Original Object: Stretchy Line Olivier Dentan Nov 2007 http://pagesperso-orange.fr/archilib.od/ ~~~~~~~~~~~~~~~~~~~~~~~~~~ Modified : Vistasp Mehta Date : 24.11.2008 AC Version : 10 ~~~~~~~~~~~~~~~~~~~~~~~~~~ History ~~~~~~~~~~~~~~~~~~~~~~~~~~ Date : 24.11.2008 1. slightly reduced distance of text from line. 2. changed scaling of text. 3. starting point is no longer stretchable; it made the line length inaccurate. 4. added select by hotline. I prefer that to a couple of hard-to-find hotspots. 5. added ability to write levels at start and end of pipeline. 6. added ability to calculate second point level based on given slope. ~~~~~~~~~~~~~~~~~~~~~~~~~~ Date : 28.11.2008 1. Olivier Dentan pointed out one error each in the Master Script and Parameter Script. FIXED 2. He also pointed out that #3 above is not the case. Looks like I messed something up. The original object he submitted works perfectly. ~~~~~~~~~~~~~~~~~~~~~~~~~~2D drainage line

A small carpet.

Viertelgewendelte Stiege - Winkel kann verändert werden Der Ausgangspunkt ist die Eckstufenachse. Von hier aus wird die Gehlinie aufgeteilt. Die Stiegenbreite und auch der Gehlinenabstand können per editierbarem Hotspot verschoben werden. Der Stiegenanfang kann verschoben werden. Die Position der letzten geraden Stufe vor dem Verzugsbereich kann verschoben werden. Es sind 3 verschiedene Arten des Stufenverzuges eingebaut: Evolvenmethode Kreismethode gleichmäßiges aufteilen Die innere Eckstufenbreite kann nachträglich verändert werden Weiters hinzugefügt: Es ist nun möglich - jedes Stufeneck im Grundriss anzudassen und einfach zu verschieben! Als Konstruktionshilfe dazu habe ich noch hotlines in den berechneten Stufenkanten eingefügt. somit kann man mit den normalen Archicad-Hilfslinien arbeiten, um die Richtung zu halten, wenn man verschiebt! Im 3D wurde bisher nur einfache Trittstufen eingearbeitet. Allerdings ist es hier bereits möglich, den Eckwinkel und die Stiegenhöhe einzustellen - zu ziehen! 19.11.2014 - Geschoß-sensitive Darstellung im 2D: ganze Stiege, bis 1m, bis 1m und drüber strichliert, ab 1m 20.11.2014 - Eckpunkte sind nun verschiebbar, Schatten im drüberliegendem Geschoß hinzugefügt 21.11.2014 - Stufenbeschriftung hinzugefügt - verschiebbar und drehbar. Stufennummern sind nun Mitte Stufe von Gehlinie nach aussen versetzt 24.11.2014: In Grundriss und 3D: Stufenkanten sind nach Innen einzeln parallel verschiebbar (nur Stufenbelag). Laufplatte und Keilstufen hinzugefügt - noch ohne innere parallele Verschiebung Einstellung Materialien von Laufplatte und Belag möglich. Schraffuren bei Innenverschiebungen nachgeführt. Stufenbreiten auf halbe cm gerundet - und in die Berechnung weitergegeben. 25.11.2014 Bug Eckstufe Aussenecke war nicht verschiebbar - gefixt. Laufplatte und Keilstufen laufen nun mit Stufenverschiebungen mit. 26.11.2014 - Anschlußkörper unten - für deckenanschluß mit Hotspot - Polygon gelöst - Im Schnitt sichtbar. Materialien im 3D für Schnittdarstellung mit Schraffuren versehen 27.11.2014 Anschlußkörper für oberen Deckenanschluss hinzugefügt 28.11.2014 Anschlüsse oben und unten drehen sich nun mit den Antrittstufen mit, wenn sie geändert werden. einige Schraffur - Bugs geändert. 30.11.2014 Zusatz-Punkte für Wangen mit aufgesattelten Trittstufen hinzugefügt - inkl unterer und oberer Anschluss Aussen und Innenwangen hergestellt. Zusätzlich ein Text hinzugefügt, dass dies ein Demo-Objekt ist. Dies lässt sich durch Eingabe eines Codes deaktivieren 2.12.2014: Wangenstiegen: unterer Deckenanschlüsse neu konzipiert. untere Antrittsstufe - im 2D sichtbar falls gewünscht. Weitere SOE-Befehle bei Wangen: Sichtbarkeit der Stufenbeläge durch die Wangenaussenseite ein und ausschaltbar 8.12.2014: Tritt und Setzstufen sind nun für die meisten Konstruktionsarten verfügbar. 10.12.2014: Trittstufen vorne abgebogen - hinten aufgebogen - sind nun aufgesattelt, freitragend, auf Mittelwange und zwischen Wangen verfügbar. 12.12.2014: Eigenes Material Setzstufen, Mörtelbett Trittstufe hinzufügen 14.12.2014: Seitlicher Überstand Trittstufenbelag, Graphische Art -Abfrage nun Integer-Bezogen ohne Fehlermeldung. Einschaltbare Wangenabwicklung für nackte Stahlbetonstiege mit kompletter Bemassung von Eckstufe und Gehlinie aus. 18.12.2014 Anti-Rutschleisten (gelbe Streifen) hinzugefügt. 20.12.2014 Maskwerte der tragenden Groups geändert, Keilstufen bei Seiten- Wangen zur Gesamtgruppe hinzugefügt, Sockelleisten hinzugefügt. Texturen der Tritt und Setzstufen an der Gehlinie und dem jeweiligen Stufenwinkel ausgerichtet.

Viertelgewendelte Stiege - Winkel kann verändert werden Der Ausgangspunkt ist die Eckstufenachse. Von hier aus wird die Gehlinie aufgeteilt. Die Stiegenbreite und auch der Gehlinenabstand können per editierbarem Hotspot verschoben werden. Der Stiegenanfang kann verschoben werden. Die Position der letzten geraden Stufe vor dem Verzugsbereich kann verschoben werden. Es sind 3 verschiedene Arten des Stufenverzuges eingebaut: Evolvenmethode Kreismethode gleichmäßiges aufteilen Die innere Eckstufenbreite kann nachträglich verändert werden Weiters hinzugefügt: Es ist nun möglich - jedes Stufeneck im Grundriss anzudassen und einfach zu verschieben! Als Konstruktionshilfe dazu habe ich noch hotlines in den berechneten Stufenkanten eingefügt. somit kann man mit den normalen Archicad-Hilfslinien arbeiten, um die Richtung zu halten, wenn man verschiebt! Im 3D wurde bisher nur einfache Trittstufen eingearbeitet. Allerdings ist es hier bereits möglich, den Eckwinkel und die Stiegenhöhe einzustellen - zu ziehen! 19.11.2014 - Geschoß-sensitive Darstellung im 2D: ganze Stiege, bis 1m, bis 1m und drüber strichliert, ab 1m 20.11.2014 - Eckpunkte sind nun verschiebbar, Schatten im drüberliegendem Geschoß hinzugefügt 21.11.2014 - Stufenbeschriftung hinzugefügt - verschiebbar und drehbar. Stufennummern sind nun Mitte Stufe von Gehlinie nach aussen versetzt 24.11.2014: In Grundriss und 3D: Stufenkanten sind nach Innen einzeln parallel verschiebbar (nur Stufenbelag). Laufplatte und Keilstufen hinzugefügt - noch ohne innere parallele Verschiebung Einstellung Materialien von Laufplatte und Belag möglich. Schraffuren bei Innenverschiebungen nachgeführt. Stufenbreiten auf halbe cm gerundet - und in die Berechnung weitergegeben. 25.11.2014 Bug Eckstufe Aussenecke war nicht verschiebbar - gefixt. Laufplatte und Keilstufen laufen nun mit Stufenverschiebungen mit. 26.11.2014 - Anschlußkörper unten - für deckenanschluß mit Hotspot - Polygon gelöst - Im Schnitt sichtbar. Materialien im 3D für Schnittdarstellung mit Schraffuren versehen 27.11.2014 Anschlußkörper für oberen Deckenanschluss hinzugefügt 28.11.2014 Anschlüsse oben und unten drehen sich nun mit den Antrittstufen mit, wenn sie geändert werden. einige Schraffur - Bugs geändert. 30.11.2014 Zusatz-Punkte für Wangen mit aufgesattelten Trittstufen hinzugefügt - inkl unterer und oberer Anschluss Aussen und Innenwangen hergestellt. Zusätzlich ein Text hinzugefügt, dass dies ein Demo-Objekt ist. Dies lässt sich durch Eingabe eines Codes deaktivieren 2.12.2014: Wangenstiegen: unterer Deckenanschlüsse neu konzipiert. untere Antrittsstufe - im 2D sichtbar falls gewünscht. Weitere SOE-Befehle bei Wangen: Sichtbarkeit der Stufenbeläge durch die Wangenaussenseite ein und ausschaltbar 8.12.2014: Tritt und Setzstufen sind nun für die meisten Konstruktionsarten verfügbar. 9.12.2014: Hotspot-Bug entfernt zum Durchschalten der Konstruktionsarten, Gebogene Blechstufen hinzugefügt - Nur stufen, Eingeschweisst zwischen Wangen, Aufgesattelt auf Rand unf Mittelwangen

