Different types of WC with minimal space. Editable with MEP Modeler.

Different types of corner WC with minimal space. Editable with MEP Modeler.

Single slope steel frame with variable profile heights and optional bottom plate.

WedgeR.gsm - by TSB A radiused rectangular wedge primitive shape, with parameters for adjusting the slope of the top and bottom surfaces. 01-18-07: Initial version - Wedge.gsm, simple wedge with UI page. 08-04-09: Added radius capability. 08-06-09: Updated UI Page for radius parameter. 08-14-09: Added editable hotspots.3D parametric, WedgeR, curved wedge shape, with optional calculation by angle

Optional number of partition panels.

Double slope steel frame with variable profile heights and optional bottom plate.

Inclined steel column with variable profile heights and optional bottom and top plate.

Steel lean-to with variable profile heights and optional bottom plate.

#http://www.onland.info/archives/2005/05/slab_elev_jm9_l.php Thanks to Geoff Briggs. This is adapted from his Top of Wall label. He in turn credited Ben Hruska. Really flaky editing hotspots. the plan X & Y can't be paired, the section top/bottom switch vanishes half the time. Shrug. I left the separate plan ones in, better than nothing I commented out all the section switch stuff 2008-10-17: Changed strategy on the plan hotspots, now they work.2D parametric slab elevation marker

Different types of WC with minimal space. Editable with MEP Modeler.

Inclined steel column with variable profile heights and optional bottom and top plate.

Cistern LAUFEN PALACE, sanitary ceramic, dimensions 360 x 160 x 420 mm, Dual-Flush 6/3-l, water inlet bottom right 1/2” brass, Scandinavia Standard, matching floorstanding WC pan, order no. 82470.6/option 231, Further options: Surface refinement LCC (only white), Order no. 82870.5

Compact design 127 mm projection

Concealed cistern for back to wall WC

Compact design 127 mm projection

Compact design 127 mm projection

Compact design 127 mm projection

Shower mixer, center to center dimension 153 mm, without fittings, without accessories

Thermostatic shower mixer, center to center dimension 153 mm, without fittings, without accessories, outlet on bottom

Intakt 2+1 glass window is a modern window with aluminum-clad exterior. The window is side-hung and opened inwards. In that way it is suitable in urban and higher-house, where the requirements for sound insulation are high. The safety and durability is documented. There are many possibilities to customize and complement the window for the environment.

Contour 21 toilet seat no cover 305 mm high pan, bottom fixing hinges

Contour 21 toilet seat no cover 355 mm high pan, bottom fixing hinges

Contour 21 37 cm handrinse washbasin central taphole no overflow or chainstay hole, bottom outlet

Contour 21 schools cistern 6 litre valve cistern bottom supply

Contour 21 toilet seat & cover 355 mm high pan, bottom fixing hinges

Profile 21 close coupled cistern, 6/4 litre dual flush push button valve bottom supply and internal overflow

Sandringham 21 low level cistern 6 litre single flush syphon bottom supply and internal overflow

Concept arc delay fill 6/4 litre valve cistern bottom supply

Concept cube 6/4 litre valve cistern bottom supply,

Tempo close coupled delay fill, valve cistern 6/4 litre dual flush push button bottom supply and internal overflow

Concept arc delay fill 4/2.6 litre valve cistern bottom supply

Concept cube delay fill 4/2.6 litre valve cistern bottom supply

Concept space corner close coupled cistern 6/4 litre dual flush push button valve bottom supply and internal overflow.

Santorini bow cistern close coupled 6/4 litre dual flush valve bottom supply

Santorini Bow Cistern Close Coupled 4/2.6 Litre Dual Flush Valve Bottom supply

Intakt 2+1 glass window is a modern window with aluminum-clad exterior. The window is side-hung and opened inwards. In that way it is suitable in urban and higher-house, where the requirements for sound insulation are high. The safety and durability is documented. There are many possibilities to customize and complement the window for the environment.

Intakt 2+1 glass window is a modern window with aluminum-clad exterior. The window is side-hung and opened inwards. In that way it is suitable in urban and higher-house, where the requirements for sound insulation are high. The safety and durability is documented. There are many possibilities to customize and complement the window for the environment.

Intakt 2+1 glass window is a modern window with aluminum-clad exterior. The window is side-hung and opened inwards. In that way it is suitable in urban and higher-house, where the requirements for sound insulation are high. The safety and durability is documented. There are many possibilities to customize and complement the window for the environment.

Intakt 2+1 glass window is a modern window with aluminum-clad exterior. The window is side-hung and opened inwards. In that way it is suitable in urban and higher-house, where the requirements for sound insulation are high. The safety and durability is documented. There are many possibilities to customize and complement the window for the environment.

Intakt 2+1 glass window is a modern window with aluminum-clad exterior. The window is side-hung and opened inwards. In that way it is suitable in urban and higher-house, where the requirements for sound insulation are high. The safety and durability is documented. There are many possibilities to customize and complement the window for the environment.

Range 477 Tumbler with flat bottom - round tumbler with flat bottom - free-standing and suitable as insert for the small holder (477.00.100) - 80 mm high and 74 mm diameter - made of high-quality polyamide according to HEWI colour chart Article no.: HEWI 477.04.020

Optional number of partition panels.

Different types of corner WC with minimal space. Editable with MEP Modeler.

Double slope steel frame with variable profile heights and optional bottom plate.

Steel lean-to with variable profile heights and optional bottom plate.

Single slope steel frame with variable profile heights and optional bottom plate.

The Tork Xpress Countertop Interfold-Multifold Hand Towel Dispenser is a stylish countertop towel dispenser that adds a hygiene, upscale touch to restaurant restrooms. The dispenser utilizes a unique folded towel system with fully enclosed towels that delivers only one towel at a time, minimizing the risk of cross contamination while reducing waste and refilling expenses. The dispenser's attractive space-saving design is more appealing and less wasteful than a stack of loose towels, keeping countertops neat and creating an inviting impression. The Xpress Countertop Dispenser features a smooth surface for optimum hygiene, quick check refill indicator, easy access buttons for fast refills, the overfill protection and spring-loaded bottom improve dispensing and the anti-slip pads keep dispenser in place.

Complete toilet set : WC pan dual outlet, low cistern with dual push-button mechanism 3/4,5 litres, side inlet, fixed seat. Options: Low cistern with dual push-button mechanism 3/4,5 litres, bottom left inlet, soft closing seat.

The Tork Xpress Countertop Interfold-Multifold Hand Towel Dispenser is a stylish countertop towel dispenser that adds a hygiene, upscale touch to restaurant restrooms. The dispenser utilizes a unique folded towel system with fully enclosed towels that delivers only one towel at a time, minimizing the risk of cross contamination while reducing waste and refilling expenses. The dispenser's attractive space-saving design is more appealing and less wasteful than a stack of loose towels, keeping countertops neat and creating an inviting impression. The Xpress Countertop Dispenser features a smooth surface for optimum hygiene, quick check refill indicator, easy access buttons for fast refills, the overfill protection and spring-loaded bottom improve dispensing and the anti-slip pads keep dispenser in place.

Lunex zipscreen fullfilles the requirementes of EU- standard EN 13659 regarding wind and efficient sunshade. It has been testet to endure forces up to 400 Newton per m2 on most common window sizes. Lunex Zipscreen is made with half a zipper which is welded to the fabric on both sides. The zipper halfes is entered into plastic guides which leads the fabric inside the guiderails and leaves no gap for sunrays to leak trough. This is the big difference between a zipscreen and a traditional screen which have no other guidance than a weighted bottom profile and where in some cases light gaps are inevitably. Applications : Lunex Zipscreen can be used wherever the requirement is an effective sunshade and where high winds might be a challenge for a traditional screen. A zipscreen can withstand up to 20 m/s where as a traditional screen often has limits down to 8 m/s. Lunex Zipscreen meets the requirements of access to normal daylight while it provides an optimal shielding of unwanted glare. Product description : All vivble outer profiles are made of high quality extruded aluminum profiles which are powdercoated or anodized to withstand corrosion. Standard colors are anodized (similar to RAL 9006 silver grey) or RAL 9010 white. All other standard RAL colors available for a surcharge. Operation : Lunex Zipscreen is only available with electric motor drive operated by switch, remote or fully automated solar/wind systems.

[LIST] Horizontal sliding wall with double glazing and a surrounding frame made of thermally insulated profiles Different parking layouts available Bottom profile Thermal break and water channel (optional) Track rail with optional thermal break Insulation value U of approx. 1,5 W/m²K (with standard insulating glass) Meets the requirements of the German Energy Saving Ordinance EnEV Combined with door closer types TS 92, ITS 96 3-6, Push handles, ISEO Multilock Pivoting-sliding panels equipped with an ITS 96 3-6 concealed door closer Operation Easy, one-handed single throw of the lock bar to switch between the door and sliding functions, with no bending and no crank operation 40% improvement in thermal separation value (compared to the predecessor model) Heat transfer coefficient in accordance with DIN EN ISO 10077-1 and 10077-2 Endurance DIN 1527 Class 3 (25000 cycles) for suspend sliding doors > 100kg Impact DIN EN 13049 Class 3 Corrosion DIN EN 1670 Class 3 The product will be available end 2015 [/LIST]

[LIST] Horizontal Sliding Wall HSW EASY Safe, Standard Stacking Laminated safety glass with Clamp & Glue fixing technology Glass thicknesses from 10 to 19 mm Support profile for single-action and double-action pivoting-sliding panels with integrated slide channel Top rail can be optionally provided with an adhesive channel for the secure fixing of laminated safety glass Roller carrier mounting can be variably adjusted both at the support profile and at the door/glazing rail profile Combined with: Door Closers TS 92, ITS 96, ITS 96 2-4, BTS 80, BTS 84 Push handles, Office locks, center/corner locks, HSW-GP Double top and bottom brush seal profiles available Easy installation thanks to three-in-one multilock assembly Status indicator showing whether the panel is in the pivoting or sliding mode for enhanced safety The product will be available mid 2015. [/LIST]

[LIST] Energy saving automatic sliding door system DORMA's ST Flex Green satisfies the requirements of the latest energy-saving building regulations for England and Wales - Approved Document L (2010) while also harmonizing perfectly with the existing DORMA sliding door range. Ideal for Exterior doors, porch Max. system width 6250 mm Max. passage width 3000 mm Max. passage height 3000 mm Energy Efficiency EnEV 2014, UD-Values from 1,4 to max.1,8W/m²K Thermal Insulation EN ISO 10077 Drive DORMA ES 200, ES 200-D Durability Min. 1000000 cycles Escape Route ES 200-2D Certification Fabrication DIN ISO 9001, Environmental product declarations ISO 14025, DIN 18650 and EN 16005 Benefits are Excellent insulation features thanks to interlocking side seals and top and bottom seals, Suitable for use on emergency escape routes, Activation via radar, push pad or access control (further options on request) [/LIST]

With Elitfönster’s inward opening triple glazed window, you are offered a good insulation capability and efficient sound reduction giving you a good living comfort throughout the year. Exterior aluminium cladding for extra long durability making it virtually maintenance free. The freedom of choices and combinations is great. Window construction - Sidehung wooden window with an exterior aluminium cladding - Single sash with triple glazed isolation glass sealed unit - U value between 1,0 and 1,3 - Sound reduction between Rw 33 dB and Rw 41 dB - Available fire classes are E30, EW30, EI30 - Frame depth: 115 mm - Opening: sidehung or Kipp-Dreh* - Many possible combinations with opening and fixed windows in the same frame *Kipp-Dreh is a double-functioning fitting where the window is hung both on the side and at the bottom Please refer to Elitfönster's size matrixes for possible combinations with minimum and maximum constraints

Cistern LAUFEN MODERNA R, sanitary ceramic dimensions 380 x 175 x 400 mm Dual-Flush 6/3-l option 291 Dual-Flush 4,5/3-l option 753 (Green Version) water inlet bottom left (1/2“) matching floorstanding WC pan order no. 82454.1 and wall-hung WC pan order no. 82054.5 Special feature: without water condensation insulation Further options: Surface refinement LCC (only white) Order no. 82654.3

Tissue processing water bath. It has a sensitive thermostat providing regulation to +/-0.1 degree C., a temperature range from ambient to 72 degrees centigrade, black coating in chamber to provide visual contrast, fiberglass insulated sides and bottom and a dependable gravity convection.

Automated packager for inpatient unit dose pharmacy applications. The unit consists of an array of cells which hold pills and tablets. The system computer takes user instructions and directs the system to select the proper pill cell and dispense a tablet onto a plastic bottom sheet. At the same time, the system prints a plastic cover sheet for the pill which includes the type of pill and any facility specific coding necessary. The system then marries the two sheets (with the pill between them) and heat seals the sheets enclosing the pill. The system is designed to limit cross contamination by containing tablet dust and to alert the operator in case of malfunction. Several configurations are available depending on the size of the pharmacy and workload.

X-ray film illuminator approximately 20' H x 29' W x 6'' D. This is a double, wall mounted type unit with a continuous viewing surface. The tension film grips are adjustable top and bottom with standard grip strip. The unit's balanced-light viewing is assured by the 32W circular fluorescent lamp. It provides 500 feet candles of cool operation across the entire 14" X 17" viewing surface. It is available with or without film-activated switch. The unit can be used in hospitals, examining rooms, satellite office or lab.

The perfect external door. The Gilgen SLX-M sliding-door drive unit is a universally applicable drive system with the very latest functions. It is designed to offer guaranteed, reliable functioning in a wide range of highly demanding applications. It also offers elegant good looks, with its sensor components housed in the drive case. The Gilgen <green wings> PST profile system is the new name for a high performance thermal barrier with a slimline visible width. Heating and air conditioning costs are drastically reduced, which translates into the system's rapid return on investment. The range is completed with optional extras such as a drained bottom guide-way or automatic multi-point locking.

