Length and Width parameters are not used Diameter and height : 300 & 330 mm

Length and Width parameters are not used The size is (width X height): 300 X 300 mm

Length and Width parameters are not used The size is (width X height): 600 X 300 mm

Length and Width parameters are not used The size is (width X height): 600 X 300 mm

Length and Width parameters are not used The size is (width X height): 400 X 300 mm

Length and Width parameters are not used The size is : 2000 X 1089 X 1925 mm Base Diameter and Height : 2000 & 300 mm

Length and Width parameters are not used The size is (thickness X width X height): 100 X 600 X 300 mm

Family name ZEN Wall/Ceiling mounted lighting fixture

Wall Lighting Fixture 300 X 300 MM

Softub Resort 300+ má o 20 cm větší průměr, než model Legend, je o 8cm vyšší, což umožňuje větší počet osob bez rozlití vody nebo "živější" využití vířivky. Model Resort 300+ má navíc na dně půlkruhový vyvýšený schod, který využijí především děti, pro které by mohl být největší model při plném obsazení hluboký. Samozřejmostí je barevné osvětlení a vyšší počet trysek oproti menším modelům. Vířivka Softub Resort 300+ pojme pohodlně 5­ 6 osob a je právem vlajkovou lodí celé nabídky vířivek Softub.

Adjustable Self-Leveling Floor Support Eterno SE. The Adjustable Self-Leveling Floor Support Eterno SE11 has an adjustable height that goes from 300 mm to 400 mm. Self-leveling Head in bi-material: Polypropylene (PP) and rubber. Features: - Self-levelling head that automatically justifies slopes to 5% - Adjustable height from 300 to 400 mm once pavement is finished thanks to exclusive regulation key - 320 cm2 smooth base support - Entirely recyclable - Resistant to temperatures between -40° to 120°C - Resistant to acids and ultraviolet deterioration - Suitable to any self-supporting outdoor paving system - Protected by international patent - Head with upper part of soft non-slip and anti-noise rubber - Tabs easy to remove

Towel rail (Can be installed with screws or adhesive)

Grilled container (Can be installed with screws or adhesive)

Extraslim metallic shower head for ceiling or wall installation. Support kit / arm not included.

Towel rail

Grilled container (Can be installed with screws or adhesive)

Open shelf element, Body – lacquered surface veneer with solid wood edges With hidden wall fixation 1 fixed shelf

Open shelf element, Body – lacquered surface veneer with solid wood edges With hidden wall fixation 1 fixed shelf

RH Logic 300 comes as standard with castors for soft floors and base in aluminium, but can also be enhanced with a range of options such as neckrest and armrests. RH Logic 300 is also available with an XL seat.

Grip.

Multipor flat roof insulation DAA In the thermal insulation of flat roofs, the insulation materials used must meet high standards. Multipor is a highly pressure-resistant, compression-free mineral insulation and ideally suited for flat roof insulation. They are particularly suitable for trafficable areas and flat roof constructions with high fire protection or environmental claims. Strong benefits The non-flammable, fully mineral Multipor flat roof insulation DAA belongs to building material class A1- incombustible. In the case of a fire no toxic fumes and smoke. The mineral raw materials in case of fire even inhibit the spread of flames. • Suitable for the insulation of flat roofs in cold and warm roof constructions • Varitey of roof constructions of the unloaded, unused roof until the highly compressed park roof structure or roof terraces • Maximum stability and compressive strength of 300 kPa • building practice upsetting free • Best fire protection - incombustible • Officially approved • Tested with all common sealing systems • Ageing, shape and volume resistance • Purely mineral, fiber and free of pollutants • Easy and safe to handle For proper planning of flat roofs with a slope please contact the Multipor Experts from the beginning, to find the right structures for your needs. The system solution presented here is structured by way of example for a first planning. The suitability and specification must be made in each case in consultation with the involved planners.

Silka XL Plus - factory cut to fit Silka XL Plus is the all-inclusive package for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. Silka XL Plus is factory cut to fit and supplied as a complete kit including optimized object-specific installation plans just-in-time to the construction site. The tailor-made delivery replaces the cutting on the site. The noise of the saws and the sawing waste remain in business. Silka XL Plus is used where the highest level of planning and execution security is required. Advantages Property-related wall kit - sawmill waste and –noise remain in factory Laying plan creation and delivery of required components occur "Just in Time" Plus = planning, logistics and service Optional vertical joint grouting for highest quality masonry with Silka Secure thin-bed mortar Processing with Mini-Crane reduces physical strain Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 Optimal heat protection in summer Level wall surfaces allow the use of thin-layer plasters and direct tiling on the wall As a full stone an ideal mounting base

Silka XL Plus - factory cut to fit Silka XL Plus is the all-inclusive package for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. Silka XL Plus is factory cut to fit and supplied as a complete kit including optimized object-specific installation plans just-in-time to the construction site. The tailor-made delivery replaces the cutting on the site. The noise of the saws and the sawing waste remain in business. Silka XL Plus is used where the highest level of planning and execution security is required. Advantages Property-related wall kit - sawmill waste and –noise remain in factory Laying plan creation and delivery of required components occur "Just in Time" Plus = planning, logistics and service Optional vertical joint grouting for highest quality masonry with Silka Secure thin-bed mortar Processing with Mini-Crane reduces physical strain Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 Optimal heat protection in summer Level wall surfaces allow the use of thin-layer plasters and direct tiling on the wall As a full stone an ideal mounting base

Silka XL Plus - factory cut to fit Silka XL Plus is the all-inclusive package for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. Silka XL Plus is factory cut to fit and supplied as a complete kit including optimized object-specific installation plans just-in-time to the construction site. The tailor-made delivery replaces the cutting on the site. The noise of the saws and the sawing waste remain in business. Silka XL Plus is used where the highest level of planning and execution security is required. Advantages Property-related wall kit - sawmill waste and –noise remain in factory Laying plan creation and delivery of required components occur "Just in Time" Plus = planning, logistics and service Optional vertical joint grouting for highest quality masonry with Silka Secure thin-bed mortar Processing with Mini-Crane reduces physical strain Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 Optimal heat protection in summer Level wall surfaces allow the use of thin-layer plasters and direct tiling on the wall As a full stone an ideal mounting base

Silka XL Plus - factory cut to fit Silka XL Plus is the all-inclusive package for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. Silka XL Plus is factory cut to fit and supplied as a complete kit including optimized object-specific installation plans just-in-time to the construction site. The tailor-made delivery replaces the cutting on the site. The noise of the saws and the sawing waste remain in business. Silka XL Plus is used where the highest level of planning and execution security is required. Advantages Property-related wall kit - sawmill waste and –noise remain in factory Laying plan creation and delivery of required components occur "Just in Time" Plus = planning, logistics and service Optional vertical joint grouting for highest quality masonry with Silka Secure thin-bed mortar Processing with Mini-Crane reduces physical strain Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 Optimal heat protection in summer Level wall surfaces allow the use of thin-layer plasters and direct tiling on the wall As a full stone an ideal mounting base

ShowerTablet Select 300 thermostatic bath mixer for exposed installation

ShowerTablet Select 300 thermostatic shower mixer for exposed installation

Talis Select S single lever kitchen mixer 300

Talis Select S single lever kitchen mixer 300

Connect Space-Mobile a colonna Connect Space 300x1750x210 mm

Work top

Work top

Raindance E 300 Air 1jet overhead shower with shower arm 390 mm

Raindance E 300 Air 1jet overhead shower with shower arm 390 mm EcoSmart 9 l/min

Raindance E 300 Air 1jet overhead shower with ceiling connector 100 mm

Raindance E 300 Air 1jet overhead shower with ceiling connector 100 mm EcoSmart 9 l/min

