Total Zone is a zonestamp which will solve all your zone problems. No more duplicated zones for each different output, one zone for all output. With the Model View Options this zone can be different in each view, increasing the BIM factor of your model. CHECK OUT ALL THE FEATURES!

Dual output electrosurgical unit. Solid state power source with foot switch jacks, monopolar and bipolar outputs, and four independent modes of operation. Used in the operating room or surgicenter as an alternative to the scalpel for cutting tissue.

Stand alone uninterruptible power supply (UPS) available in 120, 208 or 240 VAC configuration. Power output can range from 200 VA to 3000 VA depending on the application. Used in areas where power protection is required for computer systems, communication equipment, etc. The UPS is used to keep the equipment on line or safely turn the equipment off in the event of a power loss.

Hand held camcorder with full HD recording, LCD display and microphone. Camcorder will also have capability for still picture capture. Audio and video output will be fully transferable to a computer.

Laboratory centrifuge. This is a medium to large capacity unit with an operating range of -20 degrees to 40 degrees C. It permits running samples at body temperature. It also has a rotor imbalance detector and an auto-shut down capability if the rotor load is out of balance. The unit is constructed of a stainless steel chamber with a rear exhaust and is a low heat output unit. Used in laboratories to spin samples for further analysis.

Wall mounted monopolar electrosurgical unit. It has a wall mounted hyfrecator. Unit features solid-state transistorized circuitry, dual power output, output dial with timer control, bipolar forceps, and isolated bipolar output. Unit has a monopolar mode where the current passes through an active cable and active electrode to the patient and back to the generator through a return electrode. It can be table mounted and is designed for routine applications in dermatology, gynecology, proctology, dentistry, podiatry and other clinical areas. Wall mounting bracket not included in system size.

Laser imager. Solid state laser that provides high resolution images of superior quality and accuracy. An infrared laser beam is scanned across each film by a precision rotating polygon, while correcting optics focus and control the beam's intensity. Can be interfaced to as many as eight (8) modalities with interface kit. For use with digital output imaging modalities.

Portable defibrillator-monitor-recorder with built in advisory protocol. Unit is designed for use by ambulance crews and cardiac arrest teams where a physician will not be available to determine if defibrillation is appropriate. System provides lead II ECG monitoring only, recording and logging of a resuscitation event for later review. This system provides up to 360 joules output and has an external battery charger available. Unit is sometimes referred to as an "Automatic Advisory Defibrillator" or "AAD". Unit may be line powered with an optional battery substitute pack.

A 68 to 75 kW electric steam generator/boiler with low water cut-off/level control, water level sight glass, main off/on switch, pilot light, blowdown/drain valves, safety valve, and steam pressure gauge. The unit can deliver steam at operating pressures up to 90 PSIG and produce a minimum steam output of 205 lbs./hr. Unit provides condensate free steam, between 97% to 100% vapor quality, needed to power sterilizers, water stills, utensil sanitizers, and other steam powered equipment when facility supplied steam is not available. Various electrical configurations are available for the heaters, for pricing purposes 208V, 60HZ, 3PH, 209AMPS is used.

Defibrillator analyzer. Characteristics/components include automatic and portable with direct reading; accurately verifies the output characteristics of all defibrillators while simulating the resistance of the human body; output energy measured in joules or watt seconds on two scales of 0-200.0 or 0-1000; output energy remains displayed until the reset button is depressed once the defibrillator is fired; and output jacks provided for oscilloscope connection to observe defibrillator pulse wave shape. Shall include the optional pacemaker testing module if required by the end user. Battery powered models are available.

Light and radiation field analyzer for quality assurance testing of radiation therapy devices. Unit is self contained and checks the coincidence of light and radiation fields, symmetry of radiation field, flatness of radiation field, and penumbra size of the radiation field. Unit has a built in graphics printer for hard copy output of scanned information.

Electrosurgery analyzer. This is a power analyzing system that verifies electrosurgical specifications such as output power, radio frequency leakage and output waveforms. This is necessary because electrosurgical units should provide safe controlled power output at RF with a predetermined physiological load so that burns and electrical shocks are avoided.

High flexibility can be considered one of the main plus of SLOT. Able to ensure functional lighting with excellent light output, SLOT also allow to create more or less marked light accents suitable for variuos applications. The UP-DOWN versions house two lamps, each one with its own adjustable reflector and independent control gear.

High flexibility can be considered one of the main plus of SLOT. Able to ensure functional lighting with excellent light output, SLOT also allow to create more or less marked light accents suitable for variuos applications. The UP-DOWN versions house two lamps, each one with its own adjustable reflector and independent control gear.

High-class LED luminaire designed for direct-indirect light emission and surface mounting, with round lamp housing in a flat design made of seamlessly welded, powder-coated extruded aluminium. Available in silver RAL9006 or white RAL9016 fine matte finish. Base plate made of steel sheet for holding the LED boards and the electronics. Electrical connection through 3 or 5-pin connection terminal. Indirect emission of light through separate LED boards. Indirect emission of light from 10 to 25%, depending on the size of the luminaire and the power output. Direct light emission through a diffuser made of satined PMMA for an almost homogeneous emission of light or a satined PMMA microprism for reduced brightness (LRA). Indirect light emission through a diffuser made of satined PMMA. Luminaire equipped with the latest generation of LED boards, colour rendering index Ra > 80, small colour tolerance MacAdam 3. Luminaire available in 4 sizes, 2 power outputs (HO/LO) and 2 colour temperatures (3000K/4000K).

High-class pendant LED luminaire designed for direct-indirect light emission, with round lamp housing in a flat design made of seamlessly welded, powder-coated extruded aluminium. Available in silver RAL9006 or white RAL9016 fine matte finish. Base plate made of steel sheet for holding the LED boards and the electronics. Mounting by suspension cables (max. length 2000mm), infinitely adjustable with quick release. Electrical connection through 3 or 5-pin transparent power supply cable and ceiling housing. Indirect light emission through separate LED boards. Indirect light emission from 10 to 25%, depending on the size of the luminaire and the power output. Direct light emission through a diffuser made of satined PMMA for an almost homogeneous emission of light or a satined PMMA microprism for reduced brightness (LRA). Indirect light emission through a diffuser made of satined PMMA. Luminaire equipped with the latest generation of LED boards, colour rendering index Ra > 80, small colour tolerance MacAdam 3. Luminaire available in 4 sizes, 2 power outputs (HO/LO) and 2 colour temperatures (3000K/4000K).

High-class pendant LED luminaire designed for direct-indirect light emission, with round lamp housing in a flat design made of seamlessly welded, powder-coated extruded aluminium. Available in silver RAL9006 or white RAL9016 fine matte finish. Base plate made of steel sheet for holding the LED boards and the electronics. Mounting by suspension cables (max. length 2000mm), infinitely adjustable with quick release. Electrical connection through 3 or 5-pin transparent power supply cable and ceiling housing. Indirect light emission through separate LED boards. Indirect light emission from 10 to 25%, depending on the size of the luminaire and the power output. Direct light emission through a diffuser made of satined PMMA for an almost homogeneous emission of light or a satined PMMA microprism for reduced brightness (LRA). Indirect light emission through a diffuser made of satined PMMA. Luminaire equipped with the latest generation of LED boards, colour rendering index Ra > 80, small colour tolerance MacAdam 3. Luminaire available in 4 sizes, 2 power outputs (HO/LO) and 2 colour temperatures (3000K/4000K).

High-class LED luminaire designed for direct-indirect light emission and surface mounting, with round lamp housing in a flat design made of seamlessly welded, powder-coated extruded aluminium. Available in silver RAL9006 or white RAL9016 fine matte finish. Base plate made of steel sheet for holding the LED boards and the electronics. Electrical connection through 3 or 5-pin connection terminal. Indirect emission of light through separate LED boards. Indirect emission of light from 10 to 25%, depending on the size of the luminaire and the power output. Direct light emission through a diffuser made of satined PMMA for an almost homogeneous emission of light or a satined PMMA microprism for reduced brightness (LRA). Indirect light emission through a diffuser made of satined PMMA. Luminaire equipped with the latest generation of LED boards, colour rendering index Ra > 80, small colour tolerance MacAdam 3. Luminaire available in 4 sizes, 2 power outputs (HO/LO) and 2 colour temperatures (3000K/4000K).

Straight lines of double horizontal collectors provide high thermal output at compact dimensions

Purmo’s Delta Twin M decorative radiators integrate the state of the art technology of execution with remarkable design, providing their Users with highest qualities of climate comfort and functionality. The bottom middle connection solution present in all height options of the Twin M radiators, in association with the elegant yet practical tower drying rail offered as standard and the high heat output, make these radiators highly suitable for application in large designer bathrooms or even bathing rooms. Regularly manufactured as a 2-columned version only (in 5 height varieties and 2 length options), in RAL 9016 snow-white coloring, at Clients’ request Delta Twin M can be delivered in any other available RAL colour.

Wall –mounted Aura Slim convectors supplement in an optimum way the basic range of the onfloor Aura and trench convectors Aquilo. The universal product is also suitable for separate wall-mounted installation. Aura Slim flat convectors meet the contradictory requirements for minimal dimensions, maximal output and amiable construction as for design. The conception of Aura Slim convectors is built on implementation of steel sheating and grid with heat exchanger from copper and aluminum similar to those applied in the onfloor Aura convectors. The basic colour version makes it possible for the body to adapt easily into its environment while the optional non-standard colourful version helps to emphasize the body and makes it an integral part of the interior. The modest and aesthetic design of the body is the principal prerequisite for the installation in private as well as public interiors, in the rooms of standard size as well as in vast spaces. Aura Slim Comfort convectors are produced in 360 standard dimensional types.

Wall–mounted Aura Slim convectors supplement in an optimum way the basic range of the onfloor Aura and trench convectors Aquilo. The universal product is also suitable for separate wall-mounted installation. Aura Slim flat convectors meet the contradictory requirements for minimal dimensions, maximal output and amiable construction as for design. The conception of Aura Slim convectors is built on implementation of steel sheating and grid with heat exchanger from copper and aluminum similar to those applied in the onfloor Aura convectors. The basic colour version makes it possible for the body to adapt easily into its environment while the optional non-standard colourful version helps to emphasize the body and makes it an integral part of the interior. The modest and aesthetic design of the body is the principal prerequisite for the installation in private as well as public interiors, in the rooms of standard size as well as in vast spaces. Aura Slim Comfort convectors are produced in 360 standard dimensional types.

Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CD896 is a very compact speaker enclosure loaded with one 2-way coaxial transducer plus a second dedicated low-frequency transducer. The coaxial transducer is composed of an 8” (203 mm) LF driver and a 90° x 60° HF horn with 1.7” (43 mm) diaphragm compression driver. The second LF transducer is another 8” driver. Advanced engineering and construction of the complete speaker achieves a space-efficient design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The two 8” LF drivers work together to achieve an increase in overall output and improved mid-bass impact. The coaxial transducer can be rotated in 45° increments to tailor high-frequency coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The LF/HF transducer in the Vector CD896 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 1.7 inch (43 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single neodymium magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, and the use of a single neodymium magnet reduces the speaker’s weight, size, and cost. Dual Low-Frequency Drivers The Vector CD896 employs two mutually-coupled 8” LF transducers to achieve its high efficiency and impactful performance in a relatively small enclosure. Avia™ Digital Signal Processing Every aspect of the Vector CD896 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Versatile Installation The Vector CD896 is particularly effective in applications where compact dimensions and targeted pattern control are desirable. Such applications include front fill, delay fill, under-balcony, small front of house, and foreground music, especially when mated with a subwoofer. Its clean appearance facilitates acceptance by architects and interior designers, and its 25° beveled rear corners allow it to be mounted close to walls or ceilings without obstructing sight lines. Concealed M6 mounting points are included to accommodate either an optional yoke bracket or forged shoulder eyebolts (each sold separately).

Loudspeaker – Dual 12” Bi-Amplified 3-Way Coaxial 60° x 45° Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CD1265 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer plus a second dedicated low-frequency transducer. The coaxial transducer is composed of a 12” (305 mm) LF driver and a 60° x 45° HF horn with 3” (76 mm) diaphragm compression driver. The second LF transducer is a 12” driver with enhanced low-frequency performance. Advanced engineering and construction of the complete speaker achieves a space-efficient design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The two 12” LF drivers work together in a bi-amplified configuration to achieve an increase in overall output and improved low-frequency pattern control. The coaxial transducer can be rotated in 45° increments to tailor high-frequency coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The LF/HF transducer in the Vector CD1265 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single neodymium magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, and the use of a single neodymium magnet reduces the speaker’s weight, size, and cost. Dual Low-Frequency Drivers The Vector CD1265 employs an innovative and unconventional bi-amplified 3-way configuration using dual 12” LF transducers. Relative to the coaxial transducer, the dedicated LF transducer features increased excursion capability below 100 Hz. The frequency range of both drivers overlaps at precise levels to achieve a flat summed response, producing a higher overall output level compared to a more traditional LF/MF/HF 3-way system. The use of dual LF transducers also provides the benefit of extending usable LF pattern control by over an octave, reducing acoustic reflections in the room for better clarity and “projection.” Avia™ Digital Signal Processing Every aspect of the Vector CD1265 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Two channels of processing are employed to deliver an optimized signal to each transducer. Versatile Installation The Vector CD1265 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate either an optional yoke bracket or forged shoulder eyebolts (each sold separately).

Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CD1295 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer plus a second dedicated low-frequency transducer. The coaxial transducer is composed of a 12” (305 mm) LF driver and a 90° x 45° HF horn with 3” (76 mm) diaphragm compression driver. The second LF transducer is a 12” driver with enhanced low-frequency performance. Advanced engineering and construction of the complete speaker achieves a space-efficient design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The two 12” LF drivers work together in a bi-amplified configuration to achieve an increase in overall output and improved low-frequency pattern control. The coaxial transducer can be rotated in 45° increments to tailor high-frequency coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The LF/HF transducer in the Vector CD1295 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single neodymium magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, and the use of a single neodymium magnet reduces the speaker’s weight, size, and cost. Dual Low-Frequency Drivers The Vector CD1295 employs an innovative and unconventional bi-amplified 3-way configuration using dual 12” LF transducers. Relative to the coaxial transducer, the dedicated LF transducer features increased excursion capability below 100 Hz. The frequency range of both drivers overlaps at precise levels to achieve a flat summed response, producing a higher overall output level compared to a more traditional LF/MF/HF 3-way system. The use of dual LF transducers also provides the benefit of extending usable LF pattern control by over an octave, reducing acoustic reflections in the room for better clarity and “projection.” Avia™ Digital Signal Processing Every aspect of the Vector CD1295 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Two channels of processing are employed to deliver an optimized signal to each transducer. Versatile Installation The Vector CD1295 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate either an optional yoke bracket or forged shoulder eyebolts (each sold separately).

Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CD1565 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer plus a second dedicated low-frequency transducer. The coaxial transducer is composed of a 15” (381 mm) LF driver and a 60° x 45° HF horn with 3” (76 mm) diaphragm compression driver. The second LF transducer is a 15” driver with enhanced low-frequency performance. Advanced engineering and construction of the complete speaker achieves a space-efficient design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The two 15” LF drivers work together in a bi-amplified configuration to achieve an increase in overall output and improved low-frequency pattern control. The coaxial transducer can be rotated in 45° increments to tailor high-frequency coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The LF/HF transducer in the Vector CD1565 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single neodymium magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, and the use of a single neodymium magnet reduces the speaker’s weight, size, and cost. Dual Low-Frequency Drivers The Vector CD1565 employs an innovative and unconventional bi-amplified 3-way configuration using dual 15” LF transducers. Relative to the coaxial transducer, the dedicated LF transducer features increased excursion capability below 100 Hz, with a 4” (102 mm) voice coil and powerful ceramic magnet for extra output capacity and higher power handling. The frequency range of both drivers overlaps at precise levels to achieve a flat summed response, producing a higher overall output level compared to a more traditional LF/MF/HF 3-way system. The use of dual LF transducers also provides the benefit of extending usable LF pattern control by over an octave, reducing acoustic reflections in the room for better clarity and “projection.” Avia™ Digital Signal Processing Every aspect of the Vector CD1565 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Two channels of processing are employed to deliver an optimized signal to each transducer. Versatile Installation The Vector CD1565 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate forged shoulder eyebolts (sold separately).[1] Notes: 1. There is no yoke bracket available from Crestron for this model.

Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CD1595 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer plus a second dedicated low-frequency transducer. The coaxial transducer is composed of a 15” (381 mm) LF driver and a 90° x 45° HF horn with 3” (76 mm) diaphragm compression driver. The second LF transducer is a 15” driver with enhanced low-frequency performance. Advanced engineering and construction of the complete speaker achieves a space-efficient design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The two 15” LF drivers work together in a bi-amplified configuration to achieve an increase in overall output and improved low-frequency pattern control. The coaxial transducer can be rotated in 45° increments to tailor high-frequency coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The LF/HF transducer in the Vector CD1595 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single neodymium magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, and the use of a single neodymium magnet reduces the speaker’s weight, size, and cost. Dual Low-Frequency Drivers The Vector CD1595 employs an innovative and unconventional bi-amplified 3-way configuration using dual 15” LF transducers. Relative to the coaxial transducer, the dedicated LF transducer features increased excursion capability below 100 Hz, with a 4” (102 mm) voice coil and powerful ceramic magnet for extra output capacity and higher power handling. The frequency range of both drivers overlaps at precise levels to achieve a flat summed response, producing a higher overall output level compared to a more traditional LF/MF/HF 3-way system. The use of dual LF transducers also provides the benefit of extending usable LF pattern control by over an octave, reducing acoustic reflections in the room for better clarity and “projection.” Avia™ Digital Signal Processing Every aspect of the Vector CD1595 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Two channels of processing are employed to deliver an optimized signal to each transducer. Versatile Installation The Vector CD1595 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate forged shoulder eyebolts (sold separately).[1] Notes: 1. There is no yoke bracket available from Crestron for this model.

6.5” 2-Way Coaxial 90° x 90° Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CS699 is a very compact speaker enclosure loaded with one 2-way coaxial transducer composed of a 6.5” (165 mm) LF driver and a 90° x 90° HF horn with 1” (25 mm) diaphragm compression driver. Advanced engineering and construction of the complete speaker achieves a highly space-efficient design with unusually high output capability and consistent off-axis response. Its coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality. High-Performance Coaxial Transducer The coaxial transducer in the Vector CS699 features a true high-frequency horn and compression driver married to a powerful 6.5” woofer, affording high efficiency and exceptional clarity for both speech and program material. Its broad 90° x 90° coverage pattern works well in small spaces and short-throw applications. Tight integration between the compression driver diaphragm and woofer voice coil achieves coherent summation in the crossover region, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. Avia™ Digital Signal Processing Every aspect of the Vector CS699 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Versatile Installation The Vector CS699 is particularly effective in applications where compact dimensions and targeted pattern control are desirable. Such applications include front fill, delay fill, under-balcony, control room, and background music, especially when mated with a subwoofer. Its clean appearance facilitates acceptance by architects and interior designers, and its diminutive size allows it to be mounted close to walls or ceilings without obstructing sight lines. Concealed M6 mounting points are included to accommodate either an optional yoke bracket (sold separately) or third-party pan/tilt type speaker mount.

Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CS1265 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer composed of a 12” (305 mm) LF driver and a 60° x 45° HF horn with 3” (76 mm) diaphragm compression driver. Advanced engineering and construction achieve a space-efficient speaker design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The transducer can be rotated in 45° increments to tailor coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The transducer in the Vector CS1265 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single, powerful ceramic magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, resulting in performance rivaling a more expensive bi-amplified design. Using a single magnet also reduces the speaker’s weight, size, and cost. Avia™ Digital Signal Processing Every aspect of the Vector CS1265 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Versatile Installation The Vector CS1265 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate either an optional yoke bracket or forged shoulder eyebolts (each sold separately).

Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CS1295 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer composed of a 12” (305 mm) LF driver and a 90° x 45° HF horn with 3” (76 mm) diaphragm compression driver. Advanced engineering and construction achieve a space-efficient speaker design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The transducer can be rotated in 45° increments to tailor coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The transducer in the Vector CS1295 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single, powerful ceramic magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, resulting in performance rivaling a more expensive bi-amplified design. Using a single magnet also reduces the speaker’s weight, size, and cost. Avia™ Digital Signal Processing Every aspect of the Vector CS1295 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Versatile Installation The Vector CS1295 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate either an optional yoke bracket or forged shoulder eyebolts (each sold separately).

Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CS1565 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer composed of a 15” (381 mm) LF driver and a 60° x 45° HF horn with 3” (76 mm) diaphragm compression driver. Advanced engineering and construction achieve a space-efficient speaker design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The transducer can be rotated in 45° increments to tailor coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The transducer in the Vector CS1565 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single, powerful ceramic magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, resulting in performance rivaling a more expensive bi-amplified design. Using a single magnet also reduces the speaker’s weight, size, and cost. Avia™ Digital Signal Processing Every aspect of the Vector CS1565 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Versatile Installation The Vector CS1565 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate either an optional yoke bracket or forged shoulder eyebolts (each sold separately).

Loudspeaker – 15” 2-Way Coaxial 90° x 45° Crestron® Vector™ Performance Loudspeakers provide a professional sound reinforcement speaker solution for large indoor spaces and venues. Featuring a revolutionary coaxial transducer design complemented by advanced Avia™ digital signal processing, Vector loudspeakers deliver exceptional intelligibility and natural sound quality for speech reinforcement, foreground music, and multimedia presentation applications. Compact, aesthetically-pleasing enclosures afford remarkable performance in less space. A choice of sizes and coverage patterns is offered to address the varying applications and room geometries found in auditoriums, theaters, lecture halls, houses of worship, convention centers, hotel ballrooms, sports facilities, night clubs, and public spaces. The Vector CS1595 is a compact, trapezoidal speaker enclosure loaded with one 2-way coaxial transducer composed of a 15” (381 mm) LF driver and a 90° x 45° HF horn with 3” (76 mm) diaphragm compression driver. Advanced engineering and construction achieve a space-efficient speaker design with high output capability and consistent pattern control. Its integrated coaxial transducer aligns the low-frequency and high-frequency elements to produce precise transient response and uniform directionality across the entire frequency range. The transducer can be rotated in 45° increments to tailor coverage to the space and allow for horizontal or vertical orientation of the enclosure. Advanced Coaxial Transducer The transducer in the Vector CS1595 represents a revolutionary advancement in coaxial speaker design. Its high-frequency horn features a large 3 inch (76 mm) titanium diaphragm compression driver, which operates at frequencies lower than typical, allowing the high-frequency horn to smooth the response of the low frequency section to reduce shadowing of the woofer by the horn. The woofer’s large radiating surface works in conjunction with the high-frequency horn to improve directional control at the lower end of the horn’s frequency range resulting in better pattern control throughout the critical voice band. The large diaphragm also allows the compression driver to produce higher sound pressure levels without distortion to deliver incredibly clear and dynamic sound quality for both speech and program material. The complete coaxial transducer assembly employs a single, powerful ceramic magnet with dual-gap geometry, which minimizes the spacing between the compression driver and woofer voice coils. This integrated approach virtually eliminates the delay between the two drivers, allowing a passive crossover to be used to seamlessly blend the horn and woofer into a single point source. The reduced demand on the internal crossover helps to maximize efficiency and damping, resulting in performance rivaling a more expensive bi-amplified design. Using a single magnet also reduces the speaker’s weight, size, and cost. Avia™ Digital Signal Processing Every aspect of the Vector CS1595 is designed to take advantage of the signal refining abilities of a Crestron Avia DSP. Vector loudspeakers and Avia processing work synergistically to produce a superior speaker system tuned for accurate, uncolored reproduction of voice and program signals. Precision signal processing is employed to accomplish what can’t be done physically, strategically eliminating harsh-sounding resonances caused by horn reflections while retaining every nuance of the original signal. Further refinements are employed to maximize transient response and deliver smooth bandwidth performance both within and beyond the speaker’s nominal coverage pattern. The result is an extremely natural sounding speaker system with superior pattern control, improved intelligibility, reduced listener fatigue, and higher gain before feedback. Versatile Installation The Vector CS1595 is particularly effective in systems where targeted pattern control is desirable, including front of house, delay fill, and foreground music applications. Its clean appearance and familiar format facilitate acceptance by architects and interior designers, and the 40° trapezoidal angle allows it to be mounted near walls or ceilings without obstructing sight lines. Concealed M10 mounting points are included to accommodate either an optional yoke bracket or forged shoulder eyebolts (each sold separately).

The Vector™ SUBD18 is a direct-radiating, vented subwoofer featuring two high-power, long-excursion 18” (457 mm) transducers. It is designed to provide extended low frequency support for use with CS and CD series Vector Performance Loudspeakers, and is capable of producing articulate and impactful deep bass response for all types of installed music and multimedia applications. The Vector SUBD18 requires use with a Crestron Avia™ DSP to ensure rated performance and reliable operation. It can be driven using either one or two amplifier channels. Its enclosure is optimally tuned to provide maximum low frequency output in a low-profile package designed to fit under low stages and other confined spaces. Vibration isolation feet are provided on the bottom, with aligned recesses on top for stacking of multiple units. Concealed M10 mounting points are included to allow for suspended installation using forged shoulder eyebolts (sold separately).

The Vector™ SUBS15 is a direct-radiating, vented subwoofer featuring a single high-power, long-excursion 15” (381 mm) transducer. It is designed to provide extended low frequency support for use with CS and CD series Vector Performance Loudspeakers, and is capable of producing articulate and impactful deep bass response for all types of installed music and multimedia applications. The Vector SUBS15 requires use with a Crestron Avia™ DSP to ensure rated performance and reliable operation. Its enclosure is optimally tuned to provide maximum low frequency output in a compact package, facilitating placement in tight spaces. Concealed M10 mounting points are included to allow for suspended installation using forged shoulder eyebolts (sold separately).

The Vector™ SUBS18 is a direct-radiating, vented subwoofer featuring a single high-power, long-excursion 18” (457 mm) transducer. It is designed to provide extended low frequency support for use with CS and CD series Vector Performance Loudspeakers, and is capable of producing articulate and impactful deep bass response for all types of installed music and multimedia applications. The Vector SUBS18 requires use with a Crestron Avia™ DSP to ensure rated performance and reliable operation. Its enclosure is optimally tuned to provide maximum low frequency output in a compact package, facilitating placement in tight spaces. Concealed M10 mounting points are included to allow for suspended installation using forged shoulder eyebolts (sold separately).

The GLS-PART-CN is a sleek, surface-mount partition sensor that utilizes the dependable Cresnet® wired network for power and communications. Designed with hospitality environments in mind, this easily installed sensor uses an infrared (IR) beam to sense the position of movable partitions within a space. The IR beam’s signal strength is adjustable and features a sensing distance of up to four feet, making the GLS-PART-CN a versatile partition sensor with optimized sensing accuracy. Three LEDs on the unit provide at-a-glance information on the sensor’s state of power, communications, and partition detection. The GLS-PART-CN offers mounting options for rooms with finished or droptile ceilings. The GLS-PART-CN has plug-in outputs and built-in time delays. Also, the partition sensor easily connects via Cresnet® to a Crestron control processor to manage divisible room environments. Cresnet The GLS-PART-CN uses the dependable Cresnet wired network for communication between devices. Cresnet provides a simple solution for configuring and wiring sensors as part of any complete Crestron system. Cresnet is the communications backbone for Crestron lighting dimmers, keypads, shades, thermostats, and many other devices. This flexible 4-wire bus provides data communications and 24 Volts DC power for all of the devices on the Cresnet network. Versatile Installation The GLS-PART-CN has a white finish and can mount directly into finished ceilings. For droptile ceilings, the GLS-PART-CN installs into a 1-gang, 3-1/2 inch deep electrical box. In both instances, a decorator-style faceplate[1] can be used to match the GLS-PART-CN with the color of the room. Only about 20 mm of the GLS-PART-CN is visible after installation, making it an unobtrusive addition to a room. Digital Output This sleek sensor delivers unparalleled versatility through an additional output on the terminal block, which can be used as an alternate method of integration with a Crestron Control System® or other system. The 5th pin of the Cresnet connector provides either a 24 Volt, 10 mA output or a closure to ground, perfect for connection with a Versiport or digital input port. Notes: 1. Sold separately.

The DM-DGE-200-C Digital Graphics Engine transforms an HD or Ultra HD touch screen display into an advanced Crestron® controller. Featuring Crestron Smart Graphics™ technology, the DM-DGE-200-C provides for the creation of a completely custom graphical environment combining advanced controls for audio & video, lighting, shades, HVAC, security, and other functions with dual-window video display, annotation, audio feedback, and web browsing. Its low-profile, surface-mountable design allows for a discreet installation behind a flat-panel display, under a table, or inside a lectern or equipment rack. Alternately, the DM-DGE-200-C offers an enhanced presentation and productivity solution for meeting rooms and huddle spaces using Crestron PinPoint™ UX technology. Without requiring a touch screen or any other controls or programming, PinPoint UX leverages the room’s display to create an intelligent meeting space seamlessly integrated as part of a complete Crestron Fusion® Cloud managed enterprise. The DM-DGE-200-C features a 4K UHD capable HDMI® output for connection to the display device, and includes a USB HID port for touch, mouse, and/or keyboard input. Additional control ports are provided to enable control of the display device and other equipment.[1,2] A single HDMI input allows an AirMedia® wireless presentation gateway or other high-definition video source to be connected and displayed on screen. A DM 8G+® input is included to support 4K UHD and DCI 4K sources connected at a DM® transmitter or switcher.[3] Additionally, H.264 streaming video signals can be received over a high-speed Ethernet connection.[4] Ethernet also provides the interface to a Crestron control system, which is required for touch screen and OSM control applications.[5]   PinPoint™ UX The DM-DGE-200-C takes any meeting room or huddle space display device to a higher level, enhancing its usability while eliminating the need for any other AV or control equipment in the room. Built-in PinPoint UX technology works with Crestron Fusion Cloud and the PinPoint app to provide an intelligent meeting space that greets attendees with useful on-screen information and facilitates BYOD presentation without the need for a touch screen, button panel, or remote. As attendees enter the room, the personalized welcome screen provides essential details about the current scheduled meeting along with simple instructions to guide presenters through connecting their mobile devices and starting the presentation. As the meeting progresses, gentle notifications appear periodically to indicate how much time is left in the meeting and what’s scheduled next for the room. Pop-up messages may also appear prominently on screen, sent from Fusion, in the event of an emergency or other important announcement. With PinPoint UX, system operation is essentially invisible. Simply connecting a laptop, tablet, or other presentation source causes the video inputs to switch and the display to turn on (if not already on). Sources can be connected via a wired interface or wirelessly via Crestron AirMedia.[6] The display can also be scheduled to turn on and off at set times. The status of the display and any connected devices is reported to Fusion to enable monitoring and logging of equipment usage, and notification if a device is powered off or disconnected. Complete setup and configuration of PinPoint UX is performed through a simple web browser interface or through Fusion, with the ability to configure many PinPoint UX devices at once over the network. Note: PinPoint UX may be used without Crestron Fusion Cloud to provide a simple standalone meeting room presentation solution with customizable welcome screen and automatic operation. PinPoint UX also supports direct integration with Microsoft® Exchange Server.   Touch Screen Interface For traditional touch screen control applications, the DM-DGE-200-C pairs perfectly with a Crestron TSD-2220 HD Touch Screen Display to deliver a high-definition 21.5” touch screen control panel that’s ideal for home automation, corporate multimedia presentation, and command center applications. Third-party touch screens of varying sizes can be used with the DM-DGE-200-C to fulfill a range of control, collaboration, video display, and interactive kiosk solutions. The DM-DGE-200-C currently supports either Full HD 1080p60 (1920x1080@60Hz) or 4K UHD (3840x2160@30Hz) display resolutions. OSM Interface On-screen menu (OSM) capability offers an alternative to touch screen control, enabling a fully-customizable control menu to appear on any TV or video display, with simple navigation provided using the same Crestron handheld remote that’s controlling the TV. A USB mouse may also be used. The DM-DGE-200-C delivers stunning menu graphics that pop up unobtrusively at the edge of the screen alongside the video image, letting you quickly adjust lighting and climate control settings, lower the shades, check security system status, and lock or unlock the front door without interrupting the movie or TV program you’re watching. Detailed alert messages can also appear on screen in case of a security alarm, doorbell, or other event. You can even pop up a live streaming camera window to see who’s at the door or coming up the driveway. Smart Graphics™ The DM-DGE-200-C uses Smart Graphics to deliver the ultimate user experience and the ultimate value by enabling the creation of dynamically rich user interfaces with incredible efficiency and unparalleled functionality. Using Smart Graphics, programmers can swiftly integrate fluid gesture-driven controls, animated feedback, rich metadata, embedded apps and widgets, and full-motion video for a deeply engaging and ultra-intuitive touch screen experience. Crestron Smart Graphics offers these enhancements and more: Cool-looking graphical buttons, sliders, knobs, and gauges that are intuitive and fun to use Kinetic effects to enhance the feeling of realism, with lists and toolbars that scroll with momentum at the flick of a fingertip Drag-and-drop objects that snap into place, offering an easy way to switch sources Dashboard widgets to personalize the touch screen with clocks, weather, news, and other information [7] A power-saving screensaver that can display the time, temperature, and other text content at a reduced brightness level Customizable themes allowing a completely different look and feel for every user, event, or season Fully-developed SmartObjects® that enable sophisticated control over complex devices with minimal programming A consistent look and feel across touch screens of varying sizes Notes: 1. When using the PinPoint UX application without a control system, the onboard RS-232 COM port supports basic on/off power control of a single display device and the IR port is not utilized. The COM and IR ports may all be utilized for fully-customizable control applications through integration with a Crestron control system with custom programming. 2. When using the PinPoint UX application without a control system, CEC may be utilized at the HDMI output to provide basic on/off power control of a single display device. CEC may be utilized through either HDMI port for fully-customizable control applications through integration with a Crestron control system with custom programming. 3. When using the PinPoint UX application without a control system, if a DM 8G+ transmitter is connected, the transmitter’s input switching capability is limited to auto-switching mode and any control ports on the transmitter are disabled. Manual switching and control port functionality on the transmitter require a control system with custom programming. Control port functionality is not supported at all on a DM-TX-4K-100-C-1G transmitter. 4. Supports up to two simultaneous streaming video inputs with a maximum combined total bitrate of 25 Mbps. Streaming video input is not supported using the PinPoint UX application unless connected to a Crestron control system with custom programming. 5. When connected to a DM switcher via DM 8G+, the DM-DGE-200-C can obtain its LAN connection through the switcher but does not receive an IP address on the switcher’s private network. Thus, it requires an IP address on the customer’s LAN. 6. AirMedia wireless presentation support requires a wireless LAN and the addition of an AirMedia presentation gateway, model AM-101, sold separately. 7. Web browsing, weather information, and certain other functions require an Internet connection. 8. The maximum cable length for DigitalMedia 8G+ (DM 8G+) is dependent upon the type of cable, resolution of the video signal, and capabilities of each connected device. Refer to the “DM 8G+ Maximum Cable Lengths” table for a detailed overview. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for DM system design guidelines. All wire, cables, transmitters, and other devices are sold separately. 9. The audio signal from any source connected to the HDMI or DM input is passed through to the HDMI output without processing, downmixing, volume control, or mute control. 10. The HDMI video input signal cannot be downscaled by more than 4x. For instance, a 1920x1080 source signal can be displayed no smaller than 480x270 pixels. 11. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.

