Nucraft Furniture Company Discovery Table ------ http://www.nucraft.com/

rectangle loster with circle as center

#http://www.onland.info/archives/2006/06/centerline_sym_jm9.php CenterLine Sym JM9 2006-06-20 ©James Murray Prev: CENTERLINE SYMBOL JAM70 7-25-02 CENTERLINE SYMBOL RND 12-16-022D parametric center line symbol

This object uses manufacturer specific information, much of which is typical for the US market. It can also serve as a GDL template for quickly creating other bath fixtures by drawing your own 2D Fragments and substituting your own geometry in the 3D subroutines. Also, note the special "2D" and "3D" options. * Place using Rough-in Center line or Clearance., * 2D "Foot Print View is helpful for coordinating floor tile installations.

Utility center. The unit contains electrical and quick connect air, waste and water utility connections. The center accommodates one umbilical and includes shut-off valves and regulators for both the air and water supplies.

Plumbing connection utility center, sometimes referred to as a 'GUY GRAY BOX'. This recessed utility center provides for hot and cold water connections and a drain connection at sink and other equipment locations. The utility center includes cutoff valves for the water connections, a plug seal for the drain and an outside cover to provide an aesthetic appearance when connections are no longer required. This center may be installed in locations where no plumbing fixtures are included in a design as a future flexibility device, saving many dollars for later facility modifications to incorporate sinks as functions change.

Washtop 900 with center cut out, Body – high-pressure laminate surface (HPL) - water resistant, high impact and scratch resistant with 2 mounting brackets max. load 150 kg

Vanity unit, with one drawer, with center cut out, with space saving siphon, Body/Front – lacquered surface veneer with solid wood edges Slim front with a 4 mm rim 1 push and pull full extension drawer

Vanity unit, with one drawer, with center cut out, with space saving siphon, Body/Front – lacquered surface veneer with solid wood edges Slim front with a 4 mm rim 1 push and pull full extension drawer

Vanity unit, with one drawer, with center cut out, with space saving siphon, Body/Front – lacquered surface veneer with solid wood edges [LIST] Slim front with a 4 mm rim 1 push and pull full extension drawer [/LIST]

Vanity unit, with one drawer, with center cut out, with space saving siphon, Body/Front – lacquered surface veneer with solid wood edges Slim front with a 4 mm rim 1 push and pull full extension drawer

Washtop 1200 with center cut out, Body – high-pressure laminate surface (HPL) - water resistant, high impact and scratch resistant with 2 mounting brackets max. load 150 kg

Washtop 1600 with center cut out, Body – high-pressure laminate surface (HPL) - water resistant, high impact and scratch resistant with 3 mounting brackets max. load 150 kg

Bath with chassis, waste and 2 headrests. Accessories: Flex Center "L" shaped black panel right-hand, Flex Center "L" shaped black panel left-hand.

Bath with chassis, waste and 2 headrests. "L" left hand black skirting panel.

Bath with chassis, waste and 2 headrests. "L" right hand black skirting panel.

Hydromassage bath water, electronic push-button, intensity control, water level indicator and lower back/feet jets. Accessories: Flex Center "L" shaped black panel right-hand, Flex Center "L" shaped black panel left-hand.

Hydromassage bath water, electronic push-button, intensity control, water level indicator and lower back/feet jets. "L" Left hand black skirting panel.

Hydromassage bath water, electronic push-button, intensity control, water level indicator and lower back/feet jets. "L" Right hand black Skirting panel.

Brive single-lever washbasin mixer - 5L/min with supply hoses, - temperature-limiter ring, - side lift rod, - anti-scale aerator, - metal and plastic waste, - maximum flow rate 5L/min.

Single-lever sink mixer, swivel tube spout - C3 model - with water and energy efficient cartridge (lever in center position = cold water) - With supply hoses, - temperature limiter ring, - water-saving: sensitive stop, - swivel tube spout, - anti-scale aerator, - drilling Ø35 mm, - flow rate: 10 l/min.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

A simple and very user friendly flat wall system for partitioning ordinary rooms. Two versions are available: Either suspended from a ceiling rail or running on a floor rail. The individual panels are side-hinged – the end panel is supplied as a door as standard. SWG120 is a good, low cost option when you want a moderate sound rated partition, and parking can be centred on the main rail. The elements are designed on the bonded sandwich principle, giving them an innate stability against torquing. Ergonomically correct operation – integral tower bolts for securing elements help make this a user friendly partition.

On Point table is designed by Mattias Stenberg, the designer behind the successful stool Carry On. With its soft and elegance appearance the table is great for meeting between people but can also be used, with plants and greenery, for seperate private conversations. On Point is a part of Offecct’s O2asis concept and its different center modules makes it possible to fit different sizes of plants into the table. The table is also available with power source which makes it perfect for all public places where electronic devices are used. “The On Point table is a further development of the ideas that originated from the Carry On stool. The series is based on the idea of the informal meeting in a workplace or a public space, for example an airport. With their very obvious handles, the stool provoke mobility and spontaneous meetings. The table is designed to allow full contact between up to eight people around it, while it’s also perfect for more private and intimate gatherings among a few individuals. It is part of Offecct’s O2asis-concept, with vegetation integrated into furniture pieces in order to improve wellbeing and air quality. The table can hold plants and trees of different dimensions, with rings of two sizes placed in the table’s centre. It’s also a way of creating a micro architecture in the room, with the tree’s natural ceiling that makes us feel pleasantly enwrapped and comforted.” /Mattias Stenberg

The chair Bop is developed by Offecct in collaboration with Norwegian design bureau Knudsen Berg Hindenes. Originally, Bop was designed for USF Verftet, an arts arena for music, theater, film and modern art in Bergen, Norway. USF was established in 1993 and is an important actor within arts and culture in Bergen and Norway with the aim of collaborating, strengthening and participating in the development of culture and creativity. Bop has been further developed and is now available with arm rests and also as a bar stool. Bop lives up to the high standards of comfort, durability and adaptability required of a concert chair, but fits perfectly well in other interiors as well. ”When we were redoing the cultural center and creating a larger concert hall we wanted a new concert chair. The development has been a close process between us here at the cultural center, the designers and Offecct”, says Jon Tvilde, head of the cultural center.

Bop is a serie of chairs developed by Offecct in collaboration with Norwegian design bureau Knudsen Berg Hindenes. Originally, Bop was designed for USF Verftet, an arts arena for music, theater, film and modern art in Bergen, Norway. USF was established in 1993 and is an important actor within arts and culture in Bergen and Norway with the aim of collaborating, strengthening and participating in the development of culture and creativity. The chair has since then further developed and is available with elegant wooden legs stained in whitepigmented oak. 2016 Bop Wood became a serie with a bar stool. Also that one with legs in massive wood. Bop lives up to the high standards of comfort, durability and adaptability required of a concert chair, but fits perfectly well in other public interiors as well. ”When we were redoing the cultural center and creating a larger concert hall we wanted a new concert chair. The development has been a close process between us here at the cultural center, the designers and Offecct”, says Jon Tvilde, head of the cultural center.

The chair Bop is developed by Offecct in collaboration with Norwegian design bureau Knudsen Berg Hindenes. Originally, Bop was designed for USF Verftet, an arts arena for music, theater, film and modern art in Bergen, Norway. USF was established in 1993 and is an important actor within arts and culture in Bergen and Norway with the aim of collaborating, strengthening and participating in the development of culture and creativity. Bop has been further developed and is now available with arm rests and also as a bar stool. Bop lives up to the high standards of comfort, durability and adaptability required of a concert chair, but fits perfectly well in other interiors as well. ”When we were redoing the cultural center and creating a larger concert hall we wanted a new concert chair. The development has been a close process between us here at the cultural center, the designers and Offecct”, says Jon Tvilde, head of the cultural center.

