oak, birch or ash, white or black laminate, black desktop and stains. The legs are made of solid wood. The tables can be linked together with the help of elastic straps that are standard. Accessories include trolleys on which up to eight tables can be stored. Use Study to furnish lecture rooms, conference locations, schools, hotels, churches etc.

The idea behind the Study (2017) folding table is to have an easy-to-fold table made entirely of wood and, by incorporating thin legs and tabletop into its construction, to maximise space for its user. The table is also simple to fold and move. You don’t need to turn Study upside down in order to fold it. This table has an integrated “protective skirt” on the front edge and at the sides. With the handle that is milled into the rim, it is also easy to carry when folded. Study comes in lengths of 900, 1200, and 1400 mm and in widths of 450 and 600 mm. The table is 66 mm when it is folded. The tabletop and rim are made of blockboard with veneers in oak, birch or ash, white or black laminate, black desktop and stains. The legs are made of solid wood. The tables can be linked together with the help of elastic straps that are standard. Accessories include trolleys on which up to eight tables can be stored. Use Study to furnish lecture rooms, conference locations, schools, hotels, churches etc.

The idea behind the Study (2017) folding table is to have an easy-to-fold table made entirely of wood and, by incorporating thin legs and tabletop into its construction, to maximise space for its user. The table is also simple to fold and move. You don’t need to turn Study upside down in order to fold it. This table has an integrated “protective skirt” on the front edge and at the sides. With the handle that is milled into the rim, it is also easy to carry when folded. Study comes in lengths of 900, 1200, and 1400 mm and in widths of 450 and 600 mm. The table is 66 mm when it is folded. The tabletop and rim are made of blockboard with veneers in oak, birch or ash, white or black laminate, black desktop and stains. The legs are made of solid wood. The tables can be linked together with the help of elastic straps that are standard. Accessories include trolleys on which up to eight tables can be stored. Use Study to furnish lecture rooms, conference locations, schools, hotels, churches etc.

The idea behind the Study (2017) folding table is to have an easy-to-fold table made entirely of wood and, by incorporating thin legs and tabletop into its construction, to maximise space for its user. The table is also simple to fold and move. You don’t need to turn Study upside down in order to fold it. This table has an integrated “protective skirt” on the front edge and at the sides. With the handle that is milled into the rim, it is also easy to carry when folded. Study comes in lengths of 900, 1200, and 1400 mm and in widths of 450 and 600 mm. The table is 66 mm when it is folded. The tabletop and rim are made of blockboard with veneers in oak, birch or ash, white or black laminate, black desktop and stains. The legs are made of solid wood. The tables can be linked together with the help of elastic straps that are standard. Accessories include trolleys on which up to eight tables can be stored. Use Study to furnish lecture rooms, conference locations, schools, hotels, churches etc.

The idea behind the Study (2017) folding table is to have an easy-to-fold table made entirely of wood and, by incorporating thin legs and tabletop into its construction, to maximise space for its user. The table is also simple to fold and move. You don’t need to turn Study upside down in order to fold it. This table has an integrated “protective skirt” on the front edge and at the sides. With the handle that is milled into the rim, it is also easy to carry when folded. Study comes in lengths of 900, 1200, and 1400 mm and in widths of 450 and 600 mm. The table is 66 mm when it is folded. The tabletop and rim are made of blockboard with veneers in oak, birch or ash, white or black laminate, black desktop and stains. The legs are made of solid wood. The tables can be linked together with the help of elastic straps that are standard. Accessories include trolleys on which up to eight tables can be stored. Use Study to furnish lecture rooms, conference locations, schools, hotels, churches etc.

In the second year of her course at Konstfack, the University College of Arts, Crafts and Design in Stockholm, Moni Beuchel was given the task of designing a piece of furniture for a selected furniture manufacturer. After careful consideration she designed a sofa to suit Karl Andersson & Söner. By chance, we got to see the model and contacted a pleasantly surprised Moni. After some adaptation, the result was Kamón Lounge (2001) armchair, sofa and bench in different lengths. 16 years later, Kamon Dinner (2017) has now been developed. Kamón Dinner is a sofa that offers a more upright sitting position and is suitable to use with tables ranging in height from 720-740 mm. The seat and back cushions are covered entirely in fabric or leather with no visible wood. The filling is polyether. Kamón Dinner also contains a corner unit that can be connected to the sofas. There is the option of having linking devices between sofas and between sofas and corner units. Power connectors can also be positioned near the legs on the front edge under the seat. Read about all products (Lounge, Dinner, Bench) under Product Kamòn.