Raindance E 300 1jet Showerpipe 350 ST

Raindance E 300 1jet Showerpipe 350 ST EcoSmart 9 l/min

Raindance E 300 1jet Showerpipe 600 ST

Raindance E 300 1jet Showerpipe 600 ST EcoSmart 9 l/min

AXOR Ceiling connector 300 mm

AXOR Ceiling connector 300 mm

AXOR Ceiling connector 300 mm

Connect Space-Top in vetro Connect Space 300 mm

Dea-Mobiletto laterale Dea 300x280x300 mm

Dea-Mobiletto laterale Dea 300x280x300 mm

verge lh 300

AXOR Curved pipe 300 mm

AXOR straight pipe 300 mm

Raindance Select E 300 2jet overhead shower with shower arm 390 mm

Raindance S 300 Air 1jet overhead shower with ceiling connector 100 mm

Talis Select S Single lever kitchen mixer 300

Talis Select S Single lever kitchen mixer 300 with pull-out spout

M5115-H300 single lever kitchen mixer 300 with pull-out spout

M5115-H300 single lever kitchen mixer 300 with pull-out spout

M512-H300 single lever kitchen mixer 300

M512-H300 single lever kitchen mixer 300

For measuring of consumption of greater amounts of cold water with a temperature up to 30 °C or 50 °C on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).

For measuring of consumption of greater amounts of cold water with a temperature up to 30 °C or 50 °C on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).

For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).

For measuring of consumption of greater amounts of hot water with a temperature up to 130 °C, on the maximum working pressure up to 16 bar (PN16). Suitable for installation in the horizontal hoses (pipelines) with the counter directed upwards (H), in vertical or horizontal hoses with the counter directed sidewards (V) or in diagonal hoses (H/V). MWN water meters in standard version are equipped with six-barrel counter (IP65, IP68 – optional) and painted cast-iron housing. Water meters are adapted to operation in the systems of remote data transfer (AMR).

<p>The PC-300 is a professional grade, rack-mountable power conditioner and controller designed to provide 120 Volt AC power distribution, switching, surge protection, noise filtering, and energy monitoring for Crestron® control systems, AV systems, computers, and other equipment. Eight individually-switched outlets are provided on the rear panel, plus a single unswitched convenience outlet is provided on the front. All nine outlets are protected, filtered, and monitored. The switched outlets are each turn-on delay-adjustable when controlled from the front panel power switch. The switched outlets are also individually controllable via a control system to enable independent switching of devices, on/off power sequencing, load-shedding, and other custom power control functionality.[1]</p><p>Built-in RMS voltage and current monitoring enables logging and reporting of line voltage fluctuations at the input, as well as current, power, and energy usage at each outlet. An external temperature sensor is included to keep tabs on heat conditions within the equipment rack or room. Network connectivity allows for setup and operation using a web browser, with extensive custom control and monitoring capabilities enabled through integration with a Crestron control system, the MyCrestron.com residential monitoring service, the Crestron Fusion® Cloud enterprise management service, or an SNMP client.[1,2] Setup and operation can also be performed through the LCD front panel.</p><p> </p><strong>Power Conditioning<br></strong>A quality power conditioner is an essential component of any professional system to prevent sudden equipment failure due to lightning and electrical disturbances, to prolong the lifespan of that equipment, and to maximize overall system performance during everyday operation. The PC-300 includes the following power conditioning features:<br><ul><li><strong>Surge Protection</strong> — Provides protection against surges and spikes in the AC power line caused by lightning and other electrical disturbances</li><li><strong>Under/Over Voltage Cutoff</strong> — Shuts off power to the rear panel outlets if the line voltage strays beyond the normal operating range, which is adjustable on the PC-300</li><li><strong>Thermal Breaker</strong> — Disrupts power to all outlets in case of an overload condition</li><li><strong>EMI/RFI Noise Filtering</strong> — Prevents electromagnetic and radio frequency interference that can negatively impact sound and video quality</li><li><strong>Wiring Fault Detection</strong> — Detects faulty wiring of the incoming AC power line and shuts off power to the rear panel outlets until the fault is corrected [3]</li></ul> <p><strong>Eight-Stage Adjustable Turn-On Delay</strong><br>When operated by its front panel power switch, the PC-300 allows each of its rear panel outlets to turn on in any order according to the delay time set for each outlet. Each outlet is individually adjustable to provide up to 10 seconds of delay before turning on, ensuring that the connected equipment gets powered up in proper order with sufficient time for each piece to stabilize. This helps to prevent dangerous transients that can damage delicate components and potentially trip the main circuit breaker. It can also help to prevent audible pops and thumps through connected audio equipment at power-up. Delayed turn-on is initiated by turning on the front panel power switch, or by applying power to the main line input following a power outage or through an externally switched circuit.<br><br></p><p><strong>Eight Remote-Controllable Switched Outlets</strong><br>Any of the PC-300’s eight rear panel outlets can be turned on or off individually through the front panel LCD screen or over the network using a web browser or control system. This energy-saving feature allows select components to be powered down when not needed. Through integration with a control system, custom functionality can be programmed to enable control from a touch screen, keypad, remote, or mobile device. Sequential power-up and power-down functionality can be enabled through programming of the control system, with select outlets designated as always on. For systems employing a backup generator or UPS, load-shedding can be performed to shut down unnecessary components during a power outage.[1]</p><p> </p><strong>Energy Monitoring</strong><br>By sensing the incoming line voltage and individual device loads, the PC-300 facilitates a host of solutions for monitoring, automating, and troubleshooting a system.<br><ul><li>Voltage monitoring allows fluctuations in the power line to be tracked and logged, helping to identify and document problems with the power utility or building wiring.</li><li>Energy monitoring per outlet provides the real power consumption (watts), current draw (amps), and energy usage (watt-hours) for each connected device.</li><li>Allows power-hungry equipment to be identified and replaced with more efficient equipment.</li><li>High inrush current devices can be identified to assist in optimizing the configuration of power sequencing schemes.</li><li>Overall energy usage can be tracked and logged to identify trends and reform energy-wasting behaviors.</li><li>Individual device usage can be tracked to inform the scheduling of maintenance and future purchasing decisions.</li><li>The power state of an IR controlled device can often be determined by sensing its AC current draw, ensuring it’s on when it should be on.</li><li>An alert notification can be sent if there’s a sudden or abnormal drop in current draw, potentially indicating a device has been shut off improperly or disconnected due to theft (effective only when outlets are switched on).</li></ul><p> </p><p><strong>Ambient Temperature Sensing</strong><br>The PC-300 offers a complete equipment protection solution by monitoring the ambient temperature within the equipment cabinet or room to prevent overheating. The included temperature sensor connects to the rear of the PC-300 and features a choice of magnetic or adhesive mounting for easy placement within a typical equipment rack enclosure. The over-temperature cutoff threshold can be set to shut down power to the system if conditions exceed a safe operating temperature. Through a control system, the temperature measurement can be utilized to regulate the operation of cooling fans or air-conditioning equipment to keep equipment running cool.</p> <p><strong>Ping Monitoring</strong><br>No matter how well a system is designed and programmed, even the finest control system or computer has the potential to lock up and stop responding once in a while. The PC-300 can be configured to detect an unresponsive device by sending it a ping command at regular intervals. If the ping request is not returned after four tries, the outlet feeding the monitored device cycles off and on to reboot the device, quickly restoring normal operation without any human intervention.</p> <p><strong>Built-In Logging</strong><br>Events such as power surges, over/under voltage conditions, over-temperature conditions, ping failures, outlet switching activity, and sudden changes in current draw (indicative of a device being improperly shut off or disconnected) can all be logged as they occur to document the time and cause of problems and to track device usage. All sensor readings are logged at a configurable interval as short as five seconds providing a minimum of one week’s worth of data. Logs can be retrieved periodically to record a detailed history of events and energy usage over time.</p> <strong>UL® 1449 Certified</strong><br>The PC-300 has been tested and certified by UL as compliant with the UL 1449 safety and performance standard for surge protective devices (SPD).<br>  <br><strong>Key Features</strong><br><ul><li>Rack-mountable power conditioner and controller</li><li>Eight individual-switched rear panel outlets</li><li>Adjustable turn-on delay and local/remote switching per outlet</li><li>One unswitched front panel outlet</li><li>Built-in current sensing and energy monitoring per outlet</li><li>Line voltage monitoring</li><li>Professional grade surge protection</li><li>UL® 1449 Type 3 Listed</li><li>Thermal breaker overload protection</li><li>Adjustable over-voltage and under-voltage cutoff</li><li>EMI and RFI noise filtering</li><li>Wiring fault detection [3]</li><li>Ambient temperature sensing and over-temperature cutoff</li><li>Ping monitoring (device lockup detection and reboot)</li><li>Built-in energy usage and event logging</li><li>Front panel main power switch, status indicators, and color LCD</li><li>Easy setup and operation via front panel or web browser</li><li>Crestron® control system integration via Ethernet or Cresnet®</li><li>Remote management via MyCrestron.com, Crestron Fusion® Cloud, or SNMP [2]</li><li>Single-space 19 inch rack-mountable</li><li>Rated 15 Amps at 120 Volts AC</li><li>Limited Lifetime Product Warranty</li><li>Limited 5 Year Connected Equipment Protection Warranty</li></ul> <p>1. Crestron control system and custom programming sold separately.<br>2. Email notification and direct integration with MyCrestron.com, Crestron Fusion, and SNMP will be enabled through a future firmware update. Alternately, these services can be integrated now through a Crestron control system with custom programming.<br>3. Detects most input line wiring faults. Does not detect neutral/ground reversal. Does not discern between ground connections at the AC power line, chassis, or connected equipment (a ground connection at any point will be detected by the PC-300 as normal). The installer is responsible for proper wiring and grounding of this and all connected equipment according to applicable electrical codes, accepted guidelines, and best practices. Proper wiring and function of the AC power source should be verified prior to connecting the PC-300 or any other equipment. Use of this product does not negate the responsibilities of the installer and end-user to exercise all appropriate and required measures for safe and reliable installation and operation.</p>

