#http://www.acrmim.com Régnier Jean-Luc Arch-brick (another version of the arch) note that the texture fit nicely with the direction of the radius, if you have enough bricks ! number of brick fix the value of the brick's width. Thickness and lenght of the bricks are independant value3D parametric, brick arch, with optional\n- lenght of arch (internal)\n- height of arch (internal)\n- Z dimension\n- brick's height\n- brick's thickness\n- number of brick\n- curved bricks\n- reflection /XY

This is simple LEGO blocks. This version is made for ARCHICAD 19 It can be edited in a various bricks, shape and size. The object is just for fun.

Parametric 2D Masonry Unit detail, in plan, elevation and side view (seen as elevation or section - ver 2015.01). For more information contact Nader Belal naderbelal@hotmail.com or visit my blog http://nbbim.wordpress.com/

Calibric structural brick accessories with vertical perforations for 20 cm common masonry

Blocks for plaster available both in concrete or concrete/clay

Fair-faced blocks, available both in concrete and lightweigth concrete ( +clay or + pumice). They are available in different colors

Split concrete blocks, available in different sizes, colors and shades

Striped concrete blocks, available in different sizes and colors

Hemp & Lime building blocks. This range of blocks is made of hemp, lime and other natural materials. Drying is made naturally at the manufacturing site. It provides an enhanced thermal insulation, better building's air quality and humidity control. It reduces the growth of moulds and fungi. Among the results obtained in using hemp blocks there are :energy cost saving and a safer living environment

This special block has been studied in order to create green walls or vertical gardens. It allows plants, flowers, evergreens, to be planted inside . Thanks to the watering system set inside the plants get the water they need to grow and cover the concrete to create a green wall,.

Florablock is a simple but smart system to create retaining walls or flower beds

Facing Brick Smooth White Álava is the affordable choice for those projects that look for a white expression in their façades. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

It stands as the purest white model of La Paloma Cerámica y Gres. A unique texture combined with its spectacular color, make White Smooth Ártico the most in demand among the wide range of La Paloma Cerámica y Gres. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

A beautiful white smooth color that offers striking expressions, White Navarra provides high aesthetic and technical characteristics. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

White Oporto stands out by its smooth sand colour which provides an elegant and shiny look to the façade. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Grey Alicante is the lightest grey of La Paloma Cerámicas. It represents the required transition from white to grey in order to provide an entire color range. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Characterised by slight differences in its tone, Grey Escorial Smooth Brick plays with dark and light tonalities providing spectacular finishes in building façades. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Grey Otero Smooth Brick is presented as the most regular tone within the grey range of La Paloma Cerámicas. With a lighter appearance than Gris Escorial, Gris Otero is one of the most demanded models among klinker quality for both, the current architectural trend and its neutral color. Gris Otero is often used in different combinations. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Brown Asturias presents a brown hue that denotes a slight reddish tint, giving to the product strong charcter and to the façade, simplicity and elegance. This is the intermediate model among the brown range, just below Marrón Laredo and with less prone to red tone than Marrón Mieres. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Brown Galicia presents a brown color with slight differences in tone that provides to building façades high aesthetic and technical characteristics. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Brown Laredo is the darkest model with the most intense pigmentation of the brown range. A higher intense and traditional brown that approaches to what in general speaking is known as "chocolate brown". The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Brown Mieres has the lightest tone within the brown range, located in a chromatic scale between brown and red. Keeping on with current market demands, La Paloma Cerámicas offers a wide range of possibilities for projects that address this range of color. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Negro Lanzarote is the most purely black of La Paloma Cerámicas. Either with clear or dark mortar joints creates in buildings façades an effect of special elegance. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Timanfaya Blue especially attracts attention because of its special set of dark chromatics, offering an alternative to traditional blue façades. With sunlight, its sides offer a spectacular and different set of brightness giving a characteristic flashing image to the façade. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Black Orotava is the third in joining to the range of different blacks. Each one of these models covers a specific market demand. In this case, Negro Orotava brings to the architcts a less dark version of Negro Lanzarote Facing Brick. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Aragón Smooth Ochre is halway in intensity among the ochre range characterised for its variety in tones. Guadarrama will be the bick with less intensity and Castilla will be the darkest choice. Aragón works extremely well in natural environments, for this reason, it is widely used in residential areas with parks and gardens. The 4-face finish allows maximum use of the two stretches, saving in costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Clinker brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Castilla is the original among the ochre flashing range. With an unmistakable appearance countless examples of homes with Castilla Facing Brick are observed along the Spanish geography. Castilla Facing Brick works extremely well in natural environments, for this reason is widely used in residential areas with parks and gardens. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Guadarrama presents the clearest tone of the ochre flashing range. Since company origins this model has accompanied the catalogue and still working perfectly with greater acceptance in residential houses than in buildings, although there are examples of buildings with grat architectural value). The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Levante is a classic model in the catalogue of La Paloma Cerámicas. With an ochre hue and a very slight flashing, Levante draws smooth chromatics in façades. It is ideal for rustic environments. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Red Bilbao is the brick within the red range that does not present tonality variation. With high demand in the north of Spain, its klinker quality gives excellent performance to harsh climates. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Very characteristic from the British Islands, Red Inglés presents different tones of red which randomly placed, shapes an excellent aesthetic. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Red Granada is characterised by its red variety of tones. This unique way of shaping façades, adds aesthetic value in conjuction with a clear mortar joint. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Blue Cobalto Glazed Brick gives light and vitality to the façade. It stands for its characteristic blue bright resistance to time. La Paloma Cerámicas combines a long backgroud manufacturing facing glazed bricks using the latest technology in order to reach high quality finishes. Glazed bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