<p>The Saros® SB-200-P is a stereo sound bar designed to provide enhanced audio performance for a flat panel display. Its full-range, front-firing speakers offer an improvement over the small, rear-facing speakers typical of many display devices. The bracket included with the sound bar allows for attachment to a wall surface, or the unit can be placed on a shelf below or above the display.</p> <p>Built-in amplification allows for direct connection to the line-level audio output of the display device, or to the output of an audio preamp, switcher, mixer, tv tuner, codec, or Crestron DM® receiver.[1] The amplifier powers on automatically when an audio input signal is detected, and powers off if no signal is detected for several minutes.</p> <p>The SAROS SB-200-P sound bar is ideally suited for use with the Crestron RL® 2 Group Collaboration System and other unified communication and videoconferencing systems. It is equally well-suited for use in any small to medium sized room or public space in a hotel, restaurant, museum, medical center, airport, office building, or residence.</p> <p>FEATURES</p> <p>Summary Of Features<br>High-quality, full-range amplified stereo sound bar<br>Delivers enhanced sound quality and performance for use with any flat panel display<br>Mounts to a wall or sits on a shelf<br>Balanced or unbalanced stereo line-level audio input [1]<br>Unbalanced stereo audio cable included<br>Powers on and off automatically<br>100 to 240 Volt AC powered</p> <p>Notes:<br>1. The SAROS SB-200-P has a fixed input level. It must be connected to an audio source equipped with adjustable audio output level.</p>

<p>Crestron Connect It™ offers a cost-effective, simple-to-use presentation solution that provides connectivity, cable management, and one-touch control, all in one stylish tabletop device that's remarkably easy to install. Using a Crestron Connect It Cable Caddy (TT-100 Series), anyone can easily connect their laptop, tablet, or smartphone device and instantly start presenting. Multiple cable caddies can be deployed across any sized table to enable natural, free-flowing collaboration amongst several participants in a huddle room, conference room, council chamber, or training lab. Simple one-touch control at each cable caddy makes toggling between sources effortless.</p> <p>Four Crestron Connect It Cable Caddy models are available:<br>TT-100 - Includes a 120 Volt outlet and space for four customer-supplied cables<br>TT-101 - Includes a 120 Volt outlet plus HDMI®, VGA, Audio, and Ethernet cables<br>TT-110 - Provides space for four customer-supplied cables; no outlet<br>TT-111 - Includes HDMI, VGA, Audio, and Ethernet cables; no outlet</p> <p>Connect to Present, Tap to Switch<br>Starting a presentation and switching between presenters is incredibly easy and intuitive. To begin, simply connect a source and the room display automatically turns on and displays that source. With a simple tap of the finger, any other presenter can take over the presentation at any time via a pair of soft-touch capacitive buttons, conveniently positioned for left or right hand access. Multi-colored lights surrounding each button clearly indicate when a source is connected and ready, and when that source is being displayed.</p> <p>A Personal Connection<br>Stowed neatly within its recessed storage compartment, the Crestron Connect It Cable Caddy provides four easy pull-out interface cables for HDMI, VGA, Audio, and Ethernet. Custom cables can also be accommodated, and select models include a single AC power outlet.</p> <p>The "Hole" Thing<br>Mounting the cable caddy device requires just a 4 inch (102 mm) round hole through the tabletop surface. The device is secured in place with a single twist-on locking ring, which features three lock-down screws to prevent the device from coming loose.</p> <p>The Whole Package<br>A complete Crestron Connect It collaboration solution is incredibly easy to specify and install. A single presentation switcher mounts conveniently under the table to enable automatic switching for up to four TT-100 series cable caddies. It can also provide control and connectivity for the room’s display device along with a host of other features and functions, all without requiring any custom programming. Three presentation switcher options are available including the HD-MD8X1-4K 4K Scaling Presentation Switcher, the DM-MD8X1-4K-C 4K Scaling Presentation Switcher w/HDBaseT® Output, and the DMPS3-4K-150-C 3-Series® 4K DigitalMedia™ Presentation System 150. Just add a Crestron® sound bar (CCS-SPK-SB-100), or an MP-AMP30 or MP-AMP40 amplifier with Saros® speakers for a total huddle room collaboration solution.[1]<br>Other system configurations are possible using any Crestron DMPS3 system or DigitalMedia switcher. Integration with a Crestron Control System is enabled directly via Cresnet®, or through a DM 8G+® transmitter via USB. A DM 8G+ transmitter offers a long-distance, single-wire interface with auto-switching inputs for a single TT-100 series cable caddy.[2,3]</p> <p>FEATURES</p> <p>Summary Of Features<br>Simple-to-use tabletop presentation interface<br>Stylish, unimposing design<br>Simple one-touch toggling between multiple presenters<br>Soft-touch capacitive buttons with multicolored status indicators<br>Convenient left or right hand access<br>Recessed cable storage compartment<br>Available with or without cables<br>Optional 120 Volt AC power outlet<br>4K and Ultra HD compatible<br>Compact and easy to install<br>Available in black or gray textured<br>Integrates with DigitalMedia™ and other systems<br>Complete system solutions available with no programming required</p> <p>Notes:<br>1. Item(s) sold separately.<br>2. Compatible DM 8G+ Transmitters include the DM-TX-4K-202-C, DM-TX-4K-302-C, DM-TX-401-C, and DM-TX-201-C, all sold separately.<br>3. The DM-TX-201-C does not have a USB host port. It has a USB device port, which does not supply USB power. When connected to a DM-TX-201-C, the cable caddy must be powered through a connection to a Cresnet network or power supply. The PW-2407RU 18 Watt Cresnet Power Supply (sold separately) is available to power multiple cable caddies.</p>

The UDX range delivers stunning experiences and savings on installation and shipping time, reducing costs significantly. The most compact, high-brightness laser projectors with integrated cooling on the market, the UDX projectors bring reliable and razor-sharp 4K images to every type of event and venue. The UDX-4K32 features 4K UHD resolution and 31,000 lumens light output to ensure flawless shows with accurate colors at all times. The Constant Light Output (CLO) functionality also guarantees peace of mind by providing constant brightness and color over time. The UDX platform offers the widest color spectrum in the industry. Without compromising on brightness, the UDX color quality matches the renowned Xenon quality and outperforms the Rec. 709 color space.

The UDX range delivers stunning experiences and savings on installation and shipping time, reducing costs significantly. The most compact, high-brightness laser projectors with integrated cooling on the market, the UDX projectors bring reliable and razor-sharp 4K images to every type of event and venue. The UDX-W32 features WUXGA resolution and 32,000 lumens light output to ensure flawless shows with accurate colors at all times. The Constant Light Output (CLO) functionality also guarantees peace of mind by providing constant brightness and color over time. The UDX platform offers the widest color spectrum in the industry. Without compromising on brightness, the UDX color quality matches the renowned Xenon quality and outperforms the Rec. 709 color space.

The UDX range delivers stunning experiences and savings on installation and shipping time, reducing costs significantly. The most compact, high-brightness laser projectors with integrated cooling on the market, the UDX projectors bring reliable and razor-sharp 4K images to every type of event and venue. The UDX-U32 features UXGA resolution and 30,000 lumens light output to ensure flawless shows with accurate colors at all times. The Constant Light Output (CLO) functionality also guarantees peace of mind by providing constant brightness and color over time. The UDX platform offers the widest color spectrum in the industry. Without compromising on brightness, the UDX color quality matches the renowned Xenon quality and outperforms the Rec. 709 color space.

The UDX range delivers stunning experiences and savings on installation and shipping time, reducing costs significantly. The most compact, high-brightness laser projectors with integrated cooling on the market bring reliable and razor-sharp 4K images to every type of event and venue. The UDX-4K22 features 4K UHD resolution and 21,000 lumens light output to ensure flawless shows with accurate colors. The Constant Light Output (CLO) functionality also guarantees constant brightness and color over time. The UDX platform offers the widest color spectrum in the industry, matching the renowned Xenon quality and outperforming the Rec. 709 color space - without compromising on brightness.

The UDX range delivers stunning experiences and savings on installation and shipping time, reducing costs significantly. The most compact, high-brightness laser projectors with integrated cooling on the market bring reliable and razor-sharp 4K images to every type of event and venue. The UDX-W22’s WUXGA resolution and 22,000 lumens light output ensure flawless shows with accurate colors at all times. The Constant Light Output (CLO) also provides constant brightness and color over time. Users enjoy the widest color spectrum in the industry that matches the renowned Xenon quality and outperforms the Rec. 709 color space - without compromising on brightness.

<p>DigitalMedia™ NVX technology transports ultra high-definition 4K video with 60 Hz frame rates and 4:4:4 color sampling over standard Gigabit Ethernet. Support for HDR video (HDR10) and HDCP 2.2 ensures the ultimate in picture quality and compatibility for all of today’s varied media sources. Using standards-based Ethernet wiring and switches, DM® NVX delivers a vastly scalable, high-performance solution for enterprise-wide 4K content distribution.[1]</p> <p>The Crestron® DM-NVX-350 is a compact video encoder/decoder designed to function as either a transmitter or receiver with the ability to switch between the two modes programmatically via commands from a Crestron control system. Featuring simple web-based control and management, USB and KVM integration, and support for copper and fiber LAN connectivity, the DM-NVX-350 offers a one-stop solution for any-sized network AV installation.[2]</p> <p><strong>Real-Time 4K60 Video Distribution</strong><br>Engineered for demanding conference room and classroom applications, DM NVX ensures real-time, full-motion 4K60 video performance for the presentation of multimedia, videoconferencing, and live camera images. DM NVX employs high-quality JPEG 2000 encoding using a patent-pending technique that overlaps scaling and encoding latencies, achieving an ultra-low end-to-end latency of 30 ms at 60 fps, so on-screen functions such as mousing and game play are fluid and natural.</p> <p><strong>Encoder and Decoder in One</strong><br>In a single compact device, the DM-NVX-350 is configurable to operate as either a network AV encoder or decoder.</p> <ul><li>As an encoder, it allows a laptop computer, camera, or other media source to be connected via HDMI® and then transmitted over the network.[1]</li><li>As a decoder, it receives the signal from a DM NVX encoder and feeds it to a display device via the HDMI output. It can quickly and easily switch between multiple encoders on the network alongside locally-connected HDMI sources.[1]</li><li>The encoder/decoder mode can be switched on-the-fly via a control system to provide a versatile, cost-effective presentation switching solution using one integrated device.</li></ul><p><strong>2x1 HDMI® Auto-Switcher </strong></p>The DM-NVX-350 includes two HDMI inputs. Switching between the two inputs can be performed automatically using auto-switching mode, manually using the onboard input select button, programmatically via a Crestron control system, or through a computer using a web browser. When used as a decoder mounted behind a typical conference room display device, the HDMI inputs provide a convenient way to connect a Crestron AirMedia® presentation gateway.[1] <p><br></p><p><strong>HDMI Output</strong><br>When configured as a decoder, the DM-NVX-350’s HDMI output feeds the decoded signal to the local display device (or any other device with an HDMI input). Its built-in scaler ensures an optimal image, scaling the encoded source resolution up or down to match the native resolution of the display device. When used as an encoder, the HDMI output can be used to feed a local display, confidence monitor, or audio system.[1,3]</p> <p><strong>USB and KVM Integration</strong><br>For a complete signal management solution, DM NVX supports the extension of USB signals, which may be switched and routed alongside the AV signal or separately via the control system. USB 2.0 host and device ports are provided on each DM-NVX-350 box, allowing a USB mouse, keyboard, or other device to be connected at one box and routed to a computer or other host at another box. KVM switch functionality is a natural application for this feature, but all types of USB peripherals are supported including whiteboards, touch screens, game controllers, cameras, mobile devices, headsets, and flash drives.[4]</p> <p>USB signals can also be routed to other locations where a DM NVX box does not exist using Crestron USB over Ethernet Extender Modules (USB-EXT-DM). USB signals can be freely routed between DM NVX and USB-EXT-DM units over Ethernet under the management of a Crestron control system.</p> <p><strong>7.1 Surround Sound Audio</strong><br>DM NVX supports the lossless transport of 7.1 surround sound audio signals, including Dolby® TrueHD, Dolby Atmos®, DTS-HD®, DTS:X®, and uncompressed linear PCM. In decoder mode, the DM-NVX-350 has the ability to receive both multichannel and 2-channel downmix signals from a DM-NVX-351 or DM-NVX-351C encoder, allowing either signal to be selected at the HDMI output while the 2-channel signal is automatically routed to the analog output.</p> <p><strong>Analog Audio Embedding or De-embedding </strong><br>A balanced stereo analog audio port is included, which may be configured as either an input or output. As an input, it allows a stereo audio source to be connected and combined with the video signal from either HDMI input or the incoming network video stream. As an output, it can provide a stereo line-level signal to feed a local sound system or sound bar. The output volume is adjustable via a control system or web browser.[5]</p> <p><strong>Breakaway Audio</strong><br>A DM NVX decoder may select and combine separate video and audio signals from two different inputs, even two different encoders. There are just two exceptions: A) signals may not be combined between the two onboard HDMI inputs, and B) combining signals from two separate encoders is limited to 2-channel stereo audio.[6,7]</p> <p><strong>Text Overlay</strong><br>The ability to display dynamic or fixed text on screen provides a means to label the video source or display special instructions, schedules, announcements, alerts, and other messaging.</p> <p><strong>Video Wall Processing</strong><br>A video wall composed of up to 64 individual displays can be configured using multiple DM-NVX-350 units. Each unit provides fully-adjustable zoom capability and bezel compensation to accommodate a range of video wall configurations and display types. One DM-NVX-350 is required per display, supporting configurations of up to eight wide by up to eight high.</p> <p><strong>Key Features</strong><br></p><ul><li>4K60 4:4:4 video over standard Gigabit Ethernet</li><li>No latency penalty for real-time video performance</li><li>HDR (High Dynamic Range) video support (HDR10)</li><li>Dolby® TrueHD, Dolby Atmos®, DTS-HD®, DTS:X®, and uncompressed 7.1 linear PCM audio support</li><li>HDCP 2.2 compliant</li><li>Configurable as an encoder or decoder</li><li>Dual onboard RJ45 LAN ports</li><li>Option for a fiber optic network connection via SFP port [2]</li><li>Enterprise-grade security</li><li>Two auto-switching HDMI® inputs and one HDMI output [1]</li><li>Built-in 4K60 4:4:4 scaling</li><li>Onboard video wall processing</li><li>Analog audio port configurable as a balanced stereo input or output [5]</li><li>Analog audio embedding or de-embedding</li><li>Audio breakaway capability [6,7]</li><li>Dynamic text overlay capability</li><li>RS-232 and IR control ports [9]</li><li>CEC device control gateway [9]</li><li>USB and KVM signal extension and routing [4]</li><li>Easy setup via built-in webpages</li><li>Fully-controllable via a Crestron® control system</li><li>Compact, surface-mountable form factor</li><li>Powered via local power pack or optional power injector [8]</li><li>100-240V universal power pack included</li></ul> <p>1. 4K60 4:4:4 performance requires the use of HDMI cables with a minimum TMDS bandwidth of 18 Gbps, such as Crestron model CBL-HD (20 ft / 6.1 m max. length). If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables with a minimum bandwidth of 10.2 Gbps may be used, such as Crestron models CBL-HD-LOCK or CBL-HD (any available length). Performance may also be affected if an HDMI coupler is inserted in the HDMI signal path. Crestron coupling products (MP-WP150, MP-WP152, MPI-WP150, or FTA-CP-HD-101) and cable retractors (CBLR2-HD) all have a specified bandwidth of 10.2 Gbps, and thus do not support 4K60 4:4:4. Please be aware that bandwidth loss is cumulative, so the combination of multiple components inserted inline may reduce performance.<br>2. To add a fiber optic LAN port requires the purchase of a Crestron SFP-1G series SFP transceiver module (sold separately). All LAN ports on the DM-NVX-350 are for connection to an Ethernet based AV network or device; they cannot be connected to the “DM” ports of other Crestron devices.<br>3. When in encoder mode, the HDMI output resolution is matched to the resolution of the encoded source.<br>4. The DM-NVX-350 can be configured to accept the connection of a USB device or a USB host, not both. Crestron DM NVX products are engineered to deliver maximum compatibility with the widest possible range of USB products. Crestron does not guarantee that all USB products are compatible with DM NVX products. DM NVX is compatible with Crestron USB-EXT-DM products, but is not compatible with the “USB HID only” signal extender technology found in other Crestron DM products.<br>5. The analog audio port can function as an input or output, not both. Analog audio output is only functional when the DM-NVX-350 is receiving a 2-channel stereo input signal. To derive a 2-channel downmix signal from a multichannel surround sound source, please refer to the Crestron DM-NVX-351 or DM-NVX-351C.<br>6. Audio from one onboard HDMI input may not be combined with video from the other onboard HDMI input.<br>7. Combining audio from one encoder with video from another encoder utilizes the secondary 2-channel audio stream. Multichannel audio from one encoder cannot be combined with video from another encoder.<br>8. The DM-NVX-350 is powerable using the 24V power pack (included) or a DM-PSU-ULTRA-MIDSPAN (sold separately).<br>9. Device control via RS-232, IR, CEC, or Ethernet requires integration with a Crestron control system.<br>10. As an encoder, the DM-NVX-350 does not transmit audio via the secondary 2-channel stream except when it is receiving a 2-channel stereo input signal via the HDMI or analog inputs.<br>11. 3D video input signals are automatically converted to 2D.<br>12. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.</p>

