A pediatric emergency cart specifically designed to support pediatric patients. The cart will have nine drawers of various heights and a full range of accessories including an IV pole, Oxygen tank holder, suction unit shelf, hospital grade socket outlet, defibrillator shelf, locking sharps container, to name a few. The dimensions are for the cart only and do not include accessories.

Automatic slide cover slipper. Takes standard microscope slides and places a resin-coated film over the slide. This device uses reagent grade Xylene as the fixing agent. Fume exhaust cover available.

Professional medical grade DVD video recorder/player. Approximately 5" high X 10" wide X 14" deep. Meets NTSC and PAL standards and employs MPEG2 video compression. Capable of high speed picture search, direct recording into available disc space and recording and playback on various DVD formats. Audio uses Dolby digital format. Convenience outlet required at point of use.

Refrigeration unit for twelve cold therapy packs. Unit features thermostatic temperature control, automatic defrosting and refrigeration grade insulation. Interior chamber is designed to facilitate periodic cleaning. Smaller capacity models are available.

SIRIUS 2001 is a brilliant white, high covering, vapour permeable paint in water dispersion. It is characterized by a high grade of white. Its special formulation makes it suitable for use on any interior wall surface, especially when a good level of vapour permeability is required. It has a low level of odour, is non inflammable and is friendly to both humans and the environment.

This product family of hung windows retains an AAMA Heavy Commercial and Architectural Grade rating to meet the most demanding specifications and is a proven performer in projects ranging from historical replication to new construction. This hung window series is an attractive and economical product for a wide range of applications. Multiple glazing options offer flexibility to meet specific design requirements. A thermal barrier in the frame and sash improves thermal performance enhancing energy saving potential. Offered with a complete line of sub frames, mullions and architectural sills, this product family provides the complete solution for fenestration needs.

This product family of hung windows retains an AAMA Heavy Commercial and Architectural Grade rating to meet the most demanding specifications and is a proven performer in projects ranging from historical replication to new construction. This hung window series is an attractive and economical product for a wide range of applications. Multiple glazing options offer flexibility to meet specific design requirements. A thermal barrier in the frame and sash improves thermal performance enhancing energy saving potential. Offered with a complete line of sub frames, mullions and architectural sills, this product family provides the complete solution for fenestration needs.

This product family of hung windows retains an AAMA Heavy Commercial and Architectural Grade rating to meet the most demanding specifications and is a proven performer in projects ranging from historical replication to new construction. This hung window series is an attractive and economical product for a wide range of applications. Multiple glazing options offer flexibility to meet specific design requirements. A thermal barrier in the frame and sash improves thermal performance enhancing energy saving potential. Offered with a complete line of sub frames, mullions and architectural sills, this product family provides the complete solution for fenestration needs.

This product family of hung windows retains an AAMA Heavy Commercial and Architectural Grade rating to meet the most demanding specifications and is a proven performer in projects ranging from historical replication to new construction. This hung window series is an attractive and economical product for a wide range of applications. Multiple glazing options offer flexibility to meet specific design requirements. A thermal barrier in the frame and sash improves thermal performance enhancing energy saving potential. Offered with a complete line of sub frames, mullions and architectural sills, this product family provides the complete solution for fenestration needs.

<p>Planter. Seating. Storage. With modular Bison Cubes, the choice is yours! Bison Cubes make it easy to design a comfortable and beautiful environment. Bison Cubes integrate seamlessly with Bison Deck Systems. Instead of installing a wood deck tile, set a Bison Cube in its place for use as a planter or add a Bison Ipê Cube Top for seating and storage. <em>Note: The digital images displayed have the most accurate color possible. However, due to differences in computer monitors, we cannot be responsible for variations in color between the actual product and your screen.</em><br></p> <ul><li>Commercial grade aluminum Cubes</li><li>Handcrafted of never-rust .090 marine-grade aluminum (3/32″ thick) </li><li>Custom sizes, materials, and colors available</li><li>Maintenance free</li><li>Typically contain 20% recycled content and are 100% recyclable</li><li>Finished with Low VOC powder-coat paints and sealants</li><li>Drain holes and irrigation sleeves included</li><li>Warranty: Limited 5 year warranty on cube structure and powder coated finishes available</li><li>Can contribute to LEED points</li><li>Made in the USA</li></ul>

<p>Bison Wood Deck Tiles offer the design flexibility to create versatile, unique outdoor spaces. Commercial grade, responsibly harvested, hardwood tiles weather well, and are available in standard and FSC® Certified species. Bison Wood Tiles are designed for deck construction over exterior surfaces including rooftops, courtyards, terraces, pool decks, and more in both residential and commercial applications. Installed on Bison Pedestals, these wood tiles reduce labor costs and create a custom look at a cost-effective price. Bison Wood Tiles weather over time, developing a silvery-gray patina. If maintaining the natural wood color is desired, wood tiles can be periodically cleaned and sealed.<br><em>Note: Wood is a natural product and actual tile colors may differ from photo.</em> </p> <ul><li>Species Include: Bamboo, Cumaru, Garapa, Ipê, Mahogany, and Massaranduba</li><li>Exclusive Bison FS-1 Fastening Kit and Continuous Kerf Cut Design* allows easy tile attachment, removal, and replacement</li><li>Modular sizes 2’ x 2’, 4’ x 2’, and 30” x 30”</li><li>Custom sizes available</li><li>FSC® Certified (SCS-COC-002585) species available</li><li>Full System Warranty with Bison Pedestals</li><li>Bison Ipê WoodTile Systems Meet: ASTM E108-07a Class A Fire Rating, ASTM C1028-07 Slip Resistance, ASTM TAS108-95 Wind Uplift, Seismic Design Categories (SDC) A-F</li></ul> <p>*US #8,302,356 Patent and Patents Pending</p>

The Acrylicon Variant System is an Industrial grade, mono-colour, self-levelling system which can be installed with or without scattered flakes and cures within 2 hours. The thickness of the floor may vary from 1mm to 3mm, depending on the level of impact resistance required by the customer. With an extremely high compressive strength the system is ultra-cleanable even with heavy traffic. The slip resistance can be adjusted based on the customer’s needs and specified regulations. Designed for heavy industry and clean environments, for example heavy engineering, laboratories, clean rooms, paper mills, pharmaceutical and other areas where hygiene and cleanability are paramount.

Oak Breeze matt lacquered is a clean even grade with no/few knots or significant colour variation.

Oak Breeze is a clean even grade with no/few knots or significant colour variation.

