Expanded Polystyrene Texture

<p><b>Greenguard Gold Certified, BASF Neopor® GPS</b> is a graphite polystyrene (GPS) rigid foam insulation that gives maximum efficiency, cost-effectiveness and sustainability on construction projects. It's unique silver-gray color and exceptional insulation characteristics are a result of high-purity graphite that reflects and absorbs radiant energy, decreasing the materials thermal conductivity and increasing its R-value.<br></p><p>This object delivers both stand-alone Neopor® insulation as well as two NFPA 285 Wall Assemblies containing Neopor® as the exterior insulation.  One option with brick cladding and the other with stucco.  Additional cladding and material options can be viewed in our NFPA 285 Technical Bulletin.</p>

External thermal insulation composite system with rendering (ETICS) intended to be used on external walls made of concrete or masonry, for new or existing buildings. PARISO PSE - M is composed of a thin mineral base coat reinforced with a glass fibre mesh and applied onto expanded polystyrene panels (white or grey) bonded or mechanically-fixed with anchors to the substrate. Various finishing coats are associated to the system: - Thick mineral rendering - Thin mineral renderings - Silicate renderings - Marble aggregates - burnt clay facing bricks - FR containing-organic renderings - FR containing-organic and siloxane rendering

Basic is the primary external wall insulation system in the range. Incorporating expanded polystyrene insulation, it is a high performance, fully acrylic or mineral based thin coat rendered facade system. It is ideal for the refurbishment of solid wall constructions, providing an easy to apply solution to effectively insulate the building.

Pro Mineralic is the primary external wall insulation system in the range. Incorporating expanded polystyrene insulation, it is a high performance, fully acrylic or mineral based thin coat rendered facade system. It is ideal for the refurbishment of solid wall constructions, providing an easy to apply solution to effectively insulate the building.

External thermal insulation composite system with rendering (ETICS) intended to be used on external walls made of concrete or masonry, for new or existing buildings. PARISO PSE - M is composed of a thin mineral base coat reinforced with a glass fibre mesh and applied onto expanded polystyrene panels (white or grey) bonded or mechanically-fixed with anchors to the substrate. Various finishing coats are associated to the system: - Thick mineral rendering - Thin mineral renderings - Silicate renderings - Marble aggregates - burnt clay facing bricks - FR containing-organic renderings - FR containing-organic and siloxane rendering

Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched.

Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: [LIST] Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched. [/LIST]

Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: [LIST] Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched. [/LIST]

Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: [LIST] Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched. [/LIST]

Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: [LIST] Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched. [/LIST]

Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: [LIST] Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched. [/LIST]

<p>RHEATHERM 600 is an External Thermal Insulation Composite System (ETICS) developped by Vicat Produits Industriels (VPI) which is made of a thin hydraulic undercoat containing fibres, reinforced with glass fibres meshes, and applied directly to the insulating panels of expanded polystyrene (white or graphite), bonded or mechanically fixed with anchors or by profile on the wall (concrete or masonry, new or existing walls). RHEATHERM 600 is consistent with the fire regulation by installing rockwool bands. Fit for all kinds of buildings (public-access building, collective dwelling, etc.). </p> <p>Finishing is ensured by: <br>- a coating based on organic resin (CRÉPILOR), siloxane (LITHOCOLOR) or organo-siloxane (CRÉPILANE) available in 680 colors <br>- an acrylic binder paint (FLEXODERM) available in 680 colors,<br> - a thick mineral coating based on lime (RÉNOPASS CHAUX GF / GM, RHÉAJET) available in 59 colors.</p>

The ideal option for high thermal performance that combines reduced thickness and easy installation. Features a special graphite panel with white surface — obtained through a unique lamination synthesis process — that ensures truly uniform thermal properties by combining the performance of graphite with the simplicity and easy installation of conventional white polystyrene. COMPARED TO TRADITIONAL EPS SOLUTIONS, WITH THE SAME THICKNESS APPLIED AND TYPE OF SUPPORT, IT INCREASES OF 19% PERFORMANCE INSULATION thanks to the innovative HP panel (High Performance) combined with state-of-the-art adhesive-skim coat (Klebocem Termico) with thermal conductivity value λ = 0.23W/mK that ensures insulating performance four times greater than a standard adhesive-skim coat (λ = 0.85W/mK).

