Klaus Varioparker 2015 Система 2015 является разновидностью гаражного подъемника модели 2061. Оптимальна для помещений с невысокими потолками. Option for the SingleUp 2061 (Klaus SingleVario 2061). Suitable for areas with reduced ceiling height. Ideal combination for long-time and short-time parkers. Made by Dmitry Gutorkin. ABV-Group

Viertelgewendelte Stiege - Winkel kann verändert werden Der Ausgangspunkt ist die Eckstufenachse. Von hier aus wird die Gehlinie aufgeteilt. Die Stiegenbreite und auch der Gehlinenabstand können per editierbarem Hotspot verschoben werden. Der Stiegenanfang kann verschoben werden. Die Position der letzten geraden Stufe vor dem Verzugsbereich kann verschoben werden. Es sind 3 verschiedene Arten des Stufenverzuges eingebaut: Evolvenmethode Kreismethode gleichmäßiges aufteilen Die innere Eckstufenbreite kann nachträglich verändert werden Weiters hinzugefügt: Es ist nun möglich - jedes Stufeneck im Grundriss anzudassen und einfach zu verschieben! Als Konstruktionshilfe dazu habe ich noch hotlines in den berechneten Stufenkanten eingefügt. somit kann man mit den normalen Archicad-Hilfslinien arbeiten, um die Richtung zu halten, wenn man verschiebt! Im 3D wurde bisher nur einfache Trittstufen eingearbeitet. Allerdings ist es hier bereits möglich, den Eckwinkel und die Stiegenhöhe einzustellen - zu ziehen! 19.11.2014 - Geschoß-sensitive Darstellung im 2D: ganze Stiege, bis 1m, bis 1m und drüber strichliert, ab 1m 20.11.2014 - Eckpunkte sind nun verschiebbar, Schatten im drüberliegendem Geschoß hinzugefügt 21.11.2014 - Stufenbeschriftung hinzugefügt - verschiebbar und drehbar. Stufennummern sind nun Mitte Stufe von Gehlinie nach aussen versetzt 24.11.2014: In Grundriss und 3D: Stufenkanten sind nach Innen einzeln parallel verschiebbar (nur Stufenbelag). Laufplatte und Keilstufen hinzugefügt - noch ohne innere parallele Verschiebung Einstellung Materialien von Laufplatte und Belag möglich. Schraffuren bei Innenverschiebungen nachgeführt. Stufenbreiten auf halbe cm gerundet - und in die Berechnung weitergegeben. 25.11.2014 Bug Eckstufe Aussenecke war nicht verschiebbar - gefixt. Laufplatte und Keilstufen laufen nun mit Stufenverschiebungen mit. 26.11.2014 - Anschlußkörper unten - für deckenanschluß mit Hotspot - Polygon gelöst - Im Schnitt sichtbar. Materialien im 3D für Schnittdarstellung mit Schraffuren versehen 27.11.2014 Anschlußkörper für oberen Deckenanschluss hinzugefügt 28.11.2014 Anschlüsse oben und unten drehen sich nun mit den Antrittstufen mit, wenn sie geändert werden. einige Schraffur - Bugs geändert. 30.11.2014 Zusatz-Punkte für Wangen mit aufgesattelten Trittstufen hinzugefügt - inkl unterer und oberer Anschluss Aussen und Innenwangen hergestellt. Zusätzlich ein Text hinzugefügt, dass dies ein Demo-Objekt ist. Dies lässt sich durch Eingabe eines Codes deaktivieren 2.12.2014: Wangenstiegen: unterer Deckenanschlüsse neu konzipiert. untere Antrittsstufe - im 2D sichtbar falls gewünscht. Weitere SOE-Befehle bei Wangen: Sichtbarkeit der Stufenbeläge durch die Wangenaussenseite ein und ausschaltbar 8.12.2014: Tritt und Setzstufen sind nun für die meisten Konstruktionsarten verfügbar. 10.12.2014: Trittstufen vorne abgebogen - hinten aufgebogen - sind nun aufgesattelt, freitragend, auf Mittelwange und zwischen Wangen verfügbar. 12.12.2014: Eigenes Material Setzstufen, Mörtelbett Trittstufe hinzufügen 14.12.2014: Seitlicher Überstand Trittstufenbelag, Graphische Art -Abfrage nun Integer-Bezogen ohne Fehlermeldung. Einschaltbare Wangenabwicklung für nackte Stahlbetonstiege mit kompletter Bemassung von Eckstufe und Gehlinie aus. 18.12.2014 Anti-Rutschleisten (gelbe Streifen) hinzugefügt. 20.12.2014 Maskwerte der tragenden Groups geändert, Keilstufen bei Seiten- Wangen zur Gesamtgruppe hinzugefügt, Sockelleisten hinzugefügt. Texturen der Tritt und Setzstufen an der Gehlinie und dem jeweiligen Stufenwinkel ausgerichtet. 30.3.2015 freigeschaltet

BPP007 LED-MP/740 PSU II GR 60P BPP007 - LED Medium Power - Power supply unit - Posttop for diameter 60 mm Under new regulations, all mercury-based lamps are prohibited from 2015 onwards. This means that all luminaires using these lamps need to be replaced as well. However, the installed base of these luminaires is huge, and the municipalities do not have the budget for such largescale replacement, especially in this period of economic austerity. At the same time, the municipal authorities are facing tremendous pressure to save energy and to reduce light pollution of the night sky (many mercury installations have a transparent bowl, sending light everywhere).StreetSaver is an affordable, high-quality solution that enables the municipalities to address all these issues at once by changing their mercury- based luminaires to a LED system – for only limited investment.

#http://www.idobathroom.com www.bimlab.fi changelog 15.06.2006 -initial release 1.9.2008 -added to Seven D

#http://www.idobathroom.com www.bimlab.fi changelog 01.03.2005 -renamed furniture series 01.03.2005 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2009 -Trend series new productcodes 15.06.2006 -oak frame 01.03.2005 -renamed furniture series 01.03.2005 -modifications for skandinavian and russian market 01.10.2003 -info about handles 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2013 -initial release

Parametric 2D Masonry Unit detail, in plan, elevation and side view (seen as elevation or section - ver 2015.01). For more information contact Nader Belal naderbelal@hotmail.com or visit my blog http://nbbim.wordpress.com/

#http://www.idobathroom.com www.bimlab.fi changelog 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.02.2007 -initial release 01.09.2008 -added 400mm wide shelf

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2013 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.bimlab.fi changelog 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -new products, 2 drawers 01.02.2007 -initial release 01.09.2008 -new prodactcodes for frame

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -new wc model 77115----painonappi 69080 korvattu napilla 69083 -napit 69084, 69086 ja 69087 lisätty -installation fixture 91372 lisätty 01.01.2009 -new installationfixtures 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.05.2014 -new buttons 01.01.2009 -new installationfixtures 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -painonappi 69080 korvattu napilla 69083 -napit 69084, 69086 ja 69087 lisätty -installation fixture 91372 lisätty 01.09.2008 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2013 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -new wc model 77115----painonappi 69080 korvattu napilla 69083 -napit 69084, 69086 ja 69087 lisätty -installation fixture 91372 lisätty 01.01.2009 -new installationfixtures 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.03.2005 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -all new cabinets 01.09.2008 -initial release

