tileable Hebel wall finish, create for fence or partition

Bifold double door.

Sliding folding door with optional number of panels.

double blind vent block

sreated by yudhy novianto for his home

rectangle loster with circle as center

Double door with arch top.

Sliding Door Two Panels OR French Door Vent-Fixed

Double door with arch top and transom.

Sliding Door Three Panels Bypass

Sliding Door Three Panels OR French Door Vent-Fixed-Vent.

Sliding Door Four Panels OR French Door Fixed-Vent-Vent-Fixed.

Bifold door.

Door with arch top and transom.

Door with arch top.

Sliding folding double door with optional number of panels.

Overhead garage door.

Vertical sliding garage door.

Overhead sectional garage door.

Overhead garage door with arch top.

Vertical sliding garage door with arch top.

Garage double door.

Garage double door with arch top.

Pivot door.

#http://www.acrmim.com Régnier Jean-Luc Arch-brick (another version of the arch) note that the texture fit nicely with the direction of the radius, if you have enough bricks ! number of brick fix the value of the brick's width. Thickness and lenght of the bricks are independant value3D parametric, brick arch, with optional\n- lenght of arch (internal)\n- height of arch (internal)\n- Z dimension\n- brick's height\n- brick's thickness\n- number of brick\n- curved bricks\n- reflection /XY

Linear brick masonry arch.

Linear brick masonry jack-arch.

Segmental brick masonry arch.

Parede de Tijolos Paramétricos made with ❤ by PARAM-O.

Overhead garage door.

POROTON 30X25

Concrete brick, permeable paving

VARIO R 921 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

Sliding Door Three Panels Bypass

Vertical sliding garage door.

Overhead sectional garage door.

Garage double door.

Armabeam fast wall brick lintel

Garage double door with arch top.

Sliding Door Three Panels Bypass

Bifold door.

Sliding folding door with optional number of panels.

Offering outstanding product properties including lightweight flexible application and a natural brick appearance, alsecco acrylic brick slips offer infinite design possibilities. Manufactured from high quality raw materials, the handcrafted acrylic slips ensure a versatile, impressive and durable facade for your next project. All system components are carefully matched, offer the highest level of technical reliability and are fully compatable with alsecco's facade systems.

Offering outstanding product properties including lightweight flexible application and a natural brick appearance, alsecco acrylic brick slips offer infinite design possibilities.Manufactured from high quality raw materials, the handcrafted acrylic slips ensure a versatile, impressive and durable facade for your next project. All system components are carefully matched, offer the highest level of technical reliability and are fully compatable with alsecco's facade systems.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

Frontiss Brick is a self-ventilated facing brick, which has a built-sheet outer shadow. This self-ventilated facing brick solution allows to obtain the combined result of the properties of a conventional brick façade and a ventilated one. Frontiss Brick design, is specially designed to be easily identifiable in each of the two following specialized areas; 1 - An area with common design of a conventional facing brick, whose function will be appropiate to this type of bricks that will be located towards the interior of the wall. 2 - A scond area, located to the outside of the wall, composed of air chambers that will allow air circulation and renewal through them. Its design allows easy extraction of the universal basic part by cutting smaller pieces that serve to provide a solution for so many joints and specially for corner joints. These spaial pieces will allways incorporate an external air chamber Due to its special special design, frontiss Brick has an autonomous ventilation system. Like any other ventilated façade, has a hygrothermic function, working in two directions: 1 - Releases the stored heat by exposure to direct sunlight. 2 - Reduces thermal shock on the front, avoiding the humidity saturation and producing a drying effect. With Frontiss Brick air circulates from the bottom to up through the pall, and also flows through the joints between bricks scattered all over façade, improving the ability to ventilate.

The range of Brick Slips Klinker of La Paloma Cerámicas is the same as that of Facing Bricks (same texture and color). Easy to fix with adhesive (cement, glue…) and simple tools (trowel, toothed spatula, tile cutter and nails). Fast and easy. Both for renovation or new work, Brick Slip is a fast and clean choice for cladding. Blanco Ártico Brick Slip is the most in demand among the wide range of La Paloma Cerámicas Catalogue. Natural and permanent Colour. The beauty of the stoneware bricks produced by La Paloma Cerámica y Gres is permanent because it achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

The range of Brick Slips Klinker of La Paloma Cerámicas is the same as that of Facing Bricks (same texture and color). Easy to fix with adhesive (cement, glue…) and simple tools (trowel, toothed spatula, tile cutter and nails). Fast and easy. Both for renovation or new work, Brick Slip is a fast and clean choice for cladding. Gris Otero Brick Slip is presented as the most regular tone within the grey range of La Paloma. With a lighter appearance than Gris Escorial, Gris Otero is one of the most demanded models among klinker quality for architectural trend and its neutral color. Gris Otero is often used in different combinations. Natural and permanent Colour. The beauty of the stoneware bricks produced by La Paloma Cerámica y Gres is permanent because it achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