White Pirineo Matt is the white matt alternative for those projects that look for avoid glossy elements that could distort the original chromatic appearance reqired. It presents a pure white, giving to façades the advantages inherent to this color. La Paloma Cerámicas combines a long backgroud manufacturing facing bricks using the latest technology in order to reach high quality finishes. Pirineo bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

White Pirineo Glazed sets the white difference in façades due to its versatility and adaptability to the environment. A set of brights makes the building an "artistic expression". La Paloma Cerámicas combines a long backgroud manufacturing facing bricks using the latest technology in order to reach high quality finishes. Pirineo bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Black Arrecife gives a clean appearance that stands for its homogeneity. La Paloma Cerámicas combines a long backgroud manufacturing facing bricks using the latest technology in order to reach high quality finishes. Arrecife bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Grey Glazed has a bright finish grey texture. Withing the most demanded models, current architectonic trends look for neutral colors and this grey is presented as an affordable option. La Paloma Cerámicas combines a long backgroud manufacturing facing glazed bricks using the latest technology in order to reach high quality finishes. Glazed bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Green Glazed stands for the intensity of its green bright color. It is especially suitable for residential areas. La Paloma Cerámicas combines a long backgroud manufacturing facing glazed bricks using the latest technology in order to reach high quality finishes. Glazed bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

The range of Brick Slips Klinker of La Paloma Cerámicas is the same as that of Facing Bricks (same texture and color). Easy to fix with adhesive (cement, glue…) and simple tools (trowel, toothed spatula, tile cutter and nails). Fast and easy. Both for renovation or new work, Brick Slip is a fast and clean choice for cladding. Blanco Ártico Brick Slip is the most in demand among the wide range of La Paloma Cerámicas Catalogue. Natural and permanent Colour. The beauty of the stoneware bricks produced by La Paloma Cerámica y Gres is permanent because it achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

The range of Brick Slips Klinker of La Paloma Cerámicas is the same as that of Facing Bricks (same texture and color). Easy to fix with adhesive (cement, glue…) and simple tools (trowel, toothed spatula, tile cutter and nails). Fast and easy. Both for renovation or new work, Brick Slip is a fast and clean choice for cladding. Gris Otero Brick Slip is presented as the most regular tone within the grey range of La Paloma. With a lighter appearance than Gris Escorial, Gris Otero is one of the most demanded models among klinker quality for architectural trend and its neutral color. Gris Otero is often used in different combinations. Natural and permanent Colour. The beauty of the stoneware bricks produced by La Paloma Cerámica y Gres is permanent because it achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

The range of Brick Slips Klinker of La Paloma Cerámicas is the same as that of Facing Bricks (same texture and color). Easy to fix with adhesive (cement, glue…) and simple tools (trowel, toothed spatula, tile cutter and nails). Fast and easy. Both for renovation or new work, Brick Slip is a fast and clean choice for cladding. Ocre Guadarrama Brick Slip presents the clearest tone of the ocre flashing range. Since company origins this model has accompanied the catalogue and still working perfectly with greater acceptance in residential houses than in buildings, although there are examples of buildings with grat architectural value. Natural and permanent Colour. The beauty of the stoneware bricks produced by La Paloma Cerámica y Gres is permanent because it achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