#http://www.idobathroom.com www.archiapu.fi changelog 01.09.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -all new cabinets 01.09.2008 -initial release

#http://www.idobathroom.com www.archiapu.fi changelo 01.09.2007 -outgoing products 15.06.2006 -initial release

Detalle 2d parámetrico de unidades de fábrica o de albañería, in planta, alzado y vista lateral (vistos como alzados or como sección - ver 2015.01). Para más información contactar Nader Belal naderbelal@hotmail.com o visita mi blog http://nbbim.wordpress.com/

#http://www.idobathroom.com www.bimlab.fi changelog 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2008 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2013 -outgoing 11186 01.01.2009 -outgoing and new products 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idokylpyhuone.com www.archiapu.fi changelog 01.07.2010 -retaken in white 01.11.2004 -modifications for skandinavian and russian market 26.10.2004 -3D modified, error for cutpoly 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2007 -just white, no more colours 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial releasese

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2013 -outgoing 11186 01.01.2009 -outgoing and new products 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2007 -just white, no more colours 01.11.2004 -modifications for skandinavian and russian market 01.10.2003 -fixed a error caused by bad cutpolya 01.03.2003 -initial release

#http://www.idobathroom.com www.archiapu.fi changelog 01.01.2009 -outgoing products 01.09.2007 -outgoing and new products 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.05.2009 -autoflush outgoing 01.01.2009 -new and outgoing products 01.09.2007 -just white, no more colours 01.11.2004 -modifications for skandinavian and russian market 01.10.2003 -infotxt for arm supports 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2013 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2013 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2013 -initial release

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2013 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.11.2004 -object renamed, name before "d1 Pozzi-Gri wall-hung bide" 01.11.2004 -modifications for skandinavian and russian market 01.10.2003 -installation fixture added 01.10.2003 -3D modified 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.05.2009 -series renamed 15.06.2006 -door 60 not available 01.03.2005 -renamed furniture series 01.03.2005 -modifications for skandinavian and russian market 01.11.2003 -info-text handles included 01.11.2003 -ean-code added 93231 01.10.2003 -fixed front adapter arch 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.05.2009 -series renamed 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.11.2004 -modifications for skandinavian and russian market 01.03.2004 -backgroudn fill for 2D 01.03.2004 -new and outgoing products 01.03.2004 -fixed outlet distance 01.10.2003 -fixed graphical error in basin 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.11.2004 -modifications for skandinavian and russian market 01.03.2004 -background fill for 2D 01.10.2001 -fixed graphical error in outlet 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.05.2009 -series renamed 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2013 -taken back agen to salescatalog 01.07.2010 -taken back agen to salescatalog 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.05.2009 -series renamed 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2007 -just white, no more colours 01.11.2004 -modifications for skandinavian and russian market 01.10.2003 -fixed a error caused by bad cutpolya 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.05.2009 -series renamed 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2007 -just white, no more colours 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial releasese

#http://www.idobathroom.com www.bimlab.fi changelog 01.05.2009 -series renamed 01.11.2004 -modifications for skandinavian and russian market 01.10.2003 -mirroring 2D disabled 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.05.2009 -series renamed 01.11.2004 -modifications for skandinavian and russian market 01.10.2001 -fixed graphical error in outlet 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.05.2009 -series renamed 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.05.2009 -series renamed 01.11.2004 -modifications for skandinavian and russian market 26.10.2004 -3D modified, error for cutpoly 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.05.2009 -series renamed 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.bimlab.fi changelog 01.05.2009 -series renamed 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.05.2009 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 2014 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 2014 -initial release

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -new products, 2 drawers 01.02.2007 -initial release 01.09.2008 -new prodactcodes for frame

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 - 2 drawerversion with 1000mm design based on e1

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 - 2 drawerversion with 1200mm design based on e1

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -change in colours and design 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -change in colours and design 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -change in colours, tabletop removed 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -change in colours 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -all new cabinets 01.09.2008 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.02.2007 -initial release 01.09.2008 -shelves added

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2008 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -change in colours 01.09.2008 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2008 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2008 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.02.2007 -initial release 06.08.2009 -fixed error for shelf material

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2008 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2008 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2008 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.archiapu.fi changelog 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2013 -initial release

#msktp://www.idobathroom.com www.bimlab.fi changelog 01.04.2013 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.05.2014 -new buttons 01.01.2009 -new installationfixtures 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -new products, 2 drawers 01.02.2007 -initial release 01.09.2008 -new prodactcodes for frame

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -initial release

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2009 -Trend series new productcodes 15.06.2006 -oak frame 01.03.2005 -renamed furniture series 01.03.2005 -modifications for skandinavian and russian market 01.10.2003 -info about handles 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2007 -just white, no more colours 01.11.2004 -modifications for skandinavian and russian market 01.10.2003 -fixed graphical error in tap hole 01.03.2003 -initial release

#http://www.idobathroom.com www.archiapu.fi changelog 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.01.2009 -outgoing 14121 01.11.2004 -object renamed, name before "a1 Pozzi-Ginori washbasin" 01.11.2003 -corrected product data 14321 01.10.2003 -corrected product data 01.10.2003 -corrected height 14321 01.10.2003 -fixed graphical error in top surface 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.01.2009 -outgoing 14121 01.11.2004 -object renamed, name before "a1 Pozzi-Ginori washbasin" 01.11.2003 -corrected product data 14321 01.10.2003 -corrected product data 01.10.2003 -corrected height 14321 01.10.2003 -fixed graphical error in top surface 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.01.2009 -outgoing 14121 01.11.2004 -object renamed, name before "a1 Pozzi-Ginori washbasin" 01.11.2003 -corrected product data 14321 01.10.2003 -corrected product data 01.10.2003 -corrected height 14321 01.10.2003 -fixed graphical error in top surface 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.01.2009 -outgoing 14121 01.11.2004 -object renamed, name before "a1 Pozzi-Ginori washbasin" 01.11.2003 -corrected product data 14321 01.10.2003 -corrected product data 01.10.2003 -corrected height 14321 01.10.2003 -fixed graphical error in top surface 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -new model 11180 added 01.11.2004 -modifications for Skandinavian and Russian market 01.09.2003 -3d rebuild for AC8 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.03.2005 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.05.2009 -renamed furniture series 01.05.2009 -outgoing supportframe and brackets 01.11.2004 -modifications for skandinavian and russian market 01.09.2003 -3D for supportframes and brackets 01.09.2003 -bottom shape made wider, to not overlap inside of basin 01.09.2003 -mirroring made ineffective, to give right product info even if mirror 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.05.2009 -renamed furniture series 01.05.2009 -outgoing supportframe and brackets 01.11.2004 -modifications for skandinavian and russian market 01.09.2003 -3D for supportframes and brackets 01.09.2003 -bottom shape made wider, to not overlap inside of basin 01.09.2003 -mirroring made ineffective, to give right product info even if mirror 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2013 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2013 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2013 -initial release