Viertelgewendelte Stiege - Winkel kann verändert werden Der Ausgangspunkt ist die Eckstufenachse. Von hier aus wird die Gehlinie aufgeteilt. Die Stiegenbreite und auch der Gehlinenabstand können per editierbarem Hotspot verschoben werden. Der Stiegenanfang kann verschoben werden. Die Position der letzten geraden Stufe vor dem Verzugsbereich kann verschoben werden. Es sind 3 verschiedene Arten des Stufenverzuges eingebaut: Evolvenmethode Kreismethode gleichmäßiges aufteilen Die innere Eckstufenbreite kann nachträglich verändert werden Weiters hinzugefügt: Es ist nun möglich - jedes Stufeneck im Grundriss anzudassen und einfach zu verschieben! Als Konstruktionshilfe dazu habe ich noch hotlines in den berechneten Stufenkanten eingefügt. somit kann man mit den normalen Archicad-Hilfslinien arbeiten, um die Richtung zu halten, wenn man verschiebt! Im 3D wurde bisher nur einfache Trittstufen eingearbeitet. Allerdings ist es hier bereits möglich, den Eckwinkel und die Stiegenhöhe einzustellen - zu ziehen! 19.11.2014 - Geschoß-sensitive Darstellung im 2D: ganze Stiege, bis 1m, bis 1m und drüber strichliert, ab 1m 20.11.2014 - Eckpunkte sind nun verschiebbar, Schatten im drüberliegendem Geschoß hinzugefügt 21.11.2014 - Stufenbeschriftung hinzugefügt - verschiebbar und drehbar. Stufennummern sind nun Mitte Stufe von Gehlinie nach aussen versetzt 24.11.2014: In Grundriss und 3D: Stufenkanten sind nach Innen einzeln parallel verschiebbar (nur Stufenbelag). Laufplatte und Keilstufen hinzugefügt - noch ohne innere parallele Verschiebung Einstellung Materialien von Laufplatte und Belag möglich. Schraffuren bei Innenverschiebungen nachgeführt. Stufenbreiten auf halbe cm gerundet - und in die Berechnung weitergegeben. 25.11.2014 Bug Eckstufe Aussenecke war nicht verschiebbar - gefixt. Laufplatte und Keilstufen laufen nun mit Stufenverschiebungen mit. 26.11.2014 - Anschlußkörper unten - für deckenanschluß mit Hotspot - Polygon gelöst - Im Schnitt sichtbar. Materialien im 3D für Schnittdarstellung mit Schraffuren versehen 27.11.2014 Anschlußkörper für oberen Deckenanschluss hinzugefügt 28.11.2014 Anschlüsse oben und unten drehen sich nun mit den Antrittstufen mit, wenn sie geändert werden. einige Schraffur - Bugs geändert. 30.11.2014 Zusatz-Punkte für Wangen mit aufgesattelten Trittstufen hinzugefügt - inkl unterer und oberer Anschluss Aussen und Innenwangen hergestellt. Zusätzlich ein Text hinzugefügt, dass dies ein Demo-Objekt ist. Dies lässt sich durch Eingabe eines Codes deaktivieren 2.12.2014: Wangenstiegen: unterer Deckenanschlüsse neu konzipiert. untere Antrittsstufe - im 2D sichtbar falls gewünscht. Weitere SOE-Befehle bei Wangen: Sichtbarkeit der Stufenbeläge durch die Wangenaussenseite ein und ausschaltbar 8.12.2014: Tritt und Setzstufen sind nun für die meisten Konstruktionsarten verfügbar. 10.12.2014: Trittstufen vorne abgebogen - hinten aufgebogen - sind nun aufgesattelt, freitragend, auf Mittelwange und zwischen Wangen verfügbar. 12.12.2014: Eigenes Material Setzstufen, Mörtelbett Trittstufe hinzufügen 14.12.2014: Seitlicher Überstand Trittstufenbelag, Graphische Art -Abfrage nun Integer-Bezogen ohne Fehlermeldung. Einschaltbare Wangenabwicklung für nackte Stahlbetonstiege mit kompletter Bemassung von Eckstufe und Gehlinie aus. 18.12.2014 Anti-Rutschleisten (gelbe Streifen) hinzugefügt. 20.12.2014 Maskwerte der tragenden Groups geändert, Keilstufen bei Seiten- Wangen zur Gesamtgruppe hinzugefügt, Sockelleisten hinzugefügt. Texturen der Tritt und Setzstufen an der Gehlinie und dem jeweiligen Stufenwinkel ausgerichtet. 30.3.2015 freigeschaltet

ANTENNA LOGARITMICA - TV La cura posta nella progettazione si riflette anche nella speciale connessione del dipolo che garantisce affidabilità del contatto nel tempo. Grazie allo speciale attacco a palo è possibile installare l’antenna sia in polarizzazione verticale sia in orizzontale senza adattatori o altri accessori. Dotate di eccellente resistenza meccanica di fissaggio degli elementi alla culla, ottima resistenza meccanica alla rotazione sul palo, buone prestazioni elettriche. Il connettore F è protetto da una copertura di gomma- CARATTERISTICHE •Banda III + UHF •Canali E5-E12 E21-E69 •Banda passante MHz 174-230 / 470-862 •Guadagno massimo dBi 9.5 / 11 •Rapporto avanti-indietro dB 24 / 32 •Return loss dB -16 / -16 5 •Larghezza del fascio (-3dB) ° +/- 34 +/- 31 •Impedenza Ohm 75 •Dimensioni (Lungh x Largh) cm 210x88 •Attacco a palo. Diametro max mm 60 •Connettore Tipo F •Polarizzazione orizzontale Incluso •Regolazione zenitale orizzontale PV10 •Polarizzazione verticale Incluso •Regolazione zenitale verticale PV10 PALO NON INCLUSO

VARIO R 921 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

#http://www.gdlfactory.fi/ --- © GDL FACTORY ----- ---- Jarkko Hoivala ------ Versio Pvm Muokannut Selite 1.0 24.06.2014 J. Hoivala Luotu Käyttäjävastuu -------------------------------- Objektin tuottaja tai tarjoaja eivät takaa objektien virheetöntä toimintaa. Objektin käyttäminen tapahtuu käyttäjän omalla vastuulla. Objekti tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.gdlfactory.fi/ --- © GDL FACTORY ----- ---- Jarkko Hoivala ------ Versio Pvm Muokannut Selite 1.0 24.06.2014 J. Hoivala Luotu Käyttäjävastuu -------------------------------- Objektin tuottaja tai tarjoaja eivät takaa objektien virheetöntä toimintaa. Objektin käyttäminen tapahtuu käyttäjän omalla vastuulla. Objekti tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

2D electric symbol with optional text and listing parameters.

COLLEZIONE DIALOGHI The Dialoghi collection, designed by Francesco Lucchese, is the fruit of a stylistic meditation on the experience of matter. Experience as a tool for exploring the world of creativity and design, matter as the starting and end point for enhancing the fundamentals that underlie a new approach to the mosaics. The Dialoghi collection makes it possible to create original and personalised mosaics choosing from a variety of woods, natural stones, glass and metal in an infinite exchange of forms and substances. For its Dialoghi collection, Mosaico+ has used the choicest raw materials and all-Italian high-tech production processes. Design: Francesco Lucchese.