The range of Brick Slips Klinker of La Paloma Cerámicas is the same as that of Facing Bricks (same texture and color). Easy to fix with adhesive (cement, glue…) and simple tools (trowel, toothed spatula, tile cutter and nails). Fast and easy. Both for renovation or new work, Brick Slip is a fast and clean choice for cladding. Ocre Guadarrama Brick Slip presents the clearest tone of the ocre flashing range. Since company origins this model has accompanied the catalogue and still working perfectly with greater acceptance in residential houses than in buildings, although there are examples of buildings with grat architectural value. Natural and permanent Colour. The beauty of the stoneware bricks produced by La Paloma Cerámica y Gres is permanent because it achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

The range of Brick Slips Klinker of La Paloma Cerámicas is the same as that of Facing Bricks (same texture and color). Easy to fix with adhesive (cement, glue…) and simple tools (trowel, toothed spatula, tile cutter and nails). Fast and easy. Both for renovation or new work, Brick Slip is a fast and clean choice for cladding. Rojo Bilbao Brick Slip is the model within red range that does not present tonality variation. With high demand in the north of Spain, its klinker quality gives excellent perormance to harsh climates. Natural and permanent Colour. The beauty of the stoneware bricks produced by La Paloma Cerámica y Gres is permanent because it achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Jerusalem joints elegance, tradition and technology. It stands for being a handmade brick development with high technical and aesthetical performance, fundamentally influenced by its long dimension and its handmade characteristic. Ancient manufacturing techniques carryed out for centuries, are now present in this brick that La Paloma Cerámicas has offered to the world of architecture. Warmth and beauty have always being part of stonewhare products, this fact is even more appreciable in this brick. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents.

Jerusalem joints elegance, tradition and technology. It stands for being a handmade brick development with high technical and aesthetical performance, fundamentally influenced by its long dimension and its handmade characteristic. Ancient manufacturing techniques carryed out for centuries, are now present in this brick that La Paloma Cerámicas has offered to the world of architecture. Warmth and beauty have always being part of stonewhare products, this fact is even more appreciable in this brick. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents.

Jerusalem joints elegance, tradition and technology. It stands for being a handmade brick development with high technical and aesthetical performance, fundamentally influenced by its long dimension and its handmade characteristic. Ancient manufacturing techniques carryed out for centuries, are now present in this brick that La Paloma Cerámicas has offered to the world of architecture. Warmth and beauty have always being part of stonewhare products, this fact is even more appreciable in this brick. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents.

"Character" is an exterior door range with unique design solutions. Its glass openings without strips and screws sets a new standard for design. Now you can create an entrance with a very stylish and self-expression. The finish, the concealed hinges, the solid construction and the patented design solutions also contribute to the exclusive feel that Character conveys.

Experts in construction work through the centuries have used brick as a load-bearing element. The extraordinary beauty of ancient vaults and facades constructed with this material emphasize its aesthetical value. The Antico Mattone collection of Pietre d’Arredo, is a faithful reproduction of old terracotta brick shades. The Pietre d'Arredo finishing elements are made using special binding materials, natural lightweight aggregate, alongside colouring pigments that are highly resistant to UV rays and additives, which render the product incredibly resistant to atmospheric agents. WHY CHOOSE PIETRE D’ARREDO? The innovative manufacturing technique allows for minimum waste and the accurate definition of surfaces makes it a perfect substitute for natural stone, limiting extraction from the quarry, thus respecting and protecting the environment. It protects the building enclosure from weather conditions and fortifies thermal insulation systems, thus improving living comfort. It facilitates application because of its light weight. USES Identical, aesthetically speaking, to their natural counterparts, the Pietre d'Arredo finishing elements can be used for new projects as well as in the re-qualification of older buildings being restructured. As a result of their versatility, they can be used to clad both internal and external walls, retaining walls, columns, fireplaces, wainscoting, etc.

Decorative, TERREAL facing brick also plays an essential role in terms of thermal insulation of buildings, especially when protecting an insulated material between brick and strucural wall. It also benefits of a high resistance to external aggression such as UV, wind, frost and other climatic hazards.

Decorative, TERREAL facing brick also plays an essential role in terms of thermal insulation of buildings, especially when protecting an insulated material between brick and strucural wall. It also benefits of a high resistance to external aggression such as UV, wind, frost and other climatic hazards.

TERREAL Terracotta Brick slips is an alternative to traditional facing brick. More economical, and lighther, it is once installed undifferentiated from a traditional brickworks wall. Softness of the smooth finish, authenticity of the hand-molded, rusticity of textured, or shine of the glazed will all catch to your senses.

Satin wall tile in neutral colors, inspired by the classics London bricks. Application with dry gout. White, brown, gray, terracotta, satin, dry grout.

Satin wall tile in neutral colors, inspired by the classics London bricks. Application with dry gout. White, brown, gray, terracotta, satin, dry grout.

Satin wall tile in neutral colors, inspired by the classics London bricks. Application with dry gout. White, brown, gray, terracotta, satin, dry grout.

Satin wall tile in neutral colors, inspired by the classics London bricks. Application with dry gout. White, brown, gray, terracotta, satin, dry grout.

Bright wall tile with a wide variety of colors. Application with dry gout. Black, green, gris, light blue, marsala, orange, quartz, red, royal blue, suede, white, yellow, bright, dry grout.