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.bimlab.fi changelog 01.01.2009 -new installationfixtures 01.11.2004 -autocad features 01.03.2004 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 1.3.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.03.2004 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.03.2005 -update 01.03.2004 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.03.2004 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.03.2005 -update 01.03.2004 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2013 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2013 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2009 -Trend series new productcodes 15.06.2006 -oak frame 01.03.2005 -renamed furniture series 01.03.2005 -modifications for skandinavian and russian market 01.10.2003 -info about handles 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2009 -Trend series new productcodes 15.06.2006 -oak frame 01.03.2005 -renamed furniture series 01.03.2005 -modifications for skandinavian and russian market 01.10.2003 -info about handles 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.03.2005 -renamed furniture series 01.03.2005 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -initial release

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -all new cabinets 01.09.2008 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -initial release

#http://www.idobathroom.com www.archiapu.fi changelog 01.07.2010 -new product 01.11.2004 -modifications for skandinavian and russian market 01.11.2003 -corrected ean-code for towel rail 01.10.2003 -fixed graphical error in outlet 01.09.2003 -3d for brackets 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2007 -new door 74 15.06.2006 -door 60 not available 01.03.2005 -renamed furniture series 01.03.2005 -modifications for skandinavian and russian market 01.11.2003 -info-text handles included 01.11.2003 -ean-code added 93231 01.10.2003 -fixed front adapter arch 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 15.06.2006 -door 60 not available 01.03.2005 -renamed furniture series 01.03.2005 -modifications for skandinavian and russian market 01.11.2003 -info-text handles included 01.11.2003 -ean-code added 93231 01.10.2003 -fixed front adapter arch 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2007 -new door 74 15.06.2006 -door 60 not available 01.03.2005 -renamed furniture series 01.03.2005 -modifications for skandinavian and russian market 01.11.2003 -info-text handles included 01.11.2003 -ean-code added 93231 01.10.2003 -fixed front adapter arch 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.05.2009 -new washbasin for 93189 01.03.2005 -renamed furniture series 01.03.2005 -modifications for skandinavian and russian market 01.11.2003 -info-text handles included 01.11.2003 -ean-code added 93231 01.10.2003 -fixed front adapter arch 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 15.06.2006 -door 60 not available 01.03.2005 -renamed furniture series 01.03.2005 -modifications for skandinavian and russian market 01.11.2003 -info-text handles included 01.11.2003 -ean-code added 93231 01.10.2003 -fixed front adapter arch 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -change in colours and design 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.03.2005 -renamed furniture series 01.03.2005 -modifications for skandinavian and russian market 01.10.2003 -3D material for lamp 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -initial release

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -painonappi 69080 korvattu napilla 69083 -napit 69084, 69086 ja 69087 lisätty -installation fixture 91372 lisätty 01.09.2008 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -painonappi 69080 korvattu napilla 69083 -napit 69084, 69086 ja 69087 lisätty -installation fixture 91372 lisätty 01.09.2008 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -painonappi 69080 korvattu napilla 69083 -napit 69084, 69086 ja 69087 lisätty -installation fixture 91372 lisätty 01.09.2008 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.03.2005 -initial release

#http://www.idobathroom.com www.archiapu.fi changelog 01.09.2007 -new and outgoing products 01.03.2005 -initial release

#http://www.idobathroom.com www.archiapu.fi changelog 01.01.2009 -reorganized, 3d position repaired 01.09.2007 -outgoing products 15.06.2006 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2013 -initial release

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.bimlab.fi changelog 01.11.2004 -object renamed, name before "d1 Pozzi-Gri wall-hung bide" 01.11.2004 -modifications for skandinavian and russian market 01.10.2003 -installation fixture added 01.10.2003 -3D modified 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -painonappi 69080 korvattu napilla 69083 -napit 69084, 69086 ja 69087 lisätty -installation fixture 91372 lisätty 01.09.2008 -initial release

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -all new cabinets 01.09.2008 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2008 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -all new cabinets 01.09.2008 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 15.06.2006 -door 60 not available 01.03.2005 -renamed furniture series 01.03.2005 -modifications for skandinavian and russian market 01.11.2003 -info-text handles included 01.11.2003 -ean-code added 93231 01.10.2003 -fixed front adapter arch 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2008 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -new products, 2 drawers 01.02.2007 -initial release 01.09.2008 -new prodactcodes for frame

#http://www.idobathroom.com www.bimlab.fi changelog 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.03.2005 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 2014 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 2014 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.11.2004 -modifications for skandinavian and russian market 01.03.2004 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 07.10.2011 -initial release

#http://www.idobathroom.com www.archiapu.fi changelog 01.11.2004 -modifications for skandinavian and russian market 01.10.2003 -curtain rail and base added 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 07.10.2011 -initial release

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.bimlab.fi changelog 01.01.2009 -new size 1700x700 01.11.2004 -modifications for skandinavian and russian market 01.10.2003 -side panel hight adjustment and 3d correction 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.11.2004 -modifications for skandinavian and russian market 01.10.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.09.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.bimlab.fi

#http://www.idobathroom.com www.bimlab.fi changelog 15.06.2006 -supportleggs included 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -change in colours and design 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -change in colours 01.02.2007 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.07.2010 -change in colours 01.09.2008 -initial release

#http://www.idokylpyhuone.com www.archiapu.fi changelog 01.07.2010 -retaken in white 01.11.2004 -modifications for skandinavian and russian market 26.10.2004 -3D modified, error for cutpoly 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2013 -outgoing 11186 01.01.2009 -outgoing and new products 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2013 -outgoing 11186 01.01.2009 -outgoing and new products 01.11.2004 -modifications for skandinavian and russian market 01.03.2003 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.03.2005 -update 01.03.2004 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.04.2013 -initial release

#http://www.idobathroom.com www.bimlab.fi changelog 01.03.2005 -update 01.03.2004 -initial release