THERMANO THERMAL PIR INSULATION BOARDS FEATURES: [LIST] solid floors for many years, without cracks and dampness heating bills lower by up to 40%! (depending on the type of floor) easy and weldless insulation of standard and critical places, on virtually every surface, at temperatures from -70°C to +140°C unparalleled energy efficiency the best insulator in the market! eliminates thermal bridges, the so-called dew point problem and vapour condensation; more efficient in comparison to polystyrene XPS and EPS stable thermal insulation parameters throughout full lifetime absorbability <2% thanks to closed cell structure easy and fast assembly less material and lower workmanship costs safe for the natural environment [/LIST]

THERMANO THERMAL PIR INSULATION BOARDS FOR FLAT ROOFS FEATURES: [LIST] easy and weldless insulation of standard and critical places, on virtually every surface, at temperatures from -70°C to +140°C unparalleled energy efficiency – the best insulator in the market! - eliminates thermal bridges, the so-called dew point problem and vapour condensation; more efficient in comparison to polystyrene and wool easy and incredibly fast assembly - less material, fast joining of the plates, stability of the surface, easy to handle and assemble in all kinds of conditions a durable product, resistant to deterioration, resistant to most solvents commonly used in building industry stable thermal insulation parameters throughout full lifetime safe for the natural environment and pro-ecological (according to Bio-Bauforschung IBBF Institute) [/LIST]

KNAUF Therm ETIXX façade λ 31 polystyrene panels are designated by the following code according to PN-EN standard EN 13163:2012+A1:2015 EPS EN 13163 T(2)-L(2)-W(2)-S(5)-P(5)-BS100-DS(N)5-DS(70,-)2-TR100 KNAUF Therm ETIXX façade λ 31 polystyrene panels are pressed from expanded polystyrene with an enrichening additive. The enriched composition of graphite added to polystyrene improves insulating properties, thanks to which better thermal insulation effects are achieved at lower panel thicknesses. The panels have straight edges. PURPOSE • exterior thermal insulation made using the ETICS (“light wet” = BSO) method • exterior thermal insulation made using the "light dry" method • Thermal insulation on skeleton wall surface • thermal insulation in closed gap of tri-layer wall • thermal insulation in ventilated gap of tri-layer wall • thermal insulation of balcony loggias • thermal insulation of tie beams, window reveals and lintels PRIMARY ADVANTAGES OF KNAUF Therm ETIXX facade λ 31 Approx. 30% lower panel thickness in comparison to ordinary polystyrene (possibility of using panel on balconies and loggias without significant losses of residential areas) • greater or equal thermal insulating power of panels at lower thickness in comparison to ordinary polystyrene panels • manufactured from foamed polystyrene enriched with graphite particles for excellent insulating parameters (low thermal conductivity λ = 0.031W/mK) • the pressing technology ensures high dimensional stability => the panel has straight edges and a flat surface • large panel dimensions: 1200 x 600 mm – 20% greater than the dimensions of a standard polystyrene panel

