-
Lockers 16
GRAPHISOFT SE | 1343649851Lockers for locker room.
-
Cupboard 16
GRAPHISOFT SE | 1343649851Cupboard with optional glazing for kitchen, living room or bedroom.
-
Water Dispenser.
gunawan MSJR | 1383356198 -
Шведская стенка 001
Mansur Mamirov | 1515092538Heiht 2000 Width 800 Depth 450
-
Room Name and Size Label 19
Jakub Chruscinski | 1536544066Improved Room Name and Dimension Label tool. Includes millimeters (mm), meters (m) and inches.
-
Cupboard 17
GRAPHISOFT SE | 1371557723Cupboard with optional glazing for kitchen, living room or bedroom.
-
VicciGrid
Victor Baboi | 1536453969An object to help in the placement of lights in a room.
-
Lockers 17
GRAPHISOFT SE | 1371557723Lockers for locker room.
-
Room Name Tag
Jakub Chruscinski | 1413960473BETA v2 - added ability to change dimension tag accuracy (number of decimal places)
-
High Performance 40mm Wet Room - Interior
|The Wet Room door is an example of Swedoors possibilities to provide solutions for special purposes. The Wet Room door is a water resistant composite-based high-performance (HP) door. Normally it's used in places with heavy water load in g. public baths, shower-rooms, proffessional kitchens, butcheries, etc.
-
A1200 - Lift System, Overhead, Patient Room
|An overhead rail system specifically designed for patient lifting and movement for a single bed patient room. The system will consist of recessed or ceiling mounted primary and secondary rails, lift motor with rolling carriage, patient harness or seat, and a hand controller or control box with charger. System will facilitate lifting and movement of patient to and from bed to gurney, chair or other requirement. Minimum lift capability is 550 pounds. Custom design of track layout by manufacturer is essential to meet individual facility requirements.
-
A1205 - Lift System, Overhead, Patient Room w/Bath
|An overhead rail system specifically designed for patient lifting and movement for a single bed patient room including the bathroom. The system will consist of recessed or ceiling mounted primary and secondary rails, lift motor with rolling carriage, patient harness or seat, and a hand controller or control box with charger. System will facilitate lifting and movement of patient to and from bed to gurney, chair, bath, commode, or other requirement. Minimum lift capability is 550 pounds. Custom design of track layout by manufacturer is essential to meet individual facility requirements.
-
A5045 - Hair Dryer, Wall-Mounted, Patient Room
|A wall mounted hair dyer with 2 speed and 2 heat settings for use in a bathroom of a patient room. The dyer will be 1500 watts minimum and plug into a nearby outlet in close proximity to the room sink and mirror. The dryer will have an automatic shut-off when returned to the holder. The motor will be smooth and quite in operation.
-
M8960 - Cart, Surgical Case, Birthing Room
|Surgical case cart for use in birthing rooms. Unit has two cabinet sections, each section equipped with two pull-up shelves with stops. The entire unit is mounted on four heavy duty swivel casters. Used to transport surgical packs and supplies to the birthing room, and soiled items back to central supply.
-
M8965 - Cart, Fetal Monitoring, Birthing Room
|Physiological monitoring cart for use in birthing rooms. Multiple section mobile cabinet for storing monitoring equipment and bedside supplies. Includes one deep drawer and an enclosed cabinet area in addition to the monitor storage area which is equipped with a door. Monitor shelf location is waist high and includes a pull out writing surface. Cart may include CPU storage shelf.
-
Elderly Care Room Entrance Door Solution
|The ASSA ABLOY Belgium solution for interior security entrance doors for elderly care homes equipped with SMARTair™ wireless door components and a free swing Cam-Motion® Door Closer. The SMARTair™ system is an online/offline proximity solution based on Mifare or i-Class radio frequency identification protocols. This system is managed on a PC running software.The free swing Door Closer is inactive for daily use and is activated only on fire detection. [LIST] Latch-Lock (antifriction), D6, by Litto, Standard : EN 12209, BENOR ATG RF30/60 Door Closer (free swing), Cam-Motion®, by ASSA ABLOY, Standard : EN 1154, EN 1155, DDA/CEN PR 15894, EN 15804 (EPD-ASA-20130275-IBC1-EN) Door Stop, Architectural Hardware, by Litto Hinges, Architectural Hardware, by Litto, Standard : EN 1935 Escutcheon (handles and integrated card reader), SMARTair™, by Litto, EN 15804 (EPD-ASA-20150162-IBA1-EN) [/LIST] Typical markets: elderly care, healthcare, nursery schools and kindergartens. For more information, please contact us: http://www.assaabloy.be/en/local/be/specification-and-bim/the-solutions-team-specification/
-
Wind, room divider A
|“These room dividers are a concept more than individual products. They can be seen as a celebration of the beauty of nature — a forest of organic shapes that also control acoustics like a kind of tuner, and that make the environment more pleasant and friendly. My inspiration always comes from nature. There are no more perfect shapes than those of a snowflake, a bee hide or a leaf. I think that it will be very nice to have these room dividers as reminders of nature’s beauty in a hospital or a large office landscape, for example. They also make it possible to speak in private even in acoustically chaotic environments.” — Jin Kuramoto
-
Wind, room divider B
|“These room dividers are a concept more than individual products. They can be seen as a celebration of the beauty of nature — a forest of organic shapes that also control acoustics like a kind of tuner, and that make the environment more pleasant and friendly. My inspiration always comes from nature. There are no more perfect shapes than those of a snowflake, a bee hide or a leaf. I think that it will be very nice to have these room dividers as reminders of nature’s beauty in a hospital or a large office landscape, for example. They also make it possible to speak in private even in acoustically chaotic environments.” — Jin Kuramoto
-
Wind, room divider C
|“These room dividers are a concept more than individual products. They can be seen as a celebration of the beauty of nature — a forest of organic shapes that also control acoustics like a kind of tuner, and that make the environment more pleasant and friendly. My inspiration always comes from nature. There are no more perfect shapes than those of a snowflake, a bee hide or a leaf. I think that it will be very nice to have these room dividers as reminders of nature’s beauty in a hospital or a large office landscape, for example. They also make it possible to speak in private even in acoustically chaotic environments.” — Jin Kuramoto
-
Wind, room divider D
|“These room dividers are a concept more than individual products. They can be seen as a celebration of the beauty of nature — a forest of organic shapes that also control acoustics like a kind of tuner, and that make the environment more pleasant and friendly. My inspiration always comes from nature. There are no more perfect shapes than those of a snowflake, a bee hide or a leaf. I think that it will be very nice to have these room dividers as reminders of nature’s beauty in a hospital or a large office landscape, for example. They also make it possible to speak in private even in acoustically chaotic environments.” — Jin Kuramoto
-
Wind, room divider E
|“These room dividers are a concept more than individual products. They can be seen as a celebration of the beauty of nature — a forest of organic shapes that also control acoustics like a kind of tuner, and that make the environment more pleasant and friendly. My inspiration always comes from nature. There are no more perfect shapes than those of a snowflake, a bee hide or a leaf. I think that it will be very nice to have these room dividers as reminders of nature’s beauty in a hospital or a large office landscape, for example. They also make it possible to speak in private even in acoustically chaotic environments.” — Jin Kuramoto
-
Besam ASSA ABLOY SL500 Clean Room - overhead concealed
|Automatic doors provide a useful function in clean room environments, increasing productivity and improving safety of transporting delicate and expensive equipment. The Besam ASSA ABLOY SL500 Clean Room sliding door package separates work process areas and provides convenience, reliability and protection for new construction or existing environments. Disclaimer: This product is available from ASSA ABLOY Entrance Systems - North America. Consult a local representative in your Region to discuss availability.
-
Besam ASSA ABLOY SL500 Clean Room - surface mount
|Automatic doors provide a useful function in clean room environments, increasing productivity and improving safety of transporting delicate and expensive equipment. The Besam ASSA ABLOY SL500 Clean Room sliding door package separates work process areas and provides convenience, reliability and protection for new construction or existing environments. Disclaimer: This product is available from ASSA ABLOY Entrance Systems - North America. Consult a local representative in your Region to discuss availability.
-
ASSA ABLOY HS9030GAT high speed clean room door
|The ASSA ABLOY HS9030GAT from ASSA ABLOY Entrance Systems is a compact, airtight door with integrated motor suitable for cleanroom environments. The door offers perfect sealing thanks to a unique design. The ASSA ABLOY HS9030GAT requires very little space, and it is the most space-efficient high speed door available in the market.
-
Room Thermostat RF ICS.2 Black
|LK Floor Heating is the perfect choice for new builds and renovation. We offer complete solutions for outdoor rooms, single rooms and renovation requiring a low installation height. We have developed and refined our underfloor heating system to make it even more comfortable, safe and economical with minimum environmental impact, as well as easy to install.
-
Room Thermostat S1 24V NO
|LK Floor Heating is the perfect choice for new builds and renovation. We offer complete solutions for outdoor rooms, single rooms and renovation requiring a low installation height. We have developed and refined our underfloor heating system to make it even more comfortable, safe and economical with minimum environmental impact, as well as easy to install.
-
Room Thermostat S1 EXT 24V NO
|LK Floor Heating is the perfect choice for new builds and renovation. We offer complete solutions for outdoor rooms, single rooms and renovation requiring a low installation height. We have developed and refined our underfloor heating system to make it even more comfortable, safe and economical with minimum environmental impact, as well as easy to install.
-
Room Thermostat S1 Dti 24V NO
|LK Floor Heating is the perfect choice for new builds and renovation. We offer complete solutions for outdoor rooms, single rooms and renovation requiring a low installation height. We have developed and refined our underfloor heating system to make it even more comfortable, safe and economical with minimum environmental impact, as well as easy to install.
-
Room Thermostat S2, 24V NO
|LK Floor Heating is the perfect choice for new builds and renovation. We offer complete solutions for outdoor rooms, single rooms and renovation requiring a low installation height. We have developed and refined our underfloor heating system to make it even more comfortable, safe and economical with minimum environmental impact, as well as easy to install.
-
Room Thermostat S2 EXT, 24v NO
|LK Floor Heating is the perfect choice for new builds and renovation. We offer complete solutions for outdoor rooms, single rooms and renovation requiring a low installation height. We have developed and refined our underfloor heating system to make it even more comfortable, safe and economical with minimum environmental impact, as well as easy to install.
-
Room Thermostat RF ICS.2 Silver
|LK Floor Heating is the perfect choice for new builds and renovation. We offer complete solutions for outdoor rooms, single rooms and renovation requiring a low installation height. We have developed and refined our underfloor heating system to make it even more comfortable, safe and economical with minimum environmental impact, as well as easy to install.
-
Room Thermostat RF ICS.2 White
|LK Floor Heating is the perfect choice for new builds and renovation. We offer complete solutions for outdoor rooms, single rooms and renovation requiring a low installation height. We have developed and refined our underfloor heating system to make it even more comfortable, safe and economical with minimum environmental impact, as well as easy to install.
-
Room Thermostat W ICS.2 White
|LK Floor Heating is the perfect choice for new builds and renovation. We offer complete solutions for outdoor rooms, single rooms and renovation requiring a low installation height. We have developed and refined our underfloor heating system to make it even more comfortable, safe and economical with minimum environmental impact, as well as easy to install.
-
Room Thermostat W ICS.2 Black
|LK Floor Heating is the perfect choice for new builds and renovation. We offer complete solutions for outdoor rooms, single rooms and renovation requiring a low installation height. We have developed and refined our underfloor heating system to make it even more comfortable, safe and economical with minimum environmental impact, as well as easy to install.
-
Room Thermostat W ICS.2 Silver
|LK Floor Heating is the perfect choice for new builds and renovation. We offer complete solutions for outdoor rooms, single rooms and renovation requiring a low installation height. We have developed and refined our underfloor heating system to make it even more comfortable, safe and economical with minimum environmental impact, as well as easy to install.
-
Karin divider slats
roger keller | 1389386020a slat and opening divider
-
Lockers 18
Eduardo Chichava | 1459957185Lockers for locker room.
-
Horizontal Sliding Wall System HSW R
|[LIST] Horizontal sliding wall with single-point stainless steel fixings Ideal for Shopfront, Shopfront with thermal insulation requirements, internal room partition The HSW-GP is characterised by the use of MANET single-point fixings in combination with a standard track rail. The system’s high-quality stainless steel components and flush-mounted single-point fixings perfectly match the demands of modern architecture. Different parking layouts available Glass types Toughened safety glass 8 mm to 24 mm, Toughened laminated safety glass 12 mm to 28mm. Insulating glass on request Max. system height 3000 mm Max. panel width 1100 mm. Max. panel weight 120 kg (depends on type of panel) Panel types Bedstop end panel, Single action sliding panel, Sliding panel [/LIST]
-
Metawell® Radiant Island
|Ceiling sails hang from the base ceiling as single panels, or are combined into islands. In this way they can take on any contours, edge configurations and surface coatings. The radiant ceiling sail, a functional component of building technology, becomes a custom design element. Compared to enclosed ceilings, the open structure of ceiling sails offers clear advantages: greater specific performance, better accessibility, simpler assembly and lower investment costs. Metawell® radiant islands made of aluminium sandwich panels improve the room acoustics without reducing the cooling and heating efficiency of building structure core-tempered ceilings. Moreover, performance deficiencies can be compensated specifically. Additionally the product has an EPD (Environmental Product Declaration).
-
Lindner Linear Metal Baffle Ceiling
|Baffle Ceilings create unique room atmospheres. These open ceiling constructions impress both with outstanding acoustics and the impressive possibilities of room layout. The free space between the baffles is optimally suitable for the integration of luminaires, sprinkler, ventilation systems or similar. Baffle Ceilings are also suitable for belated installations to correct acoustical problems with concrete ceilings and to create a distinctive design.
-
Lindner Post Cap Ceilings
|These well-directed ceiling constructions with Post Cap profiles can be adapted to every building shape and offer versatile scope for design. All avenues of ceiling design are open thanks to freely selectable distances of Post Cap profiles and our range of diverse ceilings with Post Caps and Cross Noggins. A special visual variant are radially installed Post Caps combined with trapezoidal metal ceiling panels. Post Cap ceilings allow you to install partition walls to the Post Cap profiles. Thus, you can flexibly change your room layout.
-
Glass pony wall
|Glass pony wall Total dimensions: 48" H x 10" W x 96" L Must be anchored to floor Approx. footprint: 10" x 96" Glass panel dimensions: 91" W x 44" H Ideal for room divider or reception desk back feature Poured Glass has 3D appearance (3) edges polished (two sides and top) Millwork included (Paint Grade) Unit painted to match C3 colors standard One tube of clear silicone included to caulk glass into millwork Three-week lead time; Four-week lead time for Glass
-
FLEX Glassline
|FLEX GLASSLINE are glass walls that provide a tasteful and inspiring work environment where it is easy to concentrate and get work in peace. Glass walls reduce noise and interference. The glazed walls bounding office and conference room without sacrificing transparency, light and community. FLEX GLASSLINE is a wall system with fixed and movable glass panels that can be combined with swing and sliding doors in wood or glass. Our glazed walls have no profiles in the vertical joints between the glass sheets.
-
Scandinavia 373
|Scandinavia is a wonderful and relaxing seat, thanks to its extra soft padding. The cushions can be turned over and the upholstery is removable, even from the frame. The design is simple, natural and timeless.Scandinavia fits many kinds of interior design styles. The sofa is available with high, soundabsorbing sides to create its own space within a room. Perfect for relaxing, small meetings or phone calls.
-
Electra Armchair
|Electra is a series of design furniture that, thanks to its attractive design, fits perfectly in every public environment, e.g. lobby or the waiting room. The sofas has high comfort and gives warmth to the rest of the room. Options:Electra is available as: armchair, 2-seat sofa and 3-seat sofa. Also available in the Electra series is a coffee table. Steel details in chrome or silver.
-
Vardags Sideboard
|A sideboard produced to complete the Vardags dining room group, but thanks to its stylish design Vardags can also be combined with other furniture. Vardags has many details that place high demands on furniture making craftsmanship. Solid door panels, drawer fronts and drawer sides further strengthen this impression of quality. The drawers are adjustable and self-closing, with anti trapping device. The shelves are moveable. All drawer fronts and drawer sides, door panels and shelves are made from solid birch. The doors are lockable. Design: Carl Malmsten.
-
T-stand with sound absorber low and metal shelf Modern
|Freestanding shelving is available in single-sided and double-sided versions. L-stand set against the wall and T-stands can be freely positioned in the room. These stands can be delivered with sound absorbers in the start and secondary section. Two cassette plates capsules absorbers and binds together the stands. Is intended for shelves with 800-width. Please try with metal shelf Modern. Choose the color combination of the panels and powder coated colors from our catalog.
-
OPPO 050
|Oppo is a swivel easy-chair that inhabits a room even when no one is there. The soft shape invites you to communicate without words. Oppo comes in a small and a large version, with or without armrests. Oppo thrives almost everywhere; airports, waiting areas, hotels, lounges, libraries and many other locations. After years of experimenting with the thin seat shells in laminated Formfelt, in 2009 Stefan Borselius gave shape to a new piece of furniture that seems totally skinless. An “alien” called Oppo. Oppo is slang and means friend or “buddy”.
-
RBM Noor 6070
|RBM Noor is a contemporary classic that marks a new beginning in vitalising spaces and relations. A collection of canteen and conference chairs adding vitality to working spaces and sociable places. Meet a wide range of colourful chairs easily combinable with every purpose, room or environment. A collection with a Scandinavian identity and environmental thinking. A result of an innovative design collaboration between the designers.
-
Oxford Easy Chair
|Oxford is a genuine piece of wooden furniture where the designer wants to present the structure itself through sophisticated and clear details. Oxford has a marked perspective that also makes it exciting to look at. But perhaps it’s just its sitting comfort that will make you fall in love with it. The cushioned, upholstered seats are available in any of our standard fabrics or in any material that you send us. The material is removable on both the seat and back cushions. Supreme sitting comfort is achieved by the classic basic construction combined with comfortable seat and back cushions fi lled with down. The seat cushion also has a core of highly elastic cold foam to further increase the comfort. Oxford is beautiful to look at from all directions, which makes it perfect for creating a group of seats in the middle of a room. Design: Mattias Ljunggren.
-
RBM Noor 6050
|RBM Noor is a contemporary classic that marks a new beginning in vitalising spaces and relations. A collection of canteen and conference chairs adding vitality to working spaces and sociable places. Meet a wide range of colourful chairs easily combinable with every purpose, room or environment. A collection with a Scandinavian identity and environmental thinking. A result of an innovative design collaboration between the designers.
-
Bits Wall
|Thanks to the sound-absorbing Bits Wall, the wall surface can be used to improve the acoustics in a room. The triangular design not only makes for a playful, attractive look, it also stops sound waves effectively, thereby improving the room’s acoustics. Each module comprises sound-absorbing polyester fibre upholstered with woollen fabric. Thanks to concealed metal brackets, the product can be mounted horizontally or vertically and combined to create different pattern. formations.
-
In Between Table (SK3)
|The In Between chair was the first chair to be added to the &tradition stable of furniture and Kallio has reinterpreted certain aspects of the chair in the creation of the table. The curvature of the circular table is for example reminiscent of the negative space in the form of the chair’s backrest. Similarly the angles of the legs of the table reflect the angles of the chair legs. The table legs were created using woodturning, a traditional technique that uses a lathe to shape wood. For &tradition a connection to the past is an essential component for any item in the collection. Although some of the manufacturing processes are traditional, the table still comes disassembled as a flat-pack, addressing ease of transport in a modern world. Furthermore, the shape of the table has been chosen to address issues within modern interiors. Its round shape means it must be brought away from walls, therefore taking an active role in any room. The circular form of the table also means that interaction when sat at the table is a more intimate and egalitarian affair. Product type: - Dining tables Materials: - Solid oak Colours: - White oiled oak. Smoked oiled oak. Black stained oak (RAL 9005). Production: - The In Between table is built from solid oak and treated with either lacquer or oil.
-
On Point
|On Point table is designed by Mattias Stenberg, the designer behind the successful stool Carry On. With its soft and elegance appearance the table is great for meeting between people but can also be used, with plants and greenery, for seperate private conversations. On Point is a part of Offecct’s O2asis concept and its different center modules makes it possible to fit different sizes of plants into the table. The table is also available with power source which makes it perfect for all public places where electronic devices are used. “The On Point table is a further development of the ideas that originated from the Carry On stool. The series is based on the idea of the informal meeting in a workplace or a public space, for example an airport. With their very obvious handles, the stool provoke mobility and spontaneous meetings. The table is designed to allow full contact between up to eight people around it, while it’s also perfect for more private and intimate gatherings among a few individuals. It is part of Offecct’s O2asis-concept, with vegetation integrated into furniture pieces in order to improve wellbeing and air quality. The table can hold plants and trees of different dimensions, with rings of two sizes placed in the table’s centre. It’s also a way of creating a micro architecture in the room, with the tree’s natural ceiling that makes us feel pleasantly enwrapped and comforted.” /Mattias Stenberg
-
Bergen
|The chair Bergen is designed by Hallgeir Homstvedt. Bergen was originally developed for a project to a university in Bergen, Norway. After further development the chair is now launched in our collection with its inspiring expression. In a certain light you can, by reading the shadow, imagine where Homstvedt found his inspiration - the beautiful windows of the university. “I designed this chair for the competition which I won for the furnishing of the newly renovated auditorium in the Bergen University, originally built in 1894. The imposing window valves in the room were important as inspiration. The shapes are reflected in the square back and the circular seat. The chair’s character lies in the meeting between these two surfaces, giving the impression of floating in the air, with only a small concealed point of attachment. This gives the chair a minimalistic and slender character, with good stacking capacity. The brief for the competition stated that the auditorium must hold four hundred seated audience members, but that it can quickly and swiftly be refurnished for a dinner for a hundred people.” / Hallgeir Homstvedt
-
Membrane
|Membrane is a acoustic room divider designed by David Trubridge. The room divider consits of smaller acoustic panels which together creates a modular system with two inspiring finished patterns. Membrane filter sound at the same time as it’s letting through light and create a unique expression. “This dividing screen, which filters sound, was commissioned exclusively by Offecct for their ambitious acoustic control line. It can be used to semi-divide spaces and can also be placed against a wall in order to dampen sound. Of course in addition to its strong acoustic control function, it also has a decorative element and can be assembled in various shapes and patterns. An interesting architectonic quality is added in that it is easy to light, creating layers of shadows. My inspiration, as usual, is nature, from where I draw most of my patterns. I love to go out on hikes and sleep under a tree for a few days, and it’s nice to bring a bit of the forest in to the indoor environment. Membrane is made from polyester fiber produced from recycled water bottles. We conduct a great deal of life circle research of our own and this material is actually environmentally smarter than natural wool, for example, as the sourcing of wool is very polluting.” /David Trubridge.
