Window frame with louvers to cover ventilation outlets on building facade.

double blind vent block

Window frame with louvers to cover ventilation outlets on building facade.

Window frame with louvers to cover ventilation outlets on building facade.

Inward opening, highly thermally insulated aluminium window system [LIST] Optimum thermal insulation with Uw values to 1.0 Uf value W/(m²K) Innovative PA insulting bar contour with increased proportion of foam Versatile and modular fittings solutions, concealed and surface-mounted with burglar resistance up to RC 2 Vast range of design options due to rebated and flush-fitted vent appearance on the outside Ventilation vents can be used in all outer frames of the standard systems, block series and window façades but as well as in the façade Cover profiles and multi-functional corner pieces for easy, time-saving fabrication Concealed and surface-mounted manual fittings solutions based on Schüco AvanTec SimplySmart as well as the mechatronic Schüco TipTronic fitting [/LIST]

Svita Sky Vent System consist of fire ventilator, control unit, sensors and button for manual operation. Fire ventilator Sky Vent is equipped with an electro-mechanical opening device powered with 48 V DC which guarantees a large opening force and allows the system to handle large snow loads. Sky Vent fire ventilator is upward opening and equipped with a dome of 2,3 or 4 layers of acrylic, clear or opal. The lid opening angle exceeds 140 degrees. Upstand height 250 or 500 mm in the standard version, height up to 1000 mm is possible, the upstand is insulated with 50mm mineral wool. Fall protection mounted in the upstand by default. Size from 1000 x 1000 to 2400 x 1200 mm. The control unit contains battery as power back up source in case of power failure, accessories for comfort ventilation, such as wind and rain sensors are available. Intrusion Grids, flashings and separate indication for open ventilator available as accessory. The fire ventilators are certified according to EN 12101-2 and fulfills the requirements of SS 883006.

Svita Sky Vent System consist of fire ventilator, control unit, sensors and button for manual operation. Fire ventilator Sky Vent is equipped with an electro-mechanical opening device powered with 48 V DC which guarantees a large opening force and allows the system to handle large snow loads. Sky Vent fire ventilator is upward opening and equipped with a dome of 2,3 or 4 layers of acrylic, clear or opal. The lid opening angle exceeds 140 degrees. Upstand height 250 or 500 mm in the standard version, height up to 1000 mm is possible, the upstand is insulated with 50mm mineral wool. Fall protection mounted in the upstand by default. Size from 1000 x 1000 to 2400 x 1200 mm. The control unit contains battery as power back up source in case of power failure, accessories for comfort ventilation, such as wind and rain sensors are available. Intrusion Grids, flashings and separate indication for open ventilator available as accessory. The fire ventilators are certified according to EN 12101-2 and fulfills the requirements of SS 883006.

Svita Sky Vent System consist of fire ventilator, control unit, sensors and button for manual operation. Fire ventilator Sky Vent is equipped with an electro-mechanical opening device powered with 48 V DC which guarantees a large opening force and allows the system to handle large snow loads. Sky Vent fire ventilator is upward opening and equipped with a dome of 2,3 or 4 layers of acrylic, clear or opal. The lid opening angle exceeds 140 degrees. Upstand height 250 or 500 mm in the standard version, height up to 1000 mm is possible, the upstand is insulated with 50mm mineral wool. Fall protection mounted in the upstand by default. Size from 1000 x 1000 to 2400 x 1200 mm. The control unit contains battery as power back up source in case of power failure, accessories for comfort ventilation, such as wind and rain sensors are available. Intrusion Grids, flashings and separate indication for open ventilator available as accessory. The fire ventilators are certified according to EN 12101-2 and fulfills the requirements of SS 883006.

Svita Sky Vent System consist of fire ventilator, control unit, sensors and button for manual operation. Fire ventilator Sky Vent is equipped with an electro-mechanical opening device powered with 48 V DC which guarantees a large opening force and allows the system to handle large snow loads. Sky Vent fire ventilator is upward opening and equipped with a dome of 2,3 or 4 layers of acrylic, clear or opal. The lid opening angle exceeds 140 degrees. Upstand height 250 or 500 mm in the standard version, height up to 1000 mm is possible, the upstand is insulated with 50mm mineral wool. Fall protection mounted in the upstand by default. Size from 1000 x 1000 to 2400 x 1200 mm. The control unit contains battery as power back up source in case of power failure, accessories for comfort ventilation, such as wind and rain sensors are available. Intrusion Grids, flashings and separate indication for open ventilator available as accessory. The fire ventilators are certified according to EN 12101-2 and fulfills the requirements of SS 883006.