COLLEZIONE DIALOGHI The Dialoghi collection, designed by Francesco Lucchese, is the fruit of a stylistic meditation on the experience of matter. Experience as a tool for exploring the world of creativity and design, matter as the starting and end point for enhancing the fundamentals that underlie a new approach to the mosaics. The Dialoghi collection makes it possible to create original and personalised mosaics choosing from a variety of woods, natural stones, glass and metal in an infinite exchange of forms and substances. For its Dialoghi collection, Mosaico+ has used the choicest raw materials and all-Italian high-tech production processes. Design: Francesco Lucchese.

Cicada_LV is an outdoor wall light featuring a modern refined design and manufactured in die-cast aluminium. The topLED source emits a homogeneous light beam that decorates the wall in a stylish elegant way, creating an interplay of lights and shadows. Glare is minimized thanks to a special black silk-screened glass. Available both in the single or double emission versions and in three different finishes, the lighting fixture has been designed for lighting urban settings, hotels and private homes.

Easy-to-install light profile characterized by a perfectly even light emitted by a thickness of just 10 millimetres. The article has been designed with the cable outlet located on the lower side to create continuous lines of light for a perfect integration with the surrounding space. The product is particularly indicated for sensational lighting of shops, hotels and private homes.

A light profile characterized by high brightness and flexible installation. The wall washer lighting lends itself to illuminating walls higher than 8 metres, and is suitable for spaces presenting limitations in the installation of the electrical system. PowerLED source and five optics for countless light effects. The product is fitted with a linear shade made of UV-resistant transparent extruded polycarbonate providing protection including at considerable heights. Among the product pluses, the anti-glare accessory for a lighting that does not hurt the eyes. Starline enhances architecture in urban lighting and in the illumination of hotels. Controllable also through DMX protocol.

A light profile characterized by high brightness and flexible installation. The wall washer lighting lends itself to illuminating walls higher than 8 metres, and is suitable for spaces presenting limitations in the installation of the electrical system. PowerLED source and five optics for countless light effects. The product is fitted with a linear shade made of UV-resistant transparent extruded polycarbonate providing protection including at considerable heights. Among the product pluses, the anti-glare accessory for a lighting that does not hurt the eyes. Starline enhances architecture in urban lighting and in the illumination of hotels. Controllable also through DMX protocol.

Steelwalk is an extremely sturdy drive-over bar. The AISI 316 stainless steel casing houses a powerLED source available in a wide choice of optics. It also comes with Wallwasher lenses emphasizing the textures of vertical surfaces. Easy installation is ensured by an outer casing, while the anti-vandal screws make this product highly reliable and safe. Steelwalk enhances architecture in urban lighting and in the illumination of hotels.

Steelwalk is an extremely sturdy drive-over bar. The AISI 316 stainless steel casing houses a powerLED source available in a wide choice of optics. It also comes with Wallwasher lenses emphasizing the textures of vertical surfaces. Easy installation is ensured by an outer casing, while the anti-vandal screws make this product highly reliable and safe. Steelwalk enhances architecture in urban lighting and in the illumination of hotels.

Easy-to-install outdoor light profile characterized by a perfectly even light emitted by a thickness of just 10 millimetres. The article has been designed with the cable outlet located on the lower side to create continuous lines of light for a perfect integration with the surrounding space. The product is particularly indicated for sensational lighting of urban facades and private homes.

Recessed for outdoor applications; drive-over up to 2000 kg; recessed (ceiling, wall, floor); body in stainless steel or anodized aluminium, trim in stainless steel or aluminium, screen in glass; finishes: stainless steel, grey; 1 power LED High Intensity, RGB: 3 power LEDs; 3.5W; 5W, 7W, 9W - 24Vdc; max 5W - max 500mA; includes 1.5 m neoprene cable, H05RN-F 2x0.75/0.75 Ø6.3 mm; RGB: includes 1.5 m FEP+PCP cable 6x0.50/0.50 Ø6.3 mm; total delivered lumens: 352 lm (34°, 5W, CRI 80), 463 lm (34°, 7W, CRI 80), 583 lm (34° , 9W, CRI 80); RGB: 183 lm (R 70 lm, G 90 lm, B 31 lm); optics: white: 5°, asymmetrical 8°, 8°, 11°, 17°, 21° sharp, 34°, 45°, 47°, 61° sharp, 68°, 13°x52; RGB: 20°, 34°, 45°, 21°x42°; LED colour: white - 2700K, 3000K, 4000K, RGB; ingress protection: IP68; impact resistance: IK10; equipped with IPS and PID; operating temperature: -20°C +45°C; screen temperature: max 40°C (Ta 25°C); Glow Wire Test: 960°; photobiological safety: risk group 1 in accordance with EN62471:2006; appliance class: III; weight 0.33 kg (aluminium trim), 0.44 kg (stainless steel trim); body dimensions Ø85x63mm; cut-out size Ø70mm; overall volume Ø180x125mm; dimming using a 24Vdc dimmer, dimming using a dimmable power supply unit; accessories: outer casing WC0100, outer casing WC0103, fixing spring WG0100, honeycomb louvre WH0201, semi-diffusing screen, half transparent and half frosted WE0400A, anti-glare screen, half transparent and half serigraphed black WE0400S

The Ytong VERTI 20 wall with internal insulation (ITI) has exceptional thermal, mechanical and fire protection properties. It is intended for the - load bearing walls for single-family houses and multi-familly and tertiary buildings - filling walls - Fire-protection partition walls in public or commercial buildings and tunnels. Its lightness and ease of handling make it particularly suitable for renovation and extension projects. Its thermal efficiency is 3 in 1: insulating masonry + thermal bridges correction + air tightness. The Ytong VERTI 20 + ITI wall contributes to the well-being of the occupants by its hygrothermal and environmental performance. The Ytong blocks constitues a simple, sustainable and economic constructive system.

The Ytong ThermStrong block is suitable for all load bearing and bracing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity λ = 0.10 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: F90-A from 7.5 cm - Economical and stable in value - Ergonomic processing

Combination Ytong Massive 20 cm and Multipor mineral insulation plates is suitable for walls for low energy buildings in combination with very good compressive strenght. The low dimensional tolerance enable rapid processing in the thin-bed method with a joint thickness of 1 to 3 mm. The result is a high-quality wall with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material allows a safe use and provide high fire protection. Advantages: - Thermal conductivity for YTONG λ10, dry = 0.18 W/(mK) - Thermal conductivity for Multipor λ10, dry = 0.042 W/(mK) - Provides healthy, balanced indoor climate - Very high fire protection level at least EI240 - Economical and stable in value - Ergonomic processing

<p>The cycle shelter KAPPA has become a popular feature in the public space. It´s designed mainly to function as a protection for bicycles, but it can also be used for other purposes such as protection for strollers and motorcycles. Together with the bicycle rack DELTA (or any other of our bicycle racks) it creates a complete and functional bikeparking solution.</p>

<p></p><p>The bicycle shelter LIGHT is designed to function as a protection for bicycles, charging stations, seat benches or elsewhere where needed in the public space. LIGHT is also available with an integrated solar cell system - SUNLIGHT. Together with the bicycle rack DELTA (or any other of our bicycle racks) it creates a complete and functional bike parking solution. </p>