Bright wall tile with a wide variety of colors. Application with dry gout. Black, green, gris, light blue, marsala, orange, quartz, red, royal blue, suede, white, yellow, bright, dry grout.

Bright wall tile with a wide variety of colors. Application with dry gout. Black, green, gris, light blue, marsala, orange, quartz, red, royal blue, suede, white, yellow, bright, dry grout.

Bright wall tile with a wide variety of colors. Application with dry gout. Black, green, gris, light blue, marsala, orange, quartz, red, royal blue, suede, white, yellow, bright, dry grout.

Bright wall tile with a wide variety of colors. Application with dry gout. Black, green, gris, light blue, marsala, orange, quartz, red, royal blue, suede, white, yellow, bright, dry grout.

Bright wall tile with a wide variety of colors. Application with dry gout. Black, green, gris, light blue, marsala, orange, quartz, red, royal blue, suede, white, yellow, bright, dry grout.

Bright wall tile with a wide variety of colors. Application with dry gout. Black, green, gris, light blue, marsala, orange, quartz, red, royal blue, suede, white, yellow, bright, dry grout.

Bright wall tile with a wide variety of colors. Application with dry gout. Black, green, gris, light blue, marsala, orange, quartz, red, royal blue, suede, white, yellow, bright, dry grout.

Bright wall tile with a wide variety of colors. Application with dry gout. Black, green, gris, light blue, marsala, orange, quartz, red, royal blue, suede, white, yellow, bright, dry grout.

Bright wall tile with a wide variety of colors. Application with dry gout. Black, green, gris, light blue, marsala, orange, quartz, red, royal blue, suede, white, yellow, bright, dry grout.

Bright wall tile with a wide variety of colors. Application with dry gout. Black, green, gris, light blue, marsala, orange, quartz, red, royal blue, suede, white, yellow, bright, dry grout.

Bright wall tile with a wide variety of colors. Application with dry gout. Black, green, gris, light blue, marsala, orange, quartz, red, royal blue, suede, white, yellow, bright, dry grout.

Thermally insulated external basement wall with lime-sand brick (U-value: 0,318 W / m² • K) and with self-adhesive baseline waterproofing DELTA®-THENE for the water impact class soil moisture and non-pressing water for floor slabs and walls in contact with the earth with drainage (W1.2-E) according to DIN 18533 (Waterproofing of elements in contact with soil). The DELTA®-THENE conforms to the requirements of EN 13969. The DELTA®-TERRAXX protection and drainage system conforms to the requirements of EN 13252 (Geotextiles and geotextile-related products) and complies with the requirements of DIN 4095 (Drainage for the protection of building structures), is free of recycled material and has a tested long-term stability of 100 years. The information under the specifications correspond to the reality. When creating the BIM objects, adjustments had to be made to the respective software. For this reason, slight deviations may occur during automatic calculations, which require a check of the results.

- used for Dörken

Bifold double door.

Sliding folding double door with optional number of panels.

Door with arch top and transom.

Door with arch top.

Double door with arch top and transom.

Double door with arch top.

Sliding Door Three Panels OR French Door Vent-Fixed-Vent.

Sliding Door Two Panels OR French Door Vent-Fixed

Sliding Door Four Panels OR French Door Fixed-Vent-Vent-Fixed.

CARBONA R565 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

CLASSIC R 400 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

SALINA R 580 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

VARIO R 931 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

VARIO R 932 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

VARIO R 941 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

Vascu R 752 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

Vascu_R 757 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

VASCU R 764 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

VASCU R 773 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

VASCU R 775 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

Pivot door.

Sliding Door Two Panels OR French Door Vent-Fixed

Overhead garage door with arch top.

Vertical sliding garage door with arch top.

Sliding Door Three Panels OR French Door Vent-Fixed-Vent.

Sliding Door Four Panels OR French Door Fixed-Vent-Vent-Fixed.

Mattone, Parete in Mattoni, Wall Brick

Linear brick masonry arch.

Linear brick masonry jack-arch.

Segmental brick masonry arch.

Barcode challenges the uniformity and rigidity of conventional linear low level loop pile tiles and, with its confident bands of contrasting colours in varying widths, delivers a more eclectic and exuberant look that is right on trend for today’s commercial environments. Barcode is offered in 18 colourways, each featuring five individual tonal and contrasting shades drawing from the latest colour palette of solution dyed yarns, carefully selected and blended to harmonise with a wide range of interior design schemes. Barcode can be laid in a variety of styles including brick, tessellated, quarter-turn or the quirky alternative, quarter-brick, to create a range of different aesthetic effects.

A thick coat, EPS-insulation, external wall insulation facade system which is faced with brick slips or ceramic tiles, offering a greater degree of impact resistance. Offering clay slips in every conceivable colour and shade, collection alsecco ensures creativity for your next project. Alsecco has the capacity and expertise to source exactly the right brick for your specification, with the added advantage of being able to offer the complete system solution for your façade. Clay slips are either extruded as purpose made slips or the chosen brick is cut to around 15mm to form the slip. Either way, once the slips are pointed they have the same appearance a regular masonry, offering huge advantages.