<p>DigitalMedia™ NVX technology transports ultra high-definition 4K video with 60 Hz frame rates and 4:4:4 color sampling over standard Gigabit Ethernet. Support for HDR video (HDR10) and HDCP 2.2 ensures the ultimate in picture quality and compatibility for all of today’s varied media sources. Using standards-based Ethernet wiring and switches, DM® NVX delivers a vastly scalable, high-performance solution for enterprise-wide 4K content distribution.[1]</p> <p>The Crestron® DM-NVX-351 is a compact video encoder/decoder designed to function as either a transmitter or receiver with the ability to switch between the two modes programmatically via commands from a Crestron control system. Featuring simple web-based control and management, USB and KVM integration, and support for copper and fiber LAN connectivity, the DM-NVX-351 offers a one-stop solution for any-sized network AV installation.[2]</p> <p>The DM-NVX-351 includes all the features of the DM-NVX-350 with the addition of surround sound to stereo downmixing. Refer to the “7.1 Surround Sound Audio with Downmixing” section below for details.</p><p> </p><p><strong>Real-Time 4K60 Video Distribution</strong><br>Engineered for demanding conference room and classroom applications, DM NVX ensures real-time, full-motion 4K60 video performance for the presentation of multimedia, videoconferencing, and live camera images. DM NVX employs high-quality JPEG 2000 encoding using a patent-pending technique that overlaps scaling and encoding latencies, achieving an ultra-low end-to-end latency of 30 ms at 60 fps, so on-screen functions such as mousing and game play are fluid and natural.</p><p> </p><p><strong>Encoder and Decoder in One</strong><br>In a single compact device, the DM-NVX-351 is configurable to operate as either a network AV encoder or decoder.</p> <ul><li>As an encoder, it allows a laptop computer, camera, or other media source to be connected via HDMI® and then transmitted over the network.[1]</li><li>As a decoder, it receives the signal from a DM NVX encoder and feeds it to a display device via the HDMI output. It can quickly and easily switch between multiple encoders on the network alongside locally-connected HDMI sources.[1]</li><li>The encoder/decoder mode can be switched on-the-fly via a control system to provide a versatile, cost-effective presentation switching solution using one integrated device.</li></ul><p><strong>2x1 HDMI® Auto-Switcher </strong></p><p>The DM-NVX-351 includes two HDMI inputs. Switching between the two inputs can be performed automatically using auto-switching mode, manually using the onboard input select button, programmatically via a Crestron control system, or through a computer using a web browser. When used as a decoder mounted behind a typical conference room display device, the HDMI inputs provide a convenient way to connect a Crestron AirMedia® presentation gateway.[1]</p><p> </p><p><strong>HDMI Output</strong><br>When configured as a decoder, the DM-NVX-351’s HDMI output feeds the decoded signal to the local display device (or any other device with an HDMI input). Its built-in scaler ensures an optimal image, scaling the encoded source resolution up or down to match the native resolution of the display device. When used as an encoder, the HDMI output can be used to feed a local display, confidence monitor, or audio system.[1,3]</p><p> </p><p><strong>USB and KVM Integration</strong><br>For a complete signal management solution, DM NVX supports the extension of USB signals, which may be switched and routed alongside the AV signal or separately via the control system. USB 2.0 host and device ports are provided on each DM-NVX-351 box, allowing a USB mouse, keyboard, or other device to be connected at one box and routed to a computer or other host at another box. KVM switch functionality is a natural application for this feature, but all types of USB peripherals are supported including whiteboards, touch screens, game controllers, cameras, mobile devices, headsets, and flash drives.[4]</p> <p>USB signals can also be routed to other locations where a DM NVX box does not exist using Crestron USB over Ethernet Extender Modules (USB-EXT-DM). USB signals can be freely routed between DM NVX and USB-EXT-DM units over Ethernet under the management of a Crestron control system.</p><p> </p><p><strong>7.1 Surround Sound Audio with Downmixing</strong><br>DM NVX supports the lossless transport of 7.1 surround sound audio signals, including Dolby® TrueHD, Dolby Atmos®, DTS-HD®, DTS:X®, and uncompressed linear PCM. The DM-NVX-351 includes the ability to decode the incoming multichannel surround sound signal, whether from the network or an HDMI input, and downmix that signal to stereo. The stereo downmix signal is automatically routed to the onboard analog output [4], while the HDMI output can be configured to output either stereo or multichannel. As an encoder, the DM-NVX-351 distributes both stereo and multichannel signals simultaneously over the network, allowing either signal to be selected at any decoder on the network.</p><p> </p><p><strong>Analog Audio Embedding or De-embedding </strong><br>A balanced stereo analog audio port is included, which may be configured as either an input or output. As an input, it allows a stereo audio source to be connected and combined with the video signal from either HDMI input or the incoming network video stream. As an output, it can provide a stereo line-level signal to feed a local sound system or sound bar. The output volume is adjustable via a control system or web browser.[5]</p><p> </p><p><strong>Breakaway Audio</strong><br>A DM NVX decoder may select and combine separate video and audio signals from two different inputs, even two different encoders. There are just two exceptions: A) signals may not be combined between the two onboard HDMI inputs, and B) combining signals from two separate encoders is limited to 2-channel stereo audio.[6,7]</p><p> </p><p><strong>Text Overlay</strong><br>The ability to display dynamic or fixed text on screen provides a means to label the video source or display special instructions, schedules, announcements, alerts, and other messaging.</p><p> </p><p><strong>Video Wall Processing</strong><br>A video wall composed of up to 64 individual displays can be configured using multiple DM-NVX-351 units. Each unit provides fully-adjustable zoom capability and bezel compensation to accommodate a range of video wall configurations and display types. One DM-NVX-351 is required per display, supporting configurations of up to eight wide by up to eight high.</p><p> </p><strong>Key Features</strong><br><ul><li>4K60 4:4:4 video over standard Gigabit Ethernet</li><li>No latency penalty for real-time video performance</li><li>HDR (High Dynamic Range) video support (HDR10)</li><li>Dolby® TrueHD, Dolby Atmos®, DTS-HD®, DTS:X®, and uncompressed 7.1 linear PCM audio support</li><li>HDCP 2.2 compliant</li><li>Configurable as an encoder or decoder</li><li>Dual onboard RJ45 LAN ports</li><li>Option for a fiber optic network connection via SFP port [2]</li><li>Enterprise-grade security</li><li>Two auto-switching HDMI® inputs and one HDMI output [1]</li><li>Built-in 4K60 4:4:4 scaling</li><li>Onboard video wall processing</li><li>Analog audio port configurable as a balanced stereo input or output [5]</li><li>Analog audio embedding or de-embedding</li><li>Stereo downmixing of surround sound audio signals</li><li>Simultaneous distribution of stereo and surround sound signals</li><li>Audio breakaway capability [6,7]</li><li>Dynamic text overlay capability</li><li>RS-232 and IR control ports [9]</li><li>CEC device control gateway [9]</li><li>USB and KVM signal extension and routing [4]</li><li>Easy setup via built-in webpages</li><li>Fully-controllable via a Crestron® control system</li><li>Compact, surface-mountable form factor</li><li>Powered via local power pack or optional power injector [8]</li><li>100-240V universal power pack included</li></ul> <p>1. 4K60 4:4:4 performance requires the use of HDMI cables with a minimum TMDS bandwidth of 18 Gbps, such as Crestron model CBL-HD (20 ft / 6.1 m max. length). If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables with a minimum bandwidth of 10.2 Gbps may be used, such as Crestron models CBL-HD-LOCK or CBL-HD (any available length). Performance may also be affected if an HDMI coupler is inserted in the HDMI signal path. Crestron coupling products (MP-WP-150, MP-WP-152, MPI-WP-150, or FTA-CP-HD-101) and cable retractors (CBLR2-HD) all have a specified bandwidth of 10.2 Gbps, and thus do not support 4K60 4:4:4. Please be aware that bandwidth loss is cumulative, so the combination of multiple components inserted inline may reduce performance.<br>2. To add a fiber optic LAN port requires the purchase of a Crestron SFP-1G series SFP transceiver module (sold separately). All LAN ports on the DM-NVX-351 are for connection to an Ethernet based AV network or device; they cannot be connected to the “DM” ports of other Crestron devices.<br>3. When in encoder mode, the HDMI output resolution is matched to the resolution of the encoded source.<br>4. The DM-NVX-351 can be configured to accept the connection of a USB device or a USB host, not both. Crestron DM NVX products are engineered to deliver maximum compatibility with the widest possible range of USB products. Crestron does not guarantee that all USB products are compatible with DM NVX products. DM NVX is compatible with Crestron USB-EXT-DM products, but is not compatible with the “USB HID only” signal extender technology found in other Crestron DM products.<br>5. The analog audio port can function as an input or output, not both.<br>6. Audio from one onboard HDMI input may not be combined with video from the other onboard HDMI input.<br>7. Combining audio from one encoder with video from another encoder utilizes the secondary 2-channel audio stream. Multichannel audio from one encoder cannot be combined with video from another encoder.<br>8. The DM-NVX-351 is powerable using the 24V power pack (included) or a DM-PSU-ULTRA-MIDSPAN (sold separately).<br>9. Device control via RS-232, IR, CEC, or Ethernet requires integration with a Crestron control system.<br>10. 3D video input signals are automatically converted to 2D.<br>11. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.</p>

<p></p> <p>The Crestron® DM-NVX-350C is a video encoder/decoder card that installs in one slot of a DMF-CI-8 card chassis. It is designed to function as either a transmitter or receiver with the ability to switch between the two modes programmatically via commands from a Crestron control system. Featuring simple web-based control and management, USB and KVM integration, and support for copper and fiber LAN connectivity, the DM-NVX-350C offers a one-stop solution for any-sized network AV installation.[2]</p><p> </p><p><strong>Real-Time 4K60 Video Distribution</strong><br>Engineered for demanding conference room and classroom applications, DM NVX ensures real-time, full-motion 4K60 video performance for the presentation of multimedia, videoconferencing, and live camera images. DM NVX employs high-quality JPEG 2000 encoding using a patent-pending technique that overlaps scaling and encoding latencies, achieving an ultra-low end-to-end latency of 30 ms at 60 fps, so on-screen functions such as mousing and game play are fluid and natural.</p><p> </p><p><strong>Encoder and Decoder in One</strong><br>In a single card, the DM-NVX-350C is configurable to operate as either a network AV encoder or decoder.</p> <ul><li>As an encoder, it allows the output of a switcher, computer, AirMedia® gateway, or other media source to be connected via HDMI® and then transmitted over the network.[1]</li><li>As a decoder, it receives the signal from a DM NVX encoder and feeds it to the input of a switcher or display device via the HDMI output. It can quickly and easily switch between multiple encoders on the network alongside locally-connected HDMI sources.[1]</li><li>The encoder/decoder mode can be switched on-the-fly via a control system to provide a versatile, cost-effective presentation switching solution.</li></ul><p><strong>2x1 HDMI® Auto-Switcher</strong></p><p>The DM-NVX-350C includes two HDMI inputs. Switching between the two inputs can be performed automatically using auto-switching mode, programmatically via a Crestron control system, or through a computer using a web browser.[1]</p><p> </p><p><strong>HDMI Output</strong><br>When configured as a decoder, the DM-NVX-350C’s HDMI output feeds the decoded signal to the input of a switcher, a local display device, or any other device with an HDMI input. Its built-in scaler ensures an optimal image, scaling the encoded source resolution up or down to match the native resolution of the display device. When used as an encoder, the HDMI output can be used to feed a local display, confidence monitor, or audio system.[1,3]</p><p> </p><p><strong>USB and KVM Integration</strong><br>For a complete signal management solution, DM NVX supports the extension of USB signals, which may be switched and routed alongside the AV signal or separately via the control system. USB 2.0 host and device ports are provided on each DM-NVX-350C card, allowing a USB mouse, keyboard, or other device to be connected at one DM NVX endpoint and routed to a computer or other host at any other endpoint. KVM switch functionality is a natural application for this feature, but all types of USB peripherals are supported including whiteboards, touch screens, game controllers, cameras, mobile devices, headsets, and flash drives.[4]</p> <p>USB signals can also be routed to other locations where a DM NVX endpoint does not exist using Crestron USB over Ethernet Extender Modules (USB-EXT-DM). USB signals can be freely routed between DM NVX and USB-EXT-DM units over Ethernet under the management of a Crestron control system.</p><p> </p><p><strong>7.1 Surround Sound Audio</strong><br>DM NVX supports the lossless transport of 7.1 surround sound audio signals, including Dolby® TrueHD, Dolby Atmos®, DTS-HD®, DTS:X®, and uncompressed linear PCM. In decoder mode, the DM-NVX-350C has the ability to receive both multichannel and 2-channel downmix signals from a DM-NVX-351 or DM-NVX-351C encoder, allowing either signal to be selected at the HDMI output while the 2-channel signal is automatically routed to the analog output.</p><p> </p><p><strong>Analog Audio Embedding or De-embedding</strong><br>A balanced stereo analog audio port is included, which may be configured as either an input or output. As an input, it allows a stereo audio source to be connected and combined with the video signal from either HDMI input or the incoming network video stream. As an output, it can provide a stereo line-level signal to feed a local sound system or analog audio switcher. The output volume is adjustable via a control system or web browser.[5]</p><p> </p><p><strong>Breakaway Audio</strong><br>A DM NVX decoder may select and combine separate video and audio signals from two different inputs, even two different encoders. There are just two exceptions: A) signals may not be combined between the two onboard HDMI inputs, and B) combining signals from two separate encoders is limited to 2-channel stereo audio.[6,7]</p><p> </p><p><strong>Text Overlay</strong><br>The ability to display dynamic or fixed text on screen provides a means to label the video source or display special instructions, schedules, announcements, alerts, and other messaging.</p><p> </p><p><strong>Video Wall Processing</strong><br>A video wall composed of up to 64 individual displays can be configured using multiple DM-NVX-350C cards. Each card provides fully-adjustable zoom capability and bezel compensation to accommodate a range of video wall configurations and display types. One DM-NVX-350C is required per display, supporting configurations of up to eight wide by up to eight high.</p><p> </p><p><strong>Key Features</strong></p><ul><li>4K60 4:4:4 video over standard Gigabit Ethernet</li><li>No latency penalty for real-time video performance</li><li>HDR (High Dynamic Range) video support (HDR10)</li><li>Dolby® TrueHD, Dolby Atmos®, DTS-HD®, DTS:X®, and uncompressed 7.1 linear PCM audio support</li><li>HDCP 2.2 compliant</li><li>Configurable as an encoder or decoder</li><li>Dual onboard RJ45 LAN ports</li><li>Option for a fiber optic network connection via SFP port [2]</li><li>Enterprise-grade security</li><li>Two auto-switching HDMI® inputs and one HDMI output [1]</li><li>Built-in 4K60 4:4:4 scaling</li><li>Onboard video wall processing</li><li>Analog audio port configurable as a balanced stereo input or output [5]</li><li>Analog audio embedding or de-embedding</li><li>Audio breakaway capability [6,7]</li><li>Dynamic text overlay capability</li><li>CEC device control gateway [8]</li><li>USB and KVM signal extension and routing [4]</li><li>Easy setup via built-in webpages</li><li>Fully-controllable via a Crestron® control system</li><li>Installs in the DMF-CI-8 card chassis</li></ul> <p>1. 4K60 4:4:4 performance requires the use of HDMI cables with a minimum TMDS bandwidth of 18 Gbps, such as Crestron model CBL-HD (20 ft / 6.1 m max. length). If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables with a minimum bandwidth of 10.2 Gbps may be used, such as Crestron models CBL-HD-LOCK or CBL-HD (any available length). Performance may also be affected if an HDMI coupler is inserted in the HDMI signal path. Crestron coupling products (MP-WP150, MP-WP152, MPI-WP150, or FTA-CP-HD-101) and cable retractors (CBLR2-HD) all have a specified bandwidth of 10.2 Gbps, and thus do not support 4K60 4:4:4. Please be aware that bandwidth loss is cumulative, so the combination of multiple components inserted inline may reduce performance.<br>2. To add a fiber optic LAN port requires the purchase of a Crestron SFP-1G series SFP transceiver module (sold separately). All LAN ports on the DM-NVX-350C are for connection to an Ethernet based AV network or device; they cannot be connected to the “DM” ports of other Crestron devices.<br>3. When in encoder mode, the HDMI output resolution is matched to the resolution of the encoded source.<br>4. The DM-NVX-350C can be configured to accept the connection of a USB device or a USB host, not both. Crestron DM NVX products are engineered to deliver maximum compatibility with the widest possible range of USB products. Crestron does not guarantee that all USB products are compatible with DM NVX products. DM NVX is compatible with Crestron USB-EXT-DM products, but is not compatible with the “USB HID only” signal extender technology found in other Crestron DM products.<br>5. The analog audio port can function as an input or output, not both. Analog audio output is only functional when the DM-NVX-350C is receiving a 2-channel stereo input signal. To derive a 2-channel downmix signal from a multichannel surround sound source, please refer to the Crestron DM-NVX-351 or DM-NVX-351C.<br>6. Audio from one onboard HDMI input may not be combined with video from the other onboard HDMI input.<br>7. Combining audio from one encoder with video from another encoder utilizes the secondary 2-channel audio stream. Multichannel audio from one encoder cannot be combined with video from another encoder.<br>8. Device control via CEC requires integration with a Crestron control system.<br>9. As an encoder, the DM-NVX-350C does not transmit audio via the secondary 2-channel stream except when it is receiving a 2-channel stereo input signal via the HDMI or analog inputs.<br>10. 3D video input signals are automatically converted to 2D.<br>11. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.</p>