Towel rail. An alliance between simplicity, style and functionality. This collection has been designed to adapt to any space and requirement. Inspired by minimalist forms, it is characterised by its great versatility. It is a solution thought of for both small and large design projects, whether public or private.

Длина дорожки 6,25 м Начало препятствия 200 – 300 см от начала дорожки Ширина препятствия 15 – 22 см Примечание: Разрешенный путь движения мяча, только через препятствие, если мяч вылетает во время движения из петли, препятствие считается не пройдено и следующий удар наносится снова с зоны Ти. http://golfstroy.ru/modulnii-mini-golf/ofisnyj-modulnyj-mini-golf/8-modul-golf

Длина дорожки 6,25 м Начало препятствия 200 – 300 см от начала дорожки Ширина препятствия 15 – 22 см Примечание: Разрешенный путь движения мяча, только через препятствие, если мяч вылетает во время движения из петли, препятствие считается не пройдено и следующий удар наносится снова с зоны Ти. http://golfstroy.ru/modulnii-mini-golf/ofisnyj-modulnyj-mini-golf/8-modul-golf

Длина дорожки 6,25 м Начало препятствия 200 – 300 см от начала дорожки Ширина препятствия 15 – 22 см Примечание: Разрешенный путь движения мяча, только через препятствие, если мяч вылетает во время движения из петли, препятствие считается не пройдено и следующий удар наносится снова с зоны Ти. http://golfstroy.ru/modulnii-mini-golf/ofisnyj-modulnyj-mini-golf/8-modul-golf

Длина дорожки 6,25 м Начало препятствия 200 – 300 см от начала дорожки Ширина препятствия 15 – 22 см Примечание: Разрешенный путь движения мяча, только через препятствие, если мяч вылетает во время движения из петли, препятствие считается не пройдено и следующий удар наносится снова с зоны Ти. http://golfstroy.ru/modulnii-mini-golf/ofisnyj-modulnyj-mini-golf/8-modul-golf

Table 120 x 300

[LIST] Highly thermally insulated sliding and lift-and-slide system Uw values of < 1.3 W/(m²K), depending on the design Excellent drainage system with watertightness up to 1,050 Pa Sliding and lift-and-slide systems with optimised thermal insulation Vent weight up to 300 kg, available for up to 400 kg special design High-quality fi ttings components for easy operation High degree of transparency due to large vent sizes of up to 9 m², depending on the design [/LIST]

Paper baskets made of stainless steel mesh, foldable, supplied with plastic bags and set up. Paper Baskets: Stainless Steel Paper Basket 20l: 752000 Format: 300 x 360 x 180 mm Weight: 0.9 Kg Stainless Steel Paper Basket 60l: 750000 Format: 410 x 620 x 250 mm Weight: 2.611 Kg Waste bags: various waste bags in different sizes and colours

Stainless Steel Hygiene Box in 6 l and 12l versions. Made of stainless steel, visible surfaces matt brushed. Optional mount on front for hygiene bags. Opening flap, steel wire holder for bin bags. Box made of matt brushed stainless steel 1.4301, brushed satin finish protects against fingerprints. Rounded edges ensure no risk of injury. Comes complete with fastening materials, delivery and installation. Hygiene Boxes: Stainless Steel Hygiene Box 6l: 7754000 Format: 240 × 225 × 125 mm Weight: 1.96 Kg Stainless Steel Hygiene Box 12l: 7753000 Format 300 × 280 × 125 mm Weight: 3.22 Kg Waste bags: various waste bags in different sizes and colours

Paper Bins Paradise Stainless Steel Paper Bin in 25, 40 l, and 60 l. Made of stainless steel, visible surfaces matt brushed, optionally available with automatically closing lid or opening frame and wall mount. Mount for bin bag is preinstalled. Box made of matt brushed stainless steel 1.4301, brushed satin finish protects against fingerprints. Rounded edges ensure no risk of injury. Comes complete with fastening materials, delivery and installation. Paper Bins: Stainless Steel Paper Bin 25l: 7752000, Weight: 4.19 Kg Stainless Steel Paper Bin 25l Lid: 307752000, Weight: 0.9 Kg Stainless Steel Paper Bin 25l Coverage: 307752100, Weight: 0.9 Kg Format: 450 × 300 × 200 mm Stainless Steel Paper Bin 40l: 7751000, Weight: 6.0 Kg Stainless Steel Paper Bin 40l Lid: 307751000, Weight: 0.9 Kg Stainless Steel Paper Bin 40l Coverage: 307751100, Weight: 0.9 Kg Format: 550 × 335 × 230 mm Stainless Steel Paper Bin 60l: 7750000, Weight: 6.5 Kg Stainless Steel Paper Bin 60l Lid: 307750000, Weight: 0.9 Kg Stainless Steel Paper Bin 60l Coverage: 307750100, Weight: 0.9 Kg Format: 740 × 350 × 250 mm Waste bags: various waste bags in different sizes and colours

