Editable parking places object to design large-scale parking lots with freeform polygonal perimeter. With optional disabled parking places.

Polygonal verstellbares Bauteil zur Perimeter - Sockeldarstellung. Man setzt es im Grundriss ein und folgt mit dem Polygonzug der Außenkante des tragenden Mauerwerks. im Grundriss gibt es einen abschaltbaren Querschnitt. Diesen kann man beliebig in der Lage verändern und mit diesem kann man die Querschnittsmaße mit Hotspots ändern und somit Bauteildicken an bestehende Schichtendicken der Wand anpassen. Im 3D kann man dann dem schrägen Gelände folgen. Die Sockeltrogprofile passen sich in der Höhe an, Die UK der Perimeterdämmung bleibt gleich wie zuvor. Mit einem SOE-Befehl - Abzug mit verlängerung nach unten - zieht man das GDL von der berührten Wand ab.

Editable parking places object to design large-scale parking lots with freeform polygonal perimeter. With optional disabled parking places.

Automated ophthalmic perimeter. Unit has on screen display for rapid and accurate alignment of patients automatic pupil size measurement, seven different fixation aids, ergonomic chin rest, several threshold strategies, and high target intensity.

CloudTool allows you to easily manipulate point clouds in Archicad. Using CloudTool you will be able to show the point cloud origin for setting out, create contour level lines, create a cutting box, create a cutting polygon, label perimeter, area and segments, and animate the cutting box.

RG3 panel is manufactured with a 30mm thickness high density chipboard core fully encapsulated on galvanized steel, through a perimeter wrapping system. The panels system is installed on zinc steel pedestals with a non shaking head made on environmental Poliurethan ABS class allowing a postive panel lay out, and adjustable for different finished floor height. The system performs as per New European Norm EN 12825, and has CLASS Bfls1 in fire ressistance as per Norm EN 13501

RG3.EB panel is manufactured with a 30mm thickness high density chipboard core fully encapsulated on galvanized steel, through a perimeter wrapping system, panels faced by Linoleum, PVC or rubber . The panels system is installed on zinc steel pedestals with a non shaking head made on environmental Poliurethan ABS class allowing a postive panel lay out, and adjustable for different finished floor height. The system performs as per New European Norm EN 12825, and has CLASS Bfls1 in fire ressistance as per Norm EN 13501

Autopsy table shall be constructed of stainless steel. It shall be polished to a smooth finish without crevices, lapped edges, rivets, or bolts. Table comes with integrated sink, waste disposer, grid plates for flat work area and perimeter downdraft.

Ophthalmic adjustable instrument table. Four toed pedestal type base with foot pedal brake or hand operated clamp for securing table adjustment. Designed for use with slit lamp, ophthalmometer, perimeter and screening instruments.

FAAC J355 HA M30-P1 bollard is certified for the use in perimeter security; it has been purposely designed for the protection of sensitive areas, such as airports embassies, consulates, banks, harbors, etc. FAAC J355HA-M30-P1 bollard has been tested according to the American standards “ASTM F 2656-07 - Standard Test Method for Vehicle Crash Testing of Perimeter Barriers”, obtaining thus the certification for the highest penetration rate. The class M30-P1 indicates that FAAC J355 HA M30-P1 bollard is able to stop a 6800kg truck at a speed of 50Km/h (=30M/h) in 1 meter (P1). J355 HA M30-P1 main features are: 1. Tested according to ASTM F 2656-07 2. Integrated Hydraulic Unit concept 3. Kept lock in up position also in the event of power failure 4. Extreme care in the material selection 5. Rapid and silent movements

FAAC J355 HA M50 bollard is certified for the use in perimeter security; it has been purposely designed for the protection of sensitive areas, such as airports embassies, consulates, banks, harbors, etc. FAAC J355 HA M50 bollard has been tested according to PAS 68:2013 Impact test specifications for vehicle security barrier systems and IWA 14-1:2013 - Vehicle security barriers - Part 1: Performance requirement, vehicle impact test method and performance rating. FAAC J355 HA M50 bollard is able to stop a 7.500kg truck at a speed of 80Km/h (=50M/h). FAAC J355 HA M50 main features are: 1. Tested according to PAS 68:2013 and IWA 14-1:2013 2. Integrated Hydraulic Unit concept 3. Kept lock in up position also in the event of power failure 4. Extreme care in the material selection 5. Rapid and silent movements