<p>DigitalMedia™ NVX technology transports ultra high-definition 4K video with 60 Hz frame rates and 4:4:4 color sampling over standard Gigabit Ethernet. Support for HDR video (HDR10) and HDCP 2.2 ensures the ultimate in picture quality and compatibility for all of today’s varied media sources. Using standards-based Ethernet wiring and switches, DM® NVX delivers a vastly scalable, high-performance solution for enterprise-wide 4K content distribution.[1]</p> <p>The Crestron® DM-NVX-351C is a video encoder/decoder card that installs in one slot of a DMF-CI-8 card chassis. It is designed to function as either a transmitter or receiver with the ability to switch between the two modes programmatically via commands from a Crestron control system. Featuring simple web-based control and management, USB and KVM integration, and support for copper and fiber LAN connectivity, the DM-NVX-351C offers a one-stop solution for any-sized network AV installation.[2]</p> <p>The DM-NVX-351C includes all the features of the DM-NVX-350C with the addition of surround sound to stereo downmixing. Refer to the “7.1 Surround Sound Audio with Downmixing” section below for details.</p><p> </p><p><strong>Real-Time 4K60 Video Distribution</strong><br>Engineered for demanding conference room and classroom applications, DM NVX ensures real-time, full-motion 4K60 video performance for the presentation of multimedia, videoconferencing, and live camera images. DM NVX employs high-quality JPEG 2000 encoding using a patent-pending technique that overlaps scaling and encoding latencies, achieving an ultra-low end-to-end latency of 30 ms at 60 fps, so on-screen functions such as mousing and game play are fluid and natural.</p><p> </p><p><strong>Encoder and Decoder in One</strong><br>In a single card, the DM-NVX-351C is configurable to operate as either a network AV encoder or decoder.</p> <ul><li>As an encoder, it allows the output of a switcher, computer, AirMedia® gateway, or other media source to be connected via HDMI® and then transmitted over the network.[1]</li><li>As a decoder, it receives the signal from a DM NVX encoder and feeds it to the input of a switcher or display device via the HDMI output. It can quickly and easily switch between multiple encoders on the network alongside locally-connected HDMI sources.[1]</li><li>The encoder/decoder mode can be switched on-the-fly via a control system to provide a versatile, cost-effective presentation switching solution.</li></ul><p><strong>2x1 HDMI® Auto-Switcher </strong></p><p>The DM-NVX-351C includes two HDMI inputs. Switching between the two inputs can be performed automatically using auto-switching mode, programmatically via a Crestron control system, or through a computer using a web browser.[1]</p><p> </p><p><strong>HDMI Output</strong><br>When configured as a decoder, the DM-NVX-351C’s HDMI output feeds the decoded signal to the input of a switcher, a local display device, or any other device with an HDMI input. Its built-in scaler ensures an optimal image, scaling the encoded source resolution up or down to match the native resolution of the display device. When used as an encoder, the HDMI output can be used to feed a local display, confidence monitor, or audio system.[1,3]</p><p> </p><p><strong>USB and KVM Integration</strong><br>For a complete signal management solution, DM NVX supports the extension of USB signals, which may be switched and routed alongside the AV signal or separately via the control system. USB 2.0 host and device ports are provided on each DM-NVX-351C card, allowing a USB mouse, keyboard, or other device to be connected at one DM NVX endpoint and routed to a computer or other host at any other endpoint. KVM switch functionality is a natural application for this feature, but all types of USB peripherals are supported including whiteboards, touch screens, game controllers, cameras, mobile devices, headsets, and flash drives.[4]</p> <p>USB signals can also be routed to other locations where a DM NVX endpoint does not exist using Crestron USB over Ethernet Extender Modules (USB-EXT-DM). USB signals can be freely routed between DM NVX and USB-EXT-DM units over Ethernet under the management of a Crestron control system.</p><p> </p><p><strong>7.1 Surround Sound Audio with Downmixing</strong><br>DM NVX supports the lossless transport of 7.1 surround sound audio signals, including Dolby® TrueHD, Dolby Atmos®, DTS-HD®, DTS:X®, and uncompressed linear PCM. The DM-NVX-351C includes the ability to decode the incoming multichannel surround sound signal, whether from the network or an HDMI input, and downmix that signal to stereo. The stereo downmix signal is automatically routed to the onboard analog output [5], while the HDMI output can be configured to output either stereo or multichannel. As an encoder, the DM-NVX-351C distributes both stereo and multichannel signals simultaneously over the network, allowing either signal to be selected at any decoder on the network.</p><p> </p><p><strong>Analog Audio Embedding or De-embedding </strong><br>A balanced stereo analog audio port is included, which may be configured as either an input or output. As an input, it allows a stereo audio source to be connected and combined with the video signal from either HDMI input or the incoming network video stream. As an output, it can provide a stereo line-level signal to feed a local sound system or analog audio switcher. The output volume is adjustable via a control system or web browser.[5]</p><p> </p><p><strong>Breakaway Audio</strong><br>A DM NVX decoder may select and combine separate video and audio signals from two different inputs, even two different encoders. There are just two exceptions: A) signals may not be combined between the two onboard HDMI inputs, and B) combining signals from two separate encoders is limited to 2-channel stereo audio.[6,7]</p><p> </p><p><strong>Text Overlay</strong><br>The ability to display dynamic or fixed text on screen provides a means to label the video source or display special instructions, schedules, announcements, alerts, and other messaging.</p><p> </p><strong>Video Wall Processing</strong><br>A video wall composed of up to 64 individual displays can be configured using multiple DM-NVX-351C cards. Each card provides fully-adjustable zoom capability and bezel compensation to accommodate a range of video wall configurations and display types. One DM-NVX-351C is required per display, supporting configurations of up to eight wide by up to eight high.<br> <br><strong>Key Features</strong><br><ul><li>4K60 4:4:4 video over standard Gigabit Ethernet</li><li>No latency penalty for real-time video performance</li><li>HDR (High Dynamic Range) video support (HDR10)</li><li>Dolby® TrueHD, Dolby Atmos®, DTS-HD®, DTS:X®, and uncompressed 7.1 linear PCM audio support</li><li>HDCP 2.2 compliant</li><li>Configurable as an encoder or decoder</li><li>Dual onboard RJ45 LAN ports</li><li>Option for a fiber optic network connection via SFP port [2]</li><li>Enterprise-grade security</li><li>Two auto-switching HDMI® inputs and one HDMI output [1]</li><li>Built-in 4K60 4:4:4 scaling</li><li>Onboard video wall processing</li><li>Analog audio port configurable as a balanced stereo input or output [5]</li><li>Analog audio embedding or de-embedding</li><li>Stereo downmixing of surround sound audio signals</li><li>Simultaneous distribution of stereo and surround sound signals</li><li>Audio breakaway capability [6,7]</li><li>Dynamic text overlay capability</li><li>CEC device control gateway [8]</li><li>USB and KVM signal extension and routing [4]</li><li>Easy setup via built-in webpages</li><li>Fully-controllable via a Crestron® control system</li><li>Installs in the DMF-CI-8 card chassis</li></ul> <p>1. 4K60 4:4:4 performance requires the use of HDMI cables with a minimum TMDS bandwidth of 18 Gbps, such as Crestron model CBL-HD (20 ft / 6.1 m max. length). If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables with a minimum bandwidth of 10.2 Gbps may be used, such as Crestron models CBL-HD-LOCK or CBL-HD (any available length). Performance may also be affected if an HDMI coupler is inserted in the HDMI signal path. Crestron coupling products (MP-WP150, MP-WP152, MPI-WP150, or FTA-CP-HD-101) and cable retractors (CBLR2-HD) all have a specified bandwidth of 10.2 Gbps, and thus do not support 4K60 4:4:4. Please be aware that bandwidth loss is cumulative, so the combination of multiple components inserted inline may reduce performance.<br>2. To add a fiber optic LAN port requires the purchase of a Crestron SFP-1G series SFP transceiver module (sold separately). All LAN ports on the DM-NVX-351C are for connection to an Ethernet based AV network or device; they cannot be connected to the “DM” ports of other Crestron devices.<br>3. When in encoder mode, the HDMI output resolution is matched to the resolution of the encoded source.<br>4. The DM-NVX-351C can be configured to accept the connection of a USB device or a USB host, not both. Crestron DM NVX products are engineered to deliver maximum compatibility with the widest possible range of USB products. Crestron does not guarantee that all USB products are compatible with DM NVX products. DM NVX is compatible with Crestron USB-EXT-DM products, but is not compatible with the “USB HID only” signal extender technology found in other Crestron DM products.<br>5. The analog audio port can function as an input or output, not both.<br>6. Audio from one onboard HDMI input may not be combined with video from the other onboard HDMI input.<br>7. Combining audio from one encoder with video from another encoder utilizes the secondary 2-channel audio stream. Multichannel audio from one encoder cannot be combined with video from another encoder.<br>8. Device control via CEC requires integration with a Crestron control system.<br>9. 3D video input signals are automatically converted to 2D.<br>10. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.</p>

<p>The PC-100 is a professional grade, rack-mountable power conditioner designed to provide 120 Volt AC power distribution, switching, surge protection, and noise filtering for Crestron® control systems, AV systems, computers, and other equipment. Eight switched outlets are provided on the rear panel, plus a single unswitched convenience outlet is provided on the front. All nine outlets are protected and filtered. The switched outlets are arranged in four banks of two, two of which are turn-on delayed to prevent dangerous transients during power-up.<br><br></p><strong>Power Conditioning<br></strong>A quality power conditioner is an essential component of any professional system to prevent sudden equipment failure due to lightning and electrical disturbances, to prolong the lifespan of that equipment, and to maximize overall system performance during everyday operation. The PC-100 includes the following power conditioning features:<br><ul><li><strong>Surge Protection</strong> — Provides protection against surges and spikes in the AC power line caused by lightning and other electrical disturbances</li><li><strong>Under/Over Voltage Cutoff</strong> — Shuts off power to the rear panel outlets if the line voltage strays beyond the normal operating range</li><li><strong>Thermal Breaker</strong> — Disrupts power to all outlets in case of an overload condition</li><li><strong>EMI/RFI Noise Filtering</strong> — Prevents electromagnetic and radio frequency interference that can negatively impact sound and video quality</li><li><strong>Wiring Fault Detection</strong> — Detects faulty wiring of the incoming AC power line and shuts off power to the rear panel outlets until the fault is corrected [1]</li></ul><strong>Three-Stage Sequential Turn-On Delay</strong><br>The switched outlets on the PC-100’s rear panel are arranged in four banks, with two outlets per bank. When the front panel switch is turned on, or when power is applied to the main line input following a power outage or through an externally switched circuit, the first two banks of outlets turn on immediately, the third bank turns on following a one second delay, and the fourth bank turns on following a two second delay. This ensures that the connected equipment gets powered up in proper order, preventing dangerous transients that can damage delicate components and potentially trip the main circuit breaker. It can also help to prevent audible pops and thumps through connected audio equipment at power-up.<br><p><br></p><p><strong>Protection Status Output</strong></p>A contact closure output is included to provide notification to a control system or other equipment if the internal surge protection circuit is compromised due to an extreme transient voltage surge. In the unlikely event of such a condition, the PROTECTION output presents a low-voltage contact closure signal and all power to the rear panel outlets is switched off. Protection status is also indicated via LEDs on the front panel.<br><p><br></p><p><strong>UL® 1449 Certified</strong></p><p>The PC-100 has been tested and certified by UL as compliant with the UL 1449 safety and performance standard for surge protective devices (SPD).<br></p><p></p><p>  </p><p><strong>Key Features</strong></p><ul><li>Rack-mountable power conditioner</li><li>Eight switched rear panel outlets</li><li>Three-stage sequential turn-on delay</li><li>One unswitched front panel outlet</li><li>Professional grade surge protection</li><li>UL® 1449 Type 3 Listed</li><li>Thermal breaker overload protection</li><li>Over-voltage and under-voltage cutoff</li><li>EMI and RFI noise filtering</li><li>Wiring fault detection [1]</li><li>Front panel main power switch and status indicators</li><li>Protection status contact closure output</li><li>Single-space 19 inch rack-mountable</li><li>Rated 15 Amps at 120 Volts AC</li><li>Limited Lifetime Product Warranty</li><li>Limited 5 Year Connected Equipment Protection Warranty</li></ul><p>1. Detects most input line wiring faults. Does not detect neutral/ground reversal. Does not discern between ground connections at the AC power line, chassis, or connected equipment (a ground connection at any point will be detected by the PC-100 as normal). The installer is responsible for proper wiring and grounding of this and all connected equipment according to applicable electrical codes, accepted guidelines, and best practices. Proper wiring and function of the AC power source should be verified prior to connecting the PC-100 or any other equipment. Use of this product does not negate the responsibilities of the installer and end-user to exercise all appropriate and required measures for safe and reliable installation and operation.</p>