#http://www.molok.com Version Date Modified by Info ---------------------------------------------------------------------------------------------- 1.0 26.02.2010 JH Ready for use 1.1 24.09.2010 JH Simplier materials, Margins 2d / 3d, Margin hotspots 1.2 13.10.2010 JH Works together with all Molok-objects 1.3 21.10.2010 JH Modifications on volyme of biowaste / Composite framing option 1.4 16.12.2013 JH Fixed Lithera, updated usability 1.5 05.02.2015 JH UI-update compatible AC18, Lifting hook & Container 3D Käyttäjävastuu --------------------------------------------------------------------------------- GDL Factory tai Molok Oy eivät takaa objektien virheetöntä toimintaa. Objektien käyttäminen tapahtuu käyttäjän omalla vastuulla. GDL Factory tai Molok Oy eivät ole vastuussa, jos objektien käytöstä aiheutuu suoraa tai välillistä taloudellista tai muuta vahinkoa. Objektikirjasto tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.molok.com Version Date Modified by Info ---------------------------------------------------------------------------------------------- 1.0 26.02.2010 JH Ready for use 1.1 24.09.2010 JH Simplier materials, Margins 2d / 3d, Margin hotspots 1.2 13.10.2010 JH Works together with all Molok-objects 1.3 21.10.2010 JH Modifications on volyme of biowaste / Composite framing option 1.4 16.12.2013 JH Fixed Lithera, updated usability 1.5 05.02.2015 JH UI-update compatible AC18, Lifting hook & Container 3D Käyttäjävastuu --------------------------------------------------------------------------------- GDL Factory tai Molok Oy eivät takaa objektien virheetöntä toimintaa. Objektien käyttäminen tapahtuu käyttäjän omalla vastuulla. GDL Factory tai Molok Oy eivät ole vastuussa, jos objektien käytöstä aiheutuu suoraa tai välillistä taloudellista tai muuta vahinkoa. Objektikirjasto tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.molok.com Version Date Modified by Info ---------------------------------------------------------------------------------------------- 1.0 26.02.2010 JH Ready for use 1.1 24.09.2010 JH Simplier materials, Margins 2d / 3d, Margin hotspots 1.2 13.10.2010 JH Works together with all Molok-objects 1.3 21.10.2010 JH Modifications on volyme of biowaste / Composite framing option 1.4 16.12.2013 JH Fixed Lithera, updated usability 1.5 05.02.2015 JH UI-update compatible AC18, Lifting hook & Container 3D Käyttäjävastuu --------------------------------------------------------------------------------- GDL Factory tai Molok Oy eivät takaa objektien virheetöntä toimintaa. Objektien käyttäminen tapahtuu käyttäjän omalla vastuulla. GDL Factory tai Molok Oy eivät ole vastuussa, jos objektien käytöstä aiheutuu suoraa tai välillistä taloudellista tai muuta vahinkoa. Objektikirjasto tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.molok.com Version Date Modified by Info ------------------------------------------------------------------------------------------- 0.95 27.8.2010 JH Usable 1.00 13.10.2010 JH Ready 1.01 21.10.2010 JH Bio waste volume to be shown approximately 1.10 16.12.2013 JH Improved usability 1.11 05.12.2015 JH UI-update AC18 compatibility, lifting hook 1.2 16.02.2015 JH New covers, lids, properties, improved component counting 1.3 03.05.2017 JH new sign 1.4 12.05.2021 JH Drum lid, new waste types, lid colours ect. 1.5 25.08.2021 JH Printing facade Käyttäjävastuu --------------------------------------------------------------------------------- GDL Factory tai Molok Oy eivät takaa objektien virheetöntä toimintaa. Objektien käyttäminen tapahtuu käyttäjän omalla vastuulla. GDL Factory tai Molok Oy eivät ole vastuussa, jos objektien käytöstä aiheutuu suoraa tai välillistä taloudellista tai muuta vahinkoa. Objektikirjasto tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.molok.com Version Date Modified by Info ------------------------------------------------------------------------------------------- 0.95 27.8.2010 JH Usable 1.00 13.10.2010 JH Ready 1.01 21.10.2010 JH Bio waste volume to be shown approximately 1.10 16.12.2013 JH Improved usability 1.11 05.12.2015 JH UI-update AC18 compatibility, lifting hook 1.2 16.02.2015 JH New covers, lids, properties, improved component counting 1.3 03.05.2017 JH new sign 1.4 12.05.2021 JH Drum lid, new waste types, lid colours ect. 1.5 25.08.2021 JH Printing facade Käyttäjävastuu --------------------------------------------------------------------------------- GDL Factory tai Molok Oy eivät takaa objektien virheetöntä toimintaa. Objektien käyttäminen tapahtuu käyttäjän omalla vastuulla. GDL Factory tai Molok Oy eivät ole vastuussa, jos objektien käytöstä aiheutuu suoraa tai välillistä taloudellista tai muuta vahinkoa. Objektikirjasto tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.molok.com Version Date Modified by Info ------------------------------------------------------------------------------------------- 0.95 27.8.2010 JH Usable 1.00 13.10.2010 JH Ready 1.01 21.10.2010 JH Bio waste volume to be shown approximately 1.10 16.12.2013 JH Improved usability 1.11 05.12.2015 JH UI-update AC18 compatibility, lifting hook 1.2 16.02.2015 JH New covers, lids, properties, improved component counting 1.3 03.05.2017 JH new sign 1.4 12.05.2021 JH Drum lid, new waste types, lid colours ect. 1.5 25.08.2021 JH Printing facade Käyttäjävastuu --------------------------------------------------------------------------------- GDL Factory tai Molok Oy eivät takaa objektien virheetöntä toimintaa. Objektien käyttäminen tapahtuu käyttäjän omalla vastuulla. GDL Factory tai Molok Oy eivät ole vastuussa, jos objektien käytöstä aiheutuu suoraa tai välillistä taloudellista tai muuta vahinkoa. Objektikirjasto tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.molok.com Version Date Modified by Info ------------------------------------------------------------------------------------------- 0.95 27.8.2010 JH Usable 1.00 13.10.2010 JH Ready 1.01 21.10.2010 JH Bio waste volume to be shown approximately 1.10 16.12.2013 JH Improved usability 1.11 05.12.2015 JH UI-update AC18 compatibility, lifting hook 1.2 16.02.2015 JH New covers, lids, properties, improved component counting 1.3 03.05.2017 JH new sign 1.4 12.05.2021 JH Drum lid, new waste types, lid colours ect. 1.5 25.08.2021 JH Printing facade Käyttäjävastuu --------------------------------------------------------------------------------- GDL Factory tai Molok Oy eivät takaa objektien virheetöntä toimintaa. Objektien käyttäminen tapahtuu käyttäjän omalla vastuulla. GDL Factory tai Molok Oy eivät ole vastuussa, jos objektien käytöstä aiheutuu suoraa tai välillistä taloudellista tai muuta vahinkoa. Objektikirjasto tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.molok.com Version Date Modified by Info ------------------------------------------------------------------------------------------- 0.95 27.8.2010 JH Usable 1.00 13.10.2010 JH Ready 1.01 21.10.2010 JH Bio waste volume to be shown approximately 1.10 16.12.2013 JH Improved usability 1.11 05.12.2015 JH UI-update AC18 compatibility, lifting hook 1.2 16.02.2015 JH New covers, lids, properties, improved component counting 1.3 03.05.2017 JH new sign 1.4 12.05.2021 JH Drum lid, new waste types, lid colours ect. 1.5 25.08.2021 JH Printing facade Käyttäjävastuu --------------------------------------------------------------------------------- GDL Factory tai Molok Oy eivät takaa objektien virheetöntä toimintaa. Objektien käyttäminen tapahtuu käyttäjän omalla vastuulla. GDL Factory tai Molok Oy eivät ole vastuussa, jos objektien käytöstä aiheutuu suoraa tai välillistä taloudellista tai muuta vahinkoa. Objektikirjasto tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

#http://www.molok.com Version Date Modified by Info ------------------------------------------------------------------------------------------- 0.95 27.8.2010 JH Usable 1.00 13.10.2010 JH Ready 1.01 21.10.2010 JH Bio waste volume to be shown approximately 1.10 16.12.2013 JH Improved usability 1.11 05.12.2015 JH UI-update AC18 compatibility, lifting hook 1.2 16.02.2015 JH New covers, lids, properties, improved component counting 1.3 03.05.2017 JH new sign 1.4 12.05.2021 JH Drum lid, new waste types, lid colours ect. 1.5 25.08.2021 JH Printing facade Käyttäjävastuu --------------------------------------------------------------------------------- GDL Factory tai Molok Oy eivät takaa objektien virheetöntä toimintaa. Objektien käyttäminen tapahtuu käyttäjän omalla vastuulla. GDL Factory tai Molok Oy eivät ole vastuussa, jos objektien käytöstä aiheutuu suoraa tai välillistä taloudellista tai muuta vahinkoa. Objektikirjasto tarjotaan käyttöön sellaisenaan ja sen muokkaaminen on kielletty.