[LIST] Floor-Concealed Door Closer The BTS 80 Series of floor-concealed door closers offer adaptability to almost any installation. The closer's compact body permits its use where a larger closer would be prohibitive. Versatility allows installation in thin slab concrete subfloor construction. A wide selection of interchangeable spindles makes the BTS80 suitable for virtually any floor covering or threshold application. Dimensions Length 341 mm, Width 78 mm, Height 60 mm Spring strength (EN) 3/4/6 Max. leaf weight 300 kg Suitable for single and double action doors Floor spring tested to EN 1154 Mechanical backcheck Concealed installation [/LIST]

White steel wire paper baskets. Rilsan-coated (resistant to acids, alkalis, mechanical damage), foldable. Delivery with waste bags and installation. Paper Baskets: CWS Paper Basket 20l: 302000 Format: 300 x 360 x 180 mm Weight: 1.013 Kg CWS Paper Basket 60l: 301000 Format: 410 x 620 x 250 mm Weight: 2.667 Kg Waste bags: various waste bags in different sizes and colours

97% natural raw materials, 72% rapidly renewable, 43% recycled content Marmoleum, Forbo's main linoleum brand, is a natural floor associated with sustainability, durability, high quality and innovative design. Our Marmoleum collection includes solutions for virtually any type of application. Discover the versatile world of Marmoleum with over 300 colours and more than 12 different structures to choose from, available in sheet and modular tile formats.

Person weighing scale with 300 pound capacity. Unit consists of a rugged base frame of 3/32" thick steel with a non-slip surface and a speedometer dial with ultra sensitive registering mechanisms. Scale is designed for medical use.

1 1/4" outlet connector. 300 tube

1 1/4" outlet connector for bidet. 300 tube

Wall-hung vitreous china basin Optional: 337650..0 Khroma Vitreous china full pedestal for basin 337652..0 Khroma Vitreous china semipedestal for basin Compatible with: 505401100 Aqua Click-clack universal waste. Vitreous plug Ø 65 506403110 Totem 1 1/4" outlet connector for basin. 300 Pipe 505400900 Aqua Click-clack universal waste. Chromed plug Ø 40 505400000 Aqua 1 1/4" waste for basin / bidet with overflow and automatic plug 506403810 Minimal 1 1/4" outlet connector. 300 tube 506401614 Aqua 1 1/4" outlet connector for basin. 250 Pipe 505401000 Aqua Click-clack universal waste. Chromed plug Ø 65

1 1/4" outlet connector for basin. 300 Pipe

Runner is a step recessed product to be installed on the riser and perfectly flush to the wall. The two ends wings of the recessing box can be easily shortened to vary the length of the product from 300 to 280 mm. Runner must be installed with its recessing box.

The simple ramp Trait d'Union is a removable ramp recessed in the threshold. Only two ramps are deployed on the sidewalk, which reduces the use of public property. It adapts to every step heights up to 22 cm. The two independent ramps adjust to the slope and pavement. The handling is done by integrated ergonomic push handles. Permitted loads: 300 kg for the standard model.

Coat shelf with partitions. Double storage and 3 hooks per 300 mm. All units are painted with enviromentally friendly powdercoating that is easy to keep clean and extremely durable.

Hat shelf with partitions. 2 hooks per 300 mm. All units are painted with enviromentally friendly powdercoating that is easy to keep clean and extremely durable.

Hat shelf without partitions. 2 hooks per 300 mm. All units are painted with enviromentally friendly powdercoating that is easy to keep clean and extremely durable.

Multipor flat roof insulation DAA In the thermal insulation of flat roofs, the insulation materials used must meet high standards. Multipor is a highly pressure-resistant, compression-free mineral insulation and ideally suited for flat roof insulation. They are particularly suitable for trafficable areas and flat roof constructions with high fire protection or environmental claims. Strong benefits The non-flammable, fully mineral Multipor flat roof insulation DAA belongs to building material class A1- incombustible. In the case of a fire no toxic fumes and smoke. The mineral raw materials in case of fire even inhibit the spread of flames. • Suitable for the insulation of flat roofs in cold and warm roof constructions • Varitey of roof constructions of the unloaded, unused roof until the highly compressed park roof structure or roof terraces • Maximum stability and compressive strength of 300 kPa • building practice upsetting free • Best fire protection - incombustible • Officially approved • Tested with all common sealing systems • Ageing, shape and volume resistance • Purely mineral, fiber and free of pollutants • Easy and safe to handle For proper planning of flat roofs with a slope please contact the Multipor Experts from the beginning, to find the right structures for your needs. The system solution presented here is structured by way of example for a first planning. The suitability and specification must be made in each case in consultation with the involved planners.

Multipor flat roof insulation DAA In the thermal insulation of flat roofs, the insulation materials used must meet high standards. Multipor is a highly pressure-resistant, compression-free mineral insulation and ideally suited for flat roof insulation. They are particularly suitable for trafficable areas and flat roof constructions with high fire protection or environmental claims. Strong benefits The non-flammable, fully mineral Multipor flat roof insulation DAA belongs to building material class A1- incombustible. In the case of a fire no toxic fumes and smoke. The mineral raw materials in case of fire even inhibit the spread of flames. • Suitable for the insulation of flat roofs in cold and warm roof constructions • Varitey of roof constructions of the unloaded, unused roof until the highly compressed park roof structure or roof terraces • Maximum stability and compressive strength of 300 kPa • building practice upsetting free • Best fire protection - incombustible • Officially approved • Tested with all common sealing systems • Ageing, shape and volume resistance • Purely mineral, fiber and free of pollutants • Easy and safe to handle For proper planning of flat roofs with a slope please contact the Multipor Experts from the beginning, to find the right structures for your needs. The system solution presented here is structured by way of example for a first planning. The suitability and specification must be made in each case in consultation with the involved planners.

Multipor flat roof insulation DAA In the thermal insulation of flat roofs, the insulation materials used must meet high standards. Multipor is a highly pressure-resistant, compression-free mineral insulation and ideally suited for flat roof insulation. They are particularly suitable for trafficable areas and flat roof constructions with high fire protection or environmental claims. Strong benefits The non-flammable, fully mineral Multipor flat roof insulation DAA belongs to building material class A1- incombustible. In the case of a fire no toxic fumes and smoke. The mineral raw materials in case of fire even inhibit the spread of flames. • Suitable for the insulation of flat roofs in cold and warm roof constructions • Varitey of roof constructions of the unloaded, unused roof until the highly compressed park roof structure or roof terraces • Maximum stability and compressive strength of 300 kPa • building practice upsetting free • Best fire protection - incombustible • Officially approved • Tested with all common sealing systems • Ageing, shape and volume resistance • Purely mineral, fiber and free of pollutants • Easy and safe to handle For proper planning of flat roofs with a slope please contact the Multipor Experts from the beginning, to find the right structures for your needs. The system solution presented here is structured by way of example for a first planning. The suitability and specification must be made in each case in consultation with the involved planners.

Multipor flat roof insulation DAA In the thermal insulation of flat roofs, the insulation materials used must meet high standards. Multipor is a highly pressure-resistant, compression-free mineral insulation and ideally suited for flat roof insulation. They are particularly suitable for trafficable areas and flat roof constructions with high fire protection or environmental claims. Strong benefits The non-flammable, fully mineral Multipor flat roof insulation DAA belongs to building material class A1- incombustible. In the case of a fire no toxic fumes and smoke. The mineral raw materials in case of fire even inhibit the spread of flames. • Suitable for the insulation of flat roofs in cold and warm roof constructions • Varitey of roof constructions of the unloaded, unused roof until the highly compressed park roof structure or roof terraces • Maximum stability and compressive strength of 300 kPa • building practice upsetting free • Best fire protection - incombustible • Officially approved • Tested with all common sealing systems • Ageing, shape and volume resistance • Purely mineral, fiber and free of pollutants • Easy and safe to handle For proper planning of flat roofs with a slope please contact the Multipor Experts from the beginning, to find the right structures for your needs. The system solution presented here is structured by way of example for a first planning. The suitability and specification must be made in each case in consultation with the involved planners.