FAAC J355 HA M30-P1 Emergency Fast Operation (EFO) bollard is certified for the use in perimeter security; it has been purposely designed for the protection of sensitive areas, such as airports embassies, consulates, banks, harbors, etc. FAAC J355HA-M30-P1 EFO bollard has been tested according to the American standards “ASTM F 2656-07 - Standard Test Method for Vehicle Crash Testing of Perimeter Barriers”, obtaining thus the certification for the highest penetration rate. The class M30-P1 indicates that FAAC J355 HA M30-P1 bollard is able to stop a 6800kg truck at a speed of 50Km/h (=30M/h) in 1 meter (P1). Emergency Fast Operation device (EFO) guarantees a very rapid rising speed (1.5s) to increase the offered protection. J355 HA M30-P1 EFO main features are: 1. Tested according to ASTM F 2656-07 2. Integrated Hydraulic Unit concept 3. Kept lock in up position also in the event of power failure 4. Extreme care in the material selection 5. Rapid and silent movements 6. Very quick emergency rising (1.5s)

FAAC J355 HA M50 Emergency Fast Operation (EFO) bollard is certified for the use in perimeter security; it has been purposely designed for the protection of sensitive areas, such as airports embassies, consulates, banks, harbors, etc. FAAC J355 HA M50 EFO bollard has been tested according to PAS 68:2013 Impact test specifications for vehicle security barrier systems and IWA 14-1:2013 - Vehicle security barriers - Part 1: Performance requirement, vehicle impact test method and performance rating. FAAC J355 HA M50 EFO bollard is able to stop a 7.500kg truck at a speed of 80Km/h (=50M/h). Emergency Fast Operation device (EFO) guarantees a very rapid rising speed (2s) to increase the offered protection. FAAC J355 HA M50 EFO main features are: 1. Tested according to PAS 68:2013 and IWA 14-1:2013 2. Integrated Hydraulic Unit concept 3. Kept lock in up position also in the event of power failure 4. Extreme care in the material selection 5. Rapid and silent movements 6. Very quick emergency rising (2s)

With its large dimensions, the DYNACO M3 COMPACT is an ideal interior flexible high speed roll up door for the industry and logistics. Its fast door cycle enables smooth internal traffic of goods and personnel. The interior high speed door keeps draught, humidity, dust and dirt out of your premises. A superior seal around the full perimeter of the flexible roll up door and the high operating speed result in significant energy savings. Low maintenance requirements and the advanced push-pull drive technology assure a long life time and a reduced cost of ownership for this high speed roll up door. Free of rigid elements in the curtain, DYNACO M3 COMPACT flexible roll up doors are safe for your staff and equipment. When accidentally dislodged, the door curtain will reinsert itself into its side guides, simply by opening and closing the roll up door.

Thanks to the superior and tight seal around the full perimeter of the roll up door, the DYNACO M3 ALL WEATHER high speed door is wind resistant up to class 4 of the European standard EN 12424. This exterior high speed roll up door protects your premises against wind, bad weather and extreme temperatures. It ensures energy savings and optimized traffic flows, logistic and transport activities. Innovative push-pull drive technology pulls down the DYNACO M3 ALL WEATHER high speed door in order to close it, without using any ballast. Even under a strong headwind the exterior high speed roll up door remains fully operational. With a curtain free of rigid elements, the DYNACO M3 ALL WEATHER is safe for your staff and equipment. When accidentally dislodged, the door curtain reinserts itself into the side guides after an open and close cycle. This avoids production down-time.