<p>KNAUF Therm EXPERT FLOOR HEATING 200 λ 33 expanded polystyrene panels are marked with the following code, according to PN-EN 13163:2012 + A1:2015 standard: </p> <p>EPS-EN 13163-T(1)-L(2)-W(2)-S(2)-P(5)-BS250-CS(10)200-DS(N)2-DS(70,-)1-DLT(1)5 </p> <p>KNAUF Therm EXPERT FLOOR HEATING 200 λ 33 (EPS 200) insulation panels are manufactured in the form of finished goods in the innovative shape moulding technology. Owing to innovative production process they feature excellent insulation characteristics and very good working properties. They are intended for use as a broadly defined floor thermal insulation in water underfloor heating systems. </p> <p> <strong>APPLICATION</strong></p> <p>KNAUF Therm EXPERT FLOOR HEATING 200 λ 33 panels are intended for use as floor thermal insulation and for installation of heating pipes in water underfloor heating systems. They are designed for quick and easy installation of the pipes. Panels are made of dense expanded polystyrene and are therefore not susceptible to moisture absorption. Because of their versatility they may be applied in housing construction and public utility facilities. </p> <ul><li>The system of protrusions allows for a quick and easy installation of heating pipes.<br>The shape of protrusions ensures stability of heating pipes after they have been laid, without the necessity of using any additional materials to hold them in place. </li><li>Protrusions that hold the heating pipes in place. </li><li>Innovative edge profiles allow for tight and durable connection of the panels.</li><li>High thermal resistance (λD thermal conductivity = 0,033 W/(mK) – excellent thermal insulating power</li></ul> <p></p> <p><strong>INSTALLATION GUIDE FOR KNAUF Therm EXPERT FLOOR HEATING 200 λ 33 PANELS</strong></p> <p>Steps of laying water underfloor heating system with KNAUF Therm FLOOR HEATING 200 λ 33 panels </p> <p>Steps of laying the water underfloor heating system depend on the location of the room in which it is going to be installed.</p> <p>1. Applying the so called additional insulation (if the underfloor heating is installed on soil or over an unheated room) – KNAUF Therm expanded polystyrene panels (KNAUF Therm TECH Dach/Podłoga λ 37, KNAUF Therm PRO Dach/Podłoga EPS 100 λ 36, KNAUF Therm PRO Parking EPS 200 λ 33) <br>2. Gluing in the edge strips at the walls and pillars (if the latter are present in the room that the water underfloor heating is installed in)<br>3. Laying down the KNAUF Therm EXPERT FLOOR HEATING 200 λ 33 professional panels intended for water underfloor heating.<br>4. Laying the heating pipes on the KNAUF Therm EXPERT FLOOR HEATING 200 λ 33 panel<br>(without the necessity of using any other materials to hold the heating pipes in place)<br>5. Priming the heating pipes with water.<br>6. Making the so called heating slab.<br>7. Covering the pipes with anhydrite or cement screed (it can be KNAUF FE 50 cement screed) – up to the height of “protrusions” on the KNAUF Therm EXPERT FLOOR HEATING 200 λ 33 panel.<br>8. Releasing air bubbles from the screed – the heating pipes have to be completely covered with screed without the so called “air pockets” under the pipes. <br>9. Surface levelling – if necessary – using self levelling KNAUF FE 50 screed</p> <p><strong>ATTENTION</strong><br>Do not use the panels in direct contact with substances destructive to polystyrene, e.g. organic solvents (acetone, Nitro, benzene etc.). </p> <p><strong>PACKAGING, STORAGE, TRANSPORT</strong></p> <p>KNAUF Therm EXPERT FLOOR HEATING 200 λ 33 expanded polystyrene panels are only supplied in original manufacture’s packaging, i.e. that of KNAUF Industries Polska Sp. z o.o. </p> <p>The product packaging contains information on: product name, manufacturer’s name, production date, relevant Polish Standard number i.e. PN-EN 13163:2012 + A1:2015, a code in accordance with the standard and declared technical parameters</p> <p>KNAUF Therm EXPERT FLOOR HEATING 200 λ 33 expanded polystyrene panels should be stored in a manner protecting them against mechanical damage and atmospheric conditions. </p> <p><br></p> <p><br></p>

