-
Street Lamp 01 16
GRAPHISOFT SE | 1343649851 -
Recessed Spot 16
GRAPHISOFT SE | 1343649851Recessed ceiling spot lamp.
-
Light Cone Down 16
GRAPHISOFT SE | 1343649851General light source cone directed downward.
-
Floor Lamp 03 16
GRAPHISOFT SE | 1343649851 -
Spotlamp Ceiling 16
GRAPHISOFT SE | 1343649851 -
Philips Light Fixture Master Script 16
Jeroen de Bruin | 1343936190Hanging lamp industrial design www.masterscript.nl
-
Desk Lamp 04 16
GRAPHISOFT SE | 1343649851 -
Fluorescent Wall 16
GRAPHISOFT SE | 1343649851Fluorescent wall lamp.
-
Desk Lamp 01 16
GRAPHISOFT SE | 1343649851 -
Desk Lamp 02 16
GRAPHISOFT SE | 1343649851 -
Halogen Recessed 16
GRAPHISOFT SE | 1343649851Recessed halogen ceiling lamp.
-
Floor Lamp 02 16
GRAPHISOFT SE | 1343649851 -
Spotlamp Wall 16
GRAPHISOFT SE | 1343649851 -
Desk Lamp 03 16
GRAPHISOFT SE | 1343649851 -
Floor Lamp 01 16
GRAPHISOFT SE | 1343649851 -
Light Cone Up 16
GRAPHISOFT SE | 1343649851General light source cone directed upward.
-
Spotlamp Ground 16
GRAPHISOFT SE | 1343649851 -
Spotlight Kit 16
GRAPHISOFT SE | 1343649851Ceiling mounted spotlight kit.
-
bollards 01
ArchiCAD Talk Depository | 1343400505#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D parametric, posts / bollards with\n- optional distance between elements\n- variable diameter of elements\n- optional slope angle
-
bollards 02
ArchiCAD Talk Depository | 1343400505#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D parametric, large posts / bollards with\n- optional distance between elements\n- variable diameter of elements\n- optional slope angle
-
bollards 03
ArchiCAD Talk Depository | 1343400505#http://www.cigraph-store.com library part developed by Fabrizio Diodati www.cigraph-store.com3D parametric, posts / bollards with\n- optional distance between elements\n- variable diameter of elements\n- optional slope angle
-
drainage line 10
ArchiCAD Talk Depository | 1343400423Original Object: Stretchy Line Olivier Dentan Nov 2007 http://pagesperso-orange.fr/archilib.od/ ~~~~~~~~~~~~~~~~~~~~~~~~~~ Modified : Vistasp Mehta Date : 24.11.2008 AC Version : 10 ~~~~~~~~~~~~~~~~~~~~~~~~~~ History ~~~~~~~~~~~~~~~~~~~~~~~~~~ Date : 24.11.2008 1. slightly reduced distance of text from line. 2. changed scaling of text. 3. starting point is no longer stretchable; it made the line length inaccurate. 4. added select by hotline. I prefer that to a couple of hard-to-find hotspots. 5. added ability to write levels at start and end of pipeline. 6. added ability to calculate second point level based on given slope. ~~~~~~~~~~~~~~~~~~~~~~~~~~ Date : 28.11.2008 1. Olivier Dentan pointed out one error each in the Master Script and Parameter Script. FIXED 2. He also pointed out that #3 above is not the case. Looks like I messed something up. The original object he submitted works perfectly. ~~~~~~~~~~~~~~~~~~~~~~~~~~2D drainage line
-
General Light
ArchiCAD Talk Depository | 13434009023D parametric, general light, with optional\n- light starts\n- light stops\n- show light cone\n- distance falloff
-
Pillow 2
ArchiCAD Talk Depository | 13436479453D parametric, Skandiform Pillow 2 with optional\n- bend distance in x, y, z direction\n- plus bend distance in z top\n- side modification\n- upper bending radius front and back\n- lower bending radius\n- edge sharpener
-
Street Lamp 01 17
GRAPHISOFT SE | 1371557723 -
Desk Lamp 04 17
GRAPHISOFT SE | 1371557723 -
Recessed Spot 17
GRAPHISOFT SE | 1371557723Recessed ceiling spot lamp.