In the second year of her course at Konstfack, the University College of Arts, Crafts and Design in Stockholm, Moni Beuchel was given the task of designing a piece of furniture for a selected furniture manufacturer. After careful consideration she designed a sofa to suit Karl Andersson & Söner. By chance, we got to see the model and contacted a pleasantly surprised Moni. After some adaptation, the result was Kamón Lounge (2001) armchair, sofa and bench in different lengths. 16 years later, Kamon Dinner (2017) has now been developed. Kamón Dinner is a sofa that offers a more upright sitting position and is suitable to use with tables ranging in height from 720-740 mm. The seat and back cushions are covered entirely in fabric or leather with no visible wood. The filling is polyether. Kamón Dinner also contains a corner unit that can be connected to the sofas. There is the option of having linking devices between sofas and between sofas and corner units. Power connectors can also be positioned near the legs on the front edge under the seat. Read about all products (Lounge, Dinner, Bench) under Product Kamòn.

In the second year of her course at Konstfack, the University College of Arts, Crafts and Design in Stockholm, Moni Beuchel was given the task of designing a piece of furniture for a selected furniture manufacturer. After careful consideration she designed a sofa to suit Karl Andersson & Söner. By chance, we got to see the model and contacted a pleasantly surprised Moni. After some adaptation, the result was Kamón Lounge (2001) armchair, sofa and bench in different lengths. 16 years later, Kamon Dinner (2017) has now been developed. Kamón Dinner is a sofa that offers a more upright sitting position and is suitable to use with tables ranging in height from 720-740 mm. The seat and back cushions are covered entirely in fabric or leather with no visible wood. The filling is polyether. Kamón Dinner also contains a corner unit that can be connected to the sofas. There is the option of having linking devices between sofas and between sofas and corner units. Power connectors can also be positioned near the legs on the front edge under the seat. Read about all products (Lounge, Dinner, Bench) under Product Kamòn.

In the second year of her course at Konstfack, the University College of Arts, Crafts and Design in Stockholm, Moni Beuchel was given the task of designing a piece of furniture for a selected furniture manufacturer. After careful consideration she designed a sofa to suit Karl Andersson & Söner. By chance, we got to see the model and contacted a pleasantly surprised Moni. After some adaptation, the result was Kamón Lounge (2001) armchair, sofa and bench in different lengths. 16 years later, Kamon Dinner (2017) has now been developed. Kamón Dinner is a sofa that offers a more upright sitting position and is suitable to use with tables ranging in height from 720-740 mm. The seat and back cushions are covered entirely in fabric or leather with no visible wood. The filling is polyether. Kamón Dinner also contains a corner unit that can be connected to the sofas. There is the option of having linking devices between sofas and between sofas and corner units. Power connectors can also be positioned near the legs on the front edge under the seat. Read about all products (Lounge, Dinner, Bench) under Product Kamòn.

The versatile Radson Integra Parada panel radiators stand out due to their completely flat front panel. The panel is glued to the profiled, front base heating panel in a manner concealing any protruding edges, when looking at the radiator from the front. The radiators are equipped with convection fins as well as side covers and a top grille. Two bottom and four side G ½" threaded female connectors allow for bottom or side connection. The radiator is also equipped with a built-in Danfoss thermostatic valve insert providing presetting.

The versatile Radson Integra Ramo panel radiators stand out due to their flat front panel with slight horizontal ribbing. The panel is glued to the profiled, front base heating panel in a manner concealing any protruding edges, when looking at the radiator from the front. The radiators are equipped with convection fins as well as side covers and a top grille. Two bottom and four side G ½" threaded female connectors allow for bottom or side connection. The radiator is also equipped with a built-in Danfoss thermostatic valve insert providing pre-setting.

Part numbers: M17A y M17AB The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom. The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc. Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market  Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.  Adjustable power motor to regulate power consumption between 180 and 850 W.  HEPA filter media that filters solid particles in suspension.  Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.  Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.  Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.