Expanded polystyrene boards KNAUF Therm PRO Roof/Floor EPS 100 λ 36 are produced in compliance with the PN-EN 13163:2012+A1:2015 harmonized European standard, according to which they have the following code: EPS –EN 13163-T2-L2-W2-S2-P4-BS150-CS(10)100-DS.(N)2-DS(70,-)1-DLT(1)5-TR150 KNAUF Therm PRO Roof/Floor EPS 100 λ 36 boards are manufactured in a double polystyrene expansion process, owing to it great thermal properties and the application facility. They are designed for insulation of roofs and floors in both existing and new buildings. The boards are produced with or without mill. Recommended applications: [LIST]Floor thermal insulation under prefabricated boards Thermal insulation of floors on the ground Floor insulation in floor heating systems Flat and pitched roof insulation Wall- and roof bitumen-laminated panels Thermal socle insulation in ETICS[/LIST]

KNAUF Therm Pro Facade/Roof/Floor EPS 70 λ 38 polystyrene panels are designated by the following code according to PN-EN standard EN 13163:2012+A1:2015 EPS EN 13163 T(1)-L(2)-W(2)-S(2)-P(5)-BS115-CS(10)70-DS(N)2-DS(70,-)1-TR100 KNAUF Therm Pro Facade/Roof/Floor EPS 70 λ 38 insulation panels are manufactured according to the double polystyrene foaming method, thanks to which they have very good functional properties besides excellent insulating properties. These panels are intended for broad applications in thermal insulation of floors and roofs in buildings both old and new. Panels are manufactured in versions with or without a seam. KNAUF Therm Pro Facade/Roof/Floor EPS 70 λ 38 polystyrene panels are manufactured according to European standard EN 13163:2012+A1:2015, and their basic application is: [LIST] exterior thermal insulation made using the "light wet" (BSO) method exterior thermal insulation made using the "light dry" method Thermal insulation on skeleton wall surface filling of expansion joints thermal insulation in closed gap of tri-layer wall thermal insulation in ventilated gap of tri-layer wall thermal insulation of tie beams, lintels and other thermal bridges thermal insulation of balcony loggias thermal insulation of window reveals and lintels thermal insulation of floors under floor underlayer thermal insulation of full and ventilated flat roofs as layered panels for walls and roofs with building paper linings thermal insulation of floors in water floor heating systems. [/LIST]

<p>KNAUF Therm EXPERT Facade XTherm λ 32 polystyrene graphite panels are designated by the following code according to PN-EN standard EN 13163:2012+A1:2015</p> <p>EPS –EN 13163-T(1)-L(2)-W(2)-S(5)-P(10)-BS75 -DS(N)2-DS(70,-)2-TR80</p> <p>KNAUF Therm EXPERT Facade XTherm λ 32 polystyrene panels are pressed from expanded polystyrene with an enrichening additive. The enriched composition of graphite added to polystyrene improves insulating properties, thanks to which better thermal insulation effects are achieved at lower panel thicknesses. The panels have straight or milled edges.</p> <p>PURPOSE<br>• External thermal insulation performed with the "light wet" method (BSO)<br>• Filling the dilatation<br>• Thermal insulation of balcony loggias<br>• Thermal insulation of jambs and window lintels</p> <p>PRIMARY ADVANTAGES OF KNAUF Therm EXPERT Facade XTherm λ 32<br></p> <p>Smaller thickness of the board compared to the usual styrofoam by approx. 30% (the possibility of using the board on balconies and loggias without major losses for residential areas)<br>Greater or the same thermal insulation of the board with lower thickness compared to ordinary styrofoam boards.</p>