This single-strip ash floor from the Lux Collection delivers a refined expression with a clean, even grade and a weightless white stain. Four-sided micro-bevelling at the edging ensures a classic, fullplank look and feel. The ultra-matt lacquer finish enhances the natural variations in the wood, creating the impression of newly sawn timber. This effectively eliminates glare while protecting the floor from daily wear.

This 2-strip oak floor from the Sand Collection features warm tones highlighted by a white pigmented matt lacquer for a contemporary expression with subtle contrasts in the planks. The light finish enhances the even grade of the boards, resulting in a soft and smooth appearance.

ASSA ABLOY France solution for office door, single leaf, equipped with a heavy use single point lock, a European profile cylinder with high security electronic keys, a pair of design handles and a CAM-Motion® door closer. The solution is equipped with: - a singlepoint lock D455, reversible, CE, CFPF, NF EN 12209, 10 years guaranteed, by Vachette - a European profile cylinder, EN 15684 grade F, by Vachette - high security electronic keys eCLIQ, reversible, EN 156842 grade F, by Vachette - a pair of design handles on roses Ovalis, stainless steel AISI304, EN 1906 grade 3, 10 years guaranteed, by Vachette - a embedded door closer DC840 with CAM-Motion® Technology, CE, according to EN 1154, by ASSA ABLOY - a door stop 3737 silver, by Vachette Areas of ​​application: Offices For more information, please contact us: http://www.assaabloy.fr/en/contact-us

Ytong AAC convinc with its sophisticated and well matched construction systems and the use of pre-fabricated products where they are most utilized. High quality primary products sand, lime, water, cement and the energy-saving fabrication of those stand for a high grade of environmental sustainability. Builder-owners benefit from the special advantages of solid constructions throughout the whole average life. This is not only due to the comfort as a result of the high grade of thermal protection in wintertime and on the other hand a pleasant cool indoor climate in summertime, but it also ensures the clinical safety of the building materials on mineral basis, certified by several approved institutes. Contaminant-free habitation, protection against electromagnetic pollution and other environmental influences as well as the use of non-combustible building materials assures secureness for your whole family and the conservation of value of your capital investment. Benefits: • Pure building materials on mineral basis • Clinical safety • Construction components can be cropped accurately • Improved thermal conductivity due to tiny air spaces

Ytong AAC convinc with its sophisticated and well matched construction systems and the use of pre-fabricated products where they are most utilized. High quality primary products sand, lime, water, cement and the energy-saving fabrication of those stand for a high grade of environmental sustainability. Builder-owners benefit from the special advantages of solid constructions throughout the whole average life. This is not only due to the comfort as a result of the high grade of thermal protection in wintertime and on the other hand a pleasant cool indoor climate in summertime, but it also ensures the clinical safety of the building materials on mineral basis, certified by several approved institutes. Contaminant-free habitation, protection against electromagnetic pollution and other environmental influences as well as the use of non-combustible building materials assures secureness for your whole family and the conservation of value of your capital investment. Benefits: • Pure building materials on mineral basis • Clinical safety • Construction components can be cropped accurately • Improved thermal conductivity due to tiny air spaces

The ADJUSTABLE PAVING SUPPORT "SPECIAL" WITH SELF-LEVELLING HEAD is designed to give a strong and robust support for raised floors. The Adjustable Paving Support Special for raised floors also has one of the highest load capacities available on the market today. Because of its versatility it can be used on both internal or external projects, it can also be used with a wide range of different types of paving, for example porcelain, marble or stone. It is the perfect solution for turning non practicable areas into practicable ones, whether they are waterproofed and not, it also allows for the passage of cables, pipes etc that are normally present in offices, shops and work environments. For this reason, raised floors are mainly used in new buildings or in renovation where maximum design and flexibility is required or simply to ease the inspection of the waterproofing layer or any pipes, cables etc. The Adjustable Paving Support Special is produced using only the finest top grade polypropylene and additives, these top quality raw materials ensure its long durability and also increase the load capacity.

The ADJUSTABLE PAVING SUPPORT “SPECIAL LIGHT” can be used on both internal or external projects, it can also be used with a wide range of different types of paving, for example porcelain, marble or stone. It is the perfect solution for turning non practicable areas into practicable ones, whether they are waterproofed and not, it also allows for the passage of cables, pipes etc that are normally present in offices, shops and work environments. For this reason, raised floors are mainly used in new buildings or in renovation where maximum design and flexibility is required or simply to ease the of inspection the waterproofing layer or any pipes, cables etc. The Adjustable Support Special Light is produced using only the finest top grade polypropylene and additives, these top quality raw materials ensure its long durability and also increase the load capacity.

System 111 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS111XA10

System 111 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Handle made of stainless steel, diameter 25 mm with tubular handle made of stainless steel, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS111XA20

System 111 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Version for BKS-locks. Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 32 mm, width of the transmission unit 52 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS111XA30

System 111 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Version for BKS-locks. Handle made of stainless steel, diameter 25 mm with tubular handle made of stainless steel, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 32 mm, width of the transmission unit 52 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS111XA40

System 162 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS160XA10

System 162 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Handle made of stainless steel, diameter 25 mm with tubular handle made of stainless steel, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 27.7 mm, width of the transmission unit 45 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS160XA20

System 162 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Version for BKS-locks. Handle made of stainless steel, diameter 25 mm with tubular handle made of polyamide, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side, conforms to the requirements of DIN 18040. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 32 mm, width of the transmission unit 52 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS160XA30

System 162 panic bar for equipping exit doors - approval to EN 1125 only in combination with tested locks - with CE marking. Approved for fire and smoke doors, listing in the national technical approval test certificate of the respective door manufacturer in conjunction with DIN 18273, DIN 4102, DIN 1634, for single leaf or double doorsets in escape routes (inactive or inactive and active leaf) Version for BKS-locks. Handle made of stainless steel, diameter 25 mm with tubular handle made of stainless steel, diameter 30 mm. Handle tube positioned as one-sided handle, therefore clear visualisation of the optimum pressure point on the lock side. The stainless steel tubes are connected by a square bar - telescopic. Low projection depending on the operating angle of the lock follower, but at least in accordance with DIN 1125, grade 2: <= 100 mm. Mounting distance 761 - 860 mm, 861 - 1010 mm, 1011 - 1160 mm, 1161 - 1300 mm, 301 - 1440 mm and 1441 - 1580 mm. Variable mounting distance: shorter bar (fixing centres > 761 mm) at customer request, specify exact measurement. For use on timber and steel doors and metal frame doors, backset from 35 mm (depending on profile) as single or double doorset. Concealed, tamper-resistant screw fixing with threaded screws M5. Gear unit and the thrust bearing with cover, width of the rosette 32 mm, width of the transmission unit 52 mm, no jamming due to splayed surfaces of the gear unit cover on the lock side and positioning of the push-bar on the inside of the gear unit. Surface satin finished Designed and tested for projects, classification to EN 1125 Category of use: Class 3 Durability: Class 7 Door mass: Class 6 Suitability for use on fire and smoke doors: Class B Safety - personal protection: Class 1 Corrosion resistance: Class 3 Security - burglary protection: Class 2 Projection of device: Class 2 Type of device: A Field of door application: Class A Article no.: HEWI PS160XA40