-
On Point High
|<p>“On Point is designed to allow full contact between up to eight people around it, while it’s also perfect for more private and intimate gatherings among a few individuals It’s also a way of creating a micro architecture in the room, with the tree’s natural ceiling that makes us feel pleasantly enwrapped and comforted”, says Mattias Stenberg.</p><p>On Point High, has an upholstered frame with a table top in white-pigmented oak. The center module in the middle of the table top is in lacquered MDF. It is available in different dimensions and makes it possible to fit different sizes of plants into the table. The tables heights make it possible to choose between standing or sitting on a bar stool.</p><p><strong>Benefits & functions</strong><br>- Can be upholstered in fabric or leath<br>- Can be equipped with a powerbox.<br>- It fits up to eight people.<br>- The center module is available in three different spaces, see images below<span></span></p>
-
Move On High
|<p>“Move On high and low, are two discreet, mobile stools that do not obstruct the room, and works good at a bar or other similar informal meeting places, as well as with On Point”, says Mattias Stenberg.</p><p><br>The bar stool is upholstered with legs in white-pigmented ash. The seat frame is made in recyclable aluminium, according to Offecct Lifecircle.</p><p><strong>Benefits & functions</strong><br>- Easy to assemble and disassemble the seat frame.<br>- Can be upholstered in fabric or leather.&nbsp;<br>- Is available in two different heights, 600 mm and 800 mm.<br><br>The foot ring and seat underframe is available i black, silver or white lacquer alternative in Offecct Flexicolor.&nbsp;</p>
-
High Performance 87mm Sound Rw47dB - Interior
|This is a high performance (HP) interior sound door, built for professional demands. A wood-based, rebated construction with a reinforced kernel that reduce sound in an extremly good way. Equipped with strong hinges and locks for cylinders. The construction reduces sound as much as 47dB and is therefore suitable for interrogation rooms or for example between a machine room and an office.
-
Type 100 Series - Operable Partition
|Hufcor Type 100 Moveable Wall is available in a single point or double point configuration and can offer an acoustic sound rating performance of up to 57 dB, laboratory tested to latest European standards. Choice of panel face finish is endless including melamine, laminate, and lacquered wood veneers and vinyl’s. Additional features can include acoustic sound absorption boards, magnetic display boards, dry wipe marker, pin boards and display rails. Aluminum framing profiles protect the facing boards for durability and long partition life. Alternatively, the panels can be constructed with concealed trims in order to achieve a ‘plain faced’ wall appearance. The aluminum frames and tracks may be powder-coated or color-anodized to coordinate with panel faces, ceiling grids etc. Single point panels are an ideal solution because they set up or stack using just a single length of track across a room. Panels can then be moved quickly, quietly and effortlessly to a stacking position at one or both sides of the room. ESS models have all the features and benefits of Type 100 range with the added benefit of electrically operated panel seals. Suitable for a wide variety of applications including: hotels and conference centers, corporate offices, hospitals, schools, colleges and universities, churches and religious establishments and sports and leisure facilities.
-
A1107 - Rail System , Utility, Gas and Electric
|The headwall rail system shall consist of three horizontal rails mounted to the patient room headwall to provide utilities and patient services to support ancillary equipment to include gas and vacuum. The rail system must be capable of quickly adding or relocating medical gases services and be able to accept new equipment, provide physical support to equipment, brackets, shelves and other patient support items.
-
A1120 - Column, Service, Prefab, Surgical, Ceiling Mounted
|Prefabricated surgical service column. Strong 18 gauge stainless steel shell ceiling mounted unit with the following services: oxygen, nitrous oxide, nitrogen, medical air, medical vacuum, gas evacuation, electrical outlets, monitoring connectors, and IV holders. Specify type of column (fixed or retractable) and number of outlets required for each service. Size will vary with number of service outlets required. Designed to be used in the operating room, recovery and ICU-CCU rooms.
-
A4015 - Clock, Elapsed Time, Electric
|Elapsed time digital electric clock. Single display time that can be used either as a clock or elapsed time indicator. Clock consists of buttons to set minutes, and hours for the time. For use in operating and delivery room, and medical service columns. Analog or digital displays may be provided as specified by the user.
-
A4995 - Table, Diaper Changing, Wall Mounted
|Wall mounted diaper changing table for use in public restrooms. Unit is a fold down system that folds upward when not in use for minimal intrusion into the room. Changing surface is contoured and has safety belt to insure that an infant will not fall from the table. Table is designed to hold no less than 250 pounds static weight. Closed dimensions are approximately 21" H x 36" W x 5" D. Open dimensions vary according to style. One system's open dimensions are 15 " high, 32" wide and 19" deep.
-
A5109 - Grab Bar, 1-1/4&#34; Dia., SS, 2 Wall, W/C Accessible
|A 1-1/4" diameter, satin finish stainless steel, peened gripping surface, 2 wall toilet stall/ room, grab bar with concealed mounting flanges. Snap over flanges are provided to conceal mounting screws. A selection of mounting kits and concealed anchor devices are available from the manufacturers for different types of installations. Grab bar shall comply with barrier-free accessibility guidelines for structural strength. For typical water closet applications in toilet stalls and rooms where ADA (American's With Disabilities Act) requirements must be met.
-
G1026 - Exercise Apparatus, Weight Training, Multi-Station
|Multi-station weight training apparatus for physical development and rehabilitation. Unit features a variety of benches, pull bars, supports and seats grouped around a central frame containing one or more weight stacks. Each station is designed to exercise specific muscle groups. A person can perform an extensive weight training routine by moving around the apparatus from station to station. More than one person can use the apparatus simultaneously by training at different stations. The number and types of exercises available depend on the specific model of equipment chosen. Greater system weight capacities for high level athletic competition training are available on some models. The room ceiling may have to be raised to accommodate this equipment. The database specifications refer to a higher end system with a large number of training stations and a standard weight set.
-
L2310 - Cabinet, Bio Safety, Class
|Bio safety cabinet, Class II, Type A1. This is a vertical freestanding unit with a face velocity of 100 fpm, constructed of type 304 stainless steel. The inside walls have a high velocity air return. The unit utilizes 70% air recirculation 30% exhaust either into room or through to the outside. It requires HEPA and includes a removable work tray, built-in drain valve, two valve penetrations with blanking plugs, duplex outlet and a fluorescent lamp. Used for low to moderate risk biological agents with the absence of volatile toxic chemicals and radionuclides. 4 foot model, other sizes available.
-
L3430 - Microtome, Rotary, Tilt, Refrigerated
|Refrigerated rotary microtome/cryostat. The unit's features include horizontal advancement, sectioning from 2-20 microns, combination unit consisting of an automatic defrost of chamber and microtome, a temperature range from -30 degrees centigrade to room temperature, and a defrost cycle of 10 minutes every 24 hours. Used to prepare samples for slide studies.
-
M0041 - Booth, Audio, Double Wall, Suite
|Double wall audiometric testing suite with double walled examination and control rooms. Unit includes recessed incandescent lights, carpet, keyed locks on both outer doors, a twelve outlet surface mounted plug mold strip in both rooms. A 24"x30" viewing window and self contained ventilation system permit extended examinations. Unit also includes jack panel between the exam and control rooms. Height may require raising room ceiling.
-
M0400 - Screen, Projection
|Wall or ceiling mounted, roll-up type screen with remote control. Includes multiple controls to operate the screen from two or more locations, wireless remote control, adjustable preset limit switches, and black borders on all sides. Screen is housed in a solid wood or metal case with removable motor module. For a classroom, conference room, or large auditorium.
-
M0800 - Warmer, Bassinet, Mobile, Neonatal
|A mobile warmer/bassinet consisting of a radiant warmer with proportional controller and an integral bassinet/procedure table. Also includes a warm weigh scale and phototherapy capabilities. All four sides of the bassinet fold out of the way for access to the infant. Bassinet bed can be tilted. Bassinet cabinet has storage drawers. Unit has shelving above bassinet to accommodate monitoring and resuscitation equipment. The entire unit is mounted on conductive casters, two with locking brakes. Designed for use in the neonatal intensive care unit, nursery, delivery room and special birthing units.
-
M4665 - Stretcher, Recovery, Surgical
|Recovery/surgical stretcher. Strong I-beam construction type unit. The height is adjustable with manual backrest and crank operated knee catch. Stainless or painted steel top and chassis. Features 8" or 10" conductive casters, with lock and brake, folding, tuck-away chrome side-rails and IV stand and a flame retardant antibacterial mattress. Designed for operating room transport or recovery applications.
-
M4811 - Pump, Intra-Aortic, Balloon
|Intra-aortic balloon pump. Item is used to treat cardiogenic shock resulting from extensive myocardial injury or damage. The pump shall function from line or battery power and is to be a mobile unit. It contains physiological monitoring, pacing, and pumping capabilities. It requires minimal set-up time and has immediate pumping capability. Adjustments can be accomplished without interruption of pumping. The monitor can be mounted remotely for the clinicians convenience and permits viewing of both cardio-pulmonary bypass and intra-aortic balloon pump simultaneously. The pump is designed for use in the critical care unit, operating room, cardiac cath lab and during transport.
-
M5016 - Desk, Refraction w/console, w/o Sink
|The ophthalmic refraction desk shall be specifically designed to conduct eye examinations in ophthalmic clinics and hospital. It shall have a control console consisting of three rechargeable instrument wells, two 110v auxiliary switches to control accessories, two low voltage switches to control fixation lights, a separate on/off dimmer control for room lights and an indirect ophthalmoscope control with hanger that provides power to the instrument when lifted. This item may include an optional equipment stand/pole with one to three arms and the ability to accept a phoropter arm. There shall be a swivel Lamp and a trial lens drawer.
-
M5562 - Tester, Visual Acuity, Video/Microprocessor Based
|Visual acuity tester using video (television monitor) and microprocessor technology. This equipment replaces the projector chart and projector in an eye examination lane. Wall bracing is required for mounting the unit directly to the wall without support from below. An optional floor stand can also be used. The unit requires an electrical outlet on the far end wall of the examination lane. This differs from standard eye examination room configurations which normally do not have electrical outlets in that wall. Other options include binocular vision and contrast sensitivity testing.
-
X1100 - Bin, Loading, Film
|Film loading bin, approximately 33" H x 23" W x 15" D. Double steel light trap door gives maximum protection and assures lifetime safety. All corners and seams are welded for strength and protection. The interior of the hinged bin is divided into five compartments, each capable of accepting 14" X 17" films. Adjustable inserts to accommodate smaller size films are provided. Also provided with a room light micro switch interlock. This unit is used in photo and X-ray darkrooms.
-
M7435 - Light, Overbed, Direct And Indirect
|Overbed patient room light which provides direct light for patient activity and indirect light for patient examination. The indirect portion of the light can be flipped down or redirected to provide dual intensity direct lighting. Unit is fully enclosed and is available in varying lengths. Some units feature a controlled power shut off to the light and patient bed when bumped by any item. Unit is designed to be wired directly to a junction box in the wall, a headwall service rail or patient service column. Dimensions are for a three foot light.
-
M9095 - Table, Operating, Remote Control
|Remote control surgical table. Table is a stainless steel pedestal type mounted on conductive locking casters. It consists of an Electro-hydraulic system with remote control and foot pedals. Unit's positioning capabilities include lateral tilt of 30 degrees, Trendelenburg and reverse Trendelenburg. It is equipped with side rails, kidney bridge and a radio translucent top. Table is designed for a variety of procedures in the operating room.
-
M9110 - Table, Operating, 5 or 6 Section, Trauma
|Pedestal type, 5 or 6 section, operating table. Pedestal table, mounted on a solid base with casters and locks. Table top surface is fabricated from radio-translucent and conductive panels and is equipped with cassette tunnels in each of the table top sections. Table includes: Electro-hydraulic controls, side rail locking system, grounding receptacle and dual arm support section. It is designed for use in the operating room in a variety of surgical procedures. Table is configured to address the needs of trauma surgery.
-
Ytong Austria
|Ytong AAC stands for more than 80 years for optimal thermal insulation and massive quality. Ytong offers a complete range of products for construction of single-family homes, townhouses, multi-storey and industrial buildings. The Ytong construction system with its perfectly matched individual components guarantees rapid construction progress and high efficiency for all types of wall: single skin and double-shell masonry, ETICS facades, and non-load bearing masonry. The benefits at a glance • Orientation towards the future: healthy living, ecology, sustainability and recycling • Technology: thermal insulation, fire protection, soundproofing and sustainability • Efficiency: cost-effectiveness and value retention With Ytong aerated concrete a building can be planned and executed as a unified whole from the basement to the roof. The product wall of Ytong cellular concrete includes, among other various stone formats, wall elements, lintels, U shells and matching accessories such as mortar and tools. For each application Ytong aerated concrete has the right solution with the highest quality masonry. Whether basement masonry, monolithic exterior or interior walls in the Ytong program you will always find the right product. In modernizing the area efficiently new room situations with Ytong aerated concrete can create masonry.
-
Ytong Belgium
|Ytong AAC stands for more than 80 years for optimal thermal insulation and massive quality. Ytong offers a complete range of products for construction of single-family homes, townhouses, multi-storey and industrial buildings. The Ytong construction system with its perfectly matched individual components guarantees rapid construction progress and high efficiency for all types of wall: single skin and double-shell masonry, ETICS facades, and non-load bearing masonry. The benefits at a glance • Orientation towards the future: healthy living, ecology, sustainability and recycling • Technology: thermal insulation, fire protection, soundproofing and sustainability • Efficiency: cost-effectiveness and value retention With Ytong aerated concrete a building can be planned and executed as a unified whole from the basement to the roof. The product wall of Ytong cellular concrete includes, among other various stone formats, wall elements, lintels, U shells and matching accessories such as mortar and tools. For each application Ytong aerated concrete has the right solution with the highest quality masonry. Whether basement masonry, monolithic exterior or interior walls in the Ytong program you will always find the right product. In modernizing the area efficiently new room situations with Ytong aerated concrete can create masonry.
-
Ytong Bosnia and Herzegovina
|Ytong AAC stands for more than 80 years for optimal thermal insulation and massive quality. Ytong offers a complete range of products for construction of single-family homes, townhouses, multi-storey and industrial buildings. The Ytong construction system with its perfectly matched individual components guarantees rapid construction progress and high efficiency for all types of wall: single skin and double-shell masonry, ETICS facades, and non-load bearing masonry. The benefits at a glance • Orientation towards the future: healthy living, ecology, sustainability and recycling • Technology: thermal insulation, fire protection, soundproofing and sustainability • Efficiency: cost-effectiveness and value retention With Ytong aerated concrete a building can be planned and executed as a unified whole from the basement to the roof. The product wall of Ytong cellular concrete includes, among other various stone formats, wall elements, lintels, U shells and matching accessories such as mortar and tools. For each application Ytong aerated concrete has the right solution with the highest quality masonry. Whether basement masonry, monolithic exterior or interior walls in the Ytong program you will always find the right product. In modernizing the area efficiently new room situations with Ytong aerated concrete can create masonry.
-
Ytong Bulgaria
|Ytong AAC stands for more than 80 years for optimal thermal insulation and massive quality. Ytong offers a complete range of products for construction of single-family homes, townhouses, multi-storey and industrial buildings. The Ytong construction system with its perfectly matched individual components guarantees rapid construction progress and high efficiency for all types of wall: single skin and double-shell masonry, ETICS facades, and non-load bearing masonry. The benefits at a glance • Orientation towards the future: healthy living, ecology, sustainability and recycling • Technology: thermal insulation, fire protection, soundproofing and sustainability • Efficiency: cost-effectiveness and value retention With Ytong aerated concrete a building can be planned and executed as a unified whole from the basement to the roof. The product wall of Ytong cellular concrete includes, among other various stone formats, wall elements, lintels, U shells and matching accessories such as mortar and tools. For each application Ytong aerated concrete has the right solution with the highest quality masonry. Whether basement masonry, monolithic exterior or interior walls in the Ytong program you will always find the right product. In modernizing the area efficiently new room situations with Ytong aerated concrete can create masonry.
-
Ytong Croatia
|Ytong AAC stands for more than 80 years for optimal thermal insulation and massive quality. Ytong offers a complete range of products for construction of single-family homes, townhouses, multi-storey and industrial buildings. The Ytong construction system with its perfectly matched individual components guarantees rapid construction progress and high efficiency for all types of wall: single skin and double-shell masonry, ETICS facades, and non-load bearing masonry. The benefits at a glance • Orientation towards the future: healthy living, ecology, sustainability and recycling • Technology: thermal insulation, fire protection, soundproofing and sustainability • Efficiency: cost-effectiveness and value retention With Ytong aerated concrete a building can be planned and executed as a unified whole from the basement to the roof. The product wall of Ytong cellular concrete includes, among other various stone formats, wall elements, lintels, U shells and matching accessories such as mortar and tools. For each application Ytong aerated concrete has the right solution with the highest quality masonry. Whether basement masonry, monolithic exterior or interior walls in the Ytong program you will always find the right product. In modernizing the area efficiently new room situations with Ytong aerated concrete can create masonry.
-
Ytong Czech Republic
|Ytong AAC stands for more than 80 years for optimal thermal insulation and massive quality. Ytong offers a complete range of products for construction of single-family homes, townhouses, multi-storey and industrial buildings. The Ytong construction system with its perfectly matched individual components guarantees rapid construction progress and high efficiency for all types of wall: single skin and double-shell masonry, ETICS facades, and non-load bearing masonry. The benefits at a glance • Orientation towards the future: healthy living, ecology, sustainability and recycling • Technology: thermal insulation, fire protection, soundproofing and sustainability • Efficiency: cost-effectiveness and value retention With Ytong aerated concrete a building can be planned and executed as a unified whole from the basement to the roof. The product wall of Ytong cellular concrete includes, among other various stone formats, wall elements, lintels, U shells and matching accessories such as mortar and tools. For each application Ytong aerated concrete has the right solution with the highest quality masonry. Whether basement masonry, monolithic exterior or interior walls in the Ytong program you will always find the right product. In modernizing the area efficiently new room situations with Ytong aerated concrete can create masonry.
-
Ytong Denmark
|Ytong AAC stands for more than 80 years for optimal thermal insulation and massive quality. Ytong offers a complete range of products for construction of single-family homes, townhouses, multi-storey and industrial buildings. The Ytong construction system with its perfectly matched individual components guarantees rapid construction progress and high efficiency for all types of wall: single skin and double-shell masonry, ETICS facades, and non-load bearing masonry. The benefits at a glance • Orientation towards the future: healthy living, ecology, sustainability and recycling • Technology: thermal insulation, fire protection, soundproofing and sustainability • Efficiency: cost-effectiveness and value retention With Ytong aerated concrete a building can be planned and executed as a unified whole from the basement to the roof. The product wall of Ytong cellular concrete includes, among other various stone formats, wall elements, lintels, U shells and matching accessories such as mortar and tools. For each application Ytong aerated concrete has the right solution with the highest quality masonry. Whether basement masonry, monolithic exterior or interior walls in the Ytong program you will always find the right product. In modernizing the area efficiently new room situations with Ytong aerated concrete can create masonry.
-
Ytong Finland
|Ytong AAC stands for more than 80 years for optimal thermal insulation and massive quality. Ytong offers a complete range of products for construction of single-family homes, townhouses, multi-storey and industrial buildings. The Ytong construction system with its perfectly matched individual components guarantees rapid construction progress and high efficiency for all types of wall: single skin and double-shell masonry, ETICS facades, and non-load bearing masonry. The benefits at a glance • Orientation towards the future: healthy living, ecology, sustainability and recycling • Technology: thermal insulation, fire protection, soundproofing and sustainability • Efficiency: cost-effectiveness and value retention With Ytong aerated concrete a building can be planned and executed as a unified whole from the basement to the roof. The product wall of Ytong cellular concrete includes, among other various stone formats, wall elements, lintels, U shells and matching accessories such as mortar and tools. For each application Ytong aerated concrete has the right solution with the highest quality masonry. Whether basement masonry, monolithic exterior or interior walls in the Ytong program you will always find the right product. In modernizing the area efficiently new room situations with Ytong aerated concrete can create masonry.
-
Ytong Germany
|Ytong AAC stands for more than 80 years for optimal thermal insulation and massive quality. Ytong offers a complete range of products for construction of single-family homes, townhouses, multi-storey and industrial buildings. The Ytong construction system with its perfectly matched individual components guarantees rapid construction progress and high efficiency for all types of wall: single skin and double-shell masonry, ETICS facades, and non-load bearing masonry. The benefits at a glance • Orientation towards the future: healthy living, ecology, sustainability and recycling • Technology: thermal insulation, fire protection, soundproofing and sustainability • Efficiency: cost-effectiveness and value retention With Ytong aerated concrete a building can be planned and executed as a unified whole from the basement to the roof. The product wall of Ytong cellular concrete includes, among other various stone formats, wall elements, lintels, U shells and matching accessories such as mortar and tools. For each application Ytong aerated concrete has the right solution with the highest quality masonry. Whether basement masonry, monolithic exterior or interior walls in the Ytong program you will always find the right product. In modernizing the area efficiently new room situations with Ytong aerated concrete can create masonry.
-
Ytong Kosovo
|Ytong AAC stands for more than 80 years for optimal thermal insulation and massive quality. Ytong offers a complete range of products for construction of single-family homes, townhouses, multi-storey and industrial buildings. The Ytong construction system with its perfectly matched individual components guarantees rapid construction progress and high efficiency for all types of wall: single skin and double-shell masonry, ETICS facades, and non-load bearing masonry. The benefits at a glance • Orientation towards the future: healthy living, ecology, sustainability and recycling • Technology: thermal insulation, fire protection, soundproofing and sustainability • Efficiency: cost-effectiveness and value retention With Ytong aerated concrete a building can be planned and executed as a unified whole from the basement to the roof. The product wall of Ytong cellular concrete includes, among other various stone formats, wall elements, lintels, U shells and matching accessories such as mortar and tools. For each application Ytong aerated concrete has the right solution with the highest quality masonry. Whether basement masonry, monolithic exterior or interior walls in the Ytong program you will always find the right product. In modernizing the area efficiently new room situations with Ytong aerated concrete can create masonry.
-
Ytong Netherlands
|Ytong AAC stands for more than 80 years for optimal thermal insulation and massive quality. Ytong offers a complete range of products for construction of single-family homes, townhouses, multi-storey and industrial buildings. The Ytong construction system with its perfectly matched individual components guarantees rapid construction progress and high efficiency for all types of wall: single skin and double-shell masonry, ETICS facades, and non-load bearing masonry. The benefits at a glance • Orientation towards the future: healthy living, ecology, sustainability and recycling • Technology: thermal insulation, fire protection, soundproofing and sustainability • Efficiency: cost-effectiveness and value retention With Ytong aerated concrete a building can be planned and executed as a unified whole from the basement to the roof. The product wall of Ytong cellular concrete includes, among other various stone formats, wall elements, lintels, U shells and matching accessories such as mortar and tools. For each application Ytong aerated concrete has the right solution with the highest quality masonry. Whether basement masonry, monolithic exterior or interior walls in the Ytong program you will always find the right product. In modernizing the area efficiently new room situations with Ytong aerated concrete can create masonry.
-
Ytong Norway
|Ytong AAC stands for more than 80 years for optimal thermal insulation and massive quality. Ytong offers a complete range of products for construction of single-family homes, townhouses, multi-storey and industrial buildings. The Ytong construction system with its perfectly matched individual components guarantees rapid construction progress and high efficiency for all types of wall: single skin and double-shell masonry, ETICS facades, and non-load bearing masonry. The benefits at a glance • Orientation towards the future: healthy living, ecology, sustainability and recycling • Technology: thermal insulation, fire protection, soundproofing and sustainability • Efficiency: cost-effectiveness and value retention With Ytong aerated concrete a building can be planned and executed as a unified whole from the basement to the roof. The product wall of Ytong cellular concrete includes, among other various stone formats, wall elements, lintels, U shells and matching accessories such as mortar and tools. For each application Ytong aerated concrete has the right solution with the highest quality masonry. Whether basement masonry, monolithic exterior or interior walls in the Ytong program you will always find the right product. In modernizing the area efficiently new room situations with Ytong aerated concrete can create masonry.