Part numbers: M17AC & M17ACS The Speedflow® Plus line of hand dryers is categorized within the eco-fast range of product but with the added value of complying with the requirements of ADAAG for accessibility of public washrooms. This regulation requires that the depth of the dryer cannot exceed 100 mm to facilitate access and movement to people with disabilities inside the washroom. The new Speedflow® Plus hand dryer is especially suitable for places with a high traffic frequency such as airports, shopping centers, sports facilities, etc. Energy efficient, this hand dryer presents very low power consumption. With a maximum power of 850 W, this hand dryer, depending on the configuration applied, consumes only between 0.6 and 2.8 watts per drying cycle and 0.4 W in stand-by mode, one of the lowest energy consumption in the market  Fast (maximum air speed 400 km / h) and quiet (57-65 dBA). Dries hands in only 12 seconds.  Adjustable power motor to regulate power consumption between 180 and 850 W.  HEPA filter media that filters solid particles in suspension.  Micro-switch "ON/OFF" located on the electronic board. Allows to activate/deactivate the heating element.  Detection of fixed targets. If a static object is detected in front of the sensor, the hand dryer automatically stops at 3-5 seconds as a safety measure.  Automatic safety cut-out. After 30 seconds of continuous use the device switches off automatically.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or high pressure laminate. The frame is available in 3 different versions and the fronts of 9 different. Furnished with 5 shelves of which 3 removable, 2 solid doors with spaniel lock and 170 degree opening angle. High pressure laminate on the front makes it extremely durable.

Standard is an economical system characterized by a straight narrow profile providing the door with delicate framing which gives the front an impression of lightness. This popular system is often chosen by our clients. The wardrobes which use the Standard system work very well in narrow halls and in the attic. It is a good solution for minimalist interiors in classic, retro or Scandinavian styles. The wood-like version of the profile suits interiors in Provençal style. Unlike in the Lux system, the profile is characterized by a narrow frame and delicate form of the handle. Main advantage: • The unique in the market, proven and very durable system. • Profiles: powder coating or finished with wood-look PVC coating, corrosion resistant. • The biggest range of door height adjustments among all systems. • The special anti-jumping function which prevents the door from falling out of the track. • Smooth sliding of the door thanks to bottom rollers equipped for bearings. • The buffer strips with long and short hair protecting from dust and damping sounds. • The pneumatic closing mechanisms provide for gentle door closing. • Mechanical lock option is available. Available options: • sliding doors • pivoting doors Contact details: Phone: +48 48 332-17-05 e-mail: komandor@komandor.pl

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 9 different. Furnished with 5 shelves including 3 removable, 2 full doors with locking rod and 2 doors in tempered glass with a handle. 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, all doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, all doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, all doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Divided into 10 equally sized trays, all doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Divided into 10 equally sized trays, all doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Divided into 10 equally sized trays, all doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet for wood and metal craft with frame in direct laminate. Front is available in 10 different variants of either direct laminate or laminate. Frame is available in 3 different designs. Decorated with 12 drawers, tool plate with fixings and 2 full doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet for wood and metal craft with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Tool plate with fixings and 12 boxes, 2 full doors with locking rod, 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Decorated with 4 shelves and 6 drawers, all doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Decorated with 4 shelves and 6 drawers, all doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Decorated with 4 shelves and 6 drawers, all doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Decorated with 3 shelves and 12 boxes, all the doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Decorated with 3 shelves and 12 boxes, all the doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Decorated with 3 shelves and 12 boxes, all the doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Decorated with 30 boxes, all the doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Decorated with 30 boxes, all the doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Decorated with 30 boxes, all the doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, 2 full doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, 2 full doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, 2 full doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, 2 full doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, 2 full doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, 2 full doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, 2 full doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, 2 full doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, 4 full doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, 4 full doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, 4 full doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, 4 full doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, 4 full doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, 4 full doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, 4 full doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, 4 full doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, 4 full doors with locking rod and 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, 2 full doors with locking rod and 2 doors in tempered glass with handle, 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, 2 full doors with locking rod and 2 doors in tempered glass with handle, 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, 2 full doors with locking rod and 2 doors in tempered glass with handle, 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, 2 full doors with locking rod and 2 doors in tempered glass with handle, 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, 2 full doors with locking rod and 2 doors in tempered glass with handle, 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.

Material cabinet with frame in direct laminate. Fronts are available with either direct laminate or laminate. Frames are available in 3 different designs and fronts in 10 different. Furnished with 5 shelves including 3 removable, 2 full doors with locking rod and 2 doors in tempered glass with handle, 170 degree opening angle. High pressure laminate on the front makes it an extremely durable finish.