A thick coat, EPS-insulation, external wall insulation facade system which is faced with brick slips or ceramic tiles, offering a greater degree of impact resistance. Collection alsecco also offers stone slips as a design choice for your project’s façade including polished natural granite and marble. On certain projects only stone is the option due to planning restrictions or just to create the architect’s vision. Alsecco can provide whatever type of stone you require, whether contemporary, rustic or traditional, and with four options in terms of manufacturing and sourcing, the design choice is endless.

A thick coat, mineral wool, external wall insulation facade system which is faced with brick slips or ceramic tiles, offering a greater degree of impact resistance. Offering clay slips in every conceivable colour and shade, collection alsecco ensures creativity for your next project. Alsecco has the capacity and expertise to source exactly the right brick for your specification, with the added advantage of being able to offer the complete system solution for your façade. Clay slips are either extruded as purpose made slips or the chosen brick is cut to around 15mm to form the slip. Either way, once the slips are pointed they have the same appearance a regular masonry, offering huge advantages.

A thick coat, mineral wool, external wall insulation facade system which is faced with brick slips or ceramic tiles, offering a greater degree of impact resistance. Collection alsecco also offers stone slips as a design choice for your project’s façade including polished natural granite and marble. On certainprojects only stone is the option due to planning restrictions or just to create the architect’s vision. Alsecco can provide whatever type of stone you require, whether contemporary, rustic or traditional, and with four options in terms of manufacturing and sourcing, the design choice is endless.

A thick coat, EPS-insulation, external wall insulation facade system which is faced with brick slips or ceramic tiles, offering a greater degree of impact resistance. Offering clay slips in every conceivable colour and shade, collection ensures creativity for your next project. Caparol has the capacity and expertise to source exactly the right brick for your specification, with the added advantage of being able to offer the complete system solution for your façade. Clay slips are either extruded as purpose made slips or the chosen brick is cut to around 15mm to form the slip. Either way, once the slips are pointed they have the same appearance a regular masonry, offering huge advantages.

A thick coat, mineral wool, external wall insulation facade system which is faced with brick slips or ceramic tiles, offering a greater degree of impact resistance. Offering clay slips in every conceivable colour and shade, collection ensures creativity for your next project. Caparol has the capacity and expertise to source exactly the right brick for your specification, with the added advantage of being able to offer the complete system solution for your façade. Clay slips are either extruded as purpose made slips or the chosen brick is cut to around 15mm to form the slip. Either way, once the slips are pointed they have the same appearance a regular masonry, offering huge advantages.

A thick coat, EPS-insulation, external wall insulation facade system which is faced with brick slips or ceramic tiles, offering a greater degree of impact resistance. collection also offers stone slips as a design choice for your project’s façade including polished natural granite and marble. On certain projects only stone is the option due to planning restrictions or just to create the architect’s vision. Caparol can provide whatever type of stone you require, whether contemporary, rustic or traditional, and with four options in terms of manufacturing and sourcing, the design choice is endless.

A thick coat, mineral wool, external wall insulation facade system which is faced with brick slips or ceramic tiles, offering a greater degree of impact resistance. collection also offers stone slips as a design choice for your project’s façade including polished natural granite and marble. On certain projects only stone is the option due to planning restrictions or just to create the architect’s vision. Caparol can provide whatever type of stone you require, whether contemporary, rustic or traditional, and with four options in terms of manufacturing and sourcing, the design choice is endless.

Facing Brick Smooth White Álava is the affordable choice for those projects that look for a white expression in their façades. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

It stands as the purest white model of La Paloma Cerámica y Gres. A unique texture combined with its spectacular color, make White Smooth Ártico the most in demand among the wide range of La Paloma Cerámica y Gres. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

A beautiful white smooth color that offers striking expressions, White Navarra provides high aesthetic and technical characteristics. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