Svita Sky Vent System consist of fire ventilator, control unit, sensors and button for manual operation. Fire ventilator Sky Vent is equipped with an electro-mechanical opening device powered with 48 V DC which guarantees a large opening force and allows the system to handle large snow loads. Sky Vent fire ventilator is upward opening and equipped with a dome of 2,3 or 4 layers of acrylic, clear or opal. The lid opening angle exceeds 140 degrees. Upstand height 250 or 500 mm in the standard version, height up to 1000 mm is possible, the upstand is insulated with 50mm mineral wool. Fall protection mounted in the upstand by default. Size from 1000 x 1000 to 2400 x 1200 mm. The control unit contains battery as power back up source in case of power failure, accessories for comfort ventilation, such as wind and rain sensors are available. Intrusion Grids, flashings and separate indication for open ventilator available as accessory. The fire ventilators are certified according to EN 12101-2 and fulfills the requirements of SS 883006.

Svita Smoke Vent System consist of fire ventilator, control unit, sensors and button for manual operation. Fire ventilator Sky Vent is equipped with an electro-mechanical opening device powered with 48 V DC which guarantees a large opening force and allows the system to handle large snow loads. Smoke Vent fire ventilator is upward opening and equipped with a insulated steel sheet lid. The lid opening angle exceeds 140 degrees. Upstand height 250 or 500 mm in the standard version, height up to 1000 mm is possible, the upstand is insulated with 50mm mineral wool. Fall protection mounted in the upstand by default. Size from 1000 x 1000 to 2400 x 1200 mm. The control unit contains battery as power back up source in case of power failure, accessories for comfort ventilation, such as wind and rain sensors are available. Intrusion Grids, flashings and separate indication for open ventilator available as accessory. The fire ventilators are certified according to EN 12101-2 and fulfills the requirements of SS 883006.

Svita Smoke Vent System consist of fire ventilator, control unit, sensors and button for manual operation. Fire ventilator Sky Vent is equipped with an electro-mechanical opening device powered with 48 V DC which guarantees a large opening force and allows the system to handle large snow loads. Smoke Vent fire ventilator is upward opening and equipped with a insulated steel sheet lid. The lid opening angle exceeds 140 degrees. Upstand height 250 or 500 mm in the standard version, height up to 1000 mm is possible, the upstand is insulated with 50mm mineral wool. Fall protection mounted in the upstand by default. Size from 1000 x 1000 to 2400 x 1200 mm. The control unit contains battery as power back up source in case of power failure, accessories for comfort ventilation, such as wind and rain sensors are available. Intrusion Grids, flashings and separate indication for open ventilator available as accessory. The fire ventilators are certified according to EN 12101-2 and fulfills the requirements of SS 883006.

Svita Smoke Vent System consist of fire ventilator, control unit, sensors and button for manual operation. Fire ventilator Sky Vent is equipped with an electro-mechanical opening device powered with 48 V DC which guarantees a large opening force and allows the system to handle large snow loads. Smoke Vent fire ventilator is upward opening and equipped with a insulated steel sheet lid. The lid opening angle exceeds 140 degrees. Upstand height 250 or 500 mm in the standard version, height up to 1000 mm is possible, the upstand is insulated with 50mm mineral wool. Fall protection mounted in the upstand by default. Size from 1000 x 1000 to 2400 x 1200 mm. The control unit contains battery as power back up source in case of power failure, accessories for comfort ventilation, such as wind and rain sensors are available. Intrusion Grids, flashings and separate indication for open ventilator available as accessory. The fire ventilators are certified according to EN 12101-2 and fulfills the requirements of SS 883006.

Svita Smoke Vent System consist of fire ventilator, control unit, sensors and button for manual operation. Fire ventilator Sky Vent is equipped with an electro-mechanical opening device powered with 48 V DC which guarantees a large opening force and allows the system to handle large snow loads. Smoke Vent fire ventilator is upward opening and equipped with a insulated steel sheet lid. The lid opening angle exceeds 140 degrees. Upstand height 250 or 500 mm in the standard version, height up to 1000 mm is possible, the upstand is insulated with 50mm mineral wool. Fall protection mounted in the upstand by default. Size from 1000 x 1000 to 2400 x 1200 mm. The control unit contains battery as power back up source in case of power failure, accessories for comfort ventilation, such as wind and rain sensors are available. Intrusion Grids, flashings and separate indication for open ventilator available as accessory. The fire ventilators are certified according to EN 12101-2 and fulfills the requirements of SS 883006.