<p>“On Point is designed to allow full contact between up to eight people around it, while it’s also perfect for more private and intimate gatherings among a few individuals It’s also a way of creating a micro architecture in the room, with the tree’s natural ceiling that makes us feel pleasantly enwrapped and comforted”, says Mattias Stenberg.</p><p>On Point High, has an upholstered frame with a table top in white-pigmented oak. The center module in the middle of the table top is in lacquered MDF. It is available in different dimensions and makes it possible to fit different sizes of plants into the table. The tables heights make it possible to choose between standing or sitting on a bar stool.</p><p><strong>Benefits & functions</strong><br>- Can be upholstered in fabric or leath<br>- Can be equipped with a powerbox.<br>- It fits up to eight people.<br>- The center module is available in three different spaces, see images below<span></span></p>

Rack enclosure cabinet for blade servers and other data center components. Rack is designed to support power management, efficient cooling and flexible cable management. Front and rear doors will aid cooling and simplify component installations. Numerous sizes and configurations are available.

Single compartment stainless steel sink, drop-in, self-rimming, ledge-type, connected with a drain and provided with a mixing faucet. It shall also be provided with pre-punched fixture holes on 4" center, integral back ledge to accommodate deck-mounted fixtures, brushed/polished interior and top surfaces, and sound deadened. Recommended for use in suspended or U/C/B sink cabinets having a high plastic laminate or Chemsurf laminate countertop/work surface. For general purpose use throughout the facility.

Single compartment stainless steel sink, drop-in, self-rimming, ledge-type, connected with a drain and provided with a mixing faucet. It shall also be provided with pre-punched fixture holes on 4" center, integral back ledge to accommodate deck-mounted fixtures, brushed/polished interior and top surfaces, and sound deadened. Recommended for use in suspended or U/C/B sink cabinets having a high plastic laminate or Chemsurf laminate countertop/work surface. Coordinate actual outside sink dimensions with the actual clear dimension of cabinet specified to ensure that they are compatible. For general purpose use throughout the facility.

Single compartment stainless steel sink, drop-in, self-rimming, ledge-type, connected with a drain and provided with a mixing faucet. It shall also be provided with pre-punched fixture holes on 4" center, integral back ledge to accommodate deck-mounted fixtures, brushed/polished interior and top surfaces, and sound deadened. Recommended for use in suspended or U/C/B sink cabinets having a high plastic laminate or Chemsurf laminate countertop/work surface. Coordinate actual outside sink dimensions with the actual clear dimension of cabinet specified to ensure that they are compatible. For general purpose use throughout the facility.

Single compartment stainless steel sink, drop-in, self-rimming, ledge-type, connected with a drain and provided with a mixing faucet. It shall also be provided with pre-punched fixture holes on 4" center, integral back ledge to accommodate deck-mounted fixtures, brushed/polished interior and top surfaces, and sound deadened. Recommended for use in suspended or U/C/B sink cabinets having a high plastic laminate or Chemsurf laminate countertop/work surface. Coordinate actual outside sink dimensions with the actual clear dimension of cabinet specified to ensure that they are compatible. For general purpose use throughout the facility.

Single compartment stainless steel sink, drop-in, self-rimming, ledge-type, connected with a drain and provided with a mixing faucet. It shall also be provided with punched fixture holes on 4" center, integral back ledge to accommodate deck-mounted fixtures, brushed/polished interior and top surfaces, and sound deadened. Recommended for use in suspended or U/C/B sink cabinets having a high plastic laminate or Chemsurf laminate countertop/work surface. Coordinate actual outside sink dimensions with the actual clear dimension of cabinet specified to ensure that they are compatible. For general purpose use throughout the facility.

Single compartment stainless steel sink, drop-in, self-rimming, ledge-type, connected with a drain and provided with a mixing faucet. It shall also be provided with pre-punched fixture holes on 4" center, integral back ledge to accommodate deck-mounted fixtures, brushed/polished interior and top surfaces, and sound deadened. Recommended for use in suspended or U/C/B sink cabinets having a high plastic laminate or Chemsurf laminate countertop/work surface. Coordinate actual outside sink dimensions with the actual clear dimension of cabinet specified to ensure that they are compatible. For general purpose use throughout the facility.

Single compartment stainless steel sink, drop-in, self-rimming, ledge-type, connected with a drain and provided with a mixing faucet. It shall also be provided with pre-punched fixture holes on 4" center, integral back ledge to accommodate deck-mounted fixtures, brushed/polished interior and top surfaces, and sound deadened. Recommended for use in suspended or U/C/B sink cabinets having a high plastic laminate or Chemsurf laminate countertop/work surface. Coordinate actual outside sink dimensions with the actual clear dimension of cabinet specified to ensure that they are compatible. For general purpose use throughout the facility.

Single compartment stainless steel sink, drop-in, self-rimming, ledge-type, connected with a drain and provided with a mixing faucet. It shall also be provided with pre-punched fixture holes on 4" center, integral back ledge to accommodate deck-mounted fixtures, brushed/polished interior and top surfaces, and sound deadened. Recommended for use in suspended or U/C/B sink cabinets having a high plastic laminate or Chemsurf laminate countertop/work surface. Coordinate actual outside sink dimensions with the actual clear dimension of cabinet specified to ensure that they are compatible. For general purpose use throughout the facility.

Double compartment stainless steel sink, drop-in, self-rimming, ledge-type, connected with a drain and provided with a mixing faucet. It shall also be provided with pre-punched fixture holes on 4" center, integral back ledge to accommodate deck-mounted fixtures, brushed/polished interior and top surfaces, and sound deadened. Recommended for use in suspended or U/C/B sink cabinets having a high plastic laminate or Chemsurf laminate countertop/work surface. Coordinate actual outside sink dimensions with the actual clear dimension of cabinet specified to ensure that they are compatible. For general purpose use throughout the facility.

Dental procedure chair/table. Used in oral surgery to place the patient in any position between upright and prone. Unit comes in multiple colors and can be equipped with restraining straps, rails, IV pole and arm-boards. This unit does not have the connections needed to power a dental utility center from the chair base.

Executive credenza with two (2) box drawers, two (2) file drawers, a center closed storage area with adjustable shelf and floor glides.

Double pedestal executive desk, 30" high X 72" wide X 36" deep with center pencil drawer, three (3) box drawers and reference slide in right hand pedestal; one (1) box drawer, one (1) file drawer, and reference slide in left hand pedestal, locks for each section (pedestal) of the desk, and metal suspension hardware for the file drawer.

Enzyme Immunoassay Analysis (E.I.A.) system for use in the clinical laboratory. System includes sample management center, dynamic incubator and parallel processing system.

Basic Enzyme Immunoassay Analysis (E.I.A.) system for use in the clinical laboratory. System includes sample management center, analyzer module, and plate washing system.

Tissue embedding center. This is a table top unit with a paraffin reservoir and cold plate, grouped together. The unit consists of a paraffin bath and a reservoir draining ledge, a heated work surface, large cold plate, foot pedal or touch plate for dispensing paraffin, a forceps warmer, a heated cassette holder, a temperature range on the paraffin bath of 45-65 degrees centigrade with a paraffin capacity of at least 2 liters, a plate that cools to -5 degrees centigrade or lower, a digital LED temperature display and can accommodate at least 50 cassettes.

