Infant prefabricated service console. It consists of a cabinet service module. It contains all medical gases and electrical services for individual treatment. Specify number of electrical outlets and type of console (single or double). Size to be determined by nursery layout. For use in the neonatal ICU.

Counter, console, communications. Consists of one 18” wide base cabinet with two drawers and file drawer, one 30” wide pencil drawer and one 18” wide base cabinet with four drawers. The countertop shall be a composition of wood particle core with plastic laminate surface having a hard smooth surface finish, standard thickness of 1” and a 4” butt backsplash/curb.

A dental treatment console or work station (also called a "12 o'clock unit) approximately 45" W x 72" H x 30" D. Consists of a base unit with storage and equipment drawers, a bifold door cabinet with slide out shelves and CPU storage. A midsection with chase and power bar for ancillary equipment and shelf for a monitor and keyboard. Upper storage unit may be pass-through or non-pass-through with glass shelves and see-through cabinet doors. Unit may also be configured with a pivoting work surface to hold all doctor and assistant instrumentation or with a wash station w/SS sink and knee or foot activated faucet and solid surface or laminate countertop. Unit is also available in other widths and heights. Final makeup of this unit is dependant on individual facility requirements determined at time of purchase.

A dual access, central console for use between two dental operatories. Used in an open floor plan to create a functional wall between operatories to allow sharing of equipment (x-ray), utilities, and a wash station. Unit is approximately 106"W x 24"D x 85"H. Also comes in other widths and heights. This unit is priced with similar components on each side including a dual access x-ray cabinet, storage and dispensing cabinets in the upper section and storage, slide-out shelves and equipment drawers in the base unit. Unit can be configured with various options to meet facility unique requirements. Price may vary.

An accessory or side console/cabinet approximately 60" W x24"D x 32"H for use in a single chair dental operatory. The console may be a left or a right unit used for the dentist or the assistant depending configuration of the operatory. The unit may contain a sink component with waste drop, a round SS sink with faucet and soap dispenser, a solid surface counter top, a drawer storage module with writing surface and equipment drawers, a double door component with swing out shelves and a glove dispenser. Various combinations are available as well as different widths. Configuration of the unit, including whether the unit is right or left, to be determined at time of purchase.

One monitor remote viewing station for picture archiving and retrieval (PACS) system. This station is for use by providers outside of radiology to review images and results. Station includes local image storage, image manipulation, and simultaneous display of multiple images on a single monitor. Images are stored on a resident hard disk and roll off the disk as more recent images are sent to the station by radiology. Provider may request images from the PACS. Unit must be connected to the PACS by LAN for image and result receipt. Console must be DICOM compliant. Input may be by keyboard, mouse, trackball or voice activated commands.

One monitor remote viewing for picture archiving and retrieval (DIN/PACS) system. This station is for use by providers inside or outside radiology to review images. Station includes local image storage, image manipulation and simultaneous display on a 1K X 1K single monitor. Images are stored on a resident memory and roll off to long term storage as more recent images are sent to the station. Provider may request images from the PACS by LAN for image and result receipt. Console must be DICOM compliant. Input may be by keyboard, mouse, trackball or voice activated commands.

Two monitor remote viewing station for picture archiving and retrieval (PACS) system. This station is for use by providers inside or outside of radiology to review images. Station includes local image storage, image manipulation, and simultaneous display of multiple images on two 1200 x 1600 image display monitors. Images are stored on a resident hard disk and roll off the disk as more recent images are sent to the station. Provider may request images from the PACS. Unit must be connected to the PACS by LAN for image and result receipt. This station is for use in areas like radiologist's offices and the E.R. where a more comprehensive system is required. Console must be DICOM compliant. Input may be by keyboard, mouse, trackball or voice activated commands.