-
Ytong Poland
|Ytong AAC stands for more than 80 years for optimal thermal insulation and massive quality. Ytong offers a complete range of products for construction of single-family homes, townhouses, multi-storey and industrial buildings. The Ytong construction system with its perfectly matched individual components guarantees rapid construction progress and high efficiency for all types of wall: single skin and double-shell masonry, ETICS facades, and non-load bearing masonry. The benefits at a glance • Orientation towards the future: healthy living, ecology, sustainability and recycling • Technology: thermal insulation, fire protection, soundproofing and sustainability • Efficiency: cost-effectiveness and value retention With Ytong aerated concrete a building can be planned and executed as a unified whole from the basement to the roof. The product wall of Ytong cellular concrete includes, among other various stone formats, wall elements, lintels, U shells and matching accessories such as mortar and tools. For each application Ytong aerated concrete has the right solution with the highest quality masonry. Whether basement masonry, monolithic exterior or interior walls in the Ytong program you will always find the right product. In modernizing the area efficiently new room situations with Ytong aerated concrete can create masonry.
-
Ytong Serbia
|Ytong AAC stands for more than 80 years for optimal thermal insulation and massive quality. Ytong offers a complete range of products for construction of single-family homes, townhouses, multi-storey and industrial buildings. The Ytong construction system with its perfectly matched individual components guarantees rapid construction progress and high efficiency for all types of wall: single skin and double-shell masonry, ETICS facades, and non-load bearing masonry. The benefits at a glance • Orientation towards the future: healthy living, ecology, sustainability and recycling • Technology: thermal insulation, fire protection, soundproofing and sustainability • Efficiency: cost-effectiveness and value retention With Ytong aerated concrete a building can be planned and executed as a unified whole from the basement to the roof. The product wall of Ytong cellular concrete includes, among other various stone formats, wall elements, lintels, U shells and matching accessories such as mortar and tools. For each application Ytong aerated concrete has the right solution with the highest quality masonry. Whether basement masonry, monolithic exterior or interior walls in the Ytong program you will always find the right product. In modernizing the area efficiently new room situations with Ytong aerated concrete can create masonry.
-
Ytong Slovakia
|Ytong AAC stands for more than 80 years for optimal thermal insulation and massive quality. Ytong offers a complete range of products for construction of single-family homes, townhouses, multi-storey and industrial buildings. The Ytong construction system with its perfectly matched individual components guarantees rapid construction progress and high efficiency for all types of wall: single skin and double-shell masonry, ETICS facades, and non-load bearing masonry. The benefits at a glance • Orientation towards the future: healthy living, ecology, sustainability and recycling • Technology: thermal insulation, fire protection, soundproofing and sustainability • Efficiency: cost-effectiveness and value retention With Ytong aerated concrete a building can be planned and executed as a unified whole from the basement to the roof. The product wall of Ytong cellular concrete includes, among other various stone formats, wall elements, lintels, U shells and matching accessories such as mortar and tools. For each application Ytong aerated concrete has the right solution with the highest quality masonry. Whether basement masonry, monolithic exterior or interior walls in the Ytong program you will always find the right product. In modernizing the area efficiently new room situations with Ytong aerated concrete can create masonry.
-
Ytong Slovenija
|Ytong AAC stands for more than 80 years for optimal thermal insulation and massive quality. Ytong offers a complete range of products for construction of single-family homes, townhouses, multi-storey and industrial buildings. The Ytong construction system with its perfectly matched individual components guarantees rapid construction progress and high efficiency for all types of wall: single skin and double-shell masonry, ETICS facades, and non-load bearing masonry. The benefits at a glance • Orientation towards the future: healthy living, ecology, sustainability and recycling • Technology: thermal insulation, fire protection, soundproofing and sustainability • Efficiency: cost-effectiveness and value retention With Ytong aerated concrete a building can be planned and executed as a unified whole from the basement to the roof. The product wall of Ytong cellular concrete includes, among other various stone formats, wall elements, lintels, U shells and matching accessories such as mortar and tools. For each application Ytong aerated concrete has the right solution with the highest quality masonry. Whether basement masonry, monolithic exterior or interior walls in the Ytong program you will always find the right product. In modernizing the area efficiently new room situations with Ytong aerated concrete can create masonry.
-
Ytong Spain
|This stone is white and consists of lime, sand, cement and water. Inside, it contains millions of air pores, which also gave him the name: aerated concrete. Over 70 years ago it was for the first time industrially produced in southern Sweden’s Yxhult in times of scarcity of raw materials and energy due to stricter laws. From the original name "Yxhults Anghärdade Gasbetong" a short time later became the first registered building materials brand in the world, which pushed the worldwide carrer of Ytong and changed the building construction sustainably. Since then, Ytong with the concise Y of its hometown and the significant yellow color, stands like no other brand for construction with optimal insulation. This material has become a standard element in residential building on an international level. Due to the extensive product range it is possible to build a house from the basement to the roof completely with aerated concrete elements. Ytong aerated concrete offers the right solution for every application with the highest quality masonry. Whether basement masonry, monolithic exterior or interior walls, you will always find the right product. In renovations new room situations can efficiently be created with Ytong aerated concrete masonry. Ytong, the classic building material, stands like no other for optimal thermal insulation and massive quality.
-
Ytong Sweden
|Ytong AAC stands for more than 80 years for optimal thermal insulation and massive quality. Ytong offers a complete range of products for construction of single-family homes, townhouses, multi-storey and industrial buildings. The Ytong construction system with its perfectly matched individual components guarantees rapid construction progress and high efficiency for all types of wall: single skin and double-shell masonry, ETICS facades, and non-load bearing masonry. The benefits at a glance • Orientation towards the future: healthy living, ecology, sustainability and recycling • Technology: thermal insulation, fire protection, soundproofing and sustainability • Efficiency: cost-effectiveness and value retention With Ytong aerated concrete a building can be planned and executed as a unified whole from the basement to the roof. The product wall of Ytong cellular concrete includes, among other various stone formats, wall elements, lintels, U shells and matching accessories such as mortar and tools. For each application Ytong aerated concrete has the right solution with the highest quality masonry. Whether basement masonry, monolithic exterior or interior walls in the Ytong program you will always find the right product. In modernizing the area efficiently new room situations with Ytong aerated concrete can create masonry.
-
Ytong Switzerland
|Ytong AAC stands for more than 80 years for optimal thermal insulation and massive quality. Ytong offers a complete range of products for construction of single-family homes, townhouses, multi-storey and industrial buildings. The Ytong construction system with its perfectly matched individual components guarantees rapid construction progress and high efficiency for all types of wall: single skin and double-shell masonry, ETICS facades, and non-load bearing masonry. The benefits at a glance • Orientation towards the future: healthy living, ecology, sustainability and recycling • Technology: thermal insulation, fire protection, soundproofing and sustainability • Efficiency: cost-effectiveness and value retention With Ytong aerated concrete a building can be planned and executed as a unified whole from the basement to the roof. The product wall of Ytong cellular concrete includes, among other various stone formats, wall elements, lintels, U shells and matching accessories such as mortar and tools. For each application Ytong aerated concrete has the right solution with the highest quality masonry. Whether basement masonry, monolithic exterior or interior walls in the Ytong program you will always find the right product. In modernizing the area efficiently new room situations with Ytong aerated concrete can create masonry.
-
Confair folding table
|The sophisticated folding technique of the folding table and the large lockable wheels, as well as the elegant design and high-quality materials, are equally responsible for the table’s success. The table’s structure makes it simple to use and transport. The look of the conference table reflects communication at a high level: from the conference and project-work room, to top-level executive offices. As options, cable channels, power supply connections and innovative techni-modules ensure interactive access to state-of-the-art multi-media equipment is so easy it has to be believed. The folding table is the perfect mix of well-used space, aesthetic appeal and advanced technical functions.
-
Solo™ Baffle
|Ecophon Solo Baffles are acoustic solutions, primarily when it is not possible to install wall-to-wall ceilings. Baffles are suitable in buildings where the volume should be maintained, the natural light is brought into the room from skylights or as an option when TABS (Thermally Activted Building System) is selected as cooling system. Different possibilities exist to suspend the baffles using Connect Baffle profile, Connect Adjustable wire hanger or Connect grid system. The systems consist of Ecophon Solo Baffle/anchor or Solo Baffle/hook and Ecophon Connect accessories with an approximate weight of 2-3 kg/m. The baffles are manufactured fromhigh density glass wool, with Akutex FT surface on both sides. The edges are straight cut and painted. Ecophon Solo Baffles are easily demountable systems.
-
Solo™ Circle
|Ecophon Solo Circle is an acoustic solution, primarily when it is not possible to install a wall-to-wall ceiling. Solo Circle is suitable in buildings where the room volume could be maintained or as an option when TABS (Thermally Activated Building System) is selected as cooling system. Solo Circle is an unframed free hanging unit offering a high degree of design possibilities both regarding colours and suspension systems. The three different suspension systems using Adjustable wire hangers, One-point fixing or Adjust brackets in combination with the engineered Connect Absorber anchor (patent) give opportunities to create several layers and angles. The Ecophon Solo Circle tile is available in size Ø1200x40 mm with a weight of 4,5 kg or Ø800x40 mm with a weight of 2kg. The panel is manufactured from high density glass wool, with Akutex™ FT surface on both sides. The edges are straight cut and painted.
-
Solo™ Circle XL
|Ecophon Solo Circle XL is an acoustic solution, primarily when it is not possible to install a wall-to-wall ceiling. Solo Circle XL is suitable in buildings where the room volume could be maintained or as an option when TABS (Thermally Activated Building System) is selected as cooling system. Solo Circle XL is an unframed free hanging unit. The unit is suspended with Adjustable wire hangers which are attached to Connect Main runners. This, in combination with, the engineered Connect Absorber anchor (patent) give opportunities to create several layers. The Solo Circle XL panel consists of two semicircles. The complete panel is available in size Ø1600x40 mm with a weight of 8 kg. The panel is manufactured from high density glass wool, with Akutex™ FT surface on both sides. The edges are straight cut and painted.
-
Solo™ Rectangle
|Ecophon Solo Rectangle is an acoustic solution, primarily when it is not possible to install a wall-to-wall ceiling. Solo Rectangle is suitable in buildings where the room volume could be maintained or as an option when TABS (Thermally Activated Building System) is selected as cooling system. Solo Rectangle is an unframed free hanging unit offering a high degree of design possibilities both regarding colours and suspension systems. The three different suspension systems using Adjustable wire hangers, One-point fixing or Adjust brackets in combination with the engineered Connect Absorber anchor (patent) give opportunities to create several layers and angles. The Solo Rectangle panel is available in size 2400x1200x40 mm with a weight of 11,5 kg. The panel is manufactured from high density glass wool, with Akutex™ FT surface on both sides. The edges are straight cut and painted.
-
Solo™ Square
|Ecophon Solo Square is an acoustic solution, primarily when it is not possible to install a wall-to-wall ceiling. Solo Square is suitable in buildings where the room volume could be maintained or as an option when TABS (Thermally Activated Building System) is selected as cooling system. Solo Square is an unframed free hanging unit offering a high degree of design possibilities both regarding colours and suspension systems. The three different suspension systems using Adjustable wire hangers, One-point fixing or Adjust brackets in combination with the engineered Connect Absorber anchor (patent) give opportunities to create several layers and angles. The Solo Square panel is available in size 1200x1200x40 mm with a weight of 6 kg. The panel is manufactured from high density glass wool, with Akutex™ FT surface on both sides. The edges are straight cut and painted.
-
21-Series Design
|21.1 is a single 21 pendant hung from a round canopy. The pendant is designed to hang either alone or with a clustering of 21.1 chandeliers. Solitary pendants can be used to highlight areas of a room, or in random groupings form an ambient chandelier. Inspired by the sporadic, perhaps discordant arrangement of barnacles on a rock surface, the 21 is fabricated from thin sheets of porcelain wrapped around frosted borosilicate glass trumpet-shaped diffusers. Each diffuser houses a low voltage (12V, 20W xenon) lamp. A strong contrast is established between the organically distributed soft light passing through the translucent white porcelain skin and the sharp, crisp light passing through the borosilicate glass diffuser.
-
Metal Baffle Ceiling wavelike design
|Thanks to the wavelike design of the baffle ceiling, three-dimensional structures are created in every room. Heights and radii of the baffles are variable and generate the picture of a wavy water surface in freely selectable shape and geometry. Moreover, various surface possibilities are available. The result: a manifold design of appearances of baffle ceilings. The design oriented baffle ceiling combined with the integration of durable LED lighting offers special room accents.
-
HÅG H09 Excellence 9320
|HÅG H09 Excellence is pure elegance. With its no-compromise design and upholstered in high-quality leather or smooth felted wool fabric on the back and seat, this chair is unbeatably comfortable. Something as rare as an easy-to-use luxury task chair that allows the body and mind to move freely. NEW: Now Available in fabric, Vadal Uni from GU. HÅG H09 Exellence is also available as an exclusive chair for the meeting room. To create more space around the table, the models can be delivered with standard armrests and a smaller footbase. HÅG H09 Excellence 9320 has a high back. The chair features HÅG’s BalancedMovementMechanism and adjustable seat height and seat depth. An adjustable lumbar cushion provides extra comfort and optimal support. Tilt resistance is adjustable and lockable. HÅG H09 is delivered with multi-functional TiltDown™ armrests in black leather as standard. The footbase/gas lift is available in matte black or polished aluminium. HÅG H09 Excellence 9320 is available with the seat and back in Antigo Soft leather or in exclusive Vadal Uni wool.
-
RBM Ballet 6030
|An inspiring chair in a classic design. Timeless and modern design that makes a stylish mark on all environments. The chair is stable comfortable. Works just as well around the dining table, meeting table or in the conference room. Easy to use, and may also be linked together. Moulded coloured plastic shell, with or without padding. Available in leather. Available with different bases and with or without armrests.
-
RBM Ballet 6030S
|An inspiring chair in a classic design. Timeless and modern design that makes a stylish mark on all environments. The chair is stable and comfortable. Works just as well around the dining table, meeting table or in the conference room. Easy to use, and may also be linked together. Moulded coloured plastic shell, with or without padding. Available in leather. Available with different bases and with or without armrests.
-
Soft S10
|SOFT S10, is a model of the sofas from the operational realm, light and timeless, which enables you to create independent or integrated spaces within the same room. An ergonomic cushion and a comfortable suspension system which makes it an efficient solution that produces an active comfort for its users for meeting, management and waiting areas, contract spaces as well as more informal work spaces.
-
Premium EASYMATIC Z8/L
|Premium Easymatic movable wall, parking position Z8/L – Perfect in form and function. The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 57 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate.
-
Premium CLASSIC Z8/L
|Premium Classic movable wall, parking position Z8/L - Perfect in form and function The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 59 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate. It is also possible to provide the walls with fire and smoke protection. The semiautomatic Nüsing EASYmatic® system offers you increased comfort and user-friendliness.
-
Premium EASYMATIC Z2/K
|Premium Easymatic movable wall, parking position Z2/K – Perfect in form and function. The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 57 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate.
-
Premium CLASSIC Z2/K
|Premium Classic movable wall, parking position Z2/K - Perfect in form and function The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 59 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate. It is also possible to provide the walls with fire and smoke protection. The semiautomatic Nüsing EASYmatic® system offers you increased comfort and user-friendliness.
-
Premium EASYMATIC Z3/K
|Premium Easymatic movable wall, parking position Z3/K – Perfect in form and function. The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 57 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate.
-
Premium CLASSIC Z3/K
|Premium Classic movable wall, parking position Z3/K - Perfect in form and function The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 59 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate. It is also possible to provide the walls with fire and smoke protection. The semiautomatic Nüsing EASYmatic® system offers you increased comfort and user-friendliness.
-
Premium EASYMATIC Z4/K
|Premium Easymatic movable wall, parking position Z4/K – Perfect in form and function. The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 57 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate.
-
Premium CLASSIC Z4/K
|Premium Classic movable wall, parking position Z4/K - Perfect in form and function The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 59 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate. It is also possible to provide the walls with fire and smoke protection. The semiautomatic Nüsing EASYmatic® system offers you increased comfort and user-friendliness.
-
Concept Ceiling
|Suspended ceilings are primarily used to regulate the acoustics in the room and reduce noise between rooms. In addition, they have an aesthetic function by hiding technical installations in the ceilings. The Concept ceiling panels are particularly appropriate where one wants a high degree of flexibility in connection with good noise reduction between rooms. The tiles are wet pressed mineral fiber plates with white painted acoustic fleece on the underside. The Concept ceiling consists of four plate varieties with different acoustic properties but with identical surface so that they can be exchanged in same premises.
-
Norden Star
|Norden Star chair is perfectly suitable for modern kitchen or dining room. It will aslo fit in as a standalone chair in a creative workplace. The seat is made of polypropylene and it is lined with soft foam, covered with artificial leather in the color of the backrest. Such a comfy seat leans on the stable construction of four beech legs, which guarantee solid support. The simple form provides the chair with a light and elegant look.
-
Sherwood
|If you are fascinated by fashionable furniture Sherwood certainly catches your eye. This table is completely hand made from organic materials. Solid, wooden top on the intriguing, raw steel legs makes a big impression. Mountain pine bark wrapped in natural contrasts perfectly with the modernist form of the base. Application This model fits in standard industrial facilities, modern apartments and idyllic interiors. Sherwood makes each room unique. Put it in the living room, dining room or kitchen and watch the delight in the sight of the household. Maybe you are looking for unconventional solutions to the conference room, restaurant, cafe? Sherwood is made of solid pine wood, hence the possibility of outbreaks of resin. It is a natural characteristic of this tree species. Table top can be produced in the colors: light pine, dark pine, oak.
-
Norden Cross
|Norden Cross chair is perfectly suitable for modern kitchen or dining room. It will aslo fit in as a standalone chair in a creative workplace. The seat is made of polypropylene and it is lined with soft foam, covered with artificial leather in the color of the backrest. Elegant wooden legs in oak’s color, provide the chair with a light and elegant look. It is avaiable in the following colors: black, grey, red, white,green, blue, yellow, violet.
-
Cavetto - storage
|The name Cavetto (kaschkasch, 2016) comes from the moulding on the edges of all Cavetto models – a shelf series that can be configured in endless variations. The ingenious thing about Cavetto is that the edges of the shelves are shaped so that back and side panels can be inserted between them without the need for any fittings. Cavetto can be placed against a wall, positioned as a room divider or used to build a room within a room. It can be accessed from one or two directions depending on how the shelves are filled with the different accessories. The shelf unit comes in four different heights and in widths of 900 mm and 350 mm. A width of 350 mm can be used as a choice of corner shelf. Cavetto is made of round solid wood legs with adjustable feet that are linked by blockboard shelves. Cavetto can then be filled with accessories, mid sides, outer sides, backs, a fully removable drawer and pair of doors (only for width 900 mm). Crates in two different heights can be placed above the shelf or stacked on top of each other. Choose from oak, ash, standard stains on ash and standard colors (only for accesseories). Cavetto is supplied partially assembled and can be fully assembled with simple tools.
-
Terasso - storage
|Terasso (Tony Almén Peter Gest, 2016) is a bookshelf inspired by transparency and airiness. The result is shelves that open up and let the light in which creates better surfaces for visual display. Everything from books to magazines and decorative objects can be arranged in various combinations to suit different needs and tastes. You can position Terasso centrally in a room as a room divider or against a wall. It comes in three different heights. Terasso has a frame made of solid wood with shelves made in veneered MDF with solid wood trims. Choose from oak, ash, standard stains on ash. Adjustable feet on the legs.
-
The Box Lounger
|The Box Lounger is a cozy box with a soft sound absorbing material on the inside that dampens outside sounds. It is the perfect place for you to make a phone call, work on your laptop or just relax. The Box Lounger can also be used as a room divider and is available in different colors to match your interior. The Box Lounger provides a quiet and visually secluded cover from the surrounding noise and movement. Generally this problem can be found in open-space offices and public spaces.
-
Flyingbar
|The new FLYINGBAR combines Indel B’s well-established Smart Technology with a next generation Italian design, by using the energy saving cooling system. It’s the new wall-mount glass door minibar, the thinnest in the world and thanks to its versatility it allows many installation solutions, which implies a better functionality of the appliance and far greater accessibility for any guest, also in case of impairment. Realized by the collaboration between Indel B and the Architect Massimo Mussapi (within the FLYIN GROOM project) who has re-defined the idea of the hotel room and flexibility, according to the principles of functionality and aesthetic quality, also by an innovative cutting-edge technology.
-
K40 Ecosmart G PV
|The line of K ECOSMART G minibars enables hoteliers to choose eco-friendly and ultra-quiet products of the last generation with an exclusive design. Thanks to the new compressors, which offer best performance, with cyclopentane insulation, cooling gas (R600), and the eutectic plate that keeps temperature constant at night (when compressor is OFF), K ECOSMART G products are part of the A+++ Energy Class with a consumption reduced by 79% compared to the leading absorption minibars on the market. The electronic timer: sets the working phases of the compressor. Minimum 6 hrs over 24 (the energy consumption are extremely low). The Smart System controls the turning on and off of the compressor based on the presence or absence of the guest in the room. The use of the Smart System requires the presence in the room of an Energy Saver device: a card-holder designed to save energy. To operate, the Smart System does not require any electronic timer or remote control. *** G: Global 50/60 Hz ***
-
K35 Ecosmart G
|The line of K ECOSMART G minibars enables hoteliers to choose eco-friendly and ultra-quiet products of the last generation with an exclusive design. Thanks to the new compressors, which offer best performance, with cyclopentane insulation, cooling gas (R600), and the eutectic plate that keeps temperature constant at night (when compressor is OFF), K ECOSMART G products are part of the A+++ Energy Class with a consumption reduced by 79% compared to the leading absorption minibars on the market. The electronic timer: sets the working phases of the compressor. Minimum 6 hrs over 24 (the energy consumption are extremely low). The Smart System controls the turning on and off of the compressor based on the presence or absence of the guest in the room. The use of the Smart System requires the presence in the room of an Energy Saver device: a card-holder designed to save energy. To operate, the Smart System does not require any electronic timer or remote control. *** G: Global 50/60 Hz ***
-
Grandee
|The expansive Grandee hot tub comfortably seats a party of seven, with room for everyone to enjoy state-of-the-art jets, a two-speed jet pump, and two seats with patented Moto-Massage DX jets. It also features advanced innovations like an insulating hinge seal, 100% no-bypass filtration for cleaner water and the soothing BellaFontana® fountain feature.