CARBONA R565 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

CLASSIC R 400 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

SALINA R 580 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

VARIO R 931 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

VARIO R 932 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

VARIO R 941 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

Vascu R 752 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

Vascu_R 757 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

VASCU R 764 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

VASCU R 773 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

VASCU R 775 NF WILDER VERBAND 240 x 71 x 14 mm DIN 18515-1

#http://www.gdlfactory.fi/ --- © GDL FACTORY ----- ---- Jarkko Hoivala ------ Versio Pvm Muokannut Selite 1.0 24.06.2014 J. Hoivala Luotu Käyttäjävastuu -------------------------------- Objektin tuottaja tai tarjoaja eivät takaa objektien virheetöntä toimintaa. Objektin käyttäminen tapahtuu käyttäjän omalla vastuulla. Objekti tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.gdlfactory.fi/ --- © GDL FACTORY ----- ---- Jarkko Hoivala ------ Versio Pvm Muokannut Selite 1.0 24.06.2014 J. Hoivala Luotu Käyttäjävastuu -------------------------------- Objektin tuottaja tai tarjoaja eivät takaa objektien virheetöntä toimintaa. Objektin käyttäminen tapahtuu käyttäjän omalla vastuulla. Objekti tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.gdlfactory.fi/ --- © GDL FACTORY ----- ---- Jarkko Hoivala ------ Versio Pvm Muokannut Selite 1.0 24.06.2014 J. Hoivala Luotu Käyttäjävastuu -------------------------------- Objektin tuottaja tai tarjoaja eivät takaa objektien virheetöntä toimintaa. Objektin käyttäminen tapahtuu käyttäjän omalla vastuulla. Objekti tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.molok.com Version Date Modified by Info ---------------------------------------------------------------------------------------------- 1.0 26.02.2010 JH Ready for use 1.1 24.09.2010 JH Simplier materials, Margins 2d / 3d, Margin hotspots 1.2 13.10.2010 JH Works together with all Molok-objects 1.3 21.10.2010 JH Modifications on volyme of biowaste / Composite framing option 1.4 16.12.2013 JH Fixed Lithera, updated usability 1.5 05.02.2015 JH UI-update compatible AC18, Lifting hook & Container 3D Käyttäjävastuu --------------------------------------------------------------------------------- GDL Factory tai Molok Oy eivät takaa objektien virheetöntä toimintaa. Objektien käyttäminen tapahtuu käyttäjän omalla vastuulla. GDL Factory tai Molok Oy eivät ole vastuussa, jos objektien käytöstä aiheutuu suoraa tai välillistä taloudellista tai muuta vahinkoa. Objektikirjasto tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.molok.com Version Date Modified by Info ---------------------------------------------------------------------------------------------- 1.0 26.02.2010 JH Ready for use 1.1 24.09.2010 JH Simplier materials, Margins 2d / 3d, Margin hotspots 1.2 13.10.2010 JH Works together with all Molok-objects 1.3 21.10.2010 JH Modifications on volyme of biowaste / Composite framing option 1.4 16.12.2013 JH Fixed Lithera, updated usability 1.5 05.02.2015 JH UI-update compatible AC18, Lifting hook & Container 3D Käyttäjävastuu --------------------------------------------------------------------------------- GDL Factory tai Molok Oy eivät takaa objektien virheetöntä toimintaa. Objektien käyttäminen tapahtuu käyttäjän omalla vastuulla. GDL Factory tai Molok Oy eivät ole vastuussa, jos objektien käytöstä aiheutuu suoraa tai välillistä taloudellista tai muuta vahinkoa. Objektikirjasto tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.molok.com Version Date Modified by Info ---------------------------------------------------------------------------------------------- 1.0 26.02.2010 JH Ready for use 1.1 24.09.2010 JH Simplier materials, Margins 2d / 3d, Margin hotspots 1.2 13.10.2010 JH Works together with all Molok-objects 1.3 21.10.2010 JH Modifications on volyme of biowaste / Composite framing option 1.4 16.12.2013 JH Fixed Lithera, updated usability 1.5 05.02.2015 JH UI-update compatible AC18, Lifting hook & Container 3D Käyttäjävastuu --------------------------------------------------------------------------------- GDL Factory tai Molok Oy eivät takaa objektien virheetöntä toimintaa. Objektien käyttäminen tapahtuu käyttäjän omalla vastuulla. GDL Factory tai Molok Oy eivät ole vastuussa, jos objektien käytöstä aiheutuu suoraa tai välillistä taloudellista tai muuta vahinkoa. Objektikirjasto tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.gdlfactory.fi/ --- © GDL FACTORY ----- ---- Jarkko Hoivala ------ Versio Pvm Muokannut Selite 1.0 24.06.2014 J. Hoivala Luotu Käyttäjävastuu -------------------------------- Objektin tuottaja tai tarjoaja eivät takaa objektien virheetöntä toimintaa. Objektin käyttäminen tapahtuu käyttäjän omalla vastuulla. Objekti tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.gdlfactory.fi/ --- © GDL FACTORY ----- ---- Jarkko Hoivala ------ Versio Pvm Muokannut Selite 1.0 24.06.2014 J. Hoivala Luotu Käyttäjävastuu -------------------------------- Objektin tuottaja tai tarjoaja eivät takaa objektien virheetöntä toimintaa. Objektin käyttäminen tapahtuu käyttäjän omalla vastuulla. Objekti tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.gdlfactory.fi/ --- © GDL FACTORY ----- ---- Jarkko Hoivala ------ Versio Pvm Muokannut Selite 1.0 24.06.2014 J. Hoivala Luotu Käyttäjävastuu -------------------------------- Objektin tuottaja tai tarjoaja eivät takaa objektien virheetöntä toimintaa. Objektin käyttäminen tapahtuu käyttäjän omalla vastuulla. Objekti tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.gdlfactory.fi/ --- © GDL FACTORY ----- ---- Jarkko Hoivala ------ Versio Pvm Muokannut Selite 1.0 24.06.2014 J. Hoivala Luotu Käyttäjävastuu -------------------------------- Objektin tuottaja tai tarjoaja eivät takaa objektien virheetöntä toimintaa. Objektin käyttäminen tapahtuu käyttäjän omalla vastuulla. Objekti tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.gdlfactory.fi/ --- © GDL FACTORY ----- ---- Jarkko Hoivala ------ Versio Pvm Muokannut Selite 1.0 24.06.2014 J. Hoivala Luotu Käyttäjävastuu -------------------------------- Objektin tuottaja tai tarjoaja eivät takaa objektien virheetöntä toimintaa. Objektin käyttäminen tapahtuu käyttäjän omalla vastuulla. Objekti tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

# Electronic dispenser that produces an even aroma level 24 hours a day for one month # Easy to open with a button on top of the dispenser # Silent # Low energy consumption. Powered by one LR20 1.5 V battery (not supplied) # Three different modes: light detection, ON 24/7, OFF (to disconnect mode).

# Electronic dispenser that produces an even aroma level 24 hours a day for one month # Easy to open with a button on top of the dispenser # Silent # Low energy consumption. Powered by one LR20 1.5 V battery (not supplied) # Three different modes: light detection, ON 24/7, OFF (to disconnect mode).

Here, the awning is guided by a zipper fused to the fabric and by a flexible PVC inlay in the guide rail. This increases stability and prevents annoying light gaps from forming between the awning fabric and the guide. At a width of just 25 mm, the guide rail enables optimal integration of the sun shading system into the building facade. Since the start of the current year, our lineup of window awnings with ZIP guidance has been expanded to include two new cover panel sizes: the size 9 cover panel (our smallest model) and the size 15 cover panel (our largest model). For a smooth transition from the unit to the facade, the flush-mount deep guide rail (on the size 13 cover panel) can be used. When extended, the window awnings with ZIP guidance can withstand max. wind speeds of up to 24.4 m/s. Construction limit values: [LIST] max. width: 4000 mm max. height: 6000 mm [/LIST]

[LIST] Horizontal sliding wall with single-point stainless steel fixings Ideal for Shopfront, Shopfront with thermal insulation requirements, internal room partition The HSW-GP is characterised by the use of MANET single-point fixings in combination with a standard track rail. The system’s high-quality stainless steel components and flush-mounted single-point fixings perfectly match the demands of modern architecture. Different parking layouts available Glass types Toughened safety glass 8 mm to 24 mm, Toughened laminated safety glass 12 mm to 28mm. Insulating glass on request Max. system height 3000 mm Max. panel width 1100 mm. Max. panel weight 120 kg (depends on type of panel) Panel types Bedstop end panel, Single action sliding panel, Sliding panel [/LIST]

[LIST] Transmittance TL [%] 17 - 82 Transmission Colour bluish, bronze, yellowish, greenish, slightly greenish, neutral Outdoor Reflection Colour bluish, bronze, champagne, golden, green-bluish, slightly bluish, neutral, silver Outdoor reflectance Rle [%] 11 - 40 Indoor reflectance Rli [%] 12 - 37 Transmittance Ra [%] 79 - 99 g-value 0.14 - 0.62 Shading coefficient SC 0.16 - 0.71 Selectivity [TL/g] 1.05 - 2.42 Ug [W/m²K] 0.4 - 1.2 Rw(C;Ctr) [dB] 35(-2;-6), 36(-3;-7), 37(-2;-5), 38(-3;-7), 39(-2;-5), 41(-2;-5), 41(-2;-4) Nominal thickness [mm] 24.8 - 51.1 Weight [kg/m²] 30.8 - 66.2 [/LIST]

The Tork Elevation® Matic® Roll Hand Towel Dispenser with Intuition® Sensor presents the most advanced electronic system in the industry today. The touch-free electronic virtually eliminates cross contamination while cutting back on supply waste. Each unit features a choice of two dispensing modes. The towel remains inside the cabinet until the user activates the sensor, delivers maximum hygiene. An adjustable towel length of 8 inches to 24 inches, and a stub roll compartment combine to deliver more precise control of consumption are a few of the features available. Batteries lasts up to 40 rolls on average with normal usage. It's easy to reach and simple to reload. Versatile Installation- can be mounted directly to wall or within a recessed compartment. Numerous back-plate mounting slots fit most any pattern. Utilizes any Tork H1 Roll Towel. Uses 3 "D size" batteries.