Partition made up of two Pladur® plasterboards screwed onto each side of a free, twin frame of galvanised steel and set apart a variable distance (10 mm minimum). Both structures are built on Pladur® studs (vertical elements) and Pladur® channels (horizontal elements). Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Partition made up of two Pladur® plasterboards screwed on each side to a free, twin frame of galvanised steel and set apart from each other a variable distance (minimum spacing of 10 mm + thickness of the middle plasterboard). Both structures are built on Pladur® studs (vertical elements) and Pladur® channels (horizontal elements). Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Partition made up of two Pladur® plasterboards screwed onto each side of a double, braced structure of galvanised steel and set apart from each other a variable distance (minimum spacing of 10 mm + thickness of the middle plasterboard). Both structures are built on Pladur® studs (vertical elements) and Pladur® channels (horizontal elements). Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Mixed partition made up of two independent Pladur® linings, both braced on each side by a supporting wall (to be determined by the design). The final thickness of the mixed partition is determined by the base wall. Each lining is made up of a structure of profiles of galvanised sheet steel, built on studs (vertical elements and channels (horizontal elements), on whose interior side, according to the free-standing height, the studs will need be braced with brackets attached to the core of the studs and the base wall, leaving a space between the structure and the wall of a minimum of 10 mm. On the exterior side of each lining structure, one or two Pladur® plasterboards are screwed on. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling on the floor and ceiling, etc. Completely finished with Quality Level 1 for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Independent lining made up of a structure of galvanised sheet steel profiles over T-47/T-45 profiles vertical elements) and Clip U track (horizontal elements), on whose interior side, the profiles need to be braced using standard reach brackets, leaving a space between the structure and the wall of a minimum of 10 mm. On the exterior side of this structure, one or more Pladur® plasterboards are screwed on. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, watertight/acoustic perimeter joints, etc., as well as anchors for Clip U track, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Independent lining made up of a structure of galvanised sheet steel profiles over Pladur® studs and Pladur® channels (horizontal elements), on whose interior side, depending on the height to be covered, the studs must be braced with brackets that attach to the core of the studs and the support wall, leaving a minimum space between the structure and the wall of 10 mm. On the exterior side of this structure one or more Pladur® plasterboards are screwed on. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, watertight/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of the Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Partition made up of a Pladur® plasterboard screwed to each side of a galvanized steel structure, over Pladur® studs (vertical elements) and Pladur® channels (horizontal elements). Commensurate amounts of Pladur® materials: screws, compounds, joint tape, watertight/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of the Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Partition made up of two or more Pladur® plasterboards screwed to each side of a galvanized steel structure, over Pladur® studs (vertical elements) and Pladur® channels (horizontal elements). Commensurate amounts of Pladur® materials: screws, compounds, joint tape, watertight/acoustic perimeter joints, etc., as well as anchors for floor and ceiling channels, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of the Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE

Suspended ceiling made up of a frame of galvanised sheet steel profiles over a base of Pladur® T-47/T-45 profiles hung from the framing by means of Pladur® T-47/T-45 clips + Ø 6 mm threaded rod, and supported by Pladur® profiles mechanically attached around the whole perimeter. One or two Pladur® plasterboards are screwed to this frame. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient joints, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a frame of galvanised sheet steel profiles over a base of Pladur® T-47/T-45 profiles or mullions hung from the framing by means of Pladur® standard reach brackets + Ø 6 mm threaded rod, and supported by Pladur® profiles attached mechanically along the whole perimeter. One or two Pladur® plasterboards are screwed to this frame. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient joints, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a frame of galvanised sheet steel profiles over a base of Pladur® TF profiles hung from the framing by means of Pladur® hangers + Ø 6 mm threaded rod, and supported on Pladur® profiles mechanically attached to the whole perimeter. One or two Pladur® plasterboards are screwed to this frame. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient joints, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a frame of galvanised sheet steel profiles over a base of Pladur® T-60 profiles hung from the framing by means of Pladur® T60 clips + Ø 6 mm threaded rod, and supported on Pladur® profiles attached mechanically around the whole perimeter. One or more Pladur® plasterboards are screwed to this frame. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient joints, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a frame of galvanised sheet steel profiles over a base of Pladur® hung from the framing by means of Pladur® hanger brackets + Ø 6 mm threaded rod, and supported on Pladur® channels mechanically attached around the whole perimeter. One or more Pladur® plasterboards are screwed to this frame. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient joints, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Continuous ceiling made up of a unique frame of Pladur® mullions supported on lateral support walls by means of Pladur® channels and attached mechanically around the whole perimeter. A Pladur® plasterboard is screwed onto this frame of profiles, with commensurate amounts of anchors, screws, resilient/acoustic perimeter joints, joint tapes, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Mineral wool over the back of the plasterboards and profiles. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a twin frame of galvanised sheet steel profiles installed at different levels. The primary frame is made up of Pladur® PH-45 hung from the framing by means of Ø 6 mm threaded rod, nut and locking nut. The secondary frame is made up of Pladur® T-47/T-45 profiles fitted perpendicularly to the lower part of the primary frame by fitting directly on the double, die-cut hangers of the Pladur® PH-45 profile and supported around the perimeter on Pladur® angular profiles or U track Clip, which is attached mechanically along its whole length. One or more Pladur® plasterboards are screwed perpendicularly onto the secondary frame. Commensurate amounts of anchors, hangers, hangers, resilient/acoustic perimeter joints, joint compounds and tapes, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design.) Installed according to Pladur® recommendations, UNE 102043 and CTE requirements.