Rectangular form bath design with sanitary grade acrylic - fibreglass reinforced with polyester resin

Rectangular form bath design with sanitary grade acrylic - fibreglass reinforced with polyester resin

Rectangular form bath design with sanitary grade acrylic - fibreglass reinforced with polyester resin

The ADJUSTABLE PAVING SUPPORT “SPECIAL LIGHT” can be used on both internal or external projects, it can also be used with a wide range of different types of paving, for example porcelain, marble or stone. It is the perfect solution for turning non practicable areas into practicable ones, whether they are waterproofed and not, it also allows for the passage of cables, pipes etc that are normally present in offices, shops and work environments. For this reason, raised floors are mainly used in new buildings or in renovation where maximum design and flexibility is required or simply to ease the of inspection the waterproofing layer or any pipes, cables etc. The Adjustable Support Special Light is produced using only the finest top grade polypropylene and additives, these top quality raw materials ensure its long durability and also increase the load capacity.

The ADJUSTABLE PAVING SUPPORT “SPECIAL LIGHT” can be used on both internal or external projects, it can also be used with a wide range of different types of paving, for example porcelain, marble or stone. It is the perfect solution for turning non practicable areas into practicable ones, whether they are waterproofed and not, it also allows for the passage of cables, pipes etc that are normally present in offices, shops and work environments. For this reason, raised floors are mainly used in new buildings or in renovation where maximum design and flexibility is required or simply to ease the of inspection the waterproofing layer or any pipes, cables etc. The Adjustable Support Special Light is produced using only the finest top grade polypropylene and additives, these top quality raw materials ensure its long durability and also increase the load capacity.

<p>The PC-100 is a professional grade, rack-mountable power conditioner designed to provide 120 Volt AC power distribution, switching, surge protection, and noise filtering for Crestron® control systems, AV systems, computers, and other equipment. Eight switched outlets are provided on the rear panel, plus a single unswitched convenience outlet is provided on the front. All nine outlets are protected and filtered. The switched outlets are arranged in four banks of two, two of which are turn-on delayed to prevent dangerous transients during power-up.<br><br></p><strong>Power Conditioning<br></strong>A quality power conditioner is an essential component of any professional system to prevent sudden equipment failure due to lightning and electrical disturbances, to prolong the lifespan of that equipment, and to maximize overall system performance during everyday operation. The PC-100 includes the following power conditioning features:<br><ul><li><strong>Surge Protection</strong> — Provides protection against surges and spikes in the AC power line caused by lightning and other electrical disturbances</li><li><strong>Under/Over Voltage Cutoff</strong> — Shuts off power to the rear panel outlets if the line voltage strays beyond the normal operating range</li><li><strong>Thermal Breaker</strong> — Disrupts power to all outlets in case of an overload condition</li><li><strong>EMI/RFI Noise Filtering</strong> — Prevents electromagnetic and radio frequency interference that can negatively impact sound and video quality</li><li><strong>Wiring Fault Detection</strong> — Detects faulty wiring of the incoming AC power line and shuts off power to the rear panel outlets until the fault is corrected [1]</li></ul><strong>Three-Stage Sequential Turn-On Delay</strong><br>The switched outlets on the PC-100’s rear panel are arranged in four banks, with two outlets per bank. When the front panel switch is turned on, or when power is applied to the main line input following a power outage or through an externally switched circuit, the first two banks of outlets turn on immediately, the third bank turns on following a one second delay, and the fourth bank turns on following a two second delay. This ensures that the connected equipment gets powered up in proper order, preventing dangerous transients that can damage delicate components and potentially trip the main circuit breaker. It can also help to prevent audible pops and thumps through connected audio equipment at power-up.<br><p><br></p><p><strong>Protection Status Output</strong></p>A contact closure output is included to provide notification to a control system or other equipment if the internal surge protection circuit is compromised due to an extreme transient voltage surge. In the unlikely event of such a condition, the PROTECTION output presents a low-voltage contact closure signal and all power to the rear panel outlets is switched off. Protection status is also indicated via LEDs on the front panel.<br><p><br></p><p><strong>UL® 1449 Certified</strong></p><p>The PC-100 has been tested and certified by UL as compliant with the UL 1449 safety and performance standard for surge protective devices (SPD).<br></p><p></p><p>  </p><p><strong>Key Features</strong></p><ul><li>Rack-mountable power conditioner</li><li>Eight switched rear panel outlets</li><li>Three-stage sequential turn-on delay</li><li>One unswitched front panel outlet</li><li>Professional grade surge protection</li><li>UL® 1449 Type 3 Listed</li><li>Thermal breaker overload protection</li><li>Over-voltage and under-voltage cutoff</li><li>EMI and RFI noise filtering</li><li>Wiring fault detection [1]</li><li>Front panel main power switch and status indicators</li><li>Protection status contact closure output</li><li>Single-space 19 inch rack-mountable</li><li>Rated 15 Amps at 120 Volts AC</li><li>Limited Lifetime Product Warranty</li><li>Limited 5 Year Connected Equipment Protection Warranty</li></ul><p>1. Detects most input line wiring faults. Does not detect neutral/ground reversal. Does not discern between ground connections at the AC power line, chassis, or connected equipment (a ground connection at any point will be detected by the PC-100 as normal). The installer is responsible for proper wiring and grounding of this and all connected equipment according to applicable electrical codes, accepted guidelines, and best practices. Proper wiring and function of the AC power source should be verified prior to connecting the PC-100 or any other equipment. Use of this product does not negate the responsibilities of the installer and end-user to exercise all appropriate and required measures for safe and reliable installation and operation.</p>

The ADJUSTABLE PAVING SUPPORT "SPECIAL JOIST" WITH SELF-LEVELLING HEAD is designed to give a strong and robust support for raised floors. The Adjustable Paving Support Special Joist for raised floors also has one of the highest load capacities available on the market today. Because of its versatility it can be used on both internal or external projects and can also be used with a wide range of decking systems. Thanks to its special head, it is adaptable to any type of joist support structure. It is the perfect solution for turning non practicable areas into practicable ones, whether they are waterproofed and not, it also allows for the passage of cables, pipes etc that are normally present in offices, shops and work environments. For this reason, raised floors are mainly used in new buildings or in renovation where maximum design and flexibility is required or simply to ease the inspection of the waterproofing layer or any pipes, cables etc. The Adjustable Paving Support Special Joist is produced using only the finest top grade polypropylene and additives, these top quality raw materials ensure its long durability and also increase the load capacity.