A free-standing, cabinet mounted ultrasonic cleaner, rinser and dryer with double stainless steel chambers (minimum sizes 10X24X12). The cleaning chamber includes the following minimum features: power lid, automatic detergent injector, automatic level controls, automatic timer, and switch fill and drain controls. Sonic cleaning energy provided to the chamber by transducers which are powered by a solid-state generator(s) at a frequency of 40 kHz. The rinse/dryer chamber is of the same basic design, size, and construction as the cleaning chamber. However, the chamber has pre-positioned spray nozzles to provide complete rinse and purified-water rinse coverage and thermostatically controlled recirculated forced hot air for drying. Cleaning and rinse/drying chambers are positioned for either right-to-left or left-to-right workflow. Designed for use to clean surgical instruments and other hardware with sonic energy and effectively spray rinse and dry items after sonic cleaning.

Two monitor remote viewing station for picture and retrieval (DIN/PACS) system. This station is for use by providers inside or outside radiology to review images. Station includes local image storage, image manipulation and simultaneous display of multiple images on a two 2048 X 1536 image display monitors. Images are stored on a resident memory and roll off to long term storage as more recent images are sent to the station. Provider may request images from the PACS by LAN for image and result receipt. Console must be DICOM compliant. Input may be by keyboard, mouse, trackball or voice activated commands.

Four monitor remote viewing station for picture and retrieval (DIN/PACS) system. This station is for use by providers inside or outside radiology to review images. Station includes local image storage, image manipulation and simultaneous display of multiple images on four 1260 X 1600 monitors. Images are stored on a resident memory and roll off to long term storage as more recent images are sent to the station. Provider may request images from the PACS by LAN for image and result receipt. Console must be DICOM compliant. Input may be by keyboard, mouse, trackball or voice activated commands.

Create a welcoming entrance with an attractive canopy over the front door! Complete and unique entrance roofs of sheet metal built on a sturdy aluminum frame. This model also has recessed spotlights in the ceiling. Småland craft with a timeless design suitable for all building types. Available in six different colors, all with ceiling in white lacquered aluminum sheet. In width: 1500 mm, 2000 mm and 2430 mm ADVANTAGES Integrated gutter with drainage to the right or left. Optional spotlights. One of the most maintenance-free entrance roofs of sheet metal. Craft-built. Follows the building standards and the CE marking according EN1090-3

Create a welcoming entrance with an attractive canopy over the front door! Complete and unique entrance roofs of sheet metal built on a sturdy aluminum frame. This model also has recessed spotlights in the ceiling. Småland craft with a timeless design suitable for all building types. Available in six different colors, all with ceiling in white lacquered aluminum sheet. In width: 1500 mm, 2000 mm and 2430 mm ADVANTAGES Integrated gutter with drainage to the right or left. Optional spotlights. One of the most maintenance-free entrance roofs of sheet metal. Craft-built. Follows the building standards and the CE marking according EN1090-3

Create a welcoming entrance with an attractive canopy over the front door! Complete and unique entrance roofs of sheet metal built on a sturdy aluminum frame. This model also has recessed spotlights in the ceiling. Småland craft with a timeless design suitable for all building types. Available in six different colors, all with ceiling in white lacquered aluminum sheet. In width: 1500 mm, 2000 mm and 2430 mm ADVANTAGES Integrated gutter with drainage to the right or left. Optional spotlights. One of the most maintenance-free entrance roofs of sheet metal. Craft-built. Follows the building standards and the CE marking according EN1090-3

Create a welcoming entrance with an attractive canopy over the front door! Complete and unique entrance roofs of sheet metal built on a sturdy aluminum frame. This model also has recessed spotlights in the ceiling. Småland craft with a timeless design suitable for all building types. Available in six different colors, all with ceiling in white lacquered aluminum sheet. In width: 1500 mm, 2000 mm and 2430 mm ADVANTAGES Integrated gutter with drainage to the right or left. Optional spotlights. One of the most maintenance-free entrance roofs of sheet metal. Craft-built. Follows the building standards and the CE marking according EN1090-3

Create a welcoming entrance with an attractive canopy over the front door! Complete and unique entrance roofs of sheet metal built on a sturdy aluminum frame. This model also has recessed spotlights in the ceiling. Småland craft with a timeless design suitable for all building types. Available in six different colors, all with ceiling in white lacquered aluminum sheet. In width: 1500 mm, 2000 mm and 2430 mm ADVANTAGES Integrated gutter with drainage to the right or left. Optional spotlights. One of the most maintenance-free entrance roofs of sheet metal. Craft-built. Follows the building standards and the CE marking according EN1090-3