The Tork Elevation® Matic® Roll Hand Towel Dispenser with Intuition® Sensor presents the most advanced electronic system in the industry today. The touch-free electronic virtually eliminates cross contamination while cutting back on supply waste. Each unit features a choice of two dispensing modes. The towel remains inside the cabinet until the user activates the sensor, delivers maximum hygiene. An adjustable towel length of 8 inches to 24 inches, and a stub roll compartment combine to deliver more precise control of consumption are a few of the features available. Batteries lasts up to 40 rolls on average with normal usage. It's easy to reach and simple to reload. Versatile Installation- can be mounted directly to wall or within a recessed compartment. Numerous back-plate mounting slots fit most any pattern. Utilizes any Tork H1 Roll Towel. Uses 3 "D size" batteries.

E0673 BULKSTOR, THIS TYPICAL INCLUDES: 2 Panel, Hard Npwr 47”H x 18”W; 1 Panel, Hard Pwr 47”H x 24”W; 5 Panel, Hard Npwr 47”H x 24”W; 1 Panel, Hard Pwr 47”H x36”W; 1 Panel, Hard Pwr W/Com Port 47”H x36”W; 1 Panel, Hard Pwr 47”H x 48”W; 2 Panel ,Hard Pwr W/Com Port 47”H x 48”W; 1 Panel, Hard Pwr 53”H x 24”W; 3 Panel, Hard Npwr 53”H x 24”W; 19 Panel, Hard Npwr 85”H x 18”W; 1 Panel, Hard Pwr 85”H x 24”W; 1 Panel, Hard Npwr 85”H x 24”W; 4 Panel, Hard Npwr 85”H x 30”W; 1 Panel, Hard Pwr 85”H x 36”W; 1 Panel, Hard Npwr 85”H x 36”W; 1 Panel, Hard Npwr 85”H x 42”W; 4 Panel, Hard Pwr 85”H x48”W; 16 Panel, Hard Npwr 85”H x48”W; 1 Open Panel Frame Pwr W/Com Port 85”H x 36”W; 1 Open Panel Frame Pwr 85”H x 48”W; 3 Open Panel Frame Pwr W/Com Port 85”H x 48”W; 3 Duplex Rcp, 6/Pkg; 3 Duplex Rcp, Dedicated 6/Pkg; 2 Ceiling Pwr Entry, 47”H; 3 Ceiling Pwr Entry, 85”H; 2 Wk Surf, Lam 24”D x 48”W; 3 Wk Surf, Lam 24”D x 72”W; 1 Wk Surf, Corner, Lam 24”D x 48”W; 2 Trans Surf, Lam Top 48”W; 2 Trans Surf, Lam Top 72”W; 2 Lateral File, Lam 24”W; 2 Shelf, Storage/Display 36”W; 147 Shelf ,Storage/Display 48”W; 2 Flip Dr Unit, Fab, W/Lock 24”W; 2 Flip Dr Unit, Fab, W/Lock 36”W; 3 Flip Dr Unit, Fab, W/Lock 48”W; 3 Tackboard, 36”W; 4 Tackboard, 48”W; 1 Tool Bar, 24”W; 3 Tool Bar, 36”W; 7 Tool Bar, 48”W; 1 Equip Rail,Wall-Mt,48”W; 1 Adapter Rail,48"W; 1 Work Surf, Hvy-Duty 24”D x 48”W; 1 Work Surf 24”D x 48”W; 24 Shelf, 48”W; 24 Shelf

Small laboratory centrifuge with variable speed allowing both regular and delicate centrifugation. It has a brake to allow a complete stop in 10 seconds, 0 to 30 minute timer, interchangeable heads and can accommodate up to 24 tubes. Used for blood grouping and cross matching.

Microhematocrit centrifuge. Characteristics/components include speed up to 13000 RPM, a flat head to accommodate 24 capillary tubes, electronic automatic timer that times from 2-15 minutes, built-in precise hematocrit scale and a removable carrying tray. Used for determination of hematocrits.

Bench type radioisotope fumehood. Characteristics/components include a glove-box, a 75 cfm. blower with indicating switch and variable speed power stat and manometer mounted on box front to indicate air flow, 1/4" safety glass viewing panel, three polarized and grounded electrical outlets with indicating switches, a 24 inch fluorescent light with fixtures and switch, two 8 inch double grooved glove ports and neoprene gloves, an inlet filter, two absolute filters with connecting hoses and 40 inches of 2 inch spiral exhaust hose with clamps and a variable height mobile bench, 30-37"H. Unit is customized to fit the specified use requirements.

Refrigerated rotary microtome/cryostat. The unit's features include horizontal advancement, sectioning from 2-20 microns, combination unit consisting of an automatic defrost of chamber and microtome, a temperature range from -30 degrees centigrade to room temperature, and a defrost cycle of 10 minutes every 24 hours. Used to prepare samples for slide studies.

Automatic tissue processor. This is a rotating basket immersion type unit that uses a minimum of 10 solvents and two paraffin processing stations. It is controlled by an electrical or electronic timer. The paraffin bath temperature ranges from 50-65 degrees centigrade and is agitated. The fumes are removed by an integral fume collecting system. The process time/step is adjustable between 15 minutes to 24 hours. The drain time/step is 0 to 1 minute. Used to fix, dehydrate, clear and infiltrate tissue specimens to preserve the integrity of their cellular components for light microscopy.

Ice cube maker approximately 39" H x 29" D x 26" W. This unit is self-contained and provides 250 pounds of ice every 24 hours. The exterior is made of sturdy stainless steel. It is used in hospitals, hotels, and restaurants for dispensing ice.

TARALAY IMPRESSION COMPACT 0,7 is a multi-layered vinyl floorcovering, available in 2m wide sheet, with a group T wear rating. The product comprises a compacted backing reinforced with a glass fibre and a printed design that is protected by a transparent wear layer (0.70 mm thick). It offers 8 dB sound insulation and an indentation resistance of ca. 0.03 mm. The flooring is equipped with Protecsol® 2, patented surface treatment obtained by UV laser cross-linking offering the best chemical resistance to the main products used in healthcare environment as betadine, eosin, hydro alcoholic solutions, making the maintenance easy and the floor long lasting. This treatment avoids applying any acrylic emulsion throughout the lifetime of the product. It is free of formaldehyde, heavy metals and CMR 1 & 2 or vPvB (very persistent and very bio accumulative) or PBT (persistent, bio-accumulative and toxic) and is 100% REACH compliant. Its VOC emissions after 28 days (ISO 16000-6) are below detection levels (<10 μg / m3) and this product is classified A + (the best class) and Floorscore® & M1 certified for indoor air quality. Taralay Impression Compact has antibacterial efficacy (E.coli / S.aureus / MRSA) : >99% after 24 hours according to ISO22196.