<p>The PC-200 is a professional grade, rack-mountable power conditioner and controller designed to provide 120 Volt AC power distribution, switching, surge protection, noise filtering, and energy monitoring for Crestron® control systems, AV systems, computers, and other equipment. Eight switched outlets are provided on the rear panel, plus a single unswitched convenience outlet is provided on the front. All nine outlets are protected, filtered, and monitored. The switched outlets are arranged in four banks of two, three of which are turn-on delay-adjustable when controlled from the front panel power switch. The same three outlet banks are also individually controllable via a control system to enable selective switching of devices, on/off power sequencing, load-shedding, and other custom power control functionality.[1]<br>Built-in RMS voltage and current monitoring enables logging and reporting of the line voltage, current, power, and energy usage at the input. An external temperature sensor is included to keep tabs on heat conditions within the equipment rack or room. Network connectivity allows for setup and operation using a web browser, with extensive custom control and monitoring capabilities enabled through integration with a Crestron control system, the MyCrestron.com residential monitoring service, the Crestron Fusion® Cloud enterprise management service, or an SNMP client.[1,2]<br><br></p><strong>Power Conditioning<br></strong>A quality power conditioner is an essential component of any professional system to prevent sudden equipment failure due to lightning and electrical disturbances, to prolong the lifespan of that equipment, and to maximize overall system performance during everyday operation. The PC-200 includes the following power conditioning features:<br><ul><li><strong>Surge Protection</strong> — Provides protection against surges and spikes in the AC power line caused by lightning and other electrical disturbances</li><li><strong>Under/Over Voltage Cutoff</strong> — Shuts off power to the rear panel outlets if the line voltage strays beyond the normal operating range, which is adjustable on the PC-200</li><li><strong>Thermal Breaker</strong> — Disrupts power to all outlets in case of an overload condition</li><li><strong>EMI/RFI Noise Filtering</strong> — Prevents electromagnetic and radio frequency interference that can negatively impact sound and video quality</li><li><strong>Wiring Fault Detection</strong> — Detects faulty wiring of the incoming AC power line and shuts off power to the rear panel outlets until the fault is corrected [3]</li></ul><p><strong>Four-Stage Adjustable Turn-On Delay</strong><br>The switched outlets on the PC-200’s rear panel are arranged in four banks, with two outlets per bank. When operated by its front panel power switch, the first bank turns on immediately while the other three banks can be configured to turn on in any order according to the delay time set for each bank. Each bank is independently adjustable to provide up to 10 seconds of delay before turning on, ensuring that the connected equipment gets powered up in proper order with sufficient time for each piece to stabilize. This helps to prevent dangerous transients that can damage delicate components and potentially trip the main circuit breaker. It can also help to prevent audible pops and thumps through connected audio equipment at power-up. Delayed turn-on is initiated by turning on the front panel power switch, or by applying power to the main line input following a power outage or through an externally switched circuit.<br><br></p><p><strong>Three Remote-Controllable Switched Outlet Banks</strong><br>When connected to a local area network, three of the four outlet banks on the PC-200’s rear panel can be turned on or off independently using a web browser or control system. The other bank is always on as long as the front panel switch is turned on. This energy-saving feature allows select components to be powered down when not needed. Through integration with a control system, custom functionality can be programmed to enable control from a touch screen, keypad, remote, or mobile device. Sequential power-up and power-down functionality can be enabled through programming of the control system. For systems employing a backup generator or UPS, load-shedding can be performed to shut down unnecessary components during a power outage.[1]<br><br></p><strong>Energy Monitoring<br></strong>By sensing the incoming line voltage and the total device load, the PC-200 facilitates a host of solutions for monitoring, automating, and troubleshooting a system.<br><ul><li>Voltage monitoring allows fluctuations in the power line to be tracked and logged, helping to identify and document problems with the power utility or building wiring.</li><li>Energy monitoring provides the real power consumption (watts), current draw (amps), and energy usage (watt-hours) for all of the connected devices combined.</li><li>By connecting and testing one component at a time, the PC-200 allows power-hungry equipment to be identified and replaced with more efficient equipment.</li><li>High inrush current devices can be identified to assist in optimizing the configuration of power sequencing schemes.</li><li>Overall energy usage can be tracked and logged to identify trends and reform energy-wasting behaviors.</li><li>System usage can be tracked to inform the scheduling of maintenance and future purchasing decisions.</li><li>An alert notification can be sent if there’s a sudden or abnormal drop in current draw, potentially indicating a device has been shut off improperly or disconnected due to theft (effective only when outlets are switched on).</li></ul><p><strong>Ambient Temperature Sensing</strong></p><p>The PC-200 offers a complete equipment protection solution by monitoring the ambient temperature within the equipment cabinet or room to prevent overheating. The included temperature sensor connects to the rear of the PC-200 and features a choice of magnetic or adhesive mounting for easy placement within a typical equipment rack enclosure. The over-temperature cutoff threshold can be set to shut down power to the system if conditions exceed a safe operating temperature. Through a control system, the temperature measurement can be utilized to regulate the operation of cooling fans or air-conditioning equipment to keep equipment running cool.</p><p><strong>Ping Monitoring</strong></p><p>No matter how well a system is designed and programmed, even the finest control system or computer has the potential to lock up and stop responding once in a while. The PC-200 can be configured to detect an unresponsive device by sending it a ping command at regular intervals. If the ping request is not returned after four tries, the outlet bank feeding the monitored device cycles off and on to reboot the device, quickly restoring normal operation without any human intervention.</p><p><strong>Remote Management & Control</strong><br></p><p>The PC-200 integrates neatly into any system or facility. Used alone, it can be set up and managed through a web browser. It can also be configured to send email notifications in case of certain specified events. Integration with the MyCrestron.com residential monitoring service provides a cloud based solution for homeowners to monitor and manage the PC-200 as part of a complete Crestron home automation system. Or, Crestron Fusion Cloud provides an enterprise solution for corporations and universities to manage rooms using the PC-200 throughout a building or campus. Built-in SNMP support enables integration with third-party IT management software, allowing network administrators to manage one or many networked PC-200s in an IT-friendly format. And of course, the PC-200 can be integrated with a Crestron control system via Ethernet or Cresnet® to enable control and monitoring through a touch screen, handheld remote, or mobile device.[1,2]</p><p><strong>Key Features</strong><br></p><ul><li>Rack-mountable power conditioner and controller</li><li>Eight switched rear panel outlets, arranged in banks of two</li><li>Adjustable turn-on delay and remote switching per each of three banks</li><li>One unswitched front panel outlet</li><li>Built-in current sensing and energy monitoring</li><li>Line voltage monitoring</li><li>Professional grade surge protection</li><li>UL® 1449 Type 3 Listed</li><li>Thermal breaker overload protection</li><li>Adjustable over-voltage and under-voltage cutoff</li><li>EMI and RFI noise filtering</li><li>Wiring fault detection [3]</li><li>Ambient temperature sensing and over-temperature cutoff</li><li>Ping monitoring (device lockup detection and reboot)</li><li>Built-in energy usage and event logging</li><li>Front panel main power switch and status indicators</li><li>Easy setup and operation via web browser</li><li>Crestron® control system integration via Ethernet or Cresnet®</li><li>Remote management via MyCrestron.com, Crestron Fusion® Cloud, or SNMP [2]</li><li>Single-space 19 inch rack-mountable</li><li>Rated 15 Amps at 120 Volts AC</li><li>Limited Lifetime Product Warranty</li><li>Limited 5 Year Connected Equipment Protection Warranty</li></ul><p>1. Crestron control system and custom programming sold separately.<br>2. Email notification and direct integration with MyCrestron.com, Crestron Fusion, and SNMP will be enabled through a future firmware update. Alternately, these services can be integrated now through a Crestron control system with custom programming.<br>3. Detects most input line wiring faults. Does not detect neutral/ground reversal. Does not discern between ground connections at the AC power line, chassis, or connected equipment (a ground connection at any point will be detected by the PC-200 as normal). The installer is responsible for proper wiring and grounding of this and all connected equipment according to applicable electrical codes, accepted guidelines, and best practices. Proper wiring and function of the AC power source should be verified prior to connecting the PC-200 or any other equipment. Use of this product does not negate the responsibilities of the installer and end-user to exercise all appropriate and required measures for safe and reliable installation and operation.</p>