Cistern, Cistern LAUFEN PALACE, sanitary ceramic, dimensions 360 x 160 x 420 mm, Dual-Flush 6/3-l, water inlet bottom right 1/2” brass, Scandinavia Standard, matching floorstanding WC pan, order no. 82470.6/option 231, Further options: Surface refinement LCC (only white), Order no. 82870.5

Cistern Laufen-PALOMBA COLLECTION, sanitary ceramic dimensions 360 x 175 x 435 mm Dual-Flush 6/3-l option 291 Dual-Flush 4,5/3-l option 753 (Green Version) water inlet bottom left (1/2“) matching floorstanding WC pan, order no. 82480.6/option 231 Special feature: without water condensation insulation Further options: Surface refinement LCC (only white) Order no. 82880.3

Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with out socket, without sensor switch, left door , Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with out socket, without sensor switch, left door

Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with sockets EU, with sensor switch Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with sockets EU, with sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 2 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 6 glass shelves (adjustable) 3/3

Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with sockets CH, without sensor switch Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with sockets CH, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 2 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 6 glass shelves (adjustable) 3/3

Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with out socket, without sensor switch Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with out socket, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 2 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 6 glass shelves (adjustable) 3/3

Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with sockets EU, with sensor switch Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with sockets EU, with sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 2 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 6 glass shelves (adjustable) 3/3

Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with sockets CH, without sensor switch Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with sockets CH, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 2 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 6 glass shelves (adjustable) 3/3

Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with out socket, without sensor switch Mirror cabinet, aluminium, with 2 LED lighting elements and bottom ambient lighting, with out socket, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 2 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 2x 14W/m, 4000 Kelvin (daylight), IP44, 230V 6 glass shelves (adjustable) 3/3

Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements and bottom ambient lighting, with sockets EU, with sensor switch Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements and bottom ambient lighting, with sockets EU, with sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 3 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 4x 14W/m, 4000 Kelvin (daylight), IP44, 230V 8 glass shelves (adjustable) 3/2/3

Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements and bottom ambient lighting, with sockets CH, without sensor switch Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements and bottom ambient lighting, with sockets CH, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 3 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 4x 14W/m, 4000 Kelvin (daylight), IP44, 230V 8 glass shelves (adjustable) 3/2/3

Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements and bottom ambient lighting, with out socket, without sensor switch Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements and bottom ambient lighting, with out socket, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 3 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 4x 14W/m, 4000 Kelvin (daylight), IP44, 230V 8 glass shelves (adjustable) 3/2/3

Aluminium mirror cabinet with vertical LED light and ambient light, with socket EU, with sensor switch Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements and bottom ambient lighting, with sockets EU, with sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 3 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 4x 14W/m, 4000 Kelvin (daylight), IP44, 230V 8 glass shelves (adjustable) 3/2/3

Aluminium mirror cabinet with vertical LED light, ambient light and socket CH without sensor switch Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements and bottom ambient lighting, with sockets CH, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 3 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 4x 14W/m, 4000 Kelvin (daylight), IP44, 230V 8 glass shelves (adjustable) 3/2/3

Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements and bottom ambient lighting, with out socket, without sensor switch Mirror cabinet, aluminium, 3 double mirrored doors, with 4 LED lighting elements and bottom ambient lighting, with out socket, without sensor switch Body – Inner part anodized aluminum (sidewall top, bottom), back wall grey melamine coated MDF Doors – Glass 3+3 mm 3 doors, with inside and outside mirrors, including handles (optional usable) With vertical LED light 4x 14W/m, 4000 Kelvin (daylight), IP44, 230V 8 glass shelves (adjustable) 3/2/3

Cistern, water connection at the bottom Cistern LAUFEN PRO, sanitary ceramic dimensions 380 x 175 x 360 mm Dual-Flush 6/3-l option 286 Dual-Flush 6/3-l-flush or 4,5/3-l option 289 (Project Version) Dual-Flush 4,5/3-l option 752 (Green Version) water inlet bottom right 1/2” brass, Scandinavia Standard matching floorstanding WC pan, order no. 82495.5/option 231, 82495.6, 82495.7, 82495.8/option 231, 82495.9 Special feature: without water condensation insulation Further options: Surface refinement LCC (only white)

The inward opening window is a convenient window that can be provided with hinges in the side, bottom or both. The window with hinges in both the side and bottom is called Kipp-Dreh and can be opened in the top for easy and efficient ventilation, and inward opening that provides a great wash position. You stand inside and wash the outside of the glass. All opening functions are easy to operate with one hand. The window can be made as one, two or multi sash windows and often in combination with fixed frame window in the same unit. The window is available with a variety of glazing bars. The window is available in all types of glass or combination of glass such as self-cleaning, low energy, solar & thermal regulating, safety, noise reduced or decorative glass. U-values ​​down to 0.8.

The inward opening window is a convenient window that can be provided with hinges in the side, bottom or both. The window with hinges in both the side and bottom is called Kipp-Dreh and can be opened in the top for easy and efficient ventilation, and inward opening that provides a great wash position. You stand inside and wash the outside of the glass. All opening functions are easy to operate with one hand. The window can be made as one, two or multi sash windows and often in combination with fixed frame window in the same unit. The window is available with a variety of glazing bars. The window is available in all types of glass or combination of glass such as self-cleaning, low energy, solar & thermal regulating, safety, noise reduced or decorative glass. U-values ​​down to 0.8.

Roto Designo R8 top-hung roof window (PVC) with safety and thermal insulation glazing in white PVC with thermal insulating block. Top-hung roof window with an opening angle of 45° and stepless pivoting range. The Roto top-hung roof window can be used for a roof-pitch from 20° to 65°. The cleaning position is guided and self-locking. Single-handed operation for all functions at the bottom of the window. Four point central locking system for secure locking, even gasket-compression and increased burglar-resistant security. Gaskets: Double gasket system all-round on the sash. Frame cover profile with additional gasket function outside. External covers: Made of aluminium (anthracite-metallic), plug-in installation system without exposed screw-fixings preassembled ex works.

Roto Designo R4 centre-pivot roof window (PVC) with safety and thermal insulation glazing in white PVC. The Roto centre-pivot roof-window can be used for a roof pitch from 15° to 85°. Centre-pivot roof window with a central swing axis. Single-handed operation for all functions at the bottom of the window. Gaskets: Single or double gasket system all-round on the sash. Frame cover profile with additional gasket function outside. External covers made of aluminium (anthracite-metallic): plug-in installation system without exposed screw-fixings, preassembled ex works.

Roto Designo R4 centre-pivot roof window (timber) with safety and thermal insulation glazing in natural timber. The Roto centre-pivot roof window can be used for a roof pitch from 15° to 85°. Centre-pivot roof window with a central swing axis. Single-handed operation for all functions at the bottom of the window. Gaskets: Single or double gasket system all-round on the sash. Frame cover profile with additional gasket function outside. External covers made of aluminium (anthracite-metallic): plug-in installation system without exposed screw-fixings, preassembled ex works.

Roto Designo R6 centre-pivot roof window (PVC) with safety and thermal insulation glazing in white PVC with thermal insulating block. Centre-pivot roof window with a central swing axis. Single-handed operation for all functions at the bottom of the window. Ideally suitable as a combination element for Roto top-hung roof windows. The Roto centre-pivot roof window can be used for a roof pitch from 15° to 90°. Gaskets: Double gasket system all-round on the sash. Frame cover profile with additional gasket function outside. External covers: Made of aluminium (anthracite-metallic), plug-in installation system without exposed screw-fixings, preassembled ex works.

Roto Designo R6 centre-pivot roof window (timber) with safety and thermal insulation glazing in natural timber with thermal insulating block. Centre-pivot roof window with a central swing axis. Single-handed operation for all functions at the bottom of the window. Ideally suitable as a combination element for Roto top-hung roof windows. The Roto centre-pivot roof window can be used for a roof pitch from 15° to 90°. Gaskets: Double gasket system all-round on the sash. Frame cover profile with additional gasket function outside. External covers: Made of aluminium (anthracite-metallic), plug-in installation system without open screw-fixings, preassembled ex works.

Roto Designo R5 roof window for smoke and heat venting release systems (PVC) with safety and thermal insulation glazing in white PVC with thermal insulating block. External covers made of aluminium (anthracite-metallic). Bottom opening roof window. In the event of a fire the window opens per chain drive. The result is an optimal smoke extraction. Frame with factory-fitted plastic sheeting connection on the inside, flexible two-pieced thermal insulating block right up to the frame's upper edge and frame-cover gasket made of weather resistant EPDM rubber for the simultaneous connection of the flashing. Plug-in installation without exposed screw-fixings, preassembled ex works.

Roto Designo R5 roof window for smoke and heat venting release systems (timber) with safety and thermal insulation glazing in natural timber with thermal insulating block. External covers made of aluminium (anthracite-metallic). Bottom opening roof window. In the event of a fire the window opens per chain drive. The result is an optimal smoke extraction. Frame with factory-fitted plastic sheeting connection on the inside, flexible two-pieced thermal insulating block right up to the frame's upper edge and frame-cover gasket made of weather resistant EPDM rubber for the simultaneous connection of the flashing. Plug-in installation without exposed screw-fixings, preassembled ex works.

Roto Designo R8 top-hung roof window (timber) with safety and thermal insulation glazing in natural timber with thermal insulating block. Top-hung roof window with an opening angle of 45° and stepless pivoting range. The Roto top-hung roof window can be used for a roof-pitch from 20° to 65°. The cleaning position is guided and self-locking. Single-handed operation for all functions at the bottom of the window. Four point central locking system for secure locking, even gasket compression and increased burglar-resistant security. Gaskets: Double gasket system all-round on the sash. Frame cover profile with additional gasket function outside. External covers: Made of aluminium (anthracite-metallic), plug-in installation system without exposed screw-fixings, preassembled ex works.

Roto Designo R7 top-third pivot roof window (PVC) with safety and thermal insulation glazing in white PVC with thermal insulation block. The Roto top-third pivot roof window can be used for a roof-pitch from 20° to 65°. Top-third pivot roof window with an opening angle of 38° and specified opening position. Lots of headroom thanks to the swing axis being located in the top-third of the window. Single-handed operation for all functions at the bottom of the window. Gaskets: Double gasket system all-round on the sash. Frame cover profile with additional gasket function outside. External covers made of aluminium (anthracite-metallic): plug-in installation system without exposed screw-fixings, preassembled ex works.

Roto Designo R7 top-third pivot roof window (timber) with safety and thermal insulation glazing in natural timber with thermal insulating block. The Roto top-third pivot roof window can be used for a roof-pitch from 20° to 65°. Top-third pivot roof window with an opening angle of 38° and specified opening position. Lots of headroom thanks to the swing axis being located in the top-third of the window. Single-handed operation for all functions at the bottom of the window. Gaskets: Double gasket system all-round on the sash. Frame cover profile with additional gasket function outside. External covers made of aluminium (anthracite-metallic): plug-in installation system without exposed screw-fixings, preassembled ex works.

Adjustable feet. Tub is stable even on uneven floors. Premium quality titanium alloy steel. Complete with Bath panel, installed bottom valve and drainage tube.

Adjustable feet. Tub is stable even on uneven floors. Premium quality titanium alloy steel. Complete with Bath panel, installed bottom valve and drainage tube.

Adjustable feet. Tub is stable even on uneven floors. Premium quality titanium alloy steel. Complete with Bath panel, installed bottom valve and drainage tube.

Adjustable feet. Tub is stable even on uneven floors. Premium quality titanium alloy steel. Complete with Bath panel, installed bottom valve and drainage tube.

Adjustable feet. Tub is stable even on uneven floors. Premium quality titanium alloy steel. Complete with Bath panel, installed bottom valve and drainage tube.

Adjustable feet. Tub is stable even on uneven floors. Premium quality titanium alloy steel. Complete with Bath panel, installed bottom valve and drainage tube.

Look beyond appearances and further beneath its hypnotic surface and Flow offers an exciting new innovation. The bottom layer of the collections backing is made of recycled material from our own onsite recycling plant – a process that results in the end product compromising up to 33% recycled material. In addition, like every other Bolon collection, Flow is phthalate free.

Look beyond appearances and further beneath its hypnotic surface and Flow offers an exciting new innovation. The bottom layer of the collections backing is made of recycled material from our own onsite recycling plant – a process that results in the end product compromising up to 33% recycled material. In addition, like every other Bolon collection, Flow is phthalate free.

Look beyond appearances and further beneath its hypnotic surface and Flow offers an exciting new innovation. The bottom layer of the collections backing is made of recycled material from our own onsite recycling plant – a process that results in the end product compromising up to 33% recycled material. In addition, like every other Bolon collection, Flow is phthalate free.

Look beyond appearances and further beneath its hypnotic surface and Flow offers an exciting new innovation. The bottom layer of the collections backing is made of recycled material from our own onsite recycling plant – a process that results in the end product compromising up to 33% recycled material. In addition, like every other Bolon collection, Flow is phthalate free.

ASH TRAY BKP301 to be emptied from the bottom, installed to a wall or a bin. We have applied the quality and style associated with our BikeKeeper racks to our outdoor furniture line as well. If necessary, we can upgrade your outdoor furniture during the bicycle parking station construction, or provide you with a smart bicycle storage solution for a refurnished yard. While our furniture was designed to complement the BikeKeeper bicycle parking stations, their sophisticated design and colour options make them a fitting choice for any yard.

Hardware system for pivot sliding cabinet doors weighing up to 40 and 50 kg The HAWA-Concepta 40/50 slides doors alongside cabinet bodies or into wall recesses. Room-high designs and walk-in cabinets are easy and efficient to implement. The well-thought-out concept has omitted a bottom guide channel and offers optimum flexible room utilisation with no obstructions in the form of protruding doors. HAWA-Concepta 40/50 is a true master of design thanks to a broad band width of available dimensions, weights and material thicknesses.