Suspended ceiling made up of a twin frame of galvanised sheet steel profiles installed at different levels (D). The primary frame is made up of Pladur® T-60 profiles hung from the framing by means of Pladur® T-60 hanger brackets and Ø 6 mm threaded rod. The secondary frame is made up of Pladur® T-60 profiles hung from the primary one by means of Pladur® channel intersection connector T-60 and supported around the perimeter with angular profiles o U track, which are attached mechanically around its whole length. One or more Pladur® plasterboards are screwed perpendicularly onto the secondary frame. Commensurate amounts of anchors, hangers, screws, resilient/acoustic perimeter joints, joint compounds and tapes, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a twin, primary and secondary, frame of Pladur® T-60 profiles in a "C" shape by means of the Pladur® H T-60 connection placed at the same level and suspended from the framing by means of Pladur® T-60 hanger brackets and Ø 6 mm threaded rod, supported on angular or U track profiles which are attached mechanically along the whole length. One or more Pladur® plasterboards are screwed perpendicularly onto the secondary frame. Commensurate amounts of anchors, hangers, hangers, screws, resilient/acoustic perimeter joints, joint compounds and tapes, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a twin frame of galvanised sheet steel profiles installed at different levels. The primary frame is made up of Pladur® GL U track with a thickness of 1.5 mm, hung from the framing by means of M-50 hangers and Ø 6 mm threaded rod with nut and locking nut. The second frame is made up of Pladur® T-47 profiles fitted to the primary frame by means of Pladur® channel connectors GL and supported around the perimeter on Pladur® angular profiles and U track Clip, which are attached mechanically along its whole length. One or two Pladur® plasterboards are screwed perpendicular to the secondary frame. Commensurate amounts of anchors, hangers, screws, resilient/acoustic perimeter joints, joint compound, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a frame of galvanised sheet steel profiles over a base of Pladur® T-60 profiles set 300 mm apart, properly hung from the framing by means of Pladur® T-60 hanger brackets + Ø 6 mm threaded rod, and supported on Pladur® profiles attached mechanically around the whole perimeter. Pladur® Fon+ plasterboards are screwed to this frame. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient joints, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a twin frame of galvanised sheet steel profiles installed at different levels (D). The primary frame is made up of Pladur® T-60 profiles hung from the framing by means of Pladur® T-60 hanger brackets and Ø 6 mm threaded rod. The secondary frame is made up of Pladur® T-60 profiles spaced 300 mm apart, hung from the primary frame by means of Pladur® T-60 hanger brackets supported around the perimeter on angular or U track profiles which are attached mechanically along their whole length. Pladur® Fon+ plasterboards are screwed perpendicularly onto the secondary frame. Commensurate amounts of anchors, hangers, hangers, screws, resilient/acoustic perimeter joints, joint compounds and tapes, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a frame of galvanised sheet steel profiles covered with a pre-lacquered laminate on its face side. This frame forms a square 600 mm x 600 mm composed of primary, secondary and angular Pladur® galvanised sheet steel profiles attached mechanically around the whole perimeter. The frame is hung from the framing by means of anchors, threaded bar and pieces of Pladur® TR, on which the Pladur® Fon+ Decor plasterboards are supported. Commensurate amounts of anchors, hangers, hangers, etc. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Partition made up of two Pladur® plasterboards screwed on each side of a double, braced structure of galvanised steel and spaced a minimum of 10 mm apart. Both structures are built on Pladur® studs (vertical elements) and Pladur® channels (horizontal elements). Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Partition made up of two Pladur® plasterboards screwed on each side to a double, braced structure of galvanised steel and set apart from each other a variable distance (minimum spacing of 10mm). Both structures are built on Pladur® studs (vertical elements) and Pladur® channels (horizontal elements). Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Partition made up of a structure of galvanised sheet steel metal profiles 90 mm wide and 0.7 mm thick, with Pladur® CH-90 studs and Pladur® E-90 studs (vertical elements), spaced 600 mm on centre, and Pladur® J-92 channels (horizontal elements). Toward the inaccessible side (hollow area) a partition face is created enclosing a Pladur® CH plasterboard 25 mm thick with E-90 first and last studs with CH-90 studs in between, having, there being between both materials a continuous band of Pladur® intumescent acoustic sealant On the accessible side of this partition, one or more 15mm thick Pladur® F plasterboards are screwed on. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design) except on the inaccessible side of the system. Core of each Pladur>® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements

Partition made up of a structure of galvanised sheet steel metal profiles 90 mm wide and 0.7 mm thick, with Pladur® CH-90 studs and Pladur® E-90 studs (vertical elements), spaced 600 mm on centre, and Pladur® J-92 channels (horizontal elements). Toward the inaccessible side (hollow area) a partition face is created enclosing a Pladur® CH plasterboard 25 mm thick with E-90 first and last studs and CH-90 studs in between, having a continuous band of Pladur® intumescent acoustic sealant between both materials. On the accessible side of this partition, one or more 15mm thick Pladur® F plasterboards are screwed on, including joint treatment. Afterwards a self-bearing lining is applied, consisting of a structure of profiles of galvanized steel sheet metal on Pladur® studs and channels (horizontal elements), on whose interior side, depending on the height to be covered, the studs must be braced with angular pieces that are attached to the core of the studs and the Pladur® CH partition, leaving a space between the structure and the partition of a minimum of 10 mm. On the exterior side of this structure one or more Pladur® plasterboards are screwed on. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on the floor and ceiling, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc., with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), except on the inaccessible side of the system. Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Mixed partition made up of two independent Pladur® linings, both braced on each side by a Pladur® partition wall. Each partition is made up of a structure of galvanised sheet steel profiles, built on studs (vertical elements) and channels (horizontal elements), on whose interior side, depending on the free-standing height, the studs will need be braced with brackets attached to the core of the studs and the Pladur®, partition, leaving a space between the structure and the partition base of a minimum of 10 mm. On the exterior of each lining structure, one or two Pladur® plasterboards are screwed on. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient/acoustic perimeter joints, etc., as well as anchors for channels on floors and ceilings, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the project). Core of each Pladur® structure filled completely with mineral wool. Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

FAAC J275 F 2K Fixed traffic bollard does not require invasive civil works, nor electric wiring. It is therefore suitable Delimitation and protection of perimeter of critical areas like: military sites, airports, embassies, consulates, banks, marine zones, prisons, sensitive industrial sites or wherever high security is required. J275 F 2K main features are: 1. Power supply and wiring not requested 2. Simple laying and limited excavation 3. Guarantees aesthetic coherency in multiple installations together with retractable bollards. 4. High resistance to impact

FAAC J275 HA 2K automatic retractable perimeter security bollard is recommended for intensive usage in perimeter security applications. Tested in accordance to ASTM F2656-07 standard (“Standard Test Method for Vehicle Crash Testing of Perimeter Barriers”), via software 3D simulation. J275 HA 2K main features are:: 1. Integrated Hydraulic Unit concept 2. Guaranteed for a high use frequency 3. Simple maintenance (can be performed by a single person) 4. Rapid and silent movements 5. Anti-burglar head (manual lowering device protected by armored keylock) 6. High resistance to impacts (M30 ranking in double installation) 7."Gentle Stop” function to grant soft stop on the limit switch

This dimpled sheet forms a continuous drainage layer while the fused-on compression-resistant permanent-filtration geotextile reliably keeps the dimple structure from silting up. Installed outside the cellar-wall waterproofing as a second water-impermeable shell, DELTA®-TERRAXX affords all-round protection from impounded, fissure and seepage water as per DIN 18195. The sheet protects perimeter insulation boards from moisture, safeguards their insulation performance, and features that special 'permanently warm and dry' effect for cellars. It is free from recycled material, bears the CE 0799-CPD-13 seal, and conforms to the requirements of EN 13252. At 400kN per square metre, the outstanding compressive strength of DELTA®-TERRAXX permits the sheet to be installed at depths of up to 10 metres even under extreme water impact conditions. The sheet is absolutely rot-proof and reliably drains away methane gas and radon.