The ADJUSTABLE PAVING SUPPORT “SPECIAL LIGHT” can be used on both internal or external projects, it can also be used with a wide range of different types of paving, for example porcelain, marble or stone. It is the perfect solution for turning non practicable areas into practicable ones, whether they are waterproofed and not, it also allows for the passage of cables, pipes etc that are normally present in offices, shops and work environments. For this reason, raised floors are mainly used in new buildings or in renovation where maximum design and flexibility is required or simply to ease the of inspection the waterproofing layer or any pipes, cables etc. The Adjustable Support Special Light is produced using only the finest top grade polypropylene and additives, these top quality raw materials ensure its long durability and also increase the load capacity.

<p>The PC-300 is a professional grade, rack-mountable power conditioner and controller designed to provide 120 Volt AC power distribution, switching, surge protection, noise filtering, and energy monitoring for Crestron® control systems, AV systems, computers, and other equipment. Eight individually-switched outlets are provided on the rear panel, plus a single unswitched convenience outlet is provided on the front. All nine outlets are protected, filtered, and monitored. The switched outlets are each turn-on delay-adjustable when controlled from the front panel power switch. The switched outlets are also individually controllable via a control system to enable independent switching of devices, on/off power sequencing, load-shedding, and other custom power control functionality.[1]</p><p>Built-in RMS voltage and current monitoring enables logging and reporting of line voltage fluctuations at the input, as well as current, power, and energy usage at each outlet. An external temperature sensor is included to keep tabs on heat conditions within the equipment rack or room. Network connectivity allows for setup and operation using a web browser, with extensive custom control and monitoring capabilities enabled through integration with a Crestron control system, the MyCrestron.com residential monitoring service, the Crestron Fusion® Cloud enterprise management service, or an SNMP client.[1,2] Setup and operation can also be performed through the LCD front panel.</p><p> </p><strong>Power Conditioning<br></strong>A quality power conditioner is an essential component of any professional system to prevent sudden equipment failure due to lightning and electrical disturbances, to prolong the lifespan of that equipment, and to maximize overall system performance during everyday operation. The PC-300 includes the following power conditioning features:<br><ul><li><strong>Surge Protection</strong> — Provides protection against surges and spikes in the AC power line caused by lightning and other electrical disturbances</li><li><strong>Under/Over Voltage Cutoff</strong> — Shuts off power to the rear panel outlets if the line voltage strays beyond the normal operating range, which is adjustable on the PC-300</li><li><strong>Thermal Breaker</strong> — Disrupts power to all outlets in case of an overload condition</li><li><strong>EMI/RFI Noise Filtering</strong> — Prevents electromagnetic and radio frequency interference that can negatively impact sound and video quality</li><li><strong>Wiring Fault Detection</strong> — Detects faulty wiring of the incoming AC power line and shuts off power to the rear panel outlets until the fault is corrected [3]</li></ul> <p><strong>Eight-Stage Adjustable Turn-On Delay</strong><br>When operated by its front panel power switch, the PC-300 allows each of its rear panel outlets to turn on in any order according to the delay time set for each outlet. Each outlet is individually adjustable to provide up to 10 seconds of delay before turning on, ensuring that the connected equipment gets powered up in proper order with sufficient time for each piece to stabilize. This helps to prevent dangerous transients that can damage delicate components and potentially trip the main circuit breaker. It can also help to prevent audible pops and thumps through connected audio equipment at power-up. Delayed turn-on is initiated by turning on the front panel power switch, or by applying power to the main line input following a power outage or through an externally switched circuit.<br><br></p><p><strong>Eight Remote-Controllable Switched Outlets</strong><br>Any of the PC-300’s eight rear panel outlets can be turned on or off individually through the front panel LCD screen or over the network using a web browser or control system. This energy-saving feature allows select components to be powered down when not needed. Through integration with a control system, custom functionality can be programmed to enable control from a touch screen, keypad, remote, or mobile device. Sequential power-up and power-down functionality can be enabled through programming of the control system, with select outlets designated as always on. For systems employing a backup generator or UPS, load-shedding can be performed to shut down unnecessary components during a power outage.[1]</p><p> </p><strong>Energy Monitoring</strong><br>By sensing the incoming line voltage and individual device loads, the PC-300 facilitates a host of solutions for monitoring, automating, and troubleshooting a system.<br><ul><li>Voltage monitoring allows fluctuations in the power line to be tracked and logged, helping to identify and document problems with the power utility or building wiring.</li><li>Energy monitoring per outlet provides the real power consumption (watts), current draw (amps), and energy usage (watt-hours) for each connected device.</li><li>Allows power-hungry equipment to be identified and replaced with more efficient equipment.</li><li>High inrush current devices can be identified to assist in optimizing the configuration of power sequencing schemes.</li><li>Overall energy usage can be tracked and logged to identify trends and reform energy-wasting behaviors.</li><li>Individual device usage can be tracked to inform the scheduling of maintenance and future purchasing decisions.</li><li>The power state of an IR controlled device can often be determined by sensing its AC current draw, ensuring it’s on when it should be on.</li><li>An alert notification can be sent if there’s a sudden or abnormal drop in current draw, potentially indicating a device has been shut off improperly or disconnected due to theft (effective only when outlets are switched on).</li></ul><p> </p><p><strong>Ambient Temperature Sensing</strong><br>The PC-300 offers a complete equipment protection solution by monitoring the ambient temperature within the equipment cabinet or room to prevent overheating. The included temperature sensor connects to the rear of the PC-300 and features a choice of magnetic or adhesive mounting for easy placement within a typical equipment rack enclosure. The over-temperature cutoff threshold can be set to shut down power to the system if conditions exceed a safe operating temperature. Through a control system, the temperature measurement can be utilized to regulate the operation of cooling fans or air-conditioning equipment to keep equipment running cool.