<p>Crestron® occupancy sensors and daylight sensors offer a powerful, cost-saving solution for reducing energy consumption and enhancing system functionality. As part of a complete Crestron system, they can be used to enable automation of lighting, shading, HVAC, and AV equipment in a conference room, classroom, office, hallway, or other space. Using Crestron sensors, room lighting can automatically turn on when the room is occupied, turn off when it is vacant, and dim to a lower level when there is sufficient natural daylight from windows and skylights. Sensors can also be used to enhance the capabilities of a room scheduling, asset management, or energy monitoring solution through integration with the Crestron Fusion® Enterprise Management service.<br>The GLS-OIRLCL-C-CN serves dual functions as a passive infrared occupancy sensor and closed-loop photocell daylight sensor (photosensor). It can also operate in vacancy-only mode, and is designed to cover an area up to 450 square feet or 42 square meters. Miniaturized construction affords a nearly hidden appearance when installed in a drywall or drop-tile ceiling. It communicates with a Crestron control system via the Cresnet® network. Setup and configuration is accomplished using Crestron Toolbox software or the optional IR remote (model GLS-REMOTE-ODT/OIR, sold separately).<br>Passive Infrared Occupancy Sensing<br>Passive infrared (PIR) technology employs a highly sensitive specialized lens that divides the field-of-view into 64 detection zones. The sensor detects motion when a warm body passes between zones, achieving dependable motion detection with superior immunity to false triggering from vibrations, inanimate objects, or movement in an adjacent corridor. The detection sensitivity can be set to one of three levels for optimum performance. Timeout can be set to one of six settings ranging from 30 seconds to 30 minutes, preventing the sensor from turning off lights or reporting vacancy during moments when the room is occupied but no one is moving. In addition, a “walk-through” mode (Short Timeout) can be enabled to temporarily override the Timeout setting on occasions when the room is only occupied briefly for 90 seconds or less.<br>Vacancy Only Mode with Grace Occupancy<br>The GLS-OIRLCL-C-CN can be configured to sense vacancy only. In this mode, lighting and other equipment must be turned on manually but shuts off automatically after the room is vacated. The “grace occupancy” feature ensures that if the lights turn off while someone is in the room, they can be turned back on by simply waving a hand within a 15 second grace period.<br><br></p><p><strong>Daylight Sensing<br></strong>Its built-in photocell enables the GLS-OIRLCL-C-CN to function as an closed-loop photosensor as part of a complete daylight harvesting solution. By monitoring the ambient light level in the room, electrical lighting can be dimmed automatically when sufficient natural daylight is available. Daylight harvesting enables organizations to improve energy efficiency by taking advantage of natural sunlight from windows and skylights while maintaining consistent lighting levels throughout the day for a more comfortable workspace.<br><br></p><p><strong>Room Usage Monitoring<br></strong>Through integration with the Crestron Fusion Enterprise Management service, occupancy sensors can be leveraged to log room usage based on occupancy, and to maximize efficiency for room scheduling by reporting if a room is occupied or vacant. In the event no one has shown up for a scheduled meeting, the meeting can be cancelled automatically, making the room available to others.<br><br></p><p><strong>Cresnet®<br></strong>The GLS-OIRLCL-C-CN interfaces with a Crestron control system via Cresnet. Cresnet is a simple 4-wire network bus that provides the communications backbone for a system of Crestron sensors, lighting dimmers and switches, motorized shades, thermostats, keypads, and other devices. The GLS-OIRLCL-C-CN is also powered by 24 Volts DC from the Cresnet network.<br><br></p><p>Ceiling Flush Mount Installation<br>The GLS-OIRLCL-C-CN installs easily in a typical drywall or drop-tile ceiling. Simply drill a one-inch (25 mm) diameter hole and insert the sensor. Integrated compression clips hold the sensor in place. Once installed, it achieves a very discreet and flush appearance against a white ceiling.<br><br></p><p>Note 1: The motion detection pattern is rectangular. The sensor should be positioned and oriented accordingly to achieve the desired performance within the space.<br>Note 2: Some functions described in this spec sheet may require custom commissioning of the control system by an authorized Crestron system programmer.<br></p><p><br></p><p><strong>Key Features</strong><br></p><ul><li>Flush ceiling mount occupancy or vacancy sensor</li><li>Passive infrared (PIR) motion detection</li><li>Fully digital circuitry, highly accurate and reliable performance</li><li>450 square feet (42 m2) rectangular detection pattern</li><li>Vacancy-only mode with grace occupancy</li><li>Adjustable sensitivity and timeout</li><li>Short timeout “walk-through” mode</li><li>Built-in closed-loop photosensor for daylight harvesting</li><li>Monitors ambient light level from natural and artificial light sources</li><li>Enables automation of lighting, shading, HVAC, and AV equipment</li><li>Reduces wasteful energy consumption</li><li>Maintains consistent lighting levels</li><li>Reports room usage to Crestron Fusion®</li><li>Miniaturized construction for a nearly hidden appearance</li><li>Installs quickly in a one-inch (25 mm) diameter hole</li><li>IP64 dust-proof and splash-proof</li><li>Cresnet® wired control system interface</li><li>24 Volts DC powered via Cresnet</li><li>Color-coded flying lead connections</li><li>Easy setup via software or IR remote (sold separately)</li></ul><p><span></span></p><p></p>