Keratometer/ophthalmometer. Unit features a focusing system, engraved focusing scale, positive fixation for rapid measurements, center and peripheral corneal measurements scale with a range from 30D to 60D. Unit is used for measuring corneal astigmatism.

Wall mounted examination light. Unit features high intensity color-corrected lighting, a tungsten halogen lamp and a supporting arm with minimum reach of 45 inches. Physical dimensions refer to the retracted light; one length of the dual swing arm from the wall mount in width and depth and the combined height of the lamp head and folded arms. See manufacturer's requirements for screws and pull-out strengths for mounting. Unit may also have a center mount detachable and sterilizable control handle. The unit is used in clinical treatment rooms and hospital rooms.

Mobile examination light mounted on a floor stand with casters. Unit features colored corrected light, an air-cooled shade and a balanced floating arm. Unit may also have a center mount detachable and sterilizable control handle. Designed for examination, treatment, and emergency areas where cool, color-corrected light is needed.

Ceiling mounted surgical light. Consists of a single lamp head up to 24" in diameter depending on the manufacturer. Unit provides heat filtered, color corrected light. Most lights require a minimum ceiling height of 8 feet 2 inches; check manufacturers' specific recommendations. Light head is in a movable yoke attached to a column hanging from the ceiling. For minor surgery and obstetrical procedures. Physical dimensions refer to the retracted light; one length of the dual swing arm around the center mount for width and depth and the height is the combined lamp head and folded arms height.

The Next conference tables range from small meeting rooms to large conference rooms. The table, with its light expression makes the design furnishing friendly and fits different types of chairs and setups. Next Conference tables are available with integrated cable well (C-box) that facilitates the latest in technology. The table design is ideal for customization in shape, surfaces and sizes. The design of the base, facilitates easy cleaning. The Next Conference Table is designed by Torsteinsen Design. Table top in 25mm MDF white HPL laminate with sloping profile and grey side list in ABS plastic (RAL 7012). or: Table top in 25mm MDF light gray HPL laminate with sloping profile and grey side list in ABS plastic similar to laminate with rounded corners. Other sizes / geometries on request. Next Conference is available with or without C-Box. C-box contains 4 el. sockets, 4 data connectors, 2 USB connectors, 1 HDMI connectors, 1 VGA connectors, 1 audio connectors. Outside measurement are 62x16,5 cm C-box is only sold along with a Fora Form table Table sold complete. Base in polished stainless steel. T-leg or corner legs. Next no.11 with T-foot, use X-leg as center column. Adjustable plastic gliders. Dimensions: 240x120 cm H: 72 cm 300x120 cm H: 72 cm Other sizes / geometries on request.

The Up sofa system was designed by Knudsen, Berg and Hindenes for the talk show ‘Senkveld’ on Norwegian TV2. The idea was to design a modular sofa system with a pure simple shape. The solid construction is ideal for sitting on the backrest, and invites to informal sitting positions. The sofa system can be placed in the center of the room. The versatile module system can be easily adapted to different interiors with a wide range of upholstery options, and different bases. Dimensions: 1 seat w / back W: 74 cm H: 75 cm D: 85 cm SH: 43 cm 2 seats w / back W: 144 cm 3 seats w / back W: 214 cm 3 seats w / back curved W: 214 cm 1 seat wo/ back W: 74 cm D: 81 cm SH: 46 cm 2 seats wo/ back W: 144 cm 3 seats wo/ back W: 214 cm 3 seats curved W: 212 cm

Wall-mounted basin mixer, projection 175 mm, center to center dimension 153 mm, with fittings

Wall-mounted basin mixer, projection 225 mm, center to center dimension 153 mm, with fittings

Shower mixer, center to center dimension 153 mm, with fittings, with accessories

Shower mixer, center to center dimension 153 mm, without fittings, without accessories

Shower mixer, center to center dimension 153 mm, without fittings, without accessories

Thermostatic shower mixer, center to center dimension 153 mm, without fittings, without accessories, outlet on bottom

Thermostatic shower mixer, center to center dimension 153 mm, without fittings, without accessories, outlet on top

Single-lever washbasin mixer - Standard model - with C3 model water and energy efficient cartridge - (lever in center position = cold water). - Temperature limiter ring, - water-saving feature: sensitive flow, - Flow rate : 11 l/mn.

Single-lever washbasin mixer - Standard model - with C3 model water and energy efficient cartridge (lever in center position = cold water) - temperature limiter ring, - water-saving feature: sensitive flow, - maximum flow rate 11 l/mn.

The sun protection control center is the heart of the Griesser KNX control. The flexible concept enables individual controls to be fitted to form an extensive sun protection automation system in large systems. The benefit of this is that all key automatic programs can be managed centrally, enabling the dependences between automatic timers, automatic temperature functions and automatic sun control to be easily set up. Communication with the motor control via the KNX Griesser product makes for quick, reliable and easy programming and commissioning. The Griesser object links the central unit with all motor controls via a group address.

This product is only available for the Swedish market. Alterna Fixtures are available in the following variables: Alterna WC and bidet fixture for wall-hung WC with tank or bidet. Universal model suitable for WC with center bolt 230 and 180 mm. The fixture have different bolt-heights, which allows for multiple seat heights, depending on the WC that well be installed. Alterna Washbasin fixtures for bolt and bracket washbasin. Universal model that fits most standard washbasins on the market. Available as a fixed as well as adjustable model. C/c measures for wash basin: Bolt distance, c / c: 150/200/280/352 mm (150 mm must be supplemented with nuts, other bolt distances have prepared nuts in the plate) Console hole, c/c distance of fixture: 375/425/510 mm

This product is only available for the Swedish market. Alterna Fixtures are available in the following variables: Alterna WC and bidet fixture for wall-hung WC with tank or bidet. Universal model suitable for WC with center bolt 230 and 180 mm. The fixture have different bolt-heights, which allows for multiple seat heights, depending on the WC that well be installed. Alterna Washbasin fixtures for bolt and bracket washbasin. Universal model that fits most standard washbasins on the market. Available as a fixed as well as adjustable model. C/c measures for wash basin: Bolt distance, c / c: 150/200/280/352 mm (150 mm must be supplemented with nuts, other bolt distances have prepared nuts in the plate) Console hole, c/c distance of fixture: 375/425/510 mm

M1 / M3 shower rod, 100 mm diameter handshower with anti-scale system. Flow reducer at 8 l / min. 720 mm wall rail with diameter 21 mm. Wall brackets with variable center distance from 675 to 550 mm. Shower holder with pressure sliding. Idealflex flexible hose, made of plastic with a metallic effect, from 1750 mm. Transparent soap dish.