K.LINE strip and multi-paned windows with complete thermal breaks Different types of openings (casement, tilt & turn, bottom hung) Several choices of mullions and rails Possibility to have reinforcements depending on intertia needs

Hinged support rail Duo System 800 K - with two gripping levels arranged above each other - upper rail is merged with the top rail at an angle of 135° - upper rail (diameter 33 mm) for holding on to and providing support - bottom rail (diameter 25 mm) starts at a distance of 250 mm from the front edge of the upper rail and is used for holding on to and for turning in from the side - 850 mm projection, wall mounting plate 181 mm high and 130 mm wide - can be folded upwards and, folded downwards with braking mechanism - made of high-quality polyamide in HEWI colours 98 (signal white) or 99 (pure white) - with continuous, corrosion resistant steel core and integrated wall mounting plate made of steel with high-quality polyamide cover - stable three-point fixing - for wall mounting with concealed, non-corrosive and tested fixing materials for different wall systems - with toilet roll holder 950.50.01090, toilet roll holder with WC flushing mechanism and function button (radio-controlled) 950.50.06290, 950.50.06390 and floor supports 950.50.020XA, 950.50.025XA and 950.50.026XA for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the DIN 18040, ÖNORM B1600/1601 and SIA 500 requirements

Hinged support rail Duo - with two gripping levels arranged above each other - upper rail is merged with the top rail at an angle of 135° - upper rail made of rectangular profile, 40 mm wide and 30 mm, provides a wide support surface and large radii for pleasant gripping, used to hold on tight and for support - bottom rail (diameter 25 mm) starts at a distance of 250 mm from the front edge of the upper rail and is used for holding on to and for turning in from the side - 850 mm projection, wall mounting plate 181 mm high and 130 mm wide - can be folded upwards and, folded downwards with braking mechanism - made of metal, high-quality chrome-plated - wall-mounting plate cover made of high-quality chrome-plated synthetic material - stable three-point fixing - for wall mounting with concealed, non-corrosive and tested fixing materials for different wall systems - with toilet roll holder 950.50.01150, toilet roll holder with WC flushing mechanism and function button (radio-controlled) 950.50.06490 (right), 950.50.06590 (left), floor supports 950.50.020XA, 950.50.025XA, 950.50.026XA and arm pad 950.50.03192 for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the DIN 18040, ÖNORM B1600/1601 and SIA 500 requirements

A higher standard of security, with a slim design! Buildings, commercial outlets and premises with a high risk of break-in (e.g. banks, jeweller’s shops, etc.) require an entrance that is both secure and pleasing to the eye. With their slim aluminium profiles, Gilgen SLX-M RC2 and SLX-M RC3 (equivalent to PAS24) automatic doors offer a design that is invitingly transparent. The automatic locking, reinforced safety glass and flush bottom guide rails are designed to ensure efficient break-in prevention.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Smooth surface with multicoloured granules. [LIST] Rubber flooring in 2 mm thickness with small chips inserted in the compound to give a dotted pattern, smooth surface and a bottom layer suitable for adhesive bonding. Tiles 610 x 610 mm or rolls of 1,90 x 14 m Surface protected by a solid polymeric coating UV cured, which improves performance and reduces maintenance costs. Safe for the environment and health, certified by the environmental label BLUE ANGEL RAL UZ 120 which guarantees the absence of carcinogenic nitrosamines according to TRGS 552, Free of pvc , halogens, phthalates and formaldehyde. In compliance with requirements for the emissions of VOCS (volatile organic compounds) required by the following standards: Blue Angel RAL UZ 120, AgBB, California Specification Section 01350, A+ French Label. [/LIST]

Dissipative flooring. Embossed surface [LIST] Rubber flooring in 2 mm thickness with small chips inserted in the compound to give a dotted pattern, with slightly embossed surface and a bottom layer suitable for adhesive bonding Tiles of 610 x 610 mm or in rolls of 1,90 x 10 m In compliance with requirements for the emissions of VOCS (volatile organic compounds) required by the Following standards: AgBB, A+ French Label Rated as static dissipative, perform a vertical electrical resistance measured Installation to be carried out with conductive adhesive and copper foils to form a suitable conductive grid to be connected to the Earth points. [/LIST]

The SRW6U SmartRack 6U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The side panels and front door lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible front door can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW6U comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 16.5 inches deep, such as network switches and patch panels.

The SRW9U SmartRack 9U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The side panels and front door lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible front door can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW9U comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 16.5 inches deep, such as network switches and patch panels.

The SRW10US SmartRack 10U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW10US comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.

The SRW12US SmartRack 12U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW12US comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.

The SRW18US SmartRack 18U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 250 pounds. The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW18US comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.

The SRW12USG SmartRack 12U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The front door features a shatter-resistant clear acrylic window that lets you monitor equipment readouts without unlocking the enclosure. Not only does the window help prevent equipment tampering and reduce acoustic noise, but it also adds visual flair to your IT installation. The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment and cabling during installation and maintenance. The doors and side panels lock securely to help prevent damage, tampering or theft. The top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible doors can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing. The SRW12USG comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and 12-24 threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.

Tripp Lite’s SmartRack 18U Mid-Depth Rack Enclosure Cabinet is packed with features designed to simplify rack equipment installations and rack equipment maintenance: top and bottom cable routing ports, perforated door and side panels to promote efficient airflow, adjustable vertical mounting rails and more. And as part of the SmartRack family, the SR18UB is compatible with Tripp Lite’s extensive range of rackmount accessories, enabling you to customize your solution to meet any requirement. The SR18UB ships fully assembled for quick installation and comes with a 5-year warranty. The SR18UB is compatible with all standard 19-inch rack equipment and features front and rear pairs of vertical rails with square mounting holes. The rails are adjustable in quarter-inch increments to accommodate equipment depths from 3 to 32.5 inches, ideal for standard server installation. Adjustment is quick and convenient: simply unscrew the rails, slide them to the desired depth and restore the screws. The rails feature square mounting holes and are capable of supporting up to 1,000 lbs of equipment with included installation hardware. Each rack space within the enclosure is numbered for easy reference. With a locking, reversible front/rear doors and locking, removable side panels, the SR18UB provides safe, secure installation. This prevents unauthorized access to installed equipment while making it easy for authorized personnel to perform inspections, maintenance and equipment replacement.

Tripp Lite’s SmartRack 24U Mid-Depth Rack Enclosure Cabinet is packed with features designed to simplify rack equipment installations and rack equipment maintenance: top and bottom cable routing ports, perforated front and rear doors and solid side panels promote efficient airflow, adjustable vertical mounting rails and more. And as part of the SmartRack family, the SR24UB is compatible with Tripp Lite’s extensive range of rackmount accessories, enabling you to customize your solution to meet any requirement. The SR24UB ships fully assembled for quick installation and comes with a 5-year warranty. The SR24UB is compatible with all standard 19-inch rack equipment and features front and rear pairs of vertical rails with square mounting holes. The rails are adjustable in quarter-inch increments to accommodate equipment depths from 3 to 32.5 inches, ideal for standard server installation. Adjustment is quick and convenient: simply unscrew the rails, slide them to the desired depth and restore the screws. The rails feature square mounting holes and are capable of supporting up to 1,000 lbs of equipment with included installation hardware. Each rack space within the enclosure is numbered for easy reference. With a locking, reversible front/rear doors and locking, removable side panels, the SR24UB provides safe, secure installation for all equipment.

Tripp Lite’s SR25UB premium SmartRack Enclosure Cabinet is packed with features designed to simplify rack equipment installations and rack equipment maintenance: top and bottom cable routing ports, perforated door and side panels to promote efficient airflow, adjustable vertical mounting rails and more. And as part of the SmartRack family, the SR25UB is compatible with Tripp Lite’s extensive range of rackmount accessories, enabling you to customize your solution to meet any requirement. The SR25UB ships fully assembled for quick installation and comes with a 5-year warranty. The SR25UB has 25U of capacity and is compatible with all standard 19-inch rack equipment. The front and rear pairs of vertical rails feature square mounting holes and are numbered by rack space for easy reference. The rails are adjustable in quarter-inch increments to accommodate equipment depths from 4 to 37 inches. Adjustment is quick and convenient: simply unscrew the rails, slide them to the desired depth and restore the screws. The rails feature square mounting holes and are capable of supporting up to 3000 lb of equipment with included installation hardware (2250-lb rolling capacity). With a locking, reversible front door and locking, removable side panels, SR25UB provides safe, secure installation for all equipment. This prevents unauthorized access to installed equipment while making it easy for authorized personnel to perform inspections, maintenance and equipment replacement.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Contour 21 37 cm handrinse washbasin left hand taphole no overflow or chainstay hole, bottom outlet

Contour 21 37 cm handrinse washbasin right hand taphole no overflow or chainstay hole, bottom outlet

Sandringham 21 close coupled cistern 6 or 4 litre single flush syphon bottom supply and internal overflow, with cover fastener

<p>BuildBlock ICFs are a comprehensive product family of Insulated Concrete Forms. Available in sizes 4"-12"+ they deliver superior energy-efficiency, acoustic, and disaster-reslilience performance. BuildBlock ICFs are available in all the form types necessary for construction including: 90°, 45°, 2'-4'-8'-12'-16'-20' radius, TaperTop, and BrickLedge configurations.</p> <p>BuildBlock ICFs deliver fast construction, multiple reinforcement options including traditional rebar up to #8 in large forms.</p> <p>BuildBlock ICF forms combine the standard features you’ve come to expect in a quality ICF. BuildBlock is built for speed with the least waste and many unique benefits you’ll find in no other block.</p> <ul> <li>Ready to Stack. No on-site assembly required; start installing right off the truck.</li> <li>Fully Reversible. All forms are fully reversible; no top, bottom, left or right. Longer corner design provides automatic offset for each course.</li> <li>Industry Standard Size. Industry-standard 16-inch (406.4mm) high forms produce less waste when cutting around doors and windows.</li> <li>Tight Interlocking Blocks. Blocks easily stack and securely lock into place resulting in greater strength over the competition. No foam or clips required between courses.</li> <li>2.5-inch (63.5mm) Foam Panels. Allows easy accommodation of electrical and plumbing installation in the foam.</li> <li>High-density Plastic Webs on 6-inch centers. Greater strength, more value.</li> <li>Rebar Support eliminates most steel tying.</li> <li>Easy mechanical chases for plumbing and electrical.</li> <li>Open Web Design for efficient concrete flow and half-height block support.</li> <li>Extra Heavy-duty Attachment Points (450+lbs.) Located every 8-inches vertically, and 6-inches horizontally.</li> <li>Molded-in Tape Measure and Horizontal Cut Lines.</li> <li>1-inch Repeating Cut Pattern on Block Connection.</li> <li>Lowest waste of any ICF on the market today.</li> <li>Attachment Point Markings</li> <li>No special half-height blocks required.</li> </ul>

Group thermostatic mixing valve for mixed water distribution from 32 - 42°C: Anti-scalding safety. Regulation of temperature variations. Filters and non-return valves can be accessed from the outside without removing the mechanism. Thermal shock with no specific lever needed (push-button on the control knob). Interchangeable cartridge with automotive cell. High-resistance chrome-plated brass body DZR. Maximum hot water temperature: 85°C. Differential hot water / mixed water: 15°C mini. Pressure differences at the inlets: 1 bar max (0.5 bar recommended). Minimum pressure / maximum: 1 - 10 bar (1 - 5 bar recommended). Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring). Mixed water outlet at the top (purple ring). For bottom outlet: unscrew / place lid at the top and outlet connector at the bottom. Maximum temperature limiter, can be adjusted by the installer. Reduced risk of scalding by limiting temperature at the point-of-use. 55 lpm - M¾" 10-year warranty.

Group thermostatic mixing valve for mixed water distribution from 32 - 42°C: Anti-scalding safety. Regulation of temperature variations. Filters and non-return valves can be accessed from the outside without removing the mechanism. Thermal shock with no specific lever needed (push-button on the control knob). Interchangeable cartridge with automotive cell. High-resistance chrome-plated brass body DZR. Maximum hot water temperature: 85°C. Differential hot water / mixed water: 15°C minimum. Pressure differences at the inlets: 1 bar maximum (0.5 bar recommended). Minimum pressure / maximum: 1 - 10 bar (1 - 5 bar recommended). Left hand side hot water inlet (red ring) and right hand side cold water inlet (blue ring). Mixed water outlet at the top (purple ring). For bottom outlet: unscrew / place lid at the top and outlet connector at the bottom. Maximum temperature limiter, can be adjusted by the installer. Reduced risk of scalding by reducing the temperature at the point-of-use. 90 lpm at 3 bar - M1". 10-year warranty.

Wall-mounted SECURITHERM individual sequential thermostatic shower mixer: Single lever control mixer with no non-return valves. Anti-scalding failsafe: shuts off immediately if cold water supply fails. Securitouch thermal insulation prevents burns. Scale-resistant thermostatic sequential cartridge for single lever control of temperature and flow rate adjustment. Temperature control from cold water up to 39°C with maximum temperature limiter set at 39°C. Thermal shocks are possible. Body with smooth interior and low water volume. Flow rate regulated at 9 lpm. Chrome-plated brass body and Hygiene control lever L. 100mm. M1/2" bottom outlet. Offset M1/2" M3/4" STOP/PURGE connectors. 10-year warranty.

The PURMO Ventil Compact M panel radiators with mid-bottom connectors, profiled heating panels and convection fins are equipped with side covers and a top grille. Two mid-bottom and four side G ½" threaded female connectors allow for central bottom or side connection. The radiator is also equipped with a built-in thermostatic Oventrop valve insert providing pre-setting. The main advantage of the central bottom connection relies of the fact that regardless of the length, height and depth of the radiator, the layout of heating system connections can be defi ned at the building shell stage and it will not change as a result of the selection of a specifi c size and type of the radiator.

The versatile PURMO Ventil Compact panel radiators with profiled heating panels and convection fins are equipped with side covers and a top grille. Two bottom and four side G ½" threaded female connectors allow for bottom or side connection. The radiator is also equipped with a built-in thermostatic Oventrop valve insert providing pre-setting.

The versatile PURMO Plan Ventil Compact panel radiators stand out due to their completely flat front panel. The panel is glued to the profiled, front base heating panel in a manner concealing any protruding edges, when looking at the radiator from the front. The radiators are equipped with convection fins as well as side covers and a top grille. Two bottom and four side G ½" threaded female connectors allow for bottom or side connection. The radiator is also equipped with a built-in thermostatic Oventrop valve insert providing presetting.

The versatile PURMO Ramo Ventil Compact panel radiators stand out due to their flat front panel with slight horizontal ribbing. The panel is glued to the profiled, front base heating panel in a manner concealing any protruding edges, when looking at the radiator from the front. The radiators are equipped with convection fins as well as side covers and a top grille. Two bottom and four side G ½" threaded female connectors allow for bottom or side connection. The radiator is also equipped with a built-in thermostatic Oventrop valve insert providing pre-setting.

The PURMO Plan Ventil Compact M panel radiators with mid-bottom connectors stand out due to their completely flat front panel. The panel is glued to the profiled, front base heating panel in a manner concealing any protruding edges, when looking at the radiator from the front. The radiators are equipped with convection fins as well as side covers and a top grille. Two mid-bottom and four side G ½" threaded female connectors allow for central bottom or side connection. The radiator is also equipped with a built-in thermostatic Oventrop valve insert providing pre-setting. The main advantage of the central bottom connection relies of the fact that regardless of the length, height and depth of the radiator, the layout of heating system connections can be defined at the building shell stage and it will not change as a result of the selection of a specific size and type of the radiator.

The PURMO Ramo Ventil Compact M panel radiators with mid-bottom connectors stand out due to their flat front panel with slight horizontal ribbing. The panel is glued to the profiled, front base heating panel in a manner concealing any protruding edges, when looking at the radiator from the front. The radiators are equipped with convection fins as well as side covers and a top grille. Two mid-bottom and four side G ½" threaded female connectors allow for central bottom or side connection. The radiator is also equipped with a built-in thermostatic Oventrop valve insert providing pre-setting. The main advantage of the central bottom connection relies of the fact that regardless of the length, height and depth of the radiator, the layout of heating system connections can be defined at the building shell stage and it will not change as a result of the selection of a specific size and type of the radiator.