Create a welcoming entrance with an attractive canopy over the front door! Complete and unique entrance roofs of sheet metal built on a sturdy aluminum frame. This model also has recessed spotlights in the ceiling. Småland craft with a timeless design suitable for all building types. Available in six different colors, all with ceiling in white lacquered aluminum sheet. In width: 1500 mm, 2000 mm and 2430 mm ADVANTAGES Integrated gutter with drainage to the right or left. Optional spotlights. One of the most maintenance-free entrance roofs of sheet metal. Craft-built. Follows the building standards and the CE marking according EN1090-3

Create a welcoming entrance with an attractive canopy over the front door! Complete and unique entrance roofs of Glass/Aluminium and stainless steel. Småland craft with a timeless design suitable for all building types. Available in three different colors, and also in three different type of glas with four different consoles. width: 1500 mm, 2000 mm and 2500 mm ADVANTAGES One of the most maintenance-free entrance roofs of glass and stainless steel. Craft-built. Follows the building standards and the CE marking according EN1090-3

Create a welcoming entrance with an attractive canopy over the front door! Complete and unique entrance roofs of Glass/Aluminium and stainless steel. Småland craft with a timeless design suitable for all building types. Available in three different colors, and also in three different type of glas with four different consoles. width: 1500 mm, 2000 mm and 2500 mm ADVANTAGES One of the most maintenance-free entrance roofs of glass and stainless steel. Craft-built. Follows the building standards and the CE marking according EN1090-3

Create a welcoming entrance with an attractive canopy over the front door! Complete and unique entrance roofs of Glass/Aluminium and stainless steel. Småland craft with a timeless design suitable for all building types. Available in three different colors, and also in three different type of glas with four different consoles. width: 1500 mm, 2000 mm and 2500 mm ADVANTAGES One of the most maintenance-free entrance roofs of glass and stainless steel. Craft-built. Follows the building standards and the CE marking according EN1090-3

Create a welcoming entrance with an attractive canopy over the front door! Complete and unique entrance roofs of Glass/Aluminium and stainless steel. Småland craft with a timeless design suitable for all building types. Available in three different colors, and also in three different type of glas with four different consoles. width: 1500 mm, 2000 mm and 2500 mm ADVANTAGES One of the most maintenance-free entrance roofs of glass and stainless steel. Craft-built. Follows the building standards and the CE marking according EN1090-3

Create a welcoming entrance with an attractive canopy over the front door! Complete and unique entrance roofs of Glass/Aluminium and stainless steel. Småland craft with a timeless design suitable for all building types. Available in three different colors, and also in three different type of glas with four different consoles. width: 1500 mm, 2000 mm and 2500 mm ADVANTAGES One of the most maintenance-free entrance roofs of glass and stainless steel. Craft-built. Follows the building standards and the CE marking according EN1090-3

Create a welcoming entrance with an attractive canopy over the front door! Complete and unique entrance roofs of Glass/Aluminium and stainless steel. Småland craft with a timeless design suitable for all building types. Available in three different colors, and also in three different type of glas with four different consoles. width: 1500 mm, 2000 mm and 2500 mm ADVANTAGES One of the most maintenance-free entrance roofs of glass and stainless steel. Craft-built. Follows the building standards and the CE marking according EN1090-3

Create a welcoming entrance with an attractive canopy over the front door! Complete and unique entrance roofs of Glass/Aluminium and stainless steel. Småland craft with a timeless design suitable for all building types. Available in three different colors, and also in three different type of glas with four different consoles. width: 1500 mm, 2000 mm and 2500 mm ADVANTAGES One of the most maintenance-free entrance roofs of glass and stainless steel. Craft-built. Follows the building standards and the CE marking according EN1090-3