-
Akusto™ One SQ
|To increase the sound absorption in the room this system gives you the possibility to install Ecophon Akusto One SQ on the wall. The systems give design possibilities, working with different formats and colours to create various patterns. There are three fixings for Akusto One SQ, Connect™ One trim, Connect™ One hook fixing or Connect™ One fixing. Akusto One SQ is available in various sizes with a weight of 2,0-4,5 kg. The panel is manufactured from high density glass wool. The visible surface has a glass fibre fabric Texona in colours and is also available with a painted surface (Akutex™ FT). The back of the panel is covered with glass tissue. The edges are straight cut and painted in white or grey.
-
DECOCLEAN
|Weldable - Smooth - Clean room Wall - Wall protection Smooth protection panel for high infection risk areas • Smooth alternative to Decochoc panel • Suitable for high infection risk areas such as operating theter • Welded joints possible for perfect watertightness between panels or with vinyl flooring • Resists to standard cleaning, disinfection and antiseptic products (Anios and Bioquell test reports)
-
Golf chest
|One of a kind cabinet in modern style will be an original element and will add character not only to a living room, but also a hall, bedroom or bathroom. It is made from mdf board varnished to high gloss surface in black color complemented by stainless steel, polished frame. This piece is a perfect choice for those who love style and luxury. We can make it in size and color of your choice.
-
Scandia Nett - Swiwel
|In Norwegian ‘nett’ means ‘neat’ –and Scandia Nett is simply a neater version of Scandia Senior. Scandia Nett has an elegant, sleek appearance and pleasing shape, all together making the lounge chair suitable for any room or style–alone, as a pair or arranged in bigger groups. Despite having clear references to the mid-century design era, Scandia Nett stands out as a timeless piece. The simplicity that characterises the design exudes a modern aesthetic that makes Scandia Nett just as beautiful now as then. The gracefully curved lines still speak to the imagination. Thanks to the carefully thought-out angle of the back and the flexible slats, Scandia Nett offers great comfort. Its relatively neat size will also make it easy to move the chair to your new favourite view. Scandia Nett is available with the distinctive bolt base or the convenient swivel base.
-
Scandia Senior
|After succeeding in getting the first Scandia chair in production, Hans Brattrud returned to the drawing board to expand the technique into an easy chair. Scandia Junior was paired with a bigger version of itself: the Scandia Senior. The new chair proved to be a success, growing the range’s popularity outside of Norway and making it an outstanding representative of the golden era of Scandinavian Design at its best. As late as in 2006, Scandia Senior received “The Interior Innovation Award” in Cologne and was nominated for “The Design Award of the Federal Republic of Germany 2007”. Simplicity, minimalism and functionality are keywords for Scandia Senior. The easy chair features an eye-catching, sculptural silhouette and a sense of lightness that helps it adapt to any room without losing its distinctive character. The tall back and the adjustable leather headrest provide superb support for the upper body and neck, and Scandia Senior is therefore an ideal seat for relaxation. Scandia Senior is available with a swivel base, bolt base or the original tilt system for higher comfort.
-
Up Sofa
|The Up sofa system was designed by Knudsen, Berg and Hindenes for the talk show ‘Senkveld’ on Norwegian TV2. The idea was to design a modular sofa system with a pure simple shape. The solid construction is ideal for sitting on the backrest, and invites to informal sitting positions. The sofa system can be placed in the center of the room. The versatile module system can be easily adapted to different interiors with a wide range of upholstery options, and different bases. Dimensions: 1 seat w / back W: 74 cm H: 75 cm D: 85 cm SH: 43 cm 2 seats w / back W: 144 cm 3 seats w / back W: 214 cm 3 seats w / back curved W: 214 cm 1 seat wo/ back W: 74 cm D: 81 cm SH: 46 cm 2 seats wo/ back W: 144 cm 3 seats wo/ back W: 214 cm 3 seats curved W: 212 cm
-
Door Economy 50 - double leaf - inward opening
|Jansen-Economy 50 is the profile system for flush door constructions without thermal insulation. The simple profile shapes ease the task of assembly. The wide range offers room for creative and cost-effective solutions. Jansen-Economy 50 door: • Diverse applications • Particularly economical • Uninsulated
-
Door Economy 50 - double leaf - outward opening
|Jansen-Economy 50 is the profile system for flush door constructions without thermal insulation. The simple profile shapes ease the task of assembly. The wide range offers room for creative and cost-effective solutions. Jansen-Economy 50 door: • Diverse applications • Particularly economical • Uninsulated
-
Door Economy 50 - single leaf - inward opening
|Jansen-Economy 50 is the profile system for flush door constructions without thermal insulation. The simple profile shapes ease the task of assembly. The wide range offers room for creative and cost-effective solutions. Jansen-Economy 50 door: • Diverse applications • Particularly economical • Uninsulated
-
Door Economy 50 - single leaf - outward opening
|Jansen-Economy 50 is the profile system for flush door constructions without thermal insulation. The simple profile shapes ease the task of assembly. The wide range offers room for creative and cost-effective solutions. Jansen-Economy 50 door: • Diverse applications • Particularly economical • Uninsulated
-
Balance
|Round shapes add a timeless elegance to the design of this stunning dining or meeting table. The round or oval top is supported by a robust column, which creates more leg room under the table. The base of the balance is available in brushed aluminium or lacquered concrete. Balance is available as a fixed or extendable table. The wide choice of finishes allows you to determine the look of the top, the column and the base.
-
DYNACO M2 FREEZER
|Designed for cold storage applications the DYNACO M2 FREEZER roll up door allows fast traffic in and out your freezer room, minimizing temperature variations. Its excellent seal limits the loss of cooled air and saves energy. An optional insulation curtain mounted on the high speed freezer door reduces condensation and frost. It forms an extra barrier between warm outside temperatures and cold inside temperatures. Low consumption electric heating cables in the side posts of this high speed freezer door reduce frost and avoid down-time. Combined with the self-reinserting door curtain this guarantees a long lifetime of the roll up door. A DYNACO M2 FREEZER roll up door is safe for people, products and vehicles. The flexible door curtain is free of rigid parts. It avoids injuries and damage.
-
Siniat NIDA wall 75A50
|The interior walls are used to separate the individual rooms in the building and, depending on their functions, they meet stringent requirements in terms of statics, acoustics and fire protection. Partition walls are mostly made of drywall systems of profiles with different width dimensions: 50, 75 or 100 mm with a single or double layer of plasterboard or cement board. The materials used to make partition walls have important properties, such as acoustic insulation, fire insulation and moisture resistance; they also must be easy to install and remove to ensure the highest comfort of the room.
-
Siniat NIDA wall 100A75
|The interior walls are used to separate the individual rooms in the building and, depending on their functions, they meet stringent requirements in terms of statics, acoustics and fire protection. Partition walls are mostly made of drywall systems of profiles with different width dimensions: 50, 75 or 100 mm with a single or double layer of plasterboard or cement board. The materials used to make partition walls have important properties, such as acoustic insulation, fire insulation and moisture resistance; they also must be easy to install and remove to ensure the highest comfort of the room.
-
Siniat NIDA wall 125A100
|The interior walls are used to separate the individual rooms in the building and, depending on their functions, they meet stringent requirements in terms of statics, acoustics and fire protection. Partition walls are mostly made of drywall systems of profiles with different width dimensions: 50, 75 or 100 mm with a single or double layer of plasterboard or cement board. The materials used to make partition walls have important properties, such as acoustic insulation, fire insulation and moisture resistance; they also must be easy to install and remove to ensure the highest comfort of the room.
-
Siniat NIDA wall 100A50
|The interior walls are used to separate the individual rooms in the building and, depending on their functions, they meet stringent requirements in terms of statics, acoustics and fire protection. Partition walls are mostly made of drywall systems of profiles with different width dimensions: 50, 75 or 100 mm with a single or double layer of plasterboard or cement board. The materials used to make partition walls have important properties, such as acoustic insulation, fire insulation and moisture resistance; they also must be easy to install and remove to ensure the highest comfort of the room.
-
Siniat NIDA wall 125A75
|The interior walls are used to separate the individual rooms in the building and, depending on their functions, they meet stringent requirements in terms of statics, acoustics and fire protection. Partition walls are mostly made of drywall systems of profiles with different width dimensions: 50, 75 or 100 mm with a single or double layer of plasterboard or cement board. The materials used to make partition walls have important properties, such as acoustic insulation, fire insulation and moisture resistance; they also must be easy to install and remove to ensure the highest comfort of the room.
-
Siniat NIDA wall 150A100
|The interior walls are used to separate the individual rooms in the building and, depending on their functions, they meet stringent requirements in terms of statics, acoustics and fire protection. Partition walls are mostly made of drywall systems of profiles with different width dimensions: 50, 75 or 100 mm with a single or double layer of plasterboard or cement board. The materials used to make partition walls have important properties, such as acoustic insulation, fire insulation and moisture resistance; they also must be easy to install and remove to ensure the highest comfort of the room.
-
Siniat NIDA wall SW150
|The interior walls are used to separate the individual rooms in the building and, depending on their functions, they meet stringent requirements in terms of statics, acoustics and fire protection. Partition walls are mostly made of drywall systems of profiles with different width dimensions: 50, 75 or 100 mm with a single or double layer of plasterboard or cement board. The materials used to make partition walls have important properties, such as acoustic insulation, fire insulation and moisture resistance; they also must be easy to install and remove to ensure the highest comfort of the room.
-
Siniat NIDA wall SW175
|The interior walls are used to separate the individual rooms in the building and, depending on their functions, they meet stringent requirements in terms of statics, acoustics and fire protection. Partition walls are mostly made of drywall systems of profiles with different width dimensions: 50, 75 or 100 mm with a single or double layer of plasterboard or cement board. The materials used to make partition walls have important properties, such as acoustic insulation, fire insulation and moisture resistance; they also must be easy to install and remove to ensure the highest comfort of the room.
-
Siniat NIDA wall SW190
|The interior walls are used to separate the individual rooms in the building and, depending on their functions, they meet stringent requirements in terms of statics, acoustics and fire protection. Partition walls are mostly made of drywall systems of profiles with different width dimensions: 50, 75 or 100 mm with a single or double layer of plasterboard or cement board. The materials used to make partition walls have important properties, such as acoustic insulation, fire insulation and moisture resistance; they also must be easy to install and remove to ensure the highest comfort of the room.
-
Siniat NIDA wall 155B50
|The interior walls are used to separate the individual rooms in the building and, depending on their functions, they meet stringent requirements in terms of statics, acoustics and fire protection. Partition walls are mostly made of drywall systems of profiles with different width dimensions: 50, 75 or 100 mm with a single or double layer of plasterboard or cement board. The materials used to make partition walls have important properties, such as acoustic insulation, fire insulation and moisture resistance; they also must be easy to install and remove to ensure the highest comfort of the room.
-
Siniat NIDA wall 205B75
|The interior walls are used to separate the individual rooms in the building and, depending on their functions, they meet stringent requirements in terms of statics, acoustics and fire protection. Partition walls are mostly made of drywall systems of profiles with different width dimensions: 50, 75 or 100 mm with a single or double layer of plasterboard or cement board. The materials used to make partition walls have important properties, such as acoustic insulation, fire insulation and moisture resistance; they also must be easy to install and remove to ensure the highest comfort of the room.
-
Siniat NIDA wall 255B100
|The interior walls are used to separate the individual rooms in the building and, depending on their functions, they meet stringent requirements in terms of statics, acoustics and fire protection. Partition walls are mostly made of drywall systems of profiles with different width dimensions: 50, 75 or 100 mm with a single or double layer of plasterboard or cement board. The materials used to make partition walls have important properties, such as acoustic insulation, fire insulation and moisture resistance; they also must be easy to install and remove to ensure the highest comfort of the room.
-
Siniat NIDA wall 150C50
|The interior walls are used to separate the individual rooms in the building and, depending on their functions, they meet stringent requirements in terms of statics, acoustics and fire protection. Partition walls are mostly made of drywall systems of profiles with different width dimensions: 50, 75 or 100 mm with a single or double layer of plasterboard or cement board. The materials used to make partition walls have important properties, such as acoustic insulation, fire insulation and moisture resistance; they also must be easy to install and remove to ensure the highest comfort of the room.
-
Siniat NIDA wall 200C75
|The interior walls are used to separate the individual rooms in the building and, depending on their functions, they meet stringent requirements in terms of statics, acoustics and fire protection. Partition walls are mostly made of drywall systems of profiles with different width dimensions: 50, 75 or 100 mm with a single or double layer of plasterboard or cement board. The materials used to make partition walls have important properties, such as acoustic insulation, fire insulation and moisture resistance; they also must be easy to install and remove to ensure the highest comfort of the room.
-
Siniat NIDA wall 250C100
|The interior walls are used to separate the individual rooms in the building and, depending on their functions, they meet stringent requirements in terms of statics, acoustics and fire protection. Partition walls are mostly made of drywall systems of profiles with different width dimensions: 50, 75 or 100 mm with a single or double layer of plasterboard or cement board. The materials used to make partition walls have important properties, such as acoustic insulation, fire insulation and moisture resistance; they also must be easy to install and remove to ensure the highest comfort of the room.
-
Siniat NIDA SLA
|The interior walls are used to separate the individual rooms in the building and, depending on their functions, they meet stringent requirements in terms of statics, acoustics and fire protection. Partition walls are mostly made of drywall systems of profiles with different width dimensions: 50, 75 or 100 mm with a single or double layer of plasterboard or cement board. The materials used to make partition walls have important properties, such as acoustic insulation, fire insulation and moisture resistance; they also must be easy to install and remove to ensure the highest comfort of the room.
-
Siniat NIDA ceiling DK/WON/CD 60 - 12,5
|Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.
-
Siniat NIDA ceiling DK/WON/CD 60 - 18
|Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.
-
Siniat NIDA ceiling DK/WON/CD 60 - 25
|Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.
-
Siniat NIDA ceiling DK/WON/CD 60 - 30
|Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.
-
Siniat NIDA ceiling DK/WON/CD 60 - 60
|Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.
-
Siniat NIDA ceiling DK/MFC - 12,5
|Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.
-
Siniat NIDA ceiling DK/MFC - 18
|Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.
-
Siniat NIDA ceiling DK/MFC - 25
|Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.
-
Siniat NIDA ceiling DK/MFC - 30
|Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.
-
Siniat NIDA ceiling DK/MFC - 60
|Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling running above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation.
-
Siniat NIDA - solutions
|Plasterboards can be used to the construction of interior and exterior walls. They are of particular use in the repair of all types of buildings. The surface of the drywall is smooth and forms a perfect base for further finishing works. Plasterboards can be fixed to the wall with plasterboard adhesive or directly on the steel framework using steel partitions. By using plasterboard it is possible to increase the protection for fire resistance of the load-bearing walls of the building up to EI120 class. Building such constructions with an additional layer of mineral wool increases the acoustic and thermal insulation of the external walls. The interior walls are used to separate the individual rooms in the building and, depending on their functions, they meet stringent requirements in terms of statics, acoustics and fire protection. Partition walls are mostly made of drywall systems of profiles with different width dimensions: 50, 75 or 100 mm with a single or double layer of plasterboard or cement board. The materials used to make partition walls have important properties, such as acoustic insulation, fire insulation and moisture resistance; they also must be easy to install and remove to ensure the highest comfort of the room. Suspended ceilings function aesthetically, hiding installations or structural components of the ceiling above. They also create a fire resistant barrier and insulate the room acoustically and thermally. The sheathing of the ceiling construction is usually a 12.5 mm or 15 mm plasterboard. Special sound-absorbing ceilings use perforated plasterboards. The construction of a suspended ceiling grid consists of cold-formed sections installed in a single or double layered crossover. Suspended ceilings are hung on either rotary hangers with a spring and fixing rods or, in the case of fire protection ceilings, on nonius hangers or components for direct installation. A casing systems of risers is used to hide all kinds of installations in a building. Due to the possibility of smoke or fire spreading to other levels of the building, the risers must be adequately protected. For this purpose, systems based on 12.5 mm, 15 mm, 20 mm or 25 mm plasterboards are used. The plasterboards are fixed to the intermediate support structure or directly to the walls and ceiling. The casing systems of risers using plasterboards help protect against the spread of fire to the EI 120 fire resistance class. An additional feature of these systems is possible acoustic protection from sounds coming from inside the shaft, caused for example by air flow, sanitation system or vibration of the installation.
-
Dubbel Tvattbank & Elit
|With two Elite changing tables in combination with the washing bench, Tvättbänk Björk, one can minimize the risk of pressure injuries and simultaneously gain good workspace in the nursing room. Elite is an electric height-adjustable changing table with a working height between 57-110cm. The washing bench is equipped with 4 wire baskets, drainage components, and a mixer tap with pull-out shower. These tables are delivered with a phthalate-free mattress and high rims. To avoid lifting, Elite can be supplemented with the Klättra climb accessory
-
Fast 60
|Fast 60 has a construction consisting of a grey painted steel frame with room for many storage baskets. The table surface is coated with birch or white laminate. The changing table comes with a phthalate-free mattress and high rims. To avoid lifting, you can supplement with changing table steps without removing any baskets. The changing tavle is available in birch or white laminate.
-
Fast 80
|Fast 80 has a construction consisting of a grey painted steel frame with room for many storage baskets. The table surface is coated with birch or white laminate. The changing table comes with a phthalate-free mattress and high rims. To avoid lifting, you can supplement with changing table steps without removing any baskets. The changing tavle is available in birch or white laminate.
-
Fast 100
|Fast 100 has a construction consisting of a grey painted steel frame with room for many storage baskets. The table surface is coated with birch or white laminate. The changing table is equipped with a phthalate-free mattress and high rims. To avoid lifting, you can supplement with changing table steps without removing any baskets. The changing tavle is available in birch or white laminate.
-
Fast 120
|Fast 120 has a construction consisting of a grey painted steel frame with room for many storage baskets. The table surface is coated with birch or white laminate. The changing table is equipped with a phthalate-free mattress and high rims. To avoid lifting, you can supplement with changing table steps without removing any baskets
-
Fast 140
|Fast 140 has a construction consisting of a grey painted steel frame with room for many storage baskets. The table surface is coated with birch or white laminate. The changing table is equipped with a phthalate-free mattress and high rims. To avoid lifting, you can supplement with changing table steps without removing any baskets. The changing tavle is available in birch or white laminate.
-
Fast 180
|Fast 180 has a base consisting of a grey painted steel frame with room for many storage baskets. The table surface is coated with birch or white laminate. The changing table has two working areas on each side of a central washing area and comes with a phthalate-free mattress, high rims, a mixer tap with pull-out shower and drainage components. To avoid lifting, you can supplement with changing table steps without removing any baskets.
-
Fast 220
|Fast 220 has a base consisting of a grey painted steel frame with room for many storage baskets. The table surface is coated with birch or white laminate. The changing table has two working areas on each side of a central washing area and comes with a phthalate-free mattress, high rims, a mixer tap with pull-out shower and drainage components. To avoid lifting, you can supplement with changing table steps without removing any baskets.
-
Fast 100 H
|Fast 100h has a construction consisting of a grey painted steel frame with room for many storage baskets. The table surface is coated with birch or white laminate. Fast 100h has a washing area embedded to the right on the changing table surface and is supplied with a phthalate-free mattress, high rims, a mixer tap and drainage components. To avoid lifting, you can supplement with changing table steps without removing any baskets. The changing tavle is available in birch or white laminate.
-
Fast 100 V
|Fast 100v has a construction consisting of a grey painted steel frame with room for many storage baskets. The table surface is coated with birch or white laminate. Fast 100v has a washing area embedded to the left on the changing table surface and is supplied with a phthalate-free mattress, high rims, a mixer tap and drainage components. To avoid lifting, you can supplement with changing table steps without removing any baskets. The changing tavle is available in birch or white laminate.
-
Fast 120 H
|Fast 120h has a construction consisting of a grey painted steel frame with room for many storage baskets. The table surface is coated with birch or white laminate. Fast 120h has a washing area embedded to the right on the changing table surface and is supplied with a phthalate-free mattress, high rims, a mixer tap with pull-out shower and drainage components. To avoid lifting, you can supplement with changing table steps without removing any baskets. The changing tavle is available in birch or white laminate.
-
Fast 120 V
|Fast 120v has a construction consisting of a grey painted steel frame with room for many storage baskets. The table surface is coated with birch or white laminate. Fast 120v has a washing area embedded to the left on the changing table surface and is equipped with a phthalate-free mattress, high rims, a mixer tap with pull-out shower and drainage components. To avoid lifting, you can supplement with changing table steps without removing any baskets. The changing tavle is available in birch or white laminate.
-
Fast 140 H
|Fast 140h has a construction consisting of a grey painted steel frame with room for many storage baskets. The table surface is coated with birch or white laminate. Fast 140h has a washing area embedded to the right on the changing table surface and is supplied with a phthalate-free mattress, high rims, a mixer tap with pull-out shower and drainage components. To avoid lifting, you can supplement with changing table steps without removing any baskets. The changing tavle is available in birch or white laminate.
-
Fast 140V
|Fast 140V has a construction consisting of a grey painted steel frame with room for many storage baskets. The table surface is coated with birch or white laminate. Fast 140v has a washing area embedded to the left on the changing table surface and is equipped with a phthalate-free mattress, high rims, a mixer tap with pull-out shower and drainage components. To avoid lifting, you can supplement with changing table steps without removing any baskets The changing tavle is available in birch or white laminate.
-
HÅG SoFi mesh back
|The HÅG SoFi 7500 is a mesh chair that provides you with the ventilation benefits of a breathable, transparent backrest. HÅG in Balance® technology ensures more subconscious movement. Adjustable seat height and depth, and a unique fully functional lumbar support. The foot support provides a comfortable way to move and vary the position of your feet. The HÅG SoFi mesh comes with a coherent light grey or black visual look, with a matching mesh backrest and frame. The seat, lumbar support and headrest can be dressed up in a variety of colours from the HÅG Total Colour Standard and extended textile collections to satisfy individual preferences and achieve the desired style. Available with HÅG SlideBack™ armrests which allow you to move closer to your desk, invite you to sit sideways or use the armrests as elbow support. Available in black, silver or white aluminium. Headrest and polished aluminium available as optional extras. Castors can be ordered to suit the type of floor: hard castors for soft flooring and soft castors for hard floors. Also available as a meeting room chair.
-
HAWA-Concepta 40/50 pivot sliding system
|Hardware system for pivot sliding cabinet doors weighing up to 40 and 50 kg The HAWA-Concepta 40/50 slides doors alongside cabinet bodies or into wall recesses. Room-high designs and walk-in cabinets are easy and efficient to implement. The well-thought-out concept has omitted a bottom guide channel and offers optimum flexible room utilisation with no obstructions in the form of protruding doors. HAWA-Concepta 40/50 is a true master of design thanks to a broad band width of available dimensions, weights and material thicknesses.