Svita Smoke Vent System consist of fire ventilator, control unit, sensors and button for manual operation. Fire ventilator Sky Vent is equipped with an electro-mechanical opening device powered with 48 V DC which guarantees a large opening force and allows the system to handle large snow loads. Smoke Vent fire ventilator is upward opening and equipped with a insulated steel sheet lid. The lid opening angle exceeds 140 degrees. Upstand height 250 or 500 mm in the standard version, height up to 1000 mm is possible, the upstand is insulated with 50mm mineral wool. Fall protection mounted in the upstand by default. Size from 1000 x 1000 to 2400 x 1200 mm. The control unit contains battery as power back up source in case of power failure, accessories for comfort ventilation, such as wind and rain sensors are available. Intrusion Grids, flashings and separate indication for open ventilator available as accessory. The fire ventilators are certified according to EN 12101-2 and fulfills the requirements of SS 883006.

Roster 097 20x20x10cm

Roster 097a 20x20x10cm

Roster 097b 20x20x10cm

[LIST] Highly thermally insulated sliding and lift-and-slide system Uw values of < 1.3 W/(m²K), depending on the design Excellent drainage system with watertightness up to 1,050 Pa Sliding and lift-and-slide systems with optimised thermal insulation Vent weight up to 300 kg, available for up to 400 kg special design High-quality fi ttings components for easy operation High degree of transparency due to large vent sizes of up to 9 m², depending on the design [/LIST]

[LIST] Thermally insulated sliding and lift-and-slide system Thermal insulation in accordance with DIN EN ISO 10077, Part 1, Uw values of 1.9 W/(m²K), and a unit size of 2,500 mm x 2,500 mm, double glazing with a Ug value of 1.1 W/(m²K) Vent sizes: maximum width 3,000 mm maximum height 3,000 mm Vent weight up to 400 kg Watertightness up to class 9A in accordance with DIN EN 12208 Burglar resistance up to class RC 2 (WK2) Wide choice due to single, double and triple track outer frames [/LIST]

[LIST] The Schüco standard façade systems FW 50+ and FW 60+ are tried and tested solutions,which have proven themselves time and again Transom and mullion profiles are available in graduated dimensions to meet varying structural requirements FW 50+.SI (FW 60+.SI) certified by Passivhaus Institut Darmstadt, Germany Identical inner gasket sight lines on transoms and mullions Three drainage levels: the FW 50+ and FW 60+ systems are designed in such a way that the glass rebates of the mullions and transoms lie in different planes System-based security to WK2 (RC 2) / WK3 (RC 3) / FB4 The insert units offer new design options and efficient ventilation for large opening sections. Windows from the AWS series and Doors from the ADS series are compatible with façade systems Projected top-hung and parallel-opening window for vent weights up to a maximum of 250 kg Particularly large insert unit dimensions up to maximum 2700 mm wide and 3600 mm high [/LIST]

[LIST] Highly thermally insulated sliding system Thermal insulation: from Uf = 1.1 W/m²K Face widths from just 30 mm in the centre section and a concealed outer frame provide maximum transparency and light penetration Fast, quiet and convenient opening and closing at the touch of a button or optionally via manual operation Innovative track solution for large vent weight of up to 500 kg Security class RC 2 (WK2) Wide range of designs with double or triple track outer frames, 90° cornerand electric or manual opening [/LIST]

[LIST] Thermally insulated sliding systems with a high degree of flexibility Uw values of ≤ 1.8 W/(m²K), depending on the design Vent size: maximum width 2,500 mm, maximum height 2,600 mm Vent weight up to 230 kg Watertightness up to class 8A in accordance with DIN EN 12208 Burglar resistance up to RC 2 (WK2)" [/LIST]

[LIST] Folding sliding system Highly thermally insulated construction with Uw-values of < 1.3 W/(m²K) Narrow face widths from 112 mm (standard fold), basic depth of 80 mm and glass thicknesses of up to 57 mm Flat, thermally insulated threshold allows easy access Centre gasket integrated in the outer frame, three drainage levels in the vent as well as glazing rebate insulation Units can be folded to the right, left, inwards or outwards as required Burglar resistance up to class RC 2 (WK2) Schüco AWS 70 BS.HI window vent can be integrated as a turn / tilt window into the folding vent [/LIST]