The range of Brick Slips Klinker of La Paloma Cerámicas is the same as that of Facing Bricks (same texture and color). Easy to fix with adhesive (cement, glue…) and simple tools (trowel, toothed spatula, tile cutter and nails). Fast and easy. Both for renovation or new work, Brick Slip is a fast and clean choice for cladding. Rojo Bilbao Brick Slip is the model within red range that does not present tonality variation. With high demand in the north of Spain, its klinker quality gives excellent perormance to harsh climates. Natural and permanent Colour. The beauty of the stoneware bricks produced by La Paloma Cerámica y Gres is permanent because it achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

INSULATION PANEL + BRICK SLIPS. La Paloma Cerámicas develops TermoKlinker; a cobined insulation system of extruded polyestyrene + ceramic brick slips, designed for exterior and interior façade restoration or new buildings. The range of Brick Slips that forms TermoKlinker system is the same as that of Facing Bricks (same texture and color). TermoKlinker is designed and installed in accordance with the European Technical Approval of "Veture kits - Prefabricated units for external wall insulation" (Not ETICS) ETAG 017. The prefabricated veture units panels are made of an insulation material (XPS) bonded in factory to an external discontinuous skin of ceramic slips, with a grouting mortar applied on-site. The panels are fixed with mechanical fixinga and ancillary items. They will be sealed with a sealant and grouted with a grouting cement-based mortar. Acoustic and thermal efficiency of a building, starts in the façade, it is one of the main points to consider, it is the area in which more heat or cold transmission occurs and the main barrier against external noise. There is no doubt that we should avoid thermal bridge effect as far as possible. In this respect, houses also benefit from the high efficiency thermal envelope of a building with TermoKlinker.

INSULATION PANEL + BRICK SLIPS. La Paloma Cerámicas develops TermoKlinker; a cobined insulation system of extruded polyestyrene + ceramic brick slips, designed for exterior and interior façade restoration or new buildings. The range of Brick Slips that forms TermoKlinker system is the same as that of Facing Bricks (same texture and color). TermoKlinker is designed and installed in accordance with the European Technical Approval of "Veture kits - Prefabricated units for external wall insulation" (Not ETICS) ETAG 017. The prefabricated veture units panels are made of an insulation material (XPS) bonded in factory to an external discontinuous skin of ceramic slips, with a grouting mortar applied on-site. The panels are fixed with mechanical fixinga and ancillary items. They will be sealed with a sealant and grouted with a grouting cement-based mortar. Acoustic and thermal efficiency of a building, starts in the façade, it is one of the main points to consider, it is the area in which more heat or cold transmission occurs and the main barrier against external noise. There is no doubt that we should avoid thermal bridge effect as far as possible. In this respect, houses also benefit from the high efficiency thermal envelope of a building with TermoKlinker.

INSULATION PANEL + BRICK SLIPS. La Paloma Cerámicas develops TermoKlinker; a cobined insulation system of extruded polyestyrene + ceramic brick slips, designed for exterior and interior façade restoration or new buildings. The range of Brick Slips that forms TermoKlinker system is the same as that of Facing Bricks (same texture and color). TermoKlinker is designed and installed in accordance with the European Technical Approval of "Veture kits - Prefabricated units for external wall insulation" (Not ETICS) ETAG 017. The prefabricated veture units panels are made of an insulation material (XPS) bonded in factory to an external discontinuous skin of ceramic slips, with a grouting mortar applied on-site. The panels are fixed with mechanical fixinga and ancillary items. They will be sealed with a sealant and grouted with a grouting cement-based mortar. Acoustic and thermal efficiency of a building, starts in the façade, it is one of the main points to consider, it is the area in which more heat or cold transmission occurs and the main barrier against external noise. There is no doubt that we should avoid thermal bridge effect as far as possible. In this respect, houses also benefit from the high efficiency thermal envelope of a building with TermoKlinker.