<p>The DMPS3-4K-150-C from Crestron® provides an ultra high-definition presentation switcher and control solution that’s perfect for huddle rooms, conference rooms, and classrooms. It integrates the control system, multi-format switcher, 4K video scaler, mic preamp, and audio DSP all into one compact device that mounts conveniently under a conference table or in an equipment rack. Built-in Crestron Connect It™ functionality affords a complete collaboration solution that’s easy and affordable to deploy in any small to medium sized meeting space. Without requiring any programming, the DMPS3-4K-150-C is easily configurable for a variety of media presentation applications.<br><br></p> <p>Auto-switching HDMI®, VGA, and analog audio inputs provide the essential connectivity needed to manage multiple computers and other media sources. A full-featured microphone input is also included for applications requiring high-quality speech reinforcement. The selected input source and microphone can be mixed and routed to one HDMI output and one stereo analog audio output. Additional DigitalMedia 8G+® inputs and output afford a streamlined, long-distance wiring solution for remote sources, for the display device, and for facility-wide integration as part of a larger media distribution system. Built-in 4K scaling ensures the highest possible image quality, and compatibility with the widest range of sources and displays.</p> <p><strong>4K Ultra HD<br></strong>The DMPS3-4K-150-C handles 4K and Ultra HD video signals, which is essential to ensure support for the latest generation of computers and monitors with native resolutions beyond 1080p and WUXGA.</p> <p><strong>Crestron Connect It™</strong><br></p> <p>Crestron Connect It is a cost-effective, simple-to-use presentation solution that provides tabletop BYOD connectivity and one-touch control for multiple participants around a conference table. Simply add up to four Crestron Connect It Cable Caddies (TT-100 series [1]) to the DMPS3-4K-150-C. Its auto-switching inputs support individual HDMI, VGA, and analog audio connections at each cable caddy. Four USB ports on the DMPS3-4K-150-C provide power and communications for each cable caddy.<br>A fully functional Crestron Connect It system is enabled right out of the box by simply connecting the cable caddies and input cables. Additional settings and AV adjustments are available through a simple web browser setup screen. In addition to the Crestron Connect It devices, the DMPS3-4K-150-C can also accommodate two DM® transmitters, one DM receiver, and an AirMedia® Presentation Gateway without any additional programming.[1,2]<br>No Programming Required!<br>Installing the DMPS3-4K-150-C is easy, fast, and affordable. Built-in .AV Framework™ technology delivers a fully-functional presentation system with simplified configuration and a choice of control options and other add-ons. For complete details on the capabilities supported by .AV Framework, please visit: www.crestron.com/avframework.[3]<br>  <br><strong>Key Features</strong></p><ul><li>Ultra high-definition, multi-format presentation switcher, scaler, mic preamp, audio DSP, and control system</li><li>Out of the box Crestron Connect It™ collaboration system functionality</li><li>Supports up to four TT-100 series Crestron Connect It Cable Caddies [1]</li><li>Built-in .AV Framework™ delivers a fully-functional system without any programming [3]</li><li>Integrated 3-Series Control System® allows fully-programmable room control</li><li>Includes four auto-switching HDMI®, VGA, and stereo analog audio inputs [6]</li><li>Includes two DM 8G+® inputs</li><li>Also supports Dual-Mode DisplayPort, DVI, HDBaseT®, and analog video sources [4,5]</li><li>Input auto-detection configures each input automatically</li><li>QuickSwitch HD™ technology manages HDCP keys for fast, reliable switching</li><li>Auto-Locking® technology achieves rapid switching between disparate sources</li><li>Performs automatic AV signal format management via EDID</li><li>Provides adjustable input level compensation on each audio input</li><li>Includes a single microphone input with EQ, gating, and compression</li><li>Provides parallel HDMI and DM 8G+ outputs for one or more display devices</li><li>DigitalMedia 8G+® connectivity enables long-distance wiring over CAT type twisted pair cable [9]</li><li>Integrates seamlessly with DigitalMedia™ matrix switchers to allow facility-wide signal distribution</li><li>HDBaseT Certified — Enables direct connection to other HDBaseT certified equipment</li><li>Features a built-in, high-performance 4K scaler</li><li>Upscales input signals to match the native resolution of any screen — including 4K and Ultra HD displays!</li><li>Downscales 4K, UHD, and ultra high-resolution computer signals to fit 1080p and other lower-resolution displays</li><li>Handles any input resolution from standard NTSC 480i or PAL 576i, to UHD and 4K</li><li>Provides intelligent frame rate conversion, content-adaptive noise reduction, and motion-adaptive de-interlacing</li><li>Provides 3D to 2D signal conversion, and passes 3D video (without scaling) to 3D displays [7]</li><li>Provides a balanced stereo audio output with graphic EQ, limiting, and delay</li><li>Enables analog-to-HDMI audio embedding and de-embedding [6]</li><li>Handles Dolby® TrueHD, Dolby Atmos®, DTS-HD®, and uncompressed 7.1 linear PCM audio [8]</li><li>Enables USB signal routing via DM transmitters and receivers or USB-EXT-DM extenders [10]</li><li>Includes onboard IR, RS-232, relay, digital input, and Cresnet® control ports</li><li>Supports Crestron® touch screens, keypads, and wireless remotes</li><li>Supports XPanel with Smart Graphics® computer and web based control</li><li>Supports iPhone®, iPad®, and Android™ control apps</li><li>Supports universal remotes via built-in RC-5 compatible IR receiver</li><li>Communicates natively with Crestron Fusion®</li><li>Enables IT-friendly network integration via SNMP</li><li>Integrated Ethernet switch provides a single-point LAN connection</li><li>Private Network Mode — requires just one IP address for the complete system</li><li>Includes front panel controls for switching and volume adjustment</li><li>Includes customizable front panel label strips</li><li>Allows complete AV setup and adjustment via a web browser</li><li>Features an internal universal power supply for worldwide compatibility</li><li>Furnishes power to PoDM and HDBaseT PoE powered devices</li><li>Mounts under the table or in a single 19” rack space</li></ul> <p>1. Item(s) sold separately.<br>2. The AirMedia Presentation Gateway, model AM-101, requires one HDMI input on the DMPS3-4K-150-C.<br>3. Some features and functions described in this spec sheet may not be supported using .AV Framework. For a complete list of capabilities and options supported by .AV Framework, please visit: www.crestron.com/avframework.<br>4. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.<br>5. The VGA inputs can accept component, composite, and S-Video signals using an appropriate adapter (not included). However, input sync detection is not provided for composite or S-Video signal types.<br>6. When using an analog audio input in combination with an HDMI video input, the source’s video resolution must be 1920x1200 or lower. The analog audio input will not pass audio if the source’s video resolution is higher than 1920x1200.<br>7. Automatically passes 3D video if the display device supports it (reverts to pass-through mode without scaling). Provides automatic 3D-to-2D conversion (with scaling) if the display device does not support 3D.<br>8. Routing of a multichannel audio signal via a digital input and output (HDMI or DM) requires the input to be set for “mixer bypass” mode. When that input is selected, all audio controls on the digital output are disabled and the ability to route the microphone signal to that output is defeated. Mixer bypass mode also disables the Input Compensation control on that input.<br>9. The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “DM 8G+ & HDBaseT Maximum Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.<br>10. Manages the routing of USB HID signals between peripheral DM devices that are equipped with USB HID ports. The USB ports onboard the DMPS3-4K-150-C are not usable for USB signal routing. Also programmable to manage the routing of USB signals between Crestron USB over Ethernet Extender modules (USB-EXT-DM, sold separately). Refer to the USB-EXT-DM spec sheet for more information.<br>11. License required. The DMPS3-4K-150-C supports a maximum of 500 BACnet objects when dedicated for BACnet use only. Actual capabilities are contingent upon the overall program size and complexity.<br>12. Due to the inherent power loss that occurs over CATx cable, a maximum of 12.95 Watts is delivered at each PoDM or HDBaseT PoE powered device. Any wiring that is connected to a PoDM or HDBaseT PoE PSE port is for intra-building use only and should not be connected to a line that runs outside of the building in which the PSE is located.</p> <p></p>

<p>The DMPS3-4K-50 from Crestron® provides an ultra high-definition presentation switcher and control solution that’s perfect for huddle rooms, conference rooms, and classrooms. It integrates the control system, multi-format switcher, 4K video scaler, and audio DSP all into one compact device that mounts conveniently under a conference table or in an equipment rack. Built-in Crestron Connect It™ functionality affords a complete collaboration solution that’s easy and affordable to deploy in any small to medium sized meeting space. Without requiring any programming, the DMPS3-4K-50 is easily configurable for a variety of media presentation applications.</p><p>Auto-switching HDMI®, VGA, and analog audio inputs provide the essential connectivity needed to manage multiple computers and other media sources. The selected input source is routed to one HDMI output and one stereo analog audio output. Built-in 4K scaling ensures the highest possible image quality, and compatibility with the widest range of sources and displays.<br><br></p><p><strong>4K Ultra HD</strong><br>The DMPS3-4K-50 handles 4K and Ultra HD video signals, which is essential to ensure support for the latest generation of computers and monitors with native resolutions beyond 1080p and WUXGA.<br><br></p><p><strong>Crestron Connect It™<br></strong>Crestron Connect It is a cost-effective, simple-to-use presentation solution that provides tabletop BYOD connectivity and one-touch control for multiple participants around a conference table. Simply add up to four Crestron Connect It Cable Caddies (TT-100 series [1]) to the DMPS3-4K-50. Its auto-switching inputs support individual HDMI, VGA, and analog audio connections at each cable caddy. Four USB ports on the DMPS3-4K-50 provide power and communications for each cable caddy.<br>A fully functional Crestron Connect It system is enabled right out of the box by simply connecting the cable caddies and input cables. Additional settings and AV adjustments are available through a simple web browser setup screen. In addition to the Crestron Connect It devices, the DMPS3-4K-50 can also accommodate an AirMedia® Presentation Gateway without any additional programming.[2]<br><br></p><p><strong>No Programming Required!<br></strong>Installing the DMPS3-4K-50 is easy, fast, and affordable. Built-in .AV Framework™ technology delivers a fully-functional presentation system with simplified configuration and a choice of control options and other add-ons. For complete details on the capabilities supported by .AV Framework, please visit: www.crestron.com/avframework.[3]<br><br></p><p><strong>Multi-Format Auto-Switcher<br></strong>The DMPS3-4K-50 provides high-performance automatic switching between four groups of inputs, each including HDMI, VGA, and unbalanced stereo audio. The HDMI inputs are compatible with DVI and Dual-Mode DisplayPort sources, and the VGA inputs can handled RGB, composite, S-Video, and component video sources. Digital audio is supported by the HDMI inputs, plus each analog audio input may be used in combination with its corresponding VGA or HDMI video input. Input auto-detection eliminates the need to configure the inputs – simply connect your source and the DMPS3-4K-50 selects the right audio and video combination.[4,5,6]<br><br></p><p><strong>4K Scaler<br></strong>With its high-performance 4K video scaler on board, the DMPS3-4K-50 ensures an optimal image from every video source. It allows all types of video and computer sources to be viewed reliably and look their best on any display up to 4K. It accepts any input resolution, from standard definition NTSC 480i to ultra high-definition DCI 4K, and scales it perfectly to match the native resolution of any screen up to DCI 4K (4096 x 2160). Interlaced sources are converted to progressive scan using motion-adaptive deinterlacing. Intelligent frame rate conversion enables support for 24p and PAL format sources. And, 3D to 2D conversion allows 3D content to be viewed on 2D-only displays.[7]<br><br></p><p><strong>Flexible Audio Outputs<br></strong>The switched audio signal is routed to the HDMI output as well as to a separate balanced analog audio output, with individual level adjustments provided for each output. All inputs and outputs support stereo audio, with the option to configure the analog output for mono. Dolby® TrueHD, Dolby Atmos®, DTS-HD®, and 7.1 linear PCM audio signals can also be routed through the HDMI inputs and output.[8]<br><br></p><p><strong>Professional Audio DSP</strong><br>The analog audio output includes professional digital signal processing, allowing the signal to be adjusted for optimum performance and sound quality. The analog output is ideally designed to be connected to an external power amplifier and used to drive a set of ceiling or wall mount speakers. In addition to volume, bass, treble, and mute controls, the DSP provides 10-band graphic equalization, fully-adjustable limiting, and up to 80 ms of delay. All settings are adjustable using the DMPS3-4K-50’s web browser user interface for easy setup. The output volume level is also adjustable using the front panel volume knob.<br><br></p><p><strong>EDID Format Management<br></strong>The DMPS3-4K-50 provides comprehensive management of the EDID (Extended Display Identification Data) information that passes between display devices and input sources, ensuring that each source gets displayed at its optimal resolution and format. Most applications require no changes to the default settings. For applications requiring custom configuration, the DMPS3-4K-50 allows for easy assessment of each device’s format and resolution capabilities, with the ability to configure signals appropriately for the most desirable and predictable behavior.<br><br></p><p>  <strong>Key Features</strong></p><ul><li>Ultra high-definition, multi-format presentation switcher, scaler, audio DSP, and control system</li><li>Out of the box Crestron Connect It™ collaboration system functionality</li><li>Supports up to four TT-100 series Crestron Connect It Cable Caddies [1]</li><li>Built-in .AV Framework™ delivers a fully-functional system without any programming [3]</li><li>Integrated 3-Series Control System® allows fully-programmable room control</li><li>Includes four auto-switching HDMI®, VGA, and stereo analog audio inputs [6]</li><li>Also supports Dual-Mode DisplayPort, DVI, and analog video sources [4,5]</li><li>Input auto-detection configures each input automatically</li><li>QuickSwitch HD™ technology manages HDCP keys for fast, reliable switching</li><li>Performs automatic AV signal format management via EDID</li><li>Provides adjustable input level compensation on each audio input</li><li>Provides a single HDMI output</li><li>Features a built-in, high-performance 4K scaler</li><li>Upscales input signals to match the native resolution of any screen — including 4K and Ultra HD displays!</li><li>Downscales 4K, UHD, and ultra high-resolution computer signals to fit 1080p and other lower-resolution displays</li><li>Handles any input resolution from standard NTSC 480i or PAL 576i, to UHD and 4K</li><li>Provides intelligent frame rate conversion, content-adaptive noise reduction, and motion-adaptive de-interlacing</li><li>Provides 3D to 2D signal conversion, and passes 3D video (without scaling) to 3D displays [7]</li><li>Provides a balanced stereo audio output with graphic EQ, limiting, and delay</li><li>Enables analog-to-HDMI audio embedding and de-embedding [6]</li><li>Handles Dolby® TrueHD, Dolby Atmos®, DTS-HD®, and uncompressed 7.1 linear PCM audio [8]</li><li>Includes onboard IR, RS-232, and Cresnet® control ports</li><li>Supports Crestron® touch screens, keypads, and wireless remotes</li><li>Supports XPanel with Smart Graphics® computer and web based control</li><li>Supports iPhone®, iPad®, and Android™ control apps</li><li>Supports universal remotes via built-in RC-5 compatible IR receiver</li><li>Communicates natively with Crestron Fusion®</li><li>Enables IT-friendly network integration via SNMP</li><li>Includes front panel controls for switching and volume adjustment</li><li>Includes customizable front panel label strips</li><li>Allows complete AV setup and adjustment via a web browser</li><li>Features an internal universal power supply for worldwide compatibility</li><li>Mounts under the table or in a single 19” rack space</li></ul> <p>1. Item(s) sold separately.<br>2. The AirMedia Presentation Gateway, model AM-101 (sold separately), requires one HDMI input on the DMPS3-4K-50.<br>3. Some features and functions described in this spec sheet may not be supported using .AV Framework. For a complete list of capabilities and options supported by .AV Framework, please visit: www.crestron.com/avframework.<br>4. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.<br>5. The VGA inputs can accept component, composite, and S-Video signals using an appropriate adapter (not included). However, input sync detection is not provided for composite or S-Video signal types.<br>6. When using an analog audio input in combination with an HDMI video input, the source’s video resolution must be 1920x1200 or lower. The analog audio input will not pass audio if the source’s video resolution is higher than 1920x1200.<br>7. Automatically passes 3D video if the display device supports it (reverts to pass-through mode without scaling). Provides automatic 3D-to-2D conversion (with scaling) if the display device does not support 3D.<br>8. Routing of a multichannel audio signal via a digital input and output requires the input to be set for “mixer bypass” mode. When that input is selected, all audio controls on the digital output are disabled. Mixer bypass mode also disables the Input Compensation control on that input.<br>9. License required. The DMPS3-4K-50 supports a maximum of 500 BACnet objects when dedicated for BACnet use only. Actual capabilities are contingent upon the overall program size and complexity.</p>