Multipor flat roof insulation DAA In the thermal insulation of flat roofs, the insulation materials used must meet high standards. Multipor is a highly pressure-resistant, compression-free mineral insulation and ideally suited for flat roof insulation. They are particularly suitable for trafficable areas and flat roof constructions with high fire protection or environmental claims. Strong benefits The non-flammable, fully mineral Multipor flat roof insulation DAA belongs to building material class A1- incombustible. In the case of a fire no toxic fumes and smoke. The mineral raw materials in case of fire even inhibit the spread of flames. • Suitable for the insulation of flat roofs in cold and warm roof constructions • Varitey of roof constructions of the unloaded, unused roof until the highly compressed park roof structure or roof terraces • Maximum stability and compressive strength of 300 kPa • building practice upsetting free • Best fire protection - incombustible • Officially approved • Tested with all common sealing systems • Ageing, shape and volume resistance • Purely mineral, fiber and free of pollutants • Easy and safe to handle For proper planning of flat roofs with a slope please contact the Multipor Experts from the beginning, to find the right structures for your needs. The system solution presented here is structured by way of example for a first planning. The suitability and specification must be made in each case in consultation with the involved planners.

Multipor flat roof insulation DAA In the thermal insulation of flat roofs, the insulation materials used must meet high standards. Multipor is a highly pressure-resistant, compression-free mineral insulation and ideally suited for flat roof insulation. They are particularly suitable for trafficable areas and flat roof constructions with high fire protection or environmental claims. Strong benefits The non-flammable, fully mineral Multipor flat roof insulation DAA belongs to building material class A1- incombustible. In the case of a fire no toxic fumes and smoke. The mineral raw materials in case of fire even inhibit the spread of flames. • Suitable for the insulation of flat roofs in cold and warm roof constructions • Varitey of roof constructions of the unloaded, unused roof until the highly compressed park roof structure or roof terraces • Maximum stability and compressive strength of 300 kPa • building practice upsetting free • Best fire protection - incombustible • Officially approved • Tested with all common sealing systems • Ageing, shape and volume resistance • Purely mineral, fiber and free of pollutants • Easy and safe to handle For proper planning of flat roofs with a slope please contact the Multipor Experts from the beginning, to find the right structures for your needs. The system solution presented here is structured by way of example for a first planning. The suitability and specification must be made in each case in consultation with the involved planners.

Multipor flat roof insulation DAA In the thermal insulation of flat roofs, the insulation materials used must meet high standards. Multipor is a highly pressure-resistant, compression-free mineral insulation and ideally suited for flat roof insulation. They are particularly suitable for trafficable areas and flat roof constructions with high fire protection or environmental claims. Strong benefits The non-flammable, fully mineral Multipor flat roof insulation DAA belongs to building material class A1- incombustible. In the case of a fire no toxic fumes and smoke. The mineral raw materials in case of fire even inhibit the spread of flames. • Suitable for the insulation of flat roofs in cold and warm roof constructions • Varitey of roof constructions of the unloaded, unused roof until the highly compressed park roof structure or roof terraces • Maximum stability and compressive strength of 300 kPa • building practice upsetting free • Best fire protection - incombustible • Officially approved • Tested with all common sealing systems • Ageing, shape and volume resistance • Purely mineral, fiber and free of pollutants • Easy and safe to handle For proper planning of flat roofs with a slope please contact the Multipor Experts from the beginning, to find the right structures for your needs. The system solution presented here is structured by way of example for a first planning. The suitability and specification must be made in each case in consultation with the involved planners.

Multipor flat roof insulation DAA In the thermal insulation of flat roofs, the insulation materials used must meet high standards. Multipor is a highly pressure-resistant, compression-free mineral insulation and ideally suited for flat roof insulation. They are particularly suitable for trafficable areas and flat roof constructions with high fire protection or environmental claims. Strong benefits The non-flammable, fully mineral Multipor flat roof insulation DAA belongs to building material class A1- incombustible. In the case of a fire no toxic fumes and smoke. The mineral raw materials in case of fire even inhibit the spread of flames. • Suitable for the insulation of flat roofs in cold and warm roof constructions • Varitey of roof constructions of the unloaded, unused roof until the highly compressed park roof structure or roof terraces • Maximum stability and compressive strength of 300 kPa • building practice upsetting free • Best fire protection - incombustible • Officially approved • Tested with all common sealing systems • Ageing, shape and volume resistance • Purely mineral, fiber and free of pollutants • Easy and safe to handle For proper planning of flat roofs with a slope please contact the Multipor Experts from the beginning, to find the right structures for your needs. The system solution presented here is structured by way of example for a first planning. The suitability and specification must be made in each case in consultation with the involved planners.

Multipor flat roof insulation DAA In the thermal insulation of flat roofs, the insulation materials used must meet high standards. Multipor is a highly pressure-resistant, compression-free mineral insulation and ideally suited for flat roof insulation. They are particularly suitable for trafficable areas and flat roof constructions with high fire protection or environmental claims. Strong benefits The non-flammable, fully mineral Multipor flat roof insulation DAA belongs to building material class A1- incombustible. In the case of a fire no toxic fumes and smoke. The mineral raw materials in case of fire even inhibit the spread of flames. • Suitable for the insulation of flat roofs in cold and warm roof constructions • Varitey of roof constructions of the unloaded, unused roof until the highly compressed park roof structure or roof terraces • Maximum stability and compressive strength of 300 kPa • building practice upsetting free • Best fire protection - incombustible • Officially approved • Tested with all common sealing systems • Ageing, shape and volume resistance • Purely mineral, fiber and free of pollutants • Easy and safe to handle For proper planning of flat roofs with a slope please contact the Multipor Experts from the beginning, to find the right structures for your needs. The system solution presented here is structured by way of example for a first planning. The suitability and specification must be made in each case in consultation with the involved planners.

Promistyl® V is a wall cladding Insulated composite panel made of mineral woolcore between prepainted steel with visible fixing Several finishings such as ribbed : standard, Linéa 100, Microline or Liss Thicknesses from 60 mm up to 300 mm according to requested thermal performances, Standard width 1000mm , on request 900mm or 1200 mm Colors and materials to be choosen in Colorissime® and material guide according to the environment Suitable for horizontal or vertical installation with span up to 8,5 ml

Facing Brick Smooth White Álava is the affordable choice for those projects that look for a white expression in their façades. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

It stands as the purest white model of La Paloma Cerámica y Gres. A unique texture combined with its spectacular color, make White Smooth Ártico the most in demand among the wide range of La Paloma Cerámica y Gres. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

A beautiful white smooth color that offers striking expressions, White Navarra provides high aesthetic and technical characteristics. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