-
Rockfon Blanka® dB 35
|[LIST] Rockfon Blanka dB 35 provides room to room sound insulation as well as good sound absorption complemented by a smooth, deep matt, super white surface. Rockfon Blanka dB 35 is made from 25mm stone wool with a high performance membrane on the back which reduces the transmission of noise from room to room. The enhanced surface durability makes it more resistant to dirt and everyday wear and tear, extending the product lifetime. [/LIST]
-
Rockfon Blanka® dB 40
|[LIST] Rockfon Blanka dB 40 provides enhanced room to room sound insulation as well as a high level of sound absorption complemented by a smooth, deep matt, super white surface. Rockfon Blanka dB 40 is made from 30mm stone wool with a high performance membrane on the back which reduces the transmission of noise from room to room. The enhanced surface durability makes it more resistant to dirt and everyday wear and tear, extending the product lifetime. [/LIST]
-
Rockfon Blanka® dB 42
|[LIST] Rockfon Blanka dB 42 provides enhanced room to room sound insulation as well as a high level of sound absorption in areas where confidentiality is important. Rockfon Blanka dB 42 is made from 40mm stone wool with a high performance membrane on the back. The surface is smooth, deep matt and super white. The enhanced surface durability makes it more resistant to dirt and everyday wear and tear, extending the product lifetime. [/LIST]
-
Rockfon Blanka® dB 44
|[LIST] Rockfon Blanka dB 44 provides outstanding room to room sound insulation as well as the highest level of sound absorption (Class A) in areas where privacy and acoustic comfort is important. Rockfon Blanka dB 44 is made from 50mm dual layer stone wool with a high performance membrane sandwich construction. The surface is smooth, deep matt and super white.The enhanced surface durability makes Rockfon Blanka dB 44 more resistant to dirt and everyday wear and tear, extending the product lifetime. [/LIST].
-
MAW 110
|MAW110 is a basic system of KOMANDOR mobile walls, having the highest sound insulation performance and fire resistance. The height of the mobile partition wall can be adapted to each room, which is only limited by the building structure itself. The sliding mobile wall is an innovative solution for temporary or permanent reorganization of the entire interior, depending on your current needs. Movable walls are ideal to division conference and training centers, office buildings, hotels, schools and public places where it is required, eg. to soundproof separate rooms for working in smaller groups, or when we need to use the full space. MAW110 is available in version: MAW110E (automated mobile partition walls), MAW110G (glazed partition walls - we can customize color and frame materials and glass color).
-
MAW 48
|KOMANDOR glass mobile wall is a product bringing an impression of lightness and elegance to the interior. They let in natural light and visually enlarge the room space. This is an option for those who insist on solutions not only functional, but elegant and endearing. If our choice is to divide the surface with a glass wall, it does not need to install it permanently. Much more preferred choice is a movable, sliding partition wall, allowing a complete removal of the room separation at any time. This flexibility can be useful for example in shopping malls exibition sites, where full access to its interior is needed for a period of time or in places where glass divisions gives spaciousness and its mobility allows you to quickly reorganize the interior.
-
TAW 110
|KOMANDOR partition walls are the ideal solution for the division of interiors in modern designs. Mounted on a permanent basis to the floor and ceiling of the room, they have excellent soundproofing performance and fire resistance through the use of appropriate filler materials. They have also the highest reliability, obtained from the result of many years of engineering experience. At the time, in which you need a reconfiguration of rooms, they do not require any building reconstruction or any demolition of standard plasterboard walls, becouse they are completely demountable. They allow easy wall removal and further installation in another location, which is a very important feature of any dynamic business. TAW110 basic partition wall system proves itself superbly eg. in public buildings where soundproofing allows work in silence. The wall structure strenght will also provide a secure barrier, and at the same time, the ability to move the wall if required. This flexibility may be an invaluable benefit in the future. TAW110 is available in version: TAW110G (glazed temporary partition walls), TAW110D (double-glass temporary partition walls - we can customize color and frame materials and glass color).
-
TAW 48
|KOMANDOR TAW48 system works great where a glass wall is required with a very robust construction but fully transparent, without visible stiles. Homogeneous glass sheet will gain spectacular visual effects of each store or exposition and at the same time, thanks to highly durable tempered glass, it will provide a solid barrier against the entry to the separated room. At the time, in which you need a reconfiguration of rooms, they do not require any building reconstruction or any demolition of standard plasterboard walls, because our partition walls are completely demountable. They are ideal to division any space. In the event that we need a wall mounted permanently in the long term, TAW48 glass partition walls is a response to the products high quality demands, but if you frequently require completely open access to the interior, we invite you to use the MAW48 mobile wall from our current offering.
-
Vario
|Our fantastic new table that easily moved aside to make room for other things. Equipped with folding top and height adjustable with gas lift, 73-115 cm. White lacquered steel tube with 2 lockable castors, RAL 9016. The record is 65x65 cm and covered with linoleum or laminate. Select plywood to get a better looking edge of the top is also a choice.
-
Individual Items - Presence detector
|Two operating modes in one device A compact device with a twin function: the new movement / presence detector for automatic switching of the lighting, dependent on brightness and movement. It is persuasive due to its excellent detection properties (360° detection range) at mounting heights up to six metres. The movement / presence detector has three independent PIR sensors for movement detection. Each of these sensors is assigned to an individually activated range (each with a detection angle of 120°). In addition the detection range can be considerably extended by grouping up to five devices. It is therefore possible to adapt the device to the room conditions or to the specific application. Due to the integrated brightness sensor, the device can also be used as a twilight switch.
-
XLERATOR® Hand Dryer, High-Speed, Energy-Efficient, Surface Mount, Zinc
|Excel Dryer is proud to announce a breakthrough in hand drying technology. The XLERATOR hand dryers deliver 3 times faster hand drying power. A user's hands will be thoroughly dry in only 10 to 15 seconds. The XLERATOR hand dryer is the result of a two-year research project, in which we studied every detail of the hand-drying process, with countless hours of field testing, listening to what users had to say, and, as a result, developed the patented technology behind the best hand dryer in the business. The benefits of the XLERATOR include:<br><ul><li>FAST! Dry hands completely in 10-15 Seconds</li><li>Uses 80% Less Energy than other hand dryers</li><li>95% Cost Savings vs. Paper Towels</li><li>GREENSPEC&reg; Listed and Helps Qualify for LEED&reg; Credits</li><li>Promotes Hygiene (automatic sensor activated)</li><li>Source Reduction Alternative</li></ul><br><br>Specification Tools<br><br>Product Images<br><br><br>Click diagram for enlargement.<br><br><b>Construction</b><br><br><ol><li>Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts.</li><li>Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring.</li><li>All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements.</li><li>Entire mechanism shall be internally grounded.</li></ol><p>&nbsp;&nbsp;&nbsp;</p><br><br><b>Mechanism</b><br><br><ol><li>Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet).</li><li>Hand dryer heating element (970 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet).</li><li>Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if hands are not removed.</li></ol><br><br><b>Limited Warranty</b><br>The hand dryer shall be guaranteed to be free from defects for a period of five (5) years. Warranty shall include factory performed labor as well as the repair or exchange of defective parts, at manufacturer's option.
-
XLERATOR® Hand Dryer, High-Speed, Energy-Efficient, Surface Mount, Stainless Steel
|Excel Dryer is proud to announce a breakthrough in hand drying technology. The XLERATOR hand dryers deliver 3 times faster hand drying power. A user's hands will be thoroughly dry in only 10 to 15 seconds. The XLERATOR hand dryer is the result of a two-year research project, in which we studied every detail of the hand-drying process, with countless hours of field testing, listening to what users had to say, and, as a result, developed the patented technology behind the best hand dryer in the business. The benefits of the XLERATOR include:<br><ul><li>FAST! Dry hands completely in 10-15 Seconds</li><li>Uses 80% Less Energy than other hand dryers</li><li>95% Cost Savings vs. Paper Towels</li><li>GREENSPEC&reg; Listed and Helps Qualify for LEED&reg; Credits</li><li>Promotes Hygiene (automatic sensor activated)</li><li>Source Reduction Alternative</li></ul><br><br>Specification Tools<br><br>Product Images<br><br><br>Click diagram for enlargement.<br><br><b>Construction</b><br><br><ol><li>Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts.</li><li>Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring.</li><li>All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements.</li><li>Entire mechanism shall be internally grounded.</li></ol><p>&nbsp;&nbsp;&nbsp;</p><br><br><b>Mechanism</b><br><br><ol><li>Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet).</li><li>Hand dryer heating element (970 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet).</li><li>Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if hands are not removed.</li></ol><br><br><b>Limited Warranty</b><br>The hand dryer shall be guaranteed to be free from defects for a period of five (5) years. Warranty shall include factory performed labor as well as the repair or exchange of defective parts, at manufacturer's option.
-
XLERATOR® Hand Dryer, High-Speed, Energy-Efficient, Surface Mount, BMC White
|Excel Dryer is proud to announce a breakthrough in hand drying technology. The XLERATOR hand dryers deliver 3 times faster hand drying power. A user's hands will be thoroughly dry in only 10 to 15 seconds. The XLERATOR hand dryer is the result of a two-year research project, in which we studied every detail of the hand-drying process, with countless hours of field testing, listening to what users had to say, and, as a result, developed the patented technology behind the best hand dryer in the business. The benefits of the XLERATOR include:<br><ul><li>FAST! Dry hands completely in 10-15 Seconds</li><li>Uses 80% Less Energy than other hand dryers</li><li>95% Cost Savings vs. Paper Towels</li><li>GREENSPEC&reg; Listed and Helps Qualify for LEED&reg; Credits</li><li>Promotes Hygiene (automatic sensor activated)</li><li>Source Reduction Alternative</li></ul><br><br>Specification Tools<br><br>Product Images<br><br><br>Click diagram for enlargement.<br><br><b>Construction</b><br><br><ol><li>Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced, die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy paint and fastened to a wall plate by two chrome plated tamper-proof bolts.</li><li>Hand dryer wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring.</li><li>All internal hand dryer parts shall be coated according to Underwriters' Laboratories, Inc. requirements.</li><li>Entire mechanism shall be internally grounded.</li></ol><p>&nbsp;&nbsp;&nbsp;</p><br><br><b>Mechanism</b><br><br><ol><li>Hand dryer motor shall be a series commutated through-flow discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air velocity of 16,000 LFM (linear feet per minute) at the air outlet and 14,000 LFM at the hands (4 inches [102 mm] below air outlet).</li><li>Hand dryer heating element (970 W) is constructed of Nichrome wire and mounted inside the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands (4 inches [102 mm] below air outlet).</li><li>Hand dryer Control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are under the air outlet. There is a 35-second lockout feature if hands are not removed.</li></ol><br><br><b>Limited Warranty</b><br>The hand dryer shall be guaranteed to be free from defects for a period of five (5) years. Warranty shall include factory performed labor as well as the repair or exchange of defective parts, at manufacturer's option.
-
Rockfon Hygienic
|[LIST] Developed to meet the exacting standards of electronics and food processing industries. A non-hygroscopic, durable ceiling tile that withstands cleaning by pressure washing. Coupled with longevity, durability and high sound absorption, Rockfon Hygienic is suitable for clean room type environments. [/LIST]
-
Rockfon MediCare Block
|[LIST] Specifically designed for use in high-risk, pressurised healthcare environments where high cleanability is required such as emergency rooms, washing facilities and intensive care (compliant with HBN 00-10, TDM 4032:0.6 and HTM 60). For use in operating theatres, seek client approval. Does not contribute to the growth of MRSA, high-rated Bacteriological Class B1 and Clean Room Classification ISO Class 2. Very good cleanability properties, chemical resistance classification ‘Excellent’. [/LIST]
-
Screed-flush trunking system BKB
|Screed-flush trunking BKB: Perfectly integrated With the screed-flush trunking system BKB, energy, data and communication connections can be fl exibly provided anywhere they are needed – even in rooms with glass walls or large window surface. The system could not be simpler: Thanks to the range of specially shaped elements in the BKB system, concealed lines can be routed to any corner of the room.
-
Wind, table 460x443 H555
|Following the instant success of our Wind room dividers, Jin Kuramoto has designed a new side table with his same trademark irregular, organic shapes. The table was commissioned exclusively for the new Zander K hotel in Bergen, Norway, with interiors by architects Claesson Koivisto Rune. The table comes in two heights, manufactured in a monochrome, stone-resembling material. ”I like to see the tables as rocks in a forest,” says Jin Kuramoto. ”As the Wind room dividers became so popular even before they were properly launched, there is demand for a table that speaks the same organic form language,” says Anders Englund, Design Manager at Offecct. ”They are designed to work together in for example a hotel lobby or in an office landscape, but the table will also hold its own very well in any kind of interior environment.”
-
Wind, table 605x375 H505
|Following the instant success of our Wind room dividers, Jin Kuramoto has designed a new side table with his same trademark irregular, organic shapes. The table was commissioned exclusively for the new Zander K hotel in Bergen, Norway, with interiors by architects Claesson Koivisto Rune. The table comes in two heights, manufactured in a monochrome, stone-resembling material. ”I like to see the tables as rocks in a forest,” says Jin Kuramoto. ”As the Wind room dividers became so popular even before they were properly launched, there is demand for a table that speaks the same organic form language,” says Anders Englund, Design Manager at Offecct. ”They are designed to work together in for example a hotel lobby or in an office landscape, but the table will also hold its own very well in any kind of interior environment.”
-
Hygiene LabotecAir™ A
|Ecophon Hygiene LabotecAir A is a wall to wall, sound-absorbing ceiling system intended for environments where there are demands on low particle emission, air pressure control and where occasional wet wiping and/or disinfection is required. Examples of applications: laboratories, the pharmaceutical and electronics industries and in healthcare premises. The system is classified B1, B5 and B10 for zone 4 according to standard NF S 90-351 and clean room classified according ISO 5. The system consists of Ecophon Hygiene LabotecAir A tiles, which have a core of high density glass wool and a painted particle-repellent Akutex™ HP surface. The back of the tile is covered with a airtight glass tissue. The edges are painted. The supporting structure is an exposed Connect T24 grid of galvanised steel. The weight of the system is 3-4 kg/m². The tiles should be secured to the grid with Connect Hygiene clips in order to withstand air pressure.
-
External Venetian Blind Solomatic II
|Solomatic® II is available in two versions: as Solomatic® II 80 and as Solomatic® II 70 for narrow installation conditions. The Solomatic® II Reflect system offers two different slat positions in one. The lower blinds zone protects against unwanted glare when working with a monitor. The upper zone directs the light into the interior of the room and ensures a pleasant sense of space.
-
External Venetian Blind Lamisol III
|Lamisol® III is available in two versions: as Lamisol® III 90 and as Lamisol® III 70 for narrow installation conditions. Lamisol® III Reflect offers a number of different slat positions in one: The lower blinds zone protects against unwanted glare when working with a monitor, the middle zone ensures beneficial daylight and the upper one directs the light into the interior of the room and creates a pleasant sense of space. This makes the daylight optimally usable in every situation.
-
KNX Motor Controls
|The elaborate and robust motor control is used for shading with façade products like venetian blinds, rolling shutters, awnings and façade awnings and boasts all the necessary features to do so. Thanks to sophisticated end position detection, the system is moved into the shading position and the room is only in shade for a short period of time. Measuring and analyzing the operating time enables the façade product to be moved into the exact position. The aging process and fluctuations in temperature are thereby automatically taken into account. The automatic solar tracking control, which features 4 preset operating positions – privacy, shading below, shading above and transparency –, offers a high level of comfort in the workplace and at home. “Limited operation” also guarantees optimum product protection if it’s windy or frosty. The façade product can still be operated in a reduced, secure area. Standard pushbuttons or control cables can be directly connected to the binary inputs on the device. The connection input statuses affect the motors or they can be sent on the BUS as KNX products.
-
Loft ladder LWF | FAKRO
|Enable safe and easy access to non-inhabited loft spaces without the need for installing costly and space consuming staircases. FAKRO Folding Ladders satisfy all technical and safety requirements whilst maximising ease of use and comfort. Space Savings FAKRO Loft Ladders require little space to operate in. When folded, the sections are concealed inside the Loft Space, maximising space in the room below. Ease of Installation The Installation system ensures that the Ladder can be easily installed by two individuals. Height can be easily adjusted to suit room height. Ladders come as fully assembled products and do not require any additional pre-installation work. Ease of Operation The compact structure of the hatch facilitates ease of operation of the Loft Ladder. An opening rod is supplied with every Loft Ladder enabling the user to open and close the unit with ease. Additional Equipment In order to maximise comfort and accelerate installation of the Loft Ladder, additional accessories are available. Warranty FAKRO loft ladders come with a 3-year warranty.
-
Loft ladder LWK komfort | FAKRO
|Enable safe and easy access to non-inhabited loft spaces without the need for installing costly and space consuming staircases. FAKRO Folding Ladders satisfy all technical and safety requirements whilst maximising ease of use and comfort. Space Savings FAKRO Loft Ladders require little space to operate in. When folded, the sections are concealed inside the Loft Space, maximising space in the room below. Ease of Installation The Installation system ensures that the Ladder can be easily installed by two individuals. Height can be easily adjusted to suit room height. Ladders come as fully assembled products and do not require any additional pre-installation work. Ease of Operation The compact structure of the hatch facilitates ease of operation of the Loft Ladder. An opening rod is supplied with every Loft Ladder enabling the user to open and close the unit with ease. Additional Equipment In order to maximise comfort and accelerate installation of the Loft Ladder, additional accessories are available. -Stile ends (only in 3-section ladders); -White hatch white hatch; -Peripheral seal peripheral seal; -Treads set flush with ladder strings non-slip treads protruding from strings; -Handrail handrail; -Possibility of installing additional accessories possibility of installing additional accessories; -Fully assembled fully assembled and ready for quick installation in the ceiling; Warranty FAKRO loft ladders come with a 3-year warranty.
-
Loft ladder LWS Smart | FAKRO
|Enable safe and easy access to non-inhabited loft spaces without the need for installing costly and space consuming staircases. FAKRO Folding Ladders satisfy all technical and safety requirements whilst maximising ease of use and comfort. Space Savings FAKRO Loft Ladders require little space to operate in. When folded, the sections are concealed inside the Loft Space, maximising space in the room below. Ease of Installation The Installation system ensures that the Ladder can be easily installed by two individuals. Height can be easily adjusted to suit room height. Ladders come as fully assembled products and do not require any additional pre-installation work. Ease of Operation The compact structure of the hatch facilitates ease of operation of the Loft Ladder. An opening rod is supplied with every Loft Ladder enabling the user to open and close the unit with ease. Additional Equipment In order to maximise comfort and accelerate installation of the Loft Ladder, additional accessories are available. The LWS Plus is a 3 or 4 section wooden loft ladder with insulated beige hatch. Innovative solutions applied in a new design of the LWS Smart loft ladder ensure the highest comfort of use as well as quick and easy installation in the ceiling. -Beige hatch -Peripheral seal peripheral seal -Treads set flush with ladder strings treads set flush with ladder strings -Possibility of installing additional accessories possibility of installing additional accessories -Fully assembled fully assembled and ready for quick installation in the ceiling -3 year warranty 3 year warranty Warranty FAKRO loft ladders come with a 3-year warranty.
-
Loft ladder LWT | FAKRO
|Enable safe and easy access to non-inhabited loft spaces without the need for installing costly and space consuming staircases. FAKRO Folding Ladders satisfy all technical and safety requirements whilst maximising ease of use and comfort. Space Savings FAKRO Loft Ladders require little space to operate in. When folded, the sections are concealed inside the Loft Space, maximising space in the room below. Ease of Installation The Installation system ensures that the Ladder can be easily installed by two individuals. Height can be easily adjusted to suit room height. Ladders come as fully assembled products and do not require any additional pre-installation work. Ease of Operation The compact structure of the hatch facilitates ease of operation of the Loft Ladder. An opening rod is supplied with every Loft Ladder enabling the user to open and close the unit with ease. Additional Equipment In order to maximise comfort and accelerate installation of the Loft Ladder, additional accessories are available. The LWT loft ladder is a highly insulated (U=0.51 W/m²K) ladder intended for energy efficient buildings where great emphasis is placed on minimizing heat loss. The ladder features the highest rating of air tightness - Class 4. -Stile ends -White hatch white hatch -Three peripheral seals three seals -Treads set flush with ladder strings non-slip treads set flush with ladder strings -Handrail handrail -Easy fitting easy installation -Possibility of installing additional accessories possibility of installing additional accessories -Fully assembled fully assembled and ready for quick installation in the ceiling Warranty FAKRO loft ladders come with a 3-year warranty.
-
Top hung and pivot window FPP-V preSelect U3 | FAKRO
|FPP-V U3 preSelect - wooden window with air-inlet V40P. Two independent opening mechanisms of the sash: outward and pivot opening. The outward opening function enables the sash to be opened in any position from 0 to 35 degrees, pivot function enables the sash to be rotated through 180 degrees. The outward opening function enables an easy approach to the window and providing a wide view to the outside. An innovative hardware system guarantees full sash stability in both opening functions. Opening method can be switched using the preSelect sliding switch positioned in the middle of the frame, accessible when the window is open. Easy operation by the use of handle positioned on the lower part of the sash. Handle equipped with two stage micro-ventilation. Windows FPP-V are equipped with an automatic ventilator V40P provides the optimum amount of air into the room. V40P automatic air-inlet ensures a healthy micro-climate in the attic and saves energy. Easy cleaning of the outer pane and easy awning blind installation thanks to the bolt blocking the sash rotated through 180 degrees. Warranty: 10 years warranty period for window, lifetime – glazing until hail resistance warranty.
-
Top hung and pivot window FPP-V preSelect U5 | FAKRO
|FPP-V U5 preSelect - wooden window with air-inlet V40P. Two independent opening mechanisms of the sash: outward and pivot opening. The outward opening function enables the sash to be opened in any position from 0 to 35 degrees, pivot function enables the sash to be rotated through 180 degrees. The outward opening function enables an easy approach to the window and providing a wide view to the outside. An innovative hardware system guarantees full sash stability in both opening functions. Opening method can be switched using the preSelect sliding switch positioned in the middle of the frame, accessible when the window is open. Easy operation by the use of handle positioned on the lower part of the sash. Handle equipped with two stage micro-ventilation. Windows FPP-V are equipped with an automatic ventilator V40P provides the optimum amount of air into the room. V40P automatic air-inlet ensures a healthy micro-climate in the attic and saves energy. Easy cleaning of the outer pane and easy awning blind installation thanks to the bolt blocking the sash rotated through 180 degrees. Warranty: 10 years warranty period for window, lifetime – glazing until hail resistance warranty.
-
Top hung and pivot window FPU-V preSelect U3 | FAKRO
|FPU-V U3 preSelect - wooden window with air-inlet V40P coated with polyurethane varnish. Two independent opening mechanisms of the sash: outward and pivot opening. The outward opening function enables the sash to be opened in any position from 0 to 35 degrees, pivot function enables the sash to be rotated through 180 degrees. The outward opening function enables an easy approach to the window and providing a wide view to the outside. An innovative hardware system guarantees full sash stability in both opening functions. Opening method can be switched using the preSelect sliding switch positioned in the middle of the frame, accessible when the window is open. Easy operation by the use of handle positioned on the lower part of the sash. Handle equipped with two stage micro-ventilation. Windows FPU-V are equipped with an automatic ventilator V40P provides the optimum amount of air into the room. V40P automatic air-inlet ensures a healthy micro-climate in the attic and saves energy. Easy cleaning of the outer pane and easy awning blind installation thanks to the bolt blocking the sash rotated through 180 degrees. Warranty: 10 years warranty period for window, lifetime – glazing until hail resistance warranty.
-
Revet, bicycle shelter, 5 bicycles
|The Revet bicycle shelter is a purpose-built enclosure with plenty of room for bicycles. The easy-to-assemble prefabricated structure is built with a durable roof wooden roof that curves downward to create a wall. Several structures can be combined side-by-side to create a bigger shelter with room for more bicycles. Revet offers a value-for-money shelter with the potential to be extended according to specific requirements. Design: Bengt Isling.