TARALAY IMPRESSION COMFORT 0,65 is an acoustic multi-layered vinyl floorcovering, available in 2m wide sheet, with a group T wear rating. The product comprises a Very High Density (VHD) foam backing reinforced with a glass fibre and a printed design that is protected by a transparent wear layer (0.65 mm thick). It offers 19 dB sound insulation and an indentation resistance of ca. 0.08 mm. The flooring is equipped with Protecsol® 2, patented surface treatment obtained by UV laser cross-linking offering the best chemical resistance to the main products used in healthcare environment as betadine, eosin, hydro alcoholic solutions, making the maintenance easy and the floor long lasting. This treatment avoids applying any acrylic emulsion throughout the lifetime of the product. It is free of formaldehyde, heavy metals and CMR 1 & 2 or vPvB (very persistent and very bio accumulative) or PBT (persistent, bio-accumulative and toxic) and is 100% REACH compliant. Its VOC emissions after 28 days (ISO 16000-6) are below detection levels (<10 μg / m3) and this product is classified A + (the best class) and Floorscore® & M1 certified for indoor air quality. Taralay Impression Comfort Plus has antibacterial efficacy (E.coli / S.aureus / MRSA) : > 99% after 24 hours according to ISO22196.

TARALAY UNI COMFORT is an acoustic multi-layered vinyl floorcovering, available in 2m wide sheet, with a group T wear rating. The product comprises a Very High Density (VHD) foam backing reinforced with a glass fibre and a calendered wearlayer with colour within the 0,65mm thickness. It offers 17 dB sound insulation and an indentation resistance of ca. 0.11mm. It has a plain coloured design, making it ideal for cut design work. It is protected by a UV cured surface treatment Protecsol® which facilitates ease of maintenance and eliminates the need of an acrylic emulsion (metallisation). It is free of formaldehyde, heavy metals and CMR 1 & 2 or vPvB (very persistent and very bio accumulative) or PBT (persistent, bio-accumulative and toxic) and is 100% REACH compliant. Its VOC emissions after 28 days (ISO 16000-6) are below detection levels (<10 μg / m3) and this product is classified A + (the best class) and Floorscore® & M1 certified for indoor air quality. Taralay Impression has antibacterial efficacy (E.coli / S.aureus / MRSA) : > 99% after 24 hours according to ISO22196.

INLIO is a luminaire for office premises with direct-indirect emanation. It uses the latest LED, the edge lifting technology and Tunable White.The luminaires are in two variants – with a central cup with control electronics in the middle of the luminaire and a luminaire with a large luminous area with no central distribution with the control unit located in the recessed ceiling cup.The luminaire has a minimalist design. Throughout the entire circumference it is only 24 mm wide, with bevelled edges so it seems to be even optically thiner. Rounded edges and wavy structure give the luminaire the characteristic features and significant differentiation. When designing, the inspiration consisted in technical properties of the luminaire and cooling of the LED chips for the functioning of the cooler which replaces in this case the body of the luminaire itself. It is aesthetically adapted to rounded shapes in order not too industrially but rather luxurious and timeless. Design Matúš Opálka. Availability from 06/2016

INLIO is a luminaire for office premises with direct-indirect emanation. It uses the latest LED, the edge lifting technology and Tunable White.The luminaires are in two variants – with a central cup with control electronics in the middle of the luminaire and a luminaire with a large luminous area with no central distribution with the control unit located in the recessed ceiling cup.The luminaire has a minimalist design. Throughout the entire circumference it is only 24 mm wide, with bevelled edges so it seems to be even optically thiner. Rounded edges and wavy structure give the luminaire the characteristic features and significant differentiation. When designing, the inspiration consisted in technical properties of the luminaire and cooling of the LED chips for the functioning of the cooler which replaces in this case the body of the luminaire itself. It is aesthetically adapted to rounded shapes in order not too industrially but rather luxurious and timeless. Design Matúš Opálka. Availability from 06/2016

MIPOLAM ESPRIT is a vinyl flooring homogeneous pressed in 2m sheets, with a thickness of 2mm and a weight ≤ 2780 g. The non-directional design with colour throughout the thickness is available in 24 references presenting a nice matt finish. This flooring is suitable for heavy duty traffic areas, and facilitates floor–wall junctions, angles and welding treatments. The flooring is equipped with Evercare ™, patented surface treatment obtained by UV laser cross-linking offering the best chemical resistance to the main products used in healthcare environment as Betadine, eosin, hydro alcoholic solutions, making the maintenance easy and long lasting the flooring. This treatment avoids applying any acrylic emulsion throughout the lifetime of the product. It is composed of 45% minerals, 22% of inexhaustible material and at least 25% of recycled 100% controlled. It is free of formaldehyde, heavy metals and CMR 1 & 2 or vPvB (very persistent and very bio accumulative) or PBT (persistent, bio-accumulative and toxic) and is REACH compliant. COV emissions after 28 days (ISO 16000-6) are below detection levels with <10 μg / m3 and this product is classified A + (the best class). On demand, MIPOLAM ESPRIT is available with phthalate free. The flooring is antistatic (<2kV), its residual indentation is ≤ 0.02 mm to 150 minutes respecting EN 433. The flooring complies with EN 649 (34-43) offering a group T wear rating suitable for heavy duty traffic areas and Bfl-s1 fire resistance.

MIPOLAM ELEGANCE is a monolayer homogeneous flooring with a high PVC content pressed in 2m sheets, with a thickness of 2mm and a weight of ≤ 2850g. The non directional design with colour throughout the thickness integrates a 3D effect (transparent particles in pure PVC on all 33 references) and a matt finish. This flooring is recommended for administrative buildings making skirtings easier, as well as angles and welding. The flooring is equipped with Evercare™ the latest improvements in polyurethane surface treatment obtained by UV laser cross-linking. This Evercare™ treatment avoids staining of chemical products used in Healthcare like betadine, eosin or anti-bacterial hand gel and increases the durability of the flooring. This treatment has excellent maintenance characteristics and does not require the application of acrylic polishes. The flooring is composed of minimum 25% recycled content 100% controlled and is REACH compliant. This flooring is anti-static (<2kV), fungistatic and bacteriostatic and resistant to the main chemical products used in healthcare (no impact of betadine after 24 hours). The product is non reactive to residual indentation with a value ≤ 0,02 mm (EN 433) The flooring complies with EN 649 (34-43) offering a group T wear rating suitable for heavy duty traffic areas and Bfl-s1 fire resistance. The product emission rate of volatile organic compounds is <10 µg/m3 (TVOC after 28 days ISO 16000-6).

<p>MIPOLAM COSMO is a vinyl flooring homogeneous calendered and pressed in 2m sheets, with a thickness of 2mm and a weight ≤ 3000g.<br>The semi-directional design with colour throughout the thickness is available in 24 references presenting a nice matt finish.<br>This flooring is suitable for medium to high traffic areas, and facilitates floor–wall junctions, angles and welding treatments. <br>The flooring is equipped with Evercare ™, patented surface treatment obtained by UV laser cross-linking offering the best chemical resistance to the main products used in healthcare environment as Betadine, eosin, hydro alcoholic solutions, making the maintenance easy and long lasting the flooring. <br>This treatment avoids applying any acrylic emulsion throughout the lifetime of the product. <br>It is composed of 45% minerals, 22% of inexhaustible material and at least 25% of recycled 100% controlled. It is free of formaldehyde, heavy metals and CMR 1 & 2 or vPvB (very persistent and very bio accumulative) or PBT (persistent, bio-accumulative and toxic) and is REACH compliant. <br>COV emissions after 28 days (ISO 16000-6) are below detection levels with < 10 μg / m3 and this product is classified A + (the best class). <br>On demand, MIPOLAM COSMO is available with phthalate free.<br>The flooring is antistatic (< 2kV), its residual indentation is ≤ 0.02 mm. <br>The flooring is a group P wear rating suitable for heavy duty traffic areas and Bfl-s1 fire resistance.</p>

The line of K ECOSMART G minibars enables hoteliers to choose eco-friendly and ultra-quiet products of the last generation with an exclusive design. Thanks to the new compressors, which offer best performance, with cyclopentane insulation, cooling gas (R600), and the eutectic plate that keeps temperature constant at night (when compressor is OFF), K ECOSMART G products are part of the A+++ Energy Class with a consumption reduced by 79% compared to the leading absorption minibars on the market. The electronic timer: sets the working phases of the compressor. Minimum 6 hrs over 24 (the energy consumption are extremely low). The Smart System controls the turning on and off of the compressor based on the presence or absence of the guest in the room. The use of the Smart System requires the presence in the room of an Energy Saver device: a card-holder designed to save energy. To operate, the Smart System does not require any electronic timer or remote control. *** G: Global 50/60 Hz ***