White Oporto stands out by its smooth sand colour which provides an elegant and shiny look to the façade. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Grey Alicante is the lightest grey of La Paloma Cerámicas. It represents the required transition from white to grey in order to provide an entire color range. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Characterised by slight differences in its tone, Grey Escorial Smooth Brick plays with dark and light tonalities providing spectacular finishes in building façades. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Grey Otero Smooth Brick is presented as the most regular tone within the grey range of La Paloma Cerámicas. With a lighter appearance than Gris Escorial, Gris Otero is one of the most demanded models among klinker quality for both, the current architectural trend and its neutral color. Gris Otero is often used in different combinations. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Brown Asturias presents a brown hue that denotes a slight reddish tint, giving to the product strong charcter and to the façade, simplicity and elegance. This is the intermediate model among the brown range, just below Marrón Laredo and with less prone to red tone than Marrón Mieres. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Brown Galicia presents a brown color with slight differences in tone that provides to building façades high aesthetic and technical characteristics. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Brown Laredo is the darkest model with the most intense pigmentation of the brown range. A higher intense and traditional brown that approaches to what in general speaking is known as "chocolate brown". The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Brown Mieres has the lightest tone within the brown range, located in a chromatic scale between brown and red. Keeping on with current market demands, La Paloma Cerámicas offers a wide range of possibilities for projects that address this range of color. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Negro Lanzarote is the most purely black of La Paloma Cerámicas. Either with clear or dark mortar joints creates in buildings façades an effect of special elegance. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Timanfaya Blue especially attracts attention because of its special set of dark chromatics, offering an alternative to traditional blue façades. With sunlight, its sides offer a spectacular and different set of brightness giving a characteristic flashing image to the façade. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Black Orotava is the third in joining to the range of different blacks. Each one of these models covers a specific market demand. In this case, Negro Orotava brings to the architcts a less dark version of Negro Lanzarote Facing Brick. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Aragón Smooth Ochre is halway in intensity among the ochre range characterised for its variety in tones. Guadarrama will be the bick with less intensity and Castilla will be the darkest choice. Aragón works extremely well in natural environments, for this reason, it is widely used in residential areas with parks and gardens. The 4-face finish allows maximum use of the two stretches, saving in costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Clinker brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Castilla is the original among the ochre flashing range. With an unmistakable appearance countless examples of homes with Castilla Facing Brick are observed along the Spanish geography. Castilla Facing Brick works extremely well in natural environments, for this reason is widely used in residential areas with parks and gardens. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Guadarrama presents the clearest tone of the ochre flashing range. Since company origins this model has accompanied the catalogue and still working perfectly with greater acceptance in residential houses than in buildings, although there are examples of buildings with grat architectural value). The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Levante is a classic model in the catalogue of La Paloma Cerámicas. With an ochre hue and a very slight flashing, Levante draws smooth chromatics in façades. It is ideal for rustic environments. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Red Bilbao is the brick within the red range that does not present tonality variation. With high demand in the north of Spain, its klinker quality gives excellent performance to harsh climates. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Very characteristic from the British Islands, Red Inglés presents different tones of red which randomly placed, shapes an excellent aesthetic. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Red Granada is characterised by its red variety of tones. This unique way of shaping façades, adds aesthetic value in conjuction with a clear mortar joint. The 4-face finish allows maximum use of two stretches, saving on costs in terraces, internal partitions, fences etc. Natural and permanent Colour. The beauty of the wirecut bricks produced by La Paloma Cerámicas is permanent because it is achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Blue Cobalto Glazed Brick gives light and vitality to the façade. It stands for its characteristic blue bright resistance to time. La Paloma Cerámicas combines a long backgroud manufacturing facing glazed bricks using the latest technology in order to reach high quality finishes. Glazed bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

White Pirineo Matt is the white matt alternative for those projects that look for avoid glossy elements that could distort the original chromatic appearance reqired. It presents a pure white, giving to façades the advantages inherent to this color. La Paloma Cerámicas combines a long backgroud manufacturing facing bricks using the latest technology in order to reach high quality finishes. Pirineo bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

White Pirineo Glazed sets the white difference in façades due to its versatility and adaptability to the environment. A set of brights makes the building an "artistic expression". La Paloma Cerámicas combines a long backgroud manufacturing facing bricks using the latest technology in order to reach high quality finishes. Pirineo bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Black Arrecife gives a clean appearance that stands for its homogeneity. La Paloma Cerámicas combines a long backgroud manufacturing facing bricks using the latest technology in order to reach high quality finishes. Arrecife bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Grey Glazed has a bright finish grey texture. Withing the most demanded models, current architectonic trends look for neutral colors and this grey is presented as an affordable option. La Paloma Cerámicas combines a long backgroud manufacturing facing glazed bricks using the latest technology in order to reach high quality finishes. Glazed bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Green Glazed stands for the intensity of its green bright color. It is especially suitable for residential areas. La Paloma Cerámicas combines a long backgroud manufacturing facing glazed bricks using the latest technology in order to reach high quality finishes. Glazed bricks presents simple appearance giving great aesthetic characteristics to the façade. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

The range of Brick Slips Klinker of La Paloma Cerámicas is the same as that of Facing Bricks (same texture and color). Easy to fix with adhesive (cement, glue…) and simple tools (trowel, toothed spatula, tile cutter and nails). Fast and easy. Both for renovation or new work, Brick Slip is a fast and clean choice for cladding. Blanco Ártico Brick Slip is the most in demand among the wide range of La Paloma Cerámicas Catalogue. Natural and permanent Colour. The beauty of the stoneware bricks produced by La Paloma Cerámica y Gres is permanent because it achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

The range of Brick Slips Klinker of La Paloma Cerámicas is the same as that of Facing Bricks (same texture and color). Easy to fix with adhesive (cement, glue…) and simple tools (trowel, toothed spatula, tile cutter and nails). Fast and easy. Both for renovation or new work, Brick Slip is a fast and clean choice for cladding. Gris Otero Brick Slip is presented as the most regular tone within the grey range of La Paloma. With a lighter appearance than Gris Escorial, Gris Otero is one of the most demanded models among klinker quality for architectural trend and its neutral color. Gris Otero is often used in different combinations. Natural and permanent Colour. The beauty of the stoneware bricks produced by La Paloma Cerámica y Gres is permanent because it achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

The range of Brick Slips Klinker of La Paloma Cerámicas is the same as that of Facing Bricks (same texture and color). Easy to fix with adhesive (cement, glue…) and simple tools (trowel, toothed spatula, tile cutter and nails). Fast and easy. Both for renovation or new work, Brick Slip is a fast and clean choice for cladding. Ocre Guadarrama Brick Slip presents the clearest tone of the ocre flashing range. Since company origins this model has accompanied the catalogue and still working perfectly with greater acceptance in residential houses than in buildings, although there are examples of buildings with grat architectural value. Natural and permanent Colour. The beauty of the stoneware bricks produced by La Paloma Cerámica y Gres is permanent because it achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

The range of Brick Slips Klinker of La Paloma Cerámicas is the same as that of Facing Bricks (same texture and color). Easy to fix with adhesive (cement, glue…) and simple tools (trowel, toothed spatula, tile cutter and nails). Fast and easy. Both for renovation or new work, Brick Slip is a fast and clean choice for cladding. Rojo Bilbao Brick Slip is the model within red range that does not present tonality variation. With high demand in the north of Spain, its klinker quality gives excellent perormance to harsh climates. Natural and permanent Colour. The beauty of the stoneware bricks produced by La Paloma Cerámica y Gres is permanent because it achieved naturally, without additives, by way of a special treatment of the atmosphere within the kiln. This gives façades a prestigious appearance and raises the added value of the building. Suitable for extreme temperatures. For the saline and humid enviroments along the coast, the harshness of the mountain climates, the enourmous frost on the Spanish Meseta. Stoneware brick is the best one for withstanding the most adverse external agents. Low absorption and does not efflorescence. Since they are fired at 1,300 °C, they have very low porosity and, therefore, minimum absorption, considerably lower than that required by the regulations, so it does not cause frost and does not have any efflorescence.