The INDI family luminaries have a minimalistic and simple design. They consist of an aluminium profile and are fitted with LED boards with a high efficiency. There is a built-in suspension system in the luminary to which different components as hooks etc. can be inserted. They are distinguished by a soft light the intensity of which can be set up. They can be used separately or extended to long lines and other shapes. The luminary can be mounted as suspended, surface mounted or wall one . The luminaries are suitable for business and administrative premises, corridors, hotels, cultural facilities and households. Luminaires from INDI family are available from 2015. Type of installation: [LIST] Suspended [/LIST]

The INDI family luminaries have a minimalistic and simple design. They consist of an aluminium profile and are fitted with LED boards with a high efficiency. There is a built-in suspension system in the luminary to which different components as hooks etc. can be inserted. They are distinguished by a soft light the intensity of which can be set up. They can be used separately or extended to long lines and other shapes. The luminary can be mounted as suspended, surface mounted or wall one . The luminaries are suitable for business and administrative premises, corridors, hotels, cultural facilities and households. Luminaires from INDI family are available from 2015. Type of installation: [LIST] Surface Suspended Wall mounted [/LIST]

The INDI family luminaries have a minimalistic and simple design. They consist of an aluminium profile and are fitted with LED boards with a high efficiency. There is a built-in suspension system in the luminary to which different components as hooks etc. can be inserted. They are distinguished by a soft light the intensity of which can be set up. They can be used separately or extended to long lines and other shapes. The luminary can be mounted as suspended, surface mounted or wall one . The luminaries are suitable for business and administrative premises, corridors, hotels, cultural facilities and households. Luminaires from INDI family are available from 2015. Type of installation: [LIST] Surface Wall mounted [/LIST]

[LIST] Type: Manual sliding door system with self-closing function without external power supply. The door is opened and then closes under its own spring power – thanks to a bungee cord pulley system designed for glass doors up to 120 kg (single panel door) Opening: 1-Leaf, 2-Leaf, Telescopic Panel: Glass and timber with both light and heavy doors (50 kg–200 kg). Laminated safety glass (LSG) Damping: DORMOTION cushioning mechanism – panel is decelerated in both its opening and closing directions and then drawn automatically to the end position. No glass preparation Installation: Wall, ceiling, lintel, glass overpanel installation and suspended ceilings Side lights: Optional Standards: EN 1527 with 200.000 cycles The product will be available mid/end 2015 (depends on variant). [/LIST]

[LIST] Horizontal sliding wall with double glazing and a surrounding frame made of thermally insulated profiles Different parking layouts available Bottom profile Thermal break and water channel (optional) Track rail with optional thermal break Insulation value U of approx. 1,5 W/m²K (with standard insulating glass) Meets the requirements of the German Energy Saving Ordinance EnEV Combined with door closer types TS 92, ITS 96 3-6, Push handles, ISEO Multilock Pivoting-sliding panels equipped with an ITS 96 3-6 concealed door closer Operation Easy, one-handed single throw of the lock bar to switch between the door and sliding functions, with no bending and no crank operation 40% improvement in thermal separation value (compared to the predecessor model) Heat transfer coefficient in accordance with DIN EN ISO 10077-1 and 10077-2 Endurance DIN 1527 Class 3 (25000 cycles) for suspend sliding doors > 100kg Impact DIN EN 13049 Class 3 Corrosion DIN EN 1670 Class 3 The product will be available end 2015 [/LIST]

[LIST] Horizontal Sliding Wall HSW EASY Safe, Standard Stacking Laminated safety glass with Clamp & Glue fixing technology Glass thicknesses from 10 to 19 mm Support profile for single-action and double-action pivoting-sliding panels with integrated slide channel Top rail can be optionally provided with an adhesive channel for the secure fixing of laminated safety glass Roller carrier mounting can be variably adjusted both at the support profile and at the door/glazing rail profile Combined with: Door Closers TS 92, ITS 96, ITS 96 2-4, BTS 80, BTS 84 Push handles, Office locks, center/corner locks, HSW-GP Double top and bottom brush seal profiles available Easy installation thanks to three-in-one multilock assembly Status indicator showing whether the panel is in the pivoting or sliding mode for enhanced safety The product will be available mid 2015. [/LIST]

TULPI is a LED moulding luminaire for business premises proposed within co-operation with UMPRUM industrial design atelier. The luminaire has excellent technical and light parameters and exceptional design that distinguishes it from the other products on the market. The body of the reflector is part of the same mould as the driver covering, facilitating production and achieving a playful look. The luminaires can be equipped in addition to highly luminous LED with colour rendering index Ra>80 or Ra>90 also with LED sources with RealColour technology ensuring extremely high rendering index Ra>97. The RealColour luminaires are suitable in particular for illumination of the exhibits where perfect colour fidelity is required. The luminaires with RealWhite technology are intended for the cases when it is necessary to ensure the white colour without the tints of other colours. For specific requirements, where the aim is to intensify certain colours of the illuminated objects a wide range of StrongColour variants is available, here you can find for example special luminaires for illumination of meat, jewellery etc. The design of the luminaire was awarded by Red Dot Award Design Concept 2015. Design Matyáš Kočnar. Availability from 06/2016

TORPI is a LED moulding luminaire for business premises proposed within co-operation with UMPRUM industrial design atelier. The luminaire has excellent technical and light parameters and exceptional design that distinguishes it from the other products on the market. The body of the reflector is part of the same mould as the driver covering, facilitating production and achieving a playful look. The luminaires can be equipped in addition to highly luminous LED with colour rendering index Ra>80 or Ra>90 also with LED sources with RealColour technology ensuring extremely high rendering index Ra>97. The RealColour luminaires are suitable in particular for illumination of the exhibits where perfect colour fidelity is required. The luminaires with RealWhite technology are intended for the cases when it is necessary to ensure the white colour without the tints of other colours. For specific requirements, where the aim is to intensify certain colours of the illuminated objects a wide range of StrongColour variants is available, here you can find for example special luminaires for illumination of meat, jewellery etc. The design of the luminaire was awarded by Red Dot Award Design Concept 2015. Design Matyáš Kočnar. Availability from 06/2016

TWIG is a LED moulding luminaire for business premises proposed within co-operation with UMPRUM industrial design atelier. The luminaire has excellent technical and light parameters and exceptional design that distinguishes it from the other products on the market. TWIG has a compact, minimalist and original design and meets all technical parameters. The design of the luminaire was awarded by Red Dot Award Design Concept 2015. Design Eva Petříková. Availability from 10/2016

Revit 2015 and ArchiCAD

Quantum is a ceiling-mounting recessed luminaire with an organic roundish form. The deep-recessed optical compartment ensures perfect integration into the surrounding architecture thanks to its soft and sinuous lines. The downlight is characterized by a group made up of a reflector with F.O.L.™ filtering system and a recessed LED source, thus providing visual comfort and a highly pure beam. Among the product distinguishing features, the well-proportioned appearance given by its optical compartment with embossed or "warm&chic" golden finish, a plus which has earned it the Red Dot Award in 2015. Quantum is particularly suitable for illuminating shops, hotels and private homes.