Lunex zipscreen fullfilles the requirementes of EU- standard EN 13659 regarding wind and efficient sunshade. It has been testet to endure forces up to 400 Newton per m2 on most common window sizes. Lunex Zipscreen is made with half a zipper which is welded to the fabric on both sides. The zipper halfes is entered into plastic guides which leads the fabric inside the guiderails and leaves no gap for sunrays to leak trough. This is the big difference between a zipscreen and a traditional screen which have no other guidance than a weighted bottom profile and where in some cases light gaps are inevitably. Applications : Lunex Zipscreen can be used wherever the requirement is an effective sunshade and where high winds might be a challenge for a traditional screen. A zipscreen can withstand up to 20 m/s where as a traditional screen often has limits down to 8 m/s. Lunex Zipscreen meets the requirements of access to normal daylight while it provides an optimal shielding of unwanted glare. Product description : All vivble outer profiles are made of high quality extruded aluminum profiles which are powdercoated or anodized to withstand corrosion. Standard colors are anodized (similar to RAL 9006 silver grey) or RAL 9010 white. All other standard RAL colors available for a surcharge. Operation : Lunex Zipscreen is only available with electric motor drive operated by switch, remote or fully automated solar/wind systems.

Applications : Lunex SL90 can be used wherever the demand is an effectiv sun shade. Lunex SL90 meets the requirement for natural daylight in addition to provide an effective shielding of unwanted glare. Product description : All visible outer profiles are made of high quality extruded aluminum which is anodized or powdercoated to withstand corrotion. Standard colors are anodized (similar to RAL 9006 silver grey) or RAL 9010 white. All other standard RAL colors available upon surcharge. Ferrari Soltis is the preferred fabric for SL90, but other fabrics are available on request. Operation : Lunex SL90 can be operated by handcrank or electric motor drive operated by switch, remote and/or fully automated solar/wind systems. Sizes: SL90 can be made in all sizes up to 4000 mm wide by 3500 mm high. Minimum width with motor is 700 mm. Use, durability and maintenance : SL90 requires very little maintenance as it contains very few moving parts unlike venetian blinds which often have high maintenance costs. High gloss powder coating makes them very easy to clean and fabrics can be cleaned with a moist cloth.

CI System Glass Element F100 – A crystal clear advantage – Daylight for a sense of well-being CI System Smoke Lift Glass Element F100 – safety and comfort for living space and workspace Whether used in administrative or residential buildings, school or industry. CI-System Glass Element F100 is the optimum, energy-efficient answer to the desire for daylight from flat roofs. The CI System Smoke Lift Glass Element F100 combines the advantages of the CI System Glass Element F100 and of an electrical SHEV. [LIST] Available with double or triple thermal insulation glazing with Ug values of 1.1 to 0.7 W/m2K optionally with toughened glass, and with clear, matt film if required Available in 16 dimensions for standard model and in 9 dimension for smoke lift model Different Opening drive units for standard model Different Shade systems Thermally insulated, jointless GRP upstand, 15 (only standard), 30. 40, 50 cm in height, with U values of 0.5 W/m2K to 0.9 W/m2K (depending on the characteristics) Environmental product declaration acc. to EN 15804 fast opening (165°) of the smoke lift in less than 60 seconds smoke lift serial with multistage ventilation [/LIST]