-
Prime incrementing numbers along stretchy distance
Paul King | 1642593913Incrementing numbers along stretchy distance
-
Spotlight Kit 17
GRAPHISOFT SE | 1371557723Ceiling mounted spotlight kit.
-
Spotlamp Ceiling 17
GRAPHISOFT SE | 1371557723 -
number-series
Gini Corso | 1443781789Produces a number sequence at given intervals and distance. You can choose start number increment and distance between numbers (horizontal and vertical); font type, font size and font pen.
-
Desk Lamp 01 17
GRAPHISOFT SE | 1371557723 -
Floor Lamp 03 17
GRAPHISOFT SE | 1371557723 -
Fluorescent Wall 17
GRAPHISOFT SE | 1371557723Fluorescent wall lamp.
-
Halogen Recessed 17
GRAPHISOFT SE | 1371557723Recessed halogen ceiling lamp.
-
Light Cone Down 17
GRAPHISOFT SE | 1371557723General light source cone directed downward.
-
Light Cone Up 17
GRAPHISOFT SE | 1371557723General light source cone directed upward.
-
Property Line Text FT
Frank Green | 1650379757Property Line - a site boundary object with surveyor labels. Use the stretchable hotspots to define the boundary and create curved segments. Boundary dimensions update automatically. To use: 1) draw the boundary with 2D elements 2) place this object and stretch the nodes to the boundary points 3) delete the original 2D elements Frank Green modified so the user could change the location of the text. Another modifier is a 'switch' found 1/3 of the distance along the property line. if the 'switch' is moved inside the property line the stack configuration of a straight property line meets and bounds can be 'unstacked'
-
M5705 - Gauge, Distance, Pupillary
|Pupillary distance gauge. Unit is electronic and features corneal reflection, LCD display, 0.5mm measurement increments, and measure fixation PD distance to 30 cm from infinity. Unit runs on battery power and is designed to measure the distance between pupils as well as corneal and pupil diameter.
-
5.1.1 SPECIAL SYSTEMS - High rise - Minimum distance between profiles
|Partition made up of two Pladur® plasterboards screwed on each side of a double, braced structure of galvanised steel and spaced a minimum of 10 mm apart. Both structures are built on Pladur® studs (vertical elements) and Pladur® channels (horizontal elements). Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.
-
5.1.2 SPECIAL SYSTEMS - High rise - Variable distance between profiles
|Partition made up of two Pladur® plasterboards screwed on each side to a double, braced structure of galvanised steel and set apart from each other a variable distance (minimum spacing of 10mm). Both structures are built on Pladur® studs (vertical elements) and Pladur® channels (horizontal elements). Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.
-
Desk Lamp 02 17
GRAPHISOFT SE | 1371557723 -
Desk Lamp 03 17
GRAPHISOFT SE | 1371557723 -
Floor Lamp 01 17
GRAPHISOFT SE | 1371557723 -
Floor Lamp 02 17
GRAPHISOFT SE | 1371557723 -
Fluorescent Wall 17
Marko Ljubevski | 1438250447Fluorescent wall lamp.
-
Spotlamp Ground 17
GRAPHISOFT SE | 1371557723 -
Spotlamp Wall 17
GRAPHISOFT SE | 1371557723 -
a31 IDO Minislim washbasin
IDO Kylpyhuone | 1433842858#http://www.idobathroom.com www.bimlab.fi changelog 01.11.2004 -modifications for skandinavian and russian market 01.03.2004 -backgroudn fill for 2D 01.03.2004 -new and outgoing products 01.03.2004 -fixed outlet distance 01.10.2003 -fixed graphical error in basin 01.03.2003 -initial release
-
LAUFEN PRO S Drop-in washbasin 560 mm
|Drop in basin LAUFEN PRO S, sanitary ceramic dimensions 560 x 440 mm, angular 1 centre tap hole, overflow in front Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap holes and overflow, 3 tap holes distance 8 inches, 3 tap holes, without overflow, bathtubs, furniture Order no. 81896.3
-
M7400 - Light, Exam, Table Mounted, Spotlight
|The exam light shall be table mounted. The light will be a halogen bulb that can produce a continuous and homogeneous spot of light adjustable from 5 to 9 inches in diameter from a set distance. The light intensity shall be a minimum of 750 foot-candles at a distance of 16 inches and have a color temperature of 3,200 degrees Kelvin. The unit will consist of an arm or sleeve of approximately 45 inches in length to allow for easy arm rotation and arm movement up and down.