INSULATION PANEL + BRICK SLIPS. La Paloma Cerámicas develops TermoKlinker; a cobined insulation system of extruded polyestyrene + ceramic brick slips, designed for exterior and interior façade restoration or new buildings. The range of Brick Slips that forms TermoKlinker system is the same as that of Facing Bricks (same texture and color). TermoKlinker is designed and installed in accordance with the European Technical Approval of "Veture kits - Prefabricated units for external wall insulation" (Not ETICS) ETAG 017. The prefabricated veture units panels are made of an insulation material (XPS) bonded in factory to an external discontinuous skin of ceramic slips, with a grouting mortar applied on-site. The panels are fixed with mechanical fixinga and ancillary items. They will be sealed with a sealant and grouted with a grouting cement-based mortar. Acoustic and thermal efficiency of a building, starts in the façade, it is one of the main points to consider, it is the area in which more heat or cold transmission occurs and the main barrier against external noise. There is no doubt that we should avoid thermal bridge effect as far as possible. In this respect, houses also benefit from the high efficiency thermal envelope of a building with TermoKlinker.

Blocks for plaster available both in concrete or concrete/clay

Fair-faced blocks, available both in concrete and lightweigth concrete ( +clay or + pumice). They are available in different colors

Jerusalem joints elegance, tradition and technology. It stands for being a handmade brick development with high technical and aesthetical performance, fundamentally influenced by its long dimension and its handmade characteristic. Ancient manufacturing techniques carryed out for centuries, are now present in this brick that La Paloma Cerámicas has offered to the world of architecture. Warmth and beauty have always being part of stonewhare products, this fact is even more appreciable in this brick. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents.

Jerusalem joints elegance, tradition and technology. It stands for being a handmade brick development with high technical and aesthetical performance, fundamentally influenced by its long dimension and its handmade characteristic. Ancient manufacturing techniques carryed out for centuries, are now present in this brick that La Paloma Cerámicas has offered to the world of architecture. Warmth and beauty have always being part of stonewhare products, this fact is even more appreciable in this brick. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents.

Jerusalem joints elegance, tradition and technology. It stands for being a handmade brick development with high technical and aesthetical performance, fundamentally influenced by its long dimension and its handmade characteristic. Ancient manufacturing techniques carryed out for centuries, are now present in this brick that La Paloma Cerámicas has offered to the world of architecture. Warmth and beauty have always being part of stonewhare products, this fact is even more appreciable in this brick. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents.

Splitted concrete masonry units, with waterproof treatment, for internal and external wall applications. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation, sound insulation and sound absorption. The blocks are not suitable for load bearing walls.

Splitted concrete masonry units, with waterproof treatment, for internal and external wall applications. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation, sound insulation and sound absorption. The blocks are not suitable for load bearing walls.

Splitted concrete masonry units, with waterproof treatment, for internal and external wall applications. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation, sound insulation and sound absorption. The blocks are not suitable for load bearing walls.

Splitted concrete masonry units, with waterproof treatment, for internal and external wall applications. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation, sound insulation and sound absorption. The blocks are not suitable for load bearing walls.

A stone system for flexible, fast and economical masonry for buildings of any size and use. The wall system consists of standard and additional formats.

A stone system for flexible, fast and economical masonry for buildings of any size and use. The wall system consists of standard and additional formats.

A stone system for flexible, fast and economical masonry for buildings of any size and use. The wall system consists of standard and additional formats.

A stone system for flexible, fast and economical masonry for buildings of any size and use. The wall system consists of standard and additional formats. The construction system with the continuous, vertical installation channels over the entire wall height at a distance of 12.5 cm allows simple and substance-friendly integration of electrical and communication lines. Cables are laid in the wall without opening / slitting.

A stone system for flexible, fast and economical masonry for buildings of any size and use. The wall system consists of standard and additional formats. The construction system with the continuous, vertical installation channels over the entire wall height at a distance of 12.5 cm allows simple and substance-friendly integration of electrical and communication lines. Cables are laid in the wall without opening / slitting.

A stone system for flexible, fast and economical masonry for buildings of any size and use. The wall system consists of standard and additional formats. The construction system with the continuous, vertical installation channels over the entire wall height at a distance of 12.5 cm allows simple and substance-friendly integration of electrical and communication lines. Cables are laid in the wall without opening / slitting.