Create a welcoming entrance with an attractive canopy over the front door! Complete and unique entrance roofs of Glass/Aluminium and stainless steel. Småland craft with a timeless design suitable for all building types. Available in three different colors, and also in three different type of glas with four different consoles. width: 1500 mm, 2000 mm and 2500 mm ADVANTAGES One of the most maintenance-free entrance roofs of glass and stainless steel. Craft-built. Follows the building standards and the CE marking according EN1090-3

Create a welcoming entrance with an attractive canopy over the front door! Complete and unique entrance roofs of Glass/Aluminium and stainless steel. Småland craft with a timeless design suitable for all building types. Available in three different colors, and also in three different type of glas with four different consoles. width: 1500 mm, 2000 mm and 2500 mm ADVANTAGES One of the most maintenance-free entrance roofs of glass and stainless steel. Craft-built. Follows the building standards and the CE marking according EN1090-3

Create a welcoming entrance with an attractive canopy over the front door! Complete and unique entrance roofs of Glass/Aluminium and stainless steel. Småland craft with a timeless design suitable for all building types. Available in three different colors, and also in three different type of glas with four different consoles. width: 1500 mm, 2000 mm and 2500 mm ADVANTAGES One of the most maintenance-free entrance roofs of glass and stainless steel. Craft-built. Follows the building standards and the CE marking according EN1090-3

Create a welcoming entrance with an attractive canopy over the front door! Complete and unique entrance roofs of Glass/Aluminium and stainless steel. Småland craft with a timeless design suitable for all building types. Available in three different colors, and also in three different type of glas with four different consoles. width: 1500 mm, 2000 mm and 2500 mm ADVANTAGES One of the most maintenance-free entrance roofs of glass and stainless steel. Craft-built. Follows the building standards and the CE marking according EN1090-3

Create a welcoming entrance with an attractive canopy over the front door! Complete and unique entrance roofs of Glass/Aluminium and stainless steel. Småland craft with a timeless design suitable for all building types. Available in three different colors, and also in three different type of glas with four different consoles. width: 1500 mm, 2000 mm and 2500 mm ADVANTAGES One of the most maintenance-free entrance roofs of glass and stainless steel. Craft-built. Follows the building standards and the CE marking according EN1090-3

Adapto-Mensola in truciolare nobilitato,

Adapto-Mensola in truciolare nobilitato,

Adapto-Mensola in truciolare nobilitato,

ADAPTO CONSOLE 700 GLS WHT

ADAPTO CONSOLE 105 GLS WHT

ADAPTO CONSOLE 150X50 WD LBRN

ADAPTO LEG CONSOLE FS

LFTspazio A friendly project and an essential collection based on a "super-oval" accompany the clean shapes of a geometric framework. Adaptable in modern interiors and architectural spaces, perfect for intimate or everyday bathrooms. Accessible, LFT Spazio is light and simple, young and versatile. A concise collection of furniture/accessories is available in oak and coloured lacquer.

Console 160 x 40 cm

Console Table

An upper wall mounted storage cabinet with two adjustable shelves providing additional space for dental supplies and equipment in a dental operative. Cabinet is approximately 34"W x 12"D x 24"H with other widths available. Cabinet is frequently mounted above JSND0680, Console, Accessory/Side, Dental Operatory.

The ophthalmic refraction desk shall be specifically designed to conduct eye examinations in ophthalmic clinics and hospital. It shall have a control console consisting of three rechargeable instrument wells, two 110v auxiliary switches to control accessories, two low voltage switches to control fixation lights, a separate on/off dimmer control for room lights and an indirect ophthalmoscope control with hanger that provides power to the instrument when lifted. This item may include an optional equipment stand/pole with one to three arms and the ability to accept a phoropter arm. There shall be a swivel Lamp and a trial lens drawer.

Floor mounted leg whirlpool. The whirlpool consists of a heavy gauge, leak proof, stainless steel corrosion resistant tank, an electric turbine ejector and aerator, a dial thermometer, a thermostatic water mixing console, a treatment timer and a built-in overflow lip. The database height dimension includes the turbine and the database weight figure is for a filled unit.