White Oporto stands out by its smooth sand colour which provides an elegant and shiny look to the façade. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Grey Alicante is the lightest grey of La Paloma Cerámicas. It represents the required transition from white to grey in order to provide an entire color range. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Characterised by slight differences in its tone, Grey Escorial Smooth Brick plays with dark and light tonalities providing spectacular finishes in building façades. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Grey Otero Smooth Brick is presented as the most regular tone within the grey range of La Paloma Cerámicas. With a lighter appearance than Gris Escorial, Gris Otero is one of the most demanded models among klinker quality for both, the current architectural trend and its neutral color. Gris Otero is often used in different combinations. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Brown Asturias presents a brown hue that denotes a slight reddish tint, giving to the product strong charcter and to the façade, simplicity and elegance. This is the intermediate model among the brown range, just below Marrón Laredo and with less prone to red tone than Marrón Mieres. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Brown Galicia presents a brown color with slight differences in tone that provides to building façades high aesthetic and technical characteristics. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Brown Laredo is the darkest model with the most intense pigmentation of the brown range. A higher intense and traditional brown that approaches to what in general speaking is known as "chocolate brown". The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Brown Mieres has the lightest tone within the brown range, located in a chromatic scale between brown and red. Keeping on with current market demands, La Paloma Cerámicas offers a wide range of possibilities for projects that address this range of color. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Negro Lanzarote is the most purely black of La Paloma Cerámicas. Either with clear or dark mortar joints creates in buildings façades an effect of special elegance. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Timanfaya Blue especially attracts attention because of its special set of dark chromatics, offering an alternative to traditional blue façades. With sunlight, its sides offer a spectacular and different set of brightness giving a characteristic flashing image to the façade. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Black Orotava is the third in joining to the range of different blacks. Each one of these models covers a specific market demand. In this case, Negro Orotava brings to the architcts a less dark version of Negro Lanzarote Facing Brick. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Aragón Smooth Ochre is halway in intensity among the ochre range characterised for its variety in tones. Guadarrama will be the bick with less intensity and Castilla will be the darkest choice. Aragón works extremely well in natural environments, for this reason, it is widely used in residential areas with parks and gardens. The 4-face finish allows maximum use of the two stretches, saving in costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Clinker brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Castilla is the original among the ochre flashing range. With an unmistakable appearance countless examples of homes with Castilla Facing Brick are observed along the Spanish geography. Castilla Facing Brick works extremely well in natural environments, for this reason is widely used in residential areas with parks and gardens. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Guadarrama presents the clearest tone of the ochre flashing range. Since company origins this model has accompanied the catalogue and still working perfectly with greater acceptance in residential houses than in buildings, although there are examples of buildings with grat architectural value). The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Levante is a classic model in the catalogue of La Paloma Cerámicas. With an ochre hue and a very slight flashing, Levante draws smooth chromatics in façades. It is ideal for rustic environments. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Red Bilbao is the brick within the red range that does not present tonality variation. With high demand in the north of Spain, its klinker quality gives excellent performance to harsh climates. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Very characteristic from the British Islands, Red Inglés presents different tones of red which randomly placed, shapes an excellent aesthetic. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Red Granada is characterised by its red variety of tones. This unique way of shaping façades, adds aesthetic value in conjuction with a clear mortar joint. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Blue Cobalto Glazed Brick gives light and vitality to the façade. It stands for its characteristic blue bright resistance to time. La Paloma Cerámicas combines a long backgroud manufacturing facing glazed bricks using the latest technology in order to reach high quality finishes. Glazed bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

White Pirineo Matt is the white matt alternative for those projects that look for avoid glossy elements that could distort the original chromatic appearance reqired. It presents a pure white, giving to façades the advantages inherent to this color. La Paloma Cerámicas combines a long backgroud manufacturing facing bricks using the latest technology in order to reach high quality finishes. Pirineo bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

White Pirineo Glazed sets the white difference in façades due to its versatility and adaptability to the environment. A set of brights makes the building an "artistic expression". La Paloma Cerámicas combines a long backgroud manufacturing facing bricks using the latest technology in order to reach high quality finishes. Pirineo bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Black Arrecife gives a clean appearance that stands for its homogeneity. La Paloma Cerámicas combines a long backgroud manufacturing facing bricks using the latest technology in order to reach high quality finishes. Arrecife bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Grey Glazed has a bright finish grey texture. Withing the most demanded models, current architectonic trends look for neutral colors and this grey is presented as an affordable option. La Paloma Cerámicas combines a long backgroud manufacturing facing glazed bricks using the latest technology in order to reach high quality finishes. Glazed bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Green Glazed stands for the intensity of its green bright color. It is especially suitable for residential areas. La Paloma Cerámicas combines a long backgroud manufacturing facing glazed bricks using the latest technology in order to reach high quality finishes. Glazed bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

INSULATION PANEL + BRICK SLIPS. La Paloma Cerámicas develops TermoKlinker; a cobined insulation system of extruded polyestyrene + ceramic brick slips, designed for exterior and interior façade restoration or new buildings. The range of Brick Slips that forms TermoKlinker system is the same as that of Facing Bricks (same texture and color). TermoKlinker is designed and installed in accordance with the European Technical Approval of "Veture kits - Prefabricated units for external wall insulation" (Not ETICS) ETAG 017. The prefabricated veture units panels are made of an insulation material (XPS) bonded in factory to an external discontinuous skin of ceramic slips, with a grouting mortar applied on-site. The panels are fixed with mechanical fixinga and ancillary items. They will be sealed with a sealant and grouted with a grouting cement-based mortar. Acoustic and thermal efficiency of a building, starts in the façade, it is one of the main points to consider, it is the area in which more heat or cold transmission occurs and the main barrier against external noise. There is no doubt that we should avoid thermal bridge effect as far as possible. In this respect, houses also benefit from the high efficiency thermal envelope of a building with TermoKlinker.