Advanced Touch Screen Control A Crestron® touch screen offers an ideal user-interface for controlling all the technology in your home, boardroom, classroom, courtroom, or command center. Touch screens simplify and enhance the way you use technology, doing away with those piles of remote controls, cluttered wall switches, disparate smartphone apps, and cryptic computer screens. For controlling audio, video, lighting, shades, HVAC, security, and other systems, Crestron touch screens are fully-customizable with easy-to-use controls and icons, true feedback and real-time status display, full-motion video windows, and a full-featured media player for an enhanced multiroom entertainment experience.   The Crestron TS-1542 delivers the ultimate touch screen experience — blending style and function with advanced high-definition graphics. In one slim device, the TS-1542 integrates a brilliant 15.6” Full HD touch screen display and high-performance digital graphics engine. Its sleek, modern design features premium metallic construction and edge-to-edge glass for a contemporary look that’s perfectly at home placed on an executive boardroom table, installed in a high-tech command center, or mounted on the wall in a luxury residence. Featuring enhanced Smart Graphics™ performance and dual-window HD streaming video display, the TS-1542 delivers an elegant and powerful touch screen control solution for a wide range of applications. Additional features include the abilities to control any function using voice commands, browse the Internet, annotate over a video image or whiteboard screen, and communicate using built-in VoIP intercom and phone functions.[1] Single-wire PoE+ connectivity and a choice of tabletop, wall, or VESA mounting options afford an integrator-friendly solution that’s easy to install and fits perfectly in any space. Standard finishes include either white or dark gray metallic, or choose the Signature Series option to design your own custom finish. Sleek, Versatile Design At just 1-3/4 inches (45 mm) deep, the TS-1542 can be mounted virtually anywhere using the supplied wall mount kit or a third-party VESA 100 compliant mounting arm, bracket, or stand. A tabletop tilt model (TS-1542-TILT) is also offered, which features an ultra-stylish, smooth-tilt base for use on a table, desk, podium, or countertop.   TS-1542 Signature Series The Signature Series allows the TS-1542 to be transformed into a beautiful showpiece adorned with custom colors and graphics on the tilt base and rear of the touch screen. No design is off limits, as Crestron provides the means for design ideas to be submitted, rendered for approval, and then made real. For more information, please visit: www.crestron.com/signatureseries.   Smart Graphics™ Crestron touch screens use Smart Graphics to deliver the ultimate user experience and the ultimate value by enabling the creation of dynamically rich user interfaces with incredible efficiency and unparalleled functionality. Using Smart Graphics, programmers can swiftly integrate fluid gesture-driven controls, animated feedback, rich metadata, embedded apps and widgets, and full-motion video for a deeply engaging and ultra-intuitive touch screen experience. Crestron Smart Graphics offers these enhancements and more: Cool-looking graphical buttons, sliders, knobs, and gauges that are intuitive and fun to use Kinetic effects to enhance the feeling of realism, with lists and toolbars that scroll with momentum at the flick of a fingertip Drag-and-drop objects that snap into place, offering an easy way to switch sources Dashboard widgets to personalize the touch screen with clocks, weather, news, and other information [1] A power-saving screensaver that can display the time, temperature, and other text content at a reduced brightness level Customizable themes allowing a completely different look and feel for every user, event, or season Fully-developed SmartObjects® that enable sophisticated control over complex devices with minimal programming A consistent look and feel across multiple touch screens of varying sizes Auto-Brightness Control The TS-1542 maintains optimal visibility under varying lighting conditions by automatically adjusting its display brightness according to changes in the ambient light level in the room. HD Streaming Video High-definition streaming video capability makes it possible to view security cameras and other video sources right on the touch screen. Up to two video windows can be displayed simultaneously. Native support for H.264 and MJPEG formats allows the TS-1542 to display live streaming video from IP cameras, streaming encoders (Crestron CEN-NVS200, DM-TXRX-100-STR, or similar [2]), and DigitalMedia™ switchers. Video is delivered to the touch screen over Ethernet, eliminating the need for any extra video wiring. Voice Recognition Some things are easier said than done, so why not just say what you want and let Crestron do it for you? With built-in voice recognition, the TS-1542 provides the ability to use spoken commands to control virtually anything. Voice recognition can be used to quickly turn devices on or off, select and play a specific media title or playlist, change the channel, choose a lighting scene, lock the doors, arm the security system, or enter a password. Simply say a command and Crestron does the rest.[1] Rava® SIP Intercom Rava SIP Intercom Technology enables hands-free VoIP communication with other Rava-enabled touch screens and door stations. Rava works over Ethernet, supporting 2-way intercom, video intercom [3], and paging without requiring any special wiring. VoIP phone capability is also possible through integration with a SIP-compatible IP phone system or SIP server, allowing hands-free telephone functionality complete with speed-dialing, caller ID, custom ringers, and other enhancements. Built-in echo cancellation affords full-duplex performance for clear, seamless voice communication. Speakers and Microphone The built-in speakers and microphone provide clear audio for intercom and phone calls, as well as for listening to multimedia. Audio Feedback Customized audio files can be loaded to add another dimension to the touch screen graphics using personalized sounds, button feedback, and voice prompts. Web Browsing Using its built-in web browser, the TS-1542 provides quick access to online program guides and other web-based services at the touch of a button, allowing enhanced touch screen control of DVRs and other appliances without having to pick up a separate tablet or smartphone. If a device can be controlled or managed through a web browser, it can be integrated into the Crestron system through the TS-1542. Of course, the web browser may also be used to simply browse the Internet, watch online videos, and check up on social media.[1] Multi-Touch Support The TS-1542’s capacitive touch screen affords enhanced capabilities for browsing web pages using multi-touch gestures. Keyboard Options Typing in passwords, URLs, and text searches is facilitated using the on-screen multi-language keyboard. A physical USB keyboard (not included) may also be connected. Built-in Annotation Whether conducting a high-level boardroom meeting or training seminar, sharing ideas in a huddle space, or watching sports in your home theater, annotation helps put the fine point on any presentation. Annotation provides the ability to illustrate your thoughts on-the-fly, letting you draw and write over streaming video and computer images, and sketch out ideas on a whiteboard screen. Native to the TS-1542, remote annotation capability allows multiple participants, each with a separate touch screen, to draw with their fingertips over the same video image or whiteboard, enabling enhanced collaboration in a classroom, courtroom, or council chamber. Adding a Crestron Digital Graphics Engine (model DGE-100 [2]) connected to the room’s main display allows the whole annotation session to be viewed by the entire audience. Single-Wire Connectivity A simple Ethernet LAN connection with PoE+ is all that is required to wire the TS-1542, containing all control, video, intercom, and power signals within a single wire. If the LAN does not support PoE+, the TS-1542 may be powered using the supplied 100-240V power pack or 24VDC Cresnet® power.[4] Power over Ethernet Using PoE+ technology, the TS-1542 can get its operating power right through the LAN wiring. PoE (Power over Ethernet) eliminates the need for a local power supply or any dedicated power wiring. To supply PoE+ to a network of TS-1542 touch screens and other devices, Crestron offers the CEN-SWPOE-16 16-Port Managed PoE Switch.[2] Interface Module Each TS-1542 ships with a compact interface module (TS-1542-IMCW), which may be used as required to provide an RJ45 LAN connection for the touch screen. The module can be mounted in a 1-gang electrical box or floor box, under a table, or in a podium or equipment rack. A 6 foot (1.8 meter) long LAN cable is included for connection between the module and touch screen. NOTE: When surface mounted using the wall mount kit (included with models TS-1542-B-S and TS-1542-W-S only), all wiring enters through an electrical box or cut-out and is concealed from view. For this method of installation, the interface module may not be required. Notes: 1. Voice recognition, web browsing, weather information, and certain other functions require an Internet connection. 2. Item(s) sold separately. 3. H.264 compatible IP camera required. 4. Connection to a Cresnet network or power supply is for power only. Does not support Cresnet data communications. 5. Supports up to two simultaneous streaming inputs with a maximum combined total bitrate of 25 Mbps.