-
Revet, bicycle shelter start section, 10 bicycles
|The Revet bicycle shelter is a purpose-built enclosure with plenty of room for bicycles. The easy-to-assemble prefabricated structure is built with a durable roof wooden roof that curves downward to create a wall. Several structures can be combined side-by-side to create a bigger shelter with room for more bicycles. Revet offers a value-for-money shelter with the potential to be extended according to specific requirements. Design: Bengt Isling.
-
Delta Laserline
|Purmo’s Delta Laserline column radiators integrate the state of the art technology with remarkable design, providing their Users with highest qualities of climate comfort and functionality. The world-unique laser welding method enables achievement of the perfect quality of execution combined with outstanding visual appearance. The characteristic feature – which inspired the radiators’ name – is the external shape of the columns, of the profile resembling the letter “D”, designed especially to maximize the heating surface area in comparison with analogical columns of the round shape. The construction and shape of the Delta radiators have been so designed as to facilitate maintaining them spotlessly clean, which is a vital feature when considering health care facilities application. High suitability of Purmo’s DELTA radiators for the rooms of elevated sanitary requirements is documented with the dedicated certifi cate, issued by the University of Kiel, Germany. Except for 27 radiator heights available as standard, at Clients’ wish any height can be manufactured in the range between 300 mm and 3000 mm, with the precision of 1 mm. Thanks to five types of the radiator’s segments (from 2 up to 6 columns), and a wide palette of RAL colours, the Delta Laserline radiators can be easily suited to any room, independently on the heat requirements or the Users’ preferences.
-
KANECCT - Table 600x700
|The Kanecct table system consists of tables with leg frames and connecting tabletops between the tables. The tables can be handled easily by just one person. Kanecct is ideal where flexibility is key. A room can quickly be transformed from being furnished with individual tables to being furnished with one long table – or from offering maximum seating to no seating at all. The tables can be stacked on top of each other to free up floor space. Store connecting tabletops on a trolley or hang them on the wall. The tables come in a width of 700 mm and lengths of 600, 700 and 1250 mm. Legs come in white or black powder coated steel. Connecting tabletops come in a width of 700 mm and in lengths of 700, 1250 and 1850 mm. All tabletops and connecting tabletops are made of framed construction with tops in veneers of oak, birch or ash, white or black laminate, black desktop or standard stains on ash. The underside of each table includes a sound-absorbent pad, stacking and saftey cover.
-
KANECCT - Table 1250x700
|The Kanecct table system consists of tables with leg frames and connecting tabletops between the tables. The tables can be handled easily by just one person. Kanecct is ideal where flexibility is key. A room can quickly be transformed from being furnished with individual tables to being furnished with one long table – or from offering maximum seating to no seating at all. The tables can be stacked on top of each other to free up floor space. Store connecting tabletops on a trolley or hang them on the wall. The tables come in a width of 700 mm and lengths of 600, 700 and 1250 mm. Legs come in white or black powder coated steel. Connecting tabletops come in a width of 700 mm and in lengths of 700, 1250 and 1850 mm. All tabletops and connecting tabletops are made of framed construction with tops in veneers of oak, birch or ash, white or black laminate, black desktop or standard stains on ash. The underside of each table includes a sound-absorbent pad, stacking and saftey cover.
-
KANECCT - Table 700x700
|The Kanecct table system consists of tables with leg frames and connecting tabletops between the tables. The tables can be handled easily by just one person. Kanecct is ideal where flexibility is key. A room can quickly be transformed from being furnished with individual tables to being furnished with one long table – or from offering maximum seating to no seating at all. The tables can be stacked on top of each other to free up floor space. Store connecting tabletops on a trolley or hang them on the wall. The tables come in a width of 700 mm and lengths of 600, 700 and 1250 mm. Legs come in white or black powder coated steel. Connecting tabletops come in a width of 700 mm and in lengths of 700, 1250 and 1850 mm. All tabletops and connecting tabletops are made of framed construction with tops in veneers of oak, birch or ash, white or black laminate, black desktop or standard stains on ash. The underside of each table includes a sound-absorbent pad, stacking and saftey cover.
-
KANECCT - Connection Top 1250x700
|The Kanecct table system consists of tables with leg frames and connecting tabletops between the tables. The tables can be handled easily by just one person. Kanecct is ideal where flexibility is key. A room can quickly be transformed from being furnished with individual tables to being furnished with one long table – or from offering maximum seating to no seating at all. The tables can be stacked on top of each other to free up floor space. Store connecting tabletops on a trolley or hang them on the wall. The tables come in a width of 700 mm and lengths of 600, 700 and 1250 mm. Legs come in white or black powder coated steel. Connecting tabletops come in a width of 700 mm and in lengths of 700, 1250 and 1850 mm. All tabletops and connecting tabletops are made of framed construction with tops in veneers of oak, birch or ash, white or black laminate, black desktop or standard stains on ash. The underside of each table includes a sound-absorbent pad, stacking and saftey cover.
-
KANECCT - Connection Top 1850x700
|The Kanecct table system consists of tables with leg frames and connecting tabletops between the tables. The tables can be handled easily by just one person. Kanecct is ideal where flexibility is key. A room can quickly be transformed from being furnished with individual tables to being furnished with one long table – or from offering maximum seating to no seating at all. The tables can be stacked on top of each other to free up floor space. Store connecting tabletops on a trolley or hang them on the wall. The tables come in a width of 700 mm and lengths of 600, 700 and 1250 mm. Legs come in white or black powder coated steel. Connecting tabletops come in a width of 700 mm and in lengths of 700, 1250 and 1850 mm. All tabletops and connecting tabletops are made of framed construction with tops in veneers of oak, birch or ash, white or black laminate, black desktop or standard stains on ash. The underside of each table includes a sound-absorbent pad, stacking and saftey cover.
-
KANECCT - Connection Top 700x700
|The Kanecct table system consists of tables with leg frames and connecting tabletops between the tables. The tables can be handled easily by just one person. Kanecct is ideal where flexibility is key. A room can quickly be transformed from being furnished with individual tables to being furnished with one long table – or from offering maximum seating to no seating at all. The tables can be stacked on top of each other to free up floor space. Store connecting tabletops on a trolley or hang them on the wall. The tables come in a width of 700 mm and lengths of 600, 700 and 1250 mm. Legs come in white or black powder coated steel. Connecting tabletops come in a width of 700 mm and in lengths of 700, 1250 and 1850 mm. All tabletops and connecting tabletops are made of framed construction with tops in veneers of oak, birch or ash, white or black laminate, black desktop or standard stains on ash. The underside of each table includes a sound-absorbent pad, stacking and saftey cover.
-
Norden mattress cabinet B150xD60xH150 birch
|Complete mattress cabinet on the plinth base with room for 18 resting mattresses or 12 bunk beds. Solid in direct laminate, available in 3 different versions. Doors are available in 7 different high pressure laminates. Ventilation in the upper and lower edges of the doors. Lightweight and well ventilated.
-
Norden mattress cabinet B150xD60xH150 white
|Complete mattress cabinet on the plinth base with room for 18 resting mattresses or 12 bunk beds. Solid in direct laminate, available in 3 different versions. Doors are available in 7 different high pressure laminates. Ventilation in the upper and lower edges of the doors. Lightweight and well ventilated.
-
Norden mattress cabinet B150xD60xH150 grey
|Complete mattress cabinet on the plinth base with room for 18 resting mattresses or 12 bunk beds. Solid in direct laminate, available in 3 different versions. Doors are available in 7 different high pressure laminates. Ventilation in the upper and lower edges of the doors. Lightweight and well ventilated.
-
Premium EASYMATIC Z8/L
|Premium Easymatic movable wall, parking position Z8/L – Perfect in form and function. The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 57 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate.
-
Premium CLASSIC Z8/L
|Premium Classic movable wall, parking position Z8/L - Perfect in form and function The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 59 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate. It is also possible to provide the walls with fire and smoke protection. The semiautomatic Nüsing EASYmatic® system offers you increased comfort and user-friendliness.
-
Premium EASYMATIC Z2/K
|Premium Easymatic movable wall, parking position Z2/K – Perfect in form and function. The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 57 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate.
-
Premium CLASSIC Z2/K
|Premium Classic movable wall, parking position Z2/K - Perfect in form and function The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 59 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate. It is also possible to provide the walls with fire and smoke protection. The semiautomatic Nüsing EASYmatic® system offers you increased comfort and user-friendliness.
-
Premium EASYMATIC Z3/K
|Premium Easymatic movable wall, parking position Z3/K – Perfect in form and function. The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 57 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate.
-
Premium CLASSIC Z3/K
|Premium Classic movable wall, parking position Z3/K - Perfect in form and function The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 59 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate. It is also possible to provide the walls with fire and smoke protection. The semiautomatic Nüsing EASYmatic® system offers you increased comfort and user-friendliness.
-
Premium EASYMATIC Z4/K
|Premium Easymatic movable wall, parking position Z4/K – Perfect in form and function. The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 57 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate.
-
Premium CLASSIC Z4/K
|Premium Classic movable wall, parking position Z4/K - Perfect in form and function The Nüsing company, with its policy of continuous R+D work, has positioned a state-of –the-art and reliable product in the movable wall sector of the market. It’s up to you whether you use the whole room as a single, large unit, or sub-divide it into smaller rooms, which then can all be used at the same time. To ensure that rooms can be used without noise disturbance, our walls can be made with sound reduction values of up to 59 dB. Nüsing walls are suspended from a ceiling track and are easy and quick to operate. It is also possible to provide the walls with fire and smoke protection. The semiautomatic Nüsing EASYmatic® system offers you increased comfort and user-friendliness.
-
C.03 : Lam. Safety & Acoustic - Window - C2C Stratophone
|Sound pollution can be a problem in any environment. Offering high-level acoustic insulation, Stratophone has the same safety protection as Stratobel, but also absorbs sound and resists noise. This is thanks to a special acoustic PVB layer that acts as a barrier from noise passing through a glazing, for example between a noisy external environment and a quiet room inside a building. The higher the acoustic insulation of the glazing, the higher the comfort level which positively impacts health and well-being. Depending on the requirement of combined safety and enhanced acoustic insulation, different thicknesses of glass and the number of PVB interlayers, this fully transparent-looking glass can be used in facades and interior design projects. A PVB White is available which looks like a sand-blasted or etched glass which can be used as is to provide privacy.
-
INTRA Endura wash basin
|Intra provides a wide range of basins for wall-, inset-, and under-mounting. We also offer vandal-resistant solutions. Stainless steel gives a modern, sleek impression, is maintenance-free and extremely durable. Hand Wash basin with closed shroud for concealed drainage and water connections, Integrated waste and water trap. Also available for bolt-mounting from service room. Wash basin, vandal resistant basin for wall mounting in stainless steel. With closed shroud for concealed in- and outlet. Supplied with integrated waste and water trap. Outer dimension: 331 x 338 x 239 mm
-
Shower wall U-shaped showcase
|This product is only available for the Swedish market. Alterna U-shower allows for many different types of installations: mount in corners, on a straight wall or by a window. The doors can also be opened inwards, to save space. The shower doors have adjustable wall profiles and they are raised 5 mm at opening. Comes complete with bottom barrier, screw and plug. 2 doors Silver colored aluminum profiles Clear glass 6 mm tempered safety glass Room for outside pipes 25-35 mm Adjustable wall profiles 10 mm
-
Combo Cross 600x2100 Large cross
|Combo Cross can be seen as a version of the famous Crux Blanket from 1991. Here too, the basic function is to protect, not from cold, however, but from noise, and to offer a simple means to divide a space into smaller units. The vertical hanging room dividers are made from compressed felt fabric with a sound absorbing core. Available in different cross pattern with different degree of transparency. The panels comes with or without the hand-sewn stitch.
-
Combo Cross 600x2100 Perforated cross
|Combo Cross can be seen as a version of the famous Crux Blanket from 1991. Here too, the basic function is to protect, not from cold, however, but from noise, and to offer a simple means to divide a space into smaller units. The vertical hanging room dividers are made from compressed felt fabric with a sound absorbing core. Available in different cross pattern with different degree of transparency. The panels comes with or without the hand-sewn stitch.
-
Combo Cross 600x2100 Slits cross
|Combo Cross can be seen as a version of the famous Crux Blanket from 1991. Here too, the basic function is to protect, not from cold, however, but from noise, and to offer a simple means to divide a space into smaller units. The vertical hanging room dividers are made from compressed felt fabric with a sound absorbing core. Available in different cross pattern with different degree of transparency. The panels comes with or without the hand-sewn stitch.
-
Combo Cross 600x2100 Small cross
|Combo Cross can be seen as a version of the famous Crux Blanket from 1991. Here too, the basic function is to protect, not from cold, however, but from noise, and to offer a simple means to divide a space into smaller units. The vertical hanging room dividers are made from compressed felt fabric with a sound absorbing core. Available in different cross pattern with different degree of transparency. The panels comes with or without the hand-sewn stitch.
-
Combo Cross 600x2100 Solid
|Combo Cross can be seen as a version of the famous Crux Blanket from 1991. Here too, the basic function is to protect, not from cold, however, but from noise, and to offer a simple means to divide a space into smaller units. The vertical hanging room dividers are made from compressed felt fabric with a sound absorbing core. Available in different cross pattern with different degree of transparency. The panels comes with or without the hand-sewn stitch.
-
Top hung and pivot window FPU-V preSelect U5 | FAKRO
|FPU-V U5 preSelect - wooden window with air-inlet V40P coated with polyurethane varnish. Two independent opening mechanisms of the sash: outward and pivot opening. The outward opening function enables the sash to be opened in any position from 0 to 35 degrees, pivot function enables the sash to be rotated through 180 degrees. The outward opening function enables an easy approach to the window and providing a wide view to the outside. An innovative hardware system guarantees full sash stability in both opening functions. Opening method can be switched using the preSelect sliding switch positioned in the middle of the frame, accessible when the window is open. Easy operation by the use of handle positioned on the lower part of the sash. Handle equipped with two stage micro-ventilation. Windows FPU-V are equipped with an automatic ventilator V40P provides the optimum amount of air into the room. V40P automatic air-inlet ensures a healthy micro-climate in the attic and saves energy. Easy cleaning of the outer pane and easy awning blind installation thanks to the bolt blocking the sash rotated through 180 degrees. Warranty: 10 years warranty period for window, lifetime – glazing until hail resistance warranty.
-
K2 Seat - ergonomic pouf
|In the beginning K2 Seat might seem like an advanced balance exercise, but as soon as you get your grip on it the comfort is incomparable to any other pouf. Besides strengthening your balance and posture the K2 Seat creates an exceptional experience. In meetings the K2 Seat opens up for playful ideas and a dynamic dialog. But the pouf works at the dining table, at your desk or in the living room as well. The ergonomic bottom of the pouf is made of solid cork with an integrated tilt that makes sure that the K2 Seat can gently move around on the floor without making any noise or damage. The optional hook, which is fastened on the bottom under the upholstery, makes it possible to easily move the pouf around if you wish to do so.
-
K2 Note - 600x650
|K2 Note is very easy to stack and moving it around is a piece of cake. That makes the table an obvious solution for the classroom but also conference rooms or cafeterias. K2 Note has a large number of options in terms of colours. So for private use as a desk the table can easily be adjusted to both your daughter’s pink princess room or the colour of your son’s favourite soccer team. K2 Note comes in two different sizes, for 1 person or 2, which makes the table even more versatile. Both variations are made out of 14 mm thick powdercoated steel rod in the standard colours black or white while the 16 mm thick table top comes in several different colours in materials like linoleum, laminate and oak.
-
K2 Note - 600x1250
|K2 Note is very easy to stack and moving it around is a piece of cake. That makes the table an obvious solution for the classroom but also conference rooms or cafeterias. K2 Note has a large number of options in terms of colours. So for private use as a desk the table can easily be adjusted to both your daughter’s pink princess room or the colour of your son’s favourite soccer team. K2 Note comes in two different sizes, for 1 person or 2, which makes the table even more versatile. Both variations are made out of 14 mm thick powdercoated steel rod in the standard colours black or white while the 16 mm thick table top comes in several different colours in materials like linoleum, laminate and oak.
-
K2 Note - 480x650
|K2 Note is very easy to stack and moving it around is a piece of cake. That makes the table an obvious solution for the classroom but also conference rooms or cafeterias. K2 Note has a large number of options in terms of colours. So for private use as a desk the table can easily be adjusted to both your daughter’s pink princess room or the colour of your son’s favourite soccer team. K2 Note comes in two different sizes, for 1 person or 2, which makes the table even more versatile. Both variations are made out of 14 mm thick powdercoated steel rod in the standard colours black or white while the 16 mm thick table top comes in several different colours in materials like linoleum, laminate and oak.
-
K2 Note - 480x1250
|K2 Note is very easy to stack and moving it around is a piece of cake. That makes the table an obvious solution for the classroom but also conference rooms or cafeterias. K2 Note has a large number of options in terms of colours. So for private use as a desk the table can easily be adjusted to both your daughter’s pink princess room or the colour of your son’s favourite soccer team. K2 Note comes in two different sizes, for 1 person or 2, which makes the table even more versatile. Both variations are made out of 14 mm thick powdercoated steel rod in the standard colours black or white while the 16 mm thick table top comes in several different colours in materials like linoleum, laminate and oak.
-
K2 Eating - L1200
|The inspiration for the K2 Eating is impossible to miss. The table is identical to the square K2 Meeting and the benches are smaller versions of the table. The result is a very functional table set with a homogenous look. K2 Eating is extremely solid so if you accidentally sit on the very edge of the bench there no need to fear – It will certainly not tilt anywhere. That means that with K2 Eating there’s always room for one more which makes the table highly suitable for cafeterias where a bunch a people socialise. A base in black powdercoated steel and an additional frame creates the stability of the K2 Eating. The tops are made out of MDF, the surfaces are covered by linoleum or laminate while the edges are covered by ABS. When these materials are combined it creates a high quality product that can make it through just about anything, for example a wet cloth or a vacuum cleaner. A vivid expression can be added to the table set by replacing the homogenous look with colours on the surfaces.
-
K2 Eating - L1600
|The inspiration for the K2 Eating is impossible to miss. The table is identical to the square K2 Meeting and the benches are smaller versions of the table. The result is a very functional table set with a homogenous look. K2 Eating is extremely solid so if you accidentally sit on the very edge of the bench there no need to fear – It will certainly not tilt anywhere. That means that with K2 Eating there’s always room for one more which makes the table highly suitable for cafeterias where a bunch a people socialise. A base in black powdercoated steel and an additional frame creates the stability of the K2 Eating. The tops are made out of MDF, the surfaces are covered by linoleum or laminate while the edges are covered by ABS. When these materials are combined it creates a high quality product that can make it through just about anything, for example a wet cloth or a vacuum cleaner. A vivid expression can be added to the table set by replacing the homogenous look with colours on the surfaces.
-
K2 Eating - L2000
|The inspiration for the K2 Eating is impossible to miss. The table is identical to the square K2 Meeting and the benches are smaller versions of the table. The result is a very functional table set with a homogenous look. K2 Eating is extremely solid so if you accidentally sit on the very edge of the bench there no need to fear – It will certainly not tilt anywhere. That means that with K2 Eating there’s always room for one more which makes the table highly suitable for cafeterias where a bunch a people socialise. A base in black powdercoated steel and an additional frame creates the stability of the K2 Eating. The tops are made out of MDF, the surfaces are covered by linoleum or laminate while the edges are covered by ABS. When these materials are combined it creates a high quality product that can make it through just about anything, for example a wet cloth or a vacuum cleaner. A vivid expression can be added to the table set by replacing the homogenous look with colours on the surfaces.
-
K2 Depot - 1800-3
|If you decorate your living room with the K2 Depot the shelving unit can be used to hide your childrens’ PlayStation when you’re having guests over or it can serve as a platform for your coffee table books, graphical posters or decorative items. The K2 Depot is delightful to look at with its sharp, harmonic lines and very thin sliding doors placed on the outside of the cabinet. This doesn’t only contribute to the elegance of the storage unit but also makes sure that the sliding doors move with no air and very precisely. The cabinet comes in black or white and there are varies colour options when it comes to the sliding doors. The optional OSB wood creates a contrast to the fine lines of the cabinet and contributes with a rustic look whereas the choice of K2 colours gives the storage unit a more vivid look. The storage unit comes in three heights and two widths so it can function in the living room as well as in the office or in smaller corners. The cabinet rests on four legs of black powdercoated steel but alternatively a plinth can be attached.
-
K2 Depot - 1800-2
|If you decorate your living room with the K2 Depot the shelving unit can be used to hide your childrens’ PlayStation when you’re having guests over or it can serve as a platform for your coffee table books, graphical posters or decorative items. The K2 Depot is delightful to look at with its sharp, harmonic lines and very thin sliding doors placed on the outside of the cabinet. This doesn’t only contribute to the elegance of the storage unit but also makes sure that the sliding doors move with no air and very precisely. The cabinet comes in black or white and there are varies colour options when it comes to the sliding doors. The optional OSB wood creates a contrast to the fine lines of the cabinet and contributes with a rustic look whereas the choice of K2 colours gives the storage unit a more vivid look. The storage unit comes in three heights and two widths so it can function in the living room as well as in the office or in smaller corners. The cabinet rests on four legs of black powdercoated steel but alternatively a plinth can be attached.
-
K2 Depot - 900-3
|If you decorate your living room with the K2 Depot the shelving unit can be used to hide your childrens’ PlayStation when you’re having guests over or it can serve as a platform for your coffee table books, graphical posters or decorative items. The K2 Depot is delightful to look at with its sharp, harmonic lines and very thin sliding doors placed on the outside of the cabinet. This doesn’t only contribute to the elegance of the storage unit but also makes sure that the sliding doors move with no air and very precisely. The cabinet comes in black or white and there are varies colour options when it comes to the sliding doors. The optional OSB wood creates a contrast to the fine lines of the cabinet and contributes with a rustic look whereas the choice of K2 colours gives the storage unit a more vivid look. The storage unit comes in three heights and two widths so it can function in the living room as well as in the office or in smaller corners. The cabinet rests on four legs of black powdercoated steel but alternatively a plinth can be attached.
-
K2 Depot - 900-2
|If you decorate your living room with the K2 Depot the shelving unit can be used to hide your childrens’ PlayStation when you’re having guests over or it can serve as a platform for your coffee table books, graphical posters or decorative items. The K2 Depot is delightful to look at with its sharp, harmonic lines and very thin sliding doors placed on the outside of the cabinet. This doesn’t only contribute to the elegance of the storage unit but also makes sure that the sliding doors move with no air and very precisely. The cabinet comes in black or white and there are varies colour options when it comes to the sliding doors. The optional OSB wood creates a contrast to the fine lines of the cabinet and contributes with a rustic look whereas the choice of K2 colours gives the storage unit a more vivid look. The storage unit comes in three heights and two widths so it can function in the living room as well as in the office or in smaller corners. The cabinet rests on four legs of black powdercoated steel but alternatively a plinth can be attached.