<p>KNAUF Therm EXPERT Facade XTherm λ 31 polystyrene panels are designated by the following code according to PN-EN standard EN 13163:2012+A1:2015</p> <p>EPS –EN 13163-T(1)-L(2)-W(2)-S(5)-P(10)-BS100-DS(N)2-DS(70,-)2-TR100 </p> <p>KNAUF Therm EXPERT Facade XTherm λ 31 polystyrene panels are pressed from expanded polystyrene with an enrichening additive. The enriched composition of graphite added to polystyrene improves insulating properties, thanks to which better thermal insulation effects are achieved at lower panel thicknesses. The panels have straight or milled edges.</p> <p>PURPOSE<br>• External thermal insulation performed with the "light wet" method (BSO)<br>• Filling the dilatation<br>• Thermal insulation of balcony loggias<br>• Thermal insulation of jambs and window lintels</p> <p>PRIMARY ADVANTAGES OF KNAUF Therm EXPERT Facade XTherm λ 31<br></p> <p>Smaller thickness of the board compared to the usual styrofoam by approx. 30% (the possibility of using the board on balconies and loggias without major losses for residential areas).<br>Greater or the same thermal insulation of the board with lower thickness compared to ordinary styrofoam boards.</p>

<p>KNAUF Therm ETIXX façade λ 40 polystyrene panels are designated by the following code according to PN-EN standard EN 13163:2012+A1:2015</p> <p>EPS –EN 13163-T(1)-L(2)-W(2)-S2-P(5)-BS100-DS.(N)2-DS(70,-)1-TR100</p> <p>KNAUF Therm ETIXX façade λ 40 polystyrene panels are pressed from expanded polystyrene with an enrichening additive. The enriched composition of graphite added to polystyrene improves insulating properties, thanks to which better thermal insulation effects are achieved at lower panel thicknesses. The panels have straight or milled edges.</p> <p>PURPOSE<br>• exterior thermal insulation made using the ETICS (“light wet” = BSO) method<br>• exterior thermal insulation made using the "light dry" method<br>• Thermal insulation on skeleton wall surface<br>• thermal insulation in closed gap of tri-layer wall<br>• thermal insulation in ventilated gap of tri-layer wall<br>• thermal insulation of balcony loggias<br>• thermal insulation of tie beams, window reveals and lintels</p> <p>PRIMARY ADVANTAGES OF KNAUF Therm ETIXX facade λ 40<br>Approx. 30% lower panel thickness in comparison to ordinary polystyrene (possibility of using panel on balconies and loggias without significant losses of residential areas)<br>• greater or equal thermal insulating power of panels at lower thickness in comparison to ordinary polystyrene panels<br>• manufactured from foamed polystyrene enriched with graphite particles for excellent insulating parameters (low thermal conductivity λ = 0.040W/mK)<br>• the pressing technology ensures high dimensional stability => the panel has straight edges and a flat surface<br><br></p>

<p>KNAUF Therm ETIXX façade λ 42 polystyrene panels are designated by the following code according to PN-EN standard EN 13163:2012+A1:2015</p> <p>EPS –EN 13163-T(1)-L(2)-W(2)-S(2)-P(5)-BS75-DS(N)2-DS(70,-)1–TR 80</p> <p>KNAUF Therm ETIXX façade λ 42 polystyrene panels are pressed from expanded polystyrene with an enrichening additive. The enriched composition of graphite added to polystyrene improves insulating properties, thanks to which better thermal insulation effects are achieved at lower panel thicknesses. The panels have straight or milled edges.</p> <p>PURPOSE<br>• exterior thermal insulation made using the ETICS (“light wet” = BSO) method<br>• exterior thermal insulation made using the "light dry" method<br>• Thermal insulation on skeleton wall surface<br>• thermal insulation in closed gap of tri-layer wall<br>• thermal insulation in ventilated gap of tri-layer wall<br>• thermal insulation of balcony loggias<br>• thermal insulation of tie beams, window reveals and lintels</p> <p><br></p>