INSULATION PANEL + BRICK SLIPS. La Paloma Cerámicas develops TermoKlinker; a cobined insulation system of extruded polyestyrene + ceramic brick slips, designed for exterior and interior façade restoration or new buildings. The range of Brick Slips that forms TermoKlinker system is the same as that of Facing Bricks (same texture and color). TermoKlinker is designed and installed in accordance with the European Technical Approval of "Veture kits - Prefabricated units for external wall insulation" (Not ETICS) ETAG 017. The prefabricated veture units panels are made of an insulation material (XPS) bonded in factory to an external discontinuous skin of ceramic slips, with a grouting mortar applied on-site. The panels are fixed with mechanical fixinga and ancillary items. They will be sealed with a sealant and grouted with a grouting cement-based mortar. Acoustic and thermal efficiency of a building, starts in the façade, it is one of the main points to consider, it is the area in which more heat or cold transmission occurs and the main barrier against external noise. There is no doubt that we should avoid thermal bridge effect as far as possible. In this respect, houses also benefit from the high efficiency thermal envelope of a building with TermoKlinker.

INSULATION PANEL + BRICK SLIPS. La Paloma Cerámicas develops TermoKlinker; a cobined insulation system of extruded polyestyrene + ceramic brick slips, designed for exterior and interior façade restoration or new buildings. The range of Brick Slips that forms TermoKlinker system is the same as that of Facing Bricks (same texture and color). TermoKlinker is designed and installed in accordance with the European Technical Approval of "Veture kits - Prefabricated units for external wall insulation" (Not ETICS) ETAG 017. The prefabricated veture units panels are made of an insulation material (XPS) bonded in factory to an external discontinuous skin of ceramic slips, with a grouting mortar applied on-site. The panels are fixed with mechanical fixinga and ancillary items. They will be sealed with a sealant and grouted with a grouting cement-based mortar. Acoustic and thermal efficiency of a building, starts in the façade, it is one of the main points to consider, it is the area in which more heat or cold transmission occurs and the main barrier against external noise. There is no doubt that we should avoid thermal bridge effect as far as possible. In this respect, houses also benefit from the high efficiency thermal envelope of a building with TermoKlinker.

INSULATION PANEL + BRICK SLIPS. La Paloma Cerámicas develops TermoKlinker; a cobined insulation system of extruded polyestyrene + ceramic brick slips, designed for exterior and interior façade restoration or new buildings. The range of Brick Slips that forms TermoKlinker system is the same as that of Facing Bricks (same texture and color). TermoKlinker is designed and installed in accordance with the European Technical Approval of "Veture kits - Prefabricated units for external wall insulation" (Not ETICS) ETAG 017. The prefabricated veture units panels are made of an insulation material (XPS) bonded in factory to an external discontinuous skin of ceramic slips, with a grouting mortar applied on-site. The panels are fixed with mechanical fixinga and ancillary items. They will be sealed with a sealant and grouted with a grouting cement-based mortar. Acoustic and thermal efficiency of a building, starts in the façade, it is one of the main points to consider, it is the area in which more heat or cold transmission occurs and the main barrier against external noise. There is no doubt that we should avoid thermal bridge effect as far as possible. In this respect, houses also benefit from the high efficiency thermal envelope of a building with TermoKlinker.

"Charisma" is an architectural interior design door with a three-dimensional surface. The pattern on the D100 resembles the texture of a brick wall and the look and feel is different from traditional solutions. With its high finish and environmental friendly construction, it takes modern interior design to a new level. All doors in the Charisma range are available with a number of glasses and also as sliding door solutions.

"Charisma" is an architectural interior design door with a three-dimensional surface. The pattern on the D100 resembles the texture of a brick wall and the look and feel is different from traditional solutions. With its high finish and environmental friendly construction, it takes modern interior design to a new level. All doors in the Charisma range are available with a number of glasses and also as sliding door solutions.

"Charisma" is an architectural interior design door with a three-dimensional surface. The pattern on the D100 resembles the texture of a brick wall and the look and feel is different from traditional solutions. With its high finish and environmental friendly construction, it takes modern interior design to a new level. All doors in the Charisma range are available with a number of glasses and also as sliding door solutions.

"Charisma" is an architectural interior design door with a three-dimensional surface. The pattern on the D100 resembles the texture of a brick wall and the look and feel is different from traditional solutions. With its high finish and environmental friendly construction, it takes modern interior design to a new level. All doors in the Charisma range are available with a number of glasses and also as sliding door solutions.

"Charisma" is an architectural interior design door with a three-dimensional surface. The pattern on the D100 resembles the texture of a brick wall and the look and feel is different from traditional solutions. With its high finish and environmental friendly construction, it takes modern interior design to a new level. All doors in the Charisma range are available with a number of glasses and also as sliding door solutions.

"Charisma" is an architectural interior design door with a three-dimensional surface. The pattern on the D100 resembles the texture of a brick wall and the look and feel is different from traditional solutions. With its high finish and environmental friendly construction, it takes modern interior design to a new level. All doors in the Charisma range are available with a number of glasses and also as sliding door solutions.