<p>The DMPS3-4K-100-C from Crestron® provides an ultra high-definition presentation switcher and control solution that’s perfect for huddle rooms, conference rooms, and classrooms. It integrates the control system, multi-format switcher, 4K video scaler, mic preamp, and audio DSP all into one compact device that mounts conveniently under a conference table or in an equipment rack. Built-in Crestron Connect It™ functionality affords a complete collaboration solution that’s easy and affordable to deploy in any small to medium sized meeting space. Without requiring any programming, the DMPS3-4K-100-C is easily configurable for a variety of media presentation applications.<br></p> <p>Auto-switching HDMI®, VGA, and analog audio inputs provide the essential connectivity needed to manage multiple computers and other media sources. A full-featured microphone input is also included for applications requiring high-quality speech reinforcement. The selected input source and microphone can be mixed and routed to one HDMI output and one stereo analog audio output. Additionally, its DigitalMedia 8G+® output affords a streamlined, long-distance wiring solution for the display device, and for facility-wide integration as part of a larger media distribution system. Built-in 4K scaling ensures the highest possible image quality, and compatibility with the widest range of sources and displays.<br><br></p> <p><strong>4K Ultra HD<br></strong>The DMPS3-4K-100-C handles 4K and Ultra HD video signals, which is essential to ensure support for the latest generation of computers and monitors with native resolutions beyond 1080p and WUXGA.<br><br></p> <p><strong>Crestron Connect It™<br></strong>Crestron Connect It is a cost-effective, simple-to-use presentation solution that provides tabletop BYOD connectivity and one-touch control for multiple participants around a conference table. Simply add up to four Crestron Connect It Cable Caddies (TT-100 series [1]) to the DMPS3-4K-100-C. Its auto-switching inputs support individual HDMI, VGA, and analog audio connections at each cable caddy. Four USB ports on the DMPS3-4K-100-C provide power and communications for each cable caddy.<br>A fully functional Crestron Connect It system is enabled right out of the box by simply connecting the cable caddies and input cables. Additional settings and AV adjustments are available through a simple web browser setup screen. In addition to the Crestron Connect It devices, the DMPS3-4K-100-C can also accommodate a single DM® receiver and an AirMedia® Presentation Gateway without any additional programming.[1,2]<br><br></p> <p><strong>No Programming Required!</strong><br>Installing the DMPS3-4K-100-C is easy, fast, and affordable. Built-in .AV Framework™ technology delivers a fully-functional presentation system with simplified configuration and a choice of control options and other add-ons. .[3]<br><br></p> <p><strong>Multi-Format Auto-Switcher</strong><br>The DMPS3-4K-100-C provides high-performance automatic switching between four groups of inputs, each including HDMI, VGA, and unbalanced stereo audio. The HDMI inputs are compatible with DVI and Dual-Mode DisplayPort sources, and the VGA inputs can handled RGB, composite, S-Video, and component video sources. Digital audio is supported by the HDMI inputs, plus each analog audio input may be used in combination with its corresponding VGA or HDMI video input. Input auto-detection eliminates the need to configure the inputs – simply connect your source and the DMPS3-4K-100-C selects the right audio and video combination. The switched video signal is routed to one HDMI output and one DM 8G+® output simultaneously. The DM 8G+ output is compatible with HDBaseT®.[4,5,6]<br>  </p><p><strong>Key Features</strong></p> <ul><li>Ultra high-definition, multi-format presentation switcher, scaler, mic preamp, audio DSP, and control system</li><li>Out of the box Crestron Connect It™ collaboration system functionality</li><li>Supports up to four TT-100 series Crestron Connect It Cable Caddies [1]</li><li>Built-in .AV Framework™ delivers a fully-functional system without any programming [3]</li><li>Integrated 3-Series Control System® allows fully-programmable room control</li><li>Includes four auto-switching HDMI®, VGA, and stereo analog audio inputs [6]</li><li>Also supports Dual-Mode DisplayPort, DVI, and analog video sources [4,5]</li><li>Input auto-detection configures each input automatically</li><li>QuickSwitch HD™ technology manages HDCP keys for fast, reliable switching</li><li>Auto-Locking® technology achieves rapid switching between disparate sources</li><li>Performs automatic AV signal format management via EDID</li><li>Provides adjustable input level compensation on each audio input</li><li>Includes a single microphone input with EQ, gating, and compression</li><li>Provides parallel HDMI and DM 8G+® outputs for one or more display devices</li><li>DigitalMedia 8G+® connectivity enables long-distance wiring over CAT type twisted pair cable [9]</li><li>Integrates seamlessly with DigitalMedia™ matrix switchers to allow facility-wide signal distribution</li><li>HDBaseT® Certified — Enables direct connection to an HDBaseT certified display device</li><li>Features a built-in, high-performance 4K scaler</li><li>Upscales input signals to match the native resolution of any screen — including 4K and Ultra HD displays!</li><li>Downscales 4K, UHD, and ultra high-resolution computer signals to fit 1080p and other lower-resolution displays</li><li>Handles any input resolution from standard NTSC 480i or PAL 576i, to UHD and 4K</li><li>Provides intelligent frame rate conversion, content-adaptive noise reduction, and motion-adaptive de-interlacing</li><li>Provides 3D to 2D signal conversion, and passes 3D video (without scaling) to 3D displays [7]</li><li>Provides a balanced stereo audio output with graphic EQ, limiting, and delay</li><li>Enables analog-to-HDMI audio embedding and de-embedding [6]</li><li>Handles Dolby® TrueHD, Dolby Atmos®, DTS-HD®, and uncompressed 7.1 linear PCM audio [8]</li><li>Includes onboard IR, RS-232, and Cresnet® control ports</li><li>Supports Crestron® touch screens, keypads, and wireless remotes</li><li>Supports XPanel with Smart Graphics® computer and web based control</li><li>Supports iPhone®, iPad®, and Android™ control apps</li><li>Supports universal remotes via built-in RC-5 compatible IR receiver</li><li>Communicates natively with Crestron Fusion®</li><li>Enables IT-friendly network integration via SNMP</li><li>Integrated Ethernet switch provides a single-point LAN connection</li><li>Private Network Mode — requires just one IP address for the complete system</li><li>Includes front panel controls for switching and volume adjustment</li><li>Includes customizable front panel label strips</li><li>Allows complete AV setup and adjustment via a web browser</li><li>Features an internal universal power supply for worldwide compatibility</li><li>Furnishes power to PoDM and HDBaseT PoE powered devices</li><li>Mounts under the table or in a single 19” rack space</li></ul> <p>1. Item(s) sold separately.<br>2. The AirMedia Presentation Gateway, model AM-101, requires one HDMI input on the DMPS3-4K-100-C.<br>3. Some features and functions described in this spec sheet may not be supported using .AV Framework. For a complete list of capabilities and options supported by .AV Framework, please visit: www.crestron.com/avframework.<br>4. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.<br>5. The VGA inputs can accept component, composite, and S-Video signals using an appropriate adapter (not included). However, input sync detection is not provided for composite or S-Video signal types.<br>6. When using an analog audio input in combination with an HDMI video input, the source’s video resolution must be 1920x1200 or lower. The analog audio input will not pass audio if the source’s video resolution is higher than 1920x1200.<br>7. Automatically passes 3D video if the display device supports it (reverts to pass-through mode without scaling). Provides automatic 3D-to-2D conversion (with scaling) if the display device does not support 3D.<br>8. Routing of a multichannel audio signal via a digital input and output (HDMI or DM) requires the input to be set for “mixer bypass” mode. When that input is selected, all audio controls on the digital output are disabled and the ability to route the microphone signal to that output is defeated. Mixer bypass mode also disables the Input Compensation control on that input.<br>9. The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “DM 8G+ & HDBaseT Maximum Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.<br>10. License required. The DMPS3-4K-100-C supports a maximum of 500 BACnet objects when dedicated for BACnet use only. Actual capabilities are contingent upon the overall program size and complexity.<br>11. Due to the inherent power loss that occurs over CATx cable, a maximum of 12.95 Watts is delivered at the PoDM or HDBaseT PoE powered device. Any wiring that is connected to a PoDM or HDBaseT PoE PSE port is for intra-building use only and should not be connected to a line that runs outside of the building in which the PSE is located.</p>

<p>The DMPS3-4K-250-C from Crestron® offers an all-in-one 4K AV presentation system for classrooms, boardrooms, lecture halls, and videoconference rooms. Delivering a complete, custom-programmable room solution with fully-configurable signal routing and processing is easy and cost-effective using the DMPS3-4K-250-C. In one 3-space rack mount package, it integrates the control system, matrix switcher, video scaler, streaming decoder, mic mixer, audio DSP, and amplifier. Its built-in AirMedia® gateway, when activated [1], enables wireless presentation from computers and mobile devices. DigitalMedia 8G+® and HDBaseT® connectivity affords a streamlined, long-distance wiring solution for remote sources and display devices, and for facility-wide integration as part of a larger media distribution system.</p><p>Note: To purchase the DMPS3-4K-250-C with AirMedia pre-activated (no license required), see model DMPS3-4K-250-C-AIRMEDIA.<br>4K Ultra HD<br>Crestron DigitalMedia™ continues to advance the standard for digital AV signal management, delivering the most complete end-to-end 4K system solutions available. The DMPS3-4K-250-C handles 4K/60 video with HDCP 2.2 encryption, ensuring support for all the latest 4K and Ultra HD displays and media sources. Support for 4K is also essential to support the latest generation of computers and monitors with native resolutions beyond 1080p and WUXGA.<br> <br><strong>No Programming Required!<br></strong>Installing the DMPS3-4K-250-C is easy, fast, and affordable. Built-in .AV Framework™ technology delivers a fully-functional presentation system with simplified configuration and a choice of control options and other add-ons. For complete details on the capabilities supported by .AV Framework, please visit: http://www.crestron.com/avframework.[2]<br> <br><strong>AirMedia® Wireless Presentation [1]<br></strong>Built-in AirMedia technology allows for wireless presentation of content from a laptop, smartphone, or tablet device via a Wi-Fi® wireless network. With AirMedia, anyone can walk into the room with a Windows® or MacBook® laptop and connect without wires, enabling the presentation of any content including Full HD video at frame rates up to 30 fps. iPhone®, iPad®, and Android™ devices can present PowerPoint®, Excel®, Word, and PDF documents, as well as pictures, videos, or any app content with full-screen mirroring. AirMedia lets up to 32 participants connect at once, switching from one to the next for seamless collaboration on the fly.[1]<br><br></p><strong>HD Streaming Video<br></strong>Its onboard streaming decoder enables the DMPS3-4K-250-C to receive a high-definition AV signal over the network or internet from a DigitalMedia switcher, IP camera, or streaming encoder (Crestron DM-TXRX-100-STR or similar). H.264 and MJPEG streaming formats are supported with resolutions up to HD 1080p and bitrates up to 25 Mbps. High-quality AAC audio decoding is employed to handle 2-channel stereo audio with full frequency response.[3]<br>  <br><p><strong>Key Features</strong></p><ul><li>Ultra high-definition 8x2 system switcher, scaler, mic mixer, audio DSP, amplifier, and control system</li><li>Built-in .AV Framework™ delivers a fully-functional system without any programming [2]</li><li>Integrated 3-Series Control System® allows fully-programmable room control</li><li>Onboard AirMedia® gateway enables wireless BYOD presentation capability [1]</li><li>Built-in H.264 streaming video decoder [3]</li><li>Provides matrix signal routing for up to 8 video sources and 2 displays</li><li>Handles video resolutions up to 4K DCI and Ultra HD</li><li>Includes HDMI®, DM 8G+®, and balanced stereo analog audio inputs</li><li>Also supports Dual-Mode DisplayPort, DVI, and HDBaseT® sources [4]</li><li>QuickSwitch HD™ technology manages HDCP keys for fast, reliable switching</li><li>Auto-Locking® technology achieves rapid switching between disparate sources</li><li>Performs automatic AV signal format management via EDID</li><li>HDCP 2.2 compliant</li><li>Provides adjustable input level compensation on each audio input</li><li>Includes built-in 6-channel gated microphone mixing with DSP</li><li>Provides one HDMI output and one DM 8G+ (HDBaseT compatible) output</li><li>DigitalMedia 8G+® connectivity enables long-distance wiring over CAT type twisted pair cable [7]</li><li>HDBaseT Certified — Enables direct connection to other HDBaseT certified equipment</li><li>Features a high-performance 4K scaler on the HDMI output</li><li>Upscales input signals to match the native resolution of any screen — including 4K and Ultra HD displays!</li><li>Downscales 4K, UHD, and ultra high-resolution computer signals to fit 1080p and other lower-resolution displays</li><li>Handles any input resolution from standard NTSC 480i or PAL 576i, to UHD and 4K</li><li>Provides intelligent frame rate conversion, content-adaptive noise reduction, and motion-adaptive de-interlacing</li><li>Provides 3D to 2D signal conversion [5]</li><li>Provides three balanced stereo audio outputs, each with independent mixer and DSP</li><li>Provides two additional audio mixes, either of which is selectable at either digital output</li><li>Features a built-in amplifier, selectable for 25W/Ch. @ 8Ω stereo or 50W @ 70/100 Volts mono</li><li>Enables analog-to-HDMI audio embedding and de-embedding</li><li>Enables USB signal routing via DM® transmitters and receivers or USB-EXT-DM series extenders [9]</li><li>Includes onboard IR, RS-232, relay, digital input, and Cresnet® control ports</li><li>Supports Crestron® touch screens, keypads, and wireless remotes</li><li>Supports XPanel with Smart Graphics® computer and web based control</li><li>Supports iPhone®, iPad®, and Android™ control apps</li><li>Supports universal remotes via external RC-5 compatible IR receiver [6]</li><li>Communicates natively with Crestron Fusion®</li><li>Enables IT-friendly network integration via SNMP</li><li>Integrated Ethernet switch provides a single-point LAN connection</li><li>Control Subnet — provides a dedicated local network for Crestron devices</li><li>Private Network Mode — requires just one IP address for the complete system</li><li>Content LAN port allows streaming and AirMedia traffic to be isolated on a secondary network</li><li>Includes front panel controls for basic configuration, diagnostics, and signal routing</li><li>Includes customizable front panel label strips and LCD display</li><li>Allows advanced setup and adjustment via a web browser</li><li>Features an internal universal power supply for worldwide compatibility</li><li>Furnishes power to PoDM+ and HDBaseT PoE+ powered devices [8]</li><li>3-space 19-inch rack-mountable</li></ul> <p>1. To enable the onboard AirMedia gateway requires the purchase of one SW-DMPS3-AIRMEDIA license. To obtain the license or for any questions regarding AirMedia activation, please visit https://www.crestron.com/dmps-airmedia-activation. To purchase the DMPS3-4K-250-C with AirMedia pre-activated (no license required), see model DMPS3-4K-250-C-AIRMEDIA. Wireless presentation using AirMedia requires an external wireless access point (not included). A wired Ethernet connection may also be used. AirMedia network traffic can be routed through the primary LAN port or isolated through the CONTENT LAN port. Performance quality for full-motion video content is dependent upon network performance and sending device performance. AirMedia support in the DMPS3-4K-250-C includes the same essential functionality as the AM-101 AirMedia Presentation Gateway with the exclusion of quad view, moderator mode, and remote view.<br>2. Some features and functions described in this spec sheet may not be supported using .AV Framework. For a complete list of capabilities and options supported by .AV Framework, please visit: http://www.crestron.com/avframework.<br>3. The streaming and AirMedia inputs are mutually exclusive. Only one or the other can be used at one time. Streaming network traffic can be routed through the primary LAN port or isolated through the CONTENT LAN port.<br>4. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.<br>5. The HDMI output does not pass 3D signals. On this output, 3D signals are automatically converted to 2D, then scaled and output as 2D. 3D signals can be passed through the DM 8G+ output.<br>6. Item(s) sold separately.<br>7. The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “Maximum DM 8G+ Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.<br>8. Enabling PoDM and PoE power sourcing requires an external power supply, model PW-4830DUS or DM-PSU-3X8-RPS, sold separately. Due to the inherent power loss that occurs over CATx cable, a maximum of 25.5 Watts is delivered at each PoDM+ or HDBaseT PoE+ powered device. Be aware that the CONTROL SUBNET port is limited to regular PoE (Class 0-3), which delivers a maximum of 12.95 Watts to the powered device. Any wiring that is connected to a PoDM or PoE PSE port is for intra-building use only and should not be connected to a line that runs outside of the building in which the PSE is located.<br>9. Manages the routing of USB HID signals between peripheral DM devices that are equipped with USB HID ports. The USB ports onboard the DMPS3-4K-250-C are not usable for USB signal routing. Also programmable to manage the routing of USB signals between Crestron USB over Ethernet Extender modules (USB-EXT-DM, sold separately). Refer to the USB-EXT-DM spec sheet for more information.<br>10. License required. The DMPS3-4K-250-C supports a maximum of 500 BACnet objects when dedicated for BACnet use only. Actual capabilities are contingent upon the overall program size and complexity.</p>