Quantum is a ceiling-mounting recessed luminaire with an organic roundish form. The deep-recessed optical compartment ensures perfect integration into the surrounding architecture thanks to its soft and sinuous lines. The downlight is characterized by a group made up of a reflector with F.O.L.™ filtering system and a recessed LED source, thus providing visual comfort and a highly pure beam. Among the product distinguishing features, the well-proportioned appearance given by its optical compartment with embossed or "warm&chic" golden finish, a plus which has earned it the Red Dot Award in 2015. Quantum is particularly suitable for illuminating shops, hotels and private homes.

Quantum is a ceiling-mounting recessed luminaire with an organic roundish form. The deep-recessed optical compartment ensures perfect integration into the surrounding architecture thanks to its soft and sinuous lines. The downlight is characterized by a group made up of a reflector with F.O.L.™ filtering system and a recessed LED source, thus providing visual comfort and a highly pure beam. Among the product distinguishing features, the well-proportioned appearance given by its optical compartment with embossed or "warm&chic" golden finish, a plus which has earned it the Red Dot Award in 2015. Quantum is particularly suitable for illuminating shops, hotels and private homes.

Quantum is a ceiling-mounting recessed luminaire with an organic roundish form. The deep-recessed optical compartment ensures perfect integration into the surrounding architecture thanks to its soft and sinuous lines. The downlight is characterized by a group made up of a reflector with F.O.L.™ filtering system and a recessed LED source, thus providing visual comfort and a highly pure beam. Among the product distinguishing features, the well-proportioned appearance given by its optical compartment with embossed or "warm&chic" golden finish, a plus which has earned it the Red Dot Award in 2015. Quantum is particularly suitable for illuminating shops, hotels and private homes.

Quantum is a ceiling-mounting recessed luminaire with an organic roundish form. The deep-recessed optical compartment ensures perfect integration into the surrounding architecture thanks to its soft and sinuous lines. The downlight is characterized by a group made up of a reflector with F.O.L.™ filtering system and a recessed LED source, thus providing visual comfort and a highly pure beam. Among the product distinguishing features, the well-proportioned appearance given by its optical compartment with embossed or "warm&chic" golden finish, a plus which has earned it the Red Dot Award in 2015. Quantum is particularly suitable for illuminating shops, hotels and private homes.

Quantum_Y is a ceiling-mounting recessed luminaire with an organic roundish form, characterized by an optical unit with asymmetric emission. The deep-recessed optical compartment ensures perfect integration into the surrounding architecture thanks to its soft and sinuous lines. The downlight is characterized by a group made up of a reflector with F.O.L.™ filtering system and a recessed LED source, thus ensuring visual comfort and a highly pure beam. Among the product distinguishing features, the well-proportioned appearance given by its optical compartment with embossed or "warm&chic" golden finish, a plus which has earned it the Red Dot Award in 2015. The asymmetric light beam makes this luminaire particularly suitable for illuminating walls.

Quantum_Y is a ceiling-mounting recessed luminaire with an organic roundish form, characterized by an optical unit with asymmetric emission. The deep-recessed optical compartment ensures perfect integration into the surrounding architecture thanks to its soft and sinuous lines. The downlight is characterized by a group made up of a reflector with F.O.L.™ filtering system and a recessed LED source, thus ensuring visual comfort and a highly pure beam. Among the product distinguishing features, the well-proportioned appearance given by its optical compartment with embossed or "warm&chic" golden finish, a plus which has earned it the Red Dot Award in 2015. The asymmetric light beam makes this luminaire particularly suitable for illuminating walls.

Quantum_Y is a ceiling-mounting recessed luminaire with an organic roundish form, characterized by an optical unit with asymmetric emission. The deep-recessed optical compartment ensures perfect integration into the surrounding architecture thanks to its soft and sinuous lines. The downlight is characterized by a group made up of a reflector with F.O.L.™ filtering system and a recessed LED source, thus ensuring visual comfort and a highly pure beam. Among the product distinguishing features, the well-proportioned appearance given by its optical compartment with embossed or "warm&chic" golden finish, a plus which has earned it the Red Dot Award in 2015. The asymmetric light beam makes this luminaire particularly suitable for illuminating walls.

Quantum J_1 is a ceiling-mounting directional recessed luminaire with an organic roundish form. The deep-recessed optical compartment ensures perfect integration into the surrounding architecture thanks to its soft and sinuous lines. The downlight is characterized by a group made up of a reflector with F.O.L.™ filtering system and a recessed LED source, thus providing visual comfort and a highly pure beam. Among the product distinguishing features, the well-proportioned appearance given by its optical compartment with embossed or "warm&chic" golden finish, a plus which has earned it the Red Dot Award in 2015. Quantum is particularly suitable for illuminating shops, hotels and private homes.

Quantum J_1 is a ceiling-mounting directional recessed luminaire with an organic roundish form. The deep-recessed optical compartment ensures perfect integration into the surrounding architecture thanks to its soft and sinuous lines. The downlight is characterized by a group made up of a reflector with F.O.L.™ filtering system and a recessed LED source, thus providing visual comfort and a highly pure beam. Among the product distinguishing features, the well-proportioned appearance given by its optical compartment with embossed or "warm&chic" golden finish, a plus which has earned it the Red Dot Award in 2015. Quantum is particularly suitable for illuminating shops, hotels and private homes.

Quantum J_1 is a ceiling-mounting directional recessed luminaire with an organic roundish form. The deep-recessed optical compartment ensures perfect integration into the surrounding architecture thanks to its soft and sinuous lines. The downlight is characterized by a group made up of a reflector with F.O.L.™ filtering system and a recessed LED source, thus providing visual comfort and a highly pure beam. Among the product distinguishing features, the well-proportioned appearance given by its optical compartment with embossed or "warm&chic" golden finish, a plus which has earned it the Red Dot Award in 2015. Quantum is particularly suitable for illuminating shops, hotels and private homes.