</p> <p><strong>Ping Monitoring</strong><br>No matter how well a system is designed and programmed, even the finest control system or computer has the potential to lock up and stop responding once in a while. The PC-300 can be configured to detect an unresponsive device by sending it a ping command at regular intervals. If the ping request is not returned after four tries, the outlet feeding the monitored device cycles off and on to reboot the device, quickly restoring normal operation without any human intervention.</p> <p><strong>Built-In Logging</strong><br>Events such as power surges, over/under voltage conditions, over-temperature conditions, ping failures, outlet switching activity, and sudden changes in current draw (indicative of a device being improperly shut off or disconnected) can all be logged as they occur to document the time and cause of problems and to track device usage. All sensor readings are logged at a configurable interval as short as five seconds providing a minimum of one week’s worth of data. Logs can be retrieved periodically to record a detailed history of events and energy usage over time.</p> <strong>UL® 1449 Certified</strong><br>The PC-300 has been tested and certified by UL as compliant with the UL 1449 safety and performance standard for surge protective devices (SPD).<br>  <br><strong>Key Features</strong><br><ul><li>Rack-mountable power conditioner and controller</li><li>Eight individual-switched rear panel outlets</li><li>Adjustable turn-on delay and local/remote switching per outlet</li><li>One unswitched front panel outlet</li><li>Built-in current sensing and energy monitoring per outlet</li><li>Line voltage monitoring</li><li>Professional grade surge protection</li><li>UL® 1449 Type 3 Listed</li><li>Thermal breaker overload protection</li><li>Adjustable over-voltage and under-voltage cutoff</li><li>EMI and RFI noise filtering</li><li>Wiring fault detection [3]</li><li>Ambient temperature sensing and over-temperature cutoff</li><li>Ping monitoring (device lockup detection and reboot)</li><li>Built-in energy usage and event logging</li><li>Front panel main power switch, status indicators, and color LCD</li><li>Easy setup and operation via front panel or web browser</li><li>Crestron® control system integration via Ethernet or Cresnet®</li><li>Remote management via MyCrestron.com, Crestron Fusion® Cloud, or SNMP [2]</li><li>Single-space 19 inch rack-mountable</li><li>Rated 15 Amps at 120 Volts AC</li><li>Limited Lifetime Product Warranty</li><li>Limited 5 Year Connected Equipment Protection Warranty</li></ul> <p>1. Crestron control system and custom programming sold separately.<br>2. Email notification and direct integration with MyCrestron.com, Crestron Fusion, and SNMP will be enabled through a future firmware update. Alternately, these services can be integrated now through a Crestron control system with custom programming.<br>3. Detects most input line wiring faults. Does not detect neutral/ground reversal. Does not discern between ground connections at the AC power line, chassis, or connected equipment (a ground connection at any point will be detected by the PC-300 as normal). The installer is responsible for proper wiring and grounding of this and all connected equipment according to applicable electrical codes, accepted guidelines, and best practices. Proper wiring and function of the AC power source should be verified prior to connecting the PC-300 or any other equipment. Use of this product does not negate the responsibilities of the installer and end-user to exercise all appropriate and required measures for safe and reliable installation and operation.</p>

The ADJUSTABLE PAVING SUPPORT "SPECIAL JOIST" WITH SELF-LEVELLING HEAD is designed to give a strong and robust support for raised floors. The Adjustable Paving Support Special Joist for raised floors also has one of the highest load capacities available on the market today. Because of its versatility it can be used on both internal or external projects and can also be used with a wide range of decking systems. Thanks to its special head, it is adaptable to any type of joist support structure. It is the perfect solution for turning non practicable areas into practicable ones, whether they are waterproofed and not, it also allows for the passage of cables, pipes etc that are normally present in offices, shops and work environments. For this reason, raised floors are mainly used in new buildings or in renovation where maximum design and flexibility is required or simply to ease the inspection of the waterproofing layer or any pipes, cables etc. The Adjustable Paving Support Special Joist is produced using only the finest top grade polypropylene and additives, these top quality raw materials ensure its long durability and also increase the load capacity.

The ADJUSTABLE PAVING SUPPORT "SPECIAL" WITH SELF-LEVELLING HEAD is designed to give a strong and robust support for raised floors. The Adjustable Paving Support Special for raised floors also has one of the highest load capacities available on the market today. Because of its versatility it can be used on both internal or external projects, it can also be used with a wide range of different types of paving, for example porcelain, marble or stone. It is the perfect solution for turning non practicable areas into practicable ones, whether they are waterproofed and not, it also allows for the passage of cables, pipes etc that are normally present in offices, shops and work environments. For this reason, raised floors are mainly used in new buildings or in renovation where maximum design and flexibility is required or simply to ease the inspection of the waterproofing layer or any pipes, cables etc. The Adjustable Paving Support Special is produced using only the finest top grade polypropylene and additives, these top quality raw materials ensure its long durability and also increase the load capacity.

The ADJUSTABLE PAVING SUPPORT "SPECIAL" WITH SELF-LEVELLING HEAD is designed to give a strong and robust support for raised floors. The Adjustable Paving Support Special for raised floors also has one of the highest load capacities available on the market today. Because of its versatility it can be used on both internal or external projects, it can also be used with a wide range of different types of paving, for example porcelain, marble or stone. It is the perfect solution for turning non practicable areas into practicable ones, whether they are waterproofed and not, it also allows for the passage of cables, pipes etc that are normally present in offices, shops and work environments. For this reason, raised floors are mainly used in new buildings or in renovation where maximum design and flexibility is required or simply to ease the inspection of the waterproofing layer or any pipes, cables etc. The Adjustable Paving Support Special is produced using only the finest top grade polypropylene and additives, these top quality raw materials ensure its long durability and also increase the load capacity.