A stone system for flexible, fast and economical masonry for buildings of any size and use. The wall system consists of standard and additional formats. The construction system with the continuous, vertical installation channels over the entire wall height at a distance of 12.5 cm allows simple and substance-friendly integration of electrical and communication lines. Cables are laid in the wall without opening / slitting.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateproof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateproof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateproof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateproof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateproof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateproof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Structural brick with hydraulic glued installation. Masonry thickness 20 cm, Insulating type a

Calibric structural brick accessories with vertical perforations for 20 cm common masonry

Calibric structural brick accessories with vertical perforations for 20 cm common masonry

Calibric structural brick accessories with vertical perforations for 20 cm common masonry

Structural brick with hydraulic glued installation. Masonry thickness 20 cm, Insulating type a

Monolitic clay brick accessory

Monolitic clay brick accessory

Monolitic clay brick accessory

Monolitic clay brick accessory

Highlight your windows with monolitics sills. The insulated monolithic sills allow to treat the sills on large dimensions without joints. They are available in 3 colors: orange red, champagne, anthracite, to adapt perfectly to any style: modern or traditional.

Highlight your windows with monolitics sills. The insulated monolithic sills allow to treat the sills on large dimensions without joints. They are available in 3 colors: orange red, champagne, anthracite, to adapt perfectly to any style: modern or traditional.

Specific clay brick accessory used to reduce thermical bridge located on the wall/floor junction

Specific clay brick accessory used to reduce thermical bridge located on the wall/floor junction

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are suitable also for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are suitable also for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are suitable also for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are suitable also for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are suitable also for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are suitable also for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

Concrete masonry units for internal and external wall applications. The blocks are available in "dense" or "lightweight" concrete, "intonaco" (rough) or "facciavista" (smooth) surface and with or without wateprof treatment. The units are suitable for several use: partition, curtain, facing and cavity wall. They can provide fire protection, thermal insulation and sound insulation. The blocks are not suitable for load bearing walls.

- used for Dörken

Radioisotope fumehood. The unit requires a charcoal trap filter, lead-lined or HEPA filter as required by codes and use criteria in the exhaust stack, not part of this hood. Other characteristics are that it be strong enough to support lead shielding bricks, have at least two duplex receptacles and a cup sink. The minimum average face velocity shall be 100 fpm and the static pressure loss through the hood shall not exceed 0.2 inches of water at 100 fpm face velocity (700 CFM).

External thermal insulation composite system with rendering (ETICS) intended to be used on external walls made of concrete or masonry, for new or existing buildings. PARISO PSE - M is composed of a thin mineral base coat reinforced with a glass fibre mesh and applied onto expanded polystyrene panels (white or grey) bonded or mechanically-fixed with anchors to the substrate. Various finishing coats are associated to the system: - Thick mineral rendering - Thin mineral renderings - Silicate renderings - Marble aggregates - burnt clay facing bricks - FR containing-organic renderings - FR containing-organic and siloxane rendering

External thermal insulation composite system with rendering (ETICS) intended to be used on external walls made of concrete or masonry, for new or existing buildings. PARISO PSE - M is composed of a thin mineral base coat reinforced with a glass fibre mesh and applied onto mineral stone wool panels (one-density or dual-density) mechanically-fixed with anchors to the substrate. Various finishing coats are associated to the system: - Thick mineral rendering - Thin mineral renderings - Silicate renderings - Marble aggregates - Burnt-clay facing bricks - FR containing-organic renderings - FR containing-organic and siloxane rendering

Silka XL Plus - factory cut to fit Silka XL Plus is the all-inclusive package for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. Silka XL Plus is factory cut to fit and supplied as a complete kit including optimized object-specific installation plans just-in-time to the construction site. The tailor-made delivery replaces the cutting on the site. The noise of the saws and the sawing waste remain in business. Silka XL Plus is used where the highest level of planning and execution security is required. Advantages Property-related wall kit - sawmill waste and –noise remain in factory Laying plan creation and delivery of required components occur "Just in Time" Processing with Mini-Crane reduces physical strain Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 Optimal heat protection in summer As a full stone an ideal mounting base Silka Facing bricks are available in numerous shapes and designs, give each architecture a unique character and guarantee a long lasting pleasure. Silka Facing bricks are freeze-thaw resistant calcium silicate units and are mainly used in the outer shell of double layer exterior walls, in garden walls or in facing masonry with higher requirements on the appearance. Advantages: Noise reduction included Durable and maintenance-free facade Tough and with increased freeze-thaw resitance