FAKRO FTP-V P2 Secure dedicated for roof pitches from 15 to 90 degrees. Window equipped with reinforcement structure provided by the topSafe system, a new system preventing removal of antiburglary, laminated glass Class P2A and handle with a lock. Such a window no longer requires any additional safeguards, such as additional locks that hinder the use of windows. Cleaning the outer pane and setting the awning blind with the use of blocking sash bolt when sash rotated through 180 degrees. Handle with two-stage micro-opening is situated at the bottom of the sash. A wide range of accessories. Warranty: 10 years warranty period for window, lifetime – glazing until hail resistance warranty.

FAKRO FTP-V U3, manufactured in pine, vacuum impregnated and coated with acrylic lacquer roof window. Dedicated for roof pitches from 15 to 90 degrees. Easy cleaning of the outer pane and operating the awning blind with the use of blocking sash bolt when rotated through 180 degrees. The handle is located at the bottom of the sash and it's equipped with a two step micro-opening facilty. A wide range of accessories. Ability to install electrical controls. Warranty: 10 years warranty period for window, lifetime – glazing until hail resistance warranty.

FAKRO FTP-V U5, manufactured in pine, vacuum impregnated and coated with acrylic lacquer roof window. Dedicated for roof pitches from 15 to 90 degrees. Easy cleaning of the outer pane and operating the awning blind with the use of blocking sash bolt when rotated through 180 degrees. The handle is located at the bottom of the sash and it's equipped with a two step micro-opening facilty. A wide range of accessories. Ability to install electrical controls. Warranty: 10 years warranty period for window, lifetime – glazing until hail resistance warranty.

The PURMO Vertical panel radiators are a vertical variant intended for installation on narrow and tall fragments of walls. The radiators are equipped with convection fins (except for the 10 and 20C types) and side covers (except for the 10 type). They have no top grille. Four bottom and two top G ½" threaded female connectors allow for bottom (including central) or side connection. The radiator is not equipped with a built-in thermostatic valve insert.

Convectors Narbonne VT are composed of several interconnected profiled steel heating elements of a rectangular cross section. Each convector has got two bottom connecting openings, each with external thread G ½”, enabling bottom connection. Three side openings with internal thread G ½” are normally designed for mounting the Danfoss thermostatic valve insert with pre-regulation, plus the air vent and closing plug. Narbonne VT convectors are equipped with two side covers and the top masking grille. The heating profiles are mounted horizontally, so that to retain the 2 mm-wide distancing between each two, necessary to compensate for the heat expansion of the elements, and enabling the perfect varnish cover of the entire convector’s surface. Most models are equipped with convective elements, increasing the heating efficiency of the convectors.

Convectors Narbonne V VT are composed of several interconnected profiled steel heating elements of a rectangular cross section. Each convector has got two bottom connecting openings, each with external thread G ½”, enabling bottom connection. Four side openings with internal thread G ½” are normally designed for mounting the Danfoss thermostatic valve insert with pre-regulation, plus the air vent and closing plugs. Narbonne V VT convectors are equipped with two side covers, but no top masking grille. The heating profiles are mounted vertically, so that to retain the 2 mm-wide distancing between each two, necessary to compensate for the heat expansion of the elements, and enabling the perfect varnish cover of the entire convector’s surface. Most models are equipped with convective elements, increasing the heating efficiency of the convectors.

Purmo’s Delta Laserline Ventil column radiators are manufactured in the same types and sizes, and support the same features as the Delta Laserline radiators. The basic difference is that – in contrast to the Delta Laserline radiators – Delta Laserline Ventils are factory equipped with the valve insert with initial preset. The radiators are to be connected to the hydronic domestic heating system from the bottom, with two connecting stubs with internal diameter G .” and 50 mm spacing (not applicable to the radiators connected via the edge segments). As standard, opposite the valve insert the welded-on cover is positioned, with internal thread G .”, for the comfortable G .” air vent mounting, and below – the same cover also with G .” internal thread, for closing plug mounting.

Purmo’s Delta Twin M decorative radiators integrate the state of the art technology of execution with remarkable design, providing their Users with highest qualities of climate comfort and functionality. The bottom middle connection solution present in all height options of the Twin M radiators, in association with the elegant yet practical tower drying rail offered as standard and the high heat output, make these radiators highly suitable for application in large designer bathrooms or even bathing rooms. Regularly manufactured as a 2-columned version only (in 5 height varieties and 2 length options), in RAL 9016 snow-white coloring, at Clients’ request Delta Twin M can be delivered in any other available RAL colour.

It isn’t often you can find a pedestal table made entirely of wood, especially when it is for a public space where stability and durability are essential qualities. Locus (2017) pedestal table has been created from an experiment with similar products in metal where the designer has transferred the formative properties to a pedestal table made entirely of wood. The table is perfect to combine in environments that require coffee, dining and bar tables in the same style. Locus comes in heights of 550, 620, 730, 900 and 1100 mm, and in several different sizes of rectangular, square, round or oval tabletops. Tabletops are made of blockboard veneered in oak, birch, ash, white laminate and standard stains on ash or in MDF with standard colors. Please enquire for details of non-standard sizes and finishes. The pedestal and feet with characteristic heels at the bottom are in solid wood with adjustable screws.

It isn’t often you can find a pedestal table made entirely of wood, especially when it is for a public space where stability and durability are essential qualities. Locus (2017) pedestal table has been created from an experiment with similar products in metal where the designer has transferred the formative properties to a pedestal table made entirely of wood. The table is perfect to combine in environments that require coffee, dining and bar tables in the same style. Locus comes in heights of 550, 620, 730, 900 and 1100 mm, and in several different sizes of rectangular, square, round or oval tabletops. Tabletops are made of blockboard veneered in oak, birch, ash, white laminate and standard stains on ash or in MDF with standard colors. Please enquire for details of non-standard sizes and finishes. The pedestal and feet with characteristic heels at the bottom are in solid wood with adjustable screws.

It isn’t often you can find a pedestal table made entirely of wood, especially when it is for a public space where stability and durability are essential qualities. Locus (2017) pedestal table has been created from an experiment with similar products in metal where the designer has transferred the formative properties to a pedestal table made entirely of wood. The table is perfect to combine in environments that require coffee, dining and bar tables in the same style. Locus comes in heights of 550, 620, 730, 900 and 1100 mm, and in several different sizes of rectangular, square, round or oval tabletops. Tabletops are made of blockboard veneered in oak, birch, ash, white laminate and standard stains on ash or in MDF with standard colors. Please enquire for details of non-standard sizes and finishes. The pedestal and feet with characteristic heels at the bottom are in solid wood with adjustable screws.

It isn’t often you can find a pedestal table made entirely of wood, especially when it is for a public space where stability and durability are essential qualities. Locus (2017) pedestal table has been created from an experiment with similar products in metal where the designer has transferred the formative properties to a pedestal table made entirely of wood. The table is perfect to combine in environments that require coffee, dining and bar tables in the same style. Locus comes in heights of 550, 620, 730, 900 and 1100 mm, and in several different sizes of rectangular, square, round or oval tabletops. Tabletops are made of blockboard veneered in oak, birch, ash, white laminate and standard stains on ash or in MDF with standard colors. Please enquire for details of non-standard sizes and finishes. The pedestal and feet with characteristic heels at the bottom are in solid wood with adjustable screws.

It isn’t often you can find a pedestal table made entirely of wood, especially when it is for a public space where stability and durability are essential qualities. Locus (2017) pedestal table has been created from an experiment with similar products in metal where the designer has transferred the formative properties to a pedestal table made entirely of wood. The table is perfect to combine in environments that require coffee, dining and bar tables in the same style. Locus comes in heights of 550, 620, 730, 900 and 1100 mm, and in several different sizes of rectangular, square, round or oval tabletops. Tabletops are made of blockboard veneered in oak, birch, ash, white laminate and standard stains on ash or in MDF with standard colors. Please enquire for details of non-standard sizes and finishes. The pedestal and feet with characteristic heels at the bottom are in solid wood with adjustable screws.

It isn’t often you can find a pedestal table made entirely of wood, especially when it is for a public space where stability and durability are essential qualities. Locus (2017) pedestal table has been created from an experiment with similar products in metal where the designer has transferred the formative properties to a pedestal table made entirely of wood. The table is perfect to combine in environments that require coffee, dining and bar tables in the same style. Locus comes in heights of 550, 620, 730, 900 and 1100 mm, and in several different sizes of rectangular, square, round or oval tabletops. Tabletops are made of blockboard veneered in oak, birch, ash, white laminate and standard stains on ash or in MDF with standard colors. Please enquire for details of non-standard sizes and finishes. The pedestal and feet with characteristic heels at the bottom are in solid wood with adjustable screws.

It isn’t often you can find a pedestal table made entirely of wood, especially when it is for a public space where stability and durability are essential qualities. Locus (2017) pedestal table has been created from an experiment with similar products in metal where the designer has transferred the formative properties to a pedestal table made entirely of wood. The table is perfect to combine in environments that require coffee, dining and bar tables in the same style. Locus comes in heights of 550, 620, 730, 900 and 1100 mm, and in several different sizes of rectangular, square, round or oval tabletops. Tabletops are made of blockboard veneered in oak, birch, ash, white laminate and standard stains on ash or in MDF with standard colors. Please enquire for details of non-standard sizes and finishes. The pedestal and feet with characteristic heels at the bottom are in solid wood with adjustable screws.

It isn’t often you can find a pedestal table made entirely of wood, especially when it is for a public space where stability and durability are essential qualities. Locus (2017) pedestal table has been created from an experiment with similar products in metal where the designer has transferred the formative properties to a pedestal table made entirely of wood. The table is perfect to combine in environments that require coffee, dining and bar tables in the same style. Locus comes in heights of 550, 620, 730, 900 and 1100 mm, and in several different sizes of rectangular, square, round or oval tabletops. Tabletops are made of blockboard veneered in oak, birch, ash, white laminate and standard stains on ash or in MDF with standard colors. Please enquire for details of non-standard sizes and finishes. The pedestal and feet with characteristic heels at the bottom are in solid wood with adjustable screws.

It isn’t often you can find a pedestal table made entirely of wood, especially when it is for a public space where stability and durability are essential qualities. Locus (2017) pedestal table has been created from an experiment with similar products in metal where the designer has transferred the formative properties to a pedestal table made entirely of wood. The table is perfect to combine in environments that require coffee, dining and bar tables in the same style. Locus comes in heights of 550, 620, 730, 900 and 1100 mm, and in several different sizes of rectangular, square, round or oval tabletops. Tabletops are made of blockboard veneered in oak, birch, ash, white laminate and standard stains on ash or in MDF with standard colors. Please enquire for details of non-standard sizes and finishes. The pedestal and feet with characteristic heels at the bottom are in solid wood with adjustable screws.

It isn’t often you can find a pedestal table made entirely of wood, especially when it is for a public space where stability and durability are essential qualities. Locus (2017) pedestal table has been created from an experiment with similar products in metal where the designer has transferred the formative properties to a pedestal table made entirely of wood. The table is perfect to combine in environments that require coffee, dining and bar tables in the same style. Locus comes in heights of 550, 620, 730, 900 and 1100 mm, and in several different sizes of rectangular, square, round or oval tabletops. Tabletops are made of blockboard veneered in oak, birch, ash, white laminate and standard stains on ash or in MDF with standard colors. Please enquire for details of non-standard sizes and finishes. The pedestal and feet with characteristic heels at the bottom are in solid wood with adjustable screws.

It isn’t often you can find a pedestal table made entirely of wood, especially when it is for a public space where stability and durability are essential qualities. Locus (2017) pedestal table has been created from an experiment with similar products in metal where the designer has transferred the formative properties to a pedestal table made entirely of wood. The table is perfect to combine in environments that require coffee, dining and bar tables in the same style. Locus comes in heights of 550, 620, 730, 900 and 1100 mm, and in several different sizes of rectangular, square, round or oval tabletops. Tabletops are made of blockboard veneered in oak, birch, ash, white laminate and standard stains on ash or in MDF with standard colors. Please enquire for details of non-standard sizes and finishes. The pedestal and feet with characteristic heels at the bottom are in solid wood with adjustable screws.

It isn’t often you can find a pedestal table made entirely of wood, especially when it is for a public space where stability and durability are essential qualities. Locus (2017) pedestal table has been created from an experiment with similar products in metal where the designer has transferred the formative properties to a pedestal table made entirely of wood. The table is perfect to combine in environments that require coffee, dining and bar tables in the same style. Locus comes in heights of 550, 620, 730, 900 and 1100 mm, and in several different sizes of rectangular, square, round or oval tabletops. Tabletops are made of blockboard veneered in oak, birch, ash, white laminate and standard stains on ash or in MDF with standard colors. Please enquire for details of non-standard sizes and finishes. The pedestal and feet with characteristic heels at the bottom are in solid wood with adjustable screws.

It isn’t often you can find a pedestal table made entirely of wood, especially when it is for a public space where stability and durability are essential qualities. Locus (2017) pedestal table has been created from an experiment with similar products in metal where the designer has transferred the formative properties to a pedestal table made entirely of wood. The table is perfect to combine in environments that require coffee, dining and bar tables in the same style. Locus comes in heights of 550, 620, 730, 900 and 1100 mm, and in several different sizes of rectangular, square, round or oval tabletops. Tabletops are made of blockboard veneered in oak, birch, ash, white laminate and standard stains on ash or in MDF with standard colors. Please enquire for details of non-standard sizes and finishes. The pedestal and feet with characteristic heels at the bottom are in solid wood with adjustable screws.

It isn’t often you can find a pedestal table made entirely of wood, especially when it is for a public space where stability and durability are essential qualities. Locus (2017) pedestal table has been created from an experiment with similar products in metal where the designer has transferred the formative properties to a pedestal table made entirely of wood. The table is perfect to combine in environments that require coffee, dining and bar tables in the same style. Locus comes in heights of 550, 620, 730, 900 and 1100 mm, and in several different sizes of rectangular, square, round or oval tabletops. Tabletops are made of blockboard veneered in oak, birch, ash, white laminate and standard stains on ash or in MDF with standard colors. Please enquire for details of non-standard sizes and finishes. The pedestal and feet with characteristic heels at the bottom are in solid wood with adjustable screws.

It isn’t often you can find a pedestal table made entirely of wood, especially when it is for a public space where stability and durability are essential qualities. Locus (2017) pedestal table has been created from an experiment with similar products in metal where the designer has transferred the formative properties to a pedestal table made entirely of wood. The table is perfect to combine in environments that require coffee, dining and bar tables in the same style. Locus comes in heights of 550, 620, 730, 900 and 1100 mm, and in several different sizes of rectangular, square, round or oval tabletops. Tabletops are made of blockboard veneered in oak, birch, ash, white laminate and standard stains on ash or in MDF with standard colors. Please enquire for details of non-standard sizes and finishes. The pedestal and feet with characteristic heels at the bottom are in solid wood with adjustable screws.