-
M7401 - Light, Exam, Mobile, Spotlight, Mobile Stand
|The exam light shall be a mobile floor unit. The light will be a halogen bulb or LED that can produce a continuous and homogeneous spot of light adjustable from 5 to 9 inches in diameter from a set distance. The light intensity shall be a minimum of 750 foot-candles at a distance of 16 inches and have a color temperature of 3,200 degrees Kelvin. The unit will consist of an arm or sleeve of approximately 45 inches in length to allow for easy arm rotation and arm movement up and down. The unit shall be mounted on a caster base for easy movement.
-
VAL Washbasin 600 mm
|Countertop basin Laufen VAL, SaphirKeramik EN 31 dimensions 600 x 420 mm 1 centre tap hole Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap holes and overflow, 3 tap holes distance 8 inches, 3 tap holes without overflow, bathtubs, furniture
-
VAL Washbasin 650 mm
|Countertop basin Laufen VAL, SaphirKeramik EN 31 dimensions 650 x 420 mm 1 centre tap hole Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap holes and overflow, 3 tap holes distance 8 inches, 3 tap holes without overflow, bathtubs, furniture
-
LB3 Countertop washbasin 850 x 520 mm
|Cutable countertop basin LAUFEN LB3 CLASSIC, sanitary ceramic, EN 31, dimensions 850 x 520 mm, symmetric, 1 centre tap hole, concealed ceramic waste and overflow, chrome-plated vertical cover, Special feature: cutable to 700 mm, integreated shelves, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 3 tap holes distance 8 inches, siphon, cover, pedestal, side cover, bathtubs, shower trays, furniture, accessories, Order no. 81068.6
-
LB3 Countertop washbasin 1250 x 520 mm
|Cutable countertop basin LAUFEN LB3 CLASSIC, sanitary ceramic, EN 31, dimensions 1250 x 520 mm, symmetric, 1 centre tap hole, concealed ceramic waste and overflow, chrome-plated vertical cover, Special feature: cutable to 700 mm, integreated shelves, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 3 tap holes distance 8 inches, siphon, cover, pedestal, side cover, bathtubs, shower trays, furniture, accessories, Order no. 81068.8
-
LB3 Drop-in washbasin 650 x 490 mm
|Drop in basin LAUFEN LB3 CLASSIC, sanitary ceramic, EN 14688, dimensions 650 x 490 mm, symmetric, 1 centre tap hole, concealed ceramic waste and overflow, chrome-plated, vertical cover, Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 3 tap holes distance 8 inches, bathtubs, shower trays, furniture, accessories, Order no. 81168.2
-
VAL Washbasin undersurface ground 550 mm
|Washbasin undersurface ground Laufen VAL, SaphirKeramik EN 31 dimensions 550 x 420 mm 1 centre tap hole Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap holes and overflow, 3 tap holes distance 8 inches, 3 tap holes without overflow, bathtubs, furniture
-
VAL Washbasin undersurface ground 600 mm
|Washbasin undersurface ground Laufen VAL, SaphirKeramik EN 31 dimensions 600 x 420 mm 1 centre tap hole Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap holes and overflow, 3 tap holes distance 8 inches, 3 tap holes without overflow, bathtubs, furniture
-
VAL Washbasin undersurface ground 650 mm
|Washbasin undersurface ground Laufen VAL, SaphirKeramik EN 31 dimensions 650 x 420 mm 1 centre tap hole Special feature: overflow channel glazed Further options / accessories: Surface refinement LCC (only white), 3 tap holes, without tap holes, 1 tap hole without overflow, without tap holes and overflow, 3 tap holes distance 8 inches, 3 tap holes without overflow, bathtubs, furniture
-
FTA Folding arm drives
|AUMÜLLER folding arm drives have a attractive, rectangular aluminium housing and a latterally positioned folding arm. The folding arm is approximately as long as the housing. When closed, the arm lie flat against the housing. The opening angle is restricted to about 93°. The opening time is about 45 seconds. The mircoprocessor controlled cut-off switch and the motor gear unit are contained into the housing. The integrated microprocessor regulates the drive force by means of a electronic positioning encoder in relation to the stroke length. The soft-start and soft-stop both protect the window drive against overload, and the opening casement as well as the attachment elements against premature wear. The integrated contact can be programmed for return contacts or onward signal transmission. The FTA drives have been developed for installation at the side closing edge of side-hung windows. They are however also used on doors which are opened automatically in the event of a fire to allow the inlet of fresh air, and in normal operation can still be opened easily by means of the latch. The opening angle of the side-hung window or the doors is determined by the distance between the pivot points of the folding arm and the hinges. When used on doors as an airflow opening, the potential-free contact in the window drive is used for control of an electric door-opener or a bolt lock. Various easy-to-install accessories are available for the convenient installation of the drive.