-
DAY1
|Day1 is proof of how the use of an elegant and simple design can create a product that’s admirably elegant. This daybed is infused with perfectionism with a precise stitching and carefully thought out details. This makes Day1 perfect for the lounge area where it can be placed next to newspapers, flyers and magazines. With its classic look it will be a stylish element that blends in with the rest of the interior decoration. Day1 is also very suitable for the living room. Use it as a place to relax with your feet up and a cup of coffee in your hand.
-
plusCIRCLETABLE - D600
|Concrete and stainless steel are the materials of the lounge table Plus CIRCLETABLE that has raw and aesthetic beauty as its trademark. There’s a little bit of air between the table top and the base to accentuate the sharpness of the 90 degrees angle of the three legs. However the look of the table is softened by the gentle, round shape of the table top. Plus CIRCLETABLE is kept in a modest size which refines the rustic look of the table and makes it capable of functioning as both a lounge table and a coffee table no matter the size of the room. The materials of the Plus CIRCLETABLE also make the table very solid and stable.
-
plusCIRCLETABLE - D800
|Concrete and stainless steel are the materials of the lounge table Plus CIRCLETABLE that has raw and aesthetic beauty as its trademark. There’s a little bit of air between the table top and the base to accentuate the sharpness of the 90 degrees angle of the three legs. However the look of the table is softened by the gentle, round shape of the table top. Plus CIRCLETABLE is kept in a modest size which refines the rustic look of the table and makes it capable of functioning as both a lounge table and a coffee table no matter the size of the room. The materials of the Plus CIRCLETABLE also make the table very solid and stable.
-
K2 Chair
|If you recognize something about the K2 Chair it might be due to the fact that you at some point during your school years sat in Friis & Moltkes model 6000 and struggled with words like proportionality and perfectum participium. Because the K2 Chair is a refinement of the classic school chair model 6000 which Friis & Moltke designed back in the 60’s. Back then the chair sold more than 500.000 copies. The K2 Chair can very well be used in both the class room and the conference room. Furthermore the chair is highly stackable since 50 chairs can be stacked in just 1 metre. If you look closely you’ll notice that the base of the K2 Chair consists of just one pieces of 12 mm steel rod that is brought all the way around. This method creates very round edges that soften the sharp and geometric look. The base is made out of powdercoated steel rod whereas the seat comes in blackstained ash, in oak or with upholstery in various colours.
-
DE Ytong Double Layer Wall U=0,14 W/(m²K) d=470 mm
|Double-shell brickwork – at the inside with Ytong and at the outside with Silka: If the matter is an outer shell with heavy-duty weatherproofing, you traditionally stick to a well approved double-shell brickwork. The outer shell – the Silka faced brickwork – meets structural-physical demands as well as high mechanical requirements. Due to the facade’s persistence and low amount of maintenance, those double-shell brickworks pay off fine in the long run. Between the bearing inner Ytong-shell and the weather-resistant outer Silka-shell, there’s room for additional functional layers.
-
Flat roof window DEF DU8| FAKRO
|WINDOW STRUCTURE The type F flat roof window features a sleek modern look, characterised by excellent thermal insulation parameters. The structure of the frame is the same as for flat roof windows with a dome however the main difference lies in the glazing unit which is bonded using modern manufacturing technologies to produce a highly aesthetic and innovative design. The frame is constructed of multi-chamber PVC profiles filled with insulation material. A minimalist and perfect designed DEF flat roof window has been awarded with prestigious Red Dot Design Award. D_F WINDOW - COLOURLINE VERSION The innovative flat roof window D_F ColourLine allows you to match the colour of the window finish with theexisting roof design. A wide range of colours in accordance with the RAL Classic Palette. THE EXCELLENT SOUND INSULATION The DEF flat roof window with a double-chamber DU6 glazing unit has been tested for sound insulation during heavy rain. The result obtained, LIA= 36 [dB] confirms the high level of resistance against sound penetration, therefore the window is ideal for places where peace and silence are welcome. ACCESSORIES The structure of the window enables installation of internal as well as external accessories. The external awning blind protects against room overheating while internal accessories protect from intensive sun light and provide a decorative element. INSTALLATION RANGE The type F flat roof window is suitable for roof pitches between 2 and 15 degrees. GLAZING UNITS Windows are available with two glazing units. -DU6 - Energy-efficient, double-glazed with a whole window U-value of 0.70 W/m²K ). -DU8 Passive, triple-glazed with a whole window U-value of 0,64 W/m²K AVAILABLE SIZES In addition to standard sizes, the D_F type windows can be manufactured in non-standard sizes (in the range of 60x60 - 120x220cm). This enables existing skylights which do meet current thermal insulation requirements to be replaced with ease. DEF - Electrically opened with wireless Z-Wave system. The kit includes AC adapter, remote control and rain sensor. Sash tilts 15cm. Warranty: 10 years warranty period for window lifetime – glazing until hail resistance warranty 2 years for control elements in electric versions 2 years for gas springs
-
Flat roof window DMF DU8 | FAKRO
|WINDOW STRUCTURE The type F flat roof window features a sleek modern look, characterised by excellent thermal insulation parameters. The structure of the frame is the same as for flat roof windows with a dome however the main difference lies in the glazing unit which is bonded using modern manufacturing technologies to produce a highly aesthetic and innovative design. The frame is constructed of multi-chamber PVC profiles filled with insulation material. A minimalist and perfect designed DEF flat roof window has been awarded with prestigious Red Dot Design Award. D_F WINDOW - COLOURLINE VERSION The innovative flat roof window D_F ColourLine allows you to match the colour of the window finish with theexisting roof design. A wide range of colours in accordance with the RAL Classic Palette. THE EXCELLENT SOUND INSULATION The DEF flat roof window with a double-chamber DU6 glazing unit has been tested for sound insulation during heavy rain. The result obtained, LIA= 36 [dB] confirms the high level of resistance against sound penetration, therefore the window is ideal for places where peace and silence are welcome. ACCESSORIES The structure of the window enables installation of internal as well as external accessories. The external awning blind protects against room overheating while internal accessories protect from intensive sun light and provide a decorative element. INSTALLATION RANGE The type F flat roof window is suitable for roof pitches between 2 and 15 degrees. GLAZING UNITS Windows are available with two glazing units. -DU6 - Energy-efficient, double-glazed with a whole window U-value of 0.70 W/m²K ). -DU8 Passive, triple-glazed with a whole window U-value of 0,64 W/m²K AVAILABLE SIZES In addition to standard sizes, the D_F type windows can be manufactured in non-standard sizes (in the range of 60x60 - 120x220cm). This enables existing skylights which do meet current thermal insulation requirements to be replaced with ease. DMF - manually opened by means of ZSD control rod. Sash tilts 30cm. Warranty: 10 years warranty period for window lifetime – glazing until hail resistance warranty 2 years for gas springs
-
Flat roof window DXF DU8 | FAKRO
|WINDOW STRUCTURE The type F flat roof window features a sleek modern look, characterised by excellent thermal insulation parameters. The structure of the frame is the same as for flat roof windows with a dome however the main difference lies in the glazing unit which is bonded using modern manufacturing technologies to produce a highly aesthetic and innovative design. The frame is constructed of multi-chamber PVC profiles filled with insulation material. A minimalist and perfect designed DEF flat roof window has been awarded with prestigious Red Dot Design Award. D_F WINDOW - COLOURLINE VERSION The innovative flat roof window D_F ColourLine allows you to match the colour of the window finish with theexisting roof design. A wide range of colours in accordance with the RAL Classic Palette. THE EXCELLENT SOUND INSULATION The DEF flat roof window with a double-chamber DU6 glazing unit has been tested for sound insulation during heavy rain. The result obtained, LIA= 36 [dB] confirms the high level of resistance against sound penetration, therefore the window is ideal for places where peace and silence are welcome. ACCESSORIES The structure of the window enables installation of internal as well as external accessories. The external awning blind protects against room overheating while internal accessories protect from intensive sun light and provide a decorative element. INSTALLATION RANGE The type F flat roof window is suitable for roof pitches between 2 and 15 degrees. GLAZING UNITS Windows are available with two glazing units. -DU6 - Energy-efficient, double-glazed with a whole window U-value of 0.70 W/m²K ). -DU8 Passive, triple-glazed with a whole window U-value of 0,64 W/m²K AVAILABLE SIZES In addition to standard sizes, the D_F type windows can be manufactured in non-standard sizes (in the range of 60x60 - 120x220cm). This enables existing skylights which do meet current thermal insulation requirements to be replaced with ease. DXF - non opening Warranty: 10 years warranty period for window lifetime – glazing until hail resistance warranty
-
AT Ytong Double layer dividing inner wall U=0,25 W/(m²K) d=550 mm
|The Ytong Verbundstein is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class P2 is ideal for walls that are optimized for thermal insulation. The quality class P4 is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.11 W/(mK) - Homogeneous, isotropic - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing
-
AT Ytong ETIC wall - high end eco U=0,132 W/(m²K) d=507 mm
|The Ytong Thermoblock (plus) is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.08 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing
-
AT Ytong ETIC wall - standard U=0,15 W/(m²K) d=477 mm
|The Ytong Verbundstein is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class P2 is ideal for walls that are optimized for thermal insulation. The quality class P4 is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.11 W/(mK) - Homogeneous, isotropic - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing
-
AT Ytong Load bearing inner wall U=0,53 W/(m²K) d=280 mm
|The Ytong Verbundstein is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class P2 is ideal for walls that are optimized for thermal insulation. The quality class P4 is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.11 W/(mK) - Homogeneous, isotropic - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing
-
AT Ytong Monolithic wall - high end U=0,15 W/(m²K) d=524 mm
|The Ytong Thermoblock (plus) is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.08 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing
-
AT Ytong Monolithic wall - premium U=0,19 W/(m²K) d=424 mm
|The Ytong Thermoblock (plus) is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.08 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing
-
AT Ytong Non load bearing inner wall U=0,94 W/(m²K) d=150 mm
|The Ytong Verbundstein is suitable for all non-bearing, bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class P2 is ideal for walls that are optimized for thermal insulation. The quality class P4 is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.11 W/(mK) - Homogeneous, isotropic - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing
-
Loudspeaker - VECTOR-CD896
|Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CD896 is a very compact speaker enclosure loaded with one 2-way coaxial transducer plus a second dedicated low-frequency transducer. The coaxial transducer is composed of an 8” (203 mm) LF driver and a 90° x 60° HF horn with 1.7” (43 mm) diaphragm compression driver. The second LF transducer is another 8” driver. Advanced engineering and construction of the complete speaker achieves a space-efficient design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The two 8” LF drivers work together to achieve an increase in overall output and improved mid-bass impact. The coaxial transducer can be rotated in 45° increments to tailor high-frequency coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The LF/HF transducer in the Vector CD896 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 1.7 inch (43 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single neodymium magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, and the use of a single neodymium magnet reduces the speaker’s weight, size, and cost. Dual Low-Frequency Drivers The Vector CD896 employs two mutually-coupled 8” LF transducers to achieve its high efficiency and impactful performance in a relatively small enclosure. Avia™ Digital Signal Processing Every aspect of the Vector CD896 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Versatile Installation The Vector CD896 is particularly effective in applications where compact dimensions and targeted pattern control are desirable. Such applications include front fill, delay fill, under-balcony, small front of house, and foreground music, especially when mated with a subwoofer. Its clean appearance facilitates acceptance by architects and interior designers, and its 25° beveled rear corners allow it to be mounted close to walls or ceilings without obstructing sight lines. Concealed M6 mounting points are included to accommodate either an optional yoke bracket or forged shoulder eyebolts (each sold separately).
-
Loudspeaker - VECTOR-CD1265
|Loudspeaker – Dual 12” Bi-Amplified 3-Way Coaxial 60° x 45° Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CD1265 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer plus a second dedicated low-frequency transducer. The coaxial transducer is composed of a 12” (305 mm) LF driver and a 60° x 45° HF horn with 3” (76 mm) diaphragm compression driver. The second LF transducer is a 12” driver with enhanced low-frequency performance. Advanced engineering and construction of the complete speaker achieves a space-efficient design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The two 12” LF drivers work together in a bi-amplified configuration to achieve an increase in overall output and improved low-frequency pattern control. The coaxial transducer can be rotated in 45° increments to tailor high-frequency coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The LF/HF transducer in the Vector CD1265 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single neodymium magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, and the use of a single neodymium magnet reduces the speaker’s weight, size, and cost. Dual Low-Frequency Drivers The Vector CD1265 employs an innovative and unconventional bi-amplified 3-way configuration using dual 12” LF transducers. Relative to the coaxial transducer, the dedicated LF transducer features increased excursion capability below 100 Hz. The frequency range of both drivers overlaps at precise levels to achieve a flat summed response, producing a higher overall output level compared to a more traditional LF/MF/HF 3-way system. The use of dual LF transducers also provides the benefit of extending usable LF pattern control by over an octave, reducing acoustic reflections in the room for better clarity and “projection.” Avia™ Digital Signal Processing Every aspect of the Vector CD1265 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Two channels of processing are employed to deliver an optimized signal to each transducer. Versatile Installation The Vector CD1265 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate either an optional yoke bracket or forged shoulder eyebolts (each sold separately).
-
Loudspeaker - VECTOR-CD1295
|Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CD1295 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer plus a second dedicated low-frequency transducer. The coaxial transducer is composed of a 12” (305 mm) LF driver and a 90° x 45° HF horn with 3” (76 mm) diaphragm compression driver. The second LF transducer is a 12” driver with enhanced low-frequency performance. Advanced engineering and construction of the complete speaker achieves a space-efficient design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The two 12” LF drivers work together in a bi-amplified configuration to achieve an increase in overall output and improved low-frequency pattern control. The coaxial transducer can be rotated in 45° increments to tailor high-frequency coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The LF/HF transducer in the Vector CD1295 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single neodymium magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, and the use of a single neodymium magnet reduces the speaker’s weight, size, and cost. Dual Low-Frequency Drivers The Vector CD1295 employs an innovative and unconventional bi-amplified 3-way configuration using dual 12” LF transducers. Relative to the coaxial transducer, the dedicated LF transducer features increased excursion capability below 100 Hz. The frequency range of both drivers overlaps at precise levels to achieve a flat summed response, producing a higher overall output level compared to a more traditional LF/MF/HF 3-way system. The use of dual LF transducers also provides the benefit of extending usable LF pattern control by over an octave, reducing acoustic reflections in the room for better clarity and “projection.” Avia™ Digital Signal Processing Every aspect of the Vector CD1295 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Two channels of processing are employed to deliver an optimized signal to each transducer. Versatile Installation The Vector CD1295 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate either an optional yoke bracket or forged shoulder eyebolts (each sold separately).
-
Loudspeaker - VECTOR-CD1565
|Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CD1565 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer plus a second dedicated low-frequency transducer. The coaxial transducer is composed of a 15” (381 mm) LF driver and a 60° x 45° HF horn with 3” (76 mm) diaphragm compression driver. The second LF transducer is a 15” driver with enhanced low-frequency performance. Advanced engineering and construction of the complete speaker achieves a space-efficient design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The two 15” LF drivers work together in a bi-amplified configuration to achieve an increase in overall output and improved low-frequency pattern control. The coaxial transducer can be rotated in 45° increments to tailor high-frequency coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The LF/HF transducer in the Vector CD1565 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single neodymium magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, and the use of a single neodymium magnet reduces the speaker’s weight, size, and cost. Dual Low-Frequency Drivers The Vector CD1565 employs an innovative and unconventional bi-amplified 3-way configuration using dual 15” LF transducers. Relative to the coaxial transducer, the dedicated LF transducer features increased excursion capability below 100 Hz, with a 4” (102 mm) voice coil and powerful ceramic magnet for extra output capacity and higher power handling. The frequency range of both drivers overlaps at precise levels to achieve a flat summed response, producing a higher overall output level compared to a more traditional LF/MF/HF 3-way system. The use of dual LF transducers also provides the benefit of extending usable LF pattern control by over an octave, reducing acoustic reflections in the room for better clarity and “projection.” Avia™ Digital Signal Processing Every aspect of the Vector CD1565 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Two channels of processing are employed to deliver an optimized signal to each transducer. Versatile Installation The Vector CD1565 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate forged shoulder eyebolts (sold separately).[1] Notes: 1. There is no yoke bracket available from Crestron for this model.
-
Loudspeaker - VECTOR-CD1595
|Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CD1595 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer plus a second dedicated low-frequency transducer. The coaxial transducer is composed of a 15” (381 mm) LF driver and a 90° x 45° HF horn with 3” (76 mm) diaphragm compression driver. The second LF transducer is a 15” driver with enhanced low-frequency performance. Advanced engineering and construction of the complete speaker achieves a space-efficient design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The two 15” LF drivers work together in a bi-amplified configuration to achieve an increase in overall output and improved low-frequency pattern control. The coaxial transducer can be rotated in 45° increments to tailor high-frequency coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The LF/HF transducer in the Vector CD1595 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single neodymium magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, and the use of a single neodymium magnet reduces the speaker’s weight, size, and cost. Dual Low-Frequency Drivers The Vector CD1595 employs an innovative and unconventional bi-amplified 3-way configuration using dual 15” LF transducers. Relative to the coaxial transducer, the dedicated LF transducer features increased excursion capability below 100 Hz, with a 4” (102 mm) voice coil and powerful ceramic magnet for extra output capacity and higher power handling. The frequency range of both drivers overlaps at precise levels to achieve a flat summed response, producing a higher overall output level compared to a more traditional LF/MF/HF 3-way system. The use of dual LF transducers also provides the benefit of extending usable LF pattern control by over an octave, reducing acoustic reflections in the room for better clarity and “projection.” Avia™ Digital Signal Processing Every aspect of the Vector CD1595 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Two channels of processing are employed to deliver an optimized signal to each transducer. Versatile Installation The Vector CD1595 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate forged shoulder eyebolts (sold separately).[1] Notes: 1. There is no yoke bracket available from Crestron for this model.
-
Loudspeaker - VECTOR-CS699
|6.5” 2-Way Coaxial 90° x 90° Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CS699 is a very compact speaker enclosure loaded with one 2-way coaxial transducer composed of a 6.5” (165 mm) LF driver and a 90° x 90° HF horn with 1” (25 mm) diaphragm compression driver. Advanced engineering and construction of the complete speaker achieves a highly space-efficient design with unusually high output capability and consistent off-axis response. Its coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality. High-Performance Coaxial Transducer The coaxial transducer in the Vector CS699 features a true high-frequency horn and compression driver married to a powerful 6.5” woofer, affording high efficiency and exceptional clarity for both speech and program material. Its broad 90° x 90° coverage pattern works well in small spaces and short-throw applications. Tight integration between the compression driver diaphragm and woofer voice coil achieves coherent summation in the crossover region, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. Avia™ Digital Signal Processing Every aspect of the Vector CS699 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Versatile Installation The Vector CS699 is particularly effective in applications where compact dimensions and targeted pattern control are desirable. Such applications include front fill, delay fill, under-balcony, control room, and background music, especially when mated with a subwoofer. Its clean appearance facilitates acceptance by architects and interior designers, and its diminutive size allows it to be mounted close to walls or ceilings without obstructing sight lines. Concealed M6 mounting points are included to accommodate either an optional yoke bracket (sold separately) or third-party pan/tilt type speaker mount.
-
Loudspeaker - VECTOR-CS1265
|Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CS1265 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer composed of a 12” (305 mm) LF driver and a 60° x 45° HF horn with 3” (76 mm) diaphragm compression driver. Advanced engineering and construction achieve a space-efficient speaker design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The transducer can be rotated in 45° increments to tailor coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The transducer in the Vector CS1265 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single, powerful ceramic magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, resulting in performance rivaling a more expensive bi-amplified design. Using a single magnet also reduces the speaker’s weight, size, and cost. Avia™ Digital Signal Processing Every aspect of the Vector CS1265 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Versatile Installation The Vector CS1265 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate either an optional yoke bracket or forged shoulder eyebolts (each sold separately).
-
Loudspeaker - VECTOR-CS1295
|Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CS1295 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer composed of a 12” (305 mm) LF driver and a 90° x 45° HF horn with 3” (76 mm) diaphragm compression driver. Advanced engineering and construction achieve a space-efficient speaker design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The transducer can be rotated in 45° increments to tailor coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The transducer in the Vector CS1295 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single, powerful ceramic magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, resulting in performance rivaling a more expensive bi-amplified design. Using a single magnet also reduces the speaker’s weight, size, and cost. Avia™ Digital Signal Processing Every aspect of the Vector CS1295 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Versatile Installation The Vector CS1295 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate either an optional yoke bracket or forged shoulder eyebolts (each sold separately).
-
Loudspeaker - VECTOR-CS1565
|Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CS1565 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer composed of a 15” (381 mm) LF driver and a 60° x 45° HF horn with 3” (76 mm) diaphragm compression driver. Advanced engineering and construction achieve a space-efficient speaker design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The transducer can be rotated in 45° increments to tailor coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The transducer in the Vector CS1565 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single, powerful ceramic magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, resulting in performance rivaling a more expensive bi-amplified design. Using a single magnet also reduces the speaker’s weight, size, and cost. Avia™ Digital Signal Processing Every aspect of the Vector CS1565 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Versatile Installation The Vector CS1565 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate either an optional yoke bracket or forged shoulder eyebolts (each sold separately).
-
Loudspeaker - VECTOR-CS1595
|Loudspeaker – 15” 2-Way Coaxial 90° x 45° Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CS1595 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer composed of a 15” (381 mm) LF driver and a 90° x 45° HF horn with 3” (76 mm) diaphragm compression driver. Advanced engineering and construction achieve a space-efficient speaker design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The transducer can be rotated in 45° increments to tailor coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The transducer in the Vector CS1595 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single, powerful ceramic magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, resulting in performance rivaling a more expensive bi-amplified design. Using a single magnet also reduces the speaker’s weight, size, and cost. Avia™ Digital Signal Processing Every aspect of the Vector CS1595 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Versatile Installation The Vector CS1595 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate either an optional yoke bracket or forged shoulder eyebolts (each sold separately).