Structural brick with hydraulic glued installation. Masonry thickness 20 cm, Insulating type a

Calibric structural brick accessories with vertical perforations for 20 cm common masonry

Calibric structural brick accessories with vertical perforations for 20 cm common masonry

Calibric structural brick accessories with vertical perforations for 20 cm common masonry

Calibric structural brick accessories with vertical perforations for 20 cm common masonry

Structural brick with hydraulic glued installation. Masonry thickness 20 cm, Insulating type a

Monolitic clay brick accessory

Monolitic clay brick accessory

Monolitic clay brick accessory

Monolitic clay brick accessory

Specific clay brick accessory used to reduce thermical bridge located on the wall/floor junction

Specific clay brick accessory used to reduce thermical bridge located on the wall/floor junction

The Silka block is suitable for load-bearing and non-load-bearing interior walls as well as for the inner shell of external walls. Thanks to the equipment with a reciprocating groove and spring system, processing is quick and easy. Grip pockets ensure ergonomic work. The processing is carried out with the Silka thin bed mortar. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - maximum sound insulation at high bulk densities - optimal summer warmth protection - optimized grips - also available as a perforated brick with a low bulk density

The Silka block is suitable for load-bearing and non-load-bearing interior walls as well as for the inner shell of external walls. Thanks to the equipment with a reciprocating groove and spring system, processing is quick and easy. Grip pockets ensure ergonomic work. The processing is carried out with the Ytong thin bed mortar. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - maximum sound insulation at high bulk densities - optimal summer warmth protection - optimized grips - also available as a perforated brick with a low bulk density

BASE CREMA composition ARENAL crema: 50% ARENAL sabbia: 10% ARENAL grigio chiaro: 10% SANTIAGO grigio terra: 20% TEIDE bianco: 3% ANTICO MATTONE rosato: 3% ANTICO MATTONE giallo: 4% BASE SABBIA composition ARENAL sabbia: 70% ARENAL marrone chiaro: 10% ARENAL grigio terra: 10% ANTICO MATTONE rosato: 10% The ancient building tradition which developed from the use of materials that were easy to find and continuously adaptated and restructurated by the needs of time, is harmonious and enchanting. The Misto Umbro collection brings these lovely building elements – irregular stone and brick - back into use. The colouring of the base element, Arenal sabbia, is identical to the field sandstone that was widely used in the Umbrian countryside. The Pietre d'Arredo finishing elements are made using special binding materials, natural lightweight aggregate, alongside colouring pigments that are highly resistant to UV rays and additives, which render the product incredibly resistant to atmospheric agents. WHY CHOOSE PIETRE D’ARREDO? The innovative manufacturing technique allows for minimum waste and the accurate definition of surfaces makes it a perfect substitute for natural stone, limiting extraction from the quarry, thus respecting and protecting the environment. It protects the building enclosure from weather conditions and fortifies thermal insulation systems, thus improving living comfort. It facilitates application because of its light weight. USES Identical, aesthetically speaking, to their natural counterparts, the Pietre d'Arredo finishing elements can be used for new projects as well as in the re-qualification of older buildings being restructured. As a result of their versatility, they can be used to clad both internal and external walls, retaining walls, columns, fireplaces, wainscoting, etc.

Thermoreal®-Gebrik® is a 1m², 60mm thick panel made of clay bricks elements bonded to insulating polyurethane foam. It is fixed to the concrete, masonry or wood frame by mechanical fasteners and may be completed with additional insulation - up to 220mm thick – to reach a high thermal resistance, depending the insulated material chosen. With its wide range of colours, in smooth or sanded finish, it allows give the aesthetics of an authentic wall brick and taking the advantage of an efficient and economical system of external thermal insulation.

Single leaf glazed fire-resistant doors EI60 to EI90 with WIDE FRAME PUERTAS GISMERO glazed doors are the definitive example of elegance and reliability against the fire with its two profile options designed specifically by PUERTAS GISMERO, a narrow frame of 99 mm and a wide frame of 150 mm. Like other types of doors PUERTAS GISMERO offers different options of frames and pre-frames depending on the type of project they are used to: new buildings or rehabilitation, to brick wall or light partitions and they allow a total freedom to choose the hardware, accessories, finishes and colours being customizable according to the customer's request and the functional requirements of the building. FREE DIMENSIONS AND DESIGN.

Single leaf glazed fire-resistant doors EI60 to EI90 with NARROW FRAME PUERTAS GISMERO glazed doors are the definitive example of elegance and reliability against the fire with its two profile options designed specifically by PUERTAS GISMERO, a narrow frame of 99 mm and a wide frame of 150 mm. Like other types of doors PUERTAS GISMERO offers different options of frames and pre-frames depending on the type of project they are used to: new buildings or rehabilitation, to brick wall or light partitions and they allow a total freedom to choose the hardware, accessories, finishes and colours being customizable according to the customer's request and the functional requirements of the building. FREE DIMENSIONS AND DESIGN.

Single leaf glazed fire-resistant doors EI60 to EI90 with WIDE FRAME PUERTAS GISMERO glazed doors are the definitive example of elegance and reliability against the fire with its two profile options designed specifically by PUERTAS GISMERO, a narrow frame of 99 mm and a wide frame of 150 mm. Like other types of doors PUERTAS GISMERO offers different options of frames and pre-frames depending on the type of project they are used to: new buildings or rehabilitation, to brick wall or light partitions and they allow a total freedom to choose the hardware, accessories, finishes and colours being customizable according to the customer's request and the functional requirements of the building. FREE DIMENSIONS AND DESIGN.