-
HEWI lift-up support rail duo round L850
|Hinged support rail Duo System 800 K - with two gripping levels arranged above each other - upper rail is merged with the top rail at an angle of 135° - upper rail (diameter 33 mm) for holding on to and providing support - bottom rail (diameter 25 mm) starts at a distance of 250 mm from the front edge of the upper rail and is used for holding on to and for turning in from the side - 850 mm projection, wall mounting plate 181 mm high and 130 mm wide - can be folded upwards and, folded downwards with braking mechanism - made of high-quality polyamide in HEWI colours 98 (signal white) or 99 (pure white) - with continuous, corrosion resistant steel core and integrated wall mounting plate made of steel with high-quality polyamide cover - stable three-point fixing - for wall mounting with concealed, non-corrosive and tested fixing materials for different wall systems - with toilet roll holder 950.50.01090, toilet roll holder with WC flushing mechanism and function button (radio-controlled) 950.50.06290, 950.50.06390 and floor supports 950.50.020XA, 950.50.025XA and 950.50.026XA for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the DIN 18040, ÖNORM B1600/1601 and SIA 500 requirements
-
HEWI lift-up support-duo-chr.
|Hinged support rail Duo - with two gripping levels arranged above each other - upper rail is merged with the top rail at an angle of 135° - upper rail made of rectangular profile, 40 mm wide and 30 mm, provides a wide support surface and large radii for pleasant gripping, used to hold on tight and for support - bottom rail (diameter 25 mm) starts at a distance of 250 mm from the front edge of the upper rail and is used for holding on to and for turning in from the side - 850 mm projection, wall mounting plate 181 mm high and 130 mm wide - can be folded upwards and, folded downwards with braking mechanism - made of metal, high-quality chrome-plated - wall-mounting plate cover made of high-quality chrome-plated synthetic material - stable three-point fixing - for wall mounting with concealed, non-corrosive and tested fixing materials for different wall systems - with toilet roll holder 950.50.01150, toilet roll holder with WC flushing mechanism and function button (radio-controlled) 950.50.06490 (right), 950.50.06590 (left), floor supports 950.50.020XA, 950.50.025XA, 950.50.026XA and arm pad 950.50.03192 for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the DIN 18040, ÖNORM B1600/1601 and SIA 500 requirements
-
KS-QUADRO E 12-1,8-DM
|A stone system for flexible, fast and economical masonry for buildings of any size and use. The wall system consists of standard and additional formats. The construction system with the continuous, vertical installation channels over the entire wall height at a distance of 12.5 cm allows simple and substance-friendly integration of electrical and communication lines. Cables are laid in the wall without opening / slitting.
-
KS-QUADRO E 20-1,8-DM
|A stone system for flexible, fast and economical masonry for buildings of any size and use. The wall system consists of standard and additional formats. The construction system with the continuous, vertical installation channels over the entire wall height at a distance of 12.5 cm allows simple and substance-friendly integration of electrical and communication lines. Cables are laid in the wall without opening / slitting.
-
KS-QUADRO E 12-2,0-DM
|A stone system for flexible, fast and economical masonry for buildings of any size and use. The wall system consists of standard and additional formats. The construction system with the continuous, vertical installation channels over the entire wall height at a distance of 12.5 cm allows simple and substance-friendly integration of electrical and communication lines. Cables are laid in the wall without opening / slitting.