It isn’t often you can find a pedestal table made entirely of wood, especially when it is for a public space where stability and durability are essential qualities. Locus (2017) pedestal table has been created from an experiment with similar products in metal where the designer has transferred the formative properties to a pedestal table made entirely of wood. The table is perfect to combine in environments that require coffee, dining and bar tables in the same style. Locus comes in heights of 550, 620, 730, 900 and 1100 mm, and in several different sizes of rectangular, square, round or oval tabletops. Tabletops are made of blockboard veneered in oak, birch, ash, white laminate and standard stains on ash or in MDF with standard colors. Please enquire for details of non-standard sizes and finishes. The pedestal and feet with characteristic heels at the bottom are in solid wood with adjustable screws.

It isn’t often you can find a pedestal table made entirely of wood, especially when it is for a public space where stability and durability are essential qualities. Locus (2017) pedestal table has been created from an experiment with similar products in metal where the designer has transferred the formative properties to a pedestal table made entirely of wood. The table is perfect to combine in environments that require coffee, dining and bar tables in the same style. Locus comes in heights of 550, 620, 730, 900 and 1100 mm, and in several different sizes of rectangular, square, round or oval tabletops. Tabletops are made of blockboard veneered in oak, birch, ash, white laminate and standard stains on ash or in MDF with standard colors. Please enquire for details of non-standard sizes and finishes. The pedestal and feet with characteristic heels at the bottom are in solid wood with adjustable screws.

It isn’t often you can find a pedestal table made entirely of wood, especially when it is for a public space where stability and durability are essential qualities. Locus (2017) pedestal table has been created from an experiment with similar products in metal where the designer has transferred the formative properties to a pedestal table made entirely of wood. The table is perfect to combine in environments that require coffee, dining and bar tables in the same style. Locus comes in heights of 550, 620, 730, 900 and 1100 mm, and in several different sizes of rectangular, square, round or oval tabletops. Tabletops are made of blockboard veneered in oak, birch, ash, white laminate and standard stains on ash or in MDF with standard colors. Please enquire for details of non-standard sizes and finishes. The pedestal and feet with characteristic heels at the bottom are in solid wood with adjustable screws.

It isn’t often you can find a pedestal table made entirely of wood, especially when it is for a public space where stability and durability are essential qualities. Locus (2017) pedestal table has been created from an experiment with similar products in metal where the designer has transferred the formative properties to a pedestal table made entirely of wood. The table is perfect to combine in environments that require coffee, dining and bar tables in the same style. Locus comes in heights of 550, 620, 730, 900 and 1100 mm, and in several different sizes of rectangular, square, round or oval tabletops. Tabletops are made of blockboard veneered in oak, birch, ash, white laminate and standard stains on ash or in MDF with standard colors. Please enquire for details of non-standard sizes and finishes. The pedestal and feet with characteristic heels at the bottom are in solid wood with adjustable screws.

It isn’t often you can find a pedestal table made entirely of wood, especially when it is for a public space where stability and durability are essential qualities. Locus (2017) pedestal table has been created from an experiment with similar products in metal where the designer has transferred the formative properties to a pedestal table made entirely of wood. The table is perfect to combine in environments that require coffee, dining and bar tables in the same style. Locus comes in heights of 550, 620, 730, 900 and 1100 mm, and in several different sizes of rectangular, square, round or oval tabletops. Tabletops are made of blockboard veneered in oak, birch, ash, white laminate and standard stains on ash or in MDF with standard colors. Please enquire for details of non-standard sizes and finishes. The pedestal and feet with characteristic heels at the bottom are in solid wood with adjustable screws.

It isn’t often you can find a pedestal table made entirely of wood, especially when it is for a public space where stability and durability are essential qualities. Locus (2017) pedestal table has been created from an experiment with similar products in metal where the designer has transferred the formative properties to a pedestal table made entirely of wood. The table is perfect to combine in environments that require coffee, dining and bar tables in the same style. Locus comes in heights of 550, 620, 730, 900 and 1100 mm, and in several different sizes of rectangular, square, round or oval tabletops. Tabletops are made of blockboard veneered in oak, birch, ash, white laminate and standard stains on ash or in MDF with standard colors. Please enquire for details of non-standard sizes and finishes. The pedestal and feet with characteristic heels at the bottom are in solid wood with adjustable screws.

It isn’t often you can find a pedestal table made entirely of wood, especially when it is for a public space where stability and durability are essential qualities. Locus (2017) pedestal table has been created from an experiment with similar products in metal where the designer has transferred the formative properties to a pedestal table made entirely of wood. The table is perfect to combine in environments that require coffee, dining and bar tables in the same style. Locus comes in heights of 550, 620, 730, 900 and 1100 mm, and in several different sizes of rectangular, square, round or oval tabletops. Tabletops are made of blockboard veneered in oak, birch, ash, white laminate and standard stains on ash or in MDF with standard colors. Please enquire for details of non-standard sizes and finishes. The pedestal and feet with characteristic heels at the bottom are in solid wood with adjustable screws.

It isn’t often you can find a pedestal table made entirely of wood, especially when it is for a public space where stability and durability are essential qualities. Locus (2017) pedestal table has been created from an experiment with similar products in metal where the designer has transferred the formative properties to a pedestal table made entirely of wood. The table is perfect to combine in environments that require coffee, dining and bar tables in the same style. Locus comes in heights of 550, 620, 730, 900 and 1100 mm, and in several different sizes of rectangular, square, round or oval tabletops. Tabletops are made of blockboard veneered in oak, birch, ash, white laminate and standard stains on ash or in MDF with standard colors. Please enquire for details of non-standard sizes and finishes. The pedestal and feet with characteristic heels at the bottom are in solid wood with adjustable screws.

The versatile Radson Integra panel radiators with profiled heating panels and convection fins are equipped with side covers and a top grille. Two bottom and four side G ½" threaded female connectors allow for bottom or side connection. The radiator is also equipped with a built-in Danfoss thermostatic valve insert providing pre-setting.

The Radson Integra Centro panel radiators with mid-bottom connectors, profiled heating panels and convection fins are equipped with side covers and a top grille. Two mid-bottom G 3/4" and four side G ½" threaded female connectors allow for central bottom or side connection. The radiator is also equipped with a built-in Danfoss thermostatic valve insert providing pre-setting. The main advantage of the central bottom connection relies of the fact that regardless of the length, height and depth of the radiator, the layout of heating system connections can be defined at the building shell stage and it will not change as a result of the selection of a specific size and type of the radiator.

The versatile Radson Integra Parada panel radiators stand out due to their completely flat front panel. The panel is glued to the profiled, front base heating panel in a manner concealing any protruding edges, when looking at the radiator from the front. The radiators are equipped with convection fins as well as side covers and a top grille. Two bottom and four side G ½" threaded female connectors allow for bottom or side connection. The radiator is also equipped with a built-in Danfoss thermostatic valve insert providing presetting.

The versatile Radson Integra Ramo panel radiators stand out due to their flat front panel with slight horizontal ribbing. The panel is glued to the profiled, front base heating panel in a manner concealing any protruding edges, when looking at the radiator from the front. The radiators are equipped with convection fins as well as side covers and a top grille. Two bottom and four side G ½" threaded female connectors allow for bottom or side connection. The radiator is also equipped with a built-in Danfoss thermostatic valve insert providing pre-setting.

Standard is an economical system characterized by a straight narrow profile providing the door with delicate framing which gives the front an impression of lightness. This popular system is often chosen by our clients. The wardrobes which use the Standard system work very well in narrow halls and in the attic. It is a good solution for minimalist interiors in classic, retro or Scandinavian styles. The wood-like version of the profile suits interiors in Provençal style. Unlike in the Lux system, the profile is characterized by a narrow frame and delicate form of the handle. Main advantage: • The unique in the market, proven and very durable system. • Profiles: powder coating or finished with wood-look PVC coating, corrosion resistant. • The biggest range of door height adjustments among all systems. • The special anti-jumping function which prevents the door from falling out of the track. • Smooth sliding of the door thanks to bottom rollers equipped for bearings. • The buffer strips with long and short hair protecting from dust and damping sounds. • The pneumatic closing mechanisms provide for gentle door closing. • Mechanical lock option is available. Available options: • sliding doors • pivoting doors Contact details: Phone: +48 48 332-17-05 e-mail: komandor@komandor.pl

The Lux system features wide edges and regular shapes. A smooth surface and slight indentation in the central part of the profile cause that it is very comfortable in use. The regular shape of the profile makes the wardrobe as well as the interior look softer. When we use a panel in the wood-like frame, the wardrobes in the Lux system give an impression of a solid piece of furniture and therefore they fit into rustic or classic style. Possibility of using different materials (glass, chipboard panels) fillings at one door, makes LUX system very widely used in the interior of different styles from classic, through retro, marine to rustic. Main advantage: • The unique in the market, proven and very durable system. • Profiles: powder coating or finished with wood-look PVC coating, corrosion resistant. • The biggest range of door height adjustments among all systems. • The special anti-jumping function which prevents the door from falling out of the track. • Smooth sliding of the door thanks to bottom rollers equipped for bearings. • The buffer strips with long and short hair protecting from dust and damping sounds. • The pneumatic closing mechanisms in the top track provide for gentle door closing. • Touch to open mechanism with soft-close solution option is available. • Mechanical lock and electronic lock options are available. Available options: • sliding doors • sliding door with divisions • pivoting doors • pivoting doors with divisions • slanted doors Contact details: Phone: +48 48 332-17-05 e-mail: komandor@komandor.pl

Magnetyt is the most advanced steel system combining the strength of steel with the beauty of aluminium where the frame is similar in shape to the aluminium profile of the Lazuryt line. A gentle classic but slightly rounded shape of the profile causes that it works very well with a wide range of filling materials. This profile matches well with classic interiors but also with rural ones like, for example, Provençal or rustic styles or even the more adventurous ones like vintage or eclectic. Main advantage: • Innovative, advanced and well-developed system with very quiet bottom rollers. • Stile offer a comfortable handle for easy opening and closing combined with impressive finish. • Profiles: powder coating or finished with wood-look PVC coating, corrosion resistant. • Rails masking strips in colours matching profiles, concealing the sliding mechanisms, create an attractive look. • The buffer strips with long and short hair protecting from dust and damping sounds. • The pneumatic closing mechanisms provide for gentle door closing. • Touch to open mechanism with soft-close solution option is available. • Mechanical lock and electronic lock options are available. Available options: • sliding doors • sliding door with divisions Contact details: Phone: +48 48 332-17-05 e-mail: komandor@komandor.pl

The Agat system refers to the culture of antique which for many ages has influenced the European beauty canons. Simplicity and harmony are the main characteristics of this profile which is a combination of an austere solid figure of classical simple and regular shapes with a modern expressive form. The profile provides wardrobes with lightness, softens their character without depriving them of harmony and perfect proportions. This is an offer for interiors in classic, retro, marine or boho styles, and even in romantic or French style with appropriate stylization. Main advantage: • Light, modern style with a hidden rolling system and invisible fastenings of bottom track. • Can be used in rooms of higher humidity and as an entrance door. • Possibility of using concealable bottom tracks making the use of the system easier. • The buffer strips with long and short hair protecting from dust and damping sounds. • The pneumatic closing mechanisms provide for gentle door closing. • Touch to open mechanism with soft-close solution option is available. • Mechanical lock and electronic lock options are available. • Curvilinear partition of the door is an option. Available options: • sliding doors • sliding door with divisions • pivoting doors • pivoting doors with divisions • slanted doors Contact details: Phone: +48 48 332-17-05 e-mail: komandor@komandor.pl

The Onyx system profile is a combination of two forms: a geometric one of simple and regular shapes and the one with a gentle rounded line. Simple finishes provide it with a special look which causes that the profile can match the most modern interiors making them more expressive and providing the built-in furniture with elegance and class. This comfortable in use profile is an option suitable for classic or minimalist interiors as well as those in modern, vintage or industrial styles. Main advantage: • Light, modern style with a hidden rolling system and invisible fastenings of bottom track. • Can be used in rooms of higher humidity and as an entrance door. • Possibility of using concealable bottom tracks making the use of the system easier. • The buffer strips with long and short hair protecting from dust and damping sounds. • The pneumatic closing mechanisms provide for gentle door closing. • Touch to open mechanism with soft-close solution option is available. • Mechanical lock and electronic lock options are available. • Curvilinear partition of the door is an option. Available options: • sliding doors • sliding door with divisions • pivoting doors • pivoting doors with divisions Contact details: Phone: +48 48 332-17-05 e-mail: komandor@komandor.pl

Lazuryt is a system applying the profile of a perfect subtle shape which looks very delicate. The slender line of the door, delicate roundness on the frame edges, purity of the form and perfect composition of the shape make Lazuryt an aristocrat among similar profiles. It is the profile which makes the wardrobes and interiors look elegant and classy and at the same time fresh and modern. For these reasons it matches such styles as: classic, retro, vintage, but also Scandinavian, eclectic and modern. Lazuryt looks good practically everywhere. Main advantage: • Light, modern style with a hidden rolling system and invisible fastenings of bottom track. • Can be used in rooms of higher humidity and as an entrance door. • Possibility of using concealable bottom tracks making the use of the system easier. • The buffer strips with long and short hair protecting from dust and damping sounds. • The pneumatic closing mechanisms provide for gentle door closing. • Touch to open mechanism with soft-close solution option is available. • Mechanical lock and electronic lock options are available. • Curvilinear partition of the door is an option. Available options: • sliding doors • sliding door with divisions • pivoting doors • pivoting doors with divisions • slanted doors • corner doors (inner, outer) Contact details: Phone: +48 48 332-17-05 e-mail: komandor@komandor.pl

Szafir is a system of a narrow, geometrically stylized, modern, elegant and tasteful profile matching any interior. The use of aluminum and choice of interesting colours emphasize the original shape and character of the profile making it more expressive. The wardrobes finished in the Szafir profile give an impression of modernity, originality and elegance. This is one of the most popular profiles in Komandor’s offer. It combines functionality of the frame which serves as a hand grip and a delicate look. Szafir looks good in modern, industrial, eclectic, Scandinavian as well as classic interiors. Main advantage: • A very popular system of assembled door, valued for durability and strength. • The invisible gasket provides an elegant look for the door with transparent glass. • Possibility of making the door of up to 1.5 m in width. • Silent and easy door movement with variable adjustment of door height. • Hidden sliding mechanisms and invisible fastenings of the bottom track. • The pneumatic closing mechanisms provide for gentle door closing. • Touch to open mechanism with soft-close solution option is available. • Mechanical lock and electronic lock options are available. • Curvilinear partition of the door is an option. Available options: • sliding doors • sliding door with divisions Contact details: Phone: +48 48 332-17-05 e-mail: komandor@komandor.pl