<p>The DMPS3-4K-350-C from Crestron® offers an all-in-one 4K AV presentation system for classrooms, boardrooms, lecture halls, and videoconference rooms. Delivering a complete, custom-programmable room solution with fully-configurable signal routing and processing is easy and cost-effective using the DMPS3-4K-350-C. In one 3-space rack mount package, it integrates the control system, matrix switcher, video scalers, streaming decoder, mic mixer, audio DSP, and amplifier. Its built-in AirMedia® gateway, when activated [1], enables wireless presentation from computers and mobile devices. DigitalMedia 8G+® and HDBaseT® connectivity affords a streamlined, long-distance wiring solution for remote sources and display devices, and for facility-wide integration as part of a larger media distribution system.</p><p>Note: To purchase the DMPS3-4K-350-C with AirMedia pre-activated (no license required), see model DMPS3-4K-350-C-AIRMEDIA.<br>4K Ultra HD<br>Crestron DigitalMedia™ continues to advance the standard for digital AV signal management, delivering the most complete end-to-end 4K system solutions available. The DMPS3-4K-350-C handles 4K/60 video with HDCP 2.2 encryption, ensuring support for all the latest 4K and Ultra HD displays and media sources. Support for 4K is also essential to support the latest generation of computers and monitors with native resolutions beyond 1080p and WUXGA.<br> <br><strong>No Programming Required!</strong><br>Installing the DMPS3-4K-350-C is easy, fast, and affordable. Built-in .AV Framework™ technology delivers a fully-functional presentation system with simplified configuration and a choice of control options and other add-ons. For complete details on the capabilities supported by .AV Framework, please visit: http://www.crestron.com/avframework.[2]<br> <br><strong>AirMedia® Wireless Presentation [1]</strong><br>Built-in AirMedia technology allows for wireless presentation of content from a laptop, smartphone, or tablet device via a Wi-Fi® wireless network. With AirMedia, anyone can walk into the room with a Windows® or MacBook® laptop and connect without wires, enabling the presentation of any content including Full HD video at frame rates up to 30 fps. iPhone®, iPad®, and Android™ devices can present PowerPoint®, Excel®, Word, and PDF documents, as well as pictures, videos, or any app content with full-screen mirroring. AirMedia lets up to 32 participants connect at once, switching from one to the next for seamless collaboration on the fly.[1]<br><br></p><strong>HD Streaming Video</strong><br>Its onboard streaming decoder enables the DMPS3-4K-350-C to receive a high-definition AV signal over the network or internet from a DigitalMedia switcher, IP camera, or streaming encoder (Crestron DM-TXRX-100-STR or similar). H.264 and MJPEG streaming formats are supported with resolutions up to HD 1080p and bitrates up to 25 Mbps. High-quality AAC audio decoding is employed to handle 2-channel stereo audio with full frequency response.[3]<br>  <br><p><strong>Key Features</strong></p><ul><li>Ultra high-definition 9x4 system switcher, scaler, mic mixer, audio DSP, amplifier, and control system</li><li>Built-in .AV Framework™ delivers a fully-functional system without any programming [2]</li><li>Integrated 3-Series Control System® allows fully-programmable room control</li><li>Onboard AirMedia® gateway enables wireless BYOD presentation capability [1]</li><li>Built-in H.264 streaming video decoder [3]</li><li>Provides matrix signal routing for up to 9 video sources and 4 displays</li><li>Handles video resolutions up to 4K DCI and Ultra HD</li><li>Includes HDMI®, DM 8G+®, and balanced stereo analog audio inputs</li><li>Also supports Dual-Mode DisplayPort, DVI, and HDBaseT® sources [4]</li><li>QuickSwitch HD™ technology manages HDCP keys for fast, reliable switching</li><li>Auto-Locking® technology achieves rapid switching between disparate sources</li><li>Performs automatic AV signal format management via EDID</li><li>HDCP 2.2 compliant</li><li>Provides adjustable input level compensation on each audio input</li><li>Includes built-in 6-channel gated microphone mixing with DSP</li><li>Provides two HDMI and two DM 8G+ (HDBaseT compatible) outputs</li><li>DigitalMedia 8G+® connectivity enables long-distance wiring over CAT type twisted pair cable [7]</li><li>HDBaseT Certified — Enables direct connection to other HDBaseT certified equipment</li><li>Features an independent, high-performance 4K scaler at each HDMI output</li><li>Upscales input signals to match the native resolution of any screen — including 4K and Ultra HD displays!</li><li>Downscales 4K, UHD, and ultra high-resolution computer signals to fit 1080p and other lower-resolution displays</li><li>Handles any input resolution from standard NTSC 480i or PAL 576i, to UHD and 4K</li><li>Provides intelligent frame rate conversion, content-adaptive noise reduction, and motion-adaptive de-interlacing</li><li>Provides 3D to 2D signal conversion [5]</li><li>Provides three balanced stereo audio outputs, each with independent mixer and DSP</li><li>Provides two additional audio mixes, either of which is selectable at any digital output</li><li>Features a built-in amplifier, selectable for 25W/Ch. @ 8Ω stereo or 50W @ 70/100 Volts mono</li><li>Enables analog-to-HDMI audio embedding and de-embedding</li><li>Enables USB signal routing via DM® transmitters and receivers or USB-EXT-DM series extenders [9]</li><li>Includes onboard IR, RS-232, relay, digital input, and Cresnet® control ports</li><li>Supports Crestron® touch screens, keypads, and wireless remotes</li><li>Supports XPanel with Smart Graphics® computer and web based control</li><li>Supports iPhone®, iPad®, and Android™ control apps</li><li>Supports universal remotes via external RC-5 compatible IR receiver [6]</li><li>Communicates natively with Crestron Fusion®</li><li>Enables IT-friendly network integration via SNMP</li><li>Integrated Ethernet switch provides a single-point LAN connection</li><li>Control Subnet — provides a dedicated local network for Crestron devices</li><li>Private Network Mode — requires just one IP address for the complete system</li><li>Content LAN port allows streaming and AirMedia traffic to be isolated on a secondary network</li><li>Includes front panel controls for basic configuration, diagnostics, and signal routing</li><li>Includes customizable front panel label strips and LCD display</li><li>Allows advanced setup and adjustment via a web browser</li><li>Features an internal universal power supply for worldwide compatibility</li><li>Furnishes power to PoDM+ and HDBaseT PoE+ powered devices [8]</li><li>3-space 19-inch rack-mountable</li></ul> <p>1. To enable the onboard AirMedia gateway requires the purchase of one SW-DMPS3-AIRMEDIA license.  To purchase the DMPS3-4K-350-C with AirMedia pre-activated (no license required), see model DMPS3-4K-350-C-AIRMEDIA. Wireless presentation using AirMedia requires an external wireless access point (not included). A wired Ethernet connection may also be used. AirMedia network traffic can be routed through the primary LAN port or isolated through the CONTENT LAN port. Performance quality for full-motion video content is dependent upon network performance and sending device performance. AirMedia support in the DMPS3-4K-350-C includes the same essential functionality as the AM-101 AirMedia Presentation Gateway with the exclusion of quad view, moderator mode, and remote view.<br>2. Some features and functions described in this spec sheet may not be supported using .AV Framework. For a complete list of capabilities and options supported by .AV Framework, please visit: http://www.crestron.com/avframework.<br>3. The streaming and AirMedia inputs are mutually exclusive. Only one or the other can be used at one time. Streaming network traffic can be routed through the primary LAN port or isolated through the CONTENT LAN port.<br>4. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.<br>5. The HDMI outputs do not pass 3D signals. On these outputs, 3D signals are automatically converted to 2D, then scaled and output as 2D. 3D signals can be passed through the DM 8G+ outputs.<br>6. Item(s) sold separately.<br>7. The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “Maximum DM 8G+ Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.<br>8. Enabling PoDM and PoE power sourcing requires an external power supply, model PW-4830DUS or DM-PSU-3X8-RPS, sold separately. Due to the inherent power loss that occurs over CATx cable, a maximum of 25.5 Watts is delivered at each PoDM+ or HDBaseT PoE+ powered device. Be aware that the CONTROL SUBNET port is limited to regular PoE (Class 0-3), which delivers a maximum of 12.95 Watts to the powered device. Any wiring that is connected to a PoDM or PoE PSE port is for intra-building use only and should not be connected to a line that runs outside of the building in which the PSE is located.<br>9. Manages the routing of USB HID signals between peripheral DM devices that are equipped with USB HID ports. The USB ports onboard the DMPS3-4K-350-C are not usable for USB signal routing. Also programmable to manage the routing of USB signals between Crestron USB over Ethernet Extender modules (USB-EXT-DM, sold separately). Refer to the USB-EXT-DM spec sheet for more information.<br>10. License required. The DMPS3-4K-350-C supports a maximum of 500 BACnet objects when dedicated for BACnet use only. Actual capabilities are contingent upon the overall program size and complexity.</p>

<p>The DM® XiO Director, model DM-XIO-DIR-80, is an enterprise-grade network appliance that facilitates configuration, control, and management of a large-scale AV network. Using DM NVX encoder/decoders, Crestron® offers the industry’s most versatile and scalable solution for distributing 4K60 4:4:4 HDR video over an IP network. The XiO Director provides a means for managing large networks of DM NVX devices, routing AV signals, and simplifying integration with one or more Crestron control systems.<br></p><p><strong>Virtual DM® Switcher</strong><br>The XiO Director virtually emulates the functionality of a traditional hardware-based DigitalMedia™ matrix switcher, routing high-quality 4K streaming AV signals throughout a room, building, or campus. The DM-XIO-DIR-80 model supports a total of 80 endpoint devices consisting of DM NVX encoders and decoders. Multiple XiO Director units can be deployed, with the ability to route signals between units just like hardware switchers [1], easily handling even the largest corporate enterprise, university, governmental, military, medical, transportation, sports, entertainment, hospitality, gaming, or retail application.<br><br></p><p><strong>Simple, Flexible Configuration</strong><br>System configuration could not be simpler. The XiO Director automatically discovers each DM NVX endpoint on the network, and allows each endpoint to be assigned as a logical input or output to the software-based matrix switcher. The XiO Director effectively eliminates the need for a physical switcher, providing the virtual equivalent running on the AV network.<br>Note: The DM-XIO-DIR-80 assigns all associated endpoints to a single “domain.” A domain is a logical grouping of endpoints that operate together as a single switching entity. Each DM-XIO-DIR-80 in a system functions as a separate domain. Other XiO Director models, including the DM-XIO-DIR-160 and DM-XIO-DIR-ENT, can support multiple domains. Refer to each model’s spec sheet for more information and additional available features.<strong><br><br></strong></p><strong>Easy Web-based Setup and Control</strong><br>The XiO Director provides an intuitive web-based user interface to facilitate system configuration, signal routing, and comprehensive diagnostics of the complete AV network. Each domain and endpoint, as well as the inputs and outputs on each endpoint, can be designated with a user-friendly name. Navigating the entire system is easy using the search box [1] to quickly find domains, endpoints, inputs, and outputs by name or address. A system overview screen is also provided, showing the video and audio signal status for every input and output in a graphical layout that’s easy to view and navigate.<br>  <br><p><strong>Key Features</strong></p><ul><li>Comprehensive network AV system configuration, management, and signal routing</li><li>Emulates a traditional hardware-based matrix switcher</li><li>Works with Crestron® DM® NVX encoders and decoders</li><li>Supports 80 endpoints in a single domain</li><li>Fully scalable for any sized network</li><li>Intuitive web-based graphical user interface</li><li>Ethernet control system interface</li><li>Fully-programmable control of the virtual matrix and physical endpoints</li><li>Automatic endpoint device discovery</li><li>Custom naming and search tools</li><li>Easy diagnostics and signal status display</li><li>XML device map file import/export</li><li>Built-in logging</li><li>Four Gigabit Ethernet LAN ports</li><li>Single-space 19” rack-mountable</li><li>Universal 100-240V internal power supply</li></ul> <p>1. Search box navigation and the ability to route signals between units are future features that will be enabled via firmware update.</p>

<p>The DM® XiO Director, model DM-XIO-DIR-160, is an enterprise-grade network appliance that facilitates configuration, control, and management of a large-scale AV network. Using DM NVX encoder/decoders, Crestron® offers the industry’s most versatile and scalable solution for distributing 4K60 4:4:4 HDR video over an IP network. The XiO Director provides a means for managing large networks of DM NVX devices, routing AV signals, and simplifying integration with one or more Crestron control systems.</p><p><strong>Virtual DM® Switcher</strong><br>The XiO Director virtually emulates the functionality of a traditional hardware-based DigitalMedia™ matrix switcher, routing high-quality 4K streaming AV signals throughout a room, building, or campus. The DM-XIO-DIR-160 model supports a total of 160 endpoint devices consisting of DM NVX encoders and decoders. Multiple XiO Director units can be deployed, with the ability to route signals between units just like hardware switchers [1], easily handling even the largest corporate enterprise, university, governmental, military, medical, transportation, sports, entertainment, hospitality, gaming, or retail application.<br><br></p><p><strong>Simple, Flexible Configuration</strong><br>System configuration could not be simpler. The XiO Director automatically discovers each DM NVX endpoint on the network, and allows each endpoint to be assigned as a logical input or output within a “domain.” A domain is a logical grouping of endpoints that operate together as a single switching entity, allowing individual rooms and other subsystems to be arranged and controlled independently. It’s like having multiple independent matrix switchers in a single rack space. The XiO Director effectively eliminates the need for physical switchers in every room, replacing them with the virtual equivalent running on the AV network.<br>Note: The DM-XIO-DIR-160 supports a maximum of 20 domains. For larger systems, use multiple units or use model DM-XIO-DIR-ENT, which supports 240 domains and includes additional “enterprise” features. Refer to the DM-XIO-DIR-ENT spec sheet for more information.<br><br></p><strong>Easy Web-based Setup and Control</strong><br>The XiO Director provides an intuitive web-based user interface to facilitate system configuration, signal routing, and comprehensive diagnostics of the complete AV network. Each domain and endpoint, as well as the inputs and outputs on each endpoint, can be designated with a user-friendly name. Navigating the entire system is easy using the search box [1] to quickly find domains, endpoints, inputs, and outputs by name or address. A system overview screen is also provided, showing the video and audio signal status for every input and output in a graphical layout that’s easy to view and navigate.<br>  <br><p><strong>Key Features</strong></p><ul><li>Comprehensive network AV system configuration, management, and signal routing</li><li>Emulates a traditional hardware-based matrix switcher</li><li>Works with Crestron® DM® NVX encoders and decoders</li><li>Supports 160 endpoints and 20 domains</li><li>Enables grouping of endpoints in up to 20 independent subsystems</li><li>Fully scalable for any sized network</li><li>Intuitive web-based graphical user interface</li><li>Ethernet control system interface</li><li>Fully-programmable control of virtual matrices and physical endpoints</li><li>Automatic endpoint device discovery</li><li>Custom naming and search tools</li><li>Easy diagnostics and signal status display</li><li>XML device map file import/export</li><li>Built-in logging</li><li>Four Gigabit Ethernet LAN ports</li><li>Single-space 19” rack-mountable</li><li>Universal 100-240V internal power supply</li></ul> <p>1.Search box navigation and the ability to route signals between units are future features that will be enabled via firmware update.</p>

<p>The DM® XiO Director, model DM-XIO-DIR-ENT, is an enterprise-grade network appliance that facilitates configuration, control, and management of a large-scale AV network. Using DM NVX encoder/decoders, Crestron® offers the industry’s most versatile and scalable solution for distributing 4K60 4:4:4 HDR video over an IP network. The XiO Director provides a means for managing large networks of DM NVX devices, routing AV signals, and simplifying integration with one or more Crestron control systems.</p><p> </p><p><strong>Virtual DM® Switcher</strong><br>The XiO Director virtually emulates the functionality of a traditional hardware-based DigitalMedia™ matrix switcher, routing high-quality 4K streaming AV signals throughout a room, building, or campus. The DM-XIO-DIR-ENT model supports a total of 1000 endpoint devices consisting of DM NVX encoders and decoders. Multiple XiO Director units can be deployed, with the ability to route signals between units just like hardware switchers [1], easily handling even the largest corporate enterprise, university, governmental, military, medical, transportation, sports, entertainment, hospitality, gaming, or retail application.</p><p> </p><p><strong>Simple, Flexible Configuration</strong><br>System configuration could not be simpler. The XiO Director automatically discovers each DM NVX endpoint on the network, and allows each endpoint to be assigned as a logical input or output within a “domain.” A domain is a logical grouping of endpoints that operate together as a single switching entity, allowing individual rooms and other subsystems to be arranged and controlled independently. It’s like having multiple independent matrix switchers in a single rack space. The XiO Director effectively eliminates the need for physical switchers in every room, replacing them with the virtual equivalent running on the AV network.</p> <p>Note: The DM-XIO-DIR-ENT supports a maximum of 240 domains. For larger systems, use multiple units.</p> <p><strong>Easy Web-based Setup and Control</strong><br>The XiO Director provides an intuitive web-based user interface to facilitate system configuration, signal routing, and comprehensive diagnostics of the complete AV network. Each domain and endpoint, as well as the inputs and outputs on each endpoint, can be designated with a user-friendly name. Navigating the entire system is easy using the search box [1] to quickly find domains, endpoints, inputs, and outputs by name or address. A system overview screen is also provided, showing the video and audio signal status for every input and output in a graphical layout that’s easy to view and navigate.</p><p> </p><p><strong>Copper or Fiber LAN Connectivity</strong><br>The DM-XIO-DIR-ENT includes six 1000Base-T RJ45 LAN ports and six 10GBase-X SFP+ LAN ports. Connection to a Gigabit or 10 Gigabit fiber optic network is facilitated by inserting an appropriate SFP or SFP+ transceiver module (Crestron SFP-1G or SFP-10G series, sold separately) into any SFP+ port. A selection of modules is offered to accommodate various multimode and single-mode fiber types.</p> <p><strong>Redundant Power Supplies</strong><br>Onboard dual redundant power supplies provide enhanced reliability for demanding applications. In the unlikely event of an individual power supply fault, the DM-XIO-DIR-ENT will continue to operate unhindered on only one functioning power supply. A modular, hot-swappable design allows either power supply to be replaced in seconds from the rear panel without powering down or rebooting the system. The DM-XIO-DIR-ENT ships complete with both power supply modules installed.</p><strong>Key Features</strong><br><ul><li>Comprehensive network AV system configuration, management, and signal routing</li><li>Emulates a traditional hardware-based matrix switcher</li><li>Works with Crestron® DM® NVX encoders and decoders</li><li>Supports 1000 endpoints and 240 domains</li><li>Enables grouping of endpoints in up to 240 independent subsystems</li><li>Fully scalable for any sized network</li><li>Intuitive web-based graphical user interface</li><li>Ethernet control system interface</li><li>Fully-programmable control of virtual matrices and physical endpoints</li><li>Automatic endpoint device discovery</li><li>Custom naming and search tools</li><li>Easy diagnostics and signal status display</li><li>XML device map file import/export</li><li>Built-in logging</li><li>Six Gigabit Ethernet RJ45 LAN ports</li><li>Six 1/10 Gigabit Ethernet SFP+ LAN ports</li><li>Fiber optic connectivity via optional SFP or SFP+ transceivers</li><li>Onboard 100-240V hot-swappable redundant power supplies</li><li>Single-space 19” rack-mountable</li></ul><p>1. Search box navigation and the ability to route signals between units are future features that will be enabled via firmware update.</p><p></p>