-
KS-QUADRO E 20-2,0-DM
|A stone system for flexible, fast and economical masonry for buildings of any size and use. The wall system consists of standard and additional formats. The construction system with the continuous, vertical installation channels over the entire wall height at a distance of 12.5 cm allows simple and substance-friendly integration of electrical and communication lines. Cables are laid in the wall without opening / slitting.
-
FRA Series
|Performance features » With motor electronics controlled via microprocessor for communication and sequence control of connected BSY+ and PLP window drives for opening windows » To be used in conjunction with an internal chamber gearbox and 43 mm mounting distance » Can be combined with any D+H drive with BSY+ technology » BRV (for PLP) or VP (for BSY+) option required for connected window drive » Up to 4 FRA 11‑BSY+ drives on one window possible » Position display for the locking mechanism » LED status display for the drive » Automatic locking mechanism for the window » Increased burglary protection
-
1.1.1 SEPARATION WALLS - Twin frame - Single cavity
|Partition made up of two Pladur® plasterboards screwed onto each side of a free, twin frame of galvanised steel and set apart a variable distance (10 mm minimum). Both structures are built on Pladur® studs (vertical elements) and Pladur® channels (horizontal elements). Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.
-
1.2.1 SEPARATION WALLS - Twin frame - Split cavity
|Partition made up of two Pladur® plasterboards screwed on each side to a free, twin frame of galvanised steel and set apart from each other a variable distance (minimum spacing of 10 mm + thickness of the middle plasterboard). Both structures are built on Pladur® studs (vertical elements) and Pladur® channels (horizontal elements). Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.
-
1.2.2 SEPARATION WALLS - Twin frame braced - Split cavity
|Partition made up of two Pladur® plasterboards screwed onto each side of a double, braced structure of galvanised steel and set apart from each other a variable distance (minimum spacing of 10 mm + thickness of the middle plasterboard). Both structures are built on Pladur® studs (vertical elements) and Pladur® channels (horizontal elements). Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.
-
Fixtures for WC and basin showcase
|This product is only available for the Swedish market. Alterna Fixtures are available in the following variables: Alterna WC and bidet fixture for wall-hung WC with tank or bidet. Universal model suitable for WC with center bolt 230 and 180 mm. The fixture have different bolt-heights, which allows for multiple seat heights, depending on the WC that well be installed. Alterna Washbasin fixtures for bolt and bracket washbasin. Universal model that fits most standard washbasins on the market. Available as a fixed as well as adjustable model. C/c measures for wash basin: Bolt distance, c / c: 150/200/280/352 mm (150 mm must be supplemented with nuts, other bolt distances have prepared nuts in the plate) Console hole, c/c distance of fixture: 375/425/510 mm
-
WC showcase
|This product is only available for the Swedish market. Alterna WC bowls in ceramic. Bolt distance 180 mm c/c. Alterna Opus WC bowls. The inside of the bowl is treated with 3M Easy Clean, making it easy to keep the WC clean. Manufactured according to EN 997. Available in three models with custom seat options: Opus Classic Opus Compact Opus Classic Smart, without rim for increased hygiene and easier cleaning Alterna Basic II WC bowl for wall mounting. With WC-seat in thermoplastic (semi-hard).
-
Fixtures for WC and basin showcase
|This product is only available for the Swedish market. Alterna Fixtures are available in the following variables: Alterna WC and bidet fixture for wall-hung WC with tank or bidet. Universal model suitable for WC with center bolt 230 and 180 mm. The fixture have different bolt-heights, which allows for multiple seat heights, depending on the WC that well be installed. Alterna Washbasin fixtures for bolt and bracket washbasin. Universal model that fits most standard washbasins on the market. Available as a fixed as well as adjustable model. C/c measures for wash basin: Bolt distance, c / c: 150/200/280/352 mm (150 mm must be supplemented with nuts, other bolt distances have prepared nuts in the plate) Console hole, c/c distance of fixture: 375/425/510 mm
-
IDEALRAIN M1 SHK 1F/100 720MM IF/1750 SD
|M1 / M3 shower rod, 100 mm diameter handshower with anti-scale system. Flow reducer at 8 l / min. 720 mm wall rail with diameter 21 mm. Wall brackets with variable center distance from 675 to 550 mm. Shower holder with pressure sliding. Idealflex flexible hose, made of plastic with a metallic effect, from 1750 mm. Transparent soap dish.