Sahara System contains 2 profiles. Sahara 1 is an economical narrow aluminum profile characterized by a refined but simple shape which makes light framing for door filling. Its subtlety and slender line cause that it perfectly emphasizes the materials of fillings, in other words, their colour, structure and surface beauty without dominating the door. It is ideal for interiors arranged in minimalist, marine, or even boho or vintage styles. Sahara 2 is an economical narrow aluminum profile having a rounded handle. Its subtle and simple shape creates light framing for door filling, while its slender and elongated line curiosly emphasizes the filling of the doors providing only a delicate complement to them. The system is ideal for minimalist, marine, boho, vintage, retro or classic interiors. Main advantage: • Popular, light and quiet sliding door system. • Door options: with uniform panel, combined of various materials or with an imitated partition with a decorative batten. • The buffer strips with short and long hair protecting from dust and damping sounds. . • The special anti-jumping function which prevents the door from falling out of the bottom track. • The pneumatic closing mechanisms provide for gentle door closing. • Mechanical lock and electronic lock options are available. Available options: • sliding doors • sliding door with divisions • pivoting doors • pivoting doors with divisions • slanted doors Contact details: Phone: +48 48 332-17-05 e-mail: komandor@komandor.pl

Aero is a frameless system which allows us to use a cellular board or another panel with the thickness of 28 to 38 mm as the door. Its major advantage is the total lack of profiles around the door the edges of which are finished with PVC veneer. The panel thickness and completely undisturbed door surface cause that visually the door looks very solid at the same time presenting the beauty of its filling material, mean the wood structure lines and surface texture. It is a perfect option not only for modern, minimalist and ascetic interiors but also those stylish with a touch of classics. Main advantage: • A light structure, without profiles • Possibility of using as an entrance door • Possibility of mounting and concealing the top track in the crevice of the wall or ceiling. • The pneumatic closing mechanisms provide for gentle door closing. • Big range of door thickness. • Hidden sliding mechanisms and invisible fastenings of the bottom track Available options: • Sliding doors • Hanging doors Contact details: Phone: +48 48 332-17-05 e-mail: komandor@komandor.pl

In its wide offer Komandor has also hanging doors which are both practical and aesthetic. The system of hanging doors is an ideal solution if we want to separate two independent spaces from each other and at the same time keep a comfortable passage between them. In such a case hanging doors become passage doors and allow us to use the space as it suits us, make it larger or smaller, as needed. They are available in single and double system. Single system – simple, slender in shape of aluminum profile in anode natural allows use only one filling in the door. As the door materials are visible from both sides, the best option would be glass or chipboard. Double system – classical aluminum profile with natural anodizing, designed to the use different fillings on each side of the door, what gives higher range of design options. Door opening is facilitated by an aesthetic handle being an integral part of the system. Main advantage: • A light structure, without the bottom track, with sliding mechanism in the top track. • Possibility of using as an entrance door with width of up to 1.5 m. • Possibility of mounting and concealing the bottom track in the crevice of the wall or ceiling. • Possibility of flexible arrangement and the use of different fillings on both sides of the door. • Mechanical lock option is available. • The pneumatic closing mechanisms provide for gentle door closing. Available options: • Hanging doors • Corner hanging doors, outer Contact details: Phone: +48 48 332-17-05 e-mail: komandor@komandor.pl

Complete toilet set: BTW Clean Rim WC pan P-trap outlet and bolting kit. Low cistern pan with lid and dual push-button mechanism 4,5/3 litres. Side inlet. Fixed seat. Chromed hinges. Options: Low cistern pan with lid and dual push-button mechanism 4,5/3 litres. Bottom left inlet. Soft-closing system seat.

Complete toilet set: BTW WC pan P-trap outlet and bolting kit. Low cistern pan with lid and dual push-button mechanism 4,5/3 litres. Side inlet. Fixed seat. Chromed hinges. Options: Low cistern pan with lid and dual push-button mechanism 4,5/3 litres. Bottom left inlet. Soft-closing system seat.

Complete toilet set: WC pan dual outlet. Low cistern with dual push-button mechanism 6/3 litres. Bottom left inlet. Fixed seat. Chromed hinges. Options: Low cistern with dual push-button mechanism 6/3 litres. Side inlet. Soft closing seat.

Complete toilet set: WC pan BTW dual outlet. Low cistern with dual push-button mechanism 6/3 litres. Bottom left inlet. Fixed seat. Chromed hinges. Options: Low cistern with dual push-button mechanism 6/3 litres. Side inlet. Soft closing seat.

Draft has an E3 enamel writing surface. The whiteboard is mobile, double-sided and has an anthracite-grey steel frame on wheels. The wheels are lockable. Under the writing areas there is an oak wooden box with a bottom covered in dark-grey felt, e.g. for storing pens and eraser. The wooden box is available either in natural oak or anthracite grey stain,which gives the product a warm expression.

VillaFönster's sliding slides are of lift-sliding construction and are specially designed for the Swedish market and our strict climate. The door is easily opened by turning the handle downwards, lifting the fitting and the door running freely. Ball bearing wheels at the bottom provide a quiet and smooth ride, facilitating opening and closing. The opening door runs on the inside of the solid glass. The door is delivered with internal handle in matt-brushed aluminum and lock of model european cylinder. Pre-mounted Adjufix frame sleeves simplify installation. The walking door's location is seen from the outside. Ex. Left door door = The left part from the outside is openable. Glass security Our lifting slides are always supplied with hardened, safety-proof glass. Performance Sleek straight profile on the inside and black sealing strip. Threshold of solid wood. Color Exterior / Inside: White painted wood in color NCS S 0502-Y gloss 40.

VillaFönster's sliding slides are of lift-sliding construction and are specially designed for the Swedish market and our strict climate. The door is easily opened by turning the handle downwards, lifting the fitting and the door running freely. Ball bearing wheels at the bottom provide a quiet and smooth ride, facilitating opening and closing. The opening door runs on the inside of the solid glass. The door is delivered with internal handle in matt-brushed aluminum and lock of model european cylinder. Pre-mounted Adjufix frame sleeves simplify installation. The walking door's location is seen from the outside. Ex. Left door door = The left part from the outside is openable. Glass security Our lifting slides are always supplied with hardened, safety-proof glass. Performance Sleek straight profile on the inside and black sealing strip. Threshold of solid wood. Color Exterior: Aluminum cladding white painted in color NCS S 0502-Y gloss 80. Inside: White painted wood in color NCS S 0502-Y gloss 40.

VillaFönster's sliding slides are of lift-sliding construction and are specially designed for the Swedish market and our strict climate. The door is easily opened by turning the handle downwards, lifting the fitting and the door running freely. Ball bearing wheels at the bottom provide a quiet and smooth ride, facilitating opening and closing. The opening door runs on the inside of the solid glass. The door is delivered with internal handle in matt-brushed aluminum and lock of model european cylinder. Pre-mounted Adjufix frame sleeves simplify installation. The walking door's location is seen from the outside. Ex. Left door door = The left part from the outside is openable. Glass security Our lifting slides are always supplied with hardened, safety-proof glass. Performance Sleek straight profile on the inside and black sealing strip. Threshold of solid wood. Color Oiled Ek

VillaFönster's sliding slides are of lift-sliding construction and are specially designed for the Swedish market and our strict climate. The door is easily opened by turning the handle downwards, lifting the fitting and the door running freely. Ball bearing wheels at the bottom provide a quiet and smooth ride, facilitating opening and closing. The opening doors run on the inside of the fixed glass. The door is delivered with internal handle in matt-brushed aluminum and lock of model european cylinder. Pre-mounted Adjufix frame sleeves simplify installation. The double doors are always located in the middle. Glass security Our lifting slides are always supplied with hardened, safety-proof glass. Performance Sleek straight profile on the inside and black sealing strip. Threshold of solid wood. Color Exterior / Inside: White painted wood in color NCS S 0502-Y gloss 40.

VillaFönster's sliding slides are of lift-sliding construction and are specially designed for the Swedish market and our strict climate. The door is easily opened by turning the handle downwards, lifting the fitting and the door running freely. Ball bearing wheels at the bottom provide a quiet and smooth ride, facilitating opening and closing. The opening doors run on the inside of the fixed glass. The door is delivered with internal handle in matt-brushed aluminum and lock of model european cylinder. Pre-mounted Adjufix frame sleeves simplify installation. The double doors are always located in the middle. Glass security Our lifting slides are always supplied with hardened, safety-proof glass. Performance Sleek straight profile on the inside and black sealing strip. Threshold of solid wood. Color Exterior: Aluminum cladding white painted in color NCS S 0502-Y gloss 80. Inside: White painted wood in color NCS S 0502-Y gloss 40.

VillaFönster's sliding slides are of lift-sliding construction and are specially designed for the Swedish market and our strict climate. The door is easily opened by turning the handle downwards, lifting the fitting and the door running freely. Ball bearing wheels at the bottom provide a quiet and smooth ride, facilitating opening and closing. The opening doors run on the inside of the fixed glass. The door is delivered with internal handle in matt-brushed aluminum and lock of model european cylinder. Pre-mounted Adjufix frame sleeves simplify installation. The double doors are always located in the middle. Glass security Our lifting slides are always supplied with hardened, safety-proof glass. Performance Sleek straight profile on the inside and black sealing strip. Threshold of solid wood. Color Oiled oak

Hollow clay infill blocks are especially recommended for one-way ribbed slabs with block filler with either steel or precast concrete joists. These hollow blocks are manufactured according to the highest quality and environmental standards. The design of the hollow clay infill block, with vertical partitions and triangular reinforcements at the top and bottom, provides optimum resistance. This feature, along with a near zero breakage rate, make the hollow clay infill block for ribbed slabs an essential constructive element in any high quality and energy-efficient building. The main advantages of ribbed floor slabs over solid concrete slabs are: [LIST] Savings in structural steel, due to its lighter weight Lower labour costs due to its easy assembly Better acoustic and thermal insulation Safe usage due to its high mechanical resistance Excellent adherence with gypsum, mortar and concrete [/LIST] The 12 x 70 cm format is mostly used along the Spanish Mediterranean coast, where it fits perfectly the constructive needs of the area.

Hollow clay infill blocks are especially recommended for one-way ribbed slabs with block filler with either steel or precast concrete joists. These hollow blocks are manufactured according to the highest quality and environmental standards. The design of the hollow clay infill block, with vertical partitions and triangular reinforcements at the top and bottom, provides optimum resistance. This feature, along with a near zero breakage rate, make the hollow clay infill block for ribbed slabs an essential constructive element in any high quality and energy-efficient building. The main advantages of ribbed floor slabs over solid concrete slabs are: [LIST] Savings in structural steel, due to its lighter weight Lower labour costs due to its easy assembly Better acoustic and thermal insulation Safe usage due to its high mechanical resistance Excellent adherence with gypsum, mortar and concrete [/LIST] Versatile and easy to use.

Hollow clay infill blocks are especially recommended for one-way ribbed slabs with block filler with either steel or precast concrete joists. These hollow blocks are manufactured according to the highest quality and environmental standards. The design of the hollow clay infill block, with vertical partitions and triangular reinforcements at the top and bottom, provides optimum resistance. This feature, along with a near zero breakage rate, make the hollow clay infill block for ribbed slabs an essential constructive element in any high quality and energy-efficient building. The main advantages of ribbed floor slabs over solid concrete slabs are: [LIST] Savings in structural steel, due to its lighter weight Lower labour costs due to its easy assembly Better acoustic and thermal insulation Safe usage due to its high mechanical resistance Excellent adherence with gypsum, mortar and concrete [/LIST] The 20x70 cm format is a great choice for medium-depth slabs, and it is easy to use.

Hollow clay infill blocks are especially recommended for one-way ribbed slabs with block filler with either steel or precast concrete joists. These hollow blocks are manufactured according to the highest quality and environmental standards. The design of the hollow clay infill block, with vertical partitions and triangular reinforcements at the top and bottom, provides optimum resistance. This feature, along with a near zero breakage rate, make the hollow clay infill block for ribbed slabs an essential constructive element in any high quality and energy-efficient building. The main advantages of ribbed floor slabs over solid concrete slabs are: [LIST] Savings in structural steel, due to its lighter weight Lower labour costs due to its easy assembly Better acoustic and thermal insulation Safe usage due to its high mechanical resistance Excellent adherence with gypsum, mortar and concrete [/LIST] The 22x70 cm format is a great choice for medium-depth slabs, and it is easy to use.

Hollow clay infill blocks are especially recommended for one-way ribbed slabs with block filler with either steel or precast concrete joists. These hollow blocks are manufactured according to the highest quality and environmental standards. The design of the hollow clay infill block, with vertical partitions and triangular reinforcements at the top and bottom, provides optimum resistance. This feature, along with a near zero breakage rate, make the hollow clay infill block for ribbed slabs an essential constructive element in any high quality and energy-efficient building. The main advantages of ribbed floor slabs over solid concrete slabs are: [LIST] Savings in structural steel, due to its lighter weight Lower labour costs due to its easy assembly Better acoustic and thermal insulation Safe usage due to its high mechanical resistance Excellent adherence with gypsum, mortar and concrete [/LIST] The 25 x 70 cm infill block is especially recommended for deep slabs with high mechanical resistance requirements.

Arco 50 hollow clay infill block is especially recommended for one-way ribbed slabs, with either steel or precast concrete joists. Its innovative design with vaulted bottom, recreates vernacular interiors with a modern twist. Clay infill block Arco 50 is a versatile interior design element. It can be left untreated, showing its red earthy tones, but it can also be painted or varnished in any desired colour or even rendered. Whatever the chosen finish, it will give any ceiling a unique look. Arco 50 hollow clay infill block rests on the joists’ flanges, increasing its depth from 130 mm to 160 mm approx. This infill block has been manufactured according to the highest environmental and quality standards.

Thermopanel V4 represents a radiator concept, developed to meet high demands for efficient logistics and modern design. A radiator shipped complete from the factory, with everything in place. No loose parts and no extra assembly work. Just screw the supplied brackets, hang up the radiator and connect to the waterbased heating system. Easy, fast and efficient! Thermopanel has unique and appreciated properties. The patented V4 valve is welded hidden behind the radiator body, with a completely unique method for the industry. No visible pipes and full freedom to install the radiator for either bottom or side connection. Thermopanel V4 is always supplied with side plates and grids. Thermopanel has been developed with the focus on logistic completion. By producing the radiator ready for installation in a modern production line, production, distribution and handling are streamlined by warehouse wholesalers. The installer reduces assembly time and eliminates the risk of incorrect or missing items.