The DM-DGE-200-C Digital Graphics Engine transforms an HD or Ultra HD touch screen display into an advanced Crestron® controller. Featuring Crestron Smart Graphics™ technology, the DM-DGE-200-C provides for the creation of a completely custom graphical environment combining advanced controls for audio & video, lighting, shades, HVAC, security, and other functions with dual-window video display, annotation, audio feedback, and web browsing. Its low-profile, surface-mountable design allows for a discreet installation behind a flat-panel display, under a table, or inside a lectern or equipment rack. Alternately, the DM-DGE-200-C offers an enhanced presentation and productivity solution for meeting rooms and huddle spaces using Crestron PinPoint™ UX technology. Without requiring a touch screen or any other controls or programming, PinPoint UX leverages the room’s display to create an intelligent meeting space seamlessly integrated as part of a complete Crestron Fusion® Cloud managed enterprise. The DM-DGE-200-C features a 4K UHD capable HDMI® output for connection to the display device, and includes a USB HID port for touch, mouse, and/or keyboard input. Additional control ports are provided to enable control of the display device and other equipment.[1,2] A single HDMI input allows an AirMedia® wireless presentation gateway or other high-definition video source to be connected and displayed on screen. A DM 8G+® input is included to support 4K UHD and DCI 4K sources connected at a DM® transmitter or switcher.[3] Additionally, H.264 streaming video signals can be received over a high-speed Ethernet connection.[4] Ethernet also provides the interface to a Crestron control system, which is required for touch screen and OSM control applications.[5]   PinPoint™ UX The DM-DGE-200-C takes any meeting room or huddle space display device to a higher level, enhancing its usability while eliminating the need for any other AV or control equipment in the room. Built-in PinPoint UX technology works with Crestron Fusion Cloud and the PinPoint app to provide an intelligent meeting space that greets attendees with useful on-screen information and facilitates BYOD presentation without the need for a touch screen, button panel, or remote. As attendees enter the room, the personalized welcome screen provides essential details about the current scheduled meeting along with simple instructions to guide presenters through connecting their mobile devices and starting the presentation. As the meeting progresses, gentle notifications appear periodically to indicate how much time is left in the meeting and what’s scheduled next for the room. Pop-up messages may also appear prominently on screen, sent from Fusion, in the event of an emergency or other important announcement. With PinPoint UX, system operation is essentially invisible. Simply connecting a laptop, tablet, or other presentation source causes the video inputs to switch and the display to turn on (if not already on). Sources can be connected via a wired interface or wirelessly via Crestron AirMedia.[6] The display can also be scheduled to turn on and off at set times. The status of the display and any connected devices is reported to Fusion to enable monitoring and logging of equipment usage, and notification if a device is powered off or disconnected. Complete setup and configuration of PinPoint UX is performed through a simple web browser interface or through Fusion, with the ability to configure many PinPoint UX devices at once over the network. Note: PinPoint UX may be used without Crestron Fusion Cloud to provide a simple standalone meeting room presentation solution with customizable welcome screen and automatic operation. PinPoint UX also supports direct integration with Microsoft® Exchange Server.   Touch Screen Interface For traditional touch screen control applications, the DM-DGE-200-C pairs perfectly with a Crestron TSD-2220 HD Touch Screen Display to deliver a high-definition 21.5” touch screen control panel that’s ideal for home automation, corporate multimedia presentation, and command center applications. Third-party touch screens of varying sizes can be used with the DM-DGE-200-C to fulfill a range of control, collaboration, video display, and interactive kiosk solutions. The DM-DGE-200-C currently supports either Full HD 1080p60 (1920x1080@60Hz) or 4K UHD (3840x2160@30Hz) display resolutions. OSM Interface On-screen menu (OSM) capability offers an alternative to touch screen control, enabling a fully-customizable control menu to appear on any TV or video display, with simple navigation provided using the same Crestron handheld remote that’s controlling the TV. A USB mouse may also be used. The DM-DGE-200-C delivers stunning menu graphics that pop up unobtrusively at the edge of the screen alongside the video image, letting you quickly adjust lighting and climate control settings, lower the shades, check security system status, and lock or unlock the front door without interrupting the movie or TV program you’re watching. Detailed alert messages can also appear on screen in case of a security alarm, doorbell, or other event. You can even pop up a live streaming camera window to see who’s at the door or coming up the driveway. Smart Graphics™ The DM-DGE-200-C uses Smart Graphics to deliver the ultimate user experience and the ultimate value by enabling the creation of dynamically rich user interfaces with incredible efficiency and unparalleled functionality. Using Smart Graphics, programmers can swiftly integrate fluid gesture-driven controls, animated feedback, rich metadata, embedded apps and widgets, and full-motion video for a deeply engaging and ultra-intuitive touch screen experience. Crestron Smart Graphics offers these enhancements and more: Cool-looking graphical buttons, sliders, knobs, and gauges that are intuitive and fun to use Kinetic effects to enhance the feeling of realism, with lists and toolbars that scroll with momentum at the flick of a fingertip Drag-and-drop objects that snap into place, offering an easy way to switch sources Dashboard widgets to personalize the touch screen with clocks, weather, news, and other information [7] A power-saving screensaver that can display the time, temperature, and other text content at a reduced brightness level Customizable themes allowing a completely different look and feel for every user, event, or season Fully-developed SmartObjects® that enable sophisticated control over complex devices with minimal programming A consistent look and feel across touch screens of varying sizes Notes: 1. When using the PinPoint UX application without a control system, the onboard RS-232 COM port supports basic on/off power control of a single display device and the IR port is not utilized. The COM and IR ports may all be utilized for fully-customizable control applications through integration with a Crestron control system with custom programming. 2. When using the PinPoint UX application without a control system, CEC may be utilized at the HDMI output to provide basic on/off power control of a single display device. CEC may be utilized through either HDMI port for fully-customizable control applications through integration with a Crestron control system with custom programming. 3. When using the PinPoint UX application without a control system, if a DM 8G+ transmitter is connected, the transmitter’s input switching capability is limited to auto-switching mode and any control ports on the transmitter are disabled. Manual switching and control port functionality on the transmitter require a control system with custom programming. Control port functionality is not supported at all on a DM-TX-4K-100-C-1G transmitter. 4. Supports up to two simultaneous streaming video inputs with a maximum combined total bitrate of 25 Mbps. Streaming video input is not supported using the PinPoint UX application unless connected to a Crestron control system with custom programming. 5. When connected to a DM switcher via DM 8G+, the DM-DGE-200-C can obtain its LAN connection through the switcher but does not receive an IP address on the switcher’s private network. Thus, it requires an IP address on the customer’s LAN. 6. AirMedia wireless presentation support requires a wireless LAN and the addition of an AirMedia presentation gateway, model AM-101, sold separately. 7. Web browsing, weather information, and certain other functions require an Internet connection. 8. The maximum cable length for DigitalMedia 8G+ (DM 8G+) is dependent upon the type of cable, resolution of the video signal, and capabilities of each connected device. Refer to the “DM 8G+ Maximum Cable Lengths” table for a detailed overview. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for DM system design guidelines. All wire, cables, transmitters, and other devices are sold separately. 9. The audio signal from any source connected to the HDMI or DM input is passed through to the HDMI output without processing, downmixing, volume control, or mute control. 10. The HDMI video input signal cannot be downscaled by more than 4x. For instance, a 1920x1080 source signal can be displayed no smaller than 480x270 pixels. 11. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.