-
Partition Sensor - GLS-PART-CN
|The GLS-PART-CN is a sleek, surface-mount partition sensor that utilizes the dependable Cresnet® wired network for power and communications. Designed with hospitality environments in mind, this easily installed sensor uses an infrared (IR) beam to sense the position of movable partitions within a space. The IR beam’s signal strength is adjustable and features a sensing distance of up to four feet, making the GLS-PART-CN a versatile partition sensor with optimized sensing accuracy. Three LEDs on the unit provide at-a-glance information on the sensor’s state of power, communications, and partition detection. The GLS-PART-CN offers mounting options for rooms with finished or droptile ceilings. The GLS-PART-CN has plug-in outputs and built-in time delays. Also, the partition sensor easily connects via Cresnet® to a Crestron control processor to manage divisible room environments. Cresnet The GLS-PART-CN uses the dependable Cresnet wired network for communication between devices. Cresnet provides a simple solution for configuring and wiring sensors as part of any complete Crestron system. Cresnet is the communications backbone for Crestron lighting dimmers, keypads, shades, thermostats, and many other devices. This flexible 4-wire bus provides data communications and 24 Volts DC power for all of the devices on the Cresnet network. Versatile Installation The GLS-PART-CN has a white finish and can mount directly into finished ceilings. For droptile ceilings, the GLS-PART-CN installs into a 1-gang, 3-1/2 inch deep electrical box. In both instances, a decorator-style faceplate[1] can be used to match the GLS-PART-CN with the color of the room. Only about 20 mm of the GLS-PART-CN is visible after installation, making it an unobtrusive addition to a room. Digital Output This sleek sensor delivers unparalleled versatility through an additional output on the terminal block, which can be used as an alternate method of integration with a Crestron Control System® or other system. The 5th pin of the Cresnet connector provides either a 24 Volt, 10 mA output or a closure to ground, perfect for connection with a Versiport or digital input port. Notes: 1. Sold separately.
-
HEWI Hinged support rail Duo WARM TOUCH 950-50-12050
|Hinged support rail Duo System 800 K - with two gripping levels arranged above each other - upper rail is merged with the top rail at an angle of 135° - upper rail (diameter 33 mm) for holding on to and providing support - bottom rail (diameter 25 mm) starts at a distance of 250 mm from the front edge of the upper rail and is used for holding on to and for turning in from the side - 700 mm projection, wall mounting plate 181 mm high and 130 mm wide - can be folded upwards and, folded downwards with braking mechanism - made of high-quality chrome-look coated polyamide that is warm to touch - with continuous anti-corrosion steel core and integrated wall mounting plate made of steel with cover made of chrome-look coated polyamide - stable three-point fixing - for wall mounting with concealed, non-corrosive and tested fixing materials for different wall systems - with toilet roll holder 950.50.01050, toilet roll holder with WC flushing mechanism and function button (radio-controlled) 950.50.06290 (right), 950.50.06390 (left), and floor supports 950.50.020XA, 950.50.025XA and 950.50.026XA for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the ÖNORM B1600/1601 and SIA 500 requirements Article no.: HEWI 950.50.12050
-
HEWI Hinged support rail Duo 950-50-62040
|Hinged support rail Duo - with two gripping levels arranged above each other - upper rail is merged with the top rail at an angle of 135° - upper rail made of rectangular profile, 40 mm wide and 30 mm, provides a wide support surface and large radii for pleasant gripping, used to hold on tight and for support - bottom rail (diameter 25 mm) starts at a distance of 250 mm from the front edge of the upper rail and is used for holding on to and for turning in from the side - 700 mm projection, wall mounting plate 181 mm high and 130 mm wide - can be folded upwards and, folded downwards with braking mechanism - made of metal, high-quality chrome-plated - wall-mounting plate cover made of high-quality chrome-plated synthetic material - stable three-point fixing - for wall mounting with concealed, non-corrosive and tested fixing materials for different wall systems - with toilet roll holder 950.50.01150, toilet roll holder with WC flushing mechanism and function button (radio-controlled) 950.50.06490 (right), 950.50.06590 (left), floor supports 950.50.020XA, 950.50.025XA, 950.50.026XA and arm pad 950.50.03192 for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the ÖNORM B1600/1601 and SIA 500 requirements Article no.: HEWI 950.50.62040
-
HEWI Panic bar to EN 1125 PS111XA10
|System 111 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS111XA10
-
HEWI Panic bar to EN 1125 PS111XA20