Thermopanel V4 Plan represents a radiator concept, developed to meet high demands for efficient logistics and modern design and with a total flat front panel. A radiator shipped complete from the factory, with everything in place. No loose parts and no extra assembly work. Just screw the supplied brackets, hang up the radiator and connect to the waterbased heating system. Easy, fast and efficient! Thermopanel Plan has unique and appreciated properties. The patented V4 valve is welded hidden behind the radiator body, with a completely unique method for the industry. No visible pipes and full freedom to install the radiator for either bottom or side connection. Thermopanel Plan is always supplied with side plates and grids. Thermopanel Plan has been developed with the focus on logistic completion. By producing the radiator ready for installation in a modern production line, production, distribution and handling are streamlined by warehouse wholesalers. The installer reduces assembly time and eliminates the risk of incorrect or missing items.

Thermopanel V4 Ramo represents a radiator concept, developed to meet high demands for efficient logistics and modern design and with a flat front panel with decorative lines. A radiator shipped complete from the factory, with everything in place. No loose parts and no extra assembly work. Just screw the supplied brackets, hang up the radiator and connect to the waterbased heating system. Easy, fast and efficient! Thermopanel Ramo has unique and appreciated properties. The patented V4 valve is welded hidden behind the radiator body, with a completely unique method for the industry. No visible pipes and full freedom to install the radiator for either bottom or side connection. Thermopanel Ramo is always supplied with side plates and grids. Thermopanel Ramo has been developed with the focus on logistic completion. By producing the radiator ready for installation in a modern production line, production, distribution and handling are streamlined by warehouse wholesalers. The installer reduces assembly time and eliminates the risk of incorrect or missing items.

Toilet paper dispenser Holds two rolls up to 5-1/4" (133 mm) diameter (1800 sheets). Top roll automatically drops in place when bottom roll is used up. Type 304 stainless steel cabinet and mechanism. Theft resistant spindles.

Tube handle, round splash guard and storage cylinder of this wall-mounted unit are fabricated of satin-finish stainless steel. Includes a drip cup at the bottom for easy cleaning. Brush is made of PVC with a polypropylene shaft. 15-1/2″ (394 mm) from bottom of base to top of handle and extends 5-1⁄8″ (131 mm) from wall. Allows for easy cleaning while maintaining an elegant washroom.

This product is only available for the Swedish market. Alterna Rash crate has a functional design and is made of stainless steel. Available in two different models, one with splash protection and bottom valve, one with splash protection, bottom valve and overflow.

This product is only available for the Swedish market. Alterna Picto Shower Walls are single-packed and reversible shower doors that can be combined in any way. Combine between straight and curved shower doors, 4 sizes and 3 glas types. For a pre-assembled standard solution, you can choose Picto Shower Corner. With Picto Shower Walls you will find a solution for most needs. All shower doors have adjustable wall profiles, they are raised 4.5 mm at opening and are delivered complete with bottom barrier, handle, screw and plug. 3 glass types: clear, grayscale and frosted glass 70, 80, 90 and 100 cm Reversible doors 6 mm hardened safety glass Polished aluminum profiles Height: 1 950 mm Door knobs in chromed brass

This product is only available for the Swedish market. Alterna Picto Shower Walls are single-packed and reversible shower doors that can be combined in any way. Combine between straight and curved shower doors, 4 sizes and 3 glass types. For a pre-assembled standard solution, you can choose Picto Shower Corner. With Picto Shower Walls you will find a solution for most needs. All shower doors have adjustable wall profiles, they are raised 4.5 mm at the opening and are delivered complete with bottom barrier, handle, screw and plug. 3 glass types: clear, grayscale and frosted glass 70, 80, 90 and 100 cm Reversible doors 6 mm tempered safety glass Polished aluminum profiles Height: 1 950 mm Door knobs in chromed brass

This product is only available for the Swedish market. Alterna U-shower allows for many different types of installations: mount in corners, on a straight wall or by a window. The doors can also be opened inwards, to save space. The shower doors have adjustable wall profiles and they are raised 5 mm at opening. Comes complete with bottom barrier, screw and plug. 2 doors Silver colored aluminum profiles Clear glass 6 mm tempered safety glass Room for outside pipes 25-35 mm Adjustable wall profiles 10 mm

K2 Caddy cleans the mess on your desk. Whether you wish for a graphic or a minimalistic look, the K2 Caddy is adjustable to your needs. Organise your folders in the bottom drawer or insert an extra drawer on the inside to store anything from paper clips to post-its.

In the beginning K2 Seat might seem like an advanced balance exercise, but as soon as you get your grip on it the comfort is incomparable to any other pouf. Besides strengthening your balance and posture the K2 Seat creates an exceptional experience. In meetings the K2 Seat opens up for playful ideas and a dynamic dialog. But the pouf works at the dining table, at your desk or in the living room as well. The ergonomic bottom of the pouf is made of solid cork with an integrated tilt that makes sure that the K2 Seat can gently move around on the floor without making any noise or damage. The optional hook, which is fastened on the bottom under the upholstery, makes it possible to easily move the pouf around if you wish to do so.

Refrigerated Cabinet AGR 1002 GN 2/1 - AISI-304 stainless steel exterior, rear side galvanized panel - AISI-304 stainless steel interior, stamped bottom and rounded corners - AISI-304 stainless steel inner sides, 24 press-formed supports for GN 2/1 containers or shelves - Doors with self closing system, blocked opening, magnetic gasket and possibility of changing the opening sense - Key lock as standard - LED lighting - GN 2/1 shelves made of plasticized steel wire, height adjustable - AISI -304 adjustable legs, 135 to 200 mm - Hinged front control panel, allows easy access to the condenser unit - Monoblock refrigeration system: condenser unit + evaporator - Fan assisted condenser unit - Fan assisted evaporator, with epoxi anticorrosion coating - Evaporator fan stops when door is opened - Automatic evaporation of defrost water - 40 Kg/m³ density polyurethane insulation, zero GWP and zero ODP - Digital temperature control, optimized defrost, door open and hightemperature condensation alarms. Efficient management of energy consumption

The Vector™ SUBD18 is a direct-radiating, vented subwoofer featuring two high-power, long-excursion 18” (457 mm) transducers. It is designed to provide extended low frequency support for use with CS and CD series Vector Performance Loudspeakers, and is capable of producing articulate and impactful deep bass response for all types of installed music and multimedia applications. The Vector SUBD18 requires use with a Crestron Avia™ DSP to ensure rated performance and reliable operation. It can be driven using either one or two amplifier channels. Its enclosure is optimally tuned to provide maximum low frequency output in a low-profile package designed to fit under low stages and other confined spaces. Vibration isolation feet are provided on the bottom, with aligned recesses on top for stacking of multiple units. Concealed M10 mounting points are included to allow for suspended installation using forged shoulder eyebolts (sold separately).

A higher standard of security, with a slim design! Buildings, commercial outlets and premises with a high risk of break-in (e.g. banks, jeweller’s shops, etc.) require an entrance that is both secure and pleasing to the eye. With their slim aluminium profiles, Gilgen SLX-M RC2 and SLX-M RC3 (equivalent to PAS24) automatic doors offer a design that is invitingly transparent. The automatic locking, reinforced safety glass and flush bottom guide rails are designed to ensure efficient break-in prevention.

A higher standard of security, with a slim design! Buildings, commercial outlets and premises with a high risk of break-in (e.g. banks, jeweller’s shops, etc.) require an entrance that is both secure and pleasing to the eye. With their slim aluminium profiles, Gilgen SLX-M RC2 and SLX-M RC3 (equivalent to PAS24) automatic doors offer a design that is invitingly transparent. The automatic locking, reinforced safety glass and flush bottom guide rails are designed to ensure efficient break-in prevention.

A higher standard of security, with a slim design! Buildings, commercial outlets and premises with a high risk of break-in (e.g. banks, jeweller’s shops, etc.) require an entrance that is both secure and pleasing to the eye. With their slim aluminium profiles, Gilgen SLX-M RC2 and SLX-M RC3 (equivalent to PAS24) automatic doors offer a design that is invitingly transparent. The automatic locking, reinforced safety glass and flush bottom guide rails are designed to ensure efficient break-in prevention.

A higher standard of security, with a slim design! Buildings, commercial outlets and premises with a high risk of break-in (e.g. banks, jeweller’s shops, etc.) require an entrance that is both secure and pleasing to the eye. With their slim aluminium profiles, Gilgen SLX-M RC2 and SLX-M RC3 (equivalent to PAS24) automatic doors offer a design that is invitingly transparent. The automatic locking, reinforced safety glass and flush bottom guide rails are designed to ensure efficient break-in prevention.

A higher standard of security, with a slim design! Buildings, commercial outlets and premises with a high risk of break-in (e.g. banks, jeweller’s shops, etc.) require an entrance that is both secure and pleasing to the eye. With their slim aluminium profiles, Gilgen SLX-M RC2 and SLX-M RC3 (equivalent to PAS24) automatic doors offer a design that is invitingly transparent. The automatic locking, reinforced safety glass and flush bottom guide rails are designed to ensure efficient break-in prevention.

Refrigerated Cabinet AGR 751 GN 2/1 - AISI-304 stainless steel exterior, rear side galvanized panel - AISI-304 stainless steel interior, stamped bottom and rounded corners - Doors with self closing system, blocked opening, magnetic gasket and possibility of changing the opening sense - Inner side of doors by stamped steel - Key lock as standard - Inner side of doors by stamped steel - Interior LED lighting - GN 2/1 shelves made of plasticized steel wire, height adjustable - AISI -304 adjustable legs, 135 to 210 mm - Control panel and engine ventilation grill, removable - Fan assisted condenser unit - Fan assisted evaporator, with epoxi anticorrosion coating - Evaporator fan stops when door is opened - Automatic evaporation of defrost water - 40 Kg/m³ density polyurethane insulation, zero ODP and GWP - Digital temperature control, optimized defrost, door open and hightemperature condensation alarms. Efficient management of energy consumption - Operating temperature 38°C ambient

Refrigerated Counter MRG-150 (GN 1/1) - AISI-304 stainless steel exterior, rear side galvanized panel - AISI-304 stainless steel interior, stamped bottom and rounded corners - Doors with self closing system, blocked opening, magnetic gasket and possibility of changing the opening sense - AISI-304 stainless steel worktop, with rounded front and 100 mm sanitary upstand (optional without upstand) - GN 1/1 shelves made of plasticized steel wire, height adjustable - AISI -304 adjustable legs, 125 to 200 mm - Removable and fan assisted condenser unit - Fan assisted evaporator, with epoxi anticorrosion coating. - Automatic evaporation of defrost water - 40 Kg/m³ density polyurethane insulation, zero ODP and GWP - Digital temperature control, optimized defrost, high-temperature condensation alarm. Efficient management of energy consumption - Operating temperature: MRG / MCG 38°C ambient MRGV / MCGV 32°C ambient

Refrigerated Counter MRG-200 (GN 1/1) - AISI-304 stainless steel exterior, rear side galvanized panel - AISI-304 stainless steel interior, stamped bottom and rounded corners - Doors with self closing system, blocked opening, magnetic gasket and possibility of changing the opening sense - AISI-304 stainless steel worktop, with rounded front and 100 mm sanitary upstand (optional without upstand) - GN 1/1 shelves made of plasticized steel wire, height adjustable - AISI -304 adjustable legs, 125 to 200 mm - Removable and fan assisted condenser unit - Fan assisted evaporator, with epoxi anticorrosion coating. - Automatic evaporation of defrost water - 40 Kg/m³ density polyurethane insulation, zero ODP and GWP - Digital temperature control, optimized defrost, high-temperature condensation alarm. Efficient management of energy consumption - Operating temperature: MRG / MCG 38°C ambient MRGV / MCGV 32°C ambient

Under-broiler Refrigerated Drawers KBR-47 - AISI-304 stainless steel exterior, rear side galvanized panel - AISI-304 stainless steel interior, stamped bottom and rounded corners - Stainless steel drawers with telescopic stainless steel slides for complete opening, self-closing system as standard - AISI-304 stainless steel worktop, with rounded front (optional with 100 mm sanitary upstand) - Worktop can be customized on demand - AISI -304 adjustable legs, 90 to 125 mm - Removable and fan assisted condenser unit - Fan assisted evaporator, with epoxi anticorrosion coating. - Automatic evaporation of defrost water - 40 Kg/m³ density polyurethane insulation, cero GWP and zero ODP effect Digital temperature control, optimized defrost, high-temperature condensation alarm. Efficient management of energy consumption - Operating temperature 38°C ambient

Refrigerated Cabinet AGR-50 - AISI-304 stainless steel exterior, rear side galvanized panel - AISI-304 stainless steel interior, stamped bottom and rounded corners - Doors with self closing system, blocked opening, magnetic gasket and possibility of changing the opening sense - Key lock as standard - AGRE / ACGE double glazed door + LEDS - GN shelves made of plasticized steel wire, height adjustable - AISI -304 adjustable legs, 135 to 210 mm - Control panel and engine ventilation grill, removable - Fan assisted condenser unit - Fan assisted evaporator, with epoxi anticorrosion coating - Evaporator fan stops when door is opened - Automatic evaporation of defrost water - 40 Kg/m³ density polyurethane insulation, zero ODP and GWP - Digital temperature control, optimized defrost, door open and hightemperature condensation alarms. Efficient management of energy consumption - Operating temperature 32°C ambient

Over-counter Refrigerated Display BCS-6 - AISI-304 18/10 stainless steel exterior - AISI-304 18/10 stainless steel stamped bottom - Toughened safety glass - LED lighting - Transparent sliding doors - 40 Kg/m³ density polyurethane insulation, zero ODP and GWP - Adjustable supports - Interior lighting - Fan assisted condenser unit - Temperature and defrost sets by digital electronic control - Operating temperature 0° +5° , 32°C ambient

Refrigerated Counter FMRV-200 - Standard, two drawers, coffee-grounds hopper optional - Removable and fan assisted condenser unit - Automatic evaporation of defrost water - AISI-304 stainless steel exterior, rear side galvanized panel - AISI-304 stainless steel interior, stamped bottom and rounded corners - Doors with self closing system, blocked opening, magnetic gasket and possibility of changing the opening sense - Double glazed door - Interior LEDs lighting as standard - AISI-304 stainless steel worktop, with rounded front and 100 mm sanitary upstand (optional without upstand) - Shelves made of plasticized steel wire, height adjustable by stainless steel supports - AISI -304 adjustable legs, 125 to 200 mm - Fan assisted evaporator, with epoxi anticorrosion coating. - 40 Kg/m³ density polyurethane insulation, zero ODP and GWP - Digital temperature control, optimized defrost, high-temperature condensation alarm (FMRV). Efficient management of energy consumption - Operating temperature, 32°C ambient