Tempo 650 x 300 mm semi countertop basin unit with 2 doors

The 90 cm hob offers 3 induction zones on ceramic glass with chrome trim. It has a 7.4 kW of total power. <br>It offers the possibility to cook with big pots with its extra-large 300 mm cooking zone.<br>Its many professional options include a multifunction control (simmering, melting, and keep warm), timer, pause, residual heat indicator timer, pause, residual heat indicator, overheat cut-out, auto switch off and a child safety lock. <br>This hob also features a bridge zone, griddle function and griddle pan as well as an interface with slide control. It offers a 5 kW booster.<br> This induction hob has a standard installation.

Inward opening highly thermally insulated door system [LIST] Outstanding insulation with basic depth of: outer frame: 90 mm, leaf frame: 100 mm Weathertigtness and reistance to driving rain in accordance with DIN EN 12208 up to 300 PA, due to the use of a continuous centre gasket Leaf heights up to 2500 mm and leaf widths up to 1400 mm Burglar resistance up to WK2 in accordance with DIN V ENV 1627 High thermal insulation up to Uf = 1.4 W/m2K Design: inward opening face-fitted and Soft Line Easily integrated convenience features and security functions: easy-access door, access control, video camera [/LIST]

Purmo’s Delta Laserline column radiators integrate the state of the art technology with remarkable design, providing their Users with highest qualities of climate comfort and functionality. The world-unique laser welding method enables achievement of the perfect quality of execution combined with outstanding visual appearance. The characteristic feature – which inspired the radiators’ name – is the external shape of the columns, of the profile resembling the letter “D”, designed especially to maximize the heating surface area in comparison with analogical columns of the round shape. The construction and shape of the Delta radiators have been so designed as to facilitate maintaining them spotlessly clean, which is a vital feature when considering health care facilities application. High suitability of Purmo’s DELTA radiators for the rooms of elevated sanitary requirements is documented with the dedicated certifi cate, issued by the University of Kiel, Germany. Except for 27 radiator heights available as standard, at Clients’ wish any height can be manufactured in the range between 300 mm and 3000 mm, with the precision of 1 mm. Thanks to five types of the radiator’s segments (from 2 up to 6 columns), and a wide palette of RAL colours, the Delta Laserline radiators can be easily suited to any room, independently on the heat requirements or the Users’ preferences.

Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched.

Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: [LIST] Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched. [/LIST]

Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: [LIST] Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched. [/LIST]

Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: [LIST] Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched. [/LIST]

Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: [LIST] Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched. [/LIST]

Extruded polystyrene URSA XPS is an excellent thermal insulator that offers the following advantages: [LIST] Its closed cellular structure means very low thermal conductivity and high thermal insulation levels. URSA XPS has excellent mechanical properties, with a resistance to compression of 300 kPa. Zero water absorption makes URSA XPS a superior choice for roof insulation – flat or pitched. [/LIST]

Direct bond lining made up of a processed Enairgy Isopop® panel attached directly to the wall using dollops of MA Enairgy® adhesive mortar placed every 300 mm horizontally and 400 mm vertically. Commensurate amounts of Pladur® materials: joint compounds, adhesive mortar, joint tape, etc. Completely finished with Quality Level 1 (Q1) for tile finishes, laminates, furring, etc. Also with Level 2 (Q2), Level 3 (Q3) or Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a frame of galvanised sheet steel profiles over a base of Pladur® T-60 profiles set 300 mm apart, properly hung from the framing by means of Pladur® T-60 hanger brackets + Ø 6 mm threaded rod, and supported on Pladur® profiles attached mechanically around the whole perimeter. Pladur® Fon+ plasterboards are screwed to this frame. Commensurate amounts of Pladur® materials: screws, compounds, joint tape, resilient joints, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

Suspended ceiling made up of a twin frame of galvanised sheet steel profiles installed at different levels (D). The primary frame is made up of Pladur® T-60 profiles hung from the framing by means of Pladur® T-60 hanger brackets and Ø 6 mm threaded rod. The secondary frame is made up of Pladur® T-60 profiles spaced 300 mm apart, hung from the primary frame by means of Pladur® T-60 hanger brackets supported around the perimeter on angular or U track profiles which are attached mechanically along their whole length. Pladur® Fon+ plasterboards are screwed perpendicularly onto the secondary frame. Commensurate amounts of anchors, hangers, hangers, screws, resilient/acoustic perimeter joints, joint compounds and tapes, etc. Completely finished with Quality Level 2 (Q2), Level 3 (Q3), Level 4 (Q4), according to the surface finish (to be determined by the design). Installed according to Pladur® recommendations, UNE 102043 Standard and CTE requirements.

This product is only available for the Swedish market. Alterna 2Day high cabinet matches all colors to Alterna Every Day, Alterna Perfect Day and Alterna Nice Day Bathroom Furniture. Depth 340 mm, height 1600 mm. Available in 2 different widths, 300 and 400 mm. All cabinets have 2 doors, 2 glass shelves in the upper part and 2 glass shelves in the lower part.

Fabric designed for solar protection (especially "screen") OUTSIDE or INSIDE. SUNWORKER blocks up to 94% of the heat, and preserve in the same time visual contact to outside and use of natural daylight Designed to meet new needs in terms of solar protection, Sunworker combines transparency, resistance and fineness with visual and thermal comfort. Made using the Rachel Trameur method of weaving, it boasts excellent mechanical strength. Its regular grain and micro-aerated look ensure transparency that filters both sun light and solar heat. The fact that it has passed numerous European fire-resistance tests (M1, B1, Class1) makes it an ideal fabric for use in locations frequented by the public. Sunworker M1 is available in 150 and 300 cm widths.

Idealrain Luxe - 1 function showers (rain effect). Available diameters: 200 mm, 250 mm, 300 mm and 400 mm. Easy nozzles to be cleaned, to prevent limescale build-up. Flow reducer at 12 l / min. Ultrathin (4 mm). High performance delivery jet thanks to the nozzle arrangement. Standard 1/2 "connection.

Range 477 Paper towel basket - rectangular container made of perforated sheet metal with polyamide top - serves as waste bin for used paper towels - removable top holds and covers waste bags - free-standing or wall-mounted - 305 mm wide, 515 mm high and 300 mm deep - perforated sheet metal, white - made of high-quality polyamide according to HEWI colour chart Article no.: HEWI 477.05.20012

Range 801 L-shaped support rail - vertical and horizontal bars joined at right-angles with fixing roses made of steel - for holding on to and providing support - with continuous, corrosion resistant steel core - can be mounted in left hand or right hand position - for wall mounting with special HEWI fixing materials and roses - horizontal length 300 mm, vertical length 600 mm, 90 mm deep - bar diameter 33 mm, rose diameter 70 mm - made of high-quality polyamide according to HEWI colour chart - toilet roll holder upgrade kit 801.50.010, can be retrofitted Article no.: HEWI 801.22.100

Range 801 Support rail - rail with right-angled bends at the ends and steel fixing roses - for holding on to and providing support - with continuous, corrosion resistant steel core - for wall mounting with special HEWI fixing materials and roses - centre-to-centre 300 mm - bar diameter 33 mm, rose diameter 70 mm - made of high-quality polyamide according to HEWI colour chart Article no.: HEWI 801.36.100