The line of K ECOSMART G minibars enables hoteliers to choose eco-friendly and ultra-quiet products of the last generation with an exclusive design. Thanks to the new compressors, which offer best performance, with cyclopentane insulation, cooling gas (R600), and the eutectic plate that keeps temperature constant at night (when compressor is OFF), K ECOSMART G products are part of the A+++ Energy Class with a consumption reduced by 79% compared to the leading absorption minibars on the market. The electronic timer: sets the working phases of the compressor. Minimum 6 hrs over 24 (the energy consumption are extremely low). The Smart System controls the turning on and off of the compressor based on the presence or absence of the guest in the room. The use of the Smart System requires the presence in the room of an Energy Saver device: a card-holder designed to save energy. To operate, the Smart System does not require any electronic timer or remote control. *** G: Global 50/60 Hz ***

PowerCat 6 Patch Panels are the premier Molex patch panel product line. A key product used in both Category 6 link and channel gigabit ethernet applications. The IDC section consists of V-shaped contacts that flex not fatigue when terminated. Each port features a patented spring-loaded shutter and can be colour coded to match jack outlets. Offering both front and rear labelling options, the patch panel is constructed of cold-rolledsteel for additional strength and durability. [LIST] Available in 1U 24 Port and 2U 48 Port density Each port features the patented spring-loaded shutter: prevents incomplete mating, protects from dust and contaminants Patented IDC V-shaped contacts that flex not fatigue when terminated Features pointed IDC towers to speed termination and enhance cable retention Dual colour-coding allows for 568 A/B wiring configuration Front and rear port labelling as well as panel identification label 4 x 6 ganged jack configuration Individually removable patch panel ports Integral cable management shelf ensures bend radius compliance Available with either ANSI or metric hardware kit Can be terminated using industry standard punchdown tools RJ-11& RJ-12 compatible Molded category identification on each port face as well as optional port identification icon [/LIST]

Fixed window [LIST] Complete thermal break (frame, opening and threshold) Clipped window sill after frame mounting Glazing thickness of 24, 30, 42 or 48 mm (double or triple). Insulated glazing with argon filling [/LIST]

Ditec Civik is the pedestrian door operator for interior sliding doors with one or two wings, versatile, silent, easy to install. It features extremely compact sizes (both width and height) and a trendy silver (EURAS C0) finish. It's the architects' choice for its slim and modern look, perfect with full glass and technical glass attachments. Ditec Civik is designed for up to 80 kg (2 wings) and the 24 V dc gear motor with encoder ensures smooth, fluid movement and maximum safety of installation and operation. The automation system is set as a standard in Low Energy function for maximum safety of use. The Control Unit and accessories allow to tune the setting of the door, offering various operating modes: PUSH&OPEN, PULL&CLOSE, sensor-based opening, push-button opening, or opening via radio using the GOL4 remote controls or a special radio function selector. Customers are always sure to find the setting level they require. Ditec Civik fully complies to relevant International Standards.

The ease of assembly and versatility of application make Ditec Rex the right automation system for a wide range of contexts. The gearmotor and Control Unit are combined in a single element, speeding up installation. The max operating speed is 1.2 m/s (2 wings) and the max load is 140 kg (2 wings). Ditec Rex comes with a 24 V dc motor which grants optimum setting and safety of operation, an advanced Control Unit with microprocessor logic, and an electronic anti-crush device based on encoder technology. It is possible to add in a very simple way back-up batteries to guarantee operation in case of power failure. A wide range of solutions and accessories are available to meet every need. Ditec Rex is extremely safe and reliable: the system is tested for 1,000,000 cycles and complies with all European directives and EN 16005.

Ditec DAB105 is an electromechanical servo-assisted automation system for swing doors with spring, with 24 Vdc gear motor and encoder-managed kinematics, for safe and reliable management of door movement in every situation. The silent operation and clean, elegant look make Ditec DAB105 the preferred choice for swing doors in the commercial and public sector applications. The powerful gear motor easily moves wings up to 200 kg of weight or over 1.2 m of width. Ditec DAB105 can work in both push or pull mode with dedicated arms connecting the opener to the door panel. The numerous operation modes (Low Energy, PUSH&GO, Power Assist, sensor control, push-button control, etc.), as well as the possibility to easily manage double-wing swing opening make Ditec DAB105 an ideal solution that easily adapts to any requirement. A wide choice of accessories and control devices completes the product range. Ditec DAB105 fully complies with all European directives including EN 16005.

Due to a force of 400 N in a very compact housing of just 35 x 24 mm (W x H), KS4 chain drives are currently the most powerful NSHEV drives of this class in the international market. The new and unique, on both sides mounted connector solution allow a series connection of up to three drives and a locking drive. The direct mounting without consoles as well as the M-COM for self-learning configuration in multi-drive systems greatly simplify the installation. The integrated microprocessor can communicate via data bus with control units of AUMÜLLER. In the context of modern façade automation systems, different situational speeds and forces can thus be driven. [LIST] Electronic speed control for smooth motor running Low noise due to vibration-bearing motor Suitable for surface mounted drives and concealed fitting within profiles Universal brackets and casement brackets for all common profile systems Sidebow roller chain of high-quality stainless steel with recessed rivets heads, for large opening angles with the smallest possible bending radii Chain completely retracts into the housing to ease profile integrated mounting of the drives Programmable feedback contact for end positions "CLOSED" or "OPEN" Two-sided connector for connecting cable, protected against polarity reversal M-COM for automatic synchronised run of multi drive applications and automatic sequence control with FV locking drives (S3/S12 SW V2) [/LIST]

Ceramaguard combines 100% humity resistance with good levels of both sound absorption and sound attenuation, making it ideal for higher humity environments when installed on Armstrong Prelude 24 NC non-corrosive grid.

The black painted finely fissured surface of Colortone Fine Fissured provides good sound absorption and, in combination with Prelude 24 black grid, provides a solution for cinemas and other areas requiring a black ceiling system.

Hydroboard can resist permanent RH up to 95% and temporary conditions of up to 100% RH. Install with Armstrong Prelude 24 NC non-corrosive grid system for higher humidity areas.

<p>Bison ScrewJack Pedestals are designed to support heavy pavers over any waterproofed structural surface. Each pedestal utilizes a patented threaded design, making the leveling process during installation a simple turn of the pedestal base. This allows contractors, designers and installers to accurately plan, precisely align, and uniformly install level decks with a combination of ease, speed and accuracy. Integrated spacer tabs ensure accurate spacing, lock the pavers in place, and allow water to drain. <em>Note: Bison ScrewJack Pedestals are sold exclusively in the US and Canada through Oldcastle Westile and their distributors.</em></p> <ul><li>Supports 1000 lbf (4.45 kN) FS:3 per pedestal</li><li>Pedestal tab width 3/16 inch (4.5 mm)</li><li>Adjustable system height range is 1 ¼ to 36 inches (32 to 914.4 mm)</li><li>Bison Brace System required for 24 to 36 inches (609.6 to 914.4 mm)</li><li>Accessories available for heights from 1/8 to 1 ¼ inches (3.175 to 57.15 mm)</li><li>Pedestals made of High Density Copolymer Polypropylene</li><li>Contains 20% post-industrial recycled material</li><li>Impervious to water, mold, and freeze/thaw cycles</li><li>Made in the U.S.A.</li></ul>

<p>Bison Versadjust Pedestals give maximum design flexibility for a variety of surface materials including wood deck tiles, concrete pavers, stone pavers, and more. Pavers supported by Versadjust Pedestals integrate seamlessly creating a roof deck system that is as simple as it is beautiful. Precise spacer tabs allow for deck drainage, and the screw-to-adjust pedestals ensure perfectly level decks.</p><ul><li>Supports 1250 lbf (5.56 kN) FS:3 per pedestal</li><li>Select 1/8 or 3/16 inch (3.175 or 4.5 mm) tab size for pedestals</li><li>Integrated base levelers accomodate 0 to ½ inch per foot slope (0-4%)</li><li>Adjustable system height range is 2 ¼ to 36 inches (57.15 to 914.4 mm)</li><li>Bison Brace System required for 24 to 36 inches (609.6 to 914.4 mm)</li><li>Accessories available for heights from 1/8 to 2 ¼ inches (3.175 to 57.15 mm)</li><li>Contains 20% post-industrial recycled material</li><li>Impervious to water, mold, and freeze/thaw cycles</li><li>Made in the U.S.A.</li></ul>

Vasque à poser, sans trou de trop-plein. Ø 41 cm.  Percement du plan : Ø 24 cm.  PURE: Esthetic style Bonde de vidage recommandée : E78292.