Thermally insulated aluminium façade system with concealed opening units [LIST] Slimline profiles with the same look for vents and fixed fields Similar to a mullion/transom construction with an internal and external face width of 60 mm Uf value to 1.5 W/(m²K) including screw factor with 50 mm glass Merging of the vent and load-bearing structure: no additional insert outer frame required Vent and outer frame flush-fitted with minimal shadow gap Turn/tilt window possible Can be used for classic, floor-to-ceiling ribbon windows including safety barrier and punched opening [/LIST]

Tilt / slide window doors as the flexible solution for large openings [LIST] Ideally combines the advantages of sliding doors and turn / tilt windows – especially where vents need to be in the tilt position for ventilation Large, heavy vents are also easy and smooth to operate Design Visual symmetry of windows and sliding units Panoramic formats up to 2800 mm width are possible Optimised meeting stile locking Integrated vent engagement mechanism on the frames means operation is one-handed Excellent weathertightness to class 9A (DIN EN 12208) Security [/LIST]

Inward opening, highly thermally insulated aluminium window system [LIST] Thermal insulation to passive house standard with a Uf value of 1.0 W/(m²K) with a face width of 117 mm Uw value 0.80 W/(m²K) with Ug = 0.6 W/(m²K) and plastic spacer Realization of passive houce certification with specific profile combination Concealed Schüco AvanTec system fitting up to 250 kg Vent profiles for Schüco TipTronic with vent weights up to 160 kg Burglar resistance up to WK3 ( RC3) in accordance with DIN V ENV 1627 [/LIST]

Inward opening composite window system [LIST] Outstanding, scalable thermal insulation due to innovative insulation concept with a U, value from 0,85 W/(m²k) Increased sound reduction due to double centre gasket level and multi-pane principle up to Rw 53 dB Improved reduction of condensation due to controlled ventilation of the space between the panes Integrated Schüco CCB solar shading, concealed installation Reduced heat transfer due to installation of the Schüco composite Venetian blind with no thermal bridging Concealed blind guidance, no light penetration from the side Tool-free clip installation of the ready-to-use Schüco composite Venetian blind Simplified electrical interface due to pre-assembled plugs (Plug and Play) Outer vent with structural glazing look also available [/LIST]

Convectors Narbonne VT are composed of several interconnected profiled steel heating elements of a rectangular cross section. Each convector has got two bottom connecting openings, each with external thread G ½”, enabling bottom connection. Three side openings with internal thread G ½” are normally designed for mounting the Danfoss thermostatic valve insert with pre-regulation, plus the air vent and closing plug. Narbonne VT convectors are equipped with two side covers and the top masking grille. The heating profiles are mounted horizontally, so that to retain the 2 mm-wide distancing between each two, necessary to compensate for the heat expansion of the elements, and enabling the perfect varnish cover of the entire convector’s surface. Most models are equipped with convective elements, increasing the heating efficiency of the convectors.

Convectors Narbonne V VT are composed of several interconnected profiled steel heating elements of a rectangular cross section. Each convector has got two bottom connecting openings, each with external thread G ½”, enabling bottom connection. Four side openings with internal thread G ½” are normally designed for mounting the Danfoss thermostatic valve insert with pre-regulation, plus the air vent and closing plugs. Narbonne V VT convectors are equipped with two side covers, but no top masking grille. The heating profiles are mounted vertically, so that to retain the 2 mm-wide distancing between each two, necessary to compensate for the heat expansion of the elements, and enabling the perfect varnish cover of the entire convector’s surface. Most models are equipped with convective elements, increasing the heating efficiency of the convectors.

Purmo’s Delta Laserline Ventil column radiators are manufactured in the same types and sizes, and support the same features as the Delta Laserline radiators. The basic difference is that – in contrast to the Delta Laserline radiators – Delta Laserline Ventils are factory equipped with the valve insert with initial preset. The radiators are to be connected to the hydronic domestic heating system from the bottom, with two connecting stubs with internal diameter G .” and 50 mm spacing (not applicable to the radiators connected via the edge segments). As standard, opposite the valve insert the welded-on cover is positioned, with internal thread G .”, for the comfortable G .” air vent mounting, and below – the same cover also with G .” internal thread, for closing plug mounting.