Floor mounted leg whirlpool. The whirlpool consists of a heavy gauge stainless steel leak proof tank, an electric turbine ejector and aerator, a dial inside thermometer, hand grips, a drain valve and a thermostatic water mixing console. The unit is used for leg whirlpool treatments. The database weight figure is for a filled tank.

Stress exercise system with treadmill and respiratory/metabolic assessment. The system includes an ECG amplifier, chart recorder, display, console, treadmill and modules for respiratory/metabolic assessment. Used to determine patient's functional capacity, predict and diagnose cardiopulmonary and vascular diseases and for rehabilitation of patients recovering from leg injuries or other type of illness. Some vendors require a NEMA 5-20R non-locking receptacle for their treadmills.

General purpose suction/pressure apparatus. Double stainless steel console unit with a 1/8 HP motor, stand-mounted. Stands include 2 1/2" casters with chemical resistant top. Pumps suction capacity: 22 LPM. Unit includes collection bottle, bacteria filter and suction regulating valve. Used for oral/nasal, tracheal suctioning and other emergency purposes.

Mobile gamma camera system. This unit is a compact scintillation camera system. The characteristics and components include a detector, electronics and a console mounted on a mobile base. The console contains all operating controls and the image display. This unit is used for bedside evaluation of critically ill patients.

Ippari 35 cm console

This product is only available for the Swedish market. Alterna Basic Washbasin, single washbasin for console mounting, made of ceramic. Also available as a complete washbasin set with several different mixers to choose from, delivered complete with plug valve, brackets, water trap, screws and plug. Sizes: W 480 x D 375 x H 145 mm W 525 x D 405 x H 145 mm W 570 x D 425 x H 145 mm W 655 x D 495 x H 145 mm

This product is only available for the Swedish market. Alterna Fixtures are available in the following variables: Alterna WC and bidet fixture for wall-hung WC with tank or bidet. Universal model suitable for WC with center bolt 230 and 180 mm. The fixture have different bolt-heights, which allows for multiple seat heights, depending on the WC that well be installed. Alterna Washbasin fixtures for bolt and bracket washbasin. Universal model that fits most standard washbasins on the market. Available as a fixed as well as adjustable model. C/c measures for wash basin: Bolt distance, c / c: 150/200/280/352 mm (150 mm must be supplemented with nuts, other bolt distances have prepared nuts in the plate) Console hole, c/c distance of fixture: 375/425/510 mm

This product is only available for the Swedish market. Alterna Fixtures are available in the following variables: Alterna WC and bidet fixture for wall-hung WC with tank or bidet. Universal model suitable for WC with center bolt 230 and 180 mm. The fixture have different bolt-heights, which allows for multiple seat heights, depending on the WC that well be installed. Alterna Washbasin fixtures for bolt and bracket washbasin. Universal model that fits most standard washbasins on the market. Available as a fixed as well as adjustable model. C/c measures for wash basin: Bolt distance, c / c: 150/200/280/352 mm (150 mm must be supplemented with nuts, other bolt distances have prepared nuts in the plate) Console hole, c/c distance of fixture: 375/425/510 mm

LFTspazio A friendly project and an essential collection based on a "super-oval" accompany the clean shapes of a geometric framework. Adaptable in modern interiors and architectural spaces, perfect for intimate or everyday bathrooms. Accessible, LFT Spazio is light and simple, young and versatile. A concise collection of furniture/accessories is available in oak and coloured lacquer. LFT spazio is... A rectangular wall hung console, a counter-top sink and two ovals sinks, available either as counter-top or wall hung, a rectangular sink either wall hung or countertop, a built-in oval sink. Wc and bidet with wall or floor outlet, wall hung wc and bidet. Wc and bidet with built-in cistern.