Advanced Touch Screen Control A Crestron® touch screen offers an ideal user-interface for controlling all the technology in your home, boardroom, classroom, courtroom, or command center. Touch screens simplify and enhance the way you use technology, doing away with those piles of remote controls, cluttered wall switches, disparate smartphone apps, and cryptic computer screens. For controlling audio, video, lighting, shades, HVAC, security, and other systems, Crestron touch screens are fully-customizable with easy-to-use controls and icons, true feedback and real-time status display, full-motion video windows, and a full-featured media player for an enhanced multiroom entertainment experience.   The Crestron TS-1542-C delivers the ultimate touch screen experience — blending style and function with advanced high-definition graphics. In one slim device, the TS-1542-C integrates a brilliant 15.6” Full HD touch screen display and high-performance digital graphics engine. Its sleek, modern design features premium metallic construction and edge-to-edge glass for a contemporary look that’s perfectly at home placed on an executive boardroom table, installed in a high-tech command center, or mounted on the wall in a luxury residence. Featuring enhanced Smart Graphics™ performance and dual-window HD video display, the TS-1542-C delivers an elegant and powerful touch screen control solution for a wide range of applications. Its DM 8G+® input provides a single-wire interface carrying high-speed Ethernet, uncompressed 4K video, H.264 streaming video, and PoDM++ power, all over a single CAT type cable. Additional features include the abilities to control any function using voice commands, browse the Internet, annotate over a video image or whiteboard screen, and communicate using built-in VoIP intercom and phone functions.[1] A choice of tabletop, wall, or VESA mounting options afford an integrator-friendly solution that’s easy to install and fits perfectly in any space. Standard finishes include either white or dark gray metallic, or choose the Signature Series option to design your own custom finish. Sleek, Versatile Design At just 1-3/4 inches (45 mm) deep, the TS-1542-C can be mounted virtually anywhere using the supplied wall mount kit or a third-party VESA 100 compliant mounting arm, bracket, or stand. A tabletop tilt model (TS-1542-TILT-C) is also offered, which features an ultra-stylish, smooth-tilt base for use on a table, desk, podium, or countertop.   TS-1542-C Signature Series The Signature Series allows the TS-1542-C to be transformed into a beautiful showpiece adorned with custom colors and graphics on the tilt base and rear of the touch screen. No design is off limits, as Crestron provides the means for design ideas to be submitted, rendered for approval, and then made real. For more information, please visit: www.crestron.com/signatureseries.   Smart Graphics™ Crestron touch screens use Smart Graphics to deliver the ultimate user experience and the ultimate value by enabling the creation of dynamically rich user interfaces with incredible efficiency and unparalleled functionality. Using Smart Graphics, programmers can swiftly integrate fluid gesture-driven controls, animated feedback, rich metadata, embedded apps and widgets, and full-motion video for a deeply engaging and ultra-intuitive touch screen experience. Crestron Smart Graphics offers these enhancements and more: Cool-looking graphical buttons, sliders, knobs, and gauges that are intuitive and fun to use Kinetic effects to enhance the feeling of realism, with lists and toolbars that scroll with momentum at the flick of a fingertip Drag-and-drop objects that snap into place, offering an easy way to switch sources Dashboard widgets to personalize the touch screen with clocks, weather, news, and other information [1] A power-saving screensaver that can display the time, temperature, and other text content at a reduced brightness level Customizable themes allowing a completely different look and feel for every user, event, or season Fully-developed SmartObjects® that enable sophisticated control over complex devices with minimal programming A consistent look and feel across multiple touch screens of varying sizes Auto-Brightness Control The TS-1542-C maintains optimal visibility under varying lighting conditions by automatically adjusting its display brightness according to changes in the ambient light level in the room. DigitalMedia 8G+® & 4K Video Using DM 8G+ technology, the TS-1542-C achieves complete connectivity over a single CAT type twisted pair cable. The cable connects to a Crestron DM® system (i.e., a DM switcher or transmitter [2,3]), which can be located in a central equipment cabinet or some other remote location. The DM system provides the interface for all video, audio, and networking signals to the TS-1542-C. Power for the TS-1542-C can also be carried over the DM 8G+ connection by adding a PoDM++ compatible power source.[4] The DM 8G+ connection transports high-speed Ethernet, uncompressed 4K video, and stereo audio signals from the DM system to the TS-1542-C. Support for 4K video and HDCP 2.2 encryption ensures compatibility with a complete range of video sources. Any video source connected to the DM system, including 4K and Ultra HD sources, can be viewed right on the touch screen, either full screen or in a window. DM 8G+ supports 1080p, WUXGA, and 2K signals over cable lengths up to 330 feet (100 m) using Crestron DM Ultra or DM 8G Cable, or third-party CAT5e. Higher resolutions up to UHD and 4K are supported at distances up to 330 feet (100 m) using DM Ultra Cable, 230 feet (70 m) using DM 8G Cable, or 165 feet (50 m) using CAT5e.[5] HD Streaming Video High-definition streaming video capability makes it possible to view live streaming video from IP cameras and streaming encoders (Crestron CEN-NVS200, DM-TXRX-100-STR, DMC-STRO, or similar [2]). Up to two streaming video windows can be displayed simultaneously, or a single streaming window can be displayed alongside a DM 8G+ video window. H.264 and MJPEG streaming formats are supported. Voice Recognition Some things are easier said than done, so why not just say what you want and let Crestron do it for you? With built-in voice recognition, the TS-1542-C provides the ability to use spoken commands to control virtually anything. Voice recognition can be used to quickly turn devices on or off, select and play a specific media title or playlist, change the channel, choose a lighting scene, lock the doors, arm the security system, or enter a password. Simply say a command and Crestron does the rest.[1] Rava® SIP Intercom Rava SIP Intercom Technology enables hands-free VoIP communication with other Rava-enabled touch screens and door stations. Rava works over Ethernet, supporting 2-way intercom, video intercom [6], and paging without requiring any special wiring. VoIP phone capability is also possible through integration with a SIP-compatible IP phone system or SIP server, allowing hands-free telephone functionality complete with speed-dialing, caller ID, custom ringers, and other enhancements. Built-in echo cancellation affords full-duplex performance for clear, seamless voice communication. Speakers and Microphone The built-in speakers and microphone provide clear audio for intercom and phone calls, as well as for listening to multimedia. Audio Feedback Customized audio files can be loaded to add another dimension to the touch screen graphics using personalized sounds, button feedback, and voice prompts. Web Browsing Using its built-in web browser, the TS-1542-C provides quick access to online program guides and other web-based services at the touch of a button, allowing enhanced touch screen control of DVRs and other appliances without having to pick up a separate tablet or smartphone. If a device can be controlled or managed through a web browser, it can be integrated into the Crestron system through the TS-1542-C. Of course, the web browser may also be used to simply browse the Internet, watch online videos, and check up on social media.[1] Multi-Touch Support The TS-1542-C’s capacitive touch screen affords enhanced capabilities for browsing web pages using multi-touch gestures. Notes: 1. Voice recognition, web browsing, weather information, and certain other functions require an internet connection. 2. Item(s) sold separately. 3. The DM device to which the TS-1542-C is connected must have an Ethernet connection to a Crestron control system. 4. Optional PoDM++ injector, model DM-PSU-ULTRA-MIDSPAN, sold separately. Any wiring carrying PoDM is for intra-building use only and should not be connected to a line that runs outside of the building in which the PoDM PSE (power sourcing equipment) is located. 5. The maximum cable length for DigitalMedia 8G+ (DM 8G+) is dependent upon the type of cable and resolution of the video signal. Refer to the “DM 8G+ Maximum Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete DM system design guidelines. All wire and cables are sold separately unless noted otherwise. 6. H.264 compatible IP camera required. 7. Connection to a Cresnet network or power supply is for power only. Does not support Cresnet data communications. 8. Supports up to two simultaneous streaming inputs with a maximum combined total bitrate of 25 Mbps.