Silka XL Plus - factory cut to fit Silka XL Plus is the all-inclusive package for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. Silka XL Plus is factory cut to fit and supplied as a complete kit including optimized object-specific installation plans just-in-time to the construction site. The tailor-made delivery replaces the cutting on the site. The noise of the saws and the sawing waste remain in business. Silka XL Plus is used where the highest level of planning and execution security is required. Advantages Property-related wall kit - sawmill waste and –noise remain in factory Laying plan creation and delivery of required components occur "Just in Time" Processing with Mini-Crane reduces physical strain Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 Optimal heat protection in summer As a full stone an ideal mounting base Silka Facing bricks are available in numerous shapes and designs, give each architecture a unique character and guarantee a long lasting pleasure. Silka Facing bricks are freeze-thaw resistant calcium silicate units and are mainly used in the outer shell of double layer exterior walls, in garden walls or in facing masonry with higher requirements on the appearance. Advantages: Noise reduction included Durable and maintenance-free facade Tough and with increased freeze-thaw resitance

Silka XL Plus - factory cut to fit Silka XL Plus is the all-inclusive package for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. Silka XL Plus is factory cut to fit and supplied as a complete kit including optimized object-specific installation plans just-in-time to the construction site. The tailor-made delivery replaces the cutting on the site. The noise of the saws and the sawing waste remain in business. Silka XL Plus is used where the highest level of planning and execution security is required. Advantages Property-related wall kit - sawmill waste and –noise remain in factory Laying plan creation and delivery of required components occur "Just in Time" Processing with Mini-Crane reduces physical strain Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 Optimal heat protection in summer As a full stone an ideal mounting base Silka Facing bricks are available in numerous shapes and designs, give each architecture a unique character and guarantee a long lasting pleasure. Silka Facing bricks are freeze-thaw resistant calcium silicate units and are mainly used in the outer shell of double layer exterior walls, in garden walls or in facing masonry with higher requirements on the appearance. Advantages: Noise reduction included Durable and maintenance-free facade Tough and with increased freeze-thaw resitance

Silka XL Plus - factory cut to fit Silka XL Plus is the all-inclusive package for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. Silka XL Plus is factory cut to fit and supplied as a complete kit including optimized object-specific installation plans just-in-time to the construction site. The tailor-made delivery replaces the cutting on the site. The noise of the saws and the sawing waste remain in business. Silka XL Plus is used where the highest level of planning and execution security is required. Advantages Property-related wall kit - sawmill waste and –noise remain in factory Laying plan creation and delivery of required components occur "Just in Time" Processing with Mini-Crane reduces physical strain Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 Optimal heat protection in summer As a full stone an ideal mounting base Silka Facing bricks are available in numerous shapes and designs, give each architecture a unique character and guarantee a long lasting pleasure. Silka Facing bricks are freeze-thaw resistant calcium silicate units and are mainly used in the outer shell of double layer exterior walls, in garden walls or in facing masonry with higher requirements on the appearance. Advantages: Noise reduction included Durable and maintenance-free facade Tough and with increased freeze-thaw resitance

External thermal insulation composite system with rendering (ETICS) intended to be used on external walls made of concrete or masonry, for new or existing buildings. PARISO PSE - M is composed of a thin mineral base coat reinforced with a glass fibre mesh and applied onto expanded polystyrene panels (white or grey) bonded or mechanically-fixed with anchors to the substrate. Various finishing coats are associated to the system: - Thick mineral rendering - Thin mineral renderings - Silicate renderings - Marble aggregates - burnt clay facing bricks - FR containing-organic renderings - FR containing-organic and siloxane rendering

Thermoreal®-Gebrik® is a 1m², 60mm thick panel made of clay bricks elements bonded to insulating polyurethane foam. It is fixed to the concrete, masonry or wood frame by mechanical fasteners and may be completed with additional insulation - up to 220mm thick – to reach a high thermal resistance, depending the insulated material chosen. With its wide range of colours, in smooth or sanded finish, it allows give the aesthetics of an authentic wall brick and taking the advantage of an efficient and economical system of external thermal insulation.

Satin wall tile in neutral colors, inspired by the classics London bricks. Application with dry gout. White, brown, gray, terracotta, satin, dry grout.

Satin wall tile in neutral colors, inspired by the classics London bricks. Application with dry gout. White, brown, gray, terracotta, satin, dry grout.

Satin wall tile in neutral colors, inspired by the classics London bricks. Application with dry gout. White, brown, gray, terracotta, satin, dry grout.

Satin wall tile in neutral colors, inspired by the classics London bricks. Application with dry gout. White, brown, gray, terracotta, satin, dry grout.