<p>The flagship Crestron® PRO3 is an enterprise-class control system with an enhanced feature set including a front panel color LCD display, built-in control card expansion slots, and a dedicated Control Subnet port. Featuring the 3-Series® control engine, the PRO3 forms the core of any modern networked home or commercial building, managing and integrating all the disparate technologies throughout your facility to make life easier, greener, more productive, and more enjoyable.<br></p><p> <br>3-Series® Control Systems<br>Today's commercial buildings and custom homes comprise more technology than ever before, and all these systems need to be networked, managed, and controlled in fundamentally new ways. The IP based 3-Series platform is engineered from the ground up to deliver a network-grade server appliance capable of faithfully handling everything from boardroom AV and home theater control to total building management.</p> <p>3-Series embodies a distinctively robust, dynamic, and secure platform to elevate your system designs to higher levels of performance and reliability. Compared to other control systems, Crestron 3-Series provides a pronounced increase in processing power and speed with more memory, rock solid networking and IP control, and a unique modular programming architecture.<br> <br>Modular Programming Architecture<br>Designed for enhanced scalability, the PRO3 affords high-speed, real-time multi-tasking to seamlessly run multiple programs simultaneously. This exclusive modular programming architecture lets programmers independently develop and run device-specific programs for AV, lighting, shades, HVAC, security, etc., allowing for the optimization of each program, and allowing changes to be made to one program without affecting the whole. Even as your system grows, processing resources can easily be shifted from one 3-Series processor to another without rewriting any code. The end benefit is dramatically simplified upgradability with minimal downtime, whether implementing changes on site or remotely via the network.<br><br></p><p>Robust Ethernet & IP Control<br>IP technology is the heart of 3-Series, so it should be no surprise that its networking abilities are second to none. Gigabit Ethernet connectivity enables integration with IP-controllable devices and allows the PRO3 to be part of a larger managed control network. Whether residing on a sensitive corporate LAN, a home network, or accessing the Internet through a cable modem, the PRO3 provides secure, reliable interconnectivity with IP-enabled touch screens, computers, mobile devices, video displays, media servers, security systems, lighting, HVAC, and other equipment — whether on premises or across the globe.<br><br></p><p><br></p><p>Dedicated Control Subnet<br>The Crestron Control Subnet is a Gigabit Ethernet network dedicated to Crestron devices. Via the PRO3's Control Subnet port, an installer may simply connect a single touch screen or wireless gateway, or add a Crestron PoE switch (CEN-SW-POE-5 or CEN-SWPOE-16) [1] to handle multiple touch screens, gateways, AV components, and other devices. Auto-configuration of the entire subnet is performed by the PRO3, discovering each device and assigning IP addresses without any extra effort from the installer.<br>A separate LAN port on the PRO3 provides a single-point connection to the primary LAN, requiring just one IP address for the complete control system. The LAN port allows full interconnectivity between devices on the local subnet with other devices, systems, servers, and WAN/Internet connections outside the local subnet. For sensitive applications that require absolute security, the entire Control Subnet can be completely hidden from the primary LAN using Isolation Mode.<br><br></p><p>Control Apps & XPanel<br>Years ago, Crestron pioneered the world's first IP-based control system unleashing vast new possibilities for controlling, monitoring, and managing integrated systems over a LAN, WAN, and the Internet. Today, Crestron offers more ways than ever to control your world the way you want. Using a computer, smartphone, or tablet device, Crestron lets you control anything in your home or workplace from anywhere in the world.<br><br></p><p>Native to every 3-Series control system, Crestron XPanel technology transforms any laptop or desktop computer into a virtual Crestron touch screen. Crestron control apps deliver the Crestron touch screen experience to iPhone®, iPad®, and Android™ devices, letting you safely monitor and control your entire residence or commercial facility using the one device that goes with you everywhere.