The ADJUSTABLE PAVING SUPPORT "SPECIAL" WITH SELF-LEVELLING HEAD is designed to give a strong and robust support for raised floors. The Adjustable Paving Support Special for raised floors also has one of the highest load capacities available on the market today. Because of its versatility it can be used on both internal or external projects, it can also be used with a wide range of different types of paving, for example porcelain, marble or stone. It is the perfect solution for turning non practicable areas into practicable ones, whether they are waterproofed and not, it also allows for the passage of cables, pipes etc that are normally present in offices, shops and work environments. For this reason, raised floors are mainly used in new buildings or in renovation where maximum design and flexibility is required or simply to ease the inspection of the waterproofing layer or any pipes, cables etc. The Adjustable Paving Support Special is produced using only the finest top grade polypropylene and additives, these top quality raw materials ensure its long durability and also increase the load capacity.

The ADJUSTABLE PAVING SUPPORT "SPECIAL JOIST" WITH SELF-LEVELLING HEAD is designed to give a strong and robust support for raised floors. The Adjustable Paving Support Special Joist for raised floors also has one of the highest load capacities available on the market today. Because of its versatility it can be used on both internal or external projects and can also be used with a wide range of decking systems. Thanks to its special head, it is adaptable to any type of joist support structure. It is the perfect solution for turning non practicable areas into practicable ones, whether they are waterproofed and not, it also allows for the passage of cables, pipes etc that are normally present in offices, shops and work environments. For this reason, raised floors are mainly used in new buildings or in renovation where maximum design and flexibility is required or simply to ease the inspection of the waterproofing layer or any pipes, cables etc. The Adjustable Paving Support Special Joist is produced using only the finest top grade polypropylene and additives, these top quality raw materials ensure its long durability and also increase the load capacity.

The ADJUSTABLE PAVING SUPPORT "SPECIAL" WITH SELF-LEVELLING HEAD is designed to give a strong and robust support for raised floors. The Adjustable Paving Support Special for raised floors also has one of the highest load capacities available on the market today. Because of its versatility it can be used on both internal or external projects, it can also be used with a wide range of different types of paving, for example porcelain, marble or stone. It is the perfect solution for turning non practicable areas into practicable ones, whether they are waterproofed and not, it also allows for the passage of cables, pipes etc that are normally present in offices, shops and work environments. For this reason, raised floors are mainly used in new buildings or in renovation where maximum design and flexibility is required or simply to ease the inspection of the waterproofing layer or any pipes, cables etc. The Adjustable Paving Support Special is produced using only the finest top grade polypropylene and additives, these top quality raw materials ensure its long durability and also increase the load capacity.

The ADJUSTABLE PAVING SUPPORT "SPECIAL JOIST" WITH SELF-LEVELLING HEAD is designed to give a strong and robust support for raised floors. The Adjustable Paving Support Special Joist for raised floors also has one of the highest load capacities available on the market today. Because of its versatility it can be used on both internal or external projects and can also be used with a wide range of decking systems. Thanks to its special head, it is adaptable to any type of joist support structure. It is the perfect solution for turning non practicable areas into practicable ones, whether they are waterproofed and not, it also allows for the passage of cables, pipes etc that are normally present in offices, shops and work environments. For this reason, raised floors are mainly used in new buildings or in renovation where maximum design and flexibility is required or simply to ease the inspection of the waterproofing layer or any pipes, cables etc. The Adjustable Paving Support Special Joist is produced using only the finest top grade polypropylene and additives, these top quality raw materials ensure its long durability and also increase the load capacity.

The ADJUSTABLE PAVING SUPPORT "SPECIAL JOIST" WITH SELF-LEVELLING HEAD is designed to give a strong and robust support for raised floors. The Adjustable Paving Support Special Joist for raised floors also has one of the highest load capacities available on the market today. Because of its versatility it can be used on both internal or external projects and can also be used with a wide range of decking systems. Thanks to its special head, it is adaptable to any type of joist support structure. It is the perfect solution for turning non practicable areas into practicable ones, whether they are waterproofed and not, it also allows for the passage of cables, pipes etc that are normally present in offices, shops and work environments. For this reason, raised floors are mainly used in new buildings or in renovation where maximum design and flexibility is required or simply to ease the inspection of the waterproofing layer or any pipes, cables etc. The Adjustable Paving Support Special Joist is produced using only the finest top grade polypropylene and additives, these top quality raw materials ensure its long durability and also increase the load capacity.

The ADJUSTABLE PAVING SUPPORT “SPECIAL LIGHT” can be used on both internal or external projects, it can also be used with a wide range of different types of paving, for example porcelain, marble or stone. It is the perfect solution for turning non practicable areas into practicable ones, whether they are waterproofed and not, it also allows for the passage of cables, pipes etc that are normally present in offices, shops and work environments. For this reason, raised floors are mainly used in new buildings or in renovation where maximum design and flexibility is required or simply to ease the of inspection the waterproofing layer or any pipes, cables etc. The Adjustable Support Special Light is produced using only the finest top grade polypropylene and additives, these top quality raw materials ensure its long durability and also increase the load capacity.

The ADJUSTABLE PAVING SUPPORT "SPECIAL LIGHT JOIST" can be used on external projects and can also be used with a wide range of decking systems. Thanks to its special head, it is adaptable to any type of joist support structure. It is the perfect solution for turning non practicable areas into practicable ones, whether they are waterproofed and not, it also allows for the passage of cables, pipes etc that are normally present in offices, shops and work environments. For this reason, raised floors are mainly used in new buildings or in renovation where maximum design and flexibility is required or simply to ease the inspection of the waterproofing layer or any pipes, cables, etc. The Adjustable Paving Support Special Light Joist is produced using only the finest top grade polypropylene and additives, these top quality raw materials ensure its long durability and also increase the load capacity.

The ADJUSTABLE PAVING SUPPORT "SPECIAL LIGHT JOIST" can be used on external projects and can also be used with a wide range of decking systems. Thanks to its special head, it is adaptable to any type of joist support structure. It is the perfect solution for turning non practicable areas into practicable ones, whether they are waterproofed and not, it also allows for the passage of cables, pipes etc that are normally present in offices, shops and work environments. For this reason, raised floors are mainly used in new buildings or in renovation where maximum design and flexibility is required or simply to ease the inspection of the waterproofing layer or any pipes, cables, etc. The Adjustable Paving Support Special Light Joist is produced using only the finest top grade polypropylene and additives, these top quality raw materials ensure its long durability and also increase the load capacity.