Range 801 Stationary support - two parallel rails running one above the other joined by a connecting bend - for holding on to and providing support - weight capacity 100 kg - with continuous, corrosion resistant steel core and wall plate made of polyamide with integrated steel core - for wall mounting with wall-specific HEWI fixing material - concealed fixing - 600 mm projection, 259 mm high and 78 mm deep, 33 mm rail diameter - made of high-quality polyamide according to HEWI colour chart - toilet roll holder 801.50.010 and 801.50.011, WC flushing mechanism (radio-controlled) 801.50.060 and floor supports 950.50.021XA and 950.50.023XA for retrofitting - CE marking: Medical devices Class 1 according to Directive 93/42 / EEC Article no.: HEWI 801.50.300

Range 805 Wastepaper bin - cubic body with recessed wall base - serves as waste bin for used paper towels - capacity approx. 25 l - concealed, integrated bag holder - 300 mm wide, 510 mm high and 170 mm deep, wall-mounted base 15 mm deep - for wall mounting - made of high-quality stainless steel, satin surface finish - opening made of high-quality polyamide in HEWI 90 (jet black), 92 (anthracite grey), 98 (signal white) or 99 (pure white) Article no.: HEWI 805.05.100

Range 805 Hygiene combination - cubic body with recessed wall base - used as container for hygiene waste, capacity approx. 6 l - concealed, integrated bag holder - with an integrated holder for standard hygiene bags made of synthetic material. (max. package size L 130 x B 90 x H 20 mm) - lid with lifting flap - 160 mm wide, 300 mm high and 140 mm deep - for wall mounting - bin and lid made of high-quality stainless steel with satin surface finish - opening made of high-quality polyamide in HEWI 90 (jet black), 92 (anthracite grey), 98 (signal white) or 99 (pure white) - including non-corrosive HEWI fixing material. Article no.: HEWI 805.05.210

Range 805 Paper towel dispenser - cubic body with recessed wall base - used to hold standard paper towels with width from 240 - 250 mm and folded length / depth of 90 - 100 mm. (HEWI recommends paper towels with C-fold in folding position) - capacity approx. 300 - 450 paper towels - side level indicator - with locking system as protection against misuse - 300 mm wide, 360 mm high and 120 mm deep, wall-mounted base 15 mm deep - for wall mounting - made of high-quality stainless steel, satin surface finish - opening made of high-quality polyamide in HEWI colours 90 (jet black), 92 (anthracite grey), 98 (signal white) or 99 (pure white) Article no.: HEWI 805.06.500

Range 805 Support rail - rail with right-angled ends and fixing roses - for holding on to and providing support - for wall mounting with special HEWI fixing materials and roses - centre-to-centre 300 mm - bar diameter 33 mm, tube thickness 2 mm, rose diameter 70 mm - made of high-quality stainless steel, satin surface finish Article no.: HEWI 805.36.100

Support rail - straight rail with supports straight to the wall and roses - for holding on to and providing support - made of high-quality chrome-look coated polyamide that is warm to touch - with continuous, corrosion resistant steel core - length 300 mm, diameter of rail 33 mm, 90 mm deep - wall connection with discreet supports (diameter 18 mm) perpendicular to wall and flat roses - rose diameter 80 mm, cap height 13 mm - easy installation due to individually mountable fixing plates made of high-quality stainless steel for hanging the support rail - fixing with grub screw located on the underside of the rose - including non-corrosive HEWI fixing material Article no.: HEWI 950.36.10050

The new tehalit.BKG floor trunking is flush floor trunking which has a great deal to offer. This floor trunking is available in widths of 200, 300, 400 and 500 mm. It comes in heights of 60 and 80 mm. The three compartments inside the trunking have the following functions. Compartments 1 and 3 provide clean routing of power and data lines. The middle compartment is reserved for the end user. This is where the end user can insert their power or data devices into the sockets. In order to route cables from the trunking tested according to EN 50085, there are brush outlets on the front which are covered when not in use and thus present no risk of accident. Cast floors can be laid with recessed covers. The trunking system can be levelled from the inside or outside depending on the structural conditions. If levelled from the outside, the cable compartment for the lines also increases.

Block for load-bearing masonry with higher strength Ytong Statik 300 mm PD. Ytong Statik together with other elements of the system Ytong creates a unique and simple solution to build your house. A unique combination of strength, weight and thermal conductivity. Suitable for single layer load bearing masonry.

Block for load-bearing masonry with higher strength Ytong Statik 300 mm PD. Ytong Statik together with other elements of the system Ytong creates a unique and simple solution to build your house. A unique combination of strength, weight and thermal conductivity. Suitable for single layer load bearing masonry.

External block Ytong Standard 300 mm hladké. Ytong Standard together with other elements of the system Ytong creates a unique and simple solution to build your house with minimizing heat bridges. A unique combination of strength, weight and thermal conductivity. Good thermal insulation properties. Suitable for masonry with additional insulation.

External block Ytong Standard 300 mm PDK. Ytong Standard together with other elements of the system Ytong creates a unique and simple solution to build your house with minimizing heat bridges. A unique combination of strength, weight and thermal conductivity. Good thermal insulation properties. Suitable for masonry with additional insulation.

Block for load-bearing masonry with higher strength Ytong Statik Plus 300 mm hladké. Ytong Statik together with other elements of the system Ytong creates a unique and simple solution to build your house. A unique combination of strength, weight and thermal conductivity. Suitable for single layer load bearing masonry.

External block and block for inner load-bearing masonry Ytong Univerzal 300 mm hladké. Ytong Univerzal together with other elements of the system Ytong creates a unique and simple solution to build your house. A unique combination of strength, weight and thermal conductivity. Suitable for single layer with additional insulation external masonry.

External block and block for inner load-bearing masonry Ytong Univerzal 300 mm PDK. Ytong Univerzal together with other elements of the system Ytong creates a unique and simple solution to build your house. A unique combination of strength, weight and thermal conductivity. Suitable for single layer with additional insulation external masonry.

External block Ytong Standard 300 mm PDK. Ytong Standard together with other elements of the system Ytong creates a unique and simple solution to build your house with minimizing heat bridges. A unique combination of strength, weight and thermal conductivity. Good thermal insulation properties. Suitable for masonry with additional insulation.

Block for load-bearing masonry with higher strength Ytong Statik Plus 300 mm hladké. Ytong Statik together with other elements of the system Ytong creates a unique and simple solution to build your house. A unique combination of strength, weight and thermal conductivity. Suitable for single layer load bearing masonry.

External block and block for inner load-bearing masonry Ytong Univerzal 300 mm PDK. Ytong Univerzal together with other elements of the system Ytong creates a unique and simple solution to build your house. A unique combination of strength, weight and thermal conductivity. Suitable for single layer with additional insulation external masonry.

Block for load-bearing masonry with higher strength Ytong Statik 300 mm PD. Ytong Statik together with other elements of the system Ytong creates a unique and simple solution to build your house. A unique combination of strength, weight and thermal conductivity. Suitable for single layer load bearing masonry.

Self-supporting support frame built-in tank - 1,100 to 1,300 (H) x 350 (W) x 180 (D) mm

MasterTop WS 100 PU is a low emission universal polyurethane wall system, with a smooth and matt finish. MasterTop WS 200 PU is an elastic polyurethane wall system and MasterTop WS 300 PU is a fibreglass reinforced elastic polyurethane wall system. MasterTop WS series are polyurethane wall systems, smooth, low emission, with a matt finish and they can be applied where crack bridging, decorative, fire resistant, bearing low, medium or heavy impacts required: for example production areas, hospitals, warehouses and technology rooms, bathrooms, corridors, hotels. BENEFITS • Elastic • Low emission • Fire resistant • High impact strength • Seamless • Easy to apply • Crack bridging • Especially high-strength hygienic system • UV-stable • Color freedom • Elegant appearance • High resistance to bacteria, chemicals, discoloration and abrasion • Water-based