<p>KNAUF Therm EXPERT  Hydro EPS 100 λ 36 are produced in compliance with the PN-EN 13163:2012+A1:2015 harmonized European standard, according to which they have the following code:</p> <p>EPS – EN 13163-T(1)-L(3)-W(3)-S(5)-P(5)-BS150-CS(10)100-DS(N)2-DS(70,-)1</p> <p>KNAUF Therm EXPERT  Hydro EPS 100 λ 36 boards are manufactured in a double polystyrene expansion process, owing to it great thermal properties and the application facility.<br></p> <p>KNAUF Therm EXPERT Hydro EPS 100 λ 36 polystyrene boards are recommended for use in places where the payloads do not exceed 3000 kg / m<sup>2</sup>.</p> <p><strong>For proper use of panels on underground elements of the object, a functional anti-moisture insulation should be made on their surface.</strong></p> <p>PURPOSE</p> <p>Thermal insulation of underground construction elements<br>Protection of waterproofing against mechanical damage<br>Drainage (along with a nonwoven fabric)<br>Thermal insulation of plinths in the ETICS (formerly "light-wet" or<br>BSO)<br>Elimination of linear thermal bridges<br>Thermal insulation of terraces, also "green" (no vehicular traffic)</p> <p><strong>Special waterproof properties:</strong></p> <p>Plates produced from the mold, not cut from the block, which guarantees their high repeatability and dimensionality as well as increased hydrophobicity<br>LARGE PANEL DIMENSIONS 1200 x 600 mm - significantly accelerate assembly<br>A small-sized grid and scale on the surface makes it easier to cut and place plates<br>The drainage duct system guarantees drainage of water and moisture<br>The boards are resistant to humus acids in the soil.</p>

<p>KNAUF Therm PRO Parking EPS 200 λ 33 2 polystyrene panels are designated by the following code according to PN-EN standard EN 13163:2012+A1:2015</p> <p>EPS –EN 13163-T(1)-L(2)-W(2)-S(2)-P(5)-BS250-CS(10)200-DS(N)2-DS(70,-)1-DLT(1)5</p> <p>KNAUF Therm PRO Parking lot EPS 200 λ 33 is a specialist product with high compressive strength recommended by designers in places where the permissible payload does not exceed (according to EN 13 163, appendix D.2) 6000kG / m².<br></p><p>PURPOSE<br></p><ul><li>thermal insulation of floors under the floor deck, heavily loaded</li><li>thermal insulation of floors on the ground with the floor deck, heavily loaded</li><li>thermal insulation on the supporting structure for roofing</li><li>thermal insulation of roofs and roofs with the possibility of parking</li><li>thermal insulation of floors under the foundation of prefabricated panels</li><li>thermal insulation of plinths in external composite thermal insulation systems (BSO)</li></ul>

<p>Expanded polystyrene boards KNAUF Therm Pro Roof/Floor EPS 80 λ 37 are produced in compliance with the PN-EN 13163:2012+A1:2015 harmonized European standard, according to which they have the following code:</p> <p>EPS –EN 13163-T(1)-L(2)-W(2)-S(2)-P(5)-BS125-CS(10)80-DS.(N)2-DS(70,-)1-TR100 </p> <p>KNAUF Therm Pro Roof/Floor EPS 80 λ 37 boards are manufactured in a double polystyrene expansion process, owing to it great thermal properties and the application facility.<br>They are designed for insulation of roofs and floors in both existing and new buildings. The boards are produced with or without mill.</p> <p>PURPOSE</p> <ul><li>thermal insulation of floors under the foundation of prefabricated panels</li><li>thermal insulation of floors under the floor underlay</li><li>thermal insulation of floors on the ground</li><li>thermal insulation of full and ventilated flat roofs</li><li>as wall and roof sandwich panels with facings</li><li>external thermal insulation performed using the "light wet" (BSO) method</li><li>thermal insulation performed with the "light dry" method</li></ul>

Over-all is an up-light of easy and immediate application: a special polystyrene fixing plate isolating it from the ground, is directly fixed to the surface without any recessed in-ground device. The research on the shape and on the balance of the proportions have favoured the development of extremely neat and essential lines: it gives birth to a thin lighting body with no visible screws and reduced thickness. Among the different applications, Over-all will illuminate trees, bushes and shrubbery; it also can be installed next to vertical surfaces to illuminate them with grazing light.