Single leaf glazed fire-resistant doors EI60 to EI90 with NARROW FRAME PUERTAS GISMERO glazed doors are the definitive example of elegance and reliability against the fire with its two profile options designed specifically by PUERTAS GISMERO, a narrow frame of 99 mm and a wide frame of 150 mm. Like other types of doors PUERTAS GISMERO offers different options of frames and pre-frames depending on the type of project they are used to: new buildings or rehabilitation, to brick wall or light partitions and they allow a total freedom to choose the hardware, accessories, finishes and colours being customizable according to the customer's request and the functional requirements of the building. FREE DIMENSIONS AND DESIGN.

<p>The pure and simple lines of the geometrical shape par excellence — the circle — whose harmony come together with light to enhance spaces and situations: Basic Round is a totally disappearing recessed luminaire made of Coral®, installable on plasterboard or brick ceilings with a unique and minimal design, perfect for illuminating spaces in a discreet and elegant way. Designed for the indoor, it can be only provided with LED luminescent sources positioned 20 mm backwards from the ceiling level. Basic Round suits any architectonic projects, spontaneously emphasizing the surfaces it is installed on.</p> <p>Coral® body<br>IP20 protection grade<br>90° light beam inclination<br>Light emission hole Ø 50<br>Dimensions 140 x 140 x 70 mm / 140 x 140 x 80 mm<br>Lamp<br>dicroic QR CB 51 (LED version)<br>QPAR 16 (LED version)<br>LED COB professional<br>LED colour temperature: 3000K (2700 K - 4000 K on request)<br>On request: LED dimmable PUSH or DALI</p>

<p>A bright product starting from its shape, discreet and elegant, able to perfectly integrate itself inside architectures achieving extraordinary complete disappearance effects. Genius guarantees a perfect lighting in every environment is may be installed in: totally disappearing recessed luminaire for indoor spaces, made of AirCoral® and installable on plasterboard or brick ceilings, is able to emit an incredible light intensity for just a 20 mm emission hole, so tiny that it disappears when the product is turned off.</p> <p>With a simple hand gesture, the electric part can be extracted directly from the hole which allows the light to pour out. This is possible thanks to the push-pull mechanism, which makes the eventual extraction and replacement of the LED source easier in case of maintenance.</p> <p>AirCoral® body<br>IP20 protection grade<br>90° light beam inclination<br>Light emission hole Ø 20<br>Dimensions 125 x 100 x 110 mm<br>LED lamp COB professional<br>LED colour temperature: 3000K</p><p></p>

A light beam that breaks darkness, establishing a new balance inside the living space. Light and shadows alternate, playing with furniture, creating atmospheres with a unique and delicate charm: Nefi, a totally disappearing indoor recessed luminaire made of AirCoral®, installable on plasterboard or brick ceilings, is equipped with a satined glass, creating an armonious diffusion of light. Design and technology, geometry and elegance to flood the space with bright light. AirCoral® body IP40 protection grade 90° light beam inclination Light emission hole 90 x 90 mm Body dimensions 145 x 145 x 120 mm / 145 x 145 x 140 mm / 145 x 145 x 160 mm Light source QR CB 51 dichroic (both halogen and LED) QPAR 16 (both halogen and LED) Professional COB LED LED colour temperature: 3000K (2700K - 4000K available upon request) Push/Dali dimmable LED available upon request

A recessed indoor system made of AirCoral® for plasterboard or brick ceilings designed to become an integral part of the ceiling, Nimbus is completely disappearing from the view once installed. Its satined glass diffuses light in the environment, enhancing the spaces, transforming them in a sight to rediscover every time, defining precise light paths with a distinctive style that speaks the language of design. AirCoral® body IP40 protection grade 90° / adjustable (+- 30°) light beam inclination Dimensions 235 x 235 x 160 mm / 235 x 235 x 200 mm Light emission hole 175x175 mm Light source QR 111 halogen QT-DE 12 halogen TC-TEL fluorescent LED (COB or SMD) LED colour temperature: 3000K

Unleaf is a total recessed luminaire made of AirCoral® and installable on plasterboard or brick walls and ceilings. A perfect cut on the wall, it shapes spaces and architectonic projects with an original luminescent touch. The product surface sinks into the wall, modelling it through light. An underlying, embellishing beam for a lamp of peculiar design and unique elegance; characteristics reflected in the suggestive atmosphere recreated in the environment by the luminaire. AirCoral® body IP20 protection grade Dimensions 450 x 450 x 95 mm LED light source LED colour temperature: 3000 K (on demand 2700 K - 4000 K)

<p><b>Greenguard Gold Certified, BASF Neopor® GPS</b> is a graphite polystyrene (GPS) rigid foam insulation that gives maximum efficiency, cost-effectiveness and sustainability on construction projects. It's unique silver-gray color and exceptional insulation characteristics are a result of high-purity graphite that reflects and absorbs radiant energy, decreasing the materials thermal conductivity and increasing its R-value.<br></p><p>This object delivers both stand-alone Neopor® insulation as well as two NFPA 285 Wall Assemblies containing Neopor® as the exterior insulation.  One option with brick cladding and the other with stucco.  Additional cladding and material options can be viewed in our NFPA 285 Technical Bulletin.</p>