<p>Crestron® MPC is a family of 2-Series control systems designed for installation in a wall or podium. Perfect for classrooms, meeting rooms, lecture halls, and training facilities, the MPC-M5 provides a fully-programmable user interface featuring an attractive and intuitive layout of pushbuttons with customizable backlit labeling and wireless remote capability.</p> <p>Available in white or black, the MPC-M5 is constructed to handle the rigors of everyday use in a corporate or educational environment. An assortment of programmable control ports provides for interfacing with AV equipment, lighting, shades, screens, and other room devices. Ethernet connectivity allows for integration with Crestron Fusion® Cloud as part of a complete managed enterprise solution.</p> <p>Control Simplified<br>The MPC-M5 is engineered to be easy to integrate and use, yet versatile enough to suit each application perfectly. Its 10 programmable “hard key” buttons can be freely programmed for system power, input source selection, transport control, volume adjustment, lighting presets, and any other functions. Custom backlit labeling of the buttons is facilitated using an assortment of pre-printed labels or Crestron Engraver software.</p> <p>Wireless Remote<br>A range of options is available for adding wireless remote control to the MPC system. Its built-in IR receiver allows the use of any Crestron or third-party IR remote that supports RC-5 commands. Adding a CEN-GWEXER wireless gateway enables support for Crestron infiNET EX® and ER wireless remotes and touch screens.[1]</p> <p>Built-in Control Ports<br>Through its onboard control ports, the MPC-M5 interfaces directly with the video display or projector, projection screen, lift, occupancy sensors, and other devices in the room. In addition to high-speed Ethernet, there is a bidirectional RS-232 COM port, an IR/serial port, two relays, and two digital input ports right on the rear panel.</p> <p>Power over Ethernet<br>Using PoE technology, the MPC-M5 gets its operating power right through the LAN wiring. PoE (Power over Ethernet) eliminates the need for a local power supply or any dedicated power wiring. A PoE Injector (PWE-4803RU [1]) simply connects in line with the LAN cable at a convenient location. Crestron PoE switches (CEN-SW-POE-5 or CEN-SWPOE-16 [1]) may also be used to provide a total networking solution with built-in PoE.</p> <p>Crestron Fusion® and SNMP<br>As part of a complete managed network in a corporate enterprise, college campus, convention center, or any other facility, the MPC-M5 works integrally with Crestron Fusion Cloud to enable remote scheduling, monitoring, and control of rooms and technology from a central help desk. Built-in SNMP support enables integration with third-party network management software, allowing control and monitoring in a format that's familiar to IT personnel.</p> <p>Features<br>Summary Of Features </p> <p>Wall mount Crestron® 2-Series control system<br>10 programmable buttons with LED feedback<br>Customizable backlit button labels<br>Built-in IR receiver<br>RS-232, IR, 2 input, & 2 relay control ports<br>10/100 Ethernet<br>PoE network powered<br>Crestron Fusion® and SNMP remote management<br>Available in white or black<br>2-gang wall box mountable</p> <p>Notes: <br>1. Item(s) sold separately.</p>

<p>The Saros® SB-200-P is a stereo sound bar designed to provide enhanced audio performance for a flat panel display. Its full-range, front-firing speakers offer an improvement over the small, rear-facing speakers typical of many display devices. The bracket included with the sound bar allows for attachment to a wall surface, or the unit can be placed on a shelf below or above the display.</p> <p>Built-in amplification allows for direct connection to the line-level audio output of the display device, or to the output of an audio preamp, switcher, mixer, tv tuner, codec, or Crestron DM® receiver.[1] The amplifier powers on automatically when an audio input signal is detected, and powers off if no signal is detected for several minutes.</p> <p>The SAROS SB-200-P sound bar is ideally suited for use with the Crestron RL® 2 Group Collaboration System and other unified communication and videoconferencing systems. It is equally well-suited for use in any small to medium sized room or public space in a hotel, restaurant, museum, medical center, airport, office building, or residence.</p> <p>FEATURES</p> <p>Summary Of Features<br>High-quality, full-range amplified stereo sound bar<br>Delivers enhanced sound quality and performance for use with any flat panel display<br>Mounts to a wall or sits on a shelf<br>Balanced or unbalanced stereo line-level audio input [1]<br>Unbalanced stereo audio cable included<br>Powers on and off automatically<br>100 to 240 Volt AC powered</p> <p>Notes:<br>1. The SAROS SB-200-P has a fixed input level. It must be connected to an audio source equipped with adjustable audio output level.</p>

The CityView carousel table with 36inch round steel table top provides clustered seating options with suspended seating mounted to the center post.

The CityView carousel table with 36inch square steel table top provides clustered seating options with suspended seating mounted to the center post.

The CityView carousel table with 48inch round steel table top provides clustered seating options with suspended seating mounted to the center post.

The CityView carousel table with 48inch square steel table top provides clustered seating options with suspended seating mounted to the center post.

The JordanCreek 36inch round carousel table provides clustered seating options for any patio setting. Chairs are permanently fixed to tables with support tubes that are suspended from the center post.

The JordanCreek 36inch square carousel table provides clustered seating options for any patio setting. Chairs are permanently fixed to tables with support tubes that are suspended from the center post.

The JordanCreek 48inch round carousel table provides clustered seating options for any patio setting. Chairs are permanently fixed to tables with support tubes that are suspended from the center post.

The JordanCreek 48inch square carousel table provides clustered seating options for any patio setting. Chairs are permanently fixed to tables with support tubes that are suspended from the center post.