<br><br></p><p>Crestron Fusion® Cloud<br>Crestron Fusion Cloud provides an integrated platform for creating truly smart buildings that save energy, enhance worker productivity, and prolong the life-span of valuable equipment. As part of a complete managed network in a corporate enterprise, college campus, convention center, or any other facility, the PRO3 works integrally with Crestron Fusion Cloud to enable remote scheduling, monitoring, and control of rooms and technology from a central help desk. It also enables organizations to reduce energy consumption by tracking real-time usage and automating control of lighting, shades, and HVAC.<br><br></p><p>SNMP Support<br>Built-in SNMP support enables integration with third-party IT management software, allowing network administrators to manage and control Crestron systems on the network in an IT-friendly format.<br><br></p><p>Cresnet®<br>Cresnet provides a dependable network wiring solution for Crestron keypads, lighting controls, shade motors, thermostats, occupancy sensors, and other devices that don't require the higher speed of Ethernet. The Cresnet bus offers easy wiring and configuration, carrying bidirectional communication and 24VDC power to each device over a simple 4-conductor cable. To assist with troubleshooting, the PRO3 includes our patent-pending Network Analyzer which continuously monitors the integrity of the Cresnet network for wiring faults, marginal performance, and other errors.<br><br></p><p>Onboard Control Ports<br>In addition to Ethernet, the PRO3 includes six bidirectional COM ports and eight IR ports to interface directly with all of your centralized AV sources, video displays, and other devices. Eight programmable relay ports are included for controlling projection screens, lifts, power controllers, and other contact-closure actuated equipment. Eight "Versiport" I/O ports enable the integration of power sensors, motion detectors, door switches, alarms, or anything else that provides a dry contact closure, low-voltage logic, or 0-10 Volt DC signal.<br><br></p><p>Control Card Expansion Slots<br>Additional control ports can be added to the PRO3 using 3-Series Control Cards [1]. The PRO3 provides three control card expansion slots on its rear panel, affording great expansion capability without requiring any additional rack space.<br><br></p><p>Front Panel Color LCD Display<br>The PRO3's front panel includes a color LCD display to enable extensive setup and diagnostics without having to connect a computer.<br><br></p><p>BACnet™/IP<br>Native support for the BACnet/IP communication protocol provides a direct interface to third-party building management systems over Ethernet, simplifying integration with HVAC, security, fire & life safety, voice & data, lighting, shades, and other systems. Using BACnet/IP, each system runs independently with the ability to communicate together on one platform for a truly smart building.[2]<br>  <br><strong>Key Features</strong><br></p><ul><li>Enterprise-class control system</li><li>3-Series® Control Engine — substantially faster and more powerful than other control systems</li><li>Exclusive modular programming architecture</li><li>Onboard 1GB RAM & 4GB Flash memory</li><li>Expandable storage up to 1TB</li><li>Rear panel memory card slot</li><li>High-speed USB 2.0 host port</li><li>Industry-standard Ethernet and Cresnet® wired communications</li><li>Control Subnet — provides a dedicated local network for Crestron® devices</li><li>XPanel with Smart Graphics™ computer and web based control</li><li>iPhone®, iPad®, and Android™ control app support</li><li>Crestron Fusion® Cloud Enterprise Management Service support</li><li>SNMP remote management support</li><li>Two RS-232/422/485 COM ports with hardware and software handshaking</li><li>Four RS-232 COM ports with software handshaking only</li><li>Eight IR/serial, eight relay, and eight Versiport I/O ports</li><li>Three built-in 3-Series control card expansion slots</li><li>Programmable event scheduling with astronomical time clock</li><li>Native BACnet™/IP support [2]</li><li>IEC 61000-4-5 Installation Class 4 surge immunity on COM, Versiport, and network connections [3]</li><li>Installer setup via front panel, Crestron Toolbox™ software, or web browser</li><li>C#, symbol based, and drag-and-drop programming environments</li><li>Full Unicode (multi-language) support</li><li>Increased network throughput and security</li><li>Secure access through full user/group management or Active Directory integration</li><li>Hardware level security using 802.1X authentication</li><li>TLS, SSL, SSH, and SFTP network security protocols</li><li>FIPS 140-2 compliant encryption</li><li>IIS v.6.0 Web Server</li><li>IPv6 ready</li><li>Front panel color LCD display for setup and diagnostics</li><li>Front panel USB computer console port</li><li>2-space rack-mountable</li></ul><p></p> <p>1. Item(s) sold separately.<br>2. License required. The PRO3 supports a maximum of 2000 BACnet objects when dedicated for BACnet use only. Actual capabilities are contingent upon the overall program size and complexity.<br>3. The following connections comply with IEC 61000-4-5 Installation Class 4 surge immunity levels: COM 1 - 6, I/O 1 - 8, NET, LAN, and CONTROL SUBNET.</p>