-
Touch Screen User Interface - TS-1542
|Advanced Touch Screen Control A Crestron® touch screen offers an ideal user-interface for controlling all the technology in your home, boardroom, classroom, courtroom, or command center. Touch screens simplify and enhance the way you use technology, doing away with those piles of remote controls, cluttered wall switches, disparate smartphone apps, and cryptic computer screens. For controlling audio, video, lighting, shades, HVAC, security, and other systems, Crestron touch screens are fully-customizable with easy-to-use controls and icons, true feedback and real-time status display, full-motion video windows, and a full-featured media player for an enhanced multiroom entertainment experience. The Crestron TS-1542 delivers the ultimate touch screen experience — blending style and function with advanced high-definition graphics. In one slim device, the TS-1542 integrates a brilliant 15.6” Full HD touch screen display and high-performance digital graphics engine. Its sleek, modern design features premium metallic construction and edge-to-edge glass for a contemporary look that’s perfectly at home placed on an executive boardroom table, installed in a high-tech command center, or mounted on the wall in a luxury residence. Featuring enhanced Smart Graphics™ performance and dual-window HD streaming video display, the TS-1542 delivers an elegant and powerful touch screen control solution for a wide range of applications. Additional features include the abilities to control any function using voice commands, browse the Internet, annotate over a video image or whiteboard screen, and communicate using built-in VoIP intercom and phone functions.[1] Single-wire PoE+ connectivity and a choice of tabletop, wall, or VESA mounting options afford an integrator-friendly solution that’s easy to install and fits perfectly in any space. Standard finishes include either white or dark gray metallic, or choose the Signature Series option to design your own custom finish. Sleek, Versatile Design At just 1-3/4 inches (45 mm) deep, the TS-1542 can be mounted virtually anywhere using the supplied wall mount kit or a third-party VESA 100 compliant mounting arm, bracket, or stand. A tabletop tilt model (TS-1542-TILT) is also offered, which features an ultra-stylish, smooth-tilt base for use on a table, desk, podium, or countertop. TS-1542 Signature Series The Signature Series allows the TS-1542 to be transformed into a beautiful showpiece adorned with custom colors and graphics on the tilt base and rear of the touch screen. No design is off limits, as Crestron provides the means for design ideas to be submitted, rendered for approval, and then made real. For more information, please visit: www.crestron.com/signatureseries. Smart Graphics™ Crestron touch screens use Smart Graphics to deliver the ultimate user experience and the ultimate value by enabling the creation of dynamically rich user interfaces with incredible efficiency and unparalleled functionality. Using Smart Graphics, programmers can swiftly integrate fluid gesture-driven controls, animated feedback, rich metadata, embedded apps and widgets, and full-motion video for a deeply engaging and ultra-intuitive touch screen experience. Crestron Smart Graphics offers these enhancements and more: Cool-looking graphical buttons, sliders, knobs, and gauges that are intuitive and fun to use Kinetic effects to enhance the feeling of realism, with lists and toolbars that scroll with momentum at the flick of a fingertip Drag-and-drop objects that snap into place, offering an easy way to switch sources Dashboard widgets to personalize the touch screen with clocks, weather, news, and other information [1] A power-saving screensaver that can display the time, temperature, and other text content at a reduced brightness level Customizable themes allowing a completely different look and feel for every user, event, or season Fully-developed SmartObjects® that enable sophisticated control over complex devices with minimal programming A consistent look and feel across multiple touch screens of varying sizes Auto-Brightness Control The TS-1542 maintains optimal visibility under varying lighting conditions by automatically adjusting its display brightness according to changes in the ambient light level in the room. HD Streaming Video High-definition streaming video capability makes it possible to view security cameras and other video sources right on the touch screen. Up to two video windows can be displayed simultaneously. Native support for H.264 and MJPEG formats allows the TS-1542 to display live streaming video from IP cameras, streaming encoders (Crestron CEN-NVS200, DM-TXRX-100-STR, or similar [2]), and DigitalMedia™ switchers. Video is delivered to the touch screen over Ethernet, eliminating the need for any extra video wiring. Voice Recognition Some things are easier said than done, so why not just say what you want and let Crestron do it for you? With built-in voice recognition, the TS-1542 provides the ability to use spoken commands to control virtually anything. Voice recognition can be used to quickly turn devices on or off, select and play a specific media title or playlist, change the channel, choose a lighting scene, lock the doors, arm the security system, or enter a password. Simply say a command and Crestron does the rest.[1] Rava® SIP Intercom Rava SIP Intercom Technology enables hands-free VoIP communication with other Rava-enabled touch screens and door stations. Rava works over Ethernet, supporting 2-way intercom, video intercom [3], and paging without requiring any special wiring. VoIP phone capability is also possible through integration with a SIP-compatible IP phone system or SIP server, allowing hands-free telephone functionality complete with speed-dialing, caller ID, custom ringers, and other enhancements. Built-in echo cancellation affords full-duplex performance for clear, seamless voice communication. Speakers and Microphone The built-in speakers and microphone provide clear audio for intercom and phone calls, as well as for listening to multimedia. Audio Feedback Customized audio files can be loaded to add another dimension to the touch screen graphics using personalized sounds, button feedback, and voice prompts. Web Browsing Using its built-in web browser, the TS-1542 provides quick access to online program guides and other web-based services at the touch of a button, allowing enhanced touch screen control of DVRs and other appliances without having to pick up a separate tablet or smartphone. If a device can be controlled or managed through a web browser, it can be integrated into the Crestron system through the TS-1542. Of course, the web browser may also be used to simply browse the Internet, watch online videos, and check up on social media.[1] Multi-Touch Support The TS-1542’s capacitive touch screen affords enhanced capabilities for browsing web pages using multi-touch gestures. Keyboard Options Typing in passwords, URLs, and text searches is facilitated using the on-screen multi-language keyboard. A physical USB keyboard (not included) may also be connected. Built-in Annotation Whether conducting a high-level boardroom meeting or training seminar, sharing ideas in a huddle space, or watching sports in your home theater, annotation helps put the fine point on any presentation. Annotation provides the ability to illustrate your thoughts on-the-fly, letting you draw and write over streaming video and computer images, and sketch out ideas on a whiteboard screen. Native to the TS-1542, remote annotation capability allows multiple participants, each with a separate touch screen, to draw with their fingertips over the same video image or whiteboard, enabling enhanced collaboration in a classroom, courtroom, or council chamber. Adding a Crestron Digital Graphics Engine (model DGE-100 [2]) connected to the room’s main display allows the whole annotation session to be viewed by the entire audience. Single-Wire Connectivity A simple Ethernet LAN connection with PoE+ is all that is required to wire the TS-1542, containing all control, video, intercom, and power signals within a single wire. If the LAN does not support PoE+, the TS-1542 may be powered using the supplied 100-240V power pack or 24VDC Cresnet® power.[4] Power over Ethernet Using PoE+ technology, the TS-1542 can get its operating power right through the LAN wiring. PoE (Power over Ethernet) eliminates the need for a local power supply or any dedicated power wiring. To supply PoE+ to a network of TS-1542 touch screens and other devices, Crestron offers the CEN-SWPOE-16 16-Port Managed PoE Switch.[2] Interface Module Each TS-1542 ships with a compact interface module (TS-1542-IMCW), which may be used as required to provide an RJ45 LAN connection for the touch screen. The module can be mounted in a 1-gang electrical box or floor box, under a table, or in a podium or equipment rack. A 6 foot (1.8 meter) long LAN cable is included for connection between the module and touch screen. NOTE: When surface mounted using the wall mount kit (included with models TS-1542-B-S and TS-1542-W-S only), all wiring enters through an electrical box or cut-out and is concealed from view. For this method of installation, the interface module may not be required. Notes: 1. Voice recognition, web browsing, weather information, and certain other functions require an Internet connection. 2. Item(s) sold separately. 3. H.264 compatible IP camera required. 4. Connection to a Cresnet network or power supply is for power only. Does not support Cresnet data communications. 5. Supports up to two simultaneous streaming inputs with a maximum combined total bitrate of 25 Mbps.
-
Partition Sensor - GLS-PART-CN
|The GLS-PART-CN is a sleek, surface-mount partition sensor that utilizes the dependable Cresnet® wired network for power and communications. Designed with hospitality environments in mind, this easily installed sensor uses an infrared (IR) beam to sense the position of movable partitions within a space. The IR beam’s signal strength is adjustable and features a sensing distance of up to four feet, making the GLS-PART-CN a versatile partition sensor with optimized sensing accuracy. Three LEDs on the unit provide at-a-glance information on the sensor’s state of power, communications, and partition detection. The GLS-PART-CN offers mounting options for rooms with finished or droptile ceilings. The GLS-PART-CN has plug-in outputs and built-in time delays. Also, the partition sensor easily connects via Cresnet® to a Crestron control processor to manage divisible room environments. Cresnet The GLS-PART-CN uses the dependable Cresnet wired network for communication between devices. Cresnet provides a simple solution for configuring and wiring sensors as part of any complete Crestron system. Cresnet is the communications backbone for Crestron lighting dimmers, keypads, shades, thermostats, and many other devices. This flexible 4-wire bus provides data communications and 24 Volts DC power for all of the devices on the Cresnet network. Versatile Installation The GLS-PART-CN has a white finish and can mount directly into finished ceilings. For droptile ceilings, the GLS-PART-CN installs into a 1-gang, 3-1/2 inch deep electrical box. In both instances, a decorator-style faceplate[1] can be used to match the GLS-PART-CN with the color of the room. Only about 20 mm of the GLS-PART-CN is visible after installation, making it an unobtrusive addition to a room. Digital Output This sleek sensor delivers unparalleled versatility through an additional output on the terminal block, which can be used as an alternate method of integration with a Crestron Control System® or other system. The 5th pin of the Cresnet connector provides either a 24 Volt, 10 mA output or a closure to ground, perfect for connection with a Versiport or digital input port. Notes: 1. Sold separately.
-
Wireless Touch Screen - TST-902
|The Crestron® TST-902 Wireless Touch Screen is an advanced wireless controller, engineered to deliver ultimate performance, reliability, and customizability for controlling a wide range of technologies in a corporate, government, classroom, or high-end home environment. Its thin, tablet-style design is easy to hold and moves effortlessly between portable and stationary tabletop or in-wall use.[1] Its large-capacity rechargeable battery affords several hours or days of operation between charges. Dual-mode wireless performance with roaming capability assures dependable connectivity throughout a commercial facility or luxury residence. Featuring a high-contrast 8.7” capacitive touch screen with Smart Graphics®, the TST-902 allows completely customizable control over media presentation and teleconferencing systems, lighting and shades, HVAC and BMS, home theater, and a host of other technologies. Additional advanced features include the abilities to control any function using voice commands, view full-motion streaming video from cameras and other sources, and browse the Internet.[2,3] Smart Graphics® Crestron touch screens use Smart Graphics to deliver the ultimate user experience and the ultimate value by enabling the creation of dynamically rich user interfaces with incredible efficiency and unparalleled functionality. Using Smart Graphics, programmers can swiftly integrate fluid gesture-driven controls, animated feedback, rich metadata, embedded apps and widgets, and full-motion video for a deeply engaging and ultra-intuitive touch screen experience. Crestron Smart Graphics offers these enhancements and more: Cool-looking graphical buttons, sliders, knobs, and gauges that are intuitive and fun to use Kinetic effects to enhance the feeling of realism, with lists and toolbars that scroll with momentum at the flick of a fingertip Drag-and-drop objects that snap into place, offering an easy way to switch sources Dashboard widgets to personalize the touch screen with clocks, weather, news, and other information [2] A power-saving screensaver, allowing display of time, temperature, and other text content at a reduced brightness level Customizable themes allowing a completely different look and feel for every user, event, or season Fully-developed SmartObjects® that enable sophisticated control over complex devices with minimal programming A consistent look and feel across multiple touch screens of varying sizes Voice Recognition Some things are easier said than done, so why not just say what you want and let Crestron do it for you? With built-in voice recognition, the TST-902 provides the ability to use spoken commands to control virtually anything. Voice recognition can be used to quickly turn devices on or off, choose a lighting scene, select and play a specific media title or playlist, initiate a conference call, or enter a password. Simply say a command and Crestron does the rest.[2,3] Streaming Video High-performance streaming video capability makes it possible to view security cameras and other video sources right on the touch screen. Native support for H.264 and MJPEG formats allows the TST-902 to display live streaming video from an IP camera, a streaming encoder (Crestron CEN-NVS200, DM-TXRX-100-STR, or similar [4]), or a DigitalMedia™ switcher.[3] Web Browsing Using its built-in web browser, the TST-902 provides quick access to online program guides and other web-based services at the touch of a button, allowing enhanced touch screen control of DVRs and other appliances without having to pick up a separate tablet or smartphone. If a device can be controlled or managed through a web browser, it can be integrated into the Crestron system through the TST-902. Of course, the web browser may also be used to simply browse the Internet, watch online videos, and check up on social media.[2,3] Multi-Touch Support The TST-902’s capacitive touch screen affords enhanced capabilities for browsing web pages using multi-touch gestures. On-Screen Keyboard An on-screen multi-language keyboard allows for quick entry of passwords, URLs, and text searches. Audio Feedback Customized audio files can be loaded on the TST-902 to add another dimension to the touch screen graphics using personalized sounds, button feedback, and voice prompts. Dual-Mode Wireless To deliver the ultimate in wireless touch screen performance and functionality, the TST-902 employs a combination of Crestron Extended Range 2.4 GHz RF (ER) and Wi-Fi® wireless technologies. Extended Range RF (Required) — Primary functionality is supported via Crestron ER (Extended Range) wireless communications, providing seamless touch screen control with true feedback. A single ER gateway [4] enables ultra dependable wireless performance at a range of up to 200 feet (60 m) indoors.[5] Roaming capability allows for even greater coverage using up to eight ER gateways. Wi-Fi (Optional) — While the TST-902 can be operated using only ER wireless, advanced wireless capabilities such as streaming video, voice recognition, web browsing, and dynamic graphics can only be supported using both ER and Wi-Fi together (dual-mode). Crestron enhanced Wi-Fi wireless performance achieves a remarkable 50 feet (15 m) omnidirectional coverage indoors.[5] For Wi-Fi networks with multiple access points, the TST-902 supports the ability to hand off communication from one access point to another if the active connection is lost.[6] The choice of 802.11 b, g, and n protocols affords reliable, high-speed wireless performance in virtually any RF environment. For optimal Wi-Fi performance, Crestron offers the CEN-WAP-1500 High Power Dual-Band Wireless Access Point [4]. IMPORTANT: EVERY INSTALLATION OF THE TST-902 REQUIRES A CRESTRON ER WIRELESS GATEWAY TO ENABLE ESSENTIAL WIRELESS CAPABILITY. THE TST-902 WILL NOT WORK WITH WI-FI ALONE.[7] Instant-Waking® To ensure the most transparent user experience possible, the TST-902 has been engineered to wake instantly upon touching the touch screen. Commands are sent immediately — just like an IR remote but with none of IR’s limitations. So spontaneous actions like muting the audio, pausing the video, or changing the channel can be executed on-the-fly without any waiting. Extended Battery Life The TST-902 features a large-capacity, user-replaceable Li-Ion battery pack to enable up to 9 hours of continuous operation and several days of typical use between charges. Intelligent power management and Lithium Ion battery technology afford a perfect balance of long battery life, light weight, and compact size. Table Dock Charger The TST-902 includes a stylish table dock for charging its internal battery while simultaneously allowing it to be used as a stationary tabletop touch screen. The table dock holds the TST-902 firmly at a fixed upright angle while docked, and allows it to be simply lifted off at any time for portable use. Its sleek appearance achieves a look befitting the most contemporary boardroom or luxury living room.[1] Wall Dock Option Available separately, the TST-902-DSW provides a flush mount, in-wall docking solution, allowing the TST-902 to be used as a stationary wall mount touch screen with the ability to go wireless at any time. Notes: 1. The TST-902 ships with (1) TST-902-DS Table Dock included. Additional table docks, or the TST-902-DSW wall dock, may be ordered separately. Refer to the TST-902-DS and TST-902-DSW spec sheets for additional information. 2. Voice recognition, web browsing, weather information, and certain other functions require an Internet connection via Wi-Fi. 3. Voice recognition, streaming video, web browsing, and dynamic graphics capabilities require dual-mode wireless (ER + Wi-Fi). 4. Item(s) sold separately. 5. Wireless range subject to site-specific conditions. 6. True roaming is supported for ER wireless communication only, affording uninterrupted wireless performance for primary touch screen functions. Wi-Fi “handoff” capability enables automatic handoff amongst up to four pre-designated Wi-Fi wireless access points, wherein the last successful Wi-Fi connection is maintained indefinitely until that connection is lost, at which point communication is handed off to the next nearest access point. A very brief interruption to wireless Ethernet communication may occur during the handoff. Primary ER wireless communication is unaffected by the Wi-Fi handoff process. 7. ER (Extended Range) RF wireless communication supports basic wireless touch screen functionality, and is required for all applications. For advanced functionality including streaming video, voice recognition, web browsing, and dynamic graphics, Wi-Fi wireless communication is also required (dual-mode). The TST-902 will not work with Wi-Fi alone.
-
Digital Graphics Engine - DM-DGE-200-C
|The DM-DGE-200-C Digital Graphics Engine transforms an HD or Ultra HD touch screen display into an advanced Crestron® controller. Featuring Crestron Smart Graphics™ technology, the DM-DGE-200-C provides for the creation of a completely custom graphical environment combining advanced controls for audio & video, lighting, shades, HVAC, security, and other functions with dual-window video display, annotation, audio feedback, and web browsing. Its low-profile, surface-mountable design allows for a discreet installation behind a flat-panel display, under a table, or inside a lectern or equipment rack. Alternately, the DM-DGE-200-C offers an enhanced presentation and productivity solution for meeting rooms and huddle spaces using Crestron PinPoint™ UX technology. Without requiring a touch screen or any other controls or programming, PinPoint UX leverages the room’s display to create an intelligent meeting space seamlessly integrated as part of a complete Crestron Fusion® Cloud managed enterprise. The DM-DGE-200-C features a 4K UHD capable HDMI® output for connection to the display device, and includes a USB HID port for touch, mouse, and/or keyboard input. Additional control ports are provided to enable control of the display device and other equipment.[1,2] A single HDMI input allows an AirMedia® wireless presentation gateway or other high-definition video source to be connected and displayed on screen. A DM 8G+® input is included to support 4K UHD and DCI 4K sources connected at a DM® transmitter or switcher.[3] Additionally, H.264 streaming video signals can be received over a high-speed Ethernet connection.[4] Ethernet also provides the interface to a Crestron control system, which is required for touch screen and OSM control applications.[5] PinPoint™ UX The DM-DGE-200-C takes any meeting room or huddle space display device to a higher level, enhancing its usability while eliminating the need for any other AV or control equipment in the room. Built-in PinPoint UX technology works with Crestron Fusion Cloud and the PinPoint app to provide an intelligent meeting space that greets attendees with useful on-screen information and facilitates BYOD presentation without the need for a touch screen, button panel, or remote. As attendees enter the room, the personalized welcome screen provides essential details about the current scheduled meeting along with simple instructions to guide presenters through connecting their mobile devices and starting the presentation. As the meeting progresses, gentle notifications appear periodically to indicate how much time is left in the meeting and what’s scheduled next for the room. Pop-up messages may also appear prominently on screen, sent from Fusion, in the event of an emergency or other important announcement. With PinPoint UX, system operation is essentially invisible. Simply connecting a laptop, tablet, or other presentation source causes the video inputs to switch and the display to turn on (if not already on). Sources can be connected via a wired interface or wirelessly via Crestron AirMedia.[6] The display can also be scheduled to turn on and off at set times. The status of the display and any connected devices is reported to Fusion to enable monitoring and logging of equipment usage, and notification if a device is powered off or disconnected. Complete setup and configuration of PinPoint UX is performed through a simple web browser interface or through Fusion, with the ability to configure many PinPoint UX devices at once over the network. Note: PinPoint UX may be used without Crestron Fusion Cloud to provide a simple standalone meeting room presentation solution with customizable welcome screen and automatic operation. PinPoint UX also supports direct integration with Microsoft® Exchange Server. Touch Screen Interface For traditional touch screen control applications, the DM-DGE-200-C pairs perfectly with a Crestron TSD-2220 HD Touch Screen Display to deliver a high-definition 21.5” touch screen control panel that’s ideal for home automation, corporate multimedia presentation, and command center applications. Third-party touch screens of varying sizes can be used with the DM-DGE-200-C to fulfill a range of control, collaboration, video display, and interactive kiosk solutions. The DM-DGE-200-C currently supports either Full HD 1080p60 (1920x1080@60Hz) or 4K UHD (3840x2160@30Hz) display resolutions. OSM Interface On-screen menu (OSM) capability offers an alternative to touch screen control, enabling a fully-customizable control menu to appear on any TV or video display, with simple navigation provided using the same Crestron handheld remote that’s controlling the TV. A USB mouse may also be used. The DM-DGE-200-C delivers stunning menu graphics that pop up unobtrusively at the edge of the screen alongside the video image, letting you quickly adjust lighting and climate control settings, lower the shades, check security system status, and lock or unlock the front door without interrupting the movie or TV program you’re watching. Detailed alert messages can also appear on screen in case of a security alarm, doorbell, or other event. You can even pop up a live streaming camera window to see who’s at the door or coming up the driveway. Smart Graphics™ The DM-DGE-200-C uses Smart Graphics to deliver the ultimate user experience and the ultimate value by enabling the creation of dynamically rich user interfaces with incredible efficiency and unparalleled functionality. Using Smart Graphics, programmers can swiftly integrate fluid gesture-driven controls, animated feedback, rich metadata, embedded apps and widgets, and full-motion video for a deeply engaging and ultra-intuitive touch screen experience. Crestron Smart Graphics offers these enhancements and more: Cool-looking graphical buttons, sliders, knobs, and gauges that are intuitive and fun to use Kinetic effects to enhance the feeling of realism, with lists and toolbars that scroll with momentum at the flick of a fingertip Drag-and-drop objects that snap into place, offering an easy way to switch sources Dashboard widgets to personalize the touch screen with clocks, weather, news, and other information [7] A power-saving screensaver that can display the time, temperature, and other text content at a reduced brightness level Customizable themes allowing a completely different look and feel for every user, event, or season Fully-developed SmartObjects® that enable sophisticated control over complex devices with minimal programming A consistent look and feel across touch screens of varying sizes Notes: 1. When using the PinPoint UX application without a control system, the onboard RS-232 COM port supports basic on/off power control of a single display device and the IR port is not utilized. The COM and IR ports may all be utilized for fully-customizable control applications through integration with a Crestron control system with custom programming. 2. When using the PinPoint UX application without a control system, CEC may be utilized at the HDMI output to provide basic on/off power control of a single display device. CEC may be utilized through either HDMI port for fully-customizable control applications through integration with a Crestron control system with custom programming. 3. When using the PinPoint UX application without a control system, if a DM 8G+ transmitter is connected, the transmitter’s input switching capability is limited to auto-switching mode and any control ports on the transmitter are disabled. Manual switching and control port functionality on the transmitter require a control system with custom programming. Control port functionality is not supported at all on a DM-TX-4K-100-C-1G transmitter. 4. Supports up to two simultaneous streaming video inputs with a maximum combined total bitrate of 25 Mbps. Streaming video input is not supported using the PinPoint UX application unless connected to a Crestron control system with custom programming. 5. When connected to a DM switcher via DM 8G+, the DM-DGE-200-C can obtain its LAN connection through the switcher but does not receive an IP address on the switcher’s private network. Thus, it requires an IP address on the customer’s LAN. 6. AirMedia wireless presentation support requires a wireless LAN and the addition of an AirMedia presentation gateway, model AM-101, sold separately. 7. Web browsing, weather information, and certain other functions require an Internet connection. 8. The maximum cable length for DigitalMedia 8G+ (DM 8G+) is dependent upon the type of cable, resolution of the video signal, and capabilities of each connected device. Refer to the “DM 8G+ Maximum Cable Lengths” table for a detailed overview. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for DM system design guidelines. All wire, cables, transmitters, and other devices are sold separately. 9. The audio signal from any source connected to the HDMI or DM input is passed through to the HDMI output without processing, downmixing, volume control, or mute control. 10. The HDMI video input signal cannot be downscaled by more than 4x. For instance, a 1920x1080 source signal can be displayed no smaller than 480x270 pixels. 11. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.