Refrigerated Counter MFB-160-CC - AISI-304 stainless steel exterior, rear side galvanized panel - AISI-304 stainless steel interior, stamped bottom and rounded corners - MFB-CC: Stainless steel drawers with telescopic stainless steel slides for complete opening, self-closing system as standard - AISI-304 stainless steel worktop, with rounded front (optional with 100 mm sanitary upstand) - Worktop can be customized on demand - AISI -304 adjustable legs, 90 to 125 mm - Removable and fan assisted condenser unit - CENTRAL Fan assisted evaporator, with epoxi anticorrosion coating. - Automatic evaporation of defrost water - 40 Kg/m³ density polyurethane insulation, cero GWP and zero ODP effect Digital temperature control, optimized defrost, high-temperature condensation alarm. Efficient management of energy consumption - Operating temperature 38°C ambient

Refrigerated Counter MFCG-200 - AISI-304 stainless steel exterior, rear side galvanized panel - AISI-304 stainless steel interior, stamped bottom and rounded corners - Doors with self closing system, blocked opening, magnetic gasket and possibility of changing the opening sense - Inner side of doors by stamped steel - AISI-304 stainless steel worktop, with rounded fronts - GN 1/1 shelves made of plasticized steel wire, height adjustable - AISI -304 adjustable legs, 125 to 200 mm - Removable and fan assisted condenser unit - Fan assisted evaporator, with epoxi anticorrosion coating. - Automatic evaporation of defrost water - 40 Kg/m³ density polyurethane insulation, zero ODP and GWP - Digital temperature control, optimized defrost, high-temperature condensation alarm. Efficient management of energy consumption - Operating temperature 38°C ambient

AISI-304 stainless steel exterior, rear side galvanized panel - AISI-304 stainless steel interior, stamped bottom and rounded corners - Doors with self closing system, blocked opening, magnetic gasket and possibility of changing the opening sense - Inner side of doors by stamped steel - Stainless steel worktop, integrated topping unit with inged lid, GN 1/3- 100 capacity - GN 1/3-150 topping unit - Capacity for 60x40 shelves, containers or trays by stainless steel slides, height adjustable - AISI -304 adjustable legs, 135 to 210 mm - Removable and fan assisted condenser unit - Fan assisted evaporator, with epoxi anticorrosion coating. - Automatic evaporation of defrost water - 40 Kg/m³ density polyurethane insulation, zero ODP and GWP - Digital temperature control, optimized defrost, high-temperature condensation alarm. Efficient management of energy consumption - Operating temperature, 32°C ambient - OPTIONAL: 525x400 working grill with drip pan

Refrigerated Preparation Counter PC80-200 - AISI-304 stainless steel exterior, rear side included - AISI-304 stainless steel interior, stamped bottom and rounded corners - Doors with self closing system, blocked opening, magnetic gasket and possibility of changing the opening sense - Inner side of doors by stamped steel - AISI-304 worktop, capacity for GN containers (see detail) - Poliethylene cutting table - Fixed pan dividers (detachable for cleaning) - Heavy-duty double liftable glass lid to keep temperature in the GN pans - Maximum product visibility (LEDs optional) - Perimetral gasket arround the lid structure - Piston system to help the opening /closing of the structure- Shelves made of plasticized steel wire, height adjustable by stainless steel slides - AISI -304 adjustable legs, 135 to 210 mm - Removable and fan assisted condenser unit - Fan assisted evaporator, with epoxi anticorrosion coating. - Automatic evaporation of defrost water - 40 Kg/m³ density polyurethane insulation, zero ODP and GWP - Digital temperature control, optimized defrost, high-temperature condensation alarm. Efficient management of energy consumption - Operating temperature 32°C ambient

Range 477 Toilet brush unit - brush handle with replaceable brush head made of black polyamide - brush holder with curved bottom and spherical, semi-open top in ring-shaped bracket - top part can be rotated - container is removable, but can also be fitted to prevent theft - brush head can be replaced due to bayonet fixing - anti-theft protection through concealed screw fixing - 141 mm wide, 470 mm high and 140 mm deep - made of high-quality polyamide according to HEWI colour chart Article no.: HEWI 477.20.100

Range 805 Classic Toilet brush unit - brush handle with replaceable brush head made of black polyamide - brush holder with curved bottom and spherical, semi-open top in ring-shaped bracket - suspended brush - top part can be rotated - container is removable, but can also be fitted to prevent theft - brush head can be replaced due to bayonet fixing - anti-theft protection through concealed screw fixing - 141 mm wide, 470 mm high and 140 mm deep - container made of high-quality polyamide in HEWI colours 90 (jet black), 92 (anthracite grey), 98 (signal white) or 99 (pure white) - holder and brush handle made of high-quality stainless steel, satin surface finish Article no.: HEWI 805.20.100

Hinged support rail Duo System 800 K - with two gripping levels arranged above each other - upper rail is merged with the top rail at an angle of 135° - upper rail (diameter 33 mm) for holding on to and providing support - bottom rail (diameter 25 mm) starts at a distance of 250 mm from the front edge of the upper rail and is used for holding on to and for turning in from the side - 700 mm projection, wall mounting plate 181 mm high and 130 mm wide - can be folded upwards and, folded downwards with braking mechanism - made of high-quality chrome-look coated polyamide that is warm to touch - with continuous anti-corrosion steel core and integrated wall mounting plate made of steel with cover made of chrome-look coated polyamide - stable three-point fixing - for wall mounting with concealed, non-corrosive and tested fixing materials for different wall systems - with toilet roll holder 950.50.01050, toilet roll holder with WC flushing mechanism and function button (radio-controlled) 950.50.06290 (right), 950.50.06390 (left), and floor supports 950.50.020XA, 950.50.025XA and 950.50.026XA for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the ÖNORM B1600/1601 and SIA 500 requirements Article no.: HEWI 950.50.12050

Hinged support rail Duo - with two gripping levels arranged above each other - upper rail is merged with the top rail at an angle of 135° - upper rail made of rectangular profile, 40 mm wide and 30 mm, provides a wide support surface and large radii for pleasant gripping, used to hold on tight and for support - bottom rail (diameter 25 mm) starts at a distance of 250 mm from the front edge of the upper rail and is used for holding on to and for turning in from the side - 700 mm projection, wall mounting plate 181 mm high and 130 mm wide - can be folded upwards and, folded downwards with braking mechanism - made of metal, high-quality chrome-plated - wall-mounting plate cover made of high-quality chrome-plated synthetic material - stable three-point fixing - for wall mounting with concealed, non-corrosive and tested fixing materials for different wall systems - with toilet roll holder 950.50.01150, toilet roll holder with WC flushing mechanism and function button (radio-controlled) 950.50.06490 (right), 950.50.06590 (left), floor supports 950.50.020XA, 950.50.025XA, 950.50.026XA and arm pad 950.50.03192 for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC - fulfils the ÖNORM B1600/1601 and SIA 500 requirements Article no.: HEWI 950.50.62040

System 162 push/pull handle set for equipping doors or emergency exits For emergency exits: Approval to EN 179 in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634 and 9 mm square spindle. Suitable as operating element on doors to DIN 18040, with accessibility function within operating range at 850 mm above FFL. Handle made of a stainless steel tube, diameter 30 mm, straight handle with straight connection, height 450 mm, width 124 mm, satin surface, backplates made of metal with polyamide cap, maintenance-free plain bearings, mechanical adjustment for the pull handle. Fast installation on the door due to already preassembled pull handles on the bottom section. Installation in pairs, function in opening direction - push, function in opposite direction - pull, with continuous spindle. Classification: spindle 8 mm - no classification spindle 9 mm Designed and tested for projects, classification to EN 179 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class 0, A or B Safety - personal protection: Class 1 Corrosion protection: Class 3 Security - burglary protection: Class 2 Projection of operating element: Class 1 Type of operation: B Field of door application: Class A, B, C or D The classification results only in connection with the lock according to EN 179, for example, BKS, Fuhr or Fliether The selected combinations are assigned freely and do not have to take on a lock manufacturer. For more information, contact HEWI or the lock manufacturer! Article no.: HEWI 162XADG06

System 111 push/pull handle set Handle made of polyamide, with steel core diameter 33 mm, closed oval, height 400 mm, width 105 mm, high polished, backplates made of metal with polyamide cap, maintenance-free plain bearings, mechanical adjustment for the pull handle. Fast installation on the door due to already preassembled pull handles on the bottom section. Suitable as operating element on doors to DIN 18040, with accessibility function within operating range at 850 mm above FFL. Contrasting design in coloured polyamide. Installation in pairs, function in opening direction - push, function in opposite direction - pull, with continuous spindle. Classification key: spindle 8 mm - no classification spindle 9 mm Designed and tested for projects, classification to EN 179 Category of use: Class 3 Durability: Class 7 Door weight: Class 6 Use on smoke/fire doors: Class 0. A or B Safety personal security: Class 1 Corrosion resistance: Class 3 Security: Class 2 Security - Burglary protection: Class 1 Type of operation: B Field of door application: Class A, B, C or D The classification results only in connection with the lock according to EN 179, for example, BKS, Fuhr or Fliether The selected combinations are assigned freely and do not have to take on a lock manufacturer. For more information, contact HEWI or the lock manufacturer! Article no.: HEWI FSDG550.08

Has two opening doors with transparent seals on bottom edges. Doors can be folded inwards when shower is not in use to maximise floor space. No threshold – allows disabled access. 6 mm toughened safety glass.Wall profile allows pipe installation 30 mm from wall. The shower walls can be supplemented with 20 or 40 mm wall profiles. Height 198 cm. Door opening 101-130 cm. The measurements are reversible for right or left fitting.

Has two opening doors with transparent seals on bottom edges. Doors can be folded inwards when shower is not in use to maximise floor space. No threshold – allows disabled access. 6 mm toughened safety glass.Wall profile allows pipe installation 30 mm from wall. The shower walls can be supplemented with 20 or 40 mm wall profiles. Height 198 cm. Door opening 101-130 cm. The measurements are reversible for right or left fitting.

Has two opening doors with transparent seals on bottom edges. Doors can be folded inwards when shower is not in use to maximise floor space. No threshold – allows disabled access. 6 mm toughened safety glass.Wall profile allows pipe installation 30 mm from wall. The shower walls can be supplemented with 20 or 40 mm wall profiles. Height 198 cm. Door opening 101-130 cm. The measurements are reversible for right or left fitting.

Has two opening doors with transparent seals on bottom edges. Doors can be folded inwards when shower is not in use to maximise floor space. No threshold – allows disabled access. 6 mm toughened safety glass.Wall profile allows pipe installation 30 mm from wall. The shower walls can be supplemented with 20 or 40 mm wall profiles. Height 198 cm. Door opening 101-130 cm. The measurements are reversible for right or left fitting.

Has two opening doors with transparent seals on bottom edges. Doors can be folded inwards when shower is not in use to maximise floor space. No threshold – allows disabled access. 6 mm toughened safety glass.Wall profile allows pipe installation 30 mm from wall. The shower walls can be supplemented with 20 or 40 mm wall profiles. Height 198 cm. Door opening 88-130 cm. The measurements are reversible for right or left fitting.

Has two opening doors with transparent seals on bottom edges. Doors can be folded inwards when shower is not in use to maximise floor space. No threshold – allows disabled access. 6 mm toughened safety glass.Wall profile allows pipe installation 30 mm from wall. The shower walls can be supplemented with 20 or 40 mm wall profiles. Height 198 cm. Door opening 88-130 cm. The measurements are reversible for right or left fitting.

Has two opening doors with transparent seals on bottom edges. Doors can be folded inwards when shower is not in use to maximise floor space. No threshold – allows disabled access. 6 mm toughened safety glass.Wall profile allows pipe installation 30 mm from wall. The shower walls can be supplemented with 20 or 40 mm wall profiles. Height 198 cm. Door opening 88-130 cm. The measurements are reversible for right or left fitting.

Has two opening doors with transparent seals on bottom edges. Doors can be folded inwards when shower is not in use to maximise floor space. No threshold – allows disabled access. 6 mm toughened safety glass.Wall profile allows pipe installation 30 mm from wall. The shower walls can be supplemented with 20 or 40 mm wall profiles. Height 198 cm. Door opening 88-130 cm. The measurements are reversible for right or left fitting.

Has two opening doors with transparent seals on bottom edges. Doors can be folded inwards when shower is not in use to maximise floor space. No threshold – allows disabled access. 6 mm toughened safety glass.Wall profile allows pipe installation 30 mm from wall. The shower walls can be supplemented with 20 or 40 mm wall profiles. Height 198 cm. Door opening 88-130 cm. The measurements are reversible for right or left fitting.

Has two opening doors with transparent seals on bottom edges. Doors can be folded inwards when shower is not in use to maximise floor space. No threshold – allows disabled access. 6 mm toughened safety glass.Wall profile allows pipe installation 30 mm from wall. The shower walls can be supplemented with 20 or 40 mm wall profiles. Height 198 cm. Door opening 88-130 cm. The measurements are reversible for right or left fitting.

Consists of two doors with transparent sealing strip at the bottom. The doors can be folded inwards when the shower is not in use,Maximize the free floor space. No threshold - allows disabled access. Tempered safety glass 6 mm. Wall Profile allows piping 25mm from the wall. The shower walls can be supplemented with wall profiles 20 or 40 mm. Height 198 cm.

Has two opening doors with transparent seals on bottom edges. Doors can be folded inwards when shower is not in use to maximise floor space. No threshold – allows disabled access. 6 mm toughened safety glass.Wall profile allows pipe installation 30 mm from wall. The shower walls can be supplemented with 20 or 40 mm wall profiles. Height 198 cm.

Has two opening doors with transparent seals on bottom edges. Doors can be folded inwards when shower is not in use to maximise floor space. No threshold – allows disabled access. 6 mm toughened safety glass.Wall profile allows pipe installation 30 mm from wall. The shower walls can be supplemented with 20 or 40 mm wall profiles. Height 198 cm.

Window opening inside : Inwards opening 1 or 2 leafs, with or without one tilt&turn leaf and bottom hung opening Complete thermal break (frame, opening and threshold) Clipped window sill after frame mounting Glazing thickness of 24, 30, 42 or 48 mm (double or triple). Insulated glazing with argon filling

Recycle bins that stay in place and are easy to empty. The bins connect to each other as many as desired for recycling. The Radius Series of solid metal accessories are designed with the Green Furniture Concept seating series Nova C and IOU in mind, but also work very well as stand-alone products. Material: Powder coated steel (color of choice) 80-liter individual volume. Internal container with handles for quick emptying. Weighted bottom makes also one piece stable. Standard recycling texts/icons: Glass, Paper, Trash Custom color lids, text and icons on the lids available.

Vertical feed tank - Bottom feed, silencer, acoustic class 1 1 double flush valve 3/6 l 1 set of bowl / tank attachments