Quantum J_1 is a ceiling-mounting directional recessed luminaire with an organic roundish form. The deep-recessed optical compartment ensures perfect integration into the surrounding architecture thanks to its soft and sinuous lines. The downlight is characterized by a group made up of a reflector with F.O.L.™ filtering system and a recessed LED source, thus providing visual comfort and a highly pure beam. Among the product distinguishing features, the well-proportioned appearance given by its optical compartment with embossed or "warm&chic" golden finish, a plus which has earned it the Red Dot Award in 2015. Quantum is particularly suitable for illuminating shops, hotels and private homes.

Quantum_J2 is a ceiling-mounting directional recessed luminaire with an organic roundish form. The deep-recessed optical compartment ensures perfect integration into the surrounding architecture thanks to its soft and sinuous lines. The downlight is characterized by a group made up of a reflector with F.O.L.™ filtering system and a recessed LED source, thus providing visual comfort and a highly pure beam. Among the product distinguishing features, the well-proportioned appearance given by its optical compartment with embossed or "warm&chic" golden finish, a plus which has earned it the Red Dot Award in 2015. Quantum is particularly suitable for illuminating shops, hotels and private homes.

Quantum_J2 is a ceiling-mounting directional recessed luminaire with an organic roundish form. The deep-recessed optical compartment ensures perfect integration into the surrounding architecture thanks to its soft and sinuous lines. The downlight is characterized by a group made up of a reflector with F.O.L.™ filtering system and a recessed LED source, thus providing visual comfort and a highly pure beam. Among the product distinguishing features, the well-proportioned appearance given by its optical compartment with embossed or "warm&chic" golden finish, a plus which has earned it the Red Dot Award in 2015. Quantum is particularly suitable for illuminating shops, hotels and private homes.

Quantum_J2 is a ceiling-mounting directional recessed luminaire with an organic roundish form. The deep-recessed optical compartment ensures perfect integration into the surrounding architecture thanks to its soft and sinuous lines. The downlight is characterized by a group made up of a reflector with F.O.L.™ filtering system and a recessed LED source, thus providing visual comfort and a highly pure beam. Among the product distinguishing features, the well-proportioned appearance given by its optical compartment with embossed or "warm&chic" golden finish, a plus which has earned it the Red Dot Award in 2015. Quantum is particularly suitable for illuminating shops, hotels and private homes.

URSA PUREONE is a mineral wool product used in thermal and acoustic insulation of buildings which offers a high performance and many advantages: High performance. URSA PUREONE offers an excellent thermal and acoustic insulation. Its composition technology allows URSA offer a Warranty of 25 years. Its soft-touching, it does not generate dust, fire resistant... The acrylic base technology of its binder grants its high performance. Easy to install. Its soft-touching, it does not generate dust, it does not make the skin get irritated,… It has obtain the First Award 2014- 2015 in “Trophées de la Maison”. Best Inner Air Quality. The URSA PUREONE technology has a 0% of emission of COV, optimizing the quality of the inner air.

URSA PUREONE is a mineral wool product used in thermal and acoustic insulation of buildings which offers a high performance and many advantages: High performance. URSA PUREONE offers an excellent thermal and acoustic insulation. Its composition technology allows URSA offer a Warranty of 25 years. Its soft-touching, it does not generate dust, fire resistant... The acrylic base technology of its binder grants its high performance. Easy to install. Its soft-touching, it does not generate dust, it does not make the skin get irritated,… It has obtain the First Award 2014- 2015 in “Trophées de la Maison”. Best Inner Air Quality. The URSA PUREONE technology has a 0% of emission of COV, optimizing the quality of the inner air.

URSA PUREONE is a mineral wool product used in thermal and acoustic insulation of buildings which offers a high performance and many advantages: High performance. URSA PUREONE offers an excellent thermal and acoustic insulation. Its composition technology allows URSA offer a Warranty of 25 years. Its soft-touching, it does not generate dust, fire resistant... The acrylic base technology of its binder grants its high performance. Easy to install. Its soft-touching, it does not generate dust, it does not make the skin get irritated,… It has obtain the First Award 2014- 2015 in “Trophées de la Maison”. Best Inner Air Quality. The URSA PUREONE technology has a 0% of emission of COV, optimizing the quality of the inner air.

URSA PUREONE is a mineral wool product used in thermal and acoustic insulation of buildings which offers a high performance and many advantages: High performance. URSA PUREONE offers an excellent thermal and acoustic insulation. Its composition technology allows URSA offer a Warranty of 25 years. Its soft-touching, it does not generate dust, fire resistant... The acrylic base technology of its binder grants its high performance. Easy to install. Its soft-touching, it does not generate dust, it does not make the skin get irritated,… It has obtain the First Award 2014- 2015 in “Trophées de la Maison”. Best Inner Air Quality. The URSA PUREONE technology has a 0% of emission of COV, optimizing the quality of the inner air.

URSA PUREONE is a mineral wool product used in thermal and acoustic insulation of buildings which offers a high performance and many advantages: High performance. URSA PUREONE offers an excellent thermal and acoustic insulation. Its composition technology allows URSA offer a Warranty of 25 years. Its soft-touching, it does not generate dust, fire resistant... The acrylic base technology of its binder grants its high performance. Easy to install. Its soft-touching, it does not generate dust, it does not make the skin get irritated,… It has obtain the First Award 2014- 2015 in “Trophées de la Maison”. Best Inner Air Quality. The URSA PUREONE technology has a 0% of emission of COV, optimizing the quality of the inner air.

URSA PUREONE is a mineral wool product used in thermal and acoustic insulation of buildings which offers a high performance and many advantages: High performance. URSA PUREONE offers an excellent thermal and acoustic insulation. Its composition technology allows URSA offer a Warranty of 25 years. Its soft-touching, it does not generate dust, fire resistant... The acrylic base technology of its binder grants its high performance. Easy to install. Its soft-touching, it does not generate dust, it does not make the skin get irritated,… It has obtain the First Award 2014- 2015 in “Trophées de la Maison”. Best Inner Air Quality. The URSA PUREONE technology has a 0% of emission of COV, optimizing the quality of the inner air.