The ADJUSTABLE PAVING SUPPORT "SPECIAL LIGHT JOIST" can be used on external projects and can also be used with a wide range of decking systems. Thanks to its special head, it is adaptable to any type of joist support structure. It is the perfect solution for turning non practicable areas into practicable ones, whether they are waterproofed and not, it also allows for the passage of cables, pipes etc that are normally present in offices, shops and work environments. For this reason, raised floors are mainly used in new buildings or in renovation where maximum design and flexibility is required or simply to ease the inspection of the waterproofing layer or any pipes, cables, etc. The Adjustable Paving Support Special Light Joist is produced using only the finest top grade polypropylene and additives, these top quality raw materials ensure its long durability and also increase the load capacity.

The ADJUSTABLE PAVING SUPPORT "SPECIAL LIGHT JOIST" can be used on external projects and can also be used with a wide range of decking systems. Thanks to its special head, it is adaptable to any type of joist support structure. It is the perfect solution for turning non practicable areas into practicable ones, whether they are waterproofed and not, it also allows for the passage of cables, pipes etc that are normally present in offices, shops and work environments. For this reason, raised floors are mainly used in new buildings or in renovation where maximum design and flexibility is required or simply to ease the inspection of the waterproofing layer or any pipes, cables, etc. The Adjustable Paving Support Special Light Joist is produced using only the finest top grade polypropylene and additives, these top quality raw materials ensure its long durability and also increase the load capacity.

The ADJUSTABLE PAVING SUPPORT "SPECIAL LIGHT JOIST" can be used on external projects and can also be used with a wide range of decking systems. Thanks to its special head, it is adaptable to any type of joist support structure. It is the perfect solution for turning non practicable areas into practicable ones, whether they are waterproofed and not, it also allows for the passage of cables, pipes etc that are normally present in offices, shops and work environments. For this reason, raised floors are mainly used in new buildings or in renovation where maximum design and flexibility is required or simply to ease the inspection of the waterproofing layer or any pipes, cables, etc. The Adjustable Paving Support Special Light Joist is produced using only the finest top grade polypropylene and additives, these top quality raw materials ensure its long durability and also increase the load capacity.

A light beam that breaks darkness, establishing a new balance inside the living space. Light and shadows alternate, playing with furniture, creating atmospheres with a unique and delicate charm: Nefi, a totally disappearing indoor recessed luminaire made of AirCoral®, installable on plasterboard or brick ceilings, is equipped with a satined glass, creating an armonious diffusion of light. Design and technology, geometry and elegance to flood the space with bright light. AirCoral® body IP40 protection grade 90° light beam inclination Light emission hole 90 x 90 mm Body dimensions 145 x 145 x 120 mm / 145 x 145 x 140 mm / 145 x 145 x 160 mm Light source QR CB 51 dichroic (both halogen and LED) QPAR 16 (both halogen and LED) Professional COB LED LED colour temperature: 3000K (2700K - 4000K available upon request) Push/Dali dimmable LED available upon request

A recessed indoor system made of AirCoral® for plasterboard or brick ceilings designed to become an integral part of the ceiling, Nimbus is completely disappearing from the view once installed. Its satined glass diffuses light in the environment, enhancing the spaces, transforming them in a sight to rediscover every time, defining precise light paths with a distinctive style that speaks the language of design. AirCoral® body IP40 protection grade 90° / adjustable (+- 30°) light beam inclination Dimensions 235 x 235 x 160 mm / 235 x 235 x 200 mm Light emission hole 175x175 mm Light source QR 111 halogen QT-DE 12 halogen TC-TEL fluorescent LED (COB or SMD) LED colour temperature: 3000K

Pipedino Open is an indoor bi-emission wall lamp made of AirCoral® that emanates a concrete light, a uniform guide throughout walls. A diffused light distribution, symmetrical and regular; a direct and indirect light. Walls, ceilings and furniture all get to be enhanced in detail, thanks to a light that gives visual quality. AirCoral® body IP20 protection grade Dimensions 250 x 110 x 90 mm Lamp A60 incandescent QT-DE 12 halogen TC-DEL fluorescent LED LED colour temperature: 3000K ( 2700K - 4000K upon request)

A professional projector in aluminium installable on rail and dust painted: Q2 is ideal to be placed in indoor environments. It has a disappearing, adjustable arm which can be hidden within the body. The different and interchangeable lens, which can be easily replaced without any specific items, best combine functionality and design. A perfect design in which the driver remains hidden in the body of the spotlight. No power supply system visible. Aluminium body IP40 protection grade Adjustable light beam inclination (+- 360°) Projector Ø 60 x 180 mm LED COB lamp professional LED colour temperature 3000 K (2700 - 3500 K - 4000 K on request)

Rhino, an indoor totally disappearing recessed luminaire made of Coral®, installable on plasterboard ceilings or walls, is a versatile product, characterized by an extractable recess with interchangeable lens. It enlights spaces perfectly and in a very incisive way, enriching them with ever-changing plays of light. The projector can be oriented in several ways, in a completely external position or in a recessed one. The latter, conceived to obtain a minimal visual impact. When the projector is not recessed it is 360° adjustable on the horizontal line and 90° on the vertical one. Coral® body IP40 protection grade Adjustable light beam inclination (+- 360°) Light emission hole Ø 50 Dimensions Ø 110 x 100 mm LED lamp COB professional LED colour temperature: 3000K (2700 K - 4000 K on request)

Unleaf is a total recessed luminaire made of AirCoral® and installable on plasterboard or brick walls and ceilings. A perfect cut on the wall, it shapes spaces and architectonic projects with an original luminescent touch. The product surface sinks into the wall, modelling it through light. An underlying, embellishing beam for a lamp of peculiar design and unique elegance; characteristics reflected in the suggestive atmosphere recreated in the environment by the luminaire. AirCoral® body IP20 protection grade Dimensions 450 x 450 x 95 mm LED light source LED colour temperature: 3000 K (on demand 2700 K - 4000 K)

Yang is a bi-emission indoor lamp made of AirCoral® and installable on walls. It has a multifaceted form, a twine of inclined surfaces crossing each other on which the emanated beam plays, creating a juxtaposition of light and shadow. Yang scatters a welcoming light which does not invade spaces, but embraces them. AirCoral® body IP40 protection grade Dimensions 500 x 110 x 90 mm Light source LED LED colour temperature: 3000 K (on demand 2700 K - 4000 K)