CI System Glass Element FE – Variety of transparent design & optimum energy efficiency CI System Smoke Lift Glass Element FE – individual daylight and smoke ventilation elements for high- class residential and administrative buildings With the LAMILUX CI System Element F series, we offer you beautifully shaped elements for flat roofs which will allow you to implement all aspects of modern, energy-efficient, design-oriented construction and put ambitious architectural ideas into practice. The certified SHEV CI System Smoke Lift Glass Element FE according to EN 12101-2 stands out due to excellent heat and sound insulation values and to individually selectable RAL-colors. [LIST] Available with double or triple thermal insulation glazing with Ug values of 1.1 to 0.6 W/m2K optionally with toughened glass, and with clear, matt film if required Available in many dimensions Optimal thermal insulation thanks to thermal-bridge-free overall structure Intelligent controls for natural ventilation and solar protection roller blinds Thermally insulated, joinless GRP upstand 15 (only standard model), 30, 40, 50 cm in height, with U values of 0.5 W/m2K to 0.9 W/m2K (depending on the characteristic) Environmental product declaration acc. to EN 15804 Pyramid-shaped or hipped-roof daylight systems possible (only by standard, not by smoke lift) fast opening (165°) of the smoke lift in less than 60 seconds smoke lift serial with multistage ventilation [/LIST]

The standard model of the external venetian blind with 80 mm beaded slats is the most popular external venetian blind on the market. WAREMA external venetian blinds create an optimal lighting atmosphere at any time of day and allow perfect daylight utilisation. The individually adjustable slat angle ensures that rooms receive just the right amount of daylight while protecting against prying eyes. With our external venetian blinds, we are therefore able to provide flexible daylight utilisation for both maximum energy efficiency and a truly comfortable setting. Construction limit values: [LIST] min. width: 600 mm max. width: 5000 mm max. height: 5000 mm [/LIST]

CI System Smoke Lift Twin The CI System Smoke Lift Twin combines a SHEV function, optimum daylight intake and natural ventilation in a compact system. [LIST] variable dimensions from 1,2m x 0,8m to 3,0m x 3,0m possible independent opening double flap (95°) pneumatical or electrical opening established flaps free of thermal bridges from the continuous rooflight systems numerous glazings selectable multifunctional at different supporting substructures mountable optional available with GRP upstand (fixed dimensions) [/LIST]

CI System Continuous Rooflight B - Energy-efficient and superior statics The first continuous rooflight with complete thermal separation with approval for use in Germany and throughout Europe – for an optimised energy balance. With the CI System Continuous Rooflight B, we have developed a daylight system for intelligent building management that breaks new ground in terms of energy efficiency and structural design. In doing so, we have closely focused on intelligence – on well-engineered individual components in a completely heat-insulated, very economical and sturdy overall system. We call it TIP: Total Insulated Product. [LIST] Numerous glazing types Dimensions: length: endless width: 0.84 m to 6.00 m (inside dimension of frame) Ug values of 3.1 to 1.2 W/m²K Available Smoke and heat ventilation units (tested to EN 12101-2) European Technical Approval -ETA and German General Technical Approvals (ABZ) Enviromental product declararation acc. to EN 15804 [/LIST]

<p>EQUITONE [linea] is a unique 3D shaped, through-coloured facade material that plays with light and shadow. Linea displays a linear texture that highlights the raw inner texture of the core fibre cement material. Every moment of the day, the changing angle of the daylight gives the facade material a different aspect. The material comes in a large panel size and can be transformed into any size or shape in the workshop or on site. No matter what design options you explore, EQUITONE’s through-coloured nature guarantees crisp, monolithic details.</p> <p>Both visible and invisible fixing options exist for EQ2UITONE [linea].</p>

Lamisol® III is available in two versions: as Lamisol® III 90 and as Lamisol® III 70 for narrow installation conditions. Lamisol® III Reflect offers a number of different slat positions in one: The lower blinds zone protects against unwanted glare when working with a monitor, the middle zone ensures beneficial daylight and the upper one directs the light into the interior of the room and creates a pleasant sense of space. This makes the daylight optimally usable in every situation.

Fabric designed for solar protection (especially "screen") OUTSIDE or INSIDE. SUNWORKER blocks up to 94% of the heat, and preserve in the same time visual contact to outside and use of natural daylight Designed to meet new needs in terms of solar protection, Sunworker combines transparency, resistance and fineness with visual and thermal comfort. Made using the Rachel Trameur method of weaving, it boasts excellent mechanical strength. Its regular grain and micro-aerated look ensure transparency that filters both sun light and solar heat. The fact that it has passed numerous European fire-resistance tests (M1, B1, Class1) makes it an ideal fabric for use in locations frequented by the public. Sunworker M1 is available in 150 and 300 cm widths.

The ASSA ABLOY FD2050F folding door from ASSA ABLOY Entrance Systems is one of the most stable folding doors on the market. The ASSA ABLOY FD2050F folding door is suitable for use in premises with high daylight admission demands, or buildings used for product exposure such as showrooms. The highly adaptable design makes it possible to install this door in almost every type of building. The door slides (folds) to the left, right, or in both directions if it is in two parts. Crawford