Freiformfenster: Nach dem Einsetzen kann man: im Grundriss einen Aufriss dazuschalten und darin (und im 3D) mittels eines erweiterbaren Polygons jede beliebige segmentierte Kontur innerhalb der Fenstermaße verziehen und durch neu generierte Punkte erweitern. Einzelprofillängen und Gesamtlängen der Profile werden hingeschrieben. Anfasser-Hilfstexte sind sichtbar. Farbschraffuren können über project2 dazugeschaltet werden. Weiters kann man - ausgehend von außen gelegenen Anfassern - waagrechte und senkrechte Teilungsprofile in die Kontur ziehen, ablängen und im Winkel anpassen. (bis zu 20 Stück) Dann kann man rechteckige Fensterflügel in die Kontur ziehen und an das zuvor hergestellte Raster einpassen (bis zu 10 Stück) Das Fenster benötigt als absolut notwendige Grundlage derzeit an einen mehrschalige Wandaufbau mit Putz, Wärmedämmung, tragender Schichtem Innenputz. Die beiden äußeren Schichten bis zur Kernschichte werden automatisch ausgemassen und der Fensterrahmen automatisch bündig mit der Kernschichte plaziert Es kann ein Schichteinzug eingeschaltet werden, der dann auch im Schnitt funktioniert. Dabei ist allerdings die Trennlinie aussen sichtbar. bei automatischer Überdämmung nicht. Die Nutzung der Solidelemente Befehle wurde besser eingabaut. nun werden eingezogene Fensterflügel von allen Rahmenelementen abgezogen. Die Rahmenelemente werdengenauso wie die Fensterflügel vom Glas abgezogen. Bei automatischer Überdämmungsdarstellung wurde mit den Wallnichen befehlen gearbeitet. Dazu wurde eine Funktion zum Parallelverschieben der Kontur eingebaut - nicht die addon derPOLYGON-OPERATIONSERWEITERUNG genutz, sondern eine eigene GDL-Lösung. Es wurden im Grundriss ein zusätzlicher Anfasser eingebaut, um den Stock in der Tiefe verschieben zu können. Die Grundrissdarstellung wurde mit Wallblock ergänzt und die Schichten des Putzeinzuges erkennen nun die Schichtdicken. 19.12.2015: Im Grundriss wietere Hotspots für symbolische Darstellung hinzugefügt: nun ist nicht nur für Stockprofilmaße, sondern auch für Rahmenelemente und Fensterrahmen das Profil beim 1. Element stellbar. Die Tiefe des gesamt-Elementes in der Wand kann verstellt werden. Das Einsetzen in eine einschalige Wand ist möglich. Die Kontur kann nun bis an den Rand von A und B geführt werden. Tutorial unter: https://www.youtube.com/watch?v=VzkindxTceQ EduAut19 pln-File mit Beispielen: https://www.dropbox.com/s/afdhmlwoi6td0y3/Multifenster9_12_2015.pln?dl=0

freeform window polygonal: After inserting - there will be displayed a 2D elevation over the wallopening in 2D - to turn off later. You can here drag the outer corners to the wanted maximal measures (A+B) and then drag the inner-polygonepoints wherever you want within the outer rectangele. Avoid small segments. Then You can drag in vertival and horizontal divisors and lengthen them in Your elevation as You need it or change the angle of each element. Then You can drag in rectangulear windows into the freeform up to 10 times. (You should construcht rectangular devisors for it before - to situate the casements correct later.) All elements will be put together automaticly und all holes will be cut out automatic. All you see in the 2D - elevation drawing will appear in 3D and the most of the operations you cam make in the groundfloor-2D-Elevation is also possible in 3D and a real elevation -view. a short Video-tutorial: https://www.youtube.com/watch?v=HJLPn90GrFQ&feature=youtu.be

Freiformfenster: Nach dem Einsetzen kann man: im Grundriss einen Aufriss dazuschalten und darin (und im 3D) mittels eines erweiterbaren Polygons jede beliebige segmentierte Kontur innerhalb der Fenstermaße verziehen und durch neu generierte Punkte erweitern. Einzelprofillängen und Gesamtlängen der Profile werden hingeschrieben. Anfasser-Hilfstexte sind sichtbar. Farbschraffuren können über project2 dazugeschaltet werden. Weiters kann man - ausgehend von außen gelegenen Anfassern - waagrechte und senkrechte Teilungsprofile in die Kontur ziehen, ablängen und im Winkel anpassen. (bis zu 20 Stück) Dann kann man rechteckige Fensterflügel in die Kontur ziehen und an das zuvor hergestellte Raster einpassen (bis zu 10 Stück) Das Fenster benötigt als absolut notwendige Grundlage derzeit an einen mehrschalige Wandaufbau mit Putz, Wärmedämmung, tragender Schichtem Innenputz. Die beiden äußeren Schichten bis zur Kernschichte werden automatisch ausgemassen und der Fensterrahmen automatisch bündig mit der Kernschichte plaziert Es kann ein Schichteinzug eingeschaltet werden, der dann auch im Schnitt funktioniert. Tutorial unter: https://www.youtube.com/watch?v=VzkindxTceQ EduAut19 pln-File mit Beispielen: https://www.dropbox.com/s/afdhmlwoi6td0y3/Multifenster8_12_2015.pln?dl=0

Freiformfenster: Nach dem Einsetzen kann man: im Grundriss einen Aufriss dazuschalten und darin (und im 3D) mittels eines erweiterbaren Polygons jede beliebige segmentierte Kontur innerhalb der Fenstermaße verziehen und durch neu generierte Punkte erweitern. Einzelprofillängen und Gesamtlängen der Profile werden hingeschrieben. Anfasser-Hilfstexte sind sichtbar. Farbschraffuren können über project2 dazugeschaltet werden. Weiters kann man - ausgehend von außen gelegenen Anfassern - waagrechte und senkrechte Teilungsprofile in die Kontur ziehen, ablängen und im Winkel anpassen. (bis zu 20 Stück) Dann kann man rechteckige Fensterflügel in die Kontur ziehen und an das zuvor hergestellte Raster einpassen (bis zu 10 Stück) Das Fenster benötigt als absolut notwendige Grundlage derzeit an einen mehrschalige Wandaufbau mit Putz, Wärmedämmung, tragender Schichtem Innenputz. Die beiden äußeren Schichten bis zur Kernschichte werden automatisch ausgemassen und der Fensterrahmen automatisch bündig mit der Kernschichte plaziert Es kann ein Schichteinzug eingeschaltet werden, der dann auch im Schnitt funktioniert. Dabei ist allerdings die Trennlinie aussen sichtbar. bei automatischer Überdämmung nicht. Die Nutzung der Solidelemente Befehle wurde besser eingabaut. nun werden eingezogene Fensterflügel von allen Rahmenelementen abgezogen. Die Rahmenelemente werdengenauso wie die Fensterflügel vom Glas abgezogen. Bei automatischer Überdämmungsdarstellung wurde mit den Wallnichen befehlen gearbeitet. Dazu wurde eine Funktion zum Parallelverschieben der Kontur eingebaut - nicht die addon derPOLYGON-OPERATIONSERWEITERUNG genutz, sondern eine eigene GDL-Lösung. Es wurden im Grundriss ein zusätzlicher Anfasser eingebaut, um den Stock in der Tiefe verschieben zu können. Die Grundrissdarstellung wurde mit Wallblock ergänzt und die Schichten des Putzeinzuges erkennen nun die Schichtdicken. 19.12.2015: Im Grundriss wietere Hotspots für symbolische Darstellung hinzugefügt: nun ist nicht nur für Stockprofilmaße, sondern auch für Rahmenelemente und Fensterrahmen das Profil beim 1. Element stellbar. Die Tiefe des gesamt-Elementes in der Wand kann verstellt werden. Das Einsetzen in eine einschalige Wand ist möglich. Tutorial unter: https://www.youtube.com/watch?v=VzkindxTceQ EduAut19 pln-File mit Beispielen: https://www.dropbox.com/s/afdhmlwoi6td0y3/Multifenster9_12_2015.pln?dl=0