Ditec DAB105 is an electromechanical servo-assisted automation system for swing doors with spring, with 24 Vdc gear motor and encoder-managed kinematics, for safe and reliable management of door movement in every situation. The silent operation and clean, elegant look make Ditec DAB105 the preferred choice for swing doors in the commercial and public sector applications. The powerful gear motor easily moves wings up to 200 kg of weight or over 1.2 m of width. Ditec DAB105 can work in both push or pull mode with dedicated arms connecting the opener to the door panel. The numerous operation modes (Low Energy, PUSH&GO, Power Assist, sensor control, push-button control, etc.), as well as the possibility to easily manage double-wing swing opening make Ditec DAB105 an ideal solution that easily adapts to any requirement. A wide choice of accessories and control devices completes the product range. Ditec DAB105 fully complies with all European directives including EN 16005.

Linear profile for outdoor applications, drive-over up to 5000 kg; recessed (ceiling, wall, ground); body in stainless steel, screen in PMMA; 24 SMD low power LEDs; RGB: SMD full colour LED; 3W - 24Vdc; RGB: 4,5W - 24Vdc; includes 1,5 m neoprene cable, H05RN-F 2x0,35/0,75 Ø6,3 mm; RGB: includes 1,5 m FEP+PCP cable (equivalent to H05RN-F cable), 4x0,50/0,50 Ø6,3 mm; total delivered lumens: 70 lm (2800K); diffuse optics; LED colour: white - 2600K, 2800K, 3700K; RGB; ingress protection: IP67; impact resistance: IK10; equipped with IPS; operating temperature: -20°C+45°C; screen temperature: max 40°C (Ta 25°C); photobiological safety: risk group 2 in accordance with EN62471:2006; appliance class: III; weight 0,70 kg/m; dimensions 260x20x43 mm; dimming using a 24Vdc dimmer; accessories: aluminium outer casing WC8110, outer casing for plasterboard WC8310, stainless steel outer casing WC8150, anti-fall kit WN8101

This striking bicycle rack is called Street, a ground-breaking product designed to create secure parking for urban cyclists. The bicycle rack is three-sided and proportioned according to standard-sized parking slots for cars. With the number of city cyclists increasing every year, Street makes good use of redundant parking places as each section provides space for eight bicycles. Street’s modular system makes it possible to expand parking from eight to 16, 24, 30, and so on. Not only is Street a flexible way to provide more bicycle parking in the city – its striking design makes it easy for cyclists to spot. Design: Nola.

Refrigerated Cabinet AGR 1002 GN 2/1 - AISI-304 stainless steel exterior, rear side galvanized panel - AISI-304 stainless steel interior, stamped bottom and rounded corners - AISI-304 stainless steel inner sides, 24 press-formed supports for GN 2/1 containers or shelves - Doors with self closing system, blocked opening, magnetic gasket and possibility of changing the opening sense - Key lock as standard - LED lighting - GN 2/1 shelves made of plasticized steel wire, height adjustable - AISI -304 adjustable legs, 135 to 200 mm - Hinged front control panel, allows easy access to the condenser unit - Monoblock refrigeration system: condenser unit + evaporator - Fan assisted condenser unit - Fan assisted evaporator, with epoxi anticorrosion coating - Evaporator fan stops when door is opened - Automatic evaporation of defrost water - 40 Kg/m³ density polyurethane insulation, zero GWP and zero ODP - Digital temperature control, optimized defrost, door open and hightemperature condensation alarms. Efficient management of energy consumption

The GLS-PART-CN is a sleek, surface-mount partition sensor that utilizes the dependable Cresnet® wired network for power and communications. Designed with hospitality environments in mind, this easily installed sensor uses an infrared (IR) beam to sense the position of movable partitions within a space. The IR beam’s signal strength is adjustable and features a sensing distance of up to four feet, making the GLS-PART-CN a versatile partition sensor with optimized sensing accuracy. Three LEDs on the unit provide at-a-glance information on the sensor’s state of power, communications, and partition detection. The GLS-PART-CN offers mounting options for rooms with finished or droptile ceilings. The GLS-PART-CN has plug-in outputs and built-in time delays. Also, the partition sensor easily connects via Cresnet® to a Crestron control processor to manage divisible room environments. Cresnet The GLS-PART-CN uses the dependable Cresnet wired network for communication between devices. Cresnet provides a simple solution for configuring and wiring sensors as part of any complete Crestron system. Cresnet is the communications backbone for Crestron lighting dimmers, keypads, shades, thermostats, and many other devices. This flexible 4-wire bus provides data communications and 24 Volts DC power for all of the devices on the Cresnet network. Versatile Installation The GLS-PART-CN has a white finish and can mount directly into finished ceilings. For droptile ceilings, the GLS-PART-CN installs into a 1-gang, 3-1/2 inch deep electrical box. In both instances, a decorator-style faceplate[1] can be used to match the GLS-PART-CN with the color of the room. Only about 20 mm of the GLS-PART-CN is visible after installation, making it an unobtrusive addition to a room. Digital Output This sleek sensor delivers unparalleled versatility through an additional output on the terminal block, which can be used as an alternate method of integration with a Crestron Control System® or other system. The 5th pin of the Cresnet connector provides either a 24 Volt, 10 mA output or a closure to ground, perfect for connection with a Versiport or digital input port. Notes: 1. Sold separately.

Range 477 Shelf - shelf with all-round edge - anti-theft locking system - 600 mm wide, 26 mm high and 140 mm deep - made of high-quality polyamide in HEWI colours 24 (orange), 33 (ruby red), 55 (aqua blue), 74 (apple green), 84 (umber), 86 (sand), 95 (stone grey), 97 (light grey), 98 (signal white), 99 (pure white) - including non-corrosive HEWI fixing material. Article no.: HEWI 477.03.100

Range 801 Shower curtain rail with ceiling support - vertically and horizontally arranged rails connected at right-angles, with curtain rings - for installing a shower curtain - mounted on the wall and ceiling using non-corrosive HEWI fixing materials and roses - curtain rail for shower tray 1200 x 1200 mm, centre-to-centre dimension 1183 x 1183 mm, can be shortened at the ends on site to 220 mm minimum - ceiling support 500 mm long, length can be adjusted by 10 mm and can be shortened at the rose by a maximum of 100 mm - rail diameter 33 mm - with 24 curtain rings - made of high-quality polyamide according to HEWI colour chart - with aluminum core Article no.: HEWI 801.34.1161

Side-hung door-window with lock Inwards opening 1 or 2 leafs Complete thermal break (frame, opening and threshold) Clipped window sill after frame mounting Glazing thickness of 24, 30, 42 or 48 mm (double or triple) Insulated glazing with argon filling

Window opening inside : Inwards opening 1 or 2 leafs, with or without one tilt&turn leaf and bottom hung opening Complete thermal break (frame, opening and threshold) Clipped window sill after frame mounting Glazing thickness of 24, 30, 42 or 48 mm (double or triple). Insulated glazing with argon filling

Left bath grab bar, 49 x 24 cm. A multitude of pieces come out of architectonic forms that dominate with their resistance. A comprehensive collection of accessories with a timeless and elegant design.

Floor slabs in wood-cement and concrete beams for external separations. Acoustic isolation Rw=60 dB, Thermal isolation U=0,28 W/m²K and U=0,24 W/m²K (complete with floor), Fire Resistence REI 240

Right bath grab bar, 49 x 24 cm. A multitude of pieces come out of architectonic forms that dominate with their resistance. A comprehensive collection of accessories with a timeless and elegant design.

120 x 2 x (H) 105 cm - Weight : 24,3 kg

Separate bowl Baby - Dim. 38 x 27 x Seat height 24,5 / total 31 cm Weight: 7.5 kg

Suspended bowl lengthened without flange - 70 x 36 cm Weight: 24.6 kg