|System 111 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Handle made of stainless steel, diameter 25 mm with tubular handle made of stainless steel, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS111XA20
-
HEWI Panic bar to EN 1125 PS111XA30
|System 111 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Version for BKS-locks. Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 32 mm, width of the transmission unit 52 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS111XA30
-
HEWI Panic bar to EN 1125 PS111XA40
|System 111 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Version for BKS-locks. Handle made of stainless steel, diameter 25 mm with tubular handle made of stainless steel, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 32 mm, width of the transmission unit 52 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS111XA40
-
HEWI Panic bar to EN 1125 PS160XA10
|System 162 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS160XA10
-
HEWI Panic bar to EN 1125 PS160XA20
|System 162 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Handle made of stainless steel, diameter 25 mm with tubular handle made of stainless steel, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS160XA20
-
HEWI Panic bar to EN 1125 PS160XA30
|System 162 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Version for BKS-locks. Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 32 mm, width of the transmission unit 52 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS160XA30
-
HEWI Panic bar to EN 1125 PS160XA40
|System 162 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Version for BKS-locks. Handle made of stainless steel, diameter 25 mm with tubular handle made of stainless steel, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 32 mm, width of the transmission unit 52 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS160XA40
-
Hook, bicycle bollard
|Bicycle stands are a staple of the city landscape. Their functional shapes are easy to distinguish, and the lateral line-ups they form in urban centres are hard to miss. With this in mind, the designers set out to create a cycle stand that is bold enough to stand out against an urban backdrop, yet at close range, appear smaller. The broad band of metal forming Hook’s structure enables it to be seen from a distance, while its narrow width appears to streamline its shape when viewed from the side. Available in eye-catching orange, pastel blue or light grey, the colour choice can make the cycle stand more visible or enable it to melt into the background. Design: Note Design Studio.
-
wall 100-15
|The PROTEKTOR wall consists of a U-connection profile on the floor, C-studs with a regular centre distance of 625.0 mm and the upper U-ring tie profile. The choice of the wall profiles depends on both statical and building physical requirements. For further questions regarding steel framing constructions feel free to contact one of our technical consultants of PROTEKTOR.
-
wall 150-15
|The PROTEKTOR wall consists of a U-connection profile on the floor, C-studs with a regular centre distance of 625.0 mm and the upper U-ring tie profile. The choice of the wall profiles depends on both statical and building physical requirements. For further questions regarding steel framing constructions feel free to contact one of our technical consultants of PROTEKTOR.
-
wall 200-15
|The PROTEKTOR wall consists of a U-connection profile on the floor, C-studs with a regular centre distance of 625.0 mm and the upper U-ring tie profile. The choice of the wall profiles depends on both statical and building physical requirements. For further questions regarding steel framing constructions feel free to contact one of our technical consultants of PROTEKTOR.
-
wall 100-20
|The PROTEKTOR wall consists of a U-connection profile on the floor, C-studs with a regular centre distance of 625.0 mm and the upper U-ring tie profile. The choice of the wall profiles depends on both statical and building physical requirements. For further questions regarding steel framing constructions feel free to contact one of our technical consultants of PROTEKTOR.
-
wall 150-20
|The PROTEKTOR wall consists of a U-connection profile on the floor, C-studs with a regular centre distance of 625.0 mm and the upper U-ring tie profile. The choice of the wall profiles depends on both statical and building physical requirements. For further questions regarding steel framing constructions feel free to contact one of our technical consultants of PROTEKTOR.
-
wall 200-20
|The PROTEKTOR wall consists of a U-connection profile on the floor, C-studs with a regular centre distance of 625.0 mm and the upper U-ring tie profile. The choice of the wall profiles depends on both statical and building physical requirements. For further questions regarding steel framing constructions feel free to contact one of our technical consultants of PROTEKTOR.