<p>The flagship Crestron® PRO3 is an enterprise-class control system with an enhanced feature set including a front panel color LCD display, built-in control card expansion slots, and a dedicated Control Subnet port. Featuring the 3-Series® control engine, the PRO3 forms the core of any modern networked home or commercial building, managing and integrating all the disparate technologies throughout your facility to make life easier, greener, more productive, and more enjoyable.<br></p><p> <br>3-Series® Control Systems<br>Today's commercial buildings and custom homes comprise more technology than ever before, and all these systems need to be networked, managed, and controlled in fundamentally new ways. The IP based 3-Series platform is engineered from the ground up to deliver a network-grade server appliance capable of faithfully handling everything from boardroom AV and home theater control to total building management.</p> <p>3-Series embodies a distinctively robust, dynamic, and secure platform to elevate your system designs to higher levels of performance and reliability. Compared to other control systems, Crestron 3-Series provides a pronounced increase in processing power and speed with more memory, rock solid networking and IP control, and a unique modular programming architecture.<br> <br>Modular Programming Architecture<br>Designed for enhanced scalability, the PRO3 affords high-speed, real-time multi-tasking to seamlessly run multiple programs simultaneously. This exclusive modular programming architecture lets programmers independently develop and run device-specific programs for AV, lighting, shades, HVAC, security, etc., allowing for the optimization of each program, and allowing changes to be made to one program without affecting the whole. Even as your system grows, processing resources can easily be shifted from one 3-Series processor to another without rewriting any code. The end benefit is dramatically simplified upgradability with minimal downtime, whether implementing changes on site or remotely via the network.<br><br></p><p>Robust Ethernet & IP Control<br>IP technology is the heart of 3-Series, so it should be no surprise that its networking abilities are second to none. Gigabit Ethernet connectivity enables integration with IP-controllable devices and allows the PRO3 to be part of a larger managed control network. Whether residing on a sensitive corporate LAN, a home network, or accessing the Internet through a cable modem, the PRO3 provides secure, reliable interconnectivity with IP-enabled touch screens, computers, mobile devices, video displays, media servers, security systems, lighting, HVAC, and other equipment — whether on premises or across the globe.<br><br></p><p><br></p><p>Dedicated Control Subnet<br>The Crestron Control Subnet is a Gigabit Ethernet network dedicated to Crestron devices. Via the PRO3's Control Subnet port, an installer may simply connect a single touch screen or wireless gateway, or add a Crestron PoE switch (CEN-SW-POE-5 or CEN-SWPOE-16) [1] to handle multiple touch screens, gateways, AV components, and other devices. Auto-configuration of the entire subnet is performed by the PRO3, discovering each device and assigning IP addresses without any extra effort from the installer.<br>A separate LAN port on the PRO3 provides a single-point connection to the primary LAN, requiring just one IP address for the complete control system. The LAN port allows full interconnectivity between devices on the local subnet with other devices, systems, servers, and WAN/Internet connections outside the local subnet. For sensitive applications that require absolute security, the entire Control Subnet can be completely hidden from the primary LAN using Isolation Mode.<br><br></p><p>Control Apps & XPanel<br>Years ago, Crestron pioneered the world's first IP-based control system unleashing vast new possibilities for controlling, monitoring, and managing integrated systems over a LAN, WAN, and the Internet. Today, Crestron offers more ways than ever to control your world the way you want. Using a computer, smartphone, or tablet device, Crestron lets you control anything in your home or workplace from anywhere in the world.<br><br></p><p>Native to every 3-Series control system, Crestron XPanel technology transforms any laptop or desktop computer into a virtual Crestron touch screen. Crestron control apps deliver the Crestron touch screen experience to iPhone®, iPad®, and Android™ devices, letting you safely monitor and control your entire residence or commercial facility using the one device that goes with you everywhere.<br><br></p><p>Crestron Fusion® Cloud<br>Crestron Fusion Cloud provides an integrated platform for creating truly smart buildings that save energy, enhance worker productivity, and prolong the life-span of valuable equipment. As part of a complete managed network in a corporate enterprise, college campus, convention center, or any other facility, the PRO3 works integrally with Crestron Fusion Cloud to enable remote scheduling, monitoring, and control of rooms and technology from a central help desk. It also enables organizations to reduce energy consumption by tracking real-time usage and automating control of lighting, shades, and HVAC.<br><br></p><p>SNMP Support<br>Built-in SNMP support enables integration with third-party IT management software, allowing network administrators to manage and control Crestron systems on the network in an IT-friendly format.<br><br></p><p>Cresnet®<br>Cresnet provides a dependable network wiring solution for Crestron keypads, lighting controls, shade motors, thermostats, occupancy sensors, and other devices that don't require the higher speed of Ethernet. The Cresnet bus offers easy wiring and configuration, carrying bidirectional communication and 24VDC power to each device over a simple 4-conductor cable. To assist with troubleshooting, the PRO3 includes our patent-pending Network Analyzer which continuously monitors the integrity of the Cresnet network for wiring faults, marginal performance, and other errors.<br><br></p><p>Onboard Control Ports<br>In addition to Ethernet, the PRO3 includes six bidirectional COM ports and eight IR ports to interface directly with all of your centralized AV sources, video displays, and other devices. Eight programmable relay ports are included for controlling projection screens, lifts, power controllers, and other contact-closure actuated equipment. Eight "Versiport" I/O ports enable the integration of power sensors, motion detectors, door switches, alarms, or anything else that provides a dry contact closure, low-voltage logic, or 0-10 Volt DC signal.<br><br></p><p>Control Card Expansion Slots<br>Additional control ports can be added to the PRO3 using 3-Series Control Cards [1]. The PRO3 provides three control card expansion slots on its rear panel, affording great expansion capability without requiring any additional rack space.<br><br></p><p>Front Panel Color LCD Display<br>The PRO3's front panel includes a color LCD display to enable extensive setup and diagnostics without having to connect a computer.<br><br></p><p>BACnet™/IP<br>Native support for the BACnet/IP communication protocol provides a direct interface to third-party building management systems over Ethernet, simplifying integration with HVAC, security, fire & life safety, voice & data, lighting, shades, and other systems. Using BACnet/IP, each system runs independently with the ability to communicate together on one platform for a truly smart building.[2]<br>  <br><strong>Key Features</strong><br></p><ul><li>Enterprise-class control system</li><li>3-Series® Control Engine — substantially faster and more powerful than other control systems</li><li>Exclusive modular programming architecture</li><li>Onboard 1GB RAM & 4GB Flash memory</li><li>Expandable storage up to 1TB</li><li>Rear panel memory card slot</li><li>High-speed USB 2.0 host port</li><li>Industry-standard Ethernet and Cresnet® wired communications</li><li>Control Subnet — provides a dedicated local network for Crestron® devices</li><li>XPanel with Smart Graphics™ computer and web based control</li><li>iPhone®, iPad®, and Android™ control app support</li><li>Crestron Fusion® Cloud Enterprise Management Service support</li><li>SNMP remote management support</li><li>Two RS-232/422/485 COM ports with hardware and software handshaking</li><li>Four RS-232 COM ports with software handshaking only</li><li>Eight IR/serial, eight relay, and eight Versiport I/O ports</li><li>Three built-in 3-Series control card expansion slots</li><li>Programmable event scheduling with astronomical time clock</li><li>Native BACnet™/IP support [2]</li><li>IEC 61000-4-5 Installation Class 4 surge immunity on COM, Versiport, and network connections [3]</li><li>Installer setup via front panel, Crestron Toolbox™ software, or web browser</li><li>C#, symbol based, and drag-and-drop programming environments</li><li>Full Unicode (multi-language) support</li><li>Increased network throughput and security</li><li>Secure access through full user/group management or Active Directory integration</li><li>Hardware level security using 802.1X authentication</li><li>TLS, SSL, SSH, and SFTP network security protocols</li><li>FIPS 140-2 compliant encryption</li><li>IIS v.6.0 Web Server</li><li>IPv6 ready</li><li>Front panel color LCD display for setup and diagnostics</li><li>Front panel USB computer console port</li><li>2-space rack-mountable</li></ul><p></p> <p>1. Item(s) sold separately.<br>2. License required. The PRO3 supports a maximum of 2000 BACnet objects when dedicated for BACnet use only. Actual capabilities are contingent upon the overall program size and complexity.<br>3. The following connections comply with IEC 61000-4-5 Installation Class 4 surge immunity levels: COM 1 - 6, I/O 1 - 8, NET, LAN, and CONTROL SUBNET.</p>

<p>“On Point is designed to allow full contact between up to eight people around it, while it’s also perfect for more private and intimate gatherings among a few individuals It’s also a way of creating a micro architecture in the room, with the tree’s natural ceiling that makes us feel pleasantly enwrapped and comforted”, says Mattias Stenberg.</p><p>On Point High, has an upholstered frame with a table top in white-pigmented oak. The center module in the middle of the table top is in lacquered MDF. It is available in different dimensions and makes it possible to fit different sizes of plants into the table. The tables heights make it possible to choose between standing or sitting on a bar stool.</p><p><strong>Benefits & functions<br></strong>- Can be upholstered in fabric or leather.<br>- Can be equipped with a powerbox.<br>- It fits up to eight people.<br>- The center module is